DOCSLIB.ORG

MEASURING and MARKING Tools

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
MEASURING and MARKING Tools Measuring & Marking Measuring & Marking OUTLETS NATIONWIDE 522 Measuring & Marking Solutions for every aspect of measuring and marking for professionals in any business. All products are accurate to international specifications and carry our comprehensive warranty and lifetime replacement policy. 524-527 527 528-530 530-534 534-536 Tapes & Rules Measuring Wheels Squares & Bevels Measuring Gauges Dial Indicators & Stands 536 536-544 545-547 547-548 549 Counters Micrometers Verniers Calipers, Dividers & Scribers Compasses 550 551 551-553 553 554 Specialised Marking Tools Chalks, Crayons & Pencils Chalklines & Refills Marking Gauges Stencils 554-555 556 Levels Surveyors Tools Measuring & Marking AVAILABLE FROM SELECTED 523 Quick Find Index DISTRIBUTORS NATIONWIDE POWER TAPE - SOFT GRIP WITH AUTOLOCK MEASURING TAPE - RUBBER ! Magnetic hook ! Top stop secures tape in place ! Non-slip grip rubber case is robust and impact resistant ! Clearly marked blade with ! Automatic blade lock (BLADE LOCKS ITSELF WHEN PULLED OUT) metric graduations ! ! Push button retrieval Extra tough impact resistant ABS case with sure-grip ! Chrome belt clip rubber shroud ! Power return blade glides back into case automatically with smooth rewind action Code Size MTS4800 3m x 16mm Code Size MTS4805 5m x 19mm RIC4167 3m x 13mm MTS4810 7.5m x 25mm RIC4170 5m x 19mm MTS4815 10m x 25mm RIC4180 7.5m x 25mm TAPE - SHOX MEASURING TAPE - ABS ! Positive brake action locks ! Expert quality, finely engineered tapes blade solidly in hand are renowned for reliability ! Sliding end hook ! Extra tough impact resistant ensures ABS case with belt clip and measuremen chrome look finish t starts at ! zero Power return blade glides back into case automatically ! Easy grip with smooth rewind action rubber case with ! finger groove Top stop secures tape in place ! Tuff coat glare free blade ! Clearly marked blade with metric graduations Code Size Ref FRE2300 3m x 13mm SH03 Code Size Ref Code Size FRE2315 5m x 19mm SH519 FRE2325 8m x 25mm SH08 RIC4150 3m x 13mm FRE2320 5m x 25mm SH525 FRE2330 10m x 25mm SH140 RIC4160 5m x 16mm FLUORESCENT TAPE - EASILOK TAPE MEASURE - XL FATMAX ! ! Armor coating on first 150mm of the blade “True-Zero” for accurate inside and ! Green ABS case reduces the risk of breaking by 95% outside measurements ! ! Click action stopper ! Cushion grip provides Specially designed hook grabs on ! Dual marked - sturdy slip resistant hold side, top or bottom for versatility ! mm/inch ! Standout of 4m for easy Belt clip one person reading ! 32mm wide blade for easy number reading ! MYLAR® coated blade is up to 10x more resistant to abrasion Code Size Ref Code Size STA5944 5m x 32mm 33-887 FRE2000 3m x 13mm STA5945 8m x 32mm 33-892 FRE2005 5m x 19mm STA5947 10m x 32mm 33-897 TAPE MEASURE - TYLON TAPE MEASURE - POWERLOCK ! ! Blade BI-Material ! “True-Zero” hook for accurate Durable metal chrome plated case ! ! Compact and ergonomic bi inside and outside Unique MYLAR coating protects three colour material case measurements blade graphics for up to 10x more life ! ! ! Blade coated with Tylon Belt clip for easy storage Automatic blade return with thumb operated TM giving greater lock durability and wear ! New 3 rivet hook mounted on metal plate, resistance eliminates hook breakage ! ! Mat finish blade “Tru–Zero” hook for accurate inside and reduces outside measurements glare/reflection for easy ! Detachable steel belt clip reading Code Size Ref Code Size Ref STA6000 3m x 13mm 33-218 STA5956 3m x 13mm 0-30-607 STA6010 5m x 19mm 33-194 STA5957 5m x 19mm 0-30-697 STA6030 8m x 25mm 33-168 STA5958 8m x 25mm 0-30-657 STA5980 10m x 25mm 33-448 Measuring & Marking Tape Measures 524 MEASURING TAPE - PLASTIC CASE PROFESSIONAL TAPE - RUBBER CASE ! Sliding lock to secure blade ! Fast lock to secure blade ! Stand out 1.2m ! Stand out 1.4m ! Acrylic blade coating ! Nylon blade coating twice durability of Acrylic blade coating ! 2 rivets and hooked end on tape ! Hook magnets + 2 rivets + 1 eyelet for multi-use with extra strength ! Double sided blade print for easy readability from all angles Code Size Ref. Code Ref. Ref. IRW6600 3m x 13mm 10507784 IRW6630 3m x 16mm 10507790 IRW6610 5m x 19mm 10507785 IRW6640 5m x 19mm 10507791 IRW6620 8m x 25mm 10507786 IRW6650 8m x 25mm 10507792 TAPE MEASURE - TYLON ROSS DIAMETER TAPE REPLACEMENT BLADE ! Blade BI-Material ! Not suitable for linear measurements ! Blade coated with Tylon TM giving greater durability and wear resistance ! Specially graduated to give diameter of curved objects by measuring circumferences ! Matt finish blade reduces glare/reflection for easy reading ! Read off from graduation portion the figures adjacent to zero line ! This is diameter of object being measured Code Size RAB2890 2m x 6mm RAB2900 3.5m x 13mm RAB2902 5m x 19mm Code Size Ref STA6075 5m x 19mm 33-497S FIBREGLASS TAPE MEASURE - TAPE MEASURE - PLASTIC CASE CLOSED FRAME ! ! ! Sturdy ABS case 13mm wide tape Heavy duty winding mechanism ! ! ! Heavy duty chrome plated winder PVC coated fibreglass Impact resistant plastic reel ! ! ! Coated steel tape Water & crease resistant EEC class III accuracy ! Metric graduations ! Metal end hook Code Size MTS4694 10m x 13mm Code Size Ref MTS4696 20m x 13mm FRE3025 10m x 13mm SB-10 MTS4698 30m x 13mm FRE3035 20m x 13mm SB-20 MTS4700 50m x 13mm FRE3040 30m x 13mm SB-40 STEEL TAPE MEASURE - CLOSED FRAME TAPE - FIBREGLASS ! ! Steel case Tough yet light weight red ABS case with ribs for easy handling and strong grip ! ! Heavy duty/chrome plated winder PVC Coated fibreglass tape ! ! Coated steel tape Wear, weather and crease resistant ! Non conductive ! Heavy duty winding mechanism Code Size Ref FRE2020 10m x 13mm FB10 FRE2025 15m x 13mm FB15 Code Size Ref FRE2030 20m x 13mm FB20 FRE2035 30m x 13mm FB30 FRE3050 30m x 13mm SW-30 FRE2037 50m x 13mm FB50 Measuring & Marking AVAILABLE FROM SELECTED 525 Tape Measures DISTRIBUTORS NATIONWIDE TAPE - CLOSED CASE TAPE - WORKMASTER ! High impact ABS closed case with ! Corrosion resistant, UV protected and ! Durable yellow high impact ABS case for strength rewind lever non conductive ! Features a blade guard and rollers of stainless steel for smooth ! Case perforated at rear to allow the tape ! Blade has washable PVC coating operation to be cleaned ! Steel blade with 2 colour graduations for ! Blade made from parallel fibre glass easy reading in all conditions threads reduces elasticity and improves ! Mylar® coating for maximum protection measuring accuracy against abrasion ! Tape has whit surface with 2mm ! Hook with spurs for ease of use graduations for precise measuring Code Size Ref STA5920 10m x 12mm 0-34-295 STA5930 30m x 12mm 0-34-297 Code Size Ref STA5935 50m x 12mm 0-34-298 STA6050 20m x 9.5mm 0-34-105 STA6055 30m x 9.5mm 0-34-108 STEEL TAPE MEASURE TAPE MEASURE FIBREGLASS POWER OPEN FRAME WINDER - OPEN FRAME ! 10mm wide tape ! High impact ABS open frame with rewind ! Metric graduations lever ratio 3:1 ! ! Metal end hook Hook tip on tape folds away ! ! Heavy duty winding mechanism Yellow fibreglass tape with black graduations ! Impact resistant plastic reel ! EEC class III accuracy Code Size MTS4702 30m x 12mm MTS4705 50m x 12mm Code Size Ref MTS4707 100m x 12mm STA5916 30m x 12.7mm 2-34-772 FIBREGLASS BLADE STEEL BLADE TAPE TAPE - OPEN FRAME OPEN FRAME ! Fibre glass tape ! Tempered steel blade rust ! Ideal for contractors and surveyors protected ! ! Design allows for easy cleaning of tape Ring end fitted with folding claw for ! easy single handed use Protruding marker at bottom of case ! assists measuring Impact resistant plastic case ! ! Long winder, easy grip knob facilitates Sturdy rewind handle quick rewinding Code Size Ref FRE2040 30m x 13mm FO-30 Code Size Ref FRE2045 50m x 13mm FO-50 FRE3060 50m x 13mm SO-50 FRE2050 100m x 13mm FO-100 FRE3070 100m x 13mm SO-100 FIBREGLASS TAPE MEASURE - TAPE MEASURE FIBREGLASS POWER OPEN FRAME WINDER - OPEN FRAME ! FAT MAX ! High impact ABS open frame with ! Fibre glass unbreakable reinforced rewind lever ratio3:1 tape ! Hook tip on tape folds away ! Power winder 3-I gear ratio ! Yellow fibre glass tape with black ! Rubber handle graduations ! Nylon / plastic bearing point Code Size Ref Code Size Ref STA5919 60m x 19mm 2-34-824 STA5940 60m x 12mm 34-795 Measuring & Marking Tape Measures 526 MEASURING WHEEL MEASURING WHEEL ! ! Measuring distance 0 - 9999m Push type measuring wheel ! ! Resets to zero at the push of a button Has long handle for easy use ! ! Error range +- 2% As wheel is pushed distance travelled is shown on meter ! Supplied in a convenient zip-up nylon carry bag ! Wheel can be instantly “zeroed” ! Very useful for longish distances, soccer fields etc ! Wheel has long lasting tread Code Size Code Range ROT1000 Std MTS4835 10km ROT1050 Braked STAINLESS STEEL RULES PRECISION STEEL RULES ! Made from stainless steel, these rules have a polished finish with permanently engraved clear to read graduations ! Stainlees steel ! Graduated in metric dimensions 0.5mm and 1mm on both ! Dual marked mm/inches ! edges Graduated both sides ! ! Reverse side of the rule has permanently Hanging hole engraved metric to imperial conversion table Code Size Code Size SHA1480 150mm GRO5200 150mm SHA1481 300mm GRO5205 300mm SHA1482 600mm GRO5210 600mm SHA1483 1000mm GRO5215 1000mm ROSS STEEL FOLDING RULE - 53 STRAIGHTEDGE - ALUMINIUM ! Sub-divided in mm, figured every 10 mm on both ! High quality extruded aluminium section sides of rule ! ! Bevelled one edge for easy reading and Stop joint marking of work piece ! Untipped ! Other edge is square which allows for line drawing ! Graduated in millimetres and centimetres ! Code Size Has wide groove on face to assist with positioning SHA1490 1m ! Has hole one end for hanging.
Load more

Recommended publications
  • An Inventory of US Navy Courses Suitable for Use in Training Civiliam
    DOCUMENT RESUME ED 118 915 CE 006 479 AUTHOR Rogers, William A., Jr.; Nisos, Michael J. TITLE An Inventory of U.S. Navy Courses Suitable for Use in Training Civiliam Personnel in Basic Technical Skills. INSTITUTION Aerospace Education Foundation, Washington, D.C.; Naval Inst., Annapolis, Md. SPONS AGENCY Maryland State Dept. of Education, Baltimore. PUB DATE 15 Apr 75 NOTE 336p. AVAILABLE. FROM For more detailed information about course contents, contact U.S. Naval Institute, Annapolis, Maryland 21402 (No price given) EDRS PRICE MF-$0.83 HC-$18.07 Plus Postage DESCRIPTORS Auto Mechanics (Occupation); Aviation Technology; *Catalogs; Construction Industry; Course Content; *Course Descriptions; *Educational Equipment; Electrical Occupations; Food Service Occupations; Marine Technicians; Medical Services; *Military Training; *Technical Education; Technical Occupations; Trade and Industrial Education IDENTIFIERS *Navy ABSTRACT An inventory of courses of study developed by the United States Navy which might be useful to other private and public institutions in training civilian students in basic technological skills is presented. Individual course reports contain the following information: course description, comments, course content (including blocks of instruction and hours), support materials,, training aids, equipment, tools, and supplies and materials. Courses are listed for the following career fields: air conditioning and refrigeration, audiovisual equipment (operation), audiovisual equipment (repair) , automotive trades, aviation trades,
    [Show full text]
  • Paul Sellers' Workbench Measurements and Cutting
    PAUL SELLERS’ WORKBENCH MEASUREMENTS AND CUTTING LIST PAUL SELLERS’ WORKBENCH MEASUREMENTS AND CUTTING LIST NOTE When putting together the cutting list for my workbench, I worked in imperial, the system with which I am most comfortable. I was not happy, however, to then provide direct conversions to metric because to be accurate and ensure an exact fit this would involve providing measurements in fractions of millimetres. When I do work in metric I find it more comfortable to work with rounded numbers, therefore I have created two slightly different sets of measurements. This means that in places the imperial measurement given is not a direct conversion of the metric measurement given. Therefore, I suggest you choose one or other of the systems and follow it throughout. © 2017 – Paul Sellers v2 PAUL SELLERS’ WORKBENCH MEASUREMENTS AND CUTTING LIST WOOD QTY DESCRIPTION SIZE (IMPERIAL) SIZE (METRIC) (THICK X WIDE X LONG) (THICK X WIDE X LONG) 4 Leg 2 ¾” x 3 ¾” x 34 ⅜” 70 x 95 x 875mm 1 Benchtop 2 ⅜” x 12” x 66” 65 x 300 x 1680mm 2 Apron 1 ⅝” x 11 ½” x 66” 40 x 290 x 1680mm 1 Wellboard 1” x 12 ½” x 66” 25 x 320 x 1680mm 4 Rail 1 ½” x 6” x 26” 40 x 150 x 654mm 2 Bearer 1 ¼” x 3 ¾” x 25” 30 x 95 x 630mm 4 Wedge ⅝” x 1 ½” x 9” 16 x 40 x 228mm 4 Wedge retainer ⅝” x 1 ½” x 4” 16 x 40 x 100mm HARDWARE QTY DESCRIPTION SIZE (IMPERIAL) SIZE (METRIC) 1 Vise 9” 225mm Dome head bolts (including nuts and washers) for 4 ⅜” x 5” 10 x 130mm bolting legs to aprons 2 Lag screws (with washers) for underside of vise ½” x 2 ½” 12 x 65mm 2 Lag screws for face
    [Show full text]
  • Marking and Cutting Gauges
    Well Stocked Shop Multi-Marker If you’re constantly resetting your gauge to a single measurement, a 3-in-1 Brass Wheel Marking Gauge second gauge, like Lee Valley’s brass Marking Gauge #153490, $15.99 05N65.01, $24.50 3-in-1 gauge, may solve the problem. leevalley.com This gauge sports a head that you Marking and can outfit with a pin, knife, or blade, so you can select the cutter best suited to the task at hand. Cutting Gauges What I like best about this tool is its size. More than one way to make your mark woods. Filing a flat on one side of Like a 4" square, the pin can correct the tendency the compact gauge By Jeff Day to tear out, but your best bet is to fits neatly into my cuttingpartner gauge it with a cutting gauge. apron pocket so it’s With a knife-edged marker, a always in easy reach. Marking and excels at making M cutting gauges crisp, clean lines across the any years ago when I A pin-headed gauge is good grain. Compared to a pin- began tooling up my shop, I for establishing lines parallel scratched line, the cutline helps quickly discovered how much One of my first purchases to the grain, such as you’d need prevent splintering and tear- I could accomplish with basic was the markingonly member gauge of the when laying out hinges, grooves out, a handy attribute when hand tools. Though many were gauge family that is technically for drawer bottoms, rabbets, or chiseling dovetails at their antiques, it wasn’t long before called a due to the thickness of a board when baseline.
    [Show full text]
  • Marking Gauge
    Online Extra accurate layouts with a Marking Gauge When it comes to fast and accurate layouts, this traditional tool will more than earns its keep in the woodworking shop. Thumb If I were to make a list of the If you take a look at the various the amount of brass details used screw most-used tools in my shop, the marking gauges being sold today, in the construction. The more marking gauge would be you’ll notice two distinct types. expensive gauges have brass thumb near the top. Even with the Some use a steel pin to scribe a line myriad of rulers, calipers, while others use a flat blade. This and digital measuring second type is often called a “cut- devices that are available ting gauge” because the blade slices today, it’s hard to beat this the wood fibers rather than tearing simple tool for accuracy them, like the pin-style marking and ease of use. gauges (see photos at right). Of the two, I prefer the blade-style gauge. Blade Wedge It scores a cleaner, crisper line. DESIGN. A marking gauge is one of those simple tools whose basic design hasn’t changed much over the years. It has a beam and an adjustable fence (or stock) that is Brass wear strip held in place with a thumb screw, or sometimes, a wedge. Fence The only other differences you’re (or stock) Beam likely to find between the various { A marking gauge (top) tears gauges on the market have to do its way across the wood, while with the level of fit and finish and a cutting gauge scores a line.
    [Show full text]
  • Methods to Check Dimensional Tolerances on Hollow Structural Sections
    HSS METHODS TO CHECK DIMENSIONAL TOLERANCES ON HOLLOW STRUCTURAL SECTIONS HSS: TECHNICAL BROCHURE TABLE OF CONTENTS FOREWARD 1-2 Outside Dimensions The following is published as a guide 3-4 Wall Thickness for the purchaser of hollow structural 5 Length and Straightness sections (HSS). Methods of checking dimensional tolerances, stipulated 6 Squareness of Sides in Section 11 of ASTM A500-20,* are 7-8 Corner Radius discussed in detail. When checking tolerances for ASTM A847, ASTM 9-10 Twist A1085, ASTM A1065 or other material, 11 STI Member Producers the permissible variations may differ from what is given here; however, the method of measurement is the same. All excerpts from ASTM A500 are formatted For additional information, please with a gray background as seen here. contact the HSS manufacturer or the Steel Tube Institute. *Excerpts from ASTM A500 reprinted with permission from ASTM A500/A500M-20, copyright ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428. A copy of the complete standard can be obtained from ASTM International at www.astm.org. Steel Tube Institute Methods to Check Dimensional Tolerances on Hollow Structural Sections steeltubeinstitute.org Version: 11/20 OUTSIDE DIMENSIONS MEASURING ROUND TUBING 11. PERMISSIBLE VARIATIONS IN DIMENSIONS METHOD 11.1 Outside Dimensions: 11.1.1 Round Structural Tubing—The outside diameter shall not Refer to Example 1 for a typical application. vary more than ±0.5 %, rounded to the nearest 0.005 in. [0.1 1 Measure at a position at least 2 inches from either end mm], from the specified outside diameter for specified outside of the HSS.
    [Show full text]
  • For the Steel and Engineering Industries
    Marking Protective Cleaners Industrial Products & Decorative & Lubricants Packaging Coatings Product Guide - Steel and Engineering Quality products inspired by innovation designed specifi cally for the Steel and Engineering Industries. www.dymark.com.au PROTECTION From the Elements Dy-Mark’s metal protection range has been specially formulated to prevent rust and corrosion. The range is ideal for preserving and protecting both new and old metal structures in both industrial and DIY applications. Featuring premium adhesion properties and superior coverage, Dy-Mark’s Metal Protection Range ensures long lasting results whilst providing protection against the harsh Australian environment. Ph: 1300 DYMARK (396 275) Fax: 1300 360 440 [email protected] www.dymark.com.au 10623DM PRODUCT GUIDE Zinc Gal Etch Primer Zinc Rich Corrosion Inhibitive Coating Fast Drying Premium Formula 400g [Qty 12], 250ml, 500ml, 1 L, 4 L 325g [Qty 12] Features & Benefi ts Features & Benefi ts • A zinc-rich high performance coating • Provides excellent adhesion for metal surfaces • Contains 91% zinc in dry fi lm that are diffi cult to bond to • Provides true galvanic protection to steel • Protects against corrosion and iron • Fast dry product • Excellent adhesion properties • Suitable for use on aluminium, galvanised iron, • Ideal for structural steelwork in industrial new steel, alloys and non-ferrous metals environments (tanks, pipes, fences and buildings) Silver Gal Rust Reformer Anti-Corrosive Bright Silver Finish 350g [Qty 12] 350g [Qty 12] Features & Benefi
    [Show full text]
  • Twist-Lock Marking Gauge
    X ζ Marking with a twist. This unusual X marking gauge is a snap to make o ea and easy to adjust with just a flick O δ χ of the wrist. Β. Putting It Together Twist-Lock Use a dense hardwood for the fence and the beam so these parts will wear well. Here are some things to keep in mind Marking Gauge when putting the gauge together: Make the fence first. After shaping the outside contours of the fence, drill Twist the Beam to Set This Gauge for Marking the hole in the center with a ^/4-in. Forstner bit. Use the drill press to ensure By Frank Klausz that the hole is square to the face of the fence. That way, the fence will lock marking gauge is useful for all fence for marking, you give the beam a square to the beam. Then use a scroll sorts of layout tasks, from mark- twist, and the fence locks tight and saw or coping saw to enlarge the hole as A ing mortises to laying out dove- square to the beam. shown, orienting the shoulder cut across tails. I rely on a gauge more often than a This cam-type action isn't new to the grain for strength. (See drawing.) pencil when marking because I like the marking gauges. You can sometimes Smooth any bumps with a half-round precise line width a gauge pin leaves and find old twist gauges at auctions, or you file so the sweep of the curve is fair. the ease with which it can be set to any can buy a modern gauge with this twist- I like to glue one or more ivory discs distance from the edge of a workpiece.
    [Show full text]
  • October 2019 Auction No
    Australian Arms Auctions Auctions Arms Australian 198 214 230 234 261 Australian Arms Auctions Auction No. 53 October 13th, 2019 13th, October 53 No. Auction Auction No. 53 October 13th, 2019 Melbourne 9 10 12 22 23 26 41 46 53 54 55 58 59 61 presenting our October 2019 Auction No. 53 Sunday 13th October at 10.00 am VIEWING: Saturday 12 noon to 5 pm & Sunday 8 am to 10 am Auctioneer: Harry Glenn HUNGARIAN COMMUNITY CENTRE 760 Boronia Road Wantirna 3152 Melway 63 F-5 Excellent onsite parking facilities available. Café available by Cheryl Savage. Try the Sunday breakfast Contacts: Roland Martyn: 0428 54 33 77 Cheryl Martyn Admin: (61) 03 9848 7951 P.O. Box 1142 Doncaster East Vic 3109 Email: [email protected] www.australianarmsauctions.com 15 % Buyers Premium + GST applies. Plus GST to any lots where indicated 1 L/R = Licence required in the State of Victoria. ALL ESTIMATES IN AUSTRALIAN DOLLARS. 1 JAPANESE TYPE 30 ARISAKA CARBINE: 6.5 Arisaka; 5 shot box mag; 18.2" barrel; f. bore; standard sights, $800 - 900 bayonet stud, sling swivels, Japanese characters & chrysanthemum; vg profiles & clear markings; 85% original military finish remaining to barrel, receiver & fittings; vg stock with minor bruising; all complete including bolt dust cover but screw missing from butt plate; no cleaning rod; gwo & vg cond. #612776 matching bolt L/R 2 JAPANESE TYPE 99 ARISAKA SHORT RIFLE: 7.7 Arisaka; 5 shot box mag; 25.2" barrel; f to g bore; standard $700 - 900 sights, bayonet stud & monopod; Japanese characters to the breech, Imperial crest removed; vg profiles & clear markings; 70% original military finish remains to barrel, receiver & fittings; vg stock with minor bruising; complete with rod, swivels & dust cover to bolt; missing 2 nose cap screws; gwo & cond.
    [Show full text]
  • How to Make 'Condor Tails'
    How to Make ‘Condor Tails’ BY JAMEEL ABRAHAM An ingenious way to combine routers, a band saw and hand tools for big dovetails. know what you’re thinking: “Another opinion on how to cut I dovetails.” I hear you. But this one’s different. I promise. No back and forth over pins or tails first. No Rob Cosman vs. Frank Klausz. Well, actually a little Klausz. When I built my first serious workbench in the 1990s I practically memorized Scott Landis’ “The Work- bench Book” (Taunton) and like many woodworkers I was attracted to Frank Klausz’s beautiful bench, especially the large, crisp dovetails that joined the parts of the tail vise. Klausz told us what tools he used to cut the joints, but didn’t elaborate much on technique. I suppose with a lifetime of skill at your command, you just pick up the tools and the joint emerges. I wanted the crisp look of Klausz’s joints without waiting 20 years to develop the skill. After build- ing several large benches over the past few years, this technique emerged. Best of Both Worlds I’m a big believer in making dovetail Enormous perfection. Cutting large-scale dovetails, such as for this workbench, can be a challenge. joints that fit right off the saw. That’s a This technique makes it straightforward. skill that’s easy to learn with some prac- tice. But not so with the beefy members of a workbench, or large-scale furni- railing just to get the thing vertical so where they excel. This is truly blended ture.
    [Show full text]
  • Basic Box Making
    W ENJOY THIS SELECTION FROM Basic Box Making taunton’s Basic Box Making D o u g S t o w e To purchase Basic Box Making, make your selection now: • ebook version • traditional version BUY NOW! BUY NOW! A Lap-Cornered Box HE BOX SEEN HERE is built with quilted maple sides and a spalted maple Tlift lid. While making this box, you can choose your degree of involve- ment with handtools: The joints can be cut primarily with the table- saw then simply cleaned up with a chisel, or you can go to the other extreme and cut the joints entirely by hand using a Japanese dozuki saw or backsaw. Either technique or a combination thereof can be used to build an attractive box and record your emergence as a true craftsman. I particularly like boxes where the joinery is exposed so that you can tell exactly how the design is held together. With this design, even a quick glance at a distance allows the viewer to say, “I get it. I see how that works.” With this basic design, you can choose from an infinite range of variables to express your own creativity (see “Design Options” on p. 94). 80 A lap-cornered box 1 4 in. 5 1 Cutting the exposed join- 9 ⁄ ⁄2 in. ery on this lap-cornered design is a good way to hone and showcase 5⁄8 in. your handtool skills. The box seen here features quilted maple sides and a spalted maple top. 31⁄2 in. 5 1 1 ⁄2 ⁄2 in.
    [Show full text]
  • 3-Color Display Rohs Electromagnetic Digital Flow Switch Applicable Fluid Water, Water-Soluble Coolant
    3-Color Display RoHS Electromagnetic Digital Flow Switch Applicable fluid Water, Water-soluble coolant Actual size Compact Lightweight The oval fluid 56 mm passage enables the width to be 340 g reduced. (LFE1m3) 40 mm New An insulated type has been added. Positive ground Negative ground 2 types of ground are available. A close proximity setting is available. ¡ Fluctuation of the displayed value can be reduced when the close proximity setting function is used. ¡ Reduced setting time ∗ Not available for the remote type Variations Flow range Integrated display type/Remote type 0.5 L/min 2 L/min 5 L/min 10 L/min 20 L/min 50 L/min 100 L/min 200 L/min LFE1 Rated flow range Display flow range LFE1mZ LFE2 Rated flow range Display flow range LFE2mZ LFE3 Display flow range Rated flow range LFE3mZ LFEm Series CAT.ES100-107D 3-Color Display Electromagnetic Digital Flow Switch LFEm Series New An insulated type has been added. The ground doesn’t need Marking (Blue) to be selected when wiring. Insulated type/LFEmZ Non-insulated type/LFEm The piping port is insulated The piping port is connected to the with the power supply. negative ground of the power supply. PositivePositive ground ground PositivePositive ground ground 2424 V V 2424 V V PipingPiping port port PipingPiping PipingPiping port port PipingPiping InsulationInsulation GroundGround (0 (0V) V) GroundGround (0 (0V) V) ElectricElectric potential potential GroundGround (0 (0V) V) differencedifference GroundGround (−24 (−24 V) V) ShortShort NegativeNegative ground ground NegativeNegative ground ground 2424 V V 2424 V V InsulationInsulation GroundGround (0 (0V) V) GroundGround (0 (0V) V) GroundGround (0 (0V) V) GroundGround (0 (0V) V) Pressure loss: 0.02 MPa or less Reverse flow can be detected.
    [Show full text]
  • Vernier Scale - Wikipedia, the Free Encyclopedia
    Vernier scale - Wikipedia, the free encyclopedia http://en.wikipedia.org/wiki/Vernier Your continued donations keep Wikipedia running! Vernier scale From Wikipedia, the free encyclopedia (Redirected from Vernier) For the spacecraft component, see Vernier thruster. A vernier scale lets one read more precisely from an evenly divided A set of vernier calipers. straight or circular measurement scale. It is fitted with a sliding secondary scale that is used to indicate where the measurement lies when it is in-between two of the marks on the main scale. It was invented in its modern form in 1631 by the French mathematician Augustus Vernier (1580–1637). In some languages, this device is called a nonius, which is the Latin name of the Portuguese astronomer and mathematician Pedro Nunes (1492–1578) who invented the principle. Another theory is that this name is from the Latin "nona" meaning "9" and therefore "nonius" means a "ninth" of the main scale. (Note - Wiki contains an entry for Pierre Vernier, but not Augustus Vernier - also, many sources list his birth and death dates as 1584 and 1638 - There may be an error in the current entry). Verniers are common on sextants used in navigation, scientific instruments and machinists' measuring tools (all sorts, but especially calipers and micrometers) and on theodolites used in surveying. When a measurement is taken by mechanical means using one of the above mentioned instruments, the measure is read off a finely marked data scale (the "fixed" scale, in the diagram). The measure taken will usually be between two of the smallest gradations on this scale.
    [Show full text]