Quick viewing(Text Mode)

Bibliography of Peer-Reviewed Papers Citing Micromeritics Autopore

Bibliography of Peer-Reviewed Papers Citing Micromeritics Autopore

Bibliography of Peer-Reviewed Papers Citing Micromeritics AutoPore

©Micromeritics Instrument Corp. April 2006

Micromeritics Instrument Corp. One Micromeritics Drive Norcross, Georgia, USA Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

No. Title, Publication, Author(s) [through March 2006] MIC Product(s) Cited 1 2-Methylbutanal as a probe and the production of isoprene on stoichiometric and nonstoichiometric B-P-O catalysts Applied , Volume 28, 1986, Pages 161-168 J. AutoPore B. Moffat and A. Schmidtmeyer 2 4-Vinylbenzyl chloride based porous spherical polymer supports derived from water-in-oil- in-water ; Stefanec, D. / Krajnc, P., Reactive and Functional Polymers, Nov 2005 AutoPore 3 A comparative study of the utility of two superdisintegrants in microcrystalline cellulose pellets prepared by...; Souto, C. / Rodriguez, A. / Parajes, S. / Martinez-Pacheco, R., European Journal of Pharmaceutics and Biopharmaceutics, Sept 2005 PoreSizer 4 A high active type of hydroxyapatite for photocatalytic decomposition of dimethyl sulfide under UV irradiation Journal of Molecular Catalysis A: Chemical, Volume 207, Issue 2, AutoPore 16 January 2004, Pages 149-153 Harumitsu Nishikawa 5 A highly efficient Cu/MgO catalyst for vapour phase hydrogenation of furfural to furfuryl alcohol Catalysis Communications, Volume 4, Issue 6, June 2003, Pages 287-293 B. M. AutoPore Nagaraja, V. Siva Kumar, V. Shasikala, A. H. Padmasri, B. Sreedhar, B. David

6 A new method for determination of chloride flux in cement-based materials from chronoamperometry Cement and Concrete Composites, Volume 26, Issue 4, May 2004, AutoPore Pages 339-345 A. At-Mokhtar , O. Amiri , O. Poupard and P. Dumargue 7 A new method to estimate pore volume of porous styrene-divinylbenzene copolymers Polymer Testing, In Press, Corrected Proof, Available online 16 April 2004 Muhammad AutoPore Arif Malik , Munir Ahmed and Muhammad Ikram 8 A new method to produce macropores in calcium phosphate cements Biomaterials, Volume 23, Issue 17, September 2002, Pages 3673-3680 R. P. del Real, J. G. C. Wolke, AutoPore M. Vallet-Reg and J. A. Jansen 9 A novel fluidized bed process to produce fine-grade artificial lightweight aggregates; PoreSizer Kimura, S. / Kimura, K. / Kamiya, H. / Horio, M., Technology, Aug 2004 10 A novel fluidized-bed coating of fine particles by rapid expansion of supercritical fluid solutions Powder Technology, Volume 85, Issue 3, December 1995, Pages 275-278 AutoPore Atsushi Tsutsumi, Shoichi Nakamoto, Tomoko Mineo and Kunio Yoshida 11 A novel method to fabricate bioabsorbable scaffolds Polymer, Volume 36, Issue 4, 1995, AutoPore Pages 837-842 K. Whang, C. H. Thomas, K. E. Healy and G. Nuber 12 A porosity-related diffusion model of weathering-rind development; Oguchi, C.T., AutoPore CATENA, Sep 2004 13 A Simple Method for Estimating Parameters Representing Macroporosity of Porous Styrene– …; MA Malik, SW Ali, S Waseem, Journal of Applied , 2006 AutoPore A simplified equilibrium model for sorption of heavy metal from aqueous solutions 14 AutoPore + ASAP on chitosan Water Research, Volume 36, Issue 12, July 2002, Pages 2999-3008 Ruey- 20** Shin Juang and Huey-Jen Shao 15 A thermogravimetric study of coal decomposition under ignition conditions Thermochimica Acta, Volume 171, 24 November 1990, Pages 193-206 M. A. AutoPore SerageldinHai Wang 16 Activity and reduction behavior of fused iron catalysts containing cobalt for ammonia synthesis: a structure study Applied Catalysis A: General, Volume 122, Issue 1, 2 AutoPore February 1995, Pages 5-20 Wen-Xiang Wang, He-Quan Zhao, Bao-Shi Du, Jian-Ming Wen, 17 Adhesion of an Aqueous Polymeric to Inert Particles in a Spouted Bed; MGAF Vieira, MWF Donida, SCSF Rocha, Drying Technology, 2004 AutoPore 18 mechanism of cationic surfactants onto acid- and heat-activated sepiolites Water Research, Volume 36, Issue 16, September 2002, Pages 3957-3964 E. Sabah, M. AutoPore Turan and M. S. elik

Mercury Porosimeter References, Page 654 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

19 Adsorption of atrazine from aqueous solution on heat treated kerolites Chemosphere, Volume 51, Issue 2, April 2003, Pages 85-93 E. Gonzlez-Pradas, M. Socas-Viciana, M. AutoPore + Gemini Saifi, M. D. Urea-Amate, F. Flores-Cspedes, M. Fernndez-Prez and M. Villafranca-Snc

20 Adsorption of Basic Yellow 28 from aqueous solutions with clinoptilolite and amberlite; Yener, J. / Kopac, T. / Dogu, G. / Dogu, T., Journal of And Interface Science, Feb 2006 PoreSizer 21 Adsorption of sulfur dioxide on coal reject-derived chars Separations Technology, AutoPore Volume 2, Issue 1, January 1992, Pages 19-28 G. Q. Lu and D. D. Do 22 An oral controlled release matrix pellet containing nanocrystalline ketoprofen International Journal of Pharmaceutics, Volume 219, Issues 1-2, 21 May 2001, Pages 81- AutoPore 87 G. J. Vergote, C. Vervaet, I. Van Driessche, S. Hoste, S. De Smedt, J.

23 Analysis and Prediction of Oil Recovery Efficiency in Limestone Cores Using Artificial Neural Networks ; Fathi H. Boukadi and Saleh M. Al-Alawi* , Energy & Fuels (1997), 11, 1056-1060 AutoPore 24 Analysis of glass fiber reinforced cement composites and their thermal and hygric material …; JJ Podebradská, RJ Cerný, JJ Drchalová, PJ …, Journal of Thermal Analysis and , 2004 PoreSizer Analytical study of salt migration and efflorescence in a mediaeval cathedral Analytica 25 SediGraph + Chimica Acta, Volume 283, Issue 2, 26 November 1993, Pages 855-867 L. Backbier and AutoPore J. RousseauJ. C. J. Bart 26 Anisotropic permeability and bimodal pore-size distributions of fine-grained marine sediments Marine and Petroleum , Volume 17, Issue 6, 1 June 2000, Pages 657- AutoPore 672 Alistair J. Bolton, Alex J. Maltman and Quentin Fisher 27 Anterior cruciate ligament regeneration using braided biodegradable scaffolds: in vitro optimization …; HH Lu, JA Cooper, S Manuel, JW Freeman, MA Attawia …, Biomaterials, 2005 AutoPore 28 Apparent versus true density for the volume-to-weight transformation in coal blends; D ALVAREZ, AG BORREGO, Journal of Microscopy, 2005 AccuPyc + AutoPore 29 Application of Artificial Neural Network for Estimating Tight Gas Sand Intrinsic Permeability ; Smaoui: ::Ali A. Garrouch* / Nejib Smaoui , Energy & Fuels (1996), 10, 1053-1059 PoreSizer 30 Application of the acoustic emission technique to characterise liquid transfer in a porous ceramic during drying; Chotard, T. / Quet, A. / Ersen, A. / Smith, A., Journal of the European Ceramic Society, Jan 2006 AutoPore 31 Assessment of Electroosmotic Perfusion in Capillary Chromatographic Columns Using Electrical …; PT Vallano, VT Remcho, J. Phys. Chem. B, 2001 AutoPore 32 Assessment of the Wettability of Porous Electrodes for Lithium- Batteries; MSN Wu, TLN Liao, YYN Wang, CCN Wan, Journal of Applied , 2004 AutoPore 33 Axial dispersion in single pellet-string columns packed with unusually shaped porous AccuPyc + AutoPore pellets; Solcova, O. / Soukup, K. / Schneider, P., Journal, Jun 2005 + ASAP 34 Bioactivity and mechanical properties of poly (dimethylsiloxane)-modified calcia-silica hybrids with …; Q Chen, N Miyata, T Kokubo, T Nakamura, Journal of the American Ceramic Society, 2003 PoreSizer 35 Bioactivity and mechanical properties of SiO 2–CaO–P 2 O 5 glass-ceramics; M Vallet- Regí, J Román, S Padilla, JC Doadrio, …, Journal of Materials , 2005 AutoPore 36 Biocatalytic synthesis of highly ordered degradable dextran-based hydrogels; Ferreira, L. / Gil, M.H. / Cabrita, A.M.S. / Dordick, J.S., Biomaterials, Aug 2005 PoreSizer 37 Biphasic materials for bone grafting and hyperthermia treatment of cancer; D Arcos, RP del Real, M Vallet-Regi, Journal of Biomedical Materials Research, 2003 AutoPore 38 Bricks in historical buildings of Toledo City: characterisatio n and restoration Materials Characterization, Volume 50, Issue 1, January 2003, Pages 59-68 Paula Lpez-Arce, Javier AutoPore Garcia-Guinea, Mercedes Gracia and Joaqun Obis

Mercury Porosimeter References, Page 655 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

39 Bulk and surface modification of cellulose diacetate based RO/NF membranes by polymethylhydrosiloxane preparation and characterization Desalination, Volume 146, AutoPore Issues 1-3, 10 September 2002, Pages 325-330 Ezdine Ferjani, Ramzi Hadj Lajimi, Andr Derata 40 Carbon foams from coals. A preliminary study; Calvo, M. / Garcia, R. / Arenillas, A. / Suarez, I. / Moinelo, S.R., Fuel, Dec 2005 AutoPore + AccuPyc 41 Carbon membranes for gas separation: Developmental studies Gas Separation & Purification, Volume 8, Issue 3, 1994, Pages 137-147 A. S. Damle, S. K. Gangwal and V. AutoPore K. Venkataraman 42 Cassava bagasse-Kraft paper composites: analysis of influence of impregnation with starch acetate on tensile strength...; Matsui, K.N. / Larotonda, F.D.S. / Paes, S.S. / Luiz, D.B. / PoreSizer Pires, A.T.N. / Laurindo, J.B., Carbohydrate Polymers, Feb 2004 43 Catalytic activity of aluminium-rich hematite in the water gas shift reaction; JMT de Souza, M do Carmo Rangel, Reaction Kinetics and Catalysis Letters, 2004 AutoPore 44 Catalytic cracking of heavy vacuum gas oil over aluminum diacetate containing catalyst Applied Catalysis A: General, Volume 110, Issue 1, 17 March 1994, Pages 87-98 Jos AutoPore Carlos D. Macedo and Maria Alice I. Duarte 45 Catalytic decomposition of biomass tars: use of dolomite and untreated olivine; Devi, L. / Ptasinski, K.J. / Janssen, F.J.J.G. / van Paasen, S.V.B. / Bergman, P.C.A. / Kiel, J.H.A., Renewable Energy, Apr 2005 AutoPore 46 Catalytic Hydrogenation of Aqueous Nitrate Solutions in Fixed-Bed Reactors ; Albin Pintar, Jurka Batista , Catalysis Today 53 (1999) 35-50 PoreSizer 47 Centrifugal casting of alumina tube for membrane application Journal of Membrane Science, Volume 199, Issues 1-2, 30 April 2002, Pages 69-74 Kyung-Hee Kim, Seong-Jai AutoPore Cho, Kyung-Jin Yoon, Jong-Jip Kim, Jowoong Ha and Dong-II Chun 48 Ceramic TiO2-foams: characterisation of a potential scaffold; Haugen, H. / Will, J. / Kohler, A. / Hopfner, U. / Aigner, J. / Wintermantel, E., Journal of the European Ceramic AutoPore Society, Apr 2004 49 Cerium (IV) oxide synthesis and sinterable prepared by the polymeric organic complex solution method Journal of the European Ceramic Society, Volume 22, Issues 9- AutoPore 10, September 2002, Pages 1711-1721 Pedro Durn, Francisco Capel, Dionisio Gutierr

50 Characterisation of porous solids using integrated nitrogen sorption and mercury porosimetry Chemical Engineering Science, Volume 59, Issue 1, January 2004, Pages 41- AutoPore 51 Sean P. Rigby, Robin S. Fletcher and Sandra N. Riley 51 Characteristics of porous BaTiO3-based PTC thermistors fabricated by adding graphite powders and Engineering B, Volume 107, Issue 1, 25 February 2004, AutoPore Pages 19-26 K. Park 52 Characterization and performances of an Algerian diatomite-based gas support; Hadjadj-Aoul, O. / Belabbes, R. / Belkadi, M. / Guermouche, M.H., Applied , Feb 2005 AutoPore 53 Characterization of activated Cu/Mg/Al hydrotalcites and their catalytic activity in toluene combustion Applied Clay Science, Volume 18, Issues 1-2, January 2001, Pages 71-80 AutoPore Frantisek Kovanda, Kveta Jirtov, Jan Rymes and David Kolousek 54 Characterization of adsorbent composite blocks for methane storage Carbon, Volume 39, Issue 11, September 2001, Pages 1653-1662 S. Biloe, V. Goetz and S. Mauran AutoPore

55 Characterization of mercury- and zinc-doped alkali-activated slag matrix: Part I. Mercury Cement and Concrete Research, Volume 33, Issue 8, August 2003, Pages 1251-1256 AutoPore Guangren Qian, Darren Delai Sun and Joo Hwa Tay 56 Characterization of mercury- and zinc-doped alkali-activated slag matrix: Part II. Zinc Cement and Concrete Research, Volume 33, Issue 8, August 2003, Pages 1257-1262 AutoPore Guangren Qian, Darren Delai Sun and Joo Hwa Tay

Mercury Porosimeter References, Page 656 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

57 Characterization of model automotive exhaust catalysts: Pd on ceria and ceria-zirconia supports Catalysis Today, Volume 50, Issue 2, 29 April 1999, Pages 309-328 H. -W. Jen, AutoPore + Gemini G. W. Graham, W. Chun, R. W. McCabe, J. -P. Cuif, S. E. Deutsch and O. Touret

Characterization of submicron alumina dispersions with poly(methacrylic acid) 58 AutoPore + polyelectrolyte Journal of the European Ceramic Society, Volume 15, Issue 2, 1995, FlowSorb Pages 155-164 Wen-Cheng J. Wei, Su Jen Lu and Bu-Kon Yu 59 CHARACTERIZATION OF THE POROUS STRUCTURE OF CHILEAN VOLCANIC SOILS BY NITROGEN ADSORPTION AND …; M ANTILÉN, JE FÖRSTER, S DEL CONFETTO, E RODIER, …, J. Chil. Chem. Soc, 2004 AutoPore 60 Chemical vapor infiltration of pyrocarbon --II. The influence of increasing methane partial pressure at constant total pressure on infiltration rate and degree of pore filling Carbon, AutoPore Volume 36, Issues 7-8, 1998, Pages 1033-1042 W. Benzinger and K. J. 61 Chromatographic determination of effective diffusivities of Raschig ring-shaped catalyst: Radial anisotropy of pellets Applied Catalysis, Volume 66, Issue 1, 1990, Pages 167-179 AutoPore Helena Davidov and Petr Schneider* 62 Cinza da lenha para aplicação em cerâmica vermelha Parte I: características da cinza (Firewood …; MC Borlini, HF Sales, CMF Vieira, RA Conte, DG …, Cerâmica, 2005 PoreSizer 63 Coagulation/phase in the silica/inorganic salt systems (1)—observation of state …; KV Imaizumi, NV Matsuda, MV Otsuka, Journal of Materials Science, 2003 PoreSizer 64 Coal properties and their influence on air activation Carbon, Volume 35, Issue 12, 1997, Pages 1765-1779 O. C. Kopp, E. L. Fuller, Jr , C. R. Sparks, M. R. Rogers and M. L. AutoPore McKinney 65 Coking kinetics of fresh and thermally aged commercial Cr2O3/Al2O3 catalyst Applied Catalysis A: General, Volume 101, Issue 2, 2 August 1993, Pages 185-198 J. A. Pea, A. AutoPore Monzn and J. SantamaraJ. L. G. Fierro 66 Cold extrusion as a continuous single-step granulation and tabletting process European Journal of Pharmaceutics and Biopharmaceutics, Volume 52, Issue 3, November 2001, AutoPore Pages 359-368 E. I. Keleb, A. Vermeire, C. Vervaet and J. P. Remon 67 Collagen hybridization with poly(-lactic acid) braid promotes ligament cell migration Materials Science and Engineering: C, Volume 17, Issues 1-2, 1 November 2001, Pages AutoPore 95-99 Akiko Ide, Masataka Sakane, Guopin Chen, Hitoshi Shimojo, Takashi Ushida,

68 Compaction and measurement of tablets in liquids with different dielectric constants for determination of bonding mechanisms--Evaluation of the concept International Journal of Accupyc + AutoPore Pharmaceutics, Volume 143, Issue 2, 8 November 1996, Pages 233-245 Helena

69 Comparison of catalytic activity of aluminum oxide and silica gel for decomposition of volatile …; MA Malik, Y Minamitani, KH Schoenbach, Plasma Science, IEEE Transactions on, 2005 AutoPore 70 Comparison of iron-, nickel-, copper- and manganese-based oxygen carriers for chemical- looping combustion Fuel, Volume 83, Issue 9, June 2004, Pages 1215-1225 Paul Cho , AutoPore + Gemini Tobias Mattisson and Anders Lyngfelt 71 Comparison of the effect of pore architecture and bead size on the extent of plasmachemical amine functionalisation of poly(styrene-co-divinylbenzene) permanently AutoPore + TriStar porous resins Polymer, Volume 45, Issue 7, 1 March 2004, Pages 2185-2192 Jas Pal Badyal, 72 Computer-aided design of catalytic monoliths for automobile emission control Chemical Engineering Science, Volume 43, Issue 8, 1988, Pages 2087-2094 C. J. Pereira, J. E. AutoPore Kubsh and L. L. Hegedus 73 Continuous release of rh-interferon a-2a from triglyceride matrices; Mohl, S. / Winter, G., AutoPore Journal of Controlled Release, May 2004

Mercury Porosimeter References, Page 657 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

74 Continuous twin screw extrusion for the wet granulation of lactose International Journal of Pharmaceutics, Volume 239, Issues 1-2, 4 June 2002, Pages 69-80 E. I. Keleb, A. AutoPore Vermeire, C. Vervaet and J. P. Remon 75 Control of pore formation in macroporous polymers synthesized by single-step ?-radiation- initiated polymerization and...; Safrany, A. / Beiler, B. / Laszlo, K. / Svec, F., Polymer, Apr 2005 AutoPore 76 Control of the porous structure of amorphous silica--alumina : 4. Nitrogen bases as pore- regulating agents Applied Catalysis, Volume 33, Issue 2, 1987, Pages 281-294 Ruud Snel AutoPore

77 Control of the Porous Structure of Amorphous Silica--Alumina : V. The Effect of AutoPore Compaction Applied Catalysis, Volume 36, 1988, Pages 249-258 R. Snel 78 Cooperation of solid granule and solvent as porogenic agents Novel porogenic mode of biporous media for protein chromatography Journal of Chromatography A, Volume 922, AutoPore Issues 1-2, 13 July 2001, Pages 77-86 Minlian Zhang and Yan Sun 79 Copper uptake by inorganic particles -- equilibrium, kinetics, and particle interactions: experimental and Surfaces A: Physicochemical and Engineering Aspects, AutoPore Volume 177, Issues 2-3, 28 February 2000, Pages 133-146 Kavitha Subramaniam, Sotir

80 Corrosion behaviour of HVOF sprayed SUS316L stainless steel in seawater Corrosion Science, Volume 44, Issue 11, November 2002, Pages 2561-2581 Jin Kawakita, Takeshi AutoPore Fukushima, Seiji Kuroda and Toshiaki Kodama 81 Corrosion resistance of HVOF sprayed HastelloyC nickel base alloy in seawater Corrosion Science, Volume 45, Issue 12, December 2003, Pages 2819-2835 Jin Kawakita, AutoPore Seiji Kuroda, Takeshi Fukushima and Toshiaki Kodama 82 Cost-effective fabrication of porous a-SiAlON bonded ß-SiAlON ceramics; Xu, X. / Fu, R. / Chen, K. / Ferreira, J.M.F., Materials Letters, Aug 2005 PoreSizer 83 Deactivation of ruthenium catalysts in continuous glucose hydrogenation Applied Catalysis A: General, Volume 87, Issue 2, 19 August 1992, Pages 219-229 Blaise J. AutoPore Arena 84 Deep oxidation of hydrocarbons Applied Catalysis A: General, Volume 81, Issue 2, 13 AutoPore February 1992, Pages 239-255 S. K. Agarwal and J. J. SpiveyJ. B. Butt 85 Dehydrogenation of isopropylic alcohol on a Cu/SiO2 catalyst: a study of the activity evolution and reactivation of the catalyst Applied Catalysis A: General, Volume 142, Issue AutoPore 2, 15 August 1996, Pages 375-386 A. J. Marchi, J. L. G. Fierro, J. Santama

86 Dependence of pore diffusivity of protein on adsorption density in anion-exchange adsorbent Biochemical Engineering Journal, Volume 14, Issue 1, April 2003, Pages 45-50 AutoPore Wei-Dong Chen, Xiao-Yan Dong, Shu Bai and Yan Sun Deposition and Characteristics of Coke Over A H-ZSM5 Zeolite-Based Catalyst in the Mtg 87 AutoPore + ASAP Process ; Benito: Pedro L. Benito,* Ana G. Gayubo, AndreS T. Aguayo, MartiN Olazar, 20** and Javier Bilbao , Ind. Eng. Chem. Res. (1996), 35, 3991-399 88 Design and evaluation of a coupled monolithic preconcentrator-capillary zone electrophoresis system for the extraction...; Armenta, J.M. / Gu, B. / Humble, P.H. / Thulin, C.D. / Lee, M.L., Journal of Chromatography A, Dec 2005 AutoPore 89 Design of a novel system allowing the selection of an adequate binder for Solidification/Stabilization of wastes Cement and Concrete Research, Volume 27, Issue AutoPore 10, October 1997, Pages 1533-1542 J. Pera, G. Thevenin and M. Chabannet 90 Determination of adsorptive properties of clay/water system: methylene blue sorption Journal of Colloid and Interface Science, Volume 269, Issue 2, 15 January 2004, Pages AutoPore + 310-314 A. Grses, S. Karaca, . Dogar, R. Bayrak, M. Aikyildiz and M. Yalin FlowSorb

Determination of the cause of mercury entrapment during porosimetry experiments on sol- 91 AutoPore + ASAP gel silica catalyst supports Applied Catalysis A: General, Volume 247, Issue 1, 10 July 20** 2003, Pages 27-39 Sean P. Rigby, Robin S. Fletcher and Sandra N. Riley

Mercury Porosimeter References, Page 658 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

92 Deuterium absorption and material phase characteristics of Zr2Fe Journal of Alloys and Compounds, Volume 206, Issue 1, April 1994, Pages 83-93 A. NobileW. C. Mosley, J. S. AutoPore Holder and K. N. Brooks 93 Development of compressive strength and porosity of some regulated set cements (RSCS) both made from rotary kiln - and laboratory oven clinker - hydrated at 20C and 5C AutoPore Cement and Concrete Research, Volume 23, Issue 3, May 1993, Pages 700-710 R. G. Jge

94 Development of dense corrosion resistant coatings by an improved HVOF spraying process Science and Technology of Advanced Materials, Volume 4, Issue 4, 1 July 2003, AutoPore Pages 281-289 Jin Kawakita, Seiji Kuroda, Takeshi Fukushima and Toshiaki Kodama

95 Development of porous ceramics with well-controlled porosities and pore sizes from apatite fibers …; MF Kawata, HF Uchida, KF Itatani, IF Okada, SF …, Journal of Materials Science: Materials in Medicine, 2004 PoreSizer 96 Development of zirconia-titania porous ceramics for humidity sensors Sensors and Actuators B: Chemical, Volume 96, Issue 3, 1 December 2003, Pages 677-683 I. C. AutoPore Cosentino, E. N. S. Muccillo and R. Muccillo 97 Diffusion and adsorption in zeolite Y and mordenite deactivated by propene oligomerization and hexane cracking The Chemical Engineering Journal and the AutoPore Biochemical Engineering Journal, Volume 54, Issue 3, July 1994, Pages 115-123 K. P. Mller, M. Kojim 98 Diffusion of large in porous glass Chemical Engineering Science, Volume 49, AutoPore Issue 16, August 1994, Pages 2575-2584 Vladimr Hejtmnek and Petr Schneider 99 Direct recoil radon emanation from crystalline phases. Influence of moisture content; Barillon, R. / Ozgumus, A. / Chambaudet, A., Geochimica et Cosmochimica Acta, Jun 2005 PoreSizer 100 release from reservoir pellets compacted with some excipients of different physical properties European Journal of Pharmaceutical Sciences, Volume 20, Issues 4-5, Accupyc + AutoPore December 2003, Pages 469-479 sa Tunn, Elisabet Brjesson, Gran Frenning and Gran Ald

101 Drying behaviour of two sets of microcrystalline cellulose pellets International Journal of Pharmaceutics, Volume 219, Issues 1-2, 21 May 2001, Pages 113-126 Jonas Berggren Accupyc + AutoPore and Gran Alderborn 102 Durability Improvement of Ancient Bricks by Cementation of Porous Media; P LOPEZ- ARCE, D BENAVENTE, J GARCIA-GUINEA, Journal of the American Ceramic Society, 2005 AutoPore 103 Durability of bricks used in the conservation of historic buildings -- influence of composition and microstructure Journal of Cultural Heritage, Volume 4, Issue 2, April AutoPore 2003, Pages 91-99 Kerstin Elert, Giuseppe Cultrone, Carlos Rodriguez Navarro and E 104 Dynamics of gas transport in porous solids: the influence of non-isobaric transport and concentration Catalysis Today, Volume 20, Issue 3, 19 August 1994, Pages 381-393 AutoPore Daniel Arnost and Petr Schneider 105 Dynamics of pressure build-up accompanying multicomponent gas transport in porous solids: adsorbable gases Chemical Engineering Journal, Volume 74, Issue 3, 19 July 1999, AutoPore Pages 171-179 Vladimr Hejtmnek, Pavel Capek, Olga Solcov and Petr Schneider

106 Easy and flexible preparation of nanocasted carbon monoliths exhibiting a multimodal hierarchical porosity Microporous and Mesoporous Materials, Volume 72, Issues 1-3, 8 AutoPore July 2004, Pages 59-65 An-Hui Lu, Jan-Henrik Smtt, Stefan Backlund and Mika Lindn

107 Ectopic bone formation by microporous calcium phosphate ceramic particles in sheep muscles; Le Nihouannen, D. / Daculsi, G. / Saffarzadeh, A. / Gauthier, O. / Delplace, S. / Pilet, P. / Layrolle, P., Bone, Jun 2005 AutoPore

Mercury Porosimeter References, Page 659 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

108 Effect of an organic additive on the rheology of an aluminous cement paste and consequences on the …; Y El Hafiane, A Smith, JP Bonnet, B Tanouti, J. Phys. IV France, 2005 AutoPore 109 Effect of basicity and pore size distribution of transition aluminas on their performance in the hydrogen sulphide-sulphur dioxide reaction Applied Catalysis, Volume 75, Issue 1, AutoPore 1991, Pages 57-73 J. L. Zotin and A. C. Faro, Jr. 110 Effect of calcination and water extraction on the distribution of the active components in the oxide form of phosphorus--nickel--molybdenum/alumina catalysts for AutoPore hydrodesulfurization Applied Catalysis, Volume 65, Issue 1, 1990, Pages 53-68 P. Atanasov 111 Effect of composition and pore structure on binding energy and effective diffusivity of moisture in porous food Journal of Food Engineering, Volume 15, Issue 3, 1992, Pages AutoPore 187-208 Xiaobing Xiong, Ganesan Narsimhan and Martin R. Okos 112 Effect of crystallinity of anatase on photoactivity for methyleneblue decomposition in water; Toyoda, M. / Nanbu, Y. / Nakazawa, Y. / Hirano, M. / Inagaki, M., Applied AutoPore Catalysis B: Environmental, Jun 2004 113 Effect of diffusion on resid hydrodesulfurization activity Chemical Engineering Science, Volume 45, Issue 8, 1990, Pages 2625-2631 Pei-Shing Eugene Dai, David E. Sherwood AutoPore and Bobby R. Martin 114 Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between oven-, vacuum-, and freeze-drying AutoPore Cement and Concrete Research, Volume 31, Issue 10, October 2001, Pages 1467-1477 C

115 Effect of drying rate on porosity and tabletting behaviour of cellulose pellets International Journal of Pharmaceutics, Volume 227, Issues 1-2, 4 October 2001, Pages 81-96 Jonas Accupyc + AutoPore Berggren and Gran Alderborn 116 Effect of filler phase porosity on directed oxidation of Al alloy Journal of Alloys and Compounds, Volume 205, Issues 1-2, March 1994, Pages 275-279 D. D. Upadhyaya, R. AutoPore Bhat, S. Ramanathan and S. K. Roy 117 Effect of gas-phase transport in molten carbonate fuel cell Journal of Electroanalytical Chemistry, Volume 540, 2 January 2003, Pages 169-188 Choong-Gon Lee, Byoung-Sam AutoPore Kang, Hai-Kyung Seo and Hee-Chun Lim 118 Effect of heat treatment of alumina granules on the compaction behavior and properties of green and sintered bodies Journal of the European Ceramic Society, Volume 22, Issue 16, AutoPore December 2002, Pages 2841-2848 Nobuhiro Shinohara, Shigemi Katori, Masata

119 Effect of intragranular porosity on compression behaviour of and drug release from reservoir pellets European Journal of Pharmaceutical Sciences, Volume 19, Issue 5, Accupyc + AutoPore August 2003, Pages 333-344 sa Tunn, Johan Grsj and Gran Alderborn 120 Effect of matrix composition and process conditions on casein-gelatin beads floating properties International Journal of Pharmaceutics, Volume 198, Issue 2, 5 April 2000, AutoPore Pages 157-165 E. Bulgarelli, F. Forni and M. T. Bernabei 121 Effect of Microcrystalline Cellulose Grade and Process Variables on Pellets Prepared by Extrusion– …; LG Alvarez, AG Concheiro, JLG Gómez-Amoza, CG …, Drug Development and Industrial , 2002 AutoPore 122 Effect of NiO addition on the sintering and grain growth behaviour of BaTiO3 Ceramics International, Volume 25, Issue 1, January 1999, Pages 69-75 W. H. Tzing and W. H. AutoPore Tuan 123 Effect of and porosity on particle film coatings Powder Technology, Volume AutoPore 65, Issues 1-3, March 1991, Pages 441-445 W. J. Iley 124 Effect of pore diffusion on reactivity of lump coke Fuel, Volume 66, Issue 9, September AutoPore 1987, Pages 1281-1288 Pavel Fott and Pavel Straka 125 Effect of pore size distribution on drying shrinking of alkali-activated slag concrete Cement and Concrete Research, Volume 30, Issue 9, September 2000, Pages 1401-1406 AutoPore Frank Collins and J. G. Sanjayan

Mercury Porosimeter References, Page 660 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

126 Effect of porosity and surface chemistry on the characterization of synthetic polymers by HPLC using …; M Janc, S Xie, DS Peterson, RW Allington, F Svec, …, Journal of Separation Science, 2002 AutoPore 127 Effect of porosity on sulfonation of macroporous styrene-divinylbenzene beads European Polymer Journal, Volume 40, Issue 8, August 2004, Pages 1609-1613 Munir Ahmed, AutoPore Muhammad Arif Malik, Shahid Pervez and Muhammad Raffiq 128 Effect of process parameters on compressibility of granulation manufactured in a high- shear mixer International Journal of Pharmaceutics, Volume 198, Issue 1, 30 March 2000, AutoPore Pages 51-61 Sherif I. Farag Badawy, Mark M. Menning, Mary Ann Gorko and Donna

129 Effect of support properties on the catalytic activity of HDS catalysts Applied Catalysis, AutoPore Volume 27, Issue 1, 1986, Pages 21-29 Kveta Jirtov and Milan Kraus 130 Effect of the crosslinking agent on porous networks formation of hema-based copolymers; AutoPore Gomez, C.G. / Alvarez Igarzabal, C.I. / Strumia, M.C., Polymer, Aug 2004 131 Effect of the preparation method on the pore size distribution of activated carbon from coconut shell Carbon, Volume 30, Issue 4, 1992, Pages 601-604 Jorge LaineSimon AutoPore Yunes 132 Effect of uniaxially pressing ordinary portland cement pastes containing metal hydroxides on porosity, density, and leaching Cement and Concrete Research, Volume 28, Issue 11, AutoPore November 1998, Pages 1639-1653 C. R. Cheeseman, S. Asavapisit and J. Knight

133 Effective diffusivity changes during calcination, carbonation, recalcination, and sulfation of limestones Chemical Engineering Science, Volume 49, Issue 8, April 1994, Pages AutoPore 1195-1208 S. V. Krishnan and Stratis V. Sotirchos 134 Effects of Al2O3 addition on the phases, flow characteristics and morphology of the porous kaolin ceramics Materials Science and Engineering A, Volume 373, Issues 1-2, 25 AutoPore May 2004, Pages 221-228 Yung-Feng Chen, Yu-Hsein Chang, Moo-Chin Wang and Min- Hs 135 Effects of alumina preparation solvents on the thermostability and oxidation activity of alumina-supported palladium and platinum catalysts Applied Catalysis B: Environmental, AutoPore Volume 4, Issues 2-3, 13 September 1994, Pages 187-198 K. Masuda, T. Sano,

136 Effects of ionic strength and temperature on adsorption of atrazine by a heat treated kerolite; Urena-Amate, M.D. / Socias-Viciana, M. / Gonzalez-Pradas, E. / Saifi, M., Chemosphere, Mar 2005 AutoPore 137 Effects of mixing sequence on alumina prepared by injection molding Journal of the European Ceramic Society, Volume 18, Issue 10, 1998, Pages 1445-1451 Wen-Cheng J. AutoPore Wei, Sha-Jong Tsai and Kung-Chung Hsu 138 Effects of pore structure on the performance of coal gas desulfurization sorbents Chemical Engineering Science, Volume 48, Issue 11, 1993, Pages 1971-1984 Evangelos AutoPore A. Efthimiadis and Stratis V. Sotirchos 139 Effects of temperature, reaction time and reducing agent content on the synthesis of macroporous foam glasses from waste...; Mear, F. / Yot, P. / Ribes, M., Materials Letters, Apr 2006 AutoPore 140 Elastic modulus of porous Ce-TZP ceramics Materials Letters, Volume 58, Issues 1-2, AutoPore January 2004, Pages 172-175 L. F. C. P. Lima, A. L. E. Godoy and E. N. S. Muccillo 141 Electrical properties of chemically bonded ceramics based on calcium aluminate Advanced Cement Based Materials, Volume 1, Issue 1, October 1993, Pages 47-50 Brian AutoPore P. Borglum and J. Francis YoungRelva C. Buchanan 142 Electrochemical modelling of chlorides migration in cement based materials. Part II: Experimental study--calculation of chlorides flux Electrochimica Acta, Volume 46, Issue AutoPore 23, 10 August 2001, Pages 3589-3597 O. Amiri, A. At-Mokhtar, P. Dumargue and G.

Mercury Porosimeter References, Page 661 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

143 Electrospinning of silk fibroin nanofibers and its effect on the adhesion and spreading of normal human keratinocytes and fibroblasts in vitro Biomaterials, Volume 25, Issues 7-8, AutoPore March-April 2004, Pages 1289-1297 Byung-Moo Min, Gene Lee, So Hyun Kim,

144 TEMPLATING USING SUPERCRITICAL FLUID EMULSIONS; R Butler, CM Davies, I Hopkinson, AI Cooper, Polymer Preprints, 2002 AutoPore 145 Environmental and diagenetic records from a new reference section for the Boreal realm: The Campanian chalk of the Mons...; Richard, J. / Sizun, J.P. / Machhour, L., Sedimentary Geology, Jul 2005 PoreSizer 146 Esterification of phthalic anhydride with 2-ethylhexanol by solid superacidic catalysts Applied Catalysis A: General, Volume 90, Issue 2, 1 November 1992, Pages 73-96 T. S. AutoPore Thorat, V. M. Yadav and G. D. Yadav 147 Estimating particle size distributions from a network model of porous media Powder Technology, Volume 104, Issue 2, 1 September 1999, Pages 169-179 Toby Mathews, G. AutoPore Peter Matthews and Stephen Huggett 148 Evaluation of apparent viscosity of liquid-containing porous particles by the intrusion method using a conical rotor Powder Technology, Volume 131, Issue 1, 3 March 2003, Accupyc + AutoPore Pages 40-47 Tomohiro Iwasaki, Munetake Satoh, Masakazu Okui, Makiko Kobayashi, To

149 Evaluation of porous ceramic membranes as O2 distributors for the partial oxidation of in inert membrane reactors Separation and Purification Technology, Volume 25, AutoPore + ASAP Issues 1-3, 1 October 2001, Pages 137-149 David Farrusseng, Anne Julbe and Chr 20**

150 Evaluation of porous networks of poly(2-hydroxyethyl methacrylate) as interfacial drug delivery devices Biomaterials, Volume 22, Issue 21, November 2001, Pages 2893-2899 AutoPore T. D. Dziubla, M. C. Torjman, J. I. Joseph, M. Murphy-Tatum and A. M. Lowman

151 Evaluation of rapidly disintegrating tablets manufactured by phase transition of sugar alcohols; Kuno, Y. / Kojima, M. / Ando, S. / Nakagami, H., Journal of Controlled Release, Jun 2005 PoreSizer 152 Evaluation of selected methods for the characteristics of ceramic membranes Journal of Membrane Science, Volume 89, Issues 1-2, 30 March 1994, Pages 119-129 J. Rocek and AutoPore P. Uchytil 153 Evaluation of strength-enhancing factors of a ductile binder in direct compression of sodium bicarbonate and calcium carbonate powders European Journal of Pharmaceutical Accupyc + AutoPore Sciences, Volume 10, Issue 1, March 2000, Pages 53-66 Sofia Mattsson and Christer

154 Evaluation of substrate-binder interaction in a model granule system International Journal of Pharmaceutics, Volume 169, Issue 2, 15 July 1998, Pages 175-182 F. Kiekens, R. AutoPore Zelko, I. Antal and J. P. Remon 155 Evaluations of blood compatibility via protein adsorption treatment of the vascular scaffold …; YJ Choi, SK Choung, CM Hong, IS Shin, SN Park, SH …, Journal of biomedical materials research. Part A, 2005 PoreSizer 156 Evolution of fluid pathways of charroux-civary tonalite (part I): Alteration effects--an analytical approach Physics and Chemistry of the Earth, Part A: Solid Earth and Geodesy, AutoPore Volume 24, Issue 7, 1999, Pages 601-606 S. Sammartino, P. Partier, P. Sar 157 Extraction of binders from green ceramic bodies by supercritical fluid: influence of the porosity Journal of the European Ceramic Society, Volume 22, Issues 9-10, September AutoPore 2002, Pages 1403-1409 Thierry Chartier, Fleur Bordet, Eric Delhomme and Jean F

158 Fabrication and characterization of metal porous membrane made of Ni powder for hydrogen separation; Ryi, S.K. / Park, J.S. / Choi, S.H. / Cho, S.H. / Kim, S.H., Separation and Purification Technology, Jan 2006 AutoPore

Mercury Porosimeter References, Page 662 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

159 Fabrication of a dense La0.2Sr0.8CoO3-[delta]/CoO composite membrane by utilizing the electroless cobalt plating technique Journal of Membrane Science, Volume 198, Issue 1, AutoPore 31 March 2002, Pages 95-108 Liang Hong and Weishing Chua 160 Fabrication of bimodal porous alumina ceramics Materials Research Bulletin, Volume 38, Issue 2, 25 January 2003, Pages 373-379 Yong Sheng Han, Jian Bao Li and Yong Jun AutoPore Chen 161 Fabrication of dense BaMgAl10O17:Eu2+ phosphor particles by spray pyrolysis; Jung, H.-K. / Lee, D.-W. / Jung, K.Y. / Boo, J.-H., Journal of Alloys and Compounds, Mar 2005 AutoPore 162 Fabrication of functionally graded reaction infiltrated SiC-Si composite by three- dimensional printing (3DP(TM)) process Materials Science and Engineering A, Volume AutoPore 298, Issues 1-2, 31 January 2001, Pages 110-119 Jooho Moon, Amador C. Caballero, Lesze 163 Fabrication of hydroxyapatite bodies by uniaxial pressing from a precipitated powder Biomaterials, Volume 22, Issue 6, 15 March 2001, Pages 583-588 L. M. Rodrguez- AutoPore Lorenzo, M. Vallet-Reg and J. M. F. Ferreira 164 Fabrication of low temperature macroporous hydroxyapatite scaffolds by foaming and hydrolysis of an [alpha]-TCP paste Biomaterials, Volume 25, Issue 17, August 2004, AutoPore Pages 3671-3680 A. Almirall , G. Larrecq , J. A. Delgado , S. Martnez , J. A. Planell

165 Fabrication of microporous ceramics from ceramic powders of quartz-natural zeolite mixtures Ceramics International, Volume 29, Issue 8, 2003, Pages 927-931 O. San, S. AutoPore Abali and Hosten 166 Fabrication of reaction-bonded Cr2O3 ceramics Journal of the European Ceramic Society, Volume 19, Issue 8, June 1999, Pages 1651-1664 T. Li, R. J. Brook and B. Derby AutoPore

167 Fiber-based tissue-engineered scaffold for ligament replacement: design considerations and in vitro evaluation; Cooper, J.A. / Lu, H.H. / Ko, F.K. / Freeman, J.W. / Laurencin, C.T., Biomaterials, May 2005 AutoPore Fiber-Supported Perovskites for Catalytic Combustion of Natural Gas ; D. Klvana A,* , J. 168 FlowSorb + Kirchnerova A , J. Chaouki A , J. Delval A , W. Yaici B , Catalysis Today 47 (1999) 115-- AutoPore 121 169 Fixing Arsenic in Alkali-Activated Cementitious Matrices; A Fernandez-Jimenez, A Palomo, DE Macphee, EE …, Journal of the American Ceramic Society, 2005 PoreSizer 170 Formation and characteristics of zirconium ultrafiltration dynamic membranes of various pore sizes Journal of Membrane Science, Volume 143, Issues 1-2, 27 May 1998, Pages AutoPore 65-73 C. C. Chen and B. H. Chiang 171 Formation of an Al2O3-coated catalyst with a metallic core by anodic oxidation of aluminium Applied Catalysis, Volume 5, Issue 2, 15 February 1983, Pages 179-198 D. AutoPore Hnicke 172 Formation of zirconia foams using the thermostimulated sol-gel transition Journal of Non- Crystalline Solids, Volume 304, Issues 1-3, June 2002, Pages 143-150 E. P. Santos, C. V. AutoPore + Geopyc Santilli and S. H. Pulcinelli 173 Formation, sintering and thermal expansion behaviour of Sr- and Mg-doped LaCrO3 as SOFC interconnector prepared by the ethylene glycol polymerized complex solution AutoPore synthesis method Journal of the European Ceramic Society, Volume 24, Issue 9, August 200 174 FT-IR and Porosity Study of Si-BCO Materials Obtained from TEOS-TEB-PDMS Derived Gel Precursors; RA Peña-Alonso, JA Rubio, FA Rubio, JLA Oteo, Journal of Sol-Gel Science and Technology, 2003 AutoPore 175 Full verification of the liquid exclusion-adsorption chromatography theory using monolithic capillary columns; Lacharme, F. / Lapeyre, V. / Ravaine, V., Journal of Chromatography A, May 2005 AutoPore

Mercury Porosimeter References, Page 663 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

176 Functional polymers supported on porous silica. II.Radical polymerization of vinylbenzyl chloride from grafted precursors Reactive Polymers, Volume 16, Issue 2, February 1992, AutoPore Pages 115-124 Eric Carlier, Alain Guyot and Andr Revillon 177 Functional silica supported polymer V 'Onto' versus 'from' grafting processes Reactive and Functional Polymers, Volume 26, Issues 1-3, September 1995, Pages 105-118 Andr AutoPore Revillon and Denis Leroux 178 Gas flow through highly porous graphite matrices Carbon, Volume 41, Issue 3, 2003, Accupyc + AutoPore Pages 525-537 S. Bilo and S. Mauran 179 Gas sensing characteristics of BaTiO3-based ceramics Materials Chemistry and Physics, AutoPore Volume 85, Issue 1, 15 May 2004, Pages 47-51 K. Park and D. J. Seo 180 Gelatin manipulation of latent macropores formation in brushite cement; YG Yin, FG Ye, SG Cai, KG Yao, JG Cui, XG Song, Journal of Materials Science: Materials in Medicine, 2003 PoreSizer 181 Glass-ceramic for low temperature co-fired dielectric ceramic materials based on La2O3- B2O3-TiO2 glass with BNT..., ; Jung, B.H. / Hwang, S.J. / Kim, H.S., Journal of the European Ceramic Society, Aug 2005 AutoPore 182 Granular phase changing composites for thermal energy storage; Zhang, D. / Zhou, J. / Wu, K. / Li, Z., Solar Energy, Mar 2005 AutoPore 183 Granule deformation and densification during compression of binary mixtures of granules International Journal of Pharmaceutics, Volume 222, Issue 1, 3 July 2001, Pages 65-76 sa Accupyc + AutoPore Tunn and Gran Alderborn 184 High porosity SiC ceramics prepared via a process involving an SHS stage Journal of the European Ceramic Society, Volume 23, Issue 11, October 2003, Pages 1949-1956 Aurore AutoPore Morancais, Franois Louvet, David Stanley Smith and Jean-Pierre Bonnet

185 High Thermal Conductivity Aluminum Nitride Substrates Prepared by Aqueous Tape Casting; X Luo, J Li, B Zhang, W Li, H Zhuang, Journal of the American Ceramic Society, 2006 PoreSizer 186 Highly copper(II)-selective chelating ion-exchange resins based ion bis(imidazole)- modified glycidyl methacrylate copolymers Reactive and Functional Polymers, Volume AutoPore 32, Issue 2, February 1997, Pages 139-151 P. M. van Berkel, M. Punt, G. J. A. A. Kool

187 High-pressure electroosmotic pumps based on porous polymer monoliths Sensors and Actuators B: Chemical, Volume 99, Issue 1, 15 April 2004, Pages 66-73 Jennifer A. AutoPore Tripp, Frantisek Svec, Jean M. J. Frchet, Shulin Zeng, James C. Mikkelsen and Juan G. S

188 How Cr2O3 influences the microstructure and nonohmic features of the SnO2(Cox, Mn1- x)O-based varistor system; Bacelar, W.K. / Bueno, P.R. / Leite, E.R. / Longo, E. / Varela, J.A., Journal of the European Ceramic Society, Jan 2006 PoreSizer 189 Hydraulic activity of cement mixed with slag from vitrified Solid Waste Incinerator Fly Ash; KL Lin, KS Wang, BY Tzeng, CY Lin, Waste Management & Research, 2003 AutoPore 190 Hydrothermal dewatering of lower rank coals. 1. Effects of process conditions on the properties of dried product Fuel, Volume 82, Issue 1, January 2003, Pages 53-57 George AutoPore Favas and W. Roy Jackson Hydroxyapatite suspensions as precursors of pieces obtained by gelcasting method 191 AutoPore + Journal of the European Ceramic Society, Volume 24, Issue 8, July 2004, Pages 2223- SediGraph 2232 S. Padilla, R. Garca-Carrodeguas and M. Vallet-Reg 192 Immersional wetting of zirconium silicate surfaces Dyes and Pigments, Volume 34, Issue AutoPore + Gemini 2, June 1997, Pages 109-120 P. A. Chan, J. T. Guthrie and P. J. Smith 193 Immobilization of heavy metals by calcium sulfoaluminate cement; Peysson, S. / Pera, J. / Chabannet, M., Cement and Concrete Research, Dec 2005 AutoPore 194 Immobilization of mercury and zinc in an alkali-activated slag matrix Journal of Hazardous Materials, Volume 101, Issue 1, 4 July 2003, Pages 65-77 Guangren Qian, AutoPore Darren Delai Sun and Joo Hwa Tay

Mercury Porosimeter References, Page 664 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

195 Immobilized Yeast Membranes as Biocatalysts for Sucrose Inversion; GAU Kovalenko, LVU Perminova, GVU Plaksin, OVU …, Applied and Microbiology, 2005 AutoPore 196 Impact of Pulsed Electric Fields on the Dehydration and Physical Properties of Apple and Potato …; PV Arevalo, MOV Ngadi, MIV Bazhal, GSVV Raghavan, Drying Technology, 2004 AutoPore 197 Improved performance of silica membranes for gas separation Journal of Membrane Science, Volume 143, Issues 1-2, 27 May 1998, Pages 37-51 Renate M. de Vos and Henk AutoPore Verweij 198 In Situ Growth of beta-SiC Nanowires in Porous SiC Ceramics; S ZHU, HA XI, Q LI, R WANG, Journal of the American Ceramic Society, 2005 PoreSizer In vitro release of gentamicin from OHAp/PEMA/PMMA samples Journal of Controlled 199 AutoPore + Release, Volume 83, Issue 3, 30 October 2002, Pages 343-352 S. Padilla, R. P. del Real SediGraph and M. Vallet-Reg 200 In vivo biocompatibilty and degradation behavior of elastic poly(-lactide-co-[epsiv]- Gemini + caprolactone) scaffolds Biomaterials, Volume 25, Issue 28, December 2004, Pages 5939- Micromeritics' 5946 Sung In Jeong, Byung-Soo Kim, Sun Woong Kang, Jae Hyun Kwon, Young Moo mercury intrusion analyzer Lee, 201 In vivo bone response to porous calcium phosphate cement; RP Del Real, E Ooms, JGC Wolke, M Vallet-Regi, JA …, Journal of Biomedical Materials Research, 2003 AutoPore 202 Influence of Boron Concentration on the Surface Properties of TEOS-PDMS Hybrid Materials; RNP Peña-Alonso, ANP Tamayo, FNP Rubio, JNP Rubio, Journal of Sol-Gel Science and Technology, 2005 AutoPore 203 Influence of cathode gas diffusion media on the performance of the PEMFCs; Prasanna, M. / Ha, H.Y. / Cho, E.A. / Hong, S.-A. / Oh, I.-H., Journal of Power Sources, May 2004 AutoPore

204 Influence of firing temperature on frost resistance of roofing tiles; Ikeda, K. / Kim, H.-S. / PoreSizer Kaizu, K. / Higashi, A., Journal of the European Ceramic Society, Nov 2004 205 Influence of K2O addition on the aromatization functionality of Al2O3-supported Cr2O3 catalysts in the transformation of isophorone Applied Catalysis A: General, Volume 209, AutoPore Issues 1-2, 28 February 2001, Pages 335-344 B. David Raju, K. S. Rama Rao, G

206 Influence of mineralogy and firing temperature on the porosity of bricks Journal of the European Ceramic Society, Volume 24, Issue 3, March 2004, Pages 547-564 Giuseppe AutoPore Cultrone, Eduardo Sebastin, Kerstin Elert, Maria Jos de la Torre, Olga Cazalla an

207 Influence of paste composition and curing program used for the production of positive plates with PbSnCa grids on the performance of lead acid batteries Journal of Power AutoPore Sources, Volume 114, Issue 1, 25 February 2003, Pages 137-159 D. Pavlov, M. Dimi

208 Influence of pelleting conditions on catalyst pore structure and effectiveness Applied Catalysis, Volume 28, 1986, Pages 133-142 Jan Uchytil, Milos Kraus and Petr Schneider AutoPore

209 Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells Journal of Power Sources, Volume 108, Issues 1-2, 1 June AutoPore 2002, Pages 185-191 Chang Sun Kong, Do-Young Kim, Han-Kyu Lee, Yong-Gun Sh

210 Influence of porosity and water content on the diffusivity of CO2 and O2 through hydrated cement paste Cement and Concrete Research, Volume 24, Issue 6, 1994, Pages 1165-1176 AutoPore Yves F. Houst and Folker H. Wittmann 211 Influence of processing on the characteristics of matrix pellets based on microcrystalline waxes and starch derivatives International Journal of Pharmaceutics, Volume 147, Issue 1, AutoPore 14 February 1997, Pages 23-30 F. Zhou, C. Vervaet and J. P. Remon

Mercury Porosimeter References, Page 665 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

212 Influence of Pulsed Electroplasmolysis on the Porous Structure of Apple Tissue Biosystems Engineering, Volume 86, Issue 1, September 2003, Pages 51-57 Maksym I. AutoPore Bazhal, Michael O. Ngadi and Vijaya G. S. Raghavan 213 Influence of temperature-induced coalescence effects on co-continuous morphology in poly(e-caprolactone)/polystyrene...; Sarazin, P. / Favis, B.D., Polymer, Jul 2005 PoreSizer 214 Influence of the basicity of alumina catalysts on their activity in the H2S+SO2 reaction Catalysis Today, Volume 5, Issue 4, June 1989, Pages 423-431 J. L. Zotin and A. C. Faro, AutoPore Jr. 215 Influence of the formulation composition on the in vitro characteristics of hot stage extrudates International Journal of Pharmaceutics, Volume 188, Issue 1, 15 October AutoPore 1999, Pages 111-119 D. Henrist and J. P. Remon 216 Influence of the liquid saturation degree on the fluid dynamics of a spouted-bed coater Chemical Engineering and Processing, In Press, Corrected Proof, Available online 8 Accupyc + AutoPore March 2004 M. G. A. Vieira and S. C. S. Rocha 217 Influence of the morphology of poly(EGDMA-co-HEMA) on the chemical modifications and retention of O-phosphothreonine Journal of Biochemical and Biophysical Methods, AutoPore Volume 55, Issue 1, 31 January 2003, Pages 23-36 Cesar G. Gomez, Cecilia I. Alvarez an

218 Influence of the polymeric morphology of sorbents on their properties in affinity chromatography Journal of Biochemical and Biophysical Methods, Volume 49, Issues 1-3, AutoPore 30 October 2001, Pages 141-151 Cecilia I. Alvarez, Cesar G. Gomez and Miriam C. Str

219 Influence of the process parameters on the characteristics of starch based hot stage extrudates International Journal of Pharmaceutics, Volume 189, Issue 1, 28 October AutoPore 1999, Pages 7-17 D. Henrist and J. P. Remon 220 Interaction of divalent copper with two diaminealkyl hexagonal mesoporous silicas evaluated by adsorption and...; Sales, J.A.A. / Prado, A.G.S. / Airoldi, C., Surface FlowSorb + Science, Sept 2005 PoreSizer 221 Interfacial reactions, thermodynamics and kinetics in doped aluminosilicate ceramics/liquid Al-alloy …; M Oliveira, S Agathopoulos, J Lino, JMF Ferreira, Materials Science Forum, 2004 PoreSizer 222 Investigation of applicability of the various adsorption models of methylene blue adsorption onto lignite/water interface Energy Conversion and Management, In Press, AutoPore Corrected Proof, Available online 18 March 2004 S. Karaca , A. Grses and R. Bayrak

223 Kieselguhr-Mullite ceramic membrane substrate fabricated by line compounding technique Journal of Membrane Science, Volume 204, Issues 1-2, 15 July 2002, Pages 89- AutoPore 95 Chuan-Feng Li and Shun-He Zhong 224 Kinetic Study of High-Temperature Removal of H2S by Novel Metal Oxide Sorbents ; Enrique GarciA, - Cristina Cilleruelo, - JoseV. Ibarra,* ,- Miguel Pineda, - and JoseM. Palacios - , Ind. Eng. Chem. Res. (1997), 36, 846-853 PoreSizer 225 Kinetics and thermodynamics of the adsorption of some dyestuffs and p-nitrophenol by chitosan and MCM-chitosan from aqueous solution Journal of Colloid and Interface AutoPore Science, Volume 274, Issue 2, 15 June 2004, Pages 398-412 Ilhan Uzun and Fuat Gzel

226 L’oxydation à l’air de réfractaires à base de carbure et de nitrure de silicium; A ZYMLA, V ZYMLA, T PAWLIK, M SOPICKA-LIZER, JB …, Revue de métallurgie(Paris), 2004 PoreSizer 227 Large pore nickel/silica--alumina catalysts for hydrogenation of synthetic distillates : Effects of composition and structure Applied Catalysis, Volume 41, 1988, Pages 177-198 AutoPore M. F. WilsonP. R. MainwaringJ. R. Brown and J. F. Kriz 228 LiFeO2-LiCoO2-NiO materials for Molten Carbonate Fuel Cell cathodes. Part II. Fabrication and characterization of...; Wijayasinghe, A. / Bergman, B. / Lagergren, C., Solid State Ionics, Jan 2006 PoreSizer

Mercury Porosimeter References, Page 666 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

229 Liquid-expulsion perm-porometry for characterization of porous solids Microporous and Mesoporous Materials, Volume 65, Issues 2-3, 4 November 2003, Pages 209-217 O. Accupyc + AutoPore Solcov, Hana Snajdaufov and P. Schneider 230 Long term behavior of concrete in nuclear waste repositories Nuclear Engineering and Design, Volume 138, Issue 2, 1 December 1992, Pages 157-164 F. Jacobs and F. H. AutoPore Wittmann 231 Low-temperature fully dense and electrical properties of doped-ZnO varistors by a polymerized complex method Journal of the European Ceramic Society, Volume 22, Issue AutoPore 1, January 2002, Pages 67-77 Pedro Durn, Francisco Capel, Jess Tartaj and Carlos Mou

232 Low-temperature sintering and electrical properties of chemically w-doped Bi4Ti3O12 ceramics Journal of the European Ceramic Society, Volume 19, Issues 6-7, June 1999, AutoPore Pages 1183-1186 Marina Villegas, Amador C. Caballero, Carlos Moure, Pedro Durn and

233 Low-temperature sintering and microstructural development of nanocrystalline Y-TZP powders Journal of the European Ceramic Society, Volume 16, Issue 9, 1996, Pages 945- AutoPore 952 P. Durn , M. Villegas , F. Capel , P. Recio and C. Moure 234 Low-temperature sintering of submicronic randomly oriented Bi4Ti3O12 materials Ceramics International, Volume 22, Issue 1, 1996, Pages 15-22 M. Villegas, C. Moure, J. AutoPore F. Fernandez and P. Duran 235 Macroporous poly(N-isopropyl)acrylamide networks: formation conditions Polymer, AutoPore Volume 42, Issue 18, August 2001, Pages 7639-7652 Cigdem Sayil and Oguz Okay 236 Macroporous polymeric ion exchanger of high capacity for protein adsorption Biochemical Engineering Journal, Volume 11, Issue 1, May 2002, Pages 13-17 Xin Zhou, AutoPore Bo Xue, Shu Bai and Yan Sun 237 Manufacture of mullite substrates from andalusite for the development of thin film solar cells Journal of the European Ceramic Society, Volume 22, Issue 4, April 2002, Pages AutoPore 453-461 F. Mazel, M. Gonon and G. Fantozzi 238 Matrix mini-tablets based on starch/microcrystalline wax mixtures International Journal of Pharmaceutics, Volume 199, Issue 2, 20 April 2000, Pages 195-203 C. De Brabander, AutoPore C. Vervaet, L. Fiermans and J. P. Remon 239 Matrix pellets based on the combination of waxes, starches and maltodextrins International Journal of Pharmaceutics, Volume 133, Issues 1-2, 14 May 1996, Pages 155- AutoPore 160 F. Zhou, C. Vervaet and J. P. Remon 240 Mechanical strength of porous nickel plates containing lithium and their performance as the cathode for MCFC Journal of Power Sources, Volume 110, Issue 1, 20 July 2002, AutoPore Pages 80-85 Seung-Goo Kim, Sung Pil Yoon, Jonghee Han, Suk Woo Nam, Tae-Hoon Lim, Mechanisms of non-toxic anticorrosive pigments in organic waterborne coatings Progress 241 AutoPore + in Organic Coatings, Volume 49, Issue 4, May 2004, Pages 358-371 Malgorzata SediGraph Zubielewicz and Witold Gnot 242 Mechanisms of physical and reaction enhancement of mass transfer in a gas inducing stirred slurry reactor Chemical Engineering Journal, Volume 96, Issues 1-3, 15 December AutoPore 2003, Pages 55-69 K. C. Ruthiya, J. van der Schaaf, B. F. M. Kuster and J. C. Sc

243 Mechanisms of water storage and flow in the unsaturated zone of the Chalk aquifer Journal of , Volume 233, Issues 1-4, 12 June 2000, Pages 54-71 M. Price, R. G. AutoPore Low and C. McCann 244 Mechanistic evaluation of the glucose-induced reduction in initial burst release of octreotide acetate from poly(,-lactide-co-glycolide) microspheres Biomaterials, Volume AutoPore + Gemini 25, Issue 10, May 2004, Pages 1919-1927 Juan Wang, Barbara M. Wang and Steven P.

Mercury Porosimeter References, Page 667 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

245 Mechano-active tissue engineering of vascular smooth muscle using pulsatile perfusion bioreactors and elastic PLCL...; Jeong, S.I. / Kwon, J.H. / Lim, J.I. / Cho, S.-W. / Jung, Y. / Sung, W.J. / Kim, S.H. / Kim, Y.H. / Lee, Y.M. / Kim, B.-S., Biomaterials, Apr 2005 AutoPore 246 Membrane seal and tertiary migration pathways in the Bodalla South oilfield, Eromanga Basin, Australia Marine and Petroleum Geology, Volume 10, Issue 1, February 1993, AutoPore Pages 3-13 P. J. Boult 247 Mercury intrusion porosimetry in pulp and paper technology; Moura, M.J. / Ferreira, P.J. / Figueiredo, M.M., Powder Technology, Dec 2005 PoreSizer 248 Mercury Porosimetry Measurement To Obtain the Pore Size Distribution for the Used Ceramic Material Using A Micromeritics Pore Sizer PoreSizer 9305 ; Karlsson, S. , Swedish Ceramic Institute, Gothenburg, Sweden1996 PoreSizer 249 Metal binding affinity of imidazole ligands immobilized on poly(glycidyl methacrylateco- ethylene dimethacrylate) and on silica European Polymer Journal, Volume 29, Issue 12, AutoPore December 1993, Pages 1603-1614 P. D. Verweij, S. Sital, M. J. Haanepen, W. L.

250 Metal uptake by a novel benzimidazole ligand immobilized onto poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) Reactive Polymers, Volume 18, Issue 3, AutoPore December 1992, Pages 191-201 P. D. Verweij, J. S. N. van der Geest, W. L. Driessen, J. Re 251 Metal uptake by N,N'-bis(2-benzimidazolylmethyl) amine immobilized on poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) Reactive Polymers, Volume 14, Issue 3, AutoPore August 1991, Pages 213-227 P. D. Verweij, T. Dugu, W. L. Driessen, J. Reedijk, B.

252 Metal-uptake behaviour by a novel pyrazole-containing ligand immobilised on to poly(glycidyl methacrylate-co-trimethylolpropane trimethacrylate) European Polymer AutoPore Journal, Volume 33, Issue 2, February 1997, Pages 129-135 P. M. Van Berkel, W. L. Driesse 253 Microcracking and strength development of alkali activated slag concrete Cement and Concrete Composites, Volume 23, Issues 4-5, August-October 2001, Pages 345-352 AutoPore Frank Collins and J. G. Sanjayan 254 Microstructural analysis of RPC (Reactive Powder Concrete) Cement and Concrete Research, Volume 25, Issue 7, October 1995, Pages 1491-1500 Marcel Cheyrezy, AutoPore Vincent Maret and Laurent Frouin 255 Microstructural and mechanical characterization of titanium nitride produced by S.H.S.; Carole, D. / Frety, N. / Etienne-Calas, S. / Merlet, C. / Marin-Ayral, R.M., Materials Science & Engineering A, Mar 2006 AutoPore 256 Microstructural aspects in a polymer-modified cement Cement and Concrete Research, Volume 28, Issue 12, December 1998, Pages 1687-1693 R. Ollitrault-Fichet, C. Gauthier, AutoPore G. Clamen and P. Boch 257 Microstructure and mechanical properties of reaction-formed silicon carbide (RFSC) ceramics Materials Science and Engineering A, Volume 187, Issue 2, 10 November 1994, AutoPore Pages 183-187 M. Singh and D. R. Behrendt 258 Microstructure development and densification of ultrafine Y-TZP monoliths obtained by seeding-assisted chemical coprecipitation Journal of the European Ceramic Society, AutoPore Volume 20, Issue 2, February 2000, Pages 169-176 J. Tartaj, E. Lachowski, J. F. Fe

259 Microstructure development of high-purity mullite by high energy mixing of fumed oxide PoreSizer powders; Lee, H.-W. / Yoo, J.-Y. / Kim, J. / Lee, J., Scripta Materialia, Apr 2004 260 Microstructure of PTFE and acid absorption behavior in PTFE-bonded carbon electrodes International Journal of Hydrogen Energy, Volume 21, Issue 7, July 1996, Pages 541-546 AutoPore Byung-Woo Choi, Su-Jin Chung and Dong-Ryul Shin 261 Microstructure-property modifications in plasma sprayed 20 wt.% yttria stabilized zirconia electrolyte by spark plasma...; Khor, K.A. / Chen, X.J. / Chan, S.H. / Yu, L.G., Materials AutoPore Science and Engineering: A, Feb 2004

Mercury Porosimeter References, Page 668 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

262 Microwave-treated gelatin microspheres as drug delivery system Journal of Controlled Release, Volume 96, Issue 1, 16 April 2004, Pages 67-84 Maria Angela Vandelli , AutoPore Marcello Romagnoli , Alessandra Monti , Manuela Gozzi , Paolo Guerra , Francesco Riva

263 Mineralogical and physical behaviour of solid bricks with additives Construction and Building Materials, In Press, Corrected Proof, Available online 19 June 2004 G. AutoPore Cultrone, E. Sebastin and M. J. de la Torre 264 Modelling of drug release from coated granular pellets Journal of Controlled Release, Volume 92, Issues 1-2, 19 September 2003, Pages 113-123 Gran Frenning, sa Tunn and AutoPore Gran Alderborn 265 Modelling of the transition zone porosity Cement and Concrete Research, Volume 25, AutoPore Issue 4, May 1995, Pages 741-751 B. Bourdette, E. Ringot and J. P. Ollivier 266 Modified calcium carbonate coatings with rapid absorption and extensive liquid uptake capacity Colloids and Surfaces A: Physicochemical and Engineering Aspects, Volume AutoPore 236, Issues 1-3, 1 April 2004, Pages 91-102 Cathy J. Ridgway , Patrick A. C. Gane a

267 Modulation of the tabletting behaviour of microcrystalline cellulose pellets by the incorporation of polyethylene glycol European Journal of Pharmaceutical Sciences, AutoPore Volume 9, Issue 1, October 1999, Pages 57-65 Fredrik Nicklasson and Gran Alderborn

268 Molecular imprinting of flat polycondensed aromatic molecules in macroporous polymers Polymer, Volume 34, Issue 1, 1993, Pages 77-84 I. R. Dunkin, J. Lenfeld and D. C. AutoPore Sherrington 269 Morphological control of PEMFC electrode by graft polymerization of polymer electrolyte onto platinum-supported carbon...; Mizuhata, H. / Nakao, S.-i. / Yamaguchi, T., Journal AutoPore of Power Sources, Nov 2004 270 Multicomponent counter-current gas diffusion in porous solids: the Graham's-law diffusion cell Chemical Engineering Science, Volume 56, Issue 17, September 2001, AutoPore Pages 5231-5237 O. Solcov, H. Snajdaufov and P. Schneider 271 Multicomponent counter-current gas diffusion: determination of transport parameters Applied Catalysis A: General, Volume 244, Issue 1, 8 May 2003, Pages 1-9 O. Solcov and Accupyc + AutoPore P. Schneider 272 Multicomponent oxide catalysts for the oxidation of methanol to formaldehyde Applied Catalysis, Volume 77, Issue 1, 1 October 1991, Pages 55-66 D. Klissurski, Y. Pesheva AutoPore and N. AbadjievaI. Mitov, D. Filkova and L. Petrov 273 Nanofiber alignment and direction of mechanical strain affect the ECM production of human ACL fibroblast Biomaterials, In Press, Corrected Proof, Available online 11 June AutoPore 2004 Chang Hun Lee, Ho Joon Shin, In Hee Cho, Young-Mi Kang, In Ae Kim, Ki-Dong

274 Nanostructured carbonaceous material with continuous pores obtained from reaction- induced phase separation of miscible...; Yamazaki, M. / Kayama, M. / Ikeda, K. / Alii, T. AutoPore / Ichihara, S., Carbon, Jan 2004 275 New developments on valve-regulated lead-acid batteries for advanced automotive electrical systems; Soria, M.L. / Hernandez, J.C. / Valenciano, J. / Sanchez, A. / Trinidad, F., Journal of Power Sources, Jun 2005 AutoPore 276 nfiltration of SiO 2/SiOC Nanocomposites by a Multiple Sol Infiltration-Pyrolysis Process; CJ Martos, FJ Rubio, JJ Rubio, JLJ Oteo, Journal of Sol-Gel Science and Technology, 2003 AutoPore 277 Nonaqueous UFC suspensions, used as conductive additive in cathodes for lithium batteries Journal of Power Sources, Volumes 81-82, September 1999, Pages 566-570 A. AutoPore Momchilov, A. Trifonova, B. Banov, B. Pourecheva and A. Kozawa 278 Novel monolithic materials using poly(ethylene glycol) as porogen for protein separation; AutoPore + Courtois, J. / Bystrom, E. / Irgum, K., Polymer, Apr 2006 FlowSorb

Mercury Porosimeter References, Page 669 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

279 Novel porous separator based on PVdF and PE non-woven matrix for rechargeable lithium batteries; Lee, Y.M. / Kim, J.-W. / Choi, N.-S. / Lee, J.A. / Seol, W.-H. / Park, J.-K., Journal of Power Sources, Jan 2005 AutoPore 280 On the relationship between pore structure and charge passed from RCPT in -free cement-based materials; Yang, C.C. / Chiang, C.T., Materials Chemistry & Physics, Sept 2005 AutoPore 281 On-line concentration of peptides and proteins with the hyphenation of polymer monolithic …; PR Dalian, Electrophoresis, 2005 PoreSizer 282 Optimization of a polymeric HPLC phase: poly(glycidyl methacrylate-co-ethylene dimethacrylate): Influence of the polymerization conditions on the pore structure of AutoPore macroporous beads Reactive and Functional Polymers, Volume 56, Issue 2, 6 August 2003, P 283 Origin of the strength change of silicon nitride ceramics with the alteration of spray drying conditions Journal of the European Ceramic Society, Volume 21, Issue 5, May 2001, AutoPore Pages 603-610 Tadashi Hotta, Kenji Nakahira, Makio Naito, Nobuhiro Shinohar 284 Original Paper Polymer-based monolithic microcolumns for hydrophobic interaction chromatography of …; P Hemström, A Nordborg, K Irgum, F Svec, JMJ …, J. Sep. Sci, 2006 AutoPore 285 Oscillational corrosion potential of HastelloyC coatings fabricated by GS-HVOF spraying; Kawakita, J. / Kuroda, S., Corrosion Science, Aug 2005 AutoPore 286 Oxidation behavior of matrix-inhibited carbon/carbon composites Carbon, Volume 26, AutoPore Issue 5, 1988, Pages 659-664 D. W. McKee 287 Oxygen permeation through the LSCO-80/CeO2 asymmetric tubular membrane reactor; Yin, X. / Hong, L. / Liu, Z.L., Journal of Membrane Science, Jan 2006 AutoPore 288 Oxygen transfer and catalytic properties of nickel iron oxides for steam reforming of methane; Sturzenegger, M. / D'Souza, L. / Struis, R.P.W.J. / Stucki, S., Fuel, Jul 2006 AutoPore 289 Performance of mechanically shaken indirect contact atmospheric dryer in drying pastelike materials; KP Melo, MA Cremasco, Braz. J. Chem. Eng, 2004 AccuPyc + AutoPore 290 PHASE SEPARATION IN SOL-GEL PROCESS OF ALKOXIDE-DERIVED SILICA- ZIRCONIA IN THE PRESENCE OF …; R Takahashi, S Sato, T Sodesawa, K Suzuki, M Tafu, …, J. Am. Ceram. Soc., 2001 PoreSizer 291 Phases in La2O3 and NiO doped (Zr,Sn)TiO4 microwave dielectric ceramics Journal of the European Ceramic Society, Volume 19, Issues 6-7, June 1999, Pages 1095-1099 D. Accupyc + AutoPore Houivet, J. El Fallah and J. -M. Haussonne 292 Photocatalytic activity of hydroxyapatite for methyl mercaptane Journal of Molecular Catalysis A: Chemical, Volume 179, Issues 1-2, 18 February 2002, Pages 193-200 AutoPore Harumitsu Nishikawa and Koichi Omamiuda 293 Photopolymerized monolithic capillary columns for rapid micro high-performance liquid chromatographic separation of proteins Journal of Chromatography A, In Press, Corrected AutoPore Proof, Available online 28 May 2004 Dean Lee, Frantisek Svec and Jean M. J. F

294 Physical and chemical characteristics of densified low-rank coals Fuel, Volume 72, Issue AutoPore 6, June 1993, Pages 755-761 Anthony G. Pandolfo and R. Basil Johns 295 Physicochemical comparison between microcrystalline cellulose and silicified microcrystalline cellulose International Journal of Pharmaceutics, Volume 169, Issue 2, 15 Accupyc + AutoPore July 1998, Pages 183-194 Michael J. Tobyn, Gerard P. McCarthy, John N. Staniforth a

296 Physicochemical properties and mechanism of drug release from ethyl cellulose matrix tablets prepared by direct compression and hot-melt extrusion International Journal of Pharmaceutics, Volume 269, Issue 2, 28 January 2004, Pages 509-522 Michael M. AutoPore + AccuPyc 297 Platinum/[gamma]-Al2O3 catalytic membrane: preparation,morphological and catalytic characterizations Applied Catalysis A: General, Volume 96, Issue 1, 8 March 1993, Pages AutoPore 83-97 D. Uzio, J. Peureux and A. Giroir-FendlerM. TorresJ. Ramsay and J. -A. Dal

Mercury Porosimeter References, Page 670 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

298 Poly(-lactic acid)/triblock PCL-PDMS-PCL copolymers: synthesis, characterization and demonstration of their cell growth effects in vitro Polymer, Volume 42, Issue 9, April AutoPore 2001, Pages 4109-4116 N. Kayaman-Apohan, O. Karal-Yilmaz, K. Baysal and B. M. B

299 Pore formation in tablets compressed from binary mixtures as a result of deformation and relaxation of particles European Journal of Pharmaceutical Sciences, Volume 15, Issue 2, AutoPore March 2002, Pages 171-177 B. van Veen, K. van der Voort Maarschalk, G. K. 300 Pore model for the fibrous collagen matrix in animal skins Chemical Engineering Science, Volume 50, Issue 5, March 1995, Pages 890-897 S. Panduranga Rao, T. Murugesan, M. AutoPore Surianarayan and K. V. Raghavan 301 Pore size distribution and degree of hydration of metakaolin-cement pastes Cement and Concrete Research, Volume 30, Issue 4, April 2000, Pages 561-569 Moiss Fras and AutoPore Joseph Cabrera 302 Pore size distribution of hydrated cement pastes modified with polymers Cement and Concrete Research, Volume 31, Issue 8, August 2001, Pages 1177-1184 D. A. Silva, V. AutoPore M. John, J. L. D. Ribeiro and H. R. Roman 303 Pore structure characterization of deep-fat-fried chicken meat Journal of Food Engineering, In Press, Corrected Proof, Available online 21 May 2004 L. S. Kassama and AutoPore M. O. Ngadi 304 Pore structures of stoichiometric and nonstoichiometric Al-P-O catalysts Materials Chemistry and Physics, Volume 13, Issue 5, November 1985, Pages 409-421 A. AutoPore Schmidtmeyer and J. B. Moffat 305 Pore volume and surface area of the Carboniferous coals from the Zonguldak basin (NW Turkey) and their variations with rank and maceral composition International Journal of AutoPore + Gemini Coal Geology, Volume 48, Issues 1-2, December 2001, Pages 133-144 Glbin Grdal

306 Pore volume determination by density of porous copolymer beads in dry state Reactive and Functional Polymers, Volume 50, Issue 2, January 2002, Pages 125-130 Muhammad AutoPore Arif Malik, Ejaz ur-Rehman, Riffat Naheed and Nasir Mahmood Alam 307 Porosity and pore size distribution in cooked meat patties containing soy protein; MO Ngadi, LS Kassama, GSV Raghavan, Canadian Biosystems Engineering, 2001 AutoPore 308 Porosity measurements by a gas penetration method and other techniques applied to membrane characterization Thin Solid Films, Volume 348, Issues 1-2, 6 July 1999, Pages AutoPore 22-29 L. Palacio, P. Prdanos, J. I. Calvo and A. Hernndez 309 Porous AlN ceramic substrates by reaction sintering Journal of Materials Processing Technology, Volume 140, Issues 1-3, 22 September 2003, Pages 413-419 F. Y. C. Boey AutoPore and A. I. Y. Tok 310 Porous glass electroosmotic pumps: design and experiments Journal of Colloid and Interface Science, Volume 268, Issue 1, 1 December 2003, Pages 143-153 Shuhuai Yao, AutoPore David E. Hertzog, Shulin Zeng, James C. Mikkelsen, Jr. and Juan G. Santiago 311 Porous polymer scaffolds surface-modified with arginine-glycine-aspartic acid enhance bone cell …; Y Hu, SR Winn, I Krajbich, JO Hollinger, Journal of Biomedical Materials Research, 2003 AutoPore 312 Porous structure of aluminium hydroxide and its content of pseudoboehmite Applied Catalysis, Volume 74, Issue 1, 27 June 1991, Pages 29-36 Josef RocekKarl Heinz Heeg, AutoPore Ursula SteinikeKveta Jirtov 313 Powder particle sizes from mercury porosimet Powder Technology, Volume 59, Issue 3, AutoPore + November 1989, Pages 163-171 R. Pospech and P. Schneirder SediGraph 314 Practical observation of deviation from Lucas-Washburn scaling in porous media Colloids and Surfaces A: Physicochemical and Engineering Aspects, Volume 206, Issues AutoPore + 1-3, 9 July 2002, Pages 445-454 Joachim Schoelkopf, Patrick A. C. Gane, Cathy J. SediGraph Ridgwa 315 Preparation and characterization of matrix retaining electrolyte for a phosphoric acid fuel cell by non-volatile solvent, NMP Journal of Power Sources, Volume 124, Issue 1, 1 AutoPore October 2003, Pages 47-51 Ki Hyun Yoon and Byung Duk Yang

Mercury Porosimeter References, Page 671 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

Preparation and in vitro bioactivity of hydroxyapatite/solgel glass biphasic material 316 AutoPore + Biomaterials, Volume 23, Issue 8, April 2002, Pages 1865-1872 C. V. Ragel, M. Vallet- SediGraph Reg and L. M. Rodrguez-Lorenzo 317 Preparation and Porous Property of C 14-Monolithic Column for Capillary Electrochromatography; KM Zhang, RM Gao, CM Yan, ZM Zhang, QM Wang, Chromatographia, 2005 AutoPore 318 Preparation of a perovskite La0.2Sr0.8CoO3-x membrane on a porous MgO substrate Journal of the European Ceramic Society, Volume 21, Issue 12, October 2001, Pages AutoPore 2207-2215 Liang Hong, Xingfu Chen and Zhendan Cao 319 Preparation of a porous ITO electrode; Lin, H. / Jin, T. / Dmytruk, A. / Saito, M. / AutoPore Yazawa, T., Journal of and Photobiology A: Chemistry, Jun 2004 320 Preparation of a translucent, conductive, porous nanocomposite.; H Lin, T Jin, A Dmytruk, T Yazawa, Journal of the American Ceramic Society, 2003 AutoPore 321 Preparation of alginate beads for floating drug delivery system: effects of CO2 gas- forming agents International Journal of Pharmaceutics, Volume 239, Issues 1-2, 4 June AutoPore 2002, Pages 81-91 B. Y. Choi, H. J. Park, S. J. Hwang and J. B. Park 322 Preparation of aluminum nitride green sheets by aqueous tape casting; Luo, X.-J. / Zhang, PoreSizer B.-L. / Li, W.-L. / Zhuang, H.-R., Ceramics International, Jan 2004 323 Preparation of macroporous TiO 2 constituted of fibrous structures; SV Nagamine, IV Masuda, TV Ueda, CV Su, EV Sasaoka, Journal of Materials Science Letters, 2003 AutoPore 324 Preparation of palladium membrane over porous stainless steel tube modified with zirconium oxide; Wang, D. / Tong, J. / Xu, H. / Matsumura, Y., Catalysis Today, Sep PoreSizer 2004 325 Preparation of porous materials with controlled pore size and porosity Journal of the European Ceramic Society, Volume 24, Issue 2, 2004, Pages 341-344 Fengqiu Tang, AutoPore Hiroshi Fudouzi, Tetsuo Uchikoshi and Yoshio Sakka 326 Preparation of Porous Spherical MgCl; T Jiang, W Chen, F Zhao, Y Liu, R Wang, H Du, T …, Journal of Applied Polymer Science, 2005 AutoPore 327 Processing and characterization of microfiltration supports prepared from alumina powders Ceramics International, Volume 22, Issue 1, 1996, Pages 23-26 Gamze Gl Avci, AutoPore Zlal Misirli and Volkan Gnay 328 Processing and microstructure of SiC laminar composites International Journal of Refractory Metals and Hard Materials, Volume 19, Issues 4-6, July-November 2001, AutoPore Pages 425-435 C. Reynaud, F. Thevenot and T. Chartier 329 Production of granular activated carbon from waste Rosa canina sp. seeds and its adsorption characteristics for dye; Gurses, A. / Dogar, C. / Karaca, S. / Acikyildiz, M. / Bayrak, R., Journal of Hazardous Materials, Apr 2006 AutoPore 330 Production of morph-genetic TiC/C ceramic Materials Letters, Volume 58, Issue 5, AutoPore February 2004, Pages 798-801 Binghe Sun, Tongxiang Fan and Di Zhang 331 Properties of paper coated with kaolin: The influence of the rheological modifier; Conceicao, S. / Santos, N.F. / Velho, J. / Ferreira, J.M.F., Applied Clay Science, Nov 2005 PoreSizer Rapid pyrolysis of agricultural residues at high temperature Biomass and Bioenergy, 332 AutoPore + Volume 23, Issue 5, November 2002, Pages 357-366 Rolando Zanzi, Krister Sjstrm and FlowSorb Emilia Bjrnbom 333 Reaction sintering of zircon-dolomite mixtures Journal of the European Ceramic Society, Volume 21, Issue 3, March 2001, Pages 343-354 J. L. Rodrguez, M. A. Rodrguez, S. De AutoPore Aza and P. Pena 334 Reactivity evolution during sulfidation of porous zinc oxide Chemical Engineering Science, Volume 48, Issue 5, 1993, Pages 829-843 Evangelos A. Efthimiadis and Stratis AutoPore V. Sotirchos 335 Reduction kinetics of ceria surface by hydrogen; Al-Madfaa, H.A. / Khader, M.M., PoreSizer Materials Chemistry and Physics, Jul 2004 336 Reduction kinetics of ceria surface by hydrogen; HA Al-Madfa, MM Khader, MA Morris, International Journal of , 2004 PoreSizer

Mercury Porosimeter References, Page 672 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

337 Rehydration and microstructure of cement paste after heating at temperatures up to 300 C Cement and Concrete Research, Volume 33, Issue 7, July 2003, Pages 1047-1056 M. C. AutoPore R. Farage, J. Sercombe and C. Gall 338 Removal of nitric oxide from flue gas using mixed oxide sorbents Fuel Processing Technology, Volume 22, Issue 1, April 1989, Pages 5-24 J. Gorst, D. D. Do and N. J. AutoPore Desai 339 Role of the support of the nickel catalyst in the synthesis of morpholine from diethylene glycol and ammonia Journal of Molecular Catalysis, Volume 88, Issue 2, 10 March 1994, AutoPore Pages 193-203 Olga Solcov and Kveta Jirtov 340 Screening of sorbents and capture of lead and cadmium compounds during sewage sludge FlowSorb + combustion; Yao, H. / Mkilaha, I.S.N. / Naruse, I., Fuel, May 2004 PoreSizer 341 Selective and rapid uptake of copper(II) by a novel chelating resin containing imidazole groups Reactive Polymers, Volume 13, Issues 1-2, September 1990, Pages 83-92 P. D. AutoPore Verweij, W. L. Driessen and J. ReedijkB. Rowatt and D. C. Sherrington 342 Selective and rapid uptake of Cu(II) by bis(benzimidazole) modified oxirane and thiirane resins Reactive and Functional Polymers, Volume 28, Issue 1, December 1995, Pages 39- AutoPore 54 P. M. van Berkel, D. J. Dijkstra, W. L. Driessen, J. Reedijk and D. C. Sh

343 Selective catalytic reduction of NO with C3H6 over Rh/alumina in the presence and absence of SO2 in the feed Applied Catalysis B: Environmental, Volume 22, Issue 2, 6 AutoPore September 1999, Pages 91-106 Evangelos A. Efthimiadis, Sophia C. Christoforou, Apost

Sepabeads FP series: New highly porous hydrophilic supports for protein separation 344 AutoPore + Reactive Polymers, Ion Exchangers, Sorbents, Volume 8, Issue 2, April 1988, Pages 235- FlowSorb 243 Hiroshi Kusano, Eiji Miyata, Hiroaki Takayanagi and Takaharu Itagaki 345 Separation of ethanol/water mixture by silicalite membrane on pervaporation Journal of Membrane Science, Volume 95, Issue 3, 14 November 1994, Pages 221-228 Tsuneji AutoPore Sano, Hiroshi Yanagishita, Yoshimichi Kiyozumi, Fujio Mizukami and Kenji Haraya 346 Separators:Binder Changes Sintered Aln Pores ; , Battery & EV Technology, June 1, (1996) v21 i2 pN/A AutoPore 347 Silica deactivation of bead VOC catalysts Applied Catalysis B: Environmental, Volume 15, Issues 1-2, 15 January 1998, Pages 21-28 C. Libanati, D. A. Ullenius and C. J. Pereira AutoPore

348 Silica-ceria as support for the preparation of NiMo(P) hydrodesulfurization and hydrodenitrogenation catalysts Applied Catalysis A: General, Volume 125, Issue 1, 27 AutoPore April 1995, Pages 61-70 D. Gulkov and Z. Vt 349 Silicon carbide ceramics through temperature-induced gelation and pressureless sintering; Xu, X. / Mei, S. / Ferreira, J.M.F. / Nishimura, T. / Hirosaki, N., Materials Science and PoreSizer Engineering: A, Sep 2004 350 Sintering behaviour and microstructural evolution of agglomerated spherical particles of high-purity barium titanate Ceramics International, Volume 29, Issue 4, 2003, Pages 419- AutoPore 425 Pedro Duran, Jesus Tartaj and Carlos Moure 351 Sintering behaviour of Y2O3 powders prepared by the polymer complex solution method Ceramics International, Volume 28, Issue 7, 2002, Pages 791-803 P. Durn, J. Tartaj and AutoPore C. Moure 352 Sintering Kinetics of Undoped and Mn-Doped Zinc Oxide in the Intermediate Stage; J HAN, PQ MANTAS, AMR SENOS, Journal of the American Ceramic Society, 2005 PoreSizer 353 Soil micropore structure and carbon mineralization in burrows and casts of an anecic earthworm (Lumbricus terrestris) Soil Biology and Biochemistry, Volume 33, Issue 14, AutoPore November 2001, Pages 1881-1887 Josef H. Grres, Mary C. Savin and Jos A. Amador 354 Solid waste: terminological and long-term environmental risk assessment problems exemplified in a power plant fly ash study The Science of The Total Environment, AutoPore Volume 285, Issues 1-3, 21 February 2002, Pages 29-51 Irena Twardowska and Jadwiga Szczep

Mercury Porosimeter References, Page 673 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

355 Solvent debinding mechanism for alumina injection molded compacts with water-soluble binders Ceramics International, Volume 29, Issue 7, 2003, Pages 745-756 Wei-Wen AutoPore Yang, Kai-Yuan Yang, Moo-Chin Wang and Min-Hsiung Hon 356 Some physical properties of Canadian coals and their effects on coal reactivity Fuel, Volume 63, Issue 11, November 1984, Pages 1564-1569 Siauw H. Ng, David P. C. Fung AutoPore and Sang D. Kim 357 Starburst dendrimers as macromolecular pore-templates for stationary phases in capillary …; A Doneanu, GS Chirica, VT Remcho, Journal of Separation Science, 2002 AutoPore 358 Static and dynamic in vitro study of a sol-gel glass bioactivity Biomaterials, Volume 22, AutoPore Issue 16, 15 August 2001, Pages 2301-2306 A. Rmila and M. Vallet-Reg 359 Structural and electrochemical properties of the Sr0.8Ce0.1Fe0.7Co0.3O3-[delta] perovskite as cathode material for ITSOFCs Solid State Ionics, Volume 147, Issues 1-2, 1 AutoPore March 2002, Pages 41-48 M. T. Colomer, B. C. H. Steele and J. A. Kilner 360 Structural changes during the leaching of copper-based raney catalysts Applied Catalysis, Volume 33, Issue 1, 1987, Pages 119-127 A. D. Tomsett, H. E. Curry-Hyde, M. S. AutoPore Wainwright, D. J. Young and A. J. Bridgewater 361 Structural characterization of lignite coal and char with CaCl2 Fuel Processing Technology, Volume 15, January 1987, Pages 397-409 W. P. Pan and M. A. Serageldin AutoPore

362 Structural Control in Porous Cross-Linked Poly (methacrylate) Monoliths Using Supercritical Carbon …; AK Hebb, K Senoo, R Bhat, AI Cooper, Electrophoresis, 2001 AutoPore 363 Structural features and adsorption behaviour of mesoporous silica particles formed from droplets generated in a spraying chamber Microporous and Mesoporous Materials, AutoPore Volume 72, Issues 1-3, 8 July 2004, Pages 175-183 Nina Andersson, Peter C. A. Alberi

364 Structure changes of coal reject char during pyrolysis at low heating rates Fuel Processing Technology, Volume 28, Issue 3, September 1991, Pages 247-258 G. Q. Lu and D. D. Do AutoPore

365 Structure sensitivity of ammonia synthesis over promoted ruthenium catalysts supported on graphitised carbon; Rarog-Pilecka, W. / Miskiewicz, E. / Szmigiel, D. / Kowalczyk, Z., Journal of Catalysis, Apr 2005 AutoPore 366 Studies of the surface area and porosity of activated carbons prepared from rice husks Carbon, Volume 38, Issue 14, 2000, Pages 1943-1945 Nevin Yalin and Vahdettin Sevin AutoPore

367 Studies on silica obtained from rice husk Ceramics International, Volume 27, Issue 2, AutoPore 2001, Pages 219-224 N. Yalin and V. Sevin 368 Study of pore size distribution of slate ceramic pieces produced by slip casting of waste powders; Mansur, A.A.P. / Peres, A.E.C. / Palhares, L. / Mansur, H.S., Engineering, Apr 2006 AutoPore 369 Study of the chloride diffusion in mortar: A new method of determining diffusion coefficients based on impedance...; Diaz, B. / Novoa, X.R. / Perez, M.C., Cement and Concrete Composites, Mar 2006 AutoPore 370 Study of the cracking reaction of linear and branched hexanes under protolytic conditions by non-stationary kinetics Chemical Engineering Journal, Volume 90, Issues 1-2, 28 AutoPore November 2002, Pages 139-147 V. Fierro, Y. Schuurman, C. Mirodatos, J. L. Dupl

371 Study of the textural changes occurring during a solid state polymorphic transformation induced by temperature and relative humidity Colloids and Surfaces A: Physicochemical AutoPore and Engineering Aspects, Volumes 187-188, 31 August 2001, Pages 337-347 M. S

372 SULFUR DIOXIDE ADSORPTION ISOTHERMS AND BREAKTHROUGH ANALYSIS ON MOLECULAR SIEVE 5A ZEOLITE; TPH KOPAÇ, SPH KOCABAS, Chemical Engineering Communications, 2003 PoreSizer

Mercury Porosimeter References, Page 674 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

373 Supercritical carbon dioxide extraction of pelletized Jalapeno peppers; JM del Valle, M Jimenez, P Napolitano, C Zetzl, G …, Journal of the Science of Food and Agriculture, 2003 PoreSizer 374 Supercritical carbon dioxide extraction of red pepper (Capsicum annuum L.) oleoresin Journal of Food Engineering, Volume 65, Issue 1, November 2004, Pages 55-66 Edgar AutoPore Uquiche, Jos M. del Valle and Jaime Ortiz 375 Surface modification on poly (EGDMA-co-HEMA) synthetic matrices to be used as specific adsorbents; Gomez, C.G. / Alvarez Igarzabal, C.I. / Strumia, M.C., Polymer, Aug 2005 AutoPore 376 Synthesis and Application of Spherical Macroporous Epoxy–Polyamide Chelating Resin for …; D YANG, X CHANG, Y LIU, S WANG, Journal of Applied Polymer Science, 2005 PoreSizer Synthesis and characterisation of a vanadium-based 'chemical valve' membrane 377 AutoPore + ASAP Separation and Purification Technology, Volume 25, Issues 1-3, 1 October 2001, Pages 20** 11-24 A. Julbe, D. Farrusseng and C. Guizard 378 Synthesis and characterization of a biospecific adsorbent containing bovine serum albumin as a ligand and its use for bilirubin retention Journal of Biochemical and Biophysical AutoPore Methods, Volume 49, Issues 1-3, 30 October 2001, Pages 649-656 Cecilia Al

379 Synthesis and characterization of new injectable and degradable dextran-based hydrogels; Maia, J. / Ferreira, L. / Carvalho, R. / Ramos, M.A. / Gil, M.H., Polymer, Nov 2005 PoreSizer 380 Synthesis and Efficiency of a Spherical Macroporous Epoxy-Polyamide Chelating Resin for …; DV Yang, XJV Chang, YWV Liu, SV Wang, Microchimica Acta, 2004 PoreSizer 381 Synthesis of higher alcohols in a slurry reactor with cesium-promoted zinc chromite catalyst in decahydronaphthalene Applied Catalysis A: General, Volume 247, Issue 1, 10 AutoPore + Elzone July 2003, Pages 133-142 Xiaolei Sun and George W. Roberts 382 Synthesis of porous cross-linked polymer monoliths using 1,1,1,2-tetrafluoroethane (R134a) as the porogen Composites Science and Technology, Volume 63, Issue 16, AutoPore + ASAP December 2003, Pages 2379-2387 Andrew K. Hebb, Kazunobu Senoo and Andrew I. 20** Cooper 383 Synthesis of resins with pendently-bound chiral manganese-salen complexes and use as heterogeneous asymmetric epoxidation catalysts Reactive and Functional AutoPore Polymers, Volume 40, Issue 2, 15 May 1999, Pages 155-168 L. Canali, D. C. Sherrington a 384 Synthesis of sodalite/[alpha]Al2O3 composite membranes by microwave heating Separation and Purification Technology, Volume 32, Issues 1-3, 1 July 2003, Pages 139- AutoPore 149 A. Julbe, J. Motuzas, F. Cazevielle, G. Volle and C. Guizard 385 Synthesis, sintering and electrical properties of YNi0.33Mn0.67O3 perovskite prepared by a polymerized method Journal of the European Ceramic Society, Volume 23, Issue 5, AutoPore April 2003, Pages 729-736 Carlos Moure, Dionisio Gutierrez, Jesus Tartaj and Ped

386 Tape casting using UV curable binders Journal of the European Ceramic Society, Volume 17, Issue 6, 1997, Pages 765-771 T. Chartier, R. Penarroya, C. Pagnoux and J. F. AutoPore Baumard 387 Temperature dependence of the gelation of silicon alkoxides Journal of Non-Crystalline Solids, Volume 99, Issue 1, January 1988, Pages 129-139 M. W. Colby, A. Osaka and J. AutoPore D. Mackenzie 388 The effect of compressive stress on thermal and hygric properties of Portland cement mortar in wide temperature and moisture ranges Cement and Concrete Research, Volume AutoPore 30, Issue 8, August 2000, Pages 1267-1276 R. Cern, J. Madera, J. Podebradsk, J. To

389 The effect of different diluents on the formation of N-vinylcarbazole-divinylbenzene copolymer beads European Polymer Journal, Volume 35, Issue 10, October 1999, Pages AutoPore 1799-1811 M. A. Hamid, R. Naheed, M. Fuzail and E. Rehman

Mercury Porosimeter References, Page 675 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

390 The effect of different slurry compositions and solvents upon the properties of ZSM5- washcoated cordierite honeycombs...; Zamaro, J.M. / Ulla, M.A. / Miro, E.E., Catalysis Today, Oct 2005 AutoPore 391 The effects of atmosphere on the thermal debinding of injection moulded Si3N4 components Ceramics International, Volume 24, Issue 2, 1998, Pages 99-104 Ding-Fwu AutoPore LiiJow-Lay Huang, Cheng-Hong Lin and Horng-Hwa Lu 392 The effects of the alternate freezing and thawing cycles on the pore structure of cementitious composites modified by MHEC and PVA Building and Environment, AutoPore Volume 32, Issue 6, November 1997, Pages 509-512 Agnieszka J. Klemm and Piotr Klemm 393 The effects on cement paste of treatment with an extended set control admixture Cement and Concrete Research, Volume 21, Issue 5, September 1991, Pages 750-756 Ephraim AutoPore SenbettaW. L. Dolch 394 The fabrication and characterisation of low-k cordierite-based glass-ceramics by aqueous tape casting; Mei, S. / Yang, J. / Ferreira, J.M.F., Journal of the European Ceramic PoreSizer Society, Jan 2004 395 The failure analyses on ZnO varistors used in high tension devices; MA RAMIREZ, PR BUENO, WC RIBEIRO, JA VARELA, JMV …, JOURNAL OF MATERIALS SCIENCE, 2005 PoreSizer 396 The influence of microcrystalline cellulose grade on shape and shape distributions of pellets …; OMY Koo, PWS Heng, Chem Pharm Bull, 2001 PoreSizer 397 The influence of particles of a minor component on the matrix strength of sodium chloride European Journal of Pharmaceutical Sciences, Volume 16, Issues 4-5, September 2002, AutoPore Pages 229-235 B. van Veen, K. van der Voort Maarschalk, G. K. Bolhuis, M. Gon

398 The influence of sulphur on the processing of zirconia based ceramics Journal of the European Ceramic Society, Volume 22, Issue 16, December 2002, Pages 2813-2820 AutoPore Dolores R. R. Lazar, Cristiane A. B. Menezes, Valter Ussui, Ana Helena A. Bressiani and

399 The microstructure and mechanical properties of sintered celsian and strontium-celsian glass-ceramics Materials Research Bulletin, Volume 30, Issue 1, January 1995, Pages 27- Accupyc + AutoPore 41 Luisa Barbeeri, Anna Bomartini Corradi, Cristina Leonelli, Tiziano Manfred

400 The microstructure-mechanical properties relationships of BaTiO3 Ceramics International, Volume 25, Issue 1, January 1999, Pages 35-40 W. H. Tuan and S. K. Lin AutoPore

401 The pore solution phase of carbonated cement pastes; Anstice, D.J. / Page, C.L. / Page, M.M., Cement and Concrete Research, Feb 2005 PoreSizer 402 The properties of heteropoly acids and the conversion of methanol to hydrocarbons Journal of Catalysis, Volume 77, Issue 2, October 1982, Pages 473-484 H. Hayashi and J. AutoPore B. Moffat 403 The sensing behavior of SnO2-based thick-film gas sensors at a low concentration of chemical agent simulants; Lee, W.S. / Lee, S.C. / Lee, S.J. / Lee, D.D. / Huh, J.S. / Jun, H.K. / Kim, J.C., Sensors & Actuators: B. Chemical, Jul 2005 AutoPore 404 The sorption of lysozyme and ribonuclease onto ferromagnetic nickel powder 1. Adsorption of single components Colloids and Surfaces B: Biointerfaces, Volume 5, AutoPore Issues 1-2, 25 September 1995, Pages 25-34 Hwai-Shen Liu, Yu-Chi Wang and Wen-Yih Chen 405 The study of combustion synthesis of fine-particle ?-lithium aluminate; WK Lin, XK Bai, YK Ling, JK Yang, WK Ma, Journal of Materials Science, 2003 AutoPore 406 The synthesis and microstructure of morph-genetic TiC/C ceramics Carbon, Volume 42, Issue 1, 2004, Pages 177-182 Binghe Sun, Tongxiang Fan, Di Zhang and Toshihiro Okabe AutoPore

Mercury Porosimeter References, Page 676 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

407 The use of mercury porosimetry in assessing the effect of different binders on the pore structure and bonding properties of tablets European Journal of Pharmaceutics and Accupyc + AutoPore Biopharmaceutics, Volume 52, Issue 2, September 2001, Pages 237-247 Sofia Mattsso

408 Thermal and hygric properties of Portland cement mortar after high-temperature exposure combined with compressive stress Cement and Concrete Research, Volume 33, Issue 9, AutoPore September 2003, Pages 1347-1355 R. Cern, M. Totov, J. Podebradsk, J. Toman, J. D

409 Thermal behaviour of nickel/metal hydride batteries during charge and discharge Journal of Power Sources, Volume 74, Issue 2, 1 August 1998, Pages 202-210 M. S. Wu, Y. Y. AutoPore Wang and C. C. Wan 410 Thermal pyrolysis characteristics of polymer flocculated waste activated sludge Water Research, Volume 35, Issue 1, January 2001, Pages 49-56 C. P. Chu, D. J. Lee and C. Y. AutoPore Chang 411 Thermal spraying of Ti---6Al---4V/hydroxyapatite composites coatings: powder processing and post-spray treatment Journal of Materials Processing Technology, Volume AutoPore 65, Issues 1-3, March 1997, Pages 73-79 C. S. Yip, K. A. Khor, N. L. Loh and P. Cheang

412 Thermal stability of [gamma]-Al2O3/[alpha]-Al2O3 mesoporous membranes Journal of Membrane Science, Volume 147, Issue 2, 2 September 1998, Pages 173-185 D. Lafarga, AutoPore A. Lafuente, M. Menndez and J. Santamara Thermogravimetric study of promoted hydrated lime sorbents for flue gas clean up 413 SediGraph + Thermochimica Acta, Volume 127, 16 May 1988, Pages 57-71 Richard A. Diffenbach, AutoPore Sheila W. Hedges and S. Friedman 414 Thick film cermet of ZrO2-Y2O3-TiO2/Ni: anodic polarization study Journal of the European Ceramic Society, Volume 19, Issue 2, February 1999, Pages 143-148 M. T. AutoPore Colomer and J. R. Jurado 415 Thick-film nickel-metal-hydride battery based on porous ceramic substrates Journal of Power Sources, Volume 117, Issues 1-2, 15 May 2003, Pages 203-211 Jing-Shan Do, Sen- AutoPore + Gemini Hao Yu and Suh-Fen Cheng 416 Three-dimensional fibroin/collagen scaffolds derived from aqueous solution and the use for HepG2 culture; Lv, Q. / Feng, Q. / Hu, K. / Cui, F., Polymer, Dec 2005 AutoPore 417 Three-dimensional, bioactive, biodegradable, polymer-bioactive glass composite scaffolds with …; HH Lu, SF El-Amin, KD Scott, CT Laurencin, Journal of Biomedical Materials Research, 2003 AutoPore 418 Towards a better understanding of tetrachloroethene entry pressure in the matrix of Permo- Triassic sandstones Journal of Contaminant Hydrology, Volume 59, Issues 3-4, December AutoPore 2002, Pages 247-265 Daren C. Gooddy, John P. Bloomfield, Gavin Harrold and

419 Towards biomimetic scaffolds: Anhydrous scaffold fabrication from biodegradable amine- reactive diblock copolymers Biomaterials, Volume 24, Issue 24, November 2003, Pages AutoPore 4459-4473 Michael Hacker, Jrg Tessmar, Markus Neubauer, Andrea Blaimer, Torsten Bl

420 Ultrafine porous fibers electrospun from cellulose triacetate; Han, S.O. / Son, W.K. / AutoPore + ASAP Youk, J.H. / Lee, T.S. / Park, W.H., Materials Letters, Oct 2005 2405 421 Use of HMDS/hexane double layers for obtaining low cost selective membrane; MLPJ da Silva, NRJ Demarquette, IHJ Tan, Cellulose, 2003 AutoPore Void Space Structure of Compressible Polymer Spheres and Consolidated Calcium 422 PoreSizer + Carbonate Paper-Coating ; Gane: Patrick A. Gane, - John P. Kettle, - G. SediGraph Peter Matthews,* and Cathy J. Ridgway , \ Ind. Eng. Chem. Res. (1996), 35, 1753-1764 423 Water as foaming agent for open cell polyurethane structures; HT Haugen, VT Ried, MT Brunner, JT Will, ET …, Journal of Materials Science: Materials in Medicine, 2004 AutoPore 424 Weathering traces in ancient bricks from historic buildings; Lopez-Arce, P. / Garcia- Guinea, J., Building and Environment, Jul 2005 AutoPore

Mercury Porosimeter References, Page 677 of 804 Micromeritics Product Citations AutoPore and PoreSizer Mercury Intrusion Porosimeters

425 Welded tuff porosity characterization using mercury intrusion, nitrogen and ethylene glycol monoethyl ether sorption and epifluorescence microscopy Applied , AutoPore + Gemini Volume 9, Issue 5, September 1994, Pages 491-499 Michael M. ReddyHans C. Claassen

426 Wustite as a new precursor of industrial ammonia synthesis catalysts Applied Catalysis A: General, Volume 251, Issue 1, 25 September 2003, Pages 121-129 N. Pernicone, F. AutoPore Ferrero, I. Rossetti, L. Forni, P. Canton, P. Riello, G. Fagherazzi, M. Signoret

Mercury Porosimeter References, Page 678 of 804