Daido Kogyo Co., Ltd. ISO 14001:2015
This is to certify that the management system of: Certificate Number: 13359-B Initial Certification Date: Daido Kogyo Co., Ltd. 01 February 2002 Date of Certification Decision: Main Site: I-197, Kumasaka-Machi, Kaga-Shi, Ishikawa Pref., Japan 11 November 2020 See appendix for additional sites and additional site scopes Issuing Date: has been registered by Intertek as conforming to the requirements of: 11 November 2020 Valid Until: ISO 14001:2015 31 January 2023
The management system is applicable to:
Design, development and manufacture of chains and other transmission parts for industrial machines and conveyor machines, and rims wheels and related parts for automobile, motorcycle and
agriculture machine, and conveyor systems, machine and equipment for electric, electronic, communication device, and stair lifts
Calin Moldovean President, Business Assurance
Intertek Certification Limited, 10A Victory Park, Victory Road, Derby DE24 8ZF, United Kingdom
Intertek Certification Limited is a UKAS accredited body under schedule of accreditation no. 014.
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may be confirmed via email at [email protected] or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon request.
Page 1 of 3
This appendix identifies the locations covered by the management system of:
Daido Kogyo Co., Ltd. This appendix is linked to the Main Certificate # 13359-B and cannot be shown nor reproduced without it. Fukuda Factory So-20, Daishoji Shimofukuda-Machi, Kaga-Shi, Ishikawa Pref., Japan 【Scope】Manufacture of chains for industrial machines, automobile, motorcycle and other transmission parts
Iburibashi Factory I-22-1 Iburihashi-Machi, Kaga-Shi, Ishikawa Pref., Japan 【Scope】Manufacture of rims for motorcycle
Tokyo Office 3-5-4 Nihonbashiningyo-Cho, Chuo-Ku, Tokyo, Japan Tochigi Branch 4-2-20 Higashishukugo, Utsunomiya-Shi, Tochigi Pref., Japan Hamamatsu Branch 1130-2 Mikatahara-Cho, Kita-Ku, Hamamatsu-Shi, Shizuoka Pref., Japan Nagoya Branch 4-9-7 Meieki Minami, Nakamura-Ku, Nagoya-Shi, Aichi Pref., Japan Osaka Branch 2-12-12 Minamisenba, Chuo-Ku, Osaka-Shi, Osaka, Japan 【Scope】Contract review, storage of products
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may be confirmed via email at [email protected] or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon request.
Page 2 of 3
This appendix identifies the locations covered by the management system of:
Daido Kogyo Co., Ltd. This appendix is linked to the Main Certificate # 13359-B and cannot be shown nor reproduced without it. Kumamoto Branch 1074-1 Kyokushi Kawabe, Kikuchi-Shi, Kumamoto Pref., Japan Sapporo Branch 18-1-3 Kita18-Jo Higashi, Higashi-Ku, Sapporo-Shi, Hokkaido, Japan Nishinihon Branch 1-3-6 Hakataeki Minami, Hakata-Ku, Fukuoka-Shi, Fukuoka Pref., Japan 【Scope】Contract review, storage of products
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may be confirmed via email at [email protected] or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon request.
Page 3 of 3