DOCSLIB.ORG

Schedule 3 RT&T Transgressions Model Regulations Ver2 Draft1

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Schedule 3 RT&T Transgressions Model Regulations Ver2 Draft1 SCHEDULE 3 Road Traffic Transport Transgressions Model Regulations Classification of Item Short statutory offence, major Model Law Charge Code Short charge wording Severity Demerit Points Penalty (USD) Model Law Section number reference violation and Document minor violation SCHEDULE 1: OFFENCES Cross-Border Road As owner or operator of a specified vehicle requiring an operator card, failed to register as operator of such 1 1 10 5 $0.00 Transport Model 7 vehicle. Law Cross-Border Road Transport Model 2 Operator allowing driver to drive while driving licence or PrDP is suspended. 1 10 5 $0.00 Law & Road Traffic Model Law Cross-Border Road Transport Model 3 Operator allowing driver to drive while driving licence or PrDP is cancelled. 1 10 5 $0.00 Law &n Road Traffic Model Law Model Law on Road Traffic and 4 Causing death or serious injury through inconsiderate driving. 1 10 5 $0.00 5 Transport Transgressions Model Law on Road Traffic and 5 Causing death or serous injury through negligent driving. 1 10 5 $0.00 5 Transport Transgressions Model Law on Road Traffic and 6 Causing death or injury through reckless driving. 1 10 5 $0.00 5 Transport Transgressions Model Law on Road Causing death or serious injury through driving with a blood, or breath level of alcohol the level determined Traffic and 7 1 10 5 $0.00 5 in terms of section X of the Road Traffic Act. Transport Transgressions Model Law on Road Causing death or serious injury through driving with a blood or urine level of a prohibited drug exceeding 8 1 10 5 $0.00 Traffic and 5 the level determined in yerms of section X of the Road Traffic Act. Transport Road Traffic Model 9 Reckless Driving through exceeding the speed limit by more than 50% above the speed limit. 1 10 5 $0.00 Law Road Traffic Model 10 Reckless Driving. 1 10 5 $0.00 Law Road Traffic Model 11 Person drove a motor vehicle while driving licence cancelled. 1 10 5 $0.00 Law Person drove a motor vehicle of a class for which a Professional Driving Permit is required while his or her Road Traffic Model 12 1 10 5 $0.00 Professional Driving Permit is cancelled. Law Driving a motor vehice of which the licence or the registration was cancelled in terms of the demerit points Road Traffic Model 13 1 10 5 $0.00 system. Law Applied for a learner's or driving licence, and wilfully failed to disclose any disqualification to which he or she Road Traffic Model 14 1 10 5 $0.00 33 was subject. Law Failed to stop vehicle at the scene of an accident in which he or she was involved where someone was Road Traffic Model 15 1 10 5 $0.00 35 injured or killed. Law Failed to ascertain if someone was killed or injured or the extent of injuries at the scene of an accident in Road Traffic Model 16 1 10 5 $0.00 35 which he or she was involved. Law Failed to assist the injured or ascertain if someone was killed or injured at the scene of an accident in which Road Traffic Model 17 1 10 5 $0.00 35 he or she was involved. Law Failed to ascertain the damage sustained in an accident in which he or she was involved where someone Road Traffic Model 18 1 10 5 $0.00 35 was killed or injured. Law Failed to give his or her full particulars (name etc.) at the scene of an accident in which he or she was Road Traffic Model 19 1 10 5 $0.00 35 involved where someone was killed or injured. Law 01/11/2018 Ver 2 Draft 1 Page 1 of 49 SCHEDULE 3 Road Traffic Transport Transgressions Model Regulations Classification of Item Short statutory offence, major Model Law Charge Code Short charge wording Severity Demerit Points Penalty (USD) Model Law Section number reference violation and Document minor violation Failed to report the accident within 24 hours and give his or her full particulars after an accident in which he Road Traffic Model 20 1 10 5 $0.00 35 or she was involved where someone was killed or injured. Law Illegally moved a vehicle not obstructing traffic from the position in which it came to rest at the scene of an Road Traffic Model 21 1 10 5 $0.00 35 accident where someone was killed or injured. Law Removed a vehicle involved in an accident from the position in which it came to rest in an urban area in Road Traffic Model 22 which another person was killed or injured, and where the accident did not cause complete obstruction, 1 10 5 $0.00 35 Law whilst not authorized to do so by a traffic officer. Road Traffic Model 23 Being the holder of a professional driving permit, allowed another person to use such permit. 1 10 5 $0.00 139 Regulations Cross-Border Road 24 As owner or operator of perscribed vehicle, failed to register as operator of such vehicle. 1 10 5 $0.00 Transport Model Law Road Traffic Model 25 Operated a driving licence testing centre which was not registered and graded. 1 10 5 $0.00 Law Wilfully or negligently and contrary to this Section (a) issued a driving licence (b) authorized the issue Road Traffic Model 26 1 10 5 $0.00 thereof or (c) endorsed it or failed to endorse it. Law Employed or permitted another person to drive such vehicle while the said driver did not have driving Road Traffic Model 27 1 10 5 $0.00 licence issued under the regulations to drive such vehicle. Law Road Traffic and When charged with an offence in terms the regulations, refused or failed to produce every licence and 28 1 10 5 $0.00 Transport permit to the court at the time of the hearing. Transgressions Road Traffic and As holder of a suspended or cancelled professional driving permit, failed to submit the card on which the 29 1 10 5 $0.00 Transport permit appears, to the registrar or clerk of the court. Transgressions Road Traffic Model 30 Operated an unregistered and non-graded testing station. 1 10 5 $0.00 Law Falsified, counterfeited, replaced, altered, defaced, mutilated or added something to a licence number or Road Traffic Model 31 1 10 5 $0.00 mark issued by a competent authority outside the Republic. Law Possessed a licence number or mark or similar number, which was falsified or counterfeited or so replaced, Road Traffic Model 32 1 10 5 $0.00 altered, defaced or mutilated or to which something was added. Law Falsified or counterfeited or, substituted, altered, defaced or mutilated or added something to a certificate, Road Traffic Model 33 1 10 5 $0.00 licence or other document issued or recognized in terms the regulations. Law Possessed a certificate, licence or other document issued or recognized in terms of the regulations, which Road Traffic Model 34 1 10 5 $0.00 was falsified, counterfeited, substituted, altered, defaced or mutilated. Law Cross Border Road Used a certificate, licence or other document issued or recognized in terms of the regulations of which he or 35 1 10 5 $0.00 Transport Model she was not the holder. Law Permitted a certificate, licence or other document issued or recognized in terms of this regulations, of which Road Traffic Model 36 1 10 5 $0.00 he or she was the holder, to be used by another person. Law With intend to deceive, falsified, replaced, altered, defaced, mutilated, added anything to or removed Road Traffic Model 37 1 10 5 $0.00 anything from or in any way tampered with the engine or chassis number. Law Possessed a vehicle of which the engine or chassis number was falsified, replaced, altered, defaced, Road Traffic Model 38 1 10 5 $0.00 mutilated, or to which anything was added or from which anything was removed or was tampered. Law Road Traffic Model 39 Person drove while driving licence suspended 1 10 5 $0.00 Law Road Traffic and Person drove motor vehicle of a class for which a Professional Driving Permit is required while his or her 40 1 10 5 $0.00 Transport Professional Driving Permit is suspended Transgressions SCHEDULE 2: MAJOR VIOLATIONS As operator of a vehicle, failed to keep the issued operator card safe, protect it from theft, report when lost, Cross-Border Road 41 stolen or was destroyed or did not notify the nearest [Insert reference to Country Police] station within 24 2 5 1 $45.00 Transport Model 6 hrs. as prescribed. Law Cross-Border Road As operator of a vehicle, failed to exercise proper control over the driver of the vehicle to ensure the 42 2 5 1 $45.00 Transport Model 8 compliance of the driver with all the relevant provisions of the regulations. Law 01/11/2018 Ver 2 Draft 1 Page 2 of 49 SCHEDULE 3 Road Traffic Transport Transgressions Model Regulations Classification of Item Short statutory offence, major Model Law Charge Code Short charge wording Severity Demerit Points Penalty (USD) Model Law Section number reference violation and Document minor violation Cross-Border Road Operator of a vehicle failed to ensure that such vehicle complied with the fitness requirements contemplated 43 2 6 2 $60.00 Transport Model 7 in the regulations. Law Cross-Border Road While he or she was the operator of a vehicle, failed to conduct his or her operations with due care to the 44 2 9 5 $90.00 Transport Model 9 safety of the public.
Load more

Recommended publications
  • Speed33™ - Frequently Asked Questions (FAQ)
    Speed33™ - Frequently Asked Questions (FAQ) Q. How much is the body, and how do I reserve one? A. The base body package is $33,500. A 50% deposit will hold your place in the production order, with a confirmation letter from American Speed with the assigned body number. Deposits can be made by check, wire transfer or credit card. Call us directly at 734.451.1141 for phone-in orders. Q. How long do I have to wait to get one? A. We build all orders to your specifications, with only the most common body configuration in stock. We have the process down to a well proven systems, so the average lead-time is about 8 to 10 weeks. No waiting years here, we want you driving before then! Q. What does the Speed33™ body come with? A. The body is a complete shell from firewall through decklid including full convertible top in a choice of three standard colors (black, beige and navy) with full weather seal package; doors hung on hidden hinges with latches and loaded with power side windows (curved tempered glass); full front windshield assembly with curved laminated glass, stainless steel frame and cast stainless windshield stanchions; heavy gauge floor with transmission cutout; ’32 design inspired removable instrument panel; and optional chassis wedges for use in stock-height/full-fendered builds. Q. Do you have a starter Speed33 kit? A. Yes, we do now! You can buy the all new stamped steel body without the convertible top, front windshield and glass, and side glass with motors for just $26,000! Those items are all available separately for later purchase and install.
    [Show full text]
  • State of Oklahoma
    ENROLLED SENATE BILL NO. 633 By: Smith of the Senate and McCarter of the House An Act relating to motor vehicles; amending 47 O.S. 2001, Sections 1-104, 1-134, as amended by Section 2, Chapter 58, O.S.L. 2002, 1-136 and 1-186, as amended by Section 3, Chapter 58, O.S.L. 2002 (47 O.S. Supp. 2002, Sections 1-134 and 1-186), which relate to definitions; modifying and adding definitions; amending 47 O.S. 2001, Sections 11-705 and 11-705.1, which relate to school and church buses; eliminating requirement that buses bear certain words; modifying citation; amending 47 O.S. 2001, Sections 11-805 and 11-808, which relate to speed limits on motor-driven cycles; specifying maximum speeds; amending 47 O.S. 2001, Section 11-1103, which relates to riding on motorcycles; specifying conditions for transporting passenger; prohibiting certain conduct by drivers and riders of motorcycles; amending 47 O.S. 2001, Section 11-1205, which relates to riding on roadways and bicycle paths; prohibiting bicycle from passing other vehicles between lanes; amending 47 O.S. 2001, Sections 12-101 and 12-102, which relate to equipment on vehicles; stating exceptions; excepting vehicle lawfully manufactured without equipment; exempting classic or antique vehicles; authorizing promulgation of rules; defining terms; specifying color for school buses; prohibiting sale of vehicle not in compliance with law; providing for liberal construction and severability; amending 47 O.S. 2001, Sections 12-201, 12-202, 12-203, 12-204, 12-205, 12-206, 12-208, 12- 211, 12-213, 12-214, 12-216,
    [Show full text]
  • AC 150/5220-10E, Guide Specification for Aircraft Rescue
    Advisory U.S. Department of Transportation Federal Aviation Administration Circular Subject: Guide Specification for Date: 6/01/2011 AC No.: 150/5220-10E Aircraft Rescue and Fire Fighting Initiated by: AAS-100 Change: (ARFF) Vehicles 1. PURPOSE. This advisory circular (AC) provides an interactive specification that airports can use in procuring Aircraft Rescue and Fire Fighting (ARFF) vehicles. 2. SCOPE. The three main phases of the ARFF vehicle procurement process are presented in this AC, including the: a. Description of the vehicle selection process; b. Selection of vehicle requirements; and c. Production of a formal specification. This AC contains information based on the minimum ARFF vehicle requirements established by Title 14 Code of Federal Regulations (CFR) Part 139, Certification of Airports. The AC is also based on the FAA additions, exemptions, or amendments made to National Fire Protection Association (NFPA) 414, Standard for Aircraft Rescue and Fire Fighting Vehicles (2007 Edition) (as referenced in Appendix A of this document) and NFPA 1901, Standard for Automotive Fire Apparatus (2009 Edition). Only ARFF vehicles and associated vehicle training equipment are discussed in this AC. Other related items, such as the communications equipment, tools, and clothing used in fire fighting, are not covered. However, that information can be found in other guidance material, such as AC 150/5210-14, Aircraft Rescue and Fire Fighting Equipment, Tools, and Clothing. 3. APPLICATION. The Federal Aviation Administration (FAA) recommends the guidance and specifications in this AC for procuring ARFF vehicles. In general, use of this AC is not mandatory. However, use of this AC is mandatory for the acquisition of ARFF vehicles through the Airport Improvement Program (AIP) or Passenger Facility Charge (PFC) Program.
    [Show full text]
  • Request for Proposals
    REQUEST FOR PROPOSALS ONE (1) 1500 GPM/750 GALLON CUSTOM PUMPER 1500 GPM/750T Custom Pumper Page 1 Bidder Complies YES NO GENERAL INFORMATION The proposed apparatus will be constructed to withstand the severe and continuous use encountered during emergency firefighting services. The apparatus will be of the latest type, carefully designed and constructed with due consideration to the nature and distribution of the load to be sustained. This proposal details the general design criteria of cab and chassis components, aerial device (if applicable), fire pump and related components (if applicable), water tank (if applicable), fire body, electrical components, painting, and equipment. All items of these proposal specifications will fully conform possible with the National Fire Protection Association Pamphlet No. 1901, latest edition, except as noted in the Statement-of- Exceptions. The Bidder will furnish satisfactory evidence of our ability to construct, supply service parts and technical assistance for the apparatus specified. TABLE OF CONTENTS-NO EXCEPTIONS To provide for ease of bid comparison and to clearly locate all proposed items and exceptions, the Department has provided a Table of Contents at the beginning of the proposed bid specifications. All Bidders shall include a table of contents with their bid for each Apparatus to be bid. For ease of bid comparison and evaluation for the Fire Department there shall be no exception to this requirement. Failure to comply with this requirement will render the bid as non- responsive and shall be rejected. SPECIFICATION DOCMENT IN SAME SEQUENCE-NO EXCEPTIONS For ease of accurate evaluation and cross-referencing information from each bidder, the Department requires that each bid specification follows in this exact order.
    [Show full text]
  • Signal Hill Fire Protection Association Inc. Request for Proposals 1500 Gallon Per Minute Triple Combination Pumper with Related Components
    Signal Hill Fire Protection Association Inc. Request for Proposals 1500 Gallon per Minute Triple Combination Pumper With Related Components. These specifications contain the major cab, chassis and drive line components, pump and plumbing as well as desired compartment configurations. The Department recognizes and appreciates that each fire apparatus manufacturer has its own, unique construction methodologies along with their standard features. -- i.e. it would be assumed that the drive train components would include an engine, transmission, drive shaft, pump transmission, universal joints, carrier bearings and differential. Or, that chassis frame rails would include firmly secured cross members. Or, that on horizontal surfaces were firefighters would step, tailboard, running boards, steps would have non-slip surface of aluminum tread plate or the like. The apparatus shall conform to nationally recognized standards/regulations for fire pumper apparatus, including -- but not limited to; the National Fire Protection Association, the National Highway Traffic Administration, or the United States Department of Transpiration, unless otherwise specified within these documents. Specific reference is made to National Fire Protection Association Standard 1901, Standard for Automotive Fire Apparatus, 2009 edition. Minor details of the construction of and materials, where not otherwise specified, shall at the discretion of the bidder, who shall be solely responsible for the design and construction of all features. The Department expects that each bidder will submit with their bid, detailed drawings along with specific details as they relate to the major components and the completed apparatus. Included with the bid submission shall be a Vertical Center of Gravity & Weight Distribution analysis, etc. Unless otherwise stipulated, equivalencies to these specifications are permitted, provided that information is submitted that clearly demonstrates that any substitution is equal to or better than that specified.
    [Show full text]
  • Custom Top Mount Rescue/Pumper Specifications
    CITY OF DAYTONA BEACH SHORES PUBLIC SAFETY CUSTOM TOP MOUNT RESCUE/PUMPER SPECIFICATIONS REDUCED PROFILE RESCUE PUMP 1500GPM 530 WATER MAY 2019 CUSTOM TOP MOUNT RESCUE/PUMPER TESTING COMPLIANCE STANDARD Hose Bed Capacity The hose bed shall have the capacity to store the following hose from the driver side to the officer side. Overall Height Restriction The apparatus shall have no overall height restrictions. Overall Length Restriction The unit has no overall length restrictions. NFPA Compliance The manufacture supplied components of the apparatus shall be compliant with NFPA 1901, 2016 edition Equipment Capacity Equipment allowance on the apparatus shall be 2500 lbs. This allowance is in addition to the weight of the hoses and ground ladders listed in the shop order as applicable. BUMPERS Bumper Extension The bumper extension shall be approximately 28” from the face of the cab as required. 1 DAYTONA BEACH SHORES PUBLIC SAFETY CUSTOM TOP MOUNT RESCUE/PUMPER Bumper A heavy duty 12" high steel channel type front bumper shall be provided. The front corners of the bumper shall be angled to reduce swing clearance. The bumper shall be painted job color. Bumper Gravel Shield The extended front bumper gravel shield shall be made of 3/16” (.188”) aluminum treadplate material. The shield shall fully cover the top flange of the heavy duty front bumper. 2 DAYTONA BEACH SHORES PUBLIC SAFETY CUSTOM TOP MOUNT RESCUE/PUMPER Frame Extension The front bumper frame extension shall be a "drop style" in place of standard. The extensions shall be constructed from .75" thick A-36 steel and have integral tow eyes below the bumper.
    [Show full text]
  • Town of Sunderland INVITATION for BID for Fire Apparatus
    Town of Sunderland INVITATION FOR BID FOR Fire Apparatus Sealed bids for delivery of FIRE APPARATUS, as detailed in attached Specifications, or equal, will be received at the Franklin Regional Council of Governments, J.W. Olver Transit Center, 12 Olive Street, Suite 2, Greenfield, MA 01301 on or before FEBRUARY 14, 2017 AT 2PM at which time they will be opened and publicly read by the FRCOG Chief Procurement Officer. The Chief Procurement Officer’s clock shall be the sole determining factor of time. The Town of Sunderland is the awarding authority and reserves the right to determine what is “equal” if “or equal” components or services are proposed. In the event the FRCOG office is officially closed for weather or emergency, the bid will be opened the next open day at the same time. Specifications are available only through the FRCOG bid website: http://frcog.org/bids in order for all recipients to be notified of any addenda or deadline changes. This bid is being undertaken under MGL Chapter 30B. All bidders shall be familiar with the law’s requirements. Any questions pertaining to the bid requirements or documents should be directed, in writing, to Andrea Woods, Chief Procurement Officer, FRCOG. Questions may be emailed to [email protected] or mailed. Written responses will be emailed to all bidders on record as having picked up the IFB through the website. Any addenda must be acknowledged on the Bid Price Form. Failure to do so may result in rejection of bid. If you received this bid form from any other source than FRCOG, you must register to receive any addenda.
    [Show full text]
  • 2020 4Runner
    Doc. 04.116.00 Ver. 1 09/24/19 Southeast Toyota Distributors, LLC Accessory Installation Instructions 2020 4Runner SR5 Step Board Recommended Tool Safety Tools Notes Year & Model: 2020 4Runner Safety Glasses Part Number: 00016-89004, Chrome; 00016-89870, Blk Accessory Code: RB1300, RB1200 Installation Tools Notes PIO / DIO: PIO / DIO Ratchet Socket 12mm, 13mm/Deep Well Business Partner: J50 Torque Wrench 10 ft. lbs. Conflicts Special Chemicals 2020 Limited Models N/A Special Tools Notes Utility Knife General Applicability Fits Models 1. All applicable 2020 4Runner SR5 & Trail team Legends Additional Items Required For Installation Item # Description: 1. Wiping Cloth-Non-Scratch 2. Torque Audit Sheet-PIO Only Note: For PIO Install Using Atlas Copco Torque Management Equipment/See Torque Procedure Page. Sequence of Application Item # Accessory: 1. LED Illumination 2. Step/ Running Board SPECIAL NOTE: Installation Sequences After TMS & Safety mandated preparatory steps have been taken, the installation sequence is the suggested method for completing the accessory installation. In some instances the suggested sequence is written for one associate to install & in others the sequence is given as part of a team accessory installation. Unless otherwise stated in the document, the associates may perform the installation steps in any order to make the installation as efficient as possible while maintaining consistent quality. Southeast Toyota Distributors, LLC Page 1 of 12 TOYOTA 4Runner SR5 Step Board Table of Contents_____________________________________________________________ I. Preparation………………………………………………………………………...1-5 a.) Table of Contents……………………………………………………………………2 b.) Kit/Hardware Bag Contents…………………………………………………………3 c.) Parts for Installation…………………………………………………………………4 d.) Service & Warranty Information……………………………………………………5 II. Procedures a.) Pre-Installation Preparation/ Running Board Installation……………..………......6-7 III.
    [Show full text]
  • Act 300 of 1949 EQUIPMENT 257.683 Driving Or Moving Vehicle in Unsafe
    MICHIGAN VEHICLE CODE (EXCERPT) Act 300 of 1949 EQUIPMENT 257.683 Driving or moving vehicle in unsafe condition; condition and adjustment of parts and equipment; stopping and inspecting vehicle; citation; training requirements as motor carrier enforcement officer; additional parts and accessories; exceptions; violation as civil infraction. Sec. 683. (1) A person shall not drive or move or the owner shall not cause or knowingly permit to be driven or moved on a highway a vehicle or combination of vehicles that is in such an unsafe condition as to endanger a person, or that does not contain those parts or is not at all times equipped with lamps and other equipment in proper condition and adjustment as required in sections 683 to 711, or that is equipped in a manner in violation of sections 683 to 711. A person shall not do an act forbidden or fail to perform an act required under sections 683 to 711. (2) A police officer on reasonable grounds shown may stop a motor vehicle and inspect the motor vehicle, and if a defect in equipment is found, the officer may issue the driver a citation for a violation of a provision of sections 683 to 711. (3) In order to be classified as a motor carrier enforcement officer, a police officer must have training equal to the minimum training requirements, including any annual training updates, established by the department of state police for an officer of the motor carrier division of the department of state police. A police officer who has received training equal to these minimum training requirements before the effective date of this section is considered a motor carrier enforcement officer for purposes of this act.
    [Show full text]
  • Duluth Fire Department Fire Engine Triple Combination Pumper
    DULUTH FIRE DEPARTMENT FIRE ENGINE TRIPLE COMBINATION PUMPER ISSUED FEBRUARY 19, 2016 1 TABLE OF CONTENTS 1.0 LETTER OF EXCEPTIONS 5 2.0 GENERAL REQUIREMENTS 5 3.0 RELIABILITY OF CONTRACTOR: 6 4.0 DESIGN: 6 5.0 SERVICEABILITY: 6 6.0 GENERAL WARRANTY 7 7.0 PRINTED PROPOSALS/BIDS 7 8.0 PROPOSAL SIGNATURES REQUIRED 7 9.0 CHASSIS PREPAYMENT DISCOUNT 7 10.0 DETAILED PROPOSAL SPECIFICATIONS 7 11.0 PROPOSAL PRINT/DRAWING 7 12.0 AWARD OF CONTRACT 8 13.0 INSPECTION TRIPS 8 14.0 ACCEPTANCE TESTS AND REQUIREMENTS 9 15.0 ALTITUDE REQUIREMENTS: 9 16.0 ROADABILTY: 9 17.0 MANUALS/CERTS: 9 18.0 FAILURE TO MEET TESTS: 10 19.0 DELIVERY/CONSTRUCTION: 10 20.0 DELIVERY ENGINEER: 10 21.0 APPARATUS SIZE - CAPACITY – SEATING 10 22.0 CUSTOM STYLE CHASSIS 10 23.0 TRANSMISSION 11 24.0 INDEPENDENT FRONT SUSPENSION AND EQUIPMENT 12 25.0 REAR AXLE, SUSPENSION AND EQUIPMENT 12 26.0 FRONT AND REAR TIRES AND WHEELS 13 27.0 AIR BRAKING SYSTEM 13 2 28.0 FRAME AND WHEELBASE 13 29.0 BUMPER/TOW HOOKS 14 30.0 FUEL TANK 14 31.0 CHASSIS AND CAB EQUIPMENT 14 32.0 CAB EXTERIOR 14 33.0 CAB INTERIOR AND SEATING 15 34.0 NFPA MODIFICATIONS TO CHASSIS: 16 35.0 CHASSIS MODIFICATIONS SPECIFIC FOR PUMPER APPLICATION: 17 36.0 CHASSIS MODIFICATIONS 17 37.0 ON-BOARD BATTERY CHARGER - 40 AMP 20 38.0 DUAL AIR HORNS 20 39.0 FIRE PUMP SYSTEM: 20 40.0 WATEROUS TWO-STAGE 1500 GPM CMU MODEL PUMP 21 41.0 PUMP INTAKES 23 42.0 PUMP DISCHARGES: 24 43.0 PUMP CONTROLS/ACCESS/LIGHTS 27 44.0 PUMP PANEL GAUGES/LABELING 29 45.0 PUMP HEAT PACKAGE: 31 46.0 PUMP FOAM SYSTEM: 31 47.0 APPARATUS BODY AND COMPARTMENTATION:
    [Show full text]
  • Grote: a Worldwide Leader in Vehicle Lighting and Safety Systems
    Lighting Systems Catalog Grote: A Worldwide Leader in Vehicle Lighting and Safety Systems ECHoing OUR GROWING PROPortion OF INTERNATIONAL BUSINESS, GrotE Has transitioned From A NORTH American-based INTERNATIONAL TO A TRUE multi-national ORGANIZation. Grote’s Madison, Indiana facility is our international headquarters, where a large proportion of our strategic lighting development and manufacturing takes place. We are transitioning our non-U.S. facilities to true strategic design and production centers of excellence for the entire enterprise. Grote Europe, Niederwinkling, Germany, is Grote’s European headquarters and is responsible for design and production of lighting safety systems to meet specific European requirements. Grote of Canada, located in Markham, Ontario, is the headquarters for the manufacturing and development of Grote’s Accessory lines. Grote of Canada serves both the original equipment and aftermarket channels for the entire Canadian market, and its new state-of-the-art facility operates at the forefront of industry manufacturing and distribution efficiency. Grote Electronics, located in Waterloo, Canada, is a state-of-the- art, high-volume manufacturing facility dedicated to assembling Grote’s light emitting diode (LED) circuit boards and electronic- based specialty products. Today, we are leading the industry in LED technology, not only for exterior lighting solutions, but for interior designs as well. Grote De Mexico, located in Monterrey, is responsible for development and production of Grote wiring and trailer harnesses, including Grote’s patented ULTRA-BLUE-SEAL® pigtail and harness system. Grote China, located in Shanghai, China is a wholly-owned, foreign enterprise of Grote Industries. Grote’s new facility is the launching pad for our Asian OE business growth.
    [Show full text]
  • RFB202-4 Complete
    To: Parties Interested In RFB2020-4 From: Cindy Clack Date: August 14, 2019 Re: RFB2020-4 – 2019 or 2020 Rescue Pumper RFB2020-4 is attached for your consideration. Anyone accessing this Request for Bid from the Barrow County website www.barrowga.org is responsible to insure the latest documents are in their possession including any addenda. All addenda, questions and answers will be posted on this site. This site should be visited frequently to insure an awareness of any updates. Please insure bids are submitted exactly as specified in the RFB. If you have any questions, please submit them in writing as called for in the RFB. Thank you. Barrow County Board of Commissioners 30 North Broad Street; Winder, GA 30680 www.barrowga.org REQUEST FOR BIDS RFB2020-4 2019 or 2020 RESCUE PUMPER PER SPECIFICATIONS BARROW COUNTY, GEORGIA AUGUST 14, 2019 DATE OF OPENING: SEPTEMBER 12, 2019 1 REQUEST FOR BID RFB2020-4 BARROW COUNTY, GEORGIA Date: August 14, 2019 PURPOSE: The purpose of this request is to provide interested suppliers with the sufficient information to enable them to submit a uniform bid for the County’s review. Also, to set-forth a systematic method that will be fair and impartial to all parties concerned and to generate a response that can be equally evaluated by the County. GENERAL: Barrow County is in the process of securing sealed bids for one (1) Rescue Pumper or Equivalent per attached specifications, graphics (Exhibit A), and loose equipment (Exhibit B) for the Barrow County Emergency Services (Fire Division). Bidder must be an authorized dealer for a minimum of three (3) consecutive years for the fire apparatus of which you are submitting a bid.
    [Show full text]