Floor Gullies and Access Covers Contents

Floor gullies and access covers Contents

Section 1 Introduction 2 Design considerations 3 Installation guidelines 4 Stainless steel gullies 4B Body assemblies 4G Gratings See also section 5; pages 5Bntss, 5Btss, 5Gss and 5Vss 5 Vari-Level 5A Assemblies with typical installations 5B Bodies 5C Membrane clamping collars 5G Gratings 5V Access covers 5X Accessories and adaptors 6 Direct connection 6G Gratings 6V Access covers 7 Uni-Level Gullies for asphalt/composition finished floors 8 Multi-Level Gullies for unfinished floors 9 Side inlets 10 Adaptors 11 Specialised applications 11L Large gullies – hopper, trench and pit drains 11M Non-spark gunmetal gullies for use in metal decks 11O Overflow gully for use in decorative pools/water features 11P Drainage of planting areas and roof gardens 11S 90° gully for use in shower areas etc. 11SF 1 Double-sealed access cover for man-entry 11SF 2-3 Gully assemblies for flexible sheet such a vinyl 11V General purpose access covers WP Non-freeze water points Appendix i Materials care and maintenance Appendix ii Glossary Code index Spec. Code index Wade I.T. and Warranty 1

Introduction . 1 . t i ls i l 2018 n i i s/her i Apr gned to su i ons and ons and i Please contact our . ll meet h uk i . co . ons A.E.L.T.C.C. Wimbledon A.E.L.T.C.C. i nt i llustrat i ces Department for deta cat i i wade ze and style enable the ze and style . i es that w i Products can be des Products ve range of products of products ve range i al, s cal Serv : www Custom-made products i i cular appl i Web Techn part uk . co . . nt i cal manual presents presents cal manual ces of mater i i ﬁer/user to select gull ﬁer/user rements i i ch cho s techn i : sales@wade i l i data from a comprehens a data from wh spec requ Th E-ma ty i cal i ence ence i

. ng i ng i shes i ngs Much . i table for i : +44(0)1787 475579 ors, marble ckel bronze ckel bronze i butable to an butable to i i Fax ble sheet floor ons, n i s attr i ety of floor fin i i shed as a lead shed as a i ngs . i cat i gned to i nage products i ness cable, equally su de var i i i and flex ty areas deas, and to guarantee qual deas, and i i s establ Floral style grat de appl i i ty dra i . : +44(0)1787 475151 es are des es are i ng terrazzo, stone pav th more than fifty years’ exper fifty than th more i i Tel on tment to put technology to pract put technology to tment to i c yet pract i i nclud sed removal of grat sed removal de or outs i i i sed access to a gully i ns i complements a w Aesthet

ndustry, Wade Wade ndustry, ng comm i i nage of secur i

n the deter unauthor and unauthor on-go Dra K29, K35 and K36 ser of the success of the bus of the success fresh use, to generate assured product assured manufacturer of qual manufacturer A UK company w company A UK Introduction i 1 .

2 Introduction commitment toqualityandservice BS ENISO9001underliesour Certification ofcompliancewith Apr i l 2018 Tel : +44(0)1787 475151 Fax : +44(0)1787 475579 m cover ofsta K2307 grat k Dra Cast n Dra areas suchasatshopp Sl i i i xed trafficcond d tchen w i ng accesscoveronav i i nage andserv nage i ckel bronze i E-ma ngs ofsta i nless steelensure watert i i n blockpav th v i l : sales@wade i t i i s part ons encountered i i nyl floor nless steelandRS213access i ng centres i cularly su i i nyl covered floor(patentpend i ce access nt . co . i uk ng i . ng i ted tothe i Web i ght connect n pedestr watert K2107 grat Dra : www i i n a nage i ght connect . wade i an i i ons ngs ofsta i nt i . . co n ares . uk i i ons ng) i nless steelensure . . i n floor ISO 9001 Design considerations 2 od i s i l 2018 i ve i es are es are and es i . i s i Apr mportant ckel bronze ckel bronze i i es can be i on i c appeal of n bod i i re the use of re i . ng appearance i uk ngs to rece . i ngs i nstallat certa i ; co . lable, such as filter i Wade gull Wade nt . i . ven i es n plant rooms etc n plant rooms i ons i es i i lst of pleas shed floor areas where where shed floor areas i wade i ly ava . i sh of Wade floor gull sh of Wade i at n a g i i n fin nternal valves to backwater i shment projects to match per shment projects bute to the aesthet i nlets and tapp i : www ng gull i i i n general use i ngs or covers made of n ngs wh i shes on of gull pework, others requ i s, i i i i de i Web stance and appearance are stance and appearance are shed floors i i pework i als and fin i uk ve grat tems are read tems are . i i. pework i on to p . i ron grat ron i i co x on res . i on or refurb i n unfin i i ze of p es and var i nt i i onal i . . ntercept debr ntercept ted pework adaptors and/or coupl pework adaptors and/or i i ons when select i pework i i als and fin th attract i i on on mater ons zed cast i ngs or covers contr . i i i n Append nless steel are for use nless steel are i i derat rect connect rect tecture i cat i es w i i llary p i i : sales@wade pework l i i ven i g threaded p threaded best su are Standard opt Standard Mater corros Strength, cons P The type and s fundamental to the select for d Appearance Gull or sta the grat the area Sherard also for restorat Accessor and s backflow, prevent Informat connected to all p buckets to arch anc Custom made products can be manufactured for non-standard for non-standard can be manufactured Custom made products appl E-ma . ng es . ne i i i on i

ng . ng i ch n l i i 2 i n or i shed red to red i ng i s i ll i i ons are ons are on, al i neer i i i re the use re ng, cover Th i s catalogue i i . at heads of ; s requ les, res n N/mm . i i i es, terraces n the dra Th i i . c t i gn of the gully, gn of the gully, . ll requ : +44(0)1787 475579 i tres/sec) wh tres/sec) i i es es are subjected to es are . i i fferent vers fferent gnated for gnated dered when dered ng eng Fax i n matters concern i Some of the i i . i . lable space w i d ght commerc nfluence the type of i ; In other cases a non- nstalled i cles are manoeuvr cles are ng food process fy th . i es such as filter buckets i s smaller i i i i ng free area ng free i ll i . i ng le the use of an extens i i ng l ng or cover up to fin i i s also shown ld i ng collar i c loads ven below i i ed w i i nclud i . nyl, w i chever s usually the the s usually ngs i ngs and bod ons des s governed by the body free area, s governed area, by the body free nclud es, wh i th a trap i ng class for each grat i ng area i i i i i i i nage system and the and the nage system ons cular traffic such as cycleways and i i sure centres, balcon centres, sure thstand expected loads . i i i nage ng a bu i cular traffic, such as bathrooms, cular traffic, such as bathrooms, i ld shes such as ceram i rement homes, hotels, schools, rement i es i i . ons/standards nfluenced by several factors: grat cat i ng the grat i i n grat i i . i ng ty, body free area, des area, body free ty, cular traffic, such as car parks, factor : +44(0)1787 475151 i i i es w s i i th the floor construct th the floor ) for grat es are g es are mum amount of water (l i i 2 Tel i ves on of gull ght veh i i i ty of the spec ty of the ng, such as v sh, dra i i i th veh th l thout veh l c dr i i i ng baths, le i i th a damp-proof membrane w th a damp-proof n, and i i i r from enter r from ng free area, wh area, ng free i i ng ons must be compl nly governed by the grat b i i cular bu i ng of certa ft trucks and/or heavy veh i i i i th a membrane clamp ngs are based on stat ngs are cles or heavy wheel loads al that gull i i i mm i nds of floor fin ons or funct ons or s the max i pework and dra

on of gull on of i ng gull i i i . . i ll dra i

i ng regulat ons w ze, and features and accessor ze, and features ng ﬁn i i s ma areas or process plants, where gull plants, where or process areas forkl veh Heavy duty appl Areas w Areas and workshops – not and roof gardens and roof w Areas domest Areas w Areas shower areas, ret shower areas, sw i i i es w ence shows that at low heads of water the ﬂow rate of i i

ng or cover to be used i tary p lable – Bell, Bottle, ‘P’, ‘Q’, and ‘S’ lable – Bell, Bottle, ‘P’, i

i i

s essent fferent k fferent i i nfluence the select P400 the part M125 L15 factors that should be cons factors that should select operat or gully assembly, based on BS EN 1253, as follows: or gully assembly, K3 floor conversant w conversant may be necessary to br catalogue shows the load rat floor level of gull sheet floor cover Installat grat The depth of the structural slab and ava Floor and floor Flow rate Flow rate a gully w i Load rat It Local regulat Bu respons D Select Design considerations Design san prevent foul a prevent The load rat and traps Exper a gully outlet s free area, sump capac area, free (cm area shows free A trapped gully may be used where a water seal a water seal be used where A trapped gully may ava trapped gully may be used w water above 50mm flow rate or by the grat All such rat 3A Installation guidelines General Installation guidelines 4 installed withthetopofflangeatorbelowmembranelevel. adamp-proofmembraneisused,thebodymustbe Where Note See alsowade Page 3SFg 5 1 2 3 . . . . .

Inﬁllas requ

Apr appl Connect body(w the grat extens jo the bodyoutletus Where appl p Measure thed Check thatth i i pework andfin nt i l 2018 i cable) top i s watert i nstallat i ons, i ng orcoverflushandlevelw i ves add i i cable, screw threaded p i i nt f appl red i i i on gu ght s d . i co stance betweenthetopofconnect i Tel . pework i i . i i shed floorlevel . stance w th threaded p t uk/ : +44(0)1787 475151 i i i ng asu cable) tobe onal gu i del i nstallat i nes are prov . i i table sealanttoensure the i del ll enablethecompletegully(w i on i nes for i i pework adaptor nstalled w Membrane level . F i n i i i ded forgullycomponents shed floorlevel pework adaptor i th thefin Fax i nstall : +44(0)1787 475579 i th thetopfaceof i ng grat i shed floor i f i ngs des i nto i ng . i th i gned forusew E-ma i n at

flooring suchasvinyl,isillustrated onpage3SF. Installation ofgratingsandcovers forusewithflexiblesheet Note 8 7 heads. the screw washersbeneath supplied,fibre the suppliedgasketand,where membrane clampingcollarshouldbesealedtothebodyusing membrane and/orusingflexiblesheetflooringsuchasvinyl,the a membraneisnotused.Ininstallationswithoutbelow-floor the gratingorcovertobody, soitmustbefittedevenwhere toconnect In somecasesthemembraneclampingcollarserves Note 6 i l . . . : sales@wade

good qual floor us as appl watert All jo downstream p occur marble, pav these weepholesshouldnotgenerallybesealed prov Infill orlayfloorscreed andapplyfinalfloorfin assembl F he collar tothebody–certa does notrestr i Where appl i nto thesumpofbody, ensur led fin i t grat

i ght adjustab i i de supplementarydra nts needtobesealedensure thatleaksdonot i i i ght assembly n theeventofwaterback i shed floorw i i ng, cover, orfunnelw i cable ng he th flex i es spec i nt i ty sealantonallthreaded jo i . i cable, dress themembraneoverflangeand co ors, terrazzo)around the grat ; i settopfaceflushandlevelw i ght adjustab i . i ct theoutlet ble sheetfloor uk pe blockageoccurs i l i i ty fied w . Web i th adampproof membrane .

: www i th weepholes,wh i n collarsare revers ; i i boltthemembraneclamp l nage from abovethemembrane i ty features . wade i i ng suchasv th extens i i ng up ng thatthemembrane i nt . Theexcept . co . i uk . nts toensure a i i Useasu ons, frameorcollar n thegully, e i i ch are des ng orcover i nyl i th theﬁn i ble to . i sh (e i . on

. i table, i i s gully . ncrease g . i gned to g i . . i shed t ng .

i i les, f a ;

Installation guidelines 3SF ng i ng i s l 2018 i i mber i ng pack T brane i Apr p-proof m ng m i e m Da . ng collar ng the floor i i uk ng access plug i . co sturb . i Floor cover nt i Rodd ng/cover . i es, Wade has developed has developed es, Wade i wade ng use of modern . i thout d i Grat Where a clamp Where . : www nyl i ncreas i Web ng i pework w i th damp-proof membrane th damp-proof i n the uk n a wooden floor i . i co . on on w i i nt i slab ng such as v ng such as i ng i p ng collar i collar brane nlet Structural m i onal ble sheet floor Floor screed Floor cover s reflected s reflected nstallat nstallat gn and manufacture of gull gn and manufacture i Gasket i i i i i mber Body m i cla T de support i Opt Me cal cal s Flex clamp i i ngs : sales@wade i l i ld i Typ Typ ble sheet floor n the des i i E-ma n bu i th flex i . n accordance n accordance . i

. ene and safety ene and safety i on at the forefront on at the forefront i ng : +44(0)1787 475579 t i i ngs/covers i fically for use w fically for use ngs and covers are removable for access to p for access to removable are ngs and covers i i Fax on i mber floor i ts pos i on must be i th i . nstallat i ron backnut, connected ron i ned, yet grat ng w uk/ nstallat i i . i ckel bronze grat ckel bronze i co pework . nyl covered t nyl covered nt, i i i gher standards of hyg gher standards th cast i nt i i s obta shed products spec shed products i c p : +44(0)1787 475151 i i In keep . n a v ch accompany the grat i Tel i ght jo i ng, w ng i i th K2302 n i nage ght seal i i ons wh i

See also wade

de demand for h de demand . stant ﬂoor

i i eve a watert ght dra i i al i ron body w ron i nstruct i

th ckel bronze grat ckel bronze p-res rectly to 40mm plast rectly i i i i To ach To Watert N d w N213 G202

Gratings and access covers for use with flexible sheet flooring such as vinyl as such flooring sheet flexible with for use covers access and Gratings Worldw Installation guidelines Installation mater sl fitted a watert a range of superbly fin a range of Cast Stainless steel gullies Stainless steel gullies A range of stainless steel gully assemblies is available for use, particularly in areas associated with food production, processing or preparation where corrosion resistance or minimum maintenance is a requirement. Assemblies and typical installations

Trapped gullies, 200mm square at FFL Typical installation Select gully body assemblies from page 4B1, and 192mm square Finished floor Finished floor gratings from page 4G Damp proof Damp proof Floor screed membrane Floor screed membrane

Q2434 height adjustable gully body assembly with Optional Optional membrane membrane optional membrane clamping clamping clamping collar (option ‘C’) and Q9233 collar collar Streamline grating. Optional Optional side inlet side inlet Bell trap Bell trap

Structural Structural slab slab

Q2434 Typical installation Trapped gullies, *300mm square at FFL 200 sq. Select gully body assemblies from page 4B2, and 293mm square Optional membrane Sheet floor covering Flexible sheet 72 MaxFloor Flexible sheet flooring Sheet floor covering clamp frame gratings from page 4G flooring 47 Minscreed clamp frameclamping collar Floor screed (add suffix ‘C’)

Q1234 gully body assembly with 186 optional flexible sheet flooring clamp (option ‘V’) and Q4332 anti-slip mesh grating.

90 Trap

Removable 1trap10 O.D. Structural Structural assembly slab slab

Features Stainless steel body assemblies are shown on pages 4B1 and 4B2; gratings are on page 4G. 300 sq. Trapped – all Wade stainless steel body assemblies are trapped. Some versions can be supplied as non-trapped by 150 specifying option ‘N’. 210 Full-bore rodding access is provided on all body assemblies except Q2334 (38mm) and Q2434 (90mm). Side inlets (optional) are fully trapped. Filter buckets (optional) to intercept debris. 60 300 Choice of gratings including perforated, anti-slip mesh, Removable trap assembly plain mesh, bar and Streamline. Outlet to suit 100mm BS 416

Notes *1. Optional flexible sheet flooring clamp increases size of gully body, so Q1234V illustrated on this page is 325mm square (visible dimension at F.F.L.). 2. Optional flexible sheet flooring clamp is also available on 200mm square gully body assemblies, increasing their visible dimension at F.F.L. to 225mm. Stainless steel body assemblies – 200mm square 1 4B

. s Nylon (Q23 or Q24) i l 2018 i s a i 65 Apr on 9) i pework i

. de s 225mm stance i 95 i i Optional side inlets up to four at 90° max. 2" BSP Removable bell trap assembly – suffix ‘V’ uk Optional side inlets up to four at 90° max. 2" BSP Removable upstand Membrane clamping collar (optional) Rodding access plug and seal Bell trap assembly Frame . co . on res 5mm Gasket seal Outlet to suit BS 416/DIN 19522/plastic (100mm nominal bore) i (Standard depth (Standard . nt i ght adjustable) or Gasket seal Outlet to suit BS 416/DIN 19522/plastic (100mm nominal bore) i s recommended and s recommended i nless i wade . Sta steel (Q27 or Q28) ng clamp frame gh corros i i ng up to 3 : www i s 18mm (he i . 200 sq. 185 dia. Web 110 O.D. 110 – suffix ‘C’ (factory fitted) 200 sq. 185 dia. 110 O.D. 110 lter bucket

i mum 2" BSP (select from sect mum 2" BSP (select from i uk M W V add sufﬁx ‘B’ Deep bucket (Q27 only), add sufﬁx ‘BD’) . ][

co ncrease ncrease . i they can be connected to other p they can be connected ; M N V ble sheet ﬂoor nt ’ max

i i ][ ][ 60 – sufﬁx ‘N’ (Q2834 only) nage at membrane level ng collar

i i ble sheet floor ght 60 i i A B C B 60 215 – suffix ‘A’ (factory fitted) – suffix ‘A’

– Select from page 4G, 192mm square (not Q7235) page 4G, 192mm square – Select from – Select from page 4G, 192mm square – Select from 90 ght adjustable) i 186 – – pework ve atmosphere, grade 316 ve atmosphere, nless i i i 47 min. 72 max.

– suffix ‘W’ (Q23 and Q24 only), to prov ze of flex ngs ngs – suffix ‘ th flex i – suffix ‘M’ i i ons ons i Sta steel (U511) i i . : sales@wade l i overall he ; ons/Features ons/Features Grat Opt Q2834 Q2434 Grat Opt nlets i i on, showers and areas where h where and areas on, showers E-ma i de i

Opt 23mm (non-he Grade 316 Non-trapped body Weepholes supplementary dra For use w Note FFL s square Bolt-on funnel F Asphalt ﬂange Membrane clamp S . ng an aggress 65 i 9 2 9 8 . . . . . 95

Optional side inlets up to three at 90° max. 2" BSP Rodding access plug and seal Membrane clamping collar (optional) Optional side inlets up to three at 90° max. 2" BSP . ng food preparat ngs shown on page 4G ngs shown i i onal i on 10 i : +44(0)1787 475579 llustrated ng pools or hav ng pools or i trapped – 60mm seal 60mm – trapped Trap i Removable trap Opt deep bucket Fax nclud i ron BS 416/DIN 19522 and PVC p BS 416/DIN 19522 and PVC ron i mm i type kg Trap n Sect i ons i ngs are ngs are i cat 60 th a ﬁne thread i i nless steel grat nless steel i Grat . 2 on to cast i 200 sq. 200 sq. ng 185 dia. 185 dia. cm i on appl i Free area area Free ons such as sw ons such as i : +44(0)1787 475151 ﬁcat cat i Tel . i M W V ze i ][

rect connect rect Codes for the selected body assembly, Codes for the selected body assembly, 60 i . 60 M V

mm seal ][ ons

i Frame In appl

gh spec . ght adjustable . i Gasket A B C B Outlet s i th 192mm square sta square th 192mm i on sufﬁx and grat

– Select from page 4G, 192mm square (not Q7235) page 4G, 192mm square – Select from – Select from page 4G, 192mm square – Select from i

fy/order n h – – i 110 O.D. 110 i 110 O.D. 110 111 140 Outlet to suit BS 416/DIN 19522/plastic (100mm nominal bore) Outlet to suit BS 416/DIN 19522/plastic (100mm nominal bore)

. ngs ngs rement ght adjustable – w ght adjustable 285 256 es are for d es are i i i

ons ons i i lable on request i i i 47 min. 72 max. Q2334 100 60P 4 Spec Code Q2434 100 514 Bell Q2734 100 70P 3 Q2834 100 65 Bell 3 Bell Q2834 100 65 systems by means of adaptors shown systems by means of requ on page 4G Note See pages 5Bntss, 5Btss, 5Gss and 5Vss for Vari-Level stainless steel gullies. Pages 6Gss and 6Vss show direct connection gratings and access covers of stainless steel. Opt body opt To spec To Quote the Spec Bod Non-he Q2734 Grat He Q2334 For use w Connect Stainless steel grade 304, 304, steel grade Stainless For use Stainless steel body assemblies – 200mm sq. – 200mm assemblies body steel Stainless ava Grat Opt 2 4B Stainless steel body assemblies Bod Opt Grat connection gratings andaccesscoversofstainless steel. stainless steelgullies. Pages6Gssand6Vssshow direct See pages5Bntss,5Btss,5Gss and5VssforVari-Level Note on page4G body opt Quote theSpec To spec Opt Grat Q10 Ser systems bymeansofadaptorsshown For usew Connect For use Stainless steelgrade304, Stainless steelbodyassemblies–300mmsq. ava requ Q1334 ‘Q’trapped 100mm BS416 Outlet tosuit Code Spec 13 0 5 16 Bell 53 Q1034 100 13 5 1616 Bell 176 Q1036 150 13 0 7 8 P 78 Q1234 100 13 0 78 Q1334 100 8 Q 13 0 53 Q1434 100 Bell 6 13 5 176 Q1436 150 Bell 6 Apr i i i lable onrequest i ons ons i i i es are ford rement ngs ngs . i

l 2018 i i – – n h 206 fy/order i – Selectfrom page4G,293mmsquare – Selectfrom page4G,293mmsquare on sufﬁxandgrat i th 293mmsquare sta 510 75 Outlet s B B . i i . gh spec

Inappl es belltrapped i 150

ons ][ ][ mm

M NV M V 60 104 . Outlet tosuit100mmor150mmBS416 i Codesfortheselectedbodyassembly, rect connect 60 i Tel ze i . i cat ﬁcat : +44(0)1787 475151 Removable trapassembly i ons suchassw Free area i on appl i cm ng 300 sq. i 300 sq. on tocast 2 . Grat i nless steelgrat or 100mmpipework,upto3at90° Optional sideinletstosuit50,75 i cat

i ngs are i ons i n Sect Trap yekg type i mm i Fax ron BS416/DIN19522andPVCp i nclud : +44(0)1787 475579 i trapped –60mmseal i ng poolsorhav llustrated ‘O’ RingSeal Assembly Bell Trap Removable up to4at90° pipework, or 100mm suit 50,75 inlets to Optional side i on 10 i i 300 ngs shownonpage4G ng foodpreparat . .

100 160 . . . 5 2 i ng anaggress E-ma i on, showersandareas where h S Q1234 ‘P’trapped 325mm square For usew Non-trapped bodyassembly Grade 316 Note Opt Grat (Suffix ‘B’) Sta F Q14 Ser Opt Grat Opt 100mm BS416 Outlet tosuit i (U511) funnel Bolt-on l : sales@wade i i de lter bucket i . nless steel i i ons ons i i FFLs ngs ngs i i nlets ons/Features i i ve atmosphere, grade316 pework – – 210 – Selectfrom page4G,293mmsquare – Selectfrom page4G,293mmsquare i 250 –suffix‘M’ th flex 75 –suffix‘ i B B ze offlex i i es belltrapped

nt 150 ][ ][

. M V M NV co ; theycanbeconnectedtootherp 60 93 Outlet tosuit100mmor150mmBS416 . i uk 60 ble sheetﬂoor ][ ’ max i ble sheetﬂoor Web Removable trapassembly : www i mum 100mm(selectfrom sect

300 sq. i gh corros 300 sq. –sufﬁx‘N’ . wade or 100mmpipework,upto3at90° Optional sideinletstosuit50,75 i ng upto3 i s recommended and

i ng clampframe i nt . co i on res . uk . ‘O’ RingSeal 5mm Assembly Bell Trap Removable i stance 300 . .

i 100 pework –sufﬁx‘V’ (U1704) assembly bell trap Removable i s i s a i s i on 9) Stainless steel gratings 4G . . s i l 2018 i . s a i Apr

stance i rcular apertures) rcular i nless steel es i uk i . co . on res i ted for barefoot zones ted for barefoot nt i i s recommended and s recommended i Heel-proof reverse wedge reverse Heel-proof . wade .

ne i Also su gh corros . i : www ted for bathrooms, shower areas etc shower areas ted for bathrooms, i Web Su Q6230 Smooth perforated (c Q92, Q93 ser Streaml proﬁle ons i uk . – Made of grade 316 sta co . Opt M nt i th i ve atmosphere, grade 316 ve atmosphere, i 2 5 3 8 1 3 1 5 5 2 8 gn w ...... i cs and i : sales@wade l i st

i ng ng i i es es . on, showers and areas where h where and areas on, showers E-ma i i i shed des i class kg class kg ng an aggress Load rat Load rat i on 4B i Establ . ng character i 2 2 ng i 61 K3 1 95 K3 0 n sect i cm cm Free area Free Free area Free n mesh i ng food preparat i : +44(0)1787 475579 generous free area free generous Bar grat Q52, Q53 ser Pla Q72, Q73 ser good load ng pools or hav ng pools or satin ﬁnish satin i . . es shown Fax nclud i a a i i i mm i . dth mm dth mm . i i ons i w w es shown on page 4B2 es shown on page 4B1 i i Max apperture Max apperture Max apperture Max apperture cat i mm mm Depth Depth on appl i ons such as sw ons such as

i : +44(0)1787 475151 ted for wet or ﬁcat cat i i dth dth . es Tel . i i i i mm mm W W

nless steel body assembl nless steel i nless steel Double notched bars Double notched bars i ng su . i ons i In appl gh spec . i mm mm th sta i

Length Length

n h s grat i i p mesh

i . . es gully funnel i rement i

lable on request -sl i i ted for bathrooms, shower areas etc shower areas ted for bathrooms, i Code Code Spec Spec Q4332 293 293 30 23x23 670 L15 2 Q4232 192 192 30 23x23 290 L15 1 Q5232 192 192 30 23x23 290Q5332 293 L15 293 1 30 23x23 670 L15 2 Q6230 192 192 30 8 d Q7335 293 293 30 10 550 M125 7 Q6430 192 192 30 8x8 77Q9333 293 K3 293 1 30 5 405 L15 2 Q7235* 192 192 30 10 209 M125 3 Q9233 192 192 30 5 216 L15 1 U5232 192 192 30 55 d make th requ Note Please ensure that size of the selected style of grating matches the selected body assembly. stainless steel gullies. See pages 5Bntss, 5Btss, 5Gss and 5Vss for Vari-Level 293mm square body assembl fit 300mm square To To fit 200mm square body assembl fit 200mm square To *Q7235 is for use with Q2734 and Q2834 gullies only. 192mm square U5232 sta 192 square Q ser Q6430 apertures) Smooth perforated (square Su Ant For use w Q42, Q43 ser Connect floors greasy Stainless steel grade 304, 304, steel grade Stainless For use Stainless steel gratings steel Stainless ava Vari-Level Vari-Level A Vari-Level gully comprises, as a minimum, a Vari-Level body The term Vari-Level refers to the fine and a Vari-Level grating; in some versions these items fit together directly, but, mostly, connection is by means of adjustability of the height of a grating or an inter-connecting, dual-purpose part – a membrane access cover above a body; this feature clamping collar. enables installation exactly at finished To address a myriad of applications, different versions of Vari-Level bodies are available for use with a wide range of floor level by rotating the grating or Vari-Level gratings, Vari-Level access covers and Vari-Level access cover. accessories, as illustrated in this section.

Representation of a Vari-Level gully assembly with accessories and threaded pipework adaptor

Catalogue page

Funnel Accepts indirect discharge 5X (bolt-on) from waste pipes (optional)

Gratings Access covers Grating or Cast iron 5G ci 5V ci access cover Nickel bronze 5G nb 5V nb Stainless steel 5G ss 5V ss

Extension Provides additional height 5X for gratings and access covers (optional)

Membrane Also serves to connect the 5C clamping collar grating or access cover to (with gasket) the body on most series; optional facility on others

Body Non-trapped, cast iron 5B ntci For use with bituminous membrane 5B ntcibm For use with cavity membrane 5B ntcis Non-trapped, stainless steel 5B ntss Trapped, stainless steel 5B tss Trapped, cast iron 5B tci Trapped, plastic 5B tp

Threaded Enables effective connection pipework to all sizes and types of adaptor pipework in general use 10 Vari-Level – Assemblies and typical installations 1 5A l 2018 i SLAB SLAB GASKET GASKET SLAB Apr STRUCTURAL MEMBRANE CLAMPING COLLAR STRUCTURAL MEMBRANE CLAMPING COLLAR STRUCTURAL GRATING / COVER GRATING COLLAR STRUCTURAL SLAB STRUCTURAL SLAB CLAMPING MEMBRANE uk . DAMP PROOF MEMBRANE DAMP PROOF MEMBRANE DAMP PROOF MEMBRANE co . nt i wade . FLOOR SCREED FLOOR SCREED FLOOR SCREED FLOOR SCREED : www MEMBRANE COLLAR Web FINISHED FLOOR FINISHED FLOOR FLEXIBLE SHEET FLOORING OPTIONAL FINISHED FLOOR SIDE INLET CLAMPING FINISHED FLOOR MEMBRANE OPTIONAL SIDE INLET uk . co . nt i suitability of a drain assembly in a particular application. a drain assembly in a suitability of to imply that they must be used in this way. There aremany way. in this must be used that they to imply These typical installation drawings serve drawings typical installation These the general to illustrate variations of ﬂoor build up and it is for the end user to determine ﬂoor build up and it variations of : sales@wade l i principle of how such assemblies aresuch assemblies of how principle are These used. intended not E-ma : +44(0)1787 475579 Fax ckel i nous i n es – es

ng i i th i ckel i i membrane n : +44(0)1787 475151 nlets tum i membrane i membrane L2103 K2103 Tel D10 es . i for product for product K5601 C i ng J2 . de i bm for product bm for product C . for product for product i i i C K2302 C th membrane th i th b i ckel bronze ckel bronze i i th es th i ckel bronze ckel bronze i i i ng and ng i i n nless steel grat i

on) on) on) on) ron ron ron i i i i i i i body w body assembly w body w ng collar, s ng collar, ng collar and ng collar, ng collar, ng collar and sta i i i i nless steel body w body w i

ng L2103 i ckel bronze grat ckel bronze i nformat nformat nformat nformat Trapped bod Trapped (See pages 5B tc Cast G303C clamp membrane i QB114 Non-trapped body assembl (See pages 5B ntss for product i J204 Sta for use w L3601 (See page 5B ntc D1109 Cast Non-trapped bod i and C504 i (See pages 5B ntc (See pages grat Cast bod Non-trapped clamp Assemblies and typical typical and Assemblies installations Vari-Level n access cover clamp grat bronze “SuperSeal” n clamp bronze grat bronze 2 5A Vari-Level – Assemblies and typical installations Trapped bodyassembl i (See pages5Btssforproduct Sta i (See page Trapped bodyassembl Plast 1A x2"s C GD144 i (See pages5Btc Trapped bodyassembl Cast installations Assemblies andtypical Vari-Level QG114C K2302 GP614 L2901 GP1104 and C GC144 and membrane clamp n nformat nformat nformat i . . ckel bronze accesscover D C Apr membraneclamp membraneclamp L2501 L2902 i nless steel i l 2018 sta n bodyassemblyw bodyassemblyw bodyassemblyw i i bodyassemblyw i i i c i ron on) on) on) bodyassemblyw ckel bronze grat i de i

nless steelgrat 5B tpforproduct n sta i i ckel bronze grat nlet and i nless steelgrat i i forproduct ng collar Tel : +44(0)1787 475151 K5203 i i ng collar, ng collar i i i i ng i th th th ng i th i th

i ng i ng i i i es es es Fax : +44(0)1787 475579 E-ma i l : sales@wade principle of how such assemblies are used. These are notintended used.Theseare principle ofhowsuchassembliesare variations of floor build up and it is for the end user to determine variations offloorbuildupanditisfortheendusertodetermine These typical installation drawings serve toillustratethegeneral These typicalinstallationdrawingsserve to implythattheymustbeusedinthisway. many are There suitability ofadrainassemblyinparticularapplication. i nt . co . uk FINISHED FLOOR FLOOR SCREED MEMBRANE FINISHED FLOOR BELL TRAP COLLAR CLAMPING MEMBRANE OPTIONAL CLAMPING SIDE INLET OPTIONAL STRUCTURAL MEMBRANE Web COLLAR CLAMPING MEMBRANE DAMP PROOF FLOOR SCREED FINISHED FLOOR GASKET SIDE INLET OPTIONAL COLLAR FLOOR SCREED : www FLOORING FLEXIBLE SHEET SLAB FINISHED FLOOR . wade FLOOR SCREED FLOOR SCREED i nt . co DIP TUBE REMOVABLE . uk DAMP PROOFMEMBRANE DAMP PROOFMEMBRANE INDIRECT WASTE PIPE ADAPTOR STRUCTURAL MEMBRANE DAMP PROOF SLAB STRUCTURAL BOTTLE TRAP REMOVABLE SLAB STRUCTURAL GASKET SLAB STRUCTURAL SIDE INLET OPTIONAL MEMBRANE DAMP PROOF COLLAR CLAMPING MEMBRANE GASKET SLAB GASKET COLLAR CLAMPING MEMBRANE SIDE INLET OPTIONAL 1 Vari-Level bodies – non-trapped i 5B ntc . on, l 2018 i i CL . pework i . Apr . . on to p i on – see page 5A1 i ng collar also ng collar C i i uk . pework are shown shown pework are i nus 30mm i . co . . nt . i nstallat i on 5X on 5V . i i zes of p cal Code or refer to page 5C2 Code or refer nage at membrane level) wade i i i . . on 5X i Typ . ng/cover m ng/cover plus 15mm i i on 5G n sect ned by means of an extens : www i i i stance between body flange and i Web ; es (membrane clamp i ng/cover to the body) – see table for – d i uk ng collar . i ty ght of grat ght of grat i i i . es shown l i i co – select membrane clamp . . – select from Sect – select from fferent types and s types and fferent nt ves i i

ng/cover i i – select from Sect – select from for C ser ght can be obta – see page 5C2 nage i de supplementary dra i i es es i i – select from Sect – select from mum – he mum th BSP threaded outlet are for connect for outlet are th BSP threaded i ng to d mum – he i i i ons i n ngs i i cal outlet (threaded) – shallow sump cal outlet (threaded) i ght adjustab : sales@wade Extra he connects the grat Spec collar 4" throat standard for alternat Required i l i near dra i ons w i top of grat see page 5X2 Accessor Max M Weepholes He prov (to L C3 ser Vert Opt Access covers Grat Membrane clamp outlet – see page 5C2 4" channel to accept Wade E-ma vers ; 9 8 8 3 1 3 4 7 3 ...... kg

;

. ons 5G and 5V and accessor ons 5G and pework i i 2 cm n sect ls of adaptors for connect ls of adaptors i i on to p Free area Free i ng collars i : +44(0)1787 475579 Deta Fax . c 44 3 c 44 c 78 3 c 78 i i pework i system rect connect rect i P Code from the table above Code from . pework adaptor ve membrane clamp i i Spec ze i : +44(0)1787 475151 s Outlet Tel Collar ngs and access covers shown ngs and access i got outlet are for d for got outlet are , non-trapped i

ons and i . CC 4" BSP 82mm Plast – 78 2 C 3" BSP – 44 2 C 2" BSP – 19 2 C 100mm 19522 BS 416/DIN 78 3 C 75mm BS 416 44 3 416 C44 BS 75mm C3 437 C44 3 437 78 CPlast 110mm BS 75mm BS 100mm ...... es th grat Collar i th sp i i

fy/order i Code Body . on 10 i fy

i es w

cal outlet (threaded) – shallow sump cal outlet (threaded) i i Spec C204 C C343 C C203 C C202 C C344 C C393 C C344 C C363 C C364 C Body n sect For information please contact our on ﬂow rates Services Department. Technical see page 5C2 for alternat To spec To Spec Bod p of a threaded by means i Vert C2 ser For use w Cast iron Cast Connect Vari-Level bodies Vari-Level ntc 5B Vari-Level bodies – non-trapped i 2 Technical Department. Services onﬂowratespleasecontactour For information see page5C2foralternat Spec To spec adaptors forconnect D4 ser C5 ser Bod For usew Connect Cast iron Vari-Level bodies Vert Vert Body Spec 46C C D406 D404 26C C C C D206 C D204 C504 C503 C502 Apr i i i cal threaded outlet–deepsumpplusopt cal threaded outlet–deepsumpplusopt es haveBSPthreaded outletandare forconnect i

fy i l 2018 Body i fy/order i i i th grat . es es Code i and ons

Collar , non-trapped i ...... ngs andaccesscoversshown "BP7 7 6 7 78 44 19 4"BSP 3"BSP 2"BSP C C C "BP1619 11 176 78 6"BSP 4"BSP D D "BP166 7 176 78 6"BSP 4"BSP D D Collar Tel : +44(0)1787 475151 i ng tod Spec i ve membraneclamp i Outlet fferent typesands s . Codefrom thetableabove i ze Fax : +44(0)1787 475579 Free area i i onal s onal s cm i ng collars i zes ofp i n sect 2 i i de de i on top i ons 5Gand5Vaccessor i i i nlet nlet . pework are shown ;

kg ...... 9 8 2 8 9 6 6 i pework bymeansofathreaded p E-ma L channeloutlet –seepage5C2 (C5 ser (to prov Weepholes Vert S Accessor D2 ser Membrane clamp Access covers Opt Grat He D ser M Max M Max C topofgrat ser i l i i : sales@wade near dra de i Required for alternat standard 4"throat collarSpec also connectsthegrat see page5X2 Extra he ght adjustab i cal threaded outlet–shallowsump i i i i ngs n n i nlets ons i i u –he mum –overallhe mum i i mum – he mum – he i i i n sect –selectfrom Sect es es i i i es es es) orC i – i de supplementarydra i nage – see page5C2 ght canbeobta i forCandDser nt – selectfrom Sect i i ng/cover

ves .

i co on 10 D4 ser select from Sect –selectfrom Sect . –selectmembraneclamp i i . l es shown uk . i i i i . ght ofgrat ght ofgrat ght ofgrat ty i DL, (D2andD4 ser ng collar –d . Web i es only) ; i stance betweenbodyﬂangeand i i ght ofgrat ng/cover tothebody)–seetablefor : www i i i i ned bymeansofanextens n sect on 5G pework adaptor i i i i es (membraneclamp ng/cover plus10mm ng/cover plus15mm ng/cover m . Typ . . wade i i on 9(C5ser on 5X . i i . nage atmembranelevel) cal Codeorrefer topage 5C2 i i . on 5V on 5X i i ng/cover m nt i nstallat i . . es) toacceptWade 4" co . . i . nus 30mm uk i ng collarC . i Deta i es and on –seepage5A1 i nus 30mm i . . i ls of ng collar . . CL i on, . . Vari-Level bodies Var i Cast iron, non-trapped -Level bod Connections For use with gratings and access covers shown in sections 5G and 5V and accessories shown in section 5X. Bodies have BSP threaded outlet and are for connection to pipework by means of a threaded pipework adaptor. Details of adaptors for connecting to different types and sizes of pipework are shown in section 10.

Typical installation – see page 5A1 i es – non-trapped B504 D604 45° Threaded outlet 45° Threaded outlet

D7 series Horizontal threaded outlet – shallow sump Reversible membrane clamping collar (required – see table/options)

Spec. Code Outlet Free area Options Body Collar size A B cm2 kg Access covers – select from Section 5V. B504 C.B 4" BSP – – 78 3.5 Gratings – select from Section 5G. D604 C.D 4" BSP – – 78 10.7 Membrane clamping collar D702 C.D 2" BSP 127 86 19 7.0 Optional for B504 – see table for collar Spec. Code D703 C.D 3" BSP 127 73 44 6.5 Required for D series (membrane clamping collar also D704 C.D 4" BSP 150 83 78 10.0 connects the grating/cover to the body) – see table for standard 4" throat collar Spec. Code or refer to page 5C2 for alternatives. Height adjustability – distance between body ﬂange and To specify/order top of grating/cover; Specify Body and Collar Spec. Code from the table above; B504 see page 5C2 for alternative membrane clamping collars. Maximum – height of grating/cover plus 5mm. Note: Membrane clamping collar is optional for B504. Minimum – height of grating/cover minus 15mm. D series For information on ﬂow rates please contact our Maximum – height of grating/cover plus 10mm. Technical Services Department. Minimum – height of grating/cover minus 30mm. Extra height can be obtained by means of an extension, see page 5X2. Accessories – select from Section 5X. Weepholes – see page 5C2 (D series only). (to provide supplementary drainage at membrane level). Linear drainage – select membrane clamping collar C.DL to accept Wade 4" channel outlet – see page 5C2 (D604 and D7 series only).

Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadeint.co.uk April 2018 5B ntci 3 ntc 5B Vari-Level bodies – non-trapped i bm are shown p Connect Spec To spec D12 ser D10 ser Bod For usew Cast iron Vari-Level bodies see page5C2foralternat Hor Vert Technical Department. Services onﬂowratespleasecontactour For information 'A' 90 10 C D1209 10 C D1208 Body Spec 10 C D1002 10 C D1003 10 C D1004 10 C D1107 10 C D1108 10 C C D1207 D1109 i pework bymeansofathreaded p 57 Apr i i 7 zontal threaded outlet i cal threaded outlet es w i

fy i 6 l 2018 . Code Body i fy/order Collar i th sp i th grat i ...... n sect i i 1 "BP13179 7 6 78 91 117 183 4"BSP D10 1 "BP1967 119 3"BSP D10 1 "BP–––1 5 19 – – – 2"BSP D10 1 "BP–––4 4 44 – – – 3"BSP D10 1 "BP–––7 3 78 – – – 4"BSP D10 1 0m6 3 94 19 – 238 61 50mm D10 1 5m 715–4 3 44 – 165 87 75mm D10 1 0m 1 9 88 78 – 80 190 119 112 2"BSP 100mm D10 D10 es es i and ons i , non-trapped(forusewithbituminousmembrane) got outletare ford

i ngs andaccesscoversshown i on 10 Collar Tel Outlet : +44(0)1787 475151 s 98 2", 3"or4"BSP i eABC B A ze Outlet thread . Spec 4" NPSM 235 dia. 305 dia. 4" NPSM thread i ve membraneclamp 195 305 dia. 235 dia. thread . Codefrom thetableabove 'C' i rect connect i pework adaptor . . 4 46 44 143 5 4 96 19 143 5 Fax : +44(0)1787 475579 2", 3"or4"BSP Gasket Outlet thread i Free area ng collars i Gasket on toBS416p i n sect cm table/options) (required –see clamping collar Membrane table/options) (required –see clamping collar Membrane 57 . 2 Deta 'B' i ons 5Gand5Vaccessor . i ; ls ofadaptorsforconnect

kg ...... 7 5 5 7 0 3 3 2 7 i pework E-ma BS 416sp 2. 1. Notes toacceptWade 4"channeloutlet–seepage5C2 D11 ser Membrane clamp Access covers Opt L He Grat Weepholes Accessor seepage5X2 Extra he M Max of grat 'B' i l i : sales@wade near dra i below thefinished floor. asphaltisdressed also availableforusewhere 1 and2are Versions ofGseriestrapped gulliesshownonpages5Btci for useinasphalt/composition finished floors. and K2591Agratingsshownin Sections 5Gciand6Gare WB3 andWB5gulliesshownin Section7andK2501A (to prov for alternat standard 4"throat collarSpec also connectsthegrat Required ; ght adjustab vers 7 i i ngs n i ons i mum – he i mum – he i ons w –selectfrom Sect i ng/cover (basedon20mmmembrane) i i es i i got outlet de supplementarydra i nage i –seepage5C2 ght canbeobta es i forD10-D12ser nt – selectfrom Sect i ves . i co th BSPthreaded outletare forconnect –selectfrom Sect

i . –selectmembraneclamp i i ng tod . l es shown uk . i i i ght ofgrat ght ofgrat ty i ng collar –d Web 4" NPSM i i fferent typesands stance betweenbodyﬂangeandtop 305 dia. i thread 235 dia. ng/cover tothebody)–seetablefor 195 : www 'A' i i i ned bymeansofanextens n sect on 5G i i i ng/cover m ng/cover m . Typ es (membraneclamp

. wade i on 5X . i i nage atmembranelevel) Codeorrefer topage 5C2 cal i . on 5X i on 5V i nt i nstallat . . co . i i . . nus zero nus 20mm uk i i ng collarC zes ofp i on –seepage5A1 Gasket to BS416 conforms Outlet spigot ; table/options) (required –see clamping collar Membrane . 57 i ng collar i . pework . i . on to D10LW i on, . s Vari-Level bodies – non-trapped i 5B ntc on i on, l 2018 i i on to i nstallat i pework Apr . . i uk/ . ; Cast iron threaded collar to accept Vari-Level grating/cover (included) Cast iron slotted membrane clamp (included) Cast iron drain body co . zes of p nt i i uk . nus 30mm nus 10mm . i i . co . nt . i on 5V i on 5X . i wade

. on 5X i ng/cover m ng/cover m i i on – see wade on 5G i n sect ned by means of an extens : www i i i stance between body ﬂange and top fferent types and s fferent i i Web 'B' thread nstallat 220 dia. 305 dia. – d i 4" NPSM uk . ty ght of grat ght of grat i i i es shown l ng to d i cal i co . i i . – select from Sect – select from th BSP threaded outlet are for connect are outlet th BSP threaded i nt i Sect – select from Typ ght can be obta i es i ng/cover (based on 20mm membrane) i – select from Sect – select from ons w i mum – he mum i mum – he mum – i ons i n ngs i

vers 105 max. 105 ght adjustab got outlet ; : sales@wade Extra he i

i l

i 78 min. 78 'A' see page 5X2 Accessor of grat of Max M He Opt Access covers Grat SD202, SD203, SD204 SD202, SD203, Sp E-ma pework i 1 3 9 4 6 2 8 8 ls of adaptors for connect ...... i kg ons 5G and 5V and accessor ons 5G and i Deta . 2 n sect Cast iron threaded collar to accept Vari-Level grating/cover (included) Cast iron slotted membrane clamp (included) Cast iron drain body i on to BS 416 p on to BS 416 i cm Cast iron drain body Cast iron threaded collar to accept Vari-Level grating/cover (included) Cast iron slotted membrane clamp (included) : +44(0)1787 475579 'C' Free area Free Fax . Outlet thread 2", 3" or 4" BSP 67 – 12 80 – 12 117 – 14 pework adaptor i rect connect rect i

–– – – 87 – – 11 111 – – 11 'B' ––– – 11 183 90 119 145 119 145 190 165 238 . : +44(0)1787 475151 thread thread 220 dia. 305 dia. 220 dia. 305 dia. 4" NPSM 4" NPSM Tel Outlet thread on 10 2", 3" or 4" BSP i ngs and access covers shown ngs and access i ze A B C i got outlet are for d for got outlet are s , non-trapped (for sub-surface drainage such as with cavity cavity with as such drainage sub-surface (for , non-trapped i 75mm 50mm Outlet 4"BSP 3"BSP 2"BSP 4"BSP – – – – 10 3"BSP – – – – 10 2"BSP Code from the table above Code from 100mm ons . i n sect i th grat i th sp i

fy/order i

fy Spec

. i

es w

i zontal outlet i max. 105 105 max. 105

pework by means of a threaded p a threaded pework by means of 78 min. 78 i min. 78 'A' 90 SD304 SD303 SD302 SD204 SD203 SD202 SD104 SD103 Code Spec SD102 Connect membranes, where membrane is below insulation) is below membrane where membranes, p shown are SD302, SD303, SD304 Bod SD102, SD103, SD104 SD102, SD103, For use w Cast iron Cast Vari-Level bodies Vari-Level To spec To Spec Hor Threaded outlet Threaded For information on ﬂow rates please contact our Services Department. Technical ntc 5B Vari-Level bodies – non-trapped i s 2 Hor Threaded outlet are shown p Connect membranes, where membraneisaboveinsulation) Spec To spec SD602, SD603,SD604 SD402, SD403,SD404 Bod For usew Cast iron Vari-Level bodies Technical Department. Services onﬂowratespleasecontact our For information Code Spec SD402 D0 "S 16 16 – – – – – – – – 50mm 4"BSP 3"BSP SD502 SD404 SD403 D0 75mm SD503 D0 100mm SD504 D0 2"BSP SD602 D0 3"BSP SD603 D0 4"BSP SD604 'A' 78 min. 78 min. i pework bymeansofathreaded p

Apr *80-100 105 max. 81 *80-100 i 105 max. zontal outlet i connecting spigot Cast iron es w i . fy Spec

i l 2018 connecting spigot Cast iron i fy/order i th sp i th grat i n sect i . ons Codefrom thetableabove 2"BSP Outlet i , non-trapped(forsub-surfacedrainagesuchaswithcavity s got outletare ford i eABC B A ze i ngs andaccesscoversshown i 2", 3"or4"BSP on 10 Tel Outlet thread 4" NPSM 220dia. 4" NPSM 220dia. 305 dia. : +44(0)1787 475151 305 dia. thread thread . 238 165 1 145 119 190 1 145 119 8 90 183 – 17 – ––– 'B' 1 17 – – 111 0––17 – – 60 7––17 – – 87

i rect connect 2", 3"or4"BSP i pework adaptor Outlet thread 1 19 – 117 0–18 – 80 7–18 – 67 Fax . : +44(0)1787 475579 Free area 'C' Cast irondrainbody flange (included) Cast ironextension (included) grating/cover Vari-Level collar toaccept Cast ironthreaded gasket (included) clamp withneoprene Cast ironextension (included) membrane clamp Cast ironslotted cm i on toBS416p i gasket (included) clamp withneoprene Cast ironextension Cast irondrainbody flange (included) Cast ironextension (included) membrane clamp Cast ironslotted (included) grating/cover Vari-Level collar toaccept Cast ironthreaded n sect 2 . Deta i ons 5Gand5Vaccessor kg . . . i ...... 7 9 1 ls ofadaptorsforconnect 0 6 6 0 4 2 i pework E-ma Sp SD502, SD503,SD504 He Access covers Opt Grat * Notes Accessor seepage5X2 M Max of grat i l 'A' To specify, statetheSpec.Codeand insulationthickness. accommodated byuseofalonger connectingspigot. thicknessescanbe between 80mmand100mm.Greater forusewithinsulationthicknesses Items shownare : sales@wade 78 min. i i Extra he

*80-100 ; got outlet

ght adjustab 105 max. vers i i ngs n i ons i mum – he i mum – he i ons w –selectfrom Sect i ng/cover (basedon20mmmembrane) i es i ght canbeobta i Typ nt – selectfrom Sect . i co th BSPthreaded outletare forconnect –selectfrom Sect i i . i cal i ng tod . l es shown uk i i i ght ofgrat ght ofgrat ty 4" NPSM i –d 220dia. nstallat 305 dia. thread Web 'B' i i fferent typesands stance betweenbodyﬂangeandtop : www i i i ned bymeansofanextens n sect i on 5G on –seewade i i ng/cover m ng/cover m . wade i on 5X

i . on 5X i on 5V i nt . . co . i i . . nus 10mm nus 30mm uk i i nt zes ofp . co flange (included) Cast ironextension (included) grating/cover Vari-Level collar toaccept Cast ironthreaded (included) membrane clamp Cast ironslotted connecting spigot Cast iron Cast irondrainbody gasket (included) clamp withneoprene Cast ironextension ; . uk/ i . . pework i nstallat i on to i on, i on Vari-Level bodies – non-trapped 5B ntss . 65 s i on, l 2018 i i s a i Apr . . pework shed ﬂoor) i i Optional side inlets up to three at 90° max. 2" BSP Membrane clamping collar (optional) . stance i on – see page 5A1 i uk . nus 30mm nus 10mm i i . co . . on res i nt . i

nstallat . i s recommended and s recommended on 5X on 5V i . i i fied to accept Wade 4" fied to accept Wade nage at membrane level) wade cal i i . i on 9 on 5X i i . gh corros ng/cover m ng/cover m Typ i i i thread 185 dia. 192 dia. on 5G n sect ned by means of an extens : www i i i 4" NPSM – add suffix ‘A’ s dressed below the fin s dressed i stance between body flange and nlet mod i i Web ; th i – d uk ng collar . i ty ght of grat ght of grat i i i es shown l i i co – w . they can be connected to other p they can be connected – select from Sect – select from ; nt i ng/cover i Sect – select from – add suffix ‘C’ ght can be obta add suffix ‘W’ – nage i de supplementary dra Sect – select from – made of grade 316, add suffix ‘M’ i i es Outlet to suit BS 416/DIN 19522/plastic (100mm nominal bore) i

– select from Sect – select from pework ve atmosphere, grade 316 ve atmosphere, mum – he mum – i i i mum – he mum – i ons nlets i 82 n i ngs i 110 O.D. 110 i zontal outlet (BS 416) – deep sump zontal outlet (BS 416) i ght adjustab : sales@wade Extra he see page 5X2. (for use where asphalt (for use where Optional i l i de near dra i 138 i (to prov (to L channel outlet – add suffix ‘LD’ Grade 316 Weepholes top of grat Accessor Max M Asphalt membrane flange S He Membrane clamp Access covers Grat QB214 Hor Opt on, showers and areas where h where and areas on, showers E-ma i 3 1 . . ng an aggress i kg ons 5G and 5V and accessor ons 5G and i 65 . . n sect i . ng food preparat i es i on 10 i : +44(0)1787 475579 red 2 ng pools or hav ng pools or i non-trapped i Add suffix ‘C’ . Optional side inlets up to four at 90° max. 2" BSP Membrane clamping collar (optional) Fax cm nclud i ron BS 416/DIN 19522 and PVC p BS 416/DIN 19522 and PVC ron i mm i Free area area Free n Sect i s requ Outlet to suit BS 416/DIN 19522/plastic (100mm nominal bore) i ons i cat i nless steel gull i on to cast i ng collar i on appl ze i i ons such as sw ons such as i onal sta i : +44(0)1787 475151 t i mm 192 dia. 185 dia. ficat 110 O.D. 110 cat i Tel . i Outlet s ngs and access covers shown ngs and access i rect connect rect i Codes from the table above Codes from ons . i In appl gh spec . i th grat

i on 4 for add

fy/order i n h i i 60 140

fy Spec onal membrane clamp . i i rement es are for d es are i

cal outlet (BS 416) – deep sump cal outlet (BS 416) – i lable on request i i QB214 100 78 2 QB114 100 78 2 Spec Code f opt Note See sect systems by means of adaptors shown systems by means of requ i To spec To For information please contact our on ﬂow rates Services Department. Technical Spec Bod QB114 Vert Connect For use w Stainless steel grade 304, 304, steel grade Stainless Vari-Level bodies Vari-Level For use ava 1

Vari-Level bodies – trapped i 5B tc

; . .

. on, l 2018 BSP i i pework 2" or 3" i Apr . . ll be i shed ﬂoor i on to p i on – see page 5A1 . i . . uk . pework are shown shown pework are i Membrane clamping collar (optional) nus 30mm nus 10mm

i i . co . . ons) ons) i i nlets are trapped) nlets are . nt i i Rodding access plug and seal nstallat i

on 5X on 5V ons may be stacked . i i i zes of p cal fied to accept Wade 4" fied to accept Wade nage at membrane level) wade i i i i . on 5X on 9 ( i i Typ ng/cover m ng/cover m . i i on 5G n sect ned by means of an extens : www i . i i – add suffix ‘A’ – see page 5X3 – add suffix ‘A’ . : Extens s dressed below the fin s dressed i stance between body flange and nlet mod i i on Web i ; thread 185 dia. th 50 ght, but access to trap/plug w i 4" NPSM i – d uk ng collar . i ty ght of grat ght of grat th G102) i i i i Caut es shown l

i i co – w . . – select from Sect – select from fferent types and s types and fferent nt i i

ng/cover i – select from Sect select from – . – add suffix ‘C’ ght can be obta – add suffix ‘W’ nage i de supplementary dra Sect – select from lable w i i n extra he es es i i i i – select from Sect – select from 45 cted mum – he mum – th BSP threaded outlet are for connect for outlet are th BSP threaded i i ng to d mum – he mum – i i i ons nlets th G102 select only 3" throat vers th G102 select only 3" throat vers th G102 select only 3" throat i n i i i ngs i i max. ght adjustab : sales@wade not ava (for use where asphalt (for use where top of grat see page 5X2 to obta Extra he restr Optional i 2" BSP l Optional side inlets up to 3 at 90° i de near dra i i ons w i 6 ‘LD’ channel outlet (not G102) – add suffix Weepholes prov (to S L Asphalt membrane flange

Opt

Max M

Accessor (w Grat (w Membrane clamp He Access covers G2 ser E-ma vers ; 8 6 9 3 5 . . . . . kg ons 5G and 5V and accessor ons 5G and pework i i 2 Outlet to suit BS 416 cm 2" BSP n sect ls of adaptors for connect ls of adaptors i . i Free area Free on to p i : +44(0)1787 475579 red i Deta Fax Add sufﬁx ‘C’ . Membrane clamping collar (optional) . s requ Membrane clamping collar (optional) i Rodding access plug and seal rect connect rect i ng collar i pework adaptor i : +44(0)1787 475151 thread thread 130 dia. 185 dia. 50 3" NPSM 50 4" NPSM Tel ngs and access covers shown ngs and access i got outlet are for d for got outlet are , ‘P’ trapped – 50mm seal – 50mm trapped , ‘P’ i Code from the table above Code from ons . i . 49 ze A B C D E i es th grat s i th sp i i Outlet

fy/order 45 i

on 10 i max.

fy Spec 2" BSP onal membrane clamp . i i es w

Optional side inlets up to 3 at 90° i max. 2" BSP Optional side inlets up to 3 at 90° G304 100mm 205 92 112 no bead 190 78 9 G303 75mm 170 80 87 89 185 44 7 G203 3" BSP 205 95 – – 190 44 9 G202 2" BSP 170 85 – – 185 19 8 Code Spec G102 2" BSP 142 60 – – 140 19 5 6 n sect f opt 5 Connect To spec To Spec G3 ser Bod p of a threaded by means i G102 For use w Cast iron Cast Vari-Level bodies Vari-Level i For information on ﬂow rates please contact our Services Department. Technical tc 5B i

2 Vari-Level bodies – trapped i by meansofathreaded p Connect Spec To spec G1014 G5 ser Bod For usew Cast iron Vari-Level bodies Technical Department. Services onﬂowratespleasecontactour For information i 6 n sect f opt 522 S 7 5 4 98 19 145 – – 150 170 2"BSP G502 Code Spec 533 S 0 6 5 410 44 156 – – 165 205 3"BSP G503 637m 7 5 8 9154 8 44 145 89 87 150 170 75mm G603 11 0m 49 64 – 11 – 78 – 155 – nobead 112 – 165 205 100mm 100mm G1014 G604 and seal access plug Rodding (optional) clamping collar Membrane up to3at90° side inlets Optional 2" BSP Apr max. i es w i i . onal membraneclamp fy Spec i

l 2018 i on 10 i 45 fy/order Outlet i i th sp i s th grat es i 205 eABCDE D C B A ze . i . ons Codefrom thetableabove

i , ‘S’trapped–50mmseal got outletare ford i ngs andaccesscoversshown Tel 111 dia. : +44(0)1787 475151 50 4" NPSM 185 dia. thread 4" NPSM 37 185 dia. thread i pework adaptor i ng collar i rect connect i s requ plug andseal Rodding access 3" BSP Fax (optional) clamping collar Membrane 3 at90° inlets, upto Optional side

. 2" or 51 . Addsuffix‘C’ Deta 2" BSP max. : +44(0)1787 475579 i red i 170 on top Free area i . i ls ofadaptorsforconnect n sect cm 2 i i pework ons 5Gand5Vaccessor kg . . . . . 8 6 0 5 0 ; vers E-ma S G6 ser Membrane clamp Access covers Weepholes Asphalt membraneflange Accessor Grat seepage5X2 He Extra he M Max topofgrat Opt L (to prov channeloutlet(not G102)–addsuffix‘LD’ 6 i i l ons w i : sales@wade i near dra de up to3at90° side inlets Optional i obta Optional (for usewhere asphalt restr 2" BSP ght adjustab max. i i ngs i n i nlets ons i i i mum – he ng tod i i i th BSPthreaded outletare forconnect mum – he cted n extrahe 45 –selectfrom Sect i i es es i i –selectfrom Sect de supplementarydra i nage – addsuffix‘W’ ght canbeobta –addsuffix‘C’ . i nt – selectfrom Sect i ng/cover

i . fferent typesands co –selectfrom Sect . –w i i . Outlet tosuitBS416

l es shown uk Caut i i i i ght, butaccesstotrap/plugw ght ofgrat ght ofgrat ty i ng collar 4" NPSM –d i 50 185 dia. th thread Web ; i on i i nlet mod stance betweenbodyflangeand i : www s dressed belowthefin : Extens –addsuffix‘A’ –seepage5X3 i i . i ned bymeansofanextens n sect on 5G i i ng/cover m ng/cover m Typ . . wade i i on 9( on 5X i i i i nage atmembranelevel) fied toacceptWade 4" cal zes ofp i i i . ons maybestackedto on 5V on 5X i nt i nstallat i . . nlets are trapped) co plug andseal Rodding access . . (optional) clamping collar Membrane i i . nus 10mm nus 30mm uk i pework are shown i . on –seepage5A1 i on top i ll be i shed floor) . . i pework i on, .

. . 3

Vari-Level bodies – trapped i 5B tc .

. on, l 2018 i i Apr . . . . on – see page 5A1 i . . uk . on 5G ls of adaptors for ls of adaptors 3" or 4" BSP outlet thread i i nus 10mm i . co . . ons) ons) Code i i . nlets are trapped) nlets are nt . i i nstallat i Deta Membrane clamping collar (optional) . on 5X on 5V i i cal nage at membrane level) wade i i . on 9 ( on 5X i i Typ ng/cover m ng/cover plus 10mm . i i pework n sect ned by means of an extens i : www i i stance between body ﬂange and i Web . thread 235 dia. 4" NPSM – d th 4" throat from Sect from th 4" throat i uk ng collar . i ty ght of grat ght of grat i i i es shown l i i co . . – select from Sect – select from nt i

ng/cover i Sect – select from – see table for collar Spec ght can be obta – add sufﬁx ‘W’ i de supplementary dra Sect – select from i es es i i – select w . mum – he mum – i mum – he mum – i ons nlets th H102 select only 3" throat vers th H102 select only 3" throat vers th H102 select only 3" throat i n i i i ngs i Optional side inlets up to 3 at 90° i ght adjustab : sales@wade Extra he Optional i l on 10 2" BSP max. 2" BSP i i de i Weepholes see page 5X2 Accessor top of grat Max M S (to prov (to Opt Access covers (w (w Grat Membrane clamp He E-ma n sect i pework by means of a threaded p means of a threaded pework by i 6 4 4 7 . . . . . kg red i Collar ons 5G and 5V and accessor ons 5G and i on to p i s requ i Membrane clamping collar (optional) n sect i 2 outlet 4" BSP : +44(0)1787 475579 cm pework are shown pework are i Free area Free Fax ng collar i thread 4" NPSM zes of p i Membrane clamping collar (optional) ze i s Outlet : +44(0)1787 475151 thread 4" NPSM thread 190 dia. Tel Code from the table above and add Code from 3" NPSM . onal membrane clamp i J2 4" BSP 78 19 ngs and access covers shown ngs and access H1 2" BSP 19 7 H2 3" BSP 44 17 H2 4" BSP 78 16 . i . . . fferent types and s types and fferent i , ‘P’ trapped – 100mm seal – 100mm trapped , ‘P’ Collar ons Spec f opt i i Code th grat ng access . i i

fy/order ng to d i i Body

Code fy Optional side inlets up to 3 at 90°

i . Optional side inlets up to 3 at 90° es have BSP threaded outlet and are for connect for and are outlet threaded es have BSP

i The close proximity of grating and access cover preventsThe close proximity of grating and access the adjacent use of the widest versions. The inlet closest to the outlet is not trapped; select sealed access covers only and ensure that the access cover is installed closest to the outlet. th rodd 2" BSP max. 2" BSP 1.5" BSP max. 1.5" BSP i H102 C Spec Body H203 C H204 C J204 C Connect Notes 1. 2. Bod connect H102 H2 ser For use w Cast iron Cast Vari-Level bodies Vari-Level To spec To Spec Spec For information on ﬂow rates please contact our Services Department. Technical W J204 tc 5B i

4 Vari-Level body assembly – trapped sect The bodyhasasp Connect Maximum flowrateof1l/s (with fullbore accesstopipework) Spec To spec Rodd GC144 For usew Cast iron Vari-Level bodyassembly plast see page5C2foralternat 2. 1. Notes Technical Department. Services onflowratespleasecontactour For information Body C4 C GC144 Apr waste materials are present. waste materialsare highamountsofhairand other very applications where in cleaningofthebottletrapwillbenecessary Frequent applications (max.flowrateof1l/s). This bodyassemblyisdesignedforlowvolumedrainage Spec i on 10 i i c bottletrap i

fy i ng accesstop l 2018 . Body Code i fy/order i Collar

th grat . . i 100 C and ons bodywithplasticbottletrap–50mmseal i ngs andaccesscoversshown Outlet . Collar s Tel i got outletford i ze i : +44(0)1787 475151 pework Spec (100mm) /Plast BS 416/DIN19522 i ve membraneclamp i s v . Codefrom thetableabove P system i i pework a removable, i rect connect i c (110mm) Fax : +44(0)1787 475579 i ng collars i on top i n sect Free area cm 011 20 2 i i ons 5Gand5V(4"throat vers pework . ;

kg . 1 . Deta E-ma Membrane clamp (to prov S He Grat Access covers Opt Weepholes collar Spec M Max topofgrat Accessor i l i : sales@wade i ls ofadaptorsforconnect de i Required grat see page5X2 Extra he obta ght adjustab i i ngs i n i nlets ons i i mum – he i ng/cover tothebody)–seetableforstandard 4" throat i mum – he n extrahe –selectw i es i –selectfrom Sect de supplementarydra i – see page5C2 ght canbeobta i (membraneclamp nt – selectfrom Sect i ng/cover . . Codeorrefer topage5C2foralternat co –selectw i . ons only)andaccessor i .

l uk Caut i i i i ght, butaccesstotrapw ght ofgrat ght ofgrat ty i ng collar i th 4"throat from Sect –d Web ; i on i stance betweenbodyﬂangeand : www i : Extens th 4"throat from Sect i i ng tootherp ned bymeansofanextens i i Typ . ng/cover plus15mm ng/cover m . i wade i i ng collaralsoconnectsthe on 9( on 5X i i cal nage atmembranelevel) i ons maybestackedto i nt i nstallat i . . nlets are trapped) co i es shown i i . pework are shown nus 30mm uk i on 5G i ll berestr i on –seepage5A2 i . on 5V . i n sect . i i ves cted . i on, . i on 5X . . . i n . 5

Vari-Level body assemblies – trapped i 5B tc . n i nus . i on 5X i on, l 2018 i i . Apr ll be i n sect i . on 5V . . i ng) on – see page 5A2 i i uk . on 5G i nus 30mm (or m i co es shown pework are shown pework are . i i nt . i nstallat i . ons may be stacked i nage at membrane level) wade cal i . i on 9 on 5X ng collar also connects i i i s ﬁtted to grat i . ng/cover plus 10mm ng/cover m Typ i i ned by means of an extens : www i th 4" throat from Sect from th 4" throat ng to other p ng to other : Extens i i stance between body ﬂange and top i Code or refer to page 5C2 for Code or refer on . Web i – d ght, but access to trap/plug w i th 4" throat from Sect from th 4" throat i uk ty ng collar . ; i i ght of grat ght of grat i i l . Caut i

co ons only) and accessor ons only) and . . i – select w nt . i Sect – select from (membrane clamp . ght can be obta – see page 5C2 i ng/cover to the body) – see table for standard ng/cover to the body) – see table for standard de supplementary dra Sect – select from ves i n extra he i es i i i ng/cover i f UP701 ﬁlter bucket – select w i cted mum – he mum – i ally below) i mum – he i i ons nlets i n i ngs i i ght adjustab : sales@wade 8mm see page 5X2 to obta M the grat collar Spec 4" throat alternat (up to 2" are completely above the water level over 2" are water level over 2" are completely above the (up to 2" are part Required restr i l i de i ls of adaptors for connect ls of adaptors Extra he Extra

of grat of He Max

Weepholes

(to prov (to Opt Access covers Membrane clamp Grat Accessor S i E-ma Deta 3 3 . . . kg

; . ng i ons 5G and 5V (4" throat vers 5V (4" throat ons 5G and i pework 2 i . 78 17 cm Free area Free n sect i ng collars i on to p i : +44(0)1787 475579 Fax nless steel trap i c (110mm) i a a removable, expand a a removable, rect connect rect pework i i i system P Code from the table above Code from . s v i ve membrane clamp i BS 416/DIN 19522 (100mm)/Plast Spec : +44(0)1787 475151 pework i Tel ze i s Collar got outlet for d got outlet for Outlet i ngs and access covers shown ngs and access i body with stainless steel bell trap – 50mm seal seal – 50mm trap bell steel stainless with body

ons and D 100 BS 437 78 17 D 100 i . . s ﬁtted to the secured sta s ﬁtted to the secured i es . i th grat Collar i

fy/order ch i Code Body i . ng access to p fy

i i on 10 es have a sp

i i Spec GD164 C GD144 C Body Connect (with full bore access to pipework) to pipework) access bore (with full see page 5C2 for alternat For information on flow rates please contact our Services Department. Technical Rodd To spec To Spec plug wh GD ser For use w Cast iron Cast Vari-Level body assemblies body Vari-Level Bod sect tp 5B Vari-Level body assemblies – trapped 104 collar Select Spec To spec 4. Maximum continuous operating temperature of75°C. Maximum continuousoperatingtemperature 4. 3. 2. 1. Notes Technical Department. Services onflowratespleasecontactour For information membrane clampingcollar 50mm seal GP1104 50mm seal GP312 ABS plastic Vari-Level bodyassemblies Connect GP614 bodyhasa110mmsp GP312 bodyhasa50mmsocketoutletforsolvent-weldconnect GP1104 bodyhasa110mmsp solvent-weld reducer foropt For usew at 90˚ i Opt nlets, upto3 P1 0Plast 50 GP312 P1410BS416/Plast Plast 110 110/50 GP1104 GP614 Code Spec d Removable 78 i and other waste materials are present. and otherwaste materialsare highamountsofhair very inapplicationswhere be necessary cleaning will applications (max.flowrateof1 l/s).Frequent designedforlowvolumedrainage GP312/GP614 are membrane clampingcollar. membrane (orbodyifno isbeingused)and awatertight jointbetween A gasketissuppliedtoensure with 4"throatissuppliedtosuit. also connectingthegrating/cover tothebody;aversion adualpurpose by The membraneclampingcollarserves Apr p tube i d Removable onal s 56 d i p tube . i

i Gasket l 2018 s 50 i a i i ncluded) fy/order i . de i

th grat . Codefrom thetableabove(membraneclamp i s ons Outlet i ze mm secur Membrane clamp i ngs andaccesscoversshown . Tel bucket Removable , trapped–50mmsealcomprisingbodyand i 4" NPSM 4" NPSM ng studs : +44(0)1787 475151 220 d thread 187 d thread i i a a . . P i onal connect system i i pework got outletforsolvent-weldorr i i c140 c140 i got outletforsolvent-weldorr 'O' r 50 134 clamp Membrane ( i i ncluded) ng seal i c67 0 Gasket i ng collar Fax clamp Membrane collar ( i on to50mmplast 56 d 110 d Free area : +44(0)1787 475579 cm i i a i ng ncluded) . i (Invert) i n sect a 2 105 . 71 202 i ons 5Gand5V(4"throat vers kg i . . . ng 6 6 6 i c p i ng-seal connect i ng-seal connect E-ma i pework i on to50mmplast 157 He 50mm seal GP614 M Max GP1104 ser M Max GP312/GP614 topofgrat ser Grat Access covers Opt S Accessor Weepholes

i l : sales@wade i de 103 i extens Extra he in theGP1104. GP Ser tube/bucket w stacked toobta are enabledbyknockouts 3 solvent-weldsp Cast ght adjustab . i i i ngs i n n i nlets (untrapped) ons Gasket i i u –he mum mum – he i i mum – he mum – he i ron extens –selectw i 50 i i on seepage5X2 i on to110mmplast es es bod i i –addsufﬁx‘W’ ght canbeobta on to110mmplast i nt – selectfrom Sect i ng/cover . i co i –selectw es c p i ons only)andaccessor i . i l i uk ll berestr i es i i i i ght ofgrat ght ofgrat ght ofgrat ght ofgrat ty i i n extrahe i pework i ons are notsu th 4"throat from Sect . –d i gots toconnect50mmplast i Web 4" NPSM es 110 d 220 d ; thread 56 d –(GP1104only) i stance betweenbodyﬂangeand : www i th 4"throat from Sect . . i i i i i

a cted a a ned bymeansofaUP104 Caut . . . . i i i i i Typ i . ng/cover plus10mm ng/cover plus10mm ng/cover m ng/cover m

ght, butaccesstotrapd c p Note: i c p . wade i . on 5X i i i cal pework and on i i table forusew pework Side inlets are nottrapped Sideinletsare i : Extens nt i nstallat bucket Removable . . d Removable co i i p tube es shown . i i . ( clamp Membrane nus zero nus 5mm uk i i ncluded) . on 5G i i on –seepage5A2 ons maybe i i s suppl ng collar i . on 5V i th . . . i n sect . i c p i ed w i . p i pework i on 5X i th a . Vari-Level body assemblies – trapped tss 5B . . . 65 on 5X i s

i . on, l 2018 i i . s a i Apr . . n sect i pework shed floor) i i ll be on 5V i . i Rodding access plug and seal Membrane clamping collar (optional) Optional side inlets up to three at 90° max. 2" BSP stance i on – see page 5A2 i uk . on 5G Fixed trap (included) i nus 30mm nus 10mm i i es shown co i . on res i nlets are trapped) nlets are nt . i i nstallat i nless steel, add suffix ‘M’ i s recommended and s recommended ons may be stacked to i i . fied to accept Wade 4" fied to accept Wade nage at membrane level) wade cal i i . i on 5X on 9 ( i i 60 . gh corros ng/cover m ng/cover m Typ i i i ned by means of an extens : www i – add suffix ‘A’ th 4" throat from Sect from th 4" throat i s dressed below the fin s dressed : Extens i thread 192 dia. 185 dia. stance between body flange and nlet mod i 4" NPSM i on Web i ; th i – d th 4" throat from Sect from th 4" throat i uk ng collar . i ty ght of grat ght of grat ght, but access to trap/plug w i i i i Caut l ons only) and accessor ons only) and i co i – w . they can be connected to other p they can be connected – select w ; nt i ng/cover i Sect – select from . – add suffix ‘C’ ght can be obta add suffix ‘W’ – nage i de supplementary dra Sect – select from – made of grade 316 sta i i es

i – select w n extra he cted pework ve atmosphere, grade 316 ve atmosphere, mum – he mum – i i i i i mum – he mum – i ons nlets i n i ngs 110 O.D. 110 i 111 i zontal outlet (BS 416) – ‘P’ trapped zontal outlet (BS 416) i ght adjustab Outlet to suit BS 416/DIN 19522/plastic (100mm nominal bore) : sales@wade obta restr (for use where asphalt (for use where Extra he see page 5X2. Optional i l i de near dra 256 i i Grade 316 channel outlet – add sufﬁx ‘LD’ (to prov (to L

Accessor Asphalt membrane ﬂange

top of grat M Max He Weepholes Opt Access covers Membrane clamp QG214 Hor Grat S on, showers and areas where h where and areas on, showers E-ma i ng an aggress i 5 8 . . ons 5G and 5V (4" throat vers 5V (4" throat ons 5G and i . 65 n sect . ng food preparat i i on 10 i type kg Trap : +44(0)1787 475579 red ng pools or hav ng pools or i trapped – 60mm seal 60mm – trapped i Add sufﬁx ‘C’ . Fax nclud i ron BS 416/DIN 19522 and PVC p BS 416/DIN 19522 and PVC ron i mm i n Sect Optional side inlets up to four at 90° max. 2" BSP Removable upstand Membrane clamping collar (optional) i Rodding access plug and seal Bell trap assembly s requ i ons i cat 2 i Gasket seal Outlet to suit BS 416/DIN 19522/plastic (100mm nominal bore) cm on to cast i ng collar Free area area Free i on appl i ons such as sw ons such as i : +44(0)1787 475151 ﬁcat cat i Tel . i ze i thread 192 dia. 185 dia. ngs and access covers shown ngs and access 110 O.D. 110 i rect connect rect 4" NPSM i mm Codes from the table above Codes from ons . i In appl Outlet s gh spec . i th grat

fy/order n h i i 60

fy Spec onal membrane clamp . i i rement es are for d es are i

cal outlet (BS 416) – bell trapped cal outlet (BS 416) – i lable on request i 90 i 186 QG2143 P 60 100 QG114 100 51Bell 2 Code Spec f opt requ i Note See section 4 for additional stainless steel gullies. To spec To Spec For information please contact our on ﬂow rates Services Department. Technical QG114 Vert Connect For use w Stainless steel grade 304, 304, steel grade Stainless For use Vari-Level body assemblies body Vari-Level systems by means of adaptors shown systems by means of ava Bod Vari-Level membrane clamping collars 1 5C l 2018 i SLAB

SLAB GASKET Apr GASKET D10 .

MEMBRANE CLAMPING COLLAR STRUCTURAL GRATING/ COVER STRUCTURAL C onal, standard onal, standard C VARI-LEVEL BODY GULLY i . GRATING/COVER VARI-LEVEL BODY GULLY STRUCTURAL SLAB STRUCTURAL C th i uk th . i DAMP PROOF MEMBRANE DAMP co DAMP PROOF MEMBRANE DAMP . nt i ng collar i ng collar ng collar es body w i i i wade body and opt GRATING/COVER . es body w i ser FLOOR SCREED : www ser VARI-LEVEL GULLY BODY GULLY G304C C D10 MEMBRANE OPTIONAL MEMBRANE OPTIONAL CLAMPING COLLAR COLLAR Web CLAMPING MEMBRANE FINISHED FLOOR FINISHED FLOOR FINISHED FLOOR OPTIONAL SIDE INLET uk . gure 3: gure gure 1: gure 2: gure i i i co 4" membrane clamp membrane clamp F F F membrane clamp . nt i suitability of a drain assembly in a particular application. suitability of a drain assembly to imply that they must be used in this way. There are many this way. they must be used in to imply that These typical installation drawings serve installation drawings These typical general to illustrate the variations of ﬂoor build up and it is for the end user to determine ﬂoor build up and it variations of : sales@wade l i principle of how such assemblies are how such assemblies principle of used. These are not intended E-ma es, i . t i

. . nlet i nlet ls of i i ng used) i The . ch serves i se, a gasket i (figure 3) (figure s be ng collar are ng collar are i i nt between i : +44(0)1787 475579 ned to produce ned to produce i des deta i ate membrane Fax i ons such as: -Level gully bod i i . ng collar to su ng collar must be i ght jo ng collar Spec i i th a threaded th a threaded i red gully body and red ng collar . i (figures 1 and 2) (figures i i t a standard Wade 4" Wade t a standard i ng collar wh ncludes a damp-proof ncludes a damp-proof fied otherw i i ng the membrane and i i red thout a threaded thout a threaded i onal extra, to be i i de supplementary nstallat es w i i on i ng/cover, the membrane ng/cover, i i ng collar th both 4" and 3" throat th both 4" and 3" throat i i es and prov i f no membrane i es w cat ng/cover to the body i i i ng collar i cular ned to su i th the requ i i s an opt i : +44(0)1787 475151 ng collars are mach ng collars are ng collars are components used to components ng collars are i i Tel Unless spec . Select the appropr t part . ng the grat i i . f the appl i ng the grat ate membrane clamp ed to ensure a watert ed to ensure sts membrane clamp i i i i -Level gully bod i table for use w ng collar i i fy fied to go w fied re a membrane clamp re i i i i onal membrane clamp nage at membrane level ng/cover

i i i -Level gully bod ng collar from the table to ﬁt the gully body and ng collar from i fferent types of membrane clamp types of membrane fferent th throat mach th throat th weepholes to prov i i ons to su i i i ons ng/cover assembly requ ngs/covers channel outlet w w dra lable: i i i s suppl

at i appropr spec membrane (or body grat i connect and membrane clamp requ Var the dual purpose of clamp Membrane clamp membrane spec clamp for connect For Var Opt i ) ) ii i ( W – grat collars su grat clamp ( var Membrane clamp Opt Codes by gully body ser To spec To Page 5C2 l Note Some membrane clamping collars are reversible (ﬁgure 1), thereby increasing the height adjustability Height adjustability of grating/cover above the body. dimensions shown on gully body pages in section 5B allow for the full range of adjustability using reversible collars either way up as necessary. All membrane clamping collars include stainless steel fasteners to connect to the gully body. secure a damp proof membrane to a gully body membrane a damp proof secure a range of Var manufactures Wade clamp and each has a membrane d Two ava

Membrane clamp Vari-Level membrane clamping collars clamping membrane Vari-Level

L – L 2 5C Vari-Level membrane clamping collars † * Application chart Vari-Level membraneclampingcollars (see page5X2). Vari-Level grating/cover isusedwithaG1orH1seriesbody U201 used inVari-Level bodies/adaptorswith4"inlet(seepage5X2). U1101 G2-G10 ser H102 G1 ser GD ser GC144 GP ser B504 ser Body C ser H2 ser D10-D12 ser D2-D7 ser J204 QB ser QG ser Apr i es i i 4" NPSM to 3" NPSM extension is required ifa4"throat 4"NPSMto3"extensionisrequired l 2018 es i i i reducing bushenables3"throatgratings/coverstobe reducing i i es i saddsuffix‘ es es sAddsuffix‘ es es sAddsuffix‘ es i es i saddsuffix‘ es i es (not sealed) C C C C C C a body, membraneclampingcollarandgasket This seriesissuppliedasanassemblywhichincludes C For usew C C C C C C C C C C grat Tel ...... D10LW H1 CW C DW D B CL CW C DL DW D H2 D10W D10 J2 : +44(0)1787 475151 (opt –standard 4"throat vers –standard 4"throat vers –standard 4"throat vers –standard 4"throat vers (opt i (opt (opt –acceptsWade 114d –acceptsWade 114d ng/cover – – – – –standard 4"throat vers i i i i i – onal) ncludes weepholes(notsealed) ncludes weepholes(notsealed) ncludes weepholes(notsealed) ncludes weepholes(notsealed) i i i –acceptsWade 114d onal) onal) and onal) i C C C C ncludes weepholes(notsealed) i ’ tobodySpec ’ tobodySpec ’ tobodySpec ’ tobodySpec th 4" Membrane clamp throat Var U201 Fax † : +44(0)1787 475579 . . . . Code(opt Code(opt i i Code(opt Code(opt a a i i i i on (gasketed) on (gasketed) on (gasketed) on (gasketed) . . channeloutlet(notsealed) channeloutlet(notsealed) i on (gasketed) i i a -Level . channeloutlet i i i i onal), andU201 onal) nl Addsuffix‘ onal) onal) i ng collarSpec E-ma are notsuppliedwithagasket. are Versions withweepholes(W)orforuseWade channel(L) Note i l : sales@wade † Addsuffix‘ C C body series) (3" throatgratings/coverscannotbeusedwiththis Not applicable use withthisbodyseries) for notrecommended (3" throatgratings/coversare Not applicable body series) (3" throatgratings/coverscannotbeusedwiththis Not applicable body series) (3" throatgratings/coverscannotbeusedwiththis Not applicable C For usew C C C C C C C use withthisbodyseries) for notrecommended (3" throatgratings/coversare Not applicable grat ...... D10 D10W B H1 DW D C3 H2 CW3 J2 i nt (opt and (opt i . (opt –standard 3"throat vers (opt co ng/cover and and – . . Codes U1101* i uk onal) and and i i i i onal) and ncludes weepholes,3"throat (notsealed) onal) onal) and U1101* U1101* C C i Web U1101* ’ tobodySpec ’ tobodySpec th 3" –standard vers : www – U1101 –standard vers U1101 throat Var U1101 i – ncludes weepholes(notsealed) . wade i ncludes weepholes(notsealed) * * * . . i Code(opt Codeand nt . i co on (gasketed) i . i on (gasketed) uk -Level i on (gasketed) i onal) U1101 * Vari-Level gratings 5G l 2018 i Apr uk . VARI-LEVEL ADAPTOR OR BODY (G SERIES SHOWN) co . nt i L2106 GRATING wade . : www Web uk ng i . on co i . nt i SLAB DAMP PROOF cal Installat i STRUCTURAL FLOOR nless steel grat i : sales@wade l SCREED MEMBRANE i Typ L2106 Sta E-ma

; on i n i th ty i les, gh i i i ficat also i on at ; . i on, ble sheet i i nyl t i . an areas i ety of i . gh qual ng i i : +44(0)1787 475579 th flex rement s for use w c or v nstallat n, carpet or gh spec i i i i i i i ses separate shes on for the i i Fax ty and to obta t a var i ght adjustable shed floors i i i i l i n h . i n pedestr b on floor i i i shment projects to shment projects

t i i . . es by means of K2401 s a requ i ; i n unfin ng ceram nformat i ve range of h i i ng food preparat ons i tecture i i s for use w i nyl i i als as follows: lable to su i ngs are he ngs are i on 5X i i – for use es – for use i nclud stance i nclud mens i i i ors, terrazzo, res etary gull i i ed compos on or refurb : +44(0)1787 475151 i i od arch i – for use n Sect Tel ty d n plant rooms and car parks n plant rooms i ons i i shes i l i i ngs may also be connected to on res i i K23 ser ron ; i ng such as v cat ons are ava ons are i i i ch complement floor fin ch complement floor nless steel fferent mater fferent i i i son cells, showers and areas where h where son cells, showers and areas ckel bronze

i i . on of the catalogue compr i such as Cast appl floor fin vers Sta trowel appl trowel floor marble, pav N match per for restorat pr corros wood

i ngs wh i

-Level grat -Level threaded grat -Level threaded i i s sect ght adjustab i i th a fine thread to enable accurate to enable th a fine thread pework and propr i i adaptors shown p Var he Please refer to the product to the product Please refer floor level compat ensure selected body to grat Wade offers a comprehens offers Wade

For use with bodies shown in section 5B, membrane clamping collars shown shown collars clamping membrane 5B, section in shown bodies use with For section 5X in 5C and accessories in section Vari-Level gratings Vari-Level w Var 5G c pages for d Th 5G ss 5G nb Note Direct connection gratings, shown in Section 6G, are for use where a gully body is not required; they look identical to when installed, but are gratings machined to enable Vari-Level direct connection to pipework using proprietary couplings. c 5G i Vari-Level gratings to matchper Standard c K2103 C For usew Connect For use Cast iron –BSEN 1561 Vari-Level gratings Sherardized, matt ﬁnish Technical Department. Services onﬂowratespleasecontactour For information Code Spec 20 I15–5 87K 1 K3 7 58 4 54 – 155 K2103 CI 20 7 048 1L51 L15 11 85 4 60 – 176 K2501 20 I10105 01 32 K3 14 60 4 57 150 150 L2501 CI 20 5 5 745 1 1 L15 7 55 4 57 150 150 L2601 Apr . i

l 2018 i n i th bod unﬁn i rcular grat d ][ i i od arch i ons

a . /w Overall i shed i es shown i dth mm Tel i : +44(0)1787 475151 tecture ﬂoorssuchas i ng i n sect . length mm Overall L K2501 i on 5B,membraneclamp i ght veh i n serv

Fax i

cular trafﬁcareas i : +44(0)1787 475579 ce andpark he Overall i ght mm i ng areas andplantrooms i ng collarsshown d E-ma i a Throat .

i nches Decorat L2501 C buckets, removable bottletrapandhe See sect H A Sufﬁx Opt (for use i l : sales@wade

F Asphalt membraneclamp(sta i tted w i ons i ve ﬂoralpattern i on 5Xforarangeofaccessor i n sect i i th P n asphalt/compos ][ i area cm nt

; Free . alsoforrestorat co i n Torx screws forsecur i on 5Candaccessor . uk 2 Web : www Max w i i t . dth mm aperture i . on ﬁn i wade on orrefurb i nless steel) L L2601 i ght veh i nt i i shed ﬂoors–K2501only) es shown i . ght extens co i es i ty appl . uk i

nclud i cular trafficareas i rat shment projects i i gcaskg ng class Load cat i i n sect ng filter i ons i ons . . i on 5X . . . . . 7 8 3 7 . Vari-Level gratings 5G nb 1 . 2 1 7 2 4 4 3 7 ...... kg l 2018 pheral pheral i on 5X i i 2 i ng i rect rect rect rect . i i Apr cm area area Free Free nd nd i i n guard n guard ons i i i th per th per ng filter i i n sect i i ple ple w w es have i i i ; ; uk nclud . i pes pes below Depth i i FFL mm co . ble sheet floor es

i i ght extens nt i i es shown i es i cover and verm L2803 take mult To waste p cover and verm K3302 take mult To waste p wade . th flex nyl i i a x 96H 72 48 3 : www i a x 101H 53 23 2 a x 101H 60 12 3 a x 101H 48 12 3 i i i Overall ze above FFL mm i s Web For use w such as v K23 ser uk an traffic (K23 and K34 ser an traffic (K23 . i rect waste rect rect waste rect i i on 5C and accessor co i

. . a 222L x 82W x 96H 72 42 4 a 101 d a 108 d a 101 d a 222L x 82W x 96H 53 42 3 a 222L x 82W x 96H 60 21 4 i i i i i i nd nd nt i i i pheral cover pheral cover i i ze at i n sect s Overall i n guard n guard FFL mm ngle ngle i i on 5X for a range of accessor i i i ng not th per th per i i i

. n channels w w i ; ; : sales@wade l i pe pe i i K2601 176 d K3301 150 d K2701 176 d K3401 176 d K3302 150 d L2801L2803 150 sq 150 sq 101 d 222L x 82W x 96H 57 21 4 K3402 176 d Spec Code For information on ﬂow rates please contact our Services Department. Technical and verm and verm See sect bottle trap and he buckets, removable L2801 take s To p K3301 take s To p E-ma gh volume of pedestr gh volume i 9 1 0 2 5 5 0 0 0 th h ...... ng collars shown i i ng i sk of blockages K2101,

; ; pes – ng i i K2103 ; nyl rect waste rect Load ons class kg i rat i i ble sheet i rect waste connector (grat rect nd i i pheral grat cat i i

. K2301 may be ted to areas w ted to areas : +44(0)1787 475579 i ; K2201 Ind K3101 secured) Reduces r 30mm Removable dome protrudes th flex i ngle i pheral cover and Fax Max dth mm i th per i i ty appl aperture i w on for waste p n guard i i w ng such as v i ; on i t th per i 2 cularly su pe i i es to K2103, K2401 i on 5B, membrane clamp i i w verm floor K3402 For use w K2701 take s To p (funnel not secured) cm area area Free Free . n floors i

. n sect . i a . i 4 45 16 L15 1 rect connect rect i d nches ed compos Throat i i : +44(0)1787 475151 pheral

K2302 may be tapped 2" or 3" i shed and part ; ; i Tel rect rect i de a d ght i 5" i dome 78 nyl . . i ron frame) ron mm es shown i ble sheet nd i n Torx screws for secur screws n Torx he i i i Overall nc i th per i led or epoxy res i ons ze BSP, 1" or 2" (appl ze BSP, i ple w i es th P i ; i i ze i th bod th ﬂex th trowel appl th trowel th t

mm i i i i s fy s

pheral cover and i Overall pes 4mm ﬂange depth zed cast i i i . ons

. n guard tted w i i ng ng such as v i i i

ng (funnel not secured) i Tapped to prov Tapped may also be tapped 3") tapped 1" or 1 K2102 and K2303 may be tapped 1" only spec (not K2201, K2601 or K2701) F th per i K3101 135 K2401 152 53 4 58 6 L15 1 K2303 250 58 4 106 6 L15 4 K2302 176 60 4 48 6 L15 2 K2301 142 54 3 32 7 L15 1 K2201 176 72 4 73 7 L15 2 K2103 152 53 4 58 6 L15 1 K2102 135 55 3 40 6 K3 1 K2101 135 48 4 40 6 K3 1 Spec Code

w verm floor Satin finish For use w Connect For use w K3401 floor K2601 K2401 For use w For use w K21 ser

Nickel bronze – BS EN 1982 BS EN – bronze Nickel Vari-Level gratings Vari-Level sherard Durable, superbly fin Durable, superbly To take mult To waste p grat ][ Opt H nb 2 5G Vari-Level gratings Decorat L2501 ceram Contoured tomatchRuabon L2407 ceram Contoured tomatchJohnson4200 L2402 For usew L21 ser For usew Connect Nickel bronze –BSEN1982 Vari-Level gratings Satin finish Durable, superblyfin 50 5 5 544 1 2 L15 4 44 4 55 150 150 L5401 50 5 5 544 1 2 L15 4 44 4 55 150 150 L5301 30 6 6 049 1 2 L15 7 92 4 60 161 161 L3001 20 5 5 746 3L52 L15 13 60 4 57 150 150 L2501 20 5 5 039 1 2 L15 6 90 3 70 150 150 L2409 20 5 5 148 1 2 L15 6 81 4 71 150 150 L2408 20 5 5 339 1 2 L15 6 92 3 73 150 150 L2407 20 5 5 549 1 2 L15 6 90 4 75 150 150 L2406 20 5 5 039 1 1 L15 6 90 3 70 150 150 L2404 20 1 1 833 1 1 L15 6 32 3 58 115 115 L2402 20 5 5 844 1 1 L15 6 40 4 48 150 150 L2301 20 2 3 04156L55 L15 6 155 4 70 430 125 L2202 20 0 0 736 1 1 L15 8 66 3 57 204 102 L2201 20 0 0 04168L53 L15 8 156 4 70 201 201 L2104 20 5 5 748 1 1 L15 8 82 4 57 150 150 L2103 20 3 3 346 1 1 L15 6 60 4 53 135 135 L2102 Code Spec 20 0 0 533 30 K3 6 30 3 45 101 101 L2101 Apr . i

i i l 2018 c t c t Overall i w ve ﬂoralpattern mm i i i le le i i dth th t th bod i es i ons i led orepoxyres Overall length mm i es shown Tel i : +44(0)1787 475151 shed andpart Overall he mm i ght i n sect i Throat nches i d n ﬂoors i a .

i on 5B,membraneclamp i cularly su Free area cm 2 Fax w aperture : +44(0)1787 475579 i dth mm Max H L3001 ceram Contoured tomatchKeram L2408 Wool Contoured tomatchP L2404 Rectangular L22 ser i ted toareas w

i nged .

i scroft 2302/Ga i c t rat ls kg class Load i le i ng i es i i ng collarsshown th h ...... 6 6 3 1 0 3 0 0 9 5 3 6 8 9 9 7 9 E-ma i gh volumeofpedestr i l 4420ceram i ][ H Opt buckets, removable bottletrapandhe See sect lk i

l : sales@wade i ngton/ F (not L3001)

(L2301 only–1"BSPs Tapped toprov i i c i tted w ons i on 5Xforarangeofaccessor i n sect i th P i i nt c t . . co i le i i n Torx screws forsecur on 5Candaccessor . uk i i an trafﬁc de ad Web 4420/54420 ceram Contoured tomatchStrataBuchtal L2409 ceram Contoured tomatchPlatt2300 L2406 Square framed L2301 Grat L5301/L5401 L5401 vers i rect connect : www i i ze ava ng concealedbysol . i c t . i wade le i i on hassealedcover lable) i nt i es shown i . ght extens i i co on forwastep es . i ty appl . i uk c t i nclud i le i i cat d h i i n sect ng ﬁlter i ons i i ons nged cover . i pes i on 5X . .

Vari-Level gratings 5G ss 1 . ed i s i l 2018 i on 5X 6mm i s a . pes – i i . ons Apr i ng i ons K23 and i ; ng filter cat n sect i i . i stance i . th trowel appl th trowel on floor i uk i nclud . t i i ty appl i co . on res es on for waste p i i i ght extens nt i i ron frame) ron es shown i i s recommended and s recommended es to K2107, K2307 i i compos flange depth K2407 For use w wade .

. gh corros i zed cast : www i nless steel (not K1807 shed as standard) i rect connect rect i i Web s pol i . uk de a d . i nyl i on 5C and accessor ble sheet co n Torx* screws for secur screws n Torx* i i . i nt i ze BSP, 1" or 2" (appl ze BSP, i . th P es have sherard i i n sect th ﬂex i

on 5X for a range of accessor fy s i i ve atmosphere, grade 316 ve atmosphere, shed (K3407 i i ons tted w i i ng such as v i K34 ser *Pin Hex screws if grade 316 speciﬁed. Made of grade 316 sta F (except K1807 and K2801) : sales@wade l ron frame) ron i

i Pol to prov Tapped Note K2801 cannot be used with GC, GD or GP series bodies. spec and K2407 only) M See sect bottle trap and he buckets, removable P For use w ﬂoor Opt H ][ K2307 on, showers and areas where h where and areas on, showers E-ma i 4 5 0 0 0 3 ...... ng an aggress zed cast i ng collars shown kg i i shed) ng i i 2 ng i cm Load class kg area area Free Free rat

. ng food preparat led or epoxy i

i . a i : +44(0)1787 475579

ng pools or hav ng pools or Max d dth mm th t i n guard, for use n guard, es have sherard nyl

i i i nches i i

Throat Throat i aperture ble sheet floor w Fax i nclud i mm i 2 n floors ons i i cm area area Free Free th verm th flex i i on 5B, membrane clamp i res For use w Condensate funnel (pol w w such as v K2107 K3407 cat below Depth i FFL mm

. a i d

nches n sect . Throat i i on appl i ons such as sw ons such as i a x 100H 60 4 35 2 i : +44(0)1787 475151 Overall ze above FFL mm ght i ﬁcat i cat i Tel i s mm he nyl Overall i es shown pheral slot i i a 101 d i ons ble sheet i In appl i gh spec . i ze at ze at ze i i th per ng (see Note 1) i th bod s mm s

Overall i i FFL mm

pheral slot, for Overall n h i i th ﬂex

i . . rement ng such as v i

i lable on request (K18, K23 and K34 ser (K18, K23 lable on request i th per i K2801 140 50 4 13 7 L15 1 K2407 150 53 4 58 6 L15 2 K2307 176 60 4 48 6 L15 2 K2107 150 53 4 58 6 L15 1 K1807 176 60 4 26 6 K3 2 Spec Code Spec Code K3407 176 d Flanged w Self secur W use w floor requ Satin finish K2801 K1807 Connect For use w For use Stainless steel – Grade 304 Grade steel – Stainless Vari-Level gratings Vari-Level ava ss 2 5G Vari-Level gratings floor use w (c Perforated grat Ant For usew L38 ser L33 ser L21 ser For usew Connect For use Satin finish Stainless steel–Grade304 Vari-Level gratings res not secured) appl request 30 2 2 847 33 K3 8 74 4 98 223 223 L3902 30 7 7 843 32 K3 8 38 4 98 173 173 L3901 30 2 2 847 33 K3 8 75 4 98 223 223 L3802 30 7 7 843 32 K3 8 34 4 98 173 173 L3801 30 2 2 84265L53 L15 5 216 4 98 223 223 L3702 30 7 7 84155L52 L15 5 105 4 98 173 173 L3701 30 2 2 84202 1 3 L15 23 290 4 98 223 223 L3602 30 7 7 84102 1 2 L15 23 150 4 98 173 173 L3601 30 2 2 84202 1 3 L15 23 290 4 98 223 223 L3502 30 7 7 84102 1 2 L15 23 150 4 98 173 173 L3501 30 0 0 54202 1 2 L15 23 290 4 75 200 200 L3402 30 5 5 54102 1 1 L15 23 150 4 75 150 150 L3401 30 0 0 54202 1 2 L15 23 290 4 75 200 200 L3302 30 5 5 54102 1 1 L15 23 150 4 75 150 150 L3301 30 0 0 547 32 K3 8 74 4 75 200 200 L3202 30 5 5 543 31 K3 8 38 4 75 150 150 L3201 30 0 0 547 32 K3 8 75 4 75 200 200 L3102 30 5 5 543 31 K3 8 34 4 75 150 150 L3101 20 0 0 54265L52 L15 5 216 4 75 200 200 L2902 20 5 5 54155L51 L15 5 105 4 75 150 150 L2901 20 4 4 748 1 1 L15 8 82 4 57 147 147 L2106 Code Spec 20 0 0 333 30 K3 5 30 433 101 101 L2105 i rcular apertures) for Apr i i n floors -sl i i cat ng suchasv . i i

l 2018 th ﬂex i p mesh(grat . Overall i i w ons suchassw n h mm i i i dth th t th bod i i i i es es es gh spec i i ble sheet ons i led orepoxy Overall length i

mm i es shown i nyl Tel i ng i ﬁcat : +44(0)1787 475151 Overall he mm i i mm ght i on appl L34 ser Pla not secured) i n sect i ng poolsorhav i Throat nches i n mesh(grat d i a i . cat

L39 ser L29 ser floor use w (square apertures) for Perforated grat secured w wedge profile grat Streaml i on 5B,membraneclamp i Free area cm ons i i es ng suchasv i 2 th flex Fax i i ne heel-proof reverse nclud

i aperture ng : +44(0)1787 475579 i i dth mm i th P Max i i ng anaggress es es i ble sheet i ng showersandareas where h . i i

n Hexscrews ng

i i nyl ng rat ls kg class Load L35 ser Pla ﬂoor w not secured), foruse i i ng i th ﬂex s i n mesh(grat i ng suchasv i i ve atmosphere, grade316 ng collarsshown ...... 5 6 5 6 6 7 8 8 8 8 8 8 8 8 5 6 5 6 5 6 4 7 i

ble sheet E-ma i es L53 ser non-secured grat H furthest from Wade logo To openpress centre ofs (c Square perforatedgrat L31 ser M H Opt buckets, removable bottletrapandhe See sect P i l 50 4 4 543 31 K3 6 31 4 55 147 147 L5308 20 5 q101d 150sq L2701 Spec Spec Code Code 50 3 3 543 31 K3 6 31 4 55 135 135 L5305 : sales@wade i

i nged coverw

rcular apertures) i ng Made ofgrade316sta (except L29,L33,L34,L35,L36,L37andL53ser F L35 orL36ser Pol *Pin Hex screws ifgrade316speciﬁed. *Pin Hexscrews i nyl i . . i tted w

ons i shed (L2701 Overall w i mm on 5Xforarangeofaccessor FFL mm i Overall i s dth n sect i L36 ser Ant ﬂoor w not secured), foruse i i i es ze at gh corros i es th P i i nt th ﬂex i . Overall -sl length

co i i

ng suchasv th ac mm i i n Torx* screws forsecur i on 5Candaccessor . i ng uk p mesh(grat i es) i i s recommended and ble sheet s i i s pol i FFL mm ns i ze above Overall . i on res Web Overall i rcular he i es i mm ng 0H5 52 35 4 57 a x100H i de i ght i de i : www shed asstandard – not L33,L34,

i . nless steel

i stance i nyl i Throat nches i d ng . i wade a FFL mm . Depth below L2701 verm Condensate funnelw

L32 ser (square apertures) Square perforatedgrat i s arequ i nt Free area L37 ser secured w wedge proﬁle grat Streaml ﬂoor For usew cm i . es shown i . i ght extens i co n guard (pol es 2 i i . Throat d i ty appl s ava uk ng suchasv i w

nclud i aperture

nches i dth mm i i Max i rement ne heel-proof reverse es i i lable on th ﬂex i th p i i i i . i n sect cat es ng ﬁlter a

i ons

i shed) i i . n hexscrews

Free ons area rat In cm ls kg class Load

i . i es) ble sheet i i i i i nyl on 5X th ng 2 ng . i ng

i s kg . . . 2 . 3 1 Vari-Level security gratings 5G ss 3 . s i l 2018 i on 5X i . Apr ons i s a ng ﬁlter n sect i i i es have i uk nclud . i stance i co . es i ght extens nt i i es shown i s recommended and s recommended i on res i wade .

. : www nless steel (K36 ser i gh corros i ng Web i ron frame) ron i uk . nage for use on 5C and accessor i co i . nt i . zed cast i n sect i nyl (4mm apertures) nyl (4mm apertures) i

on 5X for a range of accessor ble sheet floor i i ve atmosphere, grade 316 ve atmosphere, shed i i n Torx* screws screws n Torx* ty area dra ty area ons i i i *Pin Hex screws if grade 316 specified. Made of grade 316 sta sherard Many other Vari-Level gratings and access covers have gratings and Many other Vari-Level security screws by optional facility to add Pin Torx access cover specifying option ‘H’ (see other grating and pages in Sections 5G and 5V). K35 and K36 series can be manufactured with 3mm apertures but the drainage performance is unlikely to be adequate, so such versions are not offered as a standard product. : sales@wade l th flex th P i

i i Pol Notes 1. be used with GC, GD or GP series bodies. K2901 cannot 2. 3. K3604 Secur w such as v w Opt M P See sect bottle trap and he buckets, removable . E-ma 4 3 8 . . . ng an aggress i ng collars shown i ron frame) ron i ng i son cells, showers and areas where h where and areas son cells, showers i L15 1 th Load class kg i rat nage i n

i ng pr . i zed cast i : +44(0)1787 475579 ng pools or hav ng pools or i Max dth mm i

4 plug aperture Fax nclud w i 62 plug out mm ty area dra ty area i i n i ons i 2 n Torx* screws n Torx* i on 5B, membrane clamp i K3504 Secur (4mm apertures) w (4mm apertures) P cm cat area area Free Free i 2 plug 30 plug out es have sherard i

n sect . i a i on appl i d ons such as sw ons such as nches Throat i i : +44(0)1787 475151 ﬁcat (K36 ser cat i Tel . i ght i nage es shown mm i i he Overall ons

i In appl . gh spec . i a i th bod i d mm

n h Overall i ty area dra ty area

i . rement i

lable on request i K2901 114 50 4 Code Spec K3504 150 54 4 20 4 K3 1 K3604 176 60 4 20 4 K3 1 K2901 Secur (see Note 2) Connect For use w For use Stainless steel – Grade 304 304 Grade steel – Stainless Satin ﬁnish Vari-Level security gratings security Vari-Level requ ava Vari-Level access covers 5V l 2018 i 53 Apr STRUCTURAL SLAB uk . co . nt i DAMP PROOF MEMBRANE wade . : www 4" NPSM 152 dia. Web uk . co FLOOR SCREED . nt i ‘Superseal’ FINISHED FLOOR : sales@wade l i K5501 E-ma

; on i n i on th i ty i les, i i pework ficat also i i ; on, ble sheet i i nyl t i . an areas i ety of i ght i gh qual ng i i gh corros i : +44(0)1787 475579 th flex shed floors s for use w c or v n, carpet or gh spec i i i i i i ses separate on for the i Fax ty and to obta t a var i i i . l i n h . i n pedestr b on floor i i i shment projects to shment projects t i i . ck release and double ck release n unfin i i K5301 . ; rement ng ceram nformat i i ve range of h te ng food preparat i ons i i tecture i i s for use w i nyl i i als as follows: lable to su i ng qu i i

‘SuperSeal’ covers have – for use . ; es – for use i mes referred to as cleanouts to as cleanouts mes referred nclud i i nclud mens i i ors, terrazzo, res – for use ch complement wall and ch complement wall es by means of adaptors shown i i ed compos on or refurb i s a requ : +44(0)1787 475151 i i i od arch i Tel n plant rooms and car parks n plant rooms ty d ron ons i i i shes i l i i K51 ser

le ;

. th a fine thread to enable accurate to enable th a fine thread i ng such as v cat ons are ava ons are . i i i i nless steel fferent mater fferent i stance i i son cells, and areas where h where son cells, and areas llustrated oppos ckel bronze etary gull i i i i on of the catalogue compr i on at floor level floor fin vers res pr appl trowel appl trowel floor marble, pav N match per such as for restorat Sta wood Duct shes ng eyes, wh i

i on 5X i i

onal beneﬁts of be

i i t i

-Level covers may also be connected to p -Level covers may also be connected -Level threaded access covers are he covers are access -Level threaded i i s sect ght adjustab Direct connection access covers, shown in Section 6V, Direct connection access covers, shown in Section 6V, are for use where a gully body is not required; they look access covers when installed, but are identical to Vari-Level machined to enable direct connection to pipework. Double-sealed access covers for man entry and general purpose access covers are shown in Section 11. i i n Sect nstallat Th i and propr Var sealed as add Most covers are sealed Most covers are 5V nb Notes 1. 2. pages for d or rodd access covers, somet Wade offers a comprehens offers Wade

For use with bodies shown in section 5B, membrane clamping collars collars clamping membrane 5B, section in shown bodies use with For 5X in section and accessories in section 5C shown Vari-Level access covers access Vari-Level 5V ss he Please refer to the product to the product Please refer compat selected body to ensure i adjustable w floor fin 5V c Var c 5V i Vari-Level access covers to matchper ‘SuperSeal’ (doublesealed) K5801 For usew Connect For use Ductile iron –BS EN1563+1564 Vari-Level accesscovers Sherardized, matt finish(withcastiron frame) Code Spec 50 7 04M2 2 M125 4 60 – 176 K5801 50 5 5 74L53 L15 4 57 150 150 L5701 Apr . i

l 2018 d i n i Overall a i unﬁn th bod . mm /w i i i od arch ons dth i shed i es shown Tel Overall length mm i : +44(0)1787 475151 tecture ﬂoorssuchas i n sect . Overall he mm i ght ‘SuperSeal’ (doublesealed) L5701 i on 5B,membraneclamp i n serv i Throat Fax nches d i

a i : +44(0)1787 475579 ce andpark .

rat ls kg class Load i ng

i ng areas andplantrooms i ng collarsshown . . 7 6 E-ma H Opt i l : sales@wade F i i tted w ons i n sect i th P i nt ; . alsoforrestorat co i i n Torx screws forsecur on 5Candaccessor . uk Web : www . i wade on orrefurb i nt i es shown . co i ty appl . uk i shment projects i cat i n sect i ons i on 5X . . Vari-Level access covers nb 5V . nyl i ed es, i i l 2018 i on 5X i pes – i . Apr ons i ons i ng ﬁlter n sect i i led or epoxy cat i i es have i ng such as v i es to K51 ser th trowel appl th trowel th t i i i 4mm ﬂange depth

uk . nclud . i ty appl co ng i . i es on for waste p i i ght extens nt i i K5103 and L5103 es shown K5102 may also be i ; ; ‘SuperSeal’ (double sealed) L5601 wade . on ﬂoor i

ble sheet floor ", or 2" (appl t i i 2 ⁄ 1 (K51 and K56 ser (K51 and . : www rect connect rect n floors ", 1 i i 4 ⁄ th flex i 1 Web es and K5301 i compos K5301 Gasketed – for use w K5601 ‘SuperSeal’ (double sealed) – for use w L5103 res Gasketed – for use w uk de a d . an traffic . i i on 5C and accessor co n Torx screws for secur screws n Torx i . i . nt i ze BSP – 1 i th P es, L51 ser i i n sect i

on 5X for a range of accessor fy s i i ons tted w i i K52 ser may also be tapped 3" or 4" BSP tapped 3" BSP) Tapped to prov Tapped spec (not K5401) F : sales@wade led or epoxy led or epoxy l i i i

n ﬂoors See sect he bottle trap and buckets, removable ‘SuperSeal’ (double sealed) L5501 Opt H ][ i th t th t i i E-ma gh volume of pedestr gh volume i 5 5 2 3 0 1 3 8 3 4 5 7 5 6 6 6 7 2 ...... th h ng collars shown i i es ng i i ng

Load class kg rat led or epoxy res i on has sealed th grat i i n ﬂoors n ﬂoors i i th t i

ted to areas w ted to areas . : +44(0)1787 475579 i ‘SuperSeal’ (double sealed) – for use w res res Gasketed – for use w L5101 K52 ser Gasketed – for use w K5501 a i d Fax nches Throat i L54 vers . de i nged cover w cularly su i i on 5B, membrane clamp ns i ght cover, (L53 unsealed) cover, i L5301/L5401 H i mm al i he Overall n plunge i ble sheet Recessed n sect . i i . ng mater : +44(0)1787 475151 i mm th ﬂex i length shed and part Overall i Tel nyl i ron frame) ron es shown i i dth i ng seal for use n square frame n square i i ons i /w es mm . i a Overall i th bod i

zed cast i th ‘O’ r i

. ng such as v

i nged cover i K5103K5201K5202 250K5203 135K5301 135K5401 150 –K5501 152 –K5601 155 – 48K5701 152 152 – 58L5101 176 – 55L5103 – 4L5201* – 135 – 48L5301* 4 160 – 53L5401 3 150 L15 54L5501 135 150 65 53 L15L5601 160 4 1 150 60 150 L15 4 150 4 150 42 4 150 1 4 L15 60 150 4 48 L15 150 4 2 55 L15 150 4 2 L15 L15 55 4 2 L15 57 4 2 1 48 4 L15 2 L15 4 1 L15 4 2 L15 4 1 L15 2 L15 2 L15 2 1 K5102 176 – 60 4 L15 2 K5101 142 – 54 3 L15 1 Code Spec Unsealed versions. (unsealed) H sherard Satin finish * L5201 K5701 K5401 Gasketed – for use w floor For use w K51 ser Durable, superbly fin Durable, superbly Connect Nickel bronze – BS EN 1982 BS EN – bronze Nickel Vari-Level access covers access Vari-Level (19mm depth) for floor ‘SuperSeal’ (double sealed) Plug w and foot baths ss 5V Vari-Level access covers floor – forusew ‘SuperSeal’ (doublesealed) floor For usew (unsealed) Satin finish ava * K5607 K5107 For usew Connect For use Stainless steel–Grade304 Vari-Level accesscovers requ Unsealed versions. Code Spec 50 5 5 54L52 1 L15 1 L15 1 K3 1 4 K3 1 4 L15 1 2 4 L15 1 4 L15 75 L15 4 57 L15 4 60 4 150 55 4 147 4 53 150 53 150 135 53 –60 147 60 – 150 L5807 – 135 L5507 – 176 L5308* 150 – L5305* 150 K5607 150 K5507 K5307 176 K5207 K5107* Apr i lable onrequest (K51andK56ser i i i ng suchasv ng suchasv rement . i

l 2018 i n h d i i

th flex th bod i Overall i a th flex i . . mm gh spec /w Inappl i ons i dth i i ble sheet es shown i i i ble sheet nyl nyl Tel i i cat ficat Overall : +44(0)1787 475151 length mm i ons suchassw i on appl i n sect Overall he mm i cat i Gasketed –forusew or epoxyres L53 ser K5207 non-secured grat Wade logo centre ofs (unsealed) H ght i on 5B,membraneclamp i nged coverw i ons i es havesherard i mm Fax i i Throat nclud nches d : +44(0)1787 475579

. i i i ng poolsorhav a To openpress i de furthestfrom

es .

i n ﬂoors i ng pr i th ac

i ng rat ls kg class Load i son cells,showersandareas where h i ng i i i zed cast ns th t i rcular i de i led i ng collarsshown i . ng anaggress ......

0 9 3 1 4 4 8 2 9 E-ma i ron frame) ﬂoor trowel appl Gasketed –forusew K5307 ][ H Opt

M buckets, removable bottletrapandhe See sect P i L5507 – forusew ‘SuperSeal’ (doublesealed) res

l : sales@wade Pol

(not L53ser F *Pin Hex screws ifgrade316speciﬁed. *Pin Hexscrews spec Tapped toprov Made ofgrade316sta have sherard K5207 andK5307only) i n ﬂoors i ng i i tted w ons i . i shed . ve atmosphere, grade316

6mmﬂangedepth i i fy s on 5Xforarangeofaccessor i

n sect i ed compos i i th t th P . i i nt ze BSP–1 . co i i led orepoxy es) i i i n Torx* screws forsecur zed cast on 5Candaccessor . uk i . de ad

i th Web i t i 1 i gh corros on ⁄ 4 i ", 1 rect connect : www i i ron frame) nless steel(K51andK56ser . 1 ⁄ 2 ", or2"(appl . wade – forusew ‘SuperSeal’ (doublesealed) res (22mm recess depth) Recessed forﬂoor ‘SuperSeal’ (doublesealed) L5807 K5507 i on res i s recommended and i i nt . n ﬂoors i es shown i . ght extens i i co on forwastep es i i . stance ty appl uk i nclud i

es toK5107, i th t i i i i i n sect cat ng ﬁlter led orepoxy s a i ons i i ons ng mater . i pes – i on 5X i es i s . . i

al Vari-Level accessories 1 5X 2 0 9 2 0 . . . . . l 2018 i shed) 0 i zed) 2 zed) 1 Apr i i on from on from i al kg . i 3 l/s mum of a . i Mater n uk i . ron (sherard ron ron (sherard ron i i

nless steel (pol co . . i . ckel bronze 2 ckel bronze 1 . i i nt red to prevent the to prevent red i i nlet or outlet i 76 2 -Level body, unless body -Level body, i on where protect on where wade . i . cm area area Free Free ng/cover, a m ng/cover, th 3" throat th 4" throat i ll be requ i i 2 kg) c i entat : www . i i ght i mum ﬂow rate of 0 i mm mum 3" outlet he i a/sq) Overall i th Web on w i n i i cal or i Finished floor ngs) (0 ng on the Var ly plug 100mm Max i i i . rect rect i uk . th m -Level grat i i mm ng/cover w ng/cover w red nd i i co i i . length Overall n vert i on nt i i 150mm d 200 . es w ple (for use w i i on 38 ; n i i dth th grat th grat s requ i i i i mm m nto a Var w pes . i i Overall nstallat i

. nless steel (U704) and neoprene

ng 200 i 38 ngs i nstallat i i ng i : sales@wade l i U602 85 225 96 42 Cast U601 82 222 96 42 N U511 101 101 100 92 Sta U502 101 101 101 23 Cast U501 101 101 101 23 N Code Spec s C or D ser (Not K28 or K29 grat Note A filter bucket or U1404 cannot be fitted if a backwater valve is used. U102 or UP104 extens grat backwater valve foul i If fitt UX9901 to temporar Tapered dur Backwater valve – brass (U703) or Backwater valve – brass (U703) sta For U703 For use w U704 For use w Outlet plug – plast U601/U602 take mult To waste p backflow E-ma 6 6 . . nage i th any i rect rect i ons where ons where i on 5G, or i al kg i nd i cat i . : +44(0)1787 475579 c nless steel 1 nless steel 1 i i i ng Mater n sect i ngle i i for use w Fax pe ; i A filter bucket cannot . fy grat i Note be fitted if a backwater valve or removable bottle trap is used. U502/U511 s take To waste p on 8, for appl i ng, shown i 2 ng ng pans etc i i

l . i cm rect waste or condensate dra waste rect th . i i n sect i Free area area Free nd ) w i th 4" Please spec th ons i † . s, valuables etc i i nage : +44(0)1787 475151 i t

i i . de a grat -Level grat i i Tel ns rect rect . i i . ngs w red for red i i ng shown i ght mm i ngs (not nd Overall i i he 1 kg) ﬁed to su 1 kg) scharge from bo from scharge . i . i To ﬁt To th 4" throat/outlet . on for use w i th grat th any Var s requ i i i i ngle ntercept debr ntercept

i i pe not K18, K28, K29 on to ﬂoor dra i i † es (0 t outlet versions do not require an extension) on i i i

" . s ﬂow rate of 1 l/s -Level grat

i es C5 and D4 adaptors ng mod i . i i -Level grat i U1404 cannot be used with K18, K28 or K29. U1404 is incompatible with ‘SuperSeal’ access covers. is required extension to accommodate the A Vari-Level U1404 with the following bodies: *C2, *C3, D10, D11, G1-G10 series. (*4 Frequent cleaning will be necessary in applications where very high amounts of hair and other waste materials are present. When used with direct connection gratings/access covers shown in section 6, connecting pipe must be vertical for min. distance of 100mm below the grating/access cover. lter bucket – nylon 6 i Code Spec U1202 250 12 Sta U1203* 250 12 Sta U1203 is version without a spout. n add prov i or K3211) (0 Var Mult U1404 50mm seal Removable bottle trap – plast or body, w or body, Max UP702 Deep vers Used to UP701 For use w F * ( throat Portable funnel accept d To U501 s take To Bolt-on funnels Bolt-on funnels For use w waste p For use with Vari-Level gratings and access covers access and gratings Vari-Level use with For Vari-Level accessories Vari-Level grat bod T702, T901 and extens U1 ser Notes 1. 2. 3. 4. 5. 2 5X Vari-Level accessories and adaptors U1101 Reduc to propr Var Gully adaptors–cast Var Adaptors top For usewithVari-Level gratingsandaccesscovers Vari-Level accessoriesandadaptors adaptor sect sect by revers i be connectedtop w to beused 15mm min./27mm maximum by Height ofgrating/coverwillbeincreased Note 3" throat – access coversw ron adaptor, asshown 72Cast T712 91Ca uesee10m12153 145 122 ClaySupersleve100mm T911 72Cast Cast T712 T801 71Cast T701 72Plast T712 74Plast T714 71Plast T701 Spec 3" Throat i th 4" Apr i i -Level grat -Level grat i i T1301 T1302 on 5V, whenusedw on 5Gandaccesscoversshown . i Code l 2018 i . i nlet Increased rangeofhe etary clayorPVCgullybod i ng theadaptor i To enable3"throat grat ng bush–cast

i Adaptors forusew . n Var

5m qae180mmd 150mm square

i i ngs, shown ngs, shown i i i th 3"throat o I 92 M 5m16171 127 106 ron DIN19522SMU75mm -Level bod i Tel i pework bymeansofacast o I 92 0m 3 1 2 115 130 ron DIN19522100mm For usew For usew i o S4610m10152 115 130 ron BS416100mm i i o S467m 0 2 1 127 106 ron BS41675mm : +44(0)1787 475151 pework Var P i c 110mmO i i c 75mmO c 82mmO system i Gully adaptor i pework grat grat n thefollow . i i Clay body -Level grat thout abody, may i i i i n sect n ng/cover ng/cover i . es/adaptors i i th 3"throat th 4"throat i Weephole i ght adjustab th Var . . . D D D i . . i ron i . i ron on 5G,maybeconnected ngs/covers i i i ng tables: es bymeansofagully ng i -Level grat i n Fax Max O mm 3 1 2 115 130 3 3 2 130 130 0 2 1 127 106 i : +44(0)1787 475579 i a l . i D . ty . . T1401 T1402

i s obta i ngs and Overall length mkg mm i nable

...... 2 5 5 5 9 5 4 2 E-ma grat bodies. used withG/GC/GD/GP/QGseriestrapped when but accesstotrap/plugwillberestricted Extensions maybestackedtoobtainextraheight, Note of abodyandfin for details. types unlesstheextensioniscut inlength.Seeourwebsite for minimumheightgainedcannot beobtainedwithsomebody adjustability’ sectionfortheselected body. shown Thefigures to themaximumandminimum dimensions giveninthe‘height Additional heightdimensionsgiven inthetableshouldbeadded Note U208 U201 U102/U103/U104/UP104 U101 Used to Extens be stacked. ‘E’ tothebodySpec.Code;2.Thisbolt-onextensioncannot holes,addsuffix fittedoptionwithpre-drilled U208 asafactory bodies, 3no.M6tappedholesmustbedrilledonsite.To order 4" throat – *Plastic (ABS)versionforusewithGPseriesbodies *Plastic (ABS)version. access coversw of only25mm and bod 4" throat andbod and bod i P0*4 "12 615100 120 145 36 152 4" UP104* 284 5 52 8 0 188 1 2 130 25 1 25 25 130 130 40 115 110 85 152 145 40 4"– 95 100 4"3" 4" U208 4" U201 U104 U103 124 "6 3 5101 130 1 106 37 55 60 42 127 120 4" 3" U102 U101 Code Spec l 73Plast T703 74Plast T704 P0*Plast TP702* 72Cast Cast Cast T702 T803 T792 72Cast Cast Cast T702 T703 T792 91Ca uesee10m12102 130 122 3 220 ClaySupersleve 100mm 130 2"BSP(T742hasmalethread) T742 T901 Spec 4" Throat : sales@wade i ngs/funnels/covers w . .

Code Female Thread s i i For usew For usew For usew i es ser es w ncrease thehe i ons –cast Adaptors forusew i nt i . th 3"

. i Notes: co es G2-G10toprov i

ze NPSM i i th 4"throat . shed floorlevel i uk Male es w i i i i th Var th Var th Var o I 92 M 5m10151 115 130 ron DIN19522SMU75mm i nlet i o I 92 0m 3 0 1 100 130 ron DIN19522100mm i o I 92 0m10103 180 130 ron DIN1952250mm i Web o S4610m10101 100 130 ron BS416100mm i i 1.When retro-fitting toG2-G10series 1.When retro-fitting o S467m 3 1 1 3 115 180 130 130 ron BS41675mm ron BS41650mm i th 3" . P i i c 110mmO i i ght betweenthetop c 82mmO c 75mmO system i i i i -Level grat -Level grat -Level grat pework he i : www th 4"throat andbod Overall i i ron ght mm . i nlet i th Var . wade . . . .

D . D i D de he . . . i i i i He ngs/covers w ngs/funnels/covers w ngs/covers w nt M i For usew -Level grat . i i co n ght ga i . ght

. uk Max i i ncrease ned Max O mm 2 5 0 152 120 3 1 1 115 130 3 1 1 115 130 i i . es w th Var . D i ngs and . .

i i th 4"throat th 3"throat Max O Overall i length th 4" mkg mm mkg mm i 130 d -Level . D i i . nlet th i

a ...... 3 4 4 3 7 3 4 5 7 5 6 9 1 4 5 5 6 6 . Vari-Level accessories and adaptors 3 5X

. l 2018 i Apr ASPHALT must ; EXTENSION TIMBER DECK VARI-LEVEL BODY STRUCTURAL SLAB MEMBRANE nlet i uk . de co i MEMBRANE CLAMPING COLLAR . nt i GRATING/COVER wade ron 2" BSP male hollow plug ron . i . : www Web GRATING/COVER be sealed U1802 Malleable Used to block a s Male hollow plug FINISHED FLOOR uk . U1501 TIMBER DECK ADAPTOR co . nt i U1601 ASPHALT FLANGE . TILES TIMBER SUPPORT on OPTIONAL SIDE INLET i OPTIONAL SIDE INLET : sales@wade l i E-ma 2 9 0 . . . ron 90° swept bend 2" BSP ron i : +44(0)1787 475579 . . U1301 90° Swept bend Malleable male to 2" BSP female connect a a . i i Fax es i mm A B C kg . 300mm d 245mm d on Water seal Water i . . ze i 'B' on es trapped bod i i es i le : +44(0)1787 475151 i Code Code . . Tel thread s thread th t Inlet & outlet i – add sufﬁx – add sufﬁx nstallat i 'C' on adaptors pe i i

es for P ron 90° swept bend 2" BSP ron ze mm i . th G2-G10 ser i i i ron membrane membrane ron th G2-G10 ser i i s

fy/order fy/order fy/order fy/order i i ron sh i

i .

mber deck w . i

es i nless steel asphalt flange nless steel support plate nless steel support plate es bod i i i 'A' U904 100 4" BSP 132 379 90 25015 90 U903379 BSP U904132 75 100 4" BSP 3" 125 318 70 210 11 U902 50 BSP 2" 102 234 50 162 4 Spec Code n a t Deep seal ‘P’ trap – cast To spec To to the body Spec ‘A’ floor fin To spec To ‘D’ to the body Spec U902, U903, U904 Malleable male to 2" BSP female connect U16 Sta for use w Sta Installat For use w U15 and cast bod clamp to adapt G2-G10 clamp to adapt G2-G10 ser For use with Vari-Level bodies, gratings and access covers access and gratings bodies, Vari-Level use with For Vari-Level accessories and adaptors and accessories Vari-Level i Direct connection Direct connection For applications where a gully body is not required, Wade offersDIRECT a comprehensive CONNECTION range of high quality gratingsACCESS COVER and access covers which complement floor finishes.

Direct connection versions look identical to RING SEAL Vari-Level versions when installed, but are machined SOCKET to enable direct connection to pipework by means of proprietary couplings or ring seal sockets. Mostly, one version of grating or access cover is suitable for all pipework of the same size, but tolerances of castings and pipework are such that K2193 in some cases different versions of the same style Nickel bronze grating and size of grating or access cover are required for with U1404 removable different pipework – this is made clear by the Spec. push-in bottle trap Codes in the tables on the following pages. This section of the technical manual comprises Typical installation separate sub-sections for gratings (6G) and access DIRECT covers (6V) which are divided into separate pages for CONNECTION different materials as follows: GRATING 6G ci Cast iron – for use in unfinished floors 6V ci such as in plant rooms and car parks and also for restoration or refurbishment projects where there is a requirement to match period architecture. 6G nb Nickel bronze – for use in pedestrian areas; PIPEWORK 6V nb versions are available to suit a variety of floor COUPLING finishes including ceramic or vinyl tiles, marble, paviors, terrazzo, resin, carpet or wood; flexible sheet flooring such as vinyl and trowel applied composition flooring. 6G ss Stainless steel – for use in high specification 6V ss applications including food preparation, prison cells, showers and areas where high corrosion resistance is a requirement.

K5293 Nickel bronze access cover

Typical installation

DIRECT CONNECTION ACCESS COVER

RING SEAL SOCKET

DIRECT CONNECTION GRATING

PIPEWORK COUPLING i

Direct connection gratings c 6G 7 8 3 7 . . . . . l 2018 i n i . ons Apr i cat Load ng class kg ng ﬁlter i i i rat cular trafﬁc areas uk i nclud

. i shment projects shment projects ty appl i i co .

es . i nt i . ght veh i aperture . dth mm . er nless steel) (for use i i L2691 L i wade on 10 i . w Max on or refurb i : www shed ﬂoors – K2591 only) i

n Sect . 2 i Web on ﬁn i Free t pework suppl i i uk area cm area . co n Torx screw(s) for secur screw(s) n Torx . i nt i

also for restorat th P ; ][ i nches i on 5X for a range of accessor

i ve ﬂoral pattern . i Throat a i llustrated on page 6 ons i d i tted w i lable from the p lable from asphalt/compos F Asphalt membrane clamp (sta i : sales@wade l i

ng adaptor T1103 shown ng adaptor T1103 shown H See sect bottle trap buckets and removable Sufﬁx A L2591 C Decorat Opt i red, as red, i E-ma ght mm i Overall pe us i he s requ i . ng areas and plant rooms ng areas i tecture i ngs are generally ava ngs are Overall i . length mm : +44(0)1787 475579 mum ng seal socket cular trafﬁc areas i

i i od arch Fax n i ce and park i dth i i mm a/w i Overall ng or r i d

ght veh i K2591 L . a i d . pework systems, coupl i on a coupl i : +44(0)1787 475151 ng i ﬂoors such as serv ﬂoors such rement to match per to rement i Tel pework got length of 25mm m i i shed i + P* 100 155 – 54 4 58 7 K3 1 + P* 100 176 – 60 4 85 11 L15 1 + P* 100 150 150 57 4 60 14 K3 2 + P* 100 150 150 57 4 55 7 L15 1 . . . .

I I I I

. . . . ons s a requ i ][ on to other p i P System Nom i rcular grat rcular i unﬁn

n i

. ngs can also be connected to 100mm Supersleve clay p ngs can also be connected ngs have a sp

i i C.I. + P means cast iron BS 416/DIN 19522 and plastic. C.I. + P means cast iron BS 416/DIN 19522 K2193 CI C Spec Code K2591 C L2591 CI C L2691 C Sherardized, matt finish Sherardized, where there there where Grat For connect Grat * K2193 C To complete the connect complete To For use Connect Cast iron BS EN 1561 BS EN iron Cast Direct connection gratings connection Direct Standard c Standard nb 1 6G Direct connection gratings shown onpage6Gnbsf Grat * Vers For connect Grat compos For usew K2491 W K1941 Grat To completetheconnect Connect Durable, superblyfin Nickel bronze BSEN1982 Direct connectiongratings Satin finish 4mm flangedepth 39 C K3191 29 C K2491 29 C K2291 29 C K2193 Code Spec 29 C K2191 24 Plast C C K2142 K2041 K1941 C.I. +PmeanscastironBS416/DIN19522andplastic. i th centralsecur Apr i i i i ons forusew ngs haveasp ngs w ngs w . i

l 2018 2" BSP 98 dia. i t

i i on ﬂoor th trowel appl i i th 3"throat canalsobeconnectedto75mmDIN19522Ens th 4"throat canalsobeconnectedto100mmSupersleveclayp i System Nom P on tootherp i . . ons . . . . . I I I I I I I ...... +P 0 3 78( 135 100 +P* +P 0 5 845 1 1 L15 6 58 4 48 150 100 +P* +P 0 7 247 1 2 L15 7 73 4 72 176 100 +P* +P 0 5 445 1 1 L15 6 58 4 54 155 100 +P* +P 0 3 844 31 K3 6 40 4 48 135 100 +P* +P 09 02 S eae1 4K 0 0 K3 K3 14 14 11 11 2"BSPfemale 2"BSPfemale 50 50 98 98 50 50 +P* +P* i 7 3 534 31 K3 6 40 3 55 135 75 c i ng i i Tel ng screw th ﬂex i i got lengthof25mmm pework . i : +44(0)1787 475151

shed andpart 50 i . ed i i on acoupl ble sheetﬂoor i pework systems,coupl . d i a . K3191 K2041 protrudes 30mm channels Reduces r Self secur i cularly su d i ng orr Overall i a/w mm i ng suchasv Fax 98 dia. i 2" BSP dth i n . i

Removabledome ng sealsocket : +44(0)1787 475579 mum i

i ng sk ofblockages i ted toareas w . i ngs are generallyava he Overall i i nc i ght mm nyl are . dm)44 6L51 L15 16 45 4 dome) 50 i s requ i th h i n E-ma i gh volumeofpedestr i red, as K21 ser ][ H Sufﬁx Opt For usew res buckets andremovable bottletrap See sect i d

l : sales@wade

i a Throat i . i n ﬂoor F (not K2041orK2291) spec tapped 3") and K2191maybetapped1"only Tapped toprov

i lable from thep i gn cast nches i tted w i i ons llustrated onpage6 i pe us i i fy s on 5Xforarangeofaccessor i th t i i th P es i i i ron p nt ze BSP, 1"or2"(appl i i led orepoxy . ng adaptorT1103shown . co

n Torx screw(s) forsecur area cm . uk i pe us i Free i an trafﬁc de ad i pework suppl Web 2 i ng adaptorT1603shown .

i rect connect : www . . Max w . wade i . dth mm aperture (grat Ind K2291 i er . i es toK2193,K2591 . i nt i rect wasteconnector ; i . K2193mayalsobe i ng notsecured) i co on forwastep es i n Sect . i uk ty appl i nclud rat i i on 10 ng class Load i i ng ﬁlter cat i n Sect i ons . i pes – ; K2142 i on 10 kg ......

. . 0 9 5 5 0 0 9 9 . Direct connection gratings 6G nb 2 1 2 7 3 2 4 4 ...... kg l 2018 pheral i i rect rect i ons Apr 2 i nd i n guard i th per cat i ng ﬁlter i i Free ple w i ; area cm area

uk nclud . i pes ty appl i i co . es . i nt i . . er i To take mult To waste p cover and verm L2893 wade on 10 i . nches i

. Throat a . : www i n Sect d . i

. Web pework suppl i uk an trafﬁc . i rect waste rect rect waste rect i i co n Torx screw(s) for secur screw(s) n Torx . i nd nd nt i i i pheral cover pheral cover and i i th P i FFL mm n guard

ngle ngle i

on 5X for a range of accessor i i

i Depth below th per th per i i llustrated on page 6 llustrated on ons i n guard n guard i tted w w w i i ; ; lable from the p lable from (not K2691 or K2791) F i : sales@wade l i pe pe

i i ng adaptor T1103 shown ng adaptor T1103 shown and verm To take s To p verm K3391 s take To p L2891 See sect bottle trap buckets and removable Opt Sufﬁx H i red, as red, i E-ma ze gh volume of pedestr gh volume i i pe us i x 96H 72 4 48 3 x 101H 48 4 23 2 x 101H 60 4 12 3 x 101H 48 4 12 3 th h . . . . i a a a a ng s requ i i i i i i Overall s

above FFL mm ; 224L x 85W x 99H 72 4 55 4 108 d 101 d 101 d 224L x 85W x 99H 60 4 21 4 101 d 225L x 85W x 96 H 57 4 21 4 nyl rect waste rect i i ble sheet i ngs are generally ava ngs are i . nd i pheral grat i . . . . . ted to areas w ted to areas ze : +44(0)1787 475579 . . i i a a a a a i i i i i th ﬂex

mum i ng seal socket ng seal socket

ngle i

i i pheral cover and Fax n i th per i i n guard i w ng such as v i ; at FFL mm Overall s ng or r th per i cularly su pe i i i w (Funnel not secured) verm ﬂoor To take s take To For use w p K2791 K3492 . a i d . pework systems, coupl i on a coupl i : +44(0)1787 475151 pheral

i shed and part ; i Tel rect rect i pework got length of 25mm m i i nyl i ble sheet nd i i th per + P* 100 d 176 + P* 100 176 d + P* 100 150 d + P* 100 d 176 + P* 100 176 d + P* 100 150 sq + P* 100 150 sq i ...... I I I I I I I . . . . ons . . . i ple w on to other p P System Nom i i ; th ﬂex

pheral cover and pes i i

. n guard i ng such as v ngs can also be connected to 100mm Supersleve clay p ngs can also be connected ngs have a sp

i ng (Funnel not secured) i i i th per i C.I. + P means cast iron BS 416/DIN 19522 and plastic. C.I. + P means cast iron BS 416/DIN 19522 K2691 C Code Spec K2791 C K3391 C K3491 C K3492 C L2891 C L2893 C w verm For use w floor To take mult take To waste p grat Satin finish Grat K3491 For connect K2691 Durable, superbly fin Durable, superbly Connect connect complete the To Nickel bronze BS EN 1982 EN BS bronze Nickel Direct connection gratings connection Direct * Grat For information on flow rates please contact our Services Department. Technical nb 3 6G Direct connection gratings For connect shown onpage6Gnbsf Grat * L2391 L1941 Grat Grat To completetheconnect Connect Durable, superblyfin Nickel bronze BS EN1982 Direct connectiongratings Vers Satin finish Square framedgrat Secur female outlet 59 C L5491 59 C L5391 39 C L3091 29 C L2591 29 C L2391 29 C L2292 29 Cast L2291 24 Plast L2241 29 C L2194 29 C L2193 29 C L2192 29 Cast L2191 24 Plast C L2141 C L2041 L1941 Code Spec C.I. +PmeanscastironBS416/DIN19522andplastic. Apr i i i i ons forusew ngs haveasp ngs w ngs w . i i

l 2018 ng screw –w

i i System Nom P th 3"throat canalsobeconnectedto75mmDIN19522Ens th 4"throat canalsobeconnectedto100mmSupersleveclayp i ...... on tootherp I I I I I I I I I I I i ...... ons +P 0 5 5 544 1 2 L15 4 44 4 55 150 150 100 +P* +P 0 5 5 544 1 2 L15 4 44 4 55 150 150 100 +P* +P 0 6 6 049 1 2 L15 7 92 4 60 161 161 100 +P* +P 0 5 5 746 3L52 L15 13 60 4 57 150 150 100 +P* +P 0 5 5 844 1 1 L15 6 40 4 48 150 150 100 +P* +P 0 2 3 04156L55 L15 6 155 4 70 430 125 100 +P* +P 0 0 0 04168L53 L15 8 156 4 70 201 201 100 +P* +P 0 5 5 748 1 1 L15 8 82 4 57 150 150 100 +P* +P 0 3 3 346 1 1 L15 6 60 4 53 135 135 100 +P* +P 010105 "BPfml 11 30 0 K3 K3 14 14 11 11 2"BSPfemale 2"BSPfemale 50 50 100 100 100 100 50 50 +P* +P* i i i i 8 0 0 736 1 1 L15 8 66 3 57 204 102 82 c 8 0 0 533 30 K3 6 30 3 45 101 101 82 c o S46 7 0 0 736 1 1 L15 8 66 3 57 204 102 75 ron BS416 o S46 7 0 0 533 30 K3 6 30 3 45 101 101 75 ron BS416 i Tel th ﬂex i got lengthof25mmm i i ng th 2"BSP i pework i : +44(0)1787 475151 shed andpart . i i

on acoupl ble sheetﬂoor i pework systems,coupl . d i a L2591 L2041 Decorat Self secur female outlet . i cularly su i ng orr w Overall i dth mm i ng suchasv Fax i i n ve ﬂoralpattern

i i

ng sealsocket : +44(0)1787 475579 i mum ng –w i ted toareas w . i length mm ngs are generallyava i Overall th 2"BSP i nyl are i s requ i th h he E-ma Overall i i ght mm gh volumeofpedestr i red, as For usew L3091 L21 ser ][ H Sufﬁx Opt res H buckets andremovable bottletrap See sect i

l : sales@wade i

nged grat i i n ﬂoor F (Not L2041) (L2391 only–1"BSPs Tapped toprov i lable from thep gn cast i tted w i i d ons llustrated onpage6 i i a Throat pe us i

. on 5Xforarangeofaccessor

i i th t nches i i i es th P ng i i ron p nt i i led orepoxy ng adaptorT1103shown . co .

i n Torx screw(s) forsecur . uk i pe us i i an trafﬁc de ad area cm i pework suppl Free Web i ng adaptorT1603shown i rect connect : www . 2 i ze ava . Max . wade w i L5391/L5491 Rectangular L22 ser Grat h has sealedcover i i lable) er . dth mm . aperture i nged cover . i nt i . ng concealedbysol i i co on forwastep es .

i n Sect . i uk ty appl i nclud i es rat . i L5491vers on 10 i i i ng ﬁlter gcaskg ng class Load cat i n Sect i ons . i

pes – i on 10 i i d on ...... 6 6 3 1 3 6 8 8 9 9 7 9 9 9 9 . Direct connection gratings 6G nb 4 . 0 0 9 5 3 0 0 0 9 5 ...... on 10 i

. l 2018 i . ons Apr i n Sect i cat Load ng class kg ng ﬁlter i i i on 10 i rat uk

nclud .

i ty appl i n Sect co i . lable to match the lable to match es i i nt i . aperture . dth mm . er i i wade .

Max ng are ava ng are i : www 2 . ng adaptor T1603 shown ng adaptor T1603 shown i Web Platt 2300 L2496 L2449/L2499 Strata Buchtal 4420/54420 Free pework suppl i uk area cm area . pe us i co n Torx screw(s) for secur screw(s) n Torx . i nt ng adaptor T1103 shown ng adaptor T1103 shown i i x styles of grat x styles of ron p ron i i th P i S nches . i

on 5X for a range of accessor . i pe us Throat a i i llustrated on page 6 d ons i i tted w i gn cast lable from the p lable from i F i : sales@wade l i

le channel Opt Sufﬁx H See sect bottle trap buckets and removable i red, as red,

i E-ma

ght mm i Overall scroft 2302/ scroft he i s requ i n a run of t i

nyl are nyl are i c i Overall nage ngton/Wool ngs are generally ava ngs are length mm i i i l 4420 . i lk i Keram L2498 L2444/L2494 Ga P : +44(0)1787 475579 mum ng seal socket

i de dra i i Fax n i ng such as v dth mm i i Overall . w ng or r i . a i ngs to prov d i . pework systems, coupl i ble sheet ﬂoor on a coupl

i i n general use . i : +44(0)1787 475151 shed grat les i pework i Tel i

got length of 25mm m

i th ﬂex i c t i ron BS 416ron 75 150 150 70 3 90 6 L15 2 ron BS 416ron 75 150 150 73 3 92 6 L15 2 ron BS 416ron 75 150 150 70 3 90 6 L15 1 ron BS 416ron 75 115 115 58 3 32 6 L15 1 c 82 150 150 70 3 90 6 L15 2 c 82 150 150 73 3 92 6 L15 2 c 82 150 150 70 3 90 6 L15 1 c 82 115 115 58 3 32 6 L15 1 i i i i i i i i + P* 100 150 150 71 4 81 6 L15 2 + P* 100 150 150 75 4 90 6 L15 2 ons . . i I I on to other p . . i th 4" throat can also be connected to 100mm Supersleve clay p can also be connected th 4" throat th 3" throat can also be connected to 75mm DIN 19522 Ens can also be connected th 3" throat P Nom System i i

. ngs w ngs have a sp ngs w ons for use w

i i i i C.I. + P means cast iron BS 416/DIN 19522 and plastic. Code Spec L2499 Cast L2449 Plast L2498 C L2497 Cast L2447 Plast L2496 C L2494 Cast L2444 Plast L2492 Cast L2442 Plast Satin finish Grat Grat * L2447/L2497 Vers L2442/L2492 To complete the connect complete To Durable, superbly fin Durable, superbly Connect Nickel bronze BS EN 1982 EN BS bronze Nickel Direct connection gratings connection Direct contour of ceram contour of Grat shown on page 6G nb sf Ruabon Johnson 4200 For connect nb sf 6G Direct connection gratings Grat ** C.I.+PmeanscastironBS 416/DIN 19522andplastic. * N4 ser N1 ser For connect To completetheconnect Connect Durable superblyfin For usew Nickel bronze BSEN1982 Direct connectiongratings Satin finish For 40mmp For 100mmp 40Ca uesee 104 2 7L52 L15 7 32 4" 100 C Claysupersleve Cast K2392 Plast N410 Plast N405 Cast N305 N303 N301 27*Plast N217** 25Plast Plast N215 N213** Code Spec 21Plast Plast N211 N112** 11Plast N111 Versions with castironbacknutforuseintimberfloors. Apr i ngs haveasp . i

l 2018 i i 105 dia. i es es 98 dia. System Nom P th ﬂex i i . on tootherp pework I i . i ons +P 0 "4 6L52 L15 6 48 4" 100 +P* pework

i i i i i i i i i i I 53 2 7 1 1 L15 1 L15 7 7 32 32 3" 3" 75 82 c DIN c 02 S eae3 1 1 L15 7 32 2"BSPfemale 50 c 4 1 40 c 02 S eae3 1 1 L15 7 32 2"BSPfemale 50 c 4 1 1 40 40 c c 4 1 40 c o S47 104 2 7 1 2 L15 1 7 L15 7 32 32 4" 3" 100 ron BS437 75 ron BS416 129 dia. 146 dia. i ble sheetﬂoor Tel i backnut Optional got lengthof25mmm i pework i shed andpart frame Cast iron : +44(0)1787 475151 i on acoupl i pework systems,coupl frame Cast iron . d i a i ng suchasv i . cularly su i ng orr 1 1 / / d 2 2 S eae3 1 2 1 L15 L15 7 7 32 32 " BSPfemale " BSPfemale i Fax a Throat 1 1 i / / . n 2 2

S 2 1 30 0 K3 K3 14 14 32 32 " BSP " BSP i i i

nches ng sealsocket : +44(0)1787 475579 mum i K2392 N2 ser For 40mm/50mmp For 100mmp ted toareas w i nyl . frame Cast iron i ngs are generallyava

Free area cm

es 2 142 dia. 143 dia. 129 dia. i i w pework s requ

160 dia. 176 dia. aperture i

th h i dth mm Max E-ma i gh volumeofpedestr i . pework

i red, as backnut Optional i l : sales@wade rat ls kg class Load i lable from thep i ng i llustrated onpage6 frame Cast iron ...... 9 2 0 3 2 3 2 2 1 4 7 6 i nt . co ][ H Sufﬁx Opt bottle trap i See sect . nclud uk

i an trafﬁc(w

i pework suppl F appl waste p may betapped2"or3") N4 ser Tapped toprov Web i N3 ser For 75mmp tted w i i ons ng ﬁlterbucketsandremovable i cat i : www . on 5Xforarangeofaccessor i . es maybetapped1"or1 i i i pes –spec ons th P i th sherard . wade i . es i

i 142 dia. n Torx screw(s) forsecur 129 dia. er i pework i . i de ad

. co i fy s i . zed cast uk i rect connect i ze BSP(N2,N3and . frame Cast iron i ron frame) . 5" i i ; on for es K2392 i ty . Direct connection gratings 6G ss 1 0 9 0 0 5 4 ...... l 2018 i pes – i ons i on Apr i nyl i ble sheet i K23 and K34 cat lable ; i i ng ﬁlter i ng class kg Load i rat . th ﬂex s ava

i . i uk

nclud . ty appl gh corros i i i co . es on for waste p . i i ng such as v nt i i . es to K2197, K2397 and i . er 3 i For use w ﬂoor K2397 wade on 10 . ron frame) ron i . aperture i kg dth mm . i w Max : www nless steel (Not K1897 n Sect shed as standard) i . rect connect rect i i 2 i

. th zed cast i Web i cm 2 s recommended and and s recommended th i i s pol i Free area area Free pework suppl i uk de a d . i ng such as ng such as i Free

co n Torx* screw(s) for secur screw(s) n Torx* . . i

area cm area . a i nt i ze BSP, 1" or 2" (appl ze BSP, i th P i led or epoxy i

nches i shed

on 5X for a range of accessor fy s i i n t i i Throat d Throat shed (K3497 es have sherard i i llustrated on page 6 ons i i n guard, for use w n guard, tted w i i son cells, showers and areas where h where and areas son cells, showers ble sheet floor lable from the p lable from i nches ser Tapped to prov Tapped Made of grade 316 sta spec K2497 only) (not K1897 or K2891) *Pin Hex screws if grade 316 specified. F n floors i i i . : sales@wade i

l . i

nyl, pol Pol Throat a i

i ng adaptor T1103 shown ng adaptor T1103 shown See sect bottle trap buckets and removable P M For use res Condensate funnel w verm ﬂex v Opt Sufﬁx H ][ K2197 K3497 i d red, as red, i on, pr E-ma i FFL mm

ve atmosphere, grade 316 grade ve atmosphere, Depth below Depth below pe us i . i ron frame) ron i s requ i ze i ght mm i th 2" BSP x 101H 60 4 35 2 Overall i . a mm he i pheral slot zed cast i i ngs are generally ava ngs are

i above FFL . Overall s ng food preparat i ng an aggress 101 d i : +44(0)1787 475579 th per ng i

i mum ng seal socket i

ze i . dth

i Fax i nclud n a i i i ng screw – w ng screw mm i a/w i mm Overall ons d at FFL i ng or r i Overall s es have sherard i Secur female outlet K2891 Flanged w K1947 Self secur cat i . . ng pools or hav ng pools or a a i i i d d . . mm . i pework systems, coupl on appl i on a coupl i i ed i ng i : +44(0)1787 475151 6mm ﬁcat . i Tel rement i pework pework got length of 25mm m i i i ng i + P* 100 176 60 4 26 6 K3 2 + P* 100 176 d + P* + P* 50 100 98 150 50 53 2" BSP female 4 11 58 14 6 K3 0 L15 1 + P* 100 176 60 4 48 6 L15 2 + P* 100 150 53 4 58 6 L15 2 + P* 100 140 50 4 13 7 L15 1 ...... I I I I I I I ...... ons . i on to other p P System Nom P System Nom gh spec i i s a requ ons such as sw ons such as i i th trowel appl th trowel nyl on ﬂoor i i

pheral slot, for use ble sheet ﬂoor n h t i i i i cat i

. . ngs can also be connected to 100mm Supersleve clay p ngs can also be connected ngs have a sp

i i stance i th per th flex i i C.I. + P means cast iron BS 416/DIN 19522 and plastic. K1897 C Spec Code Spec Code K3497 C K1947K2197 C C K2397 C K2497 C K2891 C res In appl Grat For connect K1897 W w Connect the connect complete To For use such as v Stainless steel Grade 304 steel Grade Stainless Direct connection gratings connection Direct on request (K18, K23 and K34 ser (K18, on request Satin finish * Grat For use w compos flange depth K2497 ss 2 6G Direct connection security gratings (square apertures) Square perforatedgrat L32 ser Secur L1947 For connect Grat To completetheconnect Connect For use Stainless steelGrade304 Direct connectiongratings female outlet Grat * i Satin finish on request In appl s arequ 39 C L3492 39 C L3491 39 C L3392 39 C L3391 39 C L3292 39 C L3291 39 C L3192 39 C L3191 29 C L2992 Code Spec 29 C L2991 14 C L1947 29 C L2196 C.I. +PmeanscastironBS416/DIN19522andplastic. Apr i i ngs canalsobeconnectedto100mmSupersleveclayp ngs haveasp . i i

l 2018 ng screw –w i cat i i n h rement i . ons suchassw i i es i gh spec System Nom P on tootherp i ...... ons . . . . . I I I I I I I I I I I I ...... +P 0 0 0 54202 1 2 L15 23 290 4 75 200 200 100 +P* +P 0 5 5 54102 1 1 L15 23 150 4 75 150 150 100 +P* +P 0 0 0 54202 1 2 L15 23 290 4 75 200 200 100 +P* +P 0 5 5 7 5 3L51 L15 23 150 4 75 150 150 100 +P* +P 0 0 0 547 32 K3 8 74 4 75 200 200 100 +P* +P 0 5 5 543 31 K3 8 38 4 75 150 150 100 +P* +P 0 0 0 547 32 K3 8 75 4 75 200 200 100 +P* +P 0 5 5 543 31 K3 8 34 4 75 150 150 100 +P* +P 0 0 0 54265L52 L15 5 216 4 75 200 200 100 +P* +P 0 5 5 54155L51 L15 5 105 4 75 150 150 100 +P* +P 010105 "BPfml 11 30 K3 14 11 2"BSPfemale 50 100 100 50 +P* +P 0 4 4 748 1 1 L15 8 82 4 57 147 147 100 +P*

. Tel i i got lengthof25mmm pework i th 2"BSP i ﬁcat : +44(0)1787 475151 i ng i i on acoupl i on appl pework systems,coupl i mm . d i i a ng poolsorhav . i cat L33 ser L2196 Ant secured) res For use w i ng orr i i Overall i i ons n ﬂoors dth mm -sl i Fax p mesh(grat i i i nclud n n t

i i

ng sealsocket : +44(0)1787 475579 mum i i led orepoxy es i ng anaggress i length mm ng foodpreparat .

i Overall

ngs are generallyava

i ng not i s requ he i i Overall pe us ve atmosphere, grade316 i ght mm E-ma i on, showersandareas where h i red, as i L34 ser secured w wedge proﬁle grat Streaml L29 ser M H Opt Pla buckets andremovable bottletrap See sect P secured) ng adaptorT1103shown i l : sales@wade

i i n mesh(grat Made ofgrade316sta (except L29ser F Pol *Pin Hex screws ifgrade316speciﬁed. *Pin Hexscrews lable from thep i d i tted w i i ons llustrated onpage6 a Throat i shed (notL33orL34ser i . ne heel-proof reverse

i i on 5Xforarangeofaccessor nches i th p i i i es es th P i nt . i co n hexscrews

i i ng not n Torx* screws forsecur . uk i area cm ng i i es) pework suppl Free i i Web s recommended and s .

2 i : www . i n Sect nless steel i gh corros Max . wade i w es) i i on 10 L31 ser (c Square perforatedgrat i . dth mm er aperture . . i rcular apertures) . i nt . . i co . i es on res i . ty appl uk i nclud i s ava i es i rat stance i i i cat ng ﬁlter gcaskg ng class Load

i lable

i ons i ng ...... 8 8 8 8 5 6 5 6 5 6 4 9 Direct connection security gratings 6G ss 3 8 8 8 8 7 6 6 5 6 5 1 3 ...... l 2018 th i i ons Apr i shed i lable i ng class kg Load ng ﬁlter cat i i i stance rat i s ava i uk nclud

. i

ty appl . i co . on res es i n guard, pol n guard, . i i es) nt i i . . . aperture er dth mm . i L2791 Condensate funnel w verm wade on 10 i 2 i . . kg w Max gh corros i : www 2 nless steel n Sect i . shed as standard – not L35 or shed as standard i i 2 de i Web rcular rcular Free Free s recommended and and s recommended s i i i ns

s pol i . i Free pework suppl area cm area i uk . area cm area ng nyl i ng i i co n Torx* screws for secur screws n Torx* ble sheet . i th a c i

n Hex screws

nt i . i th P es i es) es i nches i i th P i i th ﬂex

i . nches on 5X for a range of accessor i Throat Throat i a

i ne heel-proof reverse reverse ne heel-proof . shed (L2791 i i Throat d a llustrated on page 6 ons i i tted w i d i ng such as v i lable from the p lable from *Pin Hex screws316 speciﬁed. if grade Made of grade 316 sta F (except L35, L36, L37 and L53 ser Pol L36 ser i : sales@wade l i nged cover w

ng adaptor T1103 shown ng adaptor T1103 shown M Opt H L53 ser H P See sect bottle trap buckets and removable non-secured grat non-secured i Streaml grat wedge profile secured w secured For use w floor L37 ser red, as red, i on, showers and areas where h where and areas on, showers E-ma i below Depth FFL mm ght mm i ve atmosphere, grade 316 grade ve atmosphere, pe us Overall i i he ble i s requ i nyl i ng not x 100H 57 4 46 2 th flex i . i nyl a i i Overall ze above

ngs are generally ava ngs are FFL mm i

ng Overall i

i .

s ng food preparat length mm i ng an aggress i ble sheet 114 d i es : +44(0)1787 475579 es i ng such as v i i mum ng seal socket i i

. Fax n nclud i i p mesh (grat th flex i i ng such as v ze at i i dth mm -sl ons s i i Overall Overall i ng or r FFL mm i w Perforated grat for apertures) (square use w floor L39 ser cat secured), for use w secured), sheet floor Ant L36 ser i . . ng pools or hav ng pools or a i i a i d . d . mm i ble pework systems, coupl i on appl i on a coupl i i nyl i : +44(0)1787 475151 ficat i Tel pework th flex i pework got length of 25mm m i i i P nyl i ng not i

i + P* 100 173 173 98 4 150 23 L15 2 + P* 100 223 223 98 4 290 23 L15 3 + P* 100 175 175 98 4 150 23 L15 2 + P* 100 225 225 98 4 290 23 L15 3 + P* 100 175 175 98 4 105 5 L15 2 + P* 100 225 225 98 4 216 5 L15 3 + P* 100 173 173 98 4 34 8 K3 2 + P* 100 223 223 98 4 75 8 K3 3 + P* 100 173 173 98 4 38 8 K3 2 + P* 100 223 223 98 4 74 8 K3 3 + P* 100 135 135 55 4 31 6 K3 1 + P* 100 150 150 57 4 31 6 K3 1 + P* 100 150 sq ...... I I I I I I I I I I I I I . . . ons ...... ble sheet i i on to other p P System Nom gh spec i es es i System Nom i ng such as v i ons such as sw ons such as . i i rement

n h i i cat i th ﬂex

i . . ng such as v ngs have a sp ngs can also be connected to 100mm Supersleve clay p ngs can also be connected i

i i n mesh (grat i rcular apertures) for apertures) rcular i C.I. + P means cast iron BS 416/DIN 19522 and plastic. L3591 C Code Spec L2791 C Code Spec L3592 C L3691 C L3692 C L3791 C L3792 C L3891 C L3892 C L3991 C L3992 C L5395 C L5398 C s a requ Perforated grat (c use w L38 ser floor sheet floor secured), for use w secured), In appl Pla i on request * Grat Grat For connect L35 ser Connect the connect complete To For use Stainless steel Grade 304 steel Grade Stainless Direct connection gratings connection Direct Satin finish ss 4 6G Direct connection security gratings Grat * For connect Grat To completetheconnect Connect For use on request (K36ser In appl res K29 ser Satin finish Stainless steelGrade304 Direct connectionsecurity gratings Secur 39 C C K3694 Cast K3594 Plast K2991 K2941 Code Spec C.I. +PmeanscastironBS416/DIN19522andplastic. Apr i stance i i ngs haveasp ngs canalsobeconnectedto100mmSupersleveclayp . i i

l 2018 ty area dra i cat i n h i i System Nom P ons suchassw s arequ i i i . . gh spec es on tootherp I I i . . ons +P 0 7 042 31 1 K3 K3 4 4 20 20 4 4 60 54 176 150 100 100 +P* +P* i i 1 1 0430plugout2 4 50 114 110 c o S46 10145 30plugout2 4 50 114 100 ron BS416

i nage Tel i got lengthof25mmm i i rement es havesherard i i pework ﬁcat : +44(0)1787 475151 i i on acoupl i on appl pework systems,coupl i . mm . i d ng poolsorhav i i a cat K3594 P (4mm apertures) w Secur . i n Torx* screws i i ng orr zed cast i ons d Overall i i ty area dra a Fax . i i mm n nclud i

i ng sealsocket : +44(0)1787 475579 mum

i ron frame) i ng anaggress i ng foodpreparat . i ngs are generallyava he i nage Overall i i ght mm th . i s requ i i pe us ve atmosphere, grade316 d E-ma i a Throat i . on, pr i

red, as i nches i 2. 1. Note buckets andremovable bottletrap See sect P M Sufﬁx Opt K3694 w P as v Secur ng adaptorT1103shown i l : sales@wade i Pol i n Torx* screws

th flex standard product. asa notoffered be adequate,sosuchversionsare isunlikelyto butthedrainageperformance apertures with3mm K35 andK36seriescanbemanufactured pages insections6Gand6V). specifying option‘H’.(Seeothergratingandaccesscover have optionalfacilitytoaddPinTorx by securityscrews connectiongratingsandaccesscovers Many otherdirect i Made ofgrade316sta *Pin Hex screws ifgrade316specified. *Pin Hexscrews sherard i lable from thep i son cells,showersandareas where h nyl (4mmapertures) w i i i ons ty area dra llustrated onpage6 i shed i i ble sheetfloor on 5Xforarangeofaccessor

i area cm zed cast . i

nt Free . co i . nage foruse uk 2 i pework suppl i ron frame) i Web s recommended and i i 62plugout4 n 62plugout4 n i ng such i : www . i n Sect i nless steel(K36ser th Max w . . wade i

. dth mm i aperture on 10 i er . . i nt . i co . es . uk i i i i gh corros 1 1 L15 n 1 1 L15 n nclud i s ava rat i es have i i ng ﬁlter i gcaskg ng class Load lable i on . . . . 4 4 8 0 i

Direct connection access covers c 6V 7 6 . . l 2018 i . Apr ons . i cat Load ng class kg i i shment projects shment projects i rat uk . co . ron frame) ron ty appl i i nt i . er i wade . . on or refurb i zed cast nches i i

. : www Throat a on 10 i i . d Web n Sect pework suppl i i uk . co n Torx screw for secur screw n Torx . i also for restorat nt ; i es have sherard i th P i ght mm i Overall he llustrated on page 6 ons i i tted w i lable from the p lable from F i : sales@wade l i

Opt Sufﬁx H red, as red, i E-ma ng adaptor T1103 shown ng adaptor T1103 shown i s requ i Overall length mm ng areas and plant rooms ng areas i pe us i

tecture (K18, K23 and K34 ser (K18, K23 tecture i ngs are generally ava ngs are i . : +44(0)1787 475579 ce and park i ng seal socket

mm od arch mum Fax . i i a n i i Overall d n serv i ng or r i ‘SuperSeal’ (double sealed) L5791 . a i d . pework systems, coupl i on a coupl i : +44(0)1787 475151 floors such as floors such rement to match per to rement i Tel pework i got length of 25mm m i shed i + P* 100 176 – 60 4 M125 2 + P* 100 150 150 57 4 L15 3 . . I I . . ons s a requ i on to other p i P System Nom i unfin

n i

C.I. + P means cast iron BS 416/DIN 19522 and plastic. C.I. + P means cast iron BS 416/DIN 19522 Spec Code K5891 C L5791 C where there there where Sherardized, matt finish (cast iron frame) (cast iron matt finish Sherardized, Covers can be connected to 100mm Supersleve clay p Covers can be connected * Covers have a sp K5891 ‘SuperSeal’ (double sealed) To complete the connect complete To For use Connect Ductile iron BS EN 1563 + 1564 + EN 1563 BS iron Ductile Direct connection access covers access connection Direct For connect nb 1 6V Direct connection access covers For connect Covers w shown onpage6Vnbsf Vers Covers haveasp versions. ** Unsealed * L5291 ‘SuperSeal’ (doublesealed) K5591 K52 ser Covers w To completetheconnect Connect Durable, superblyfin Nickel bronze BSEN1982 Direct connectionaccess covers Satin finish Gasketed H (unsealed) Code Spec 54 Plast K5241 L5291** C L5193 C L5191 C K5791 C K5591 C K5491 C K5391 C K5293 C K5292 C 59* C L5391** 59 C C L5691 L5591 L5491 C i C.I. +PmeanscastironBS416/DIN19522andplastic. nged cover Apr i ons forusew . i

l 2018

i i

th 3"throat canalsobeconnectedto75mmDIN19522Ens th 4"throat canalsobeconnectedto100mmSupersleveclayp i i es System Nom P on tootherp i ons ...... i I I I I I I I I I I I I I n square frame ...... +P 0 5 5 84L51 2 1 L15 2 2 L15 2 L15 1 L15 L15 L15 4 L15 4 4 4 4 4 48 4 65 53 54 53 150 48 48 – – – – 150 – – 152 152 100 155 152 150 +P* 100 135 100 100 +P* 100 +P* 100 +P* 100 +P* +P* +P* +P 0 5 5 54L52 L15 4 55 150 150 100 +P* +P 0 6 6 04L52 1 L15 L15 4 4 60 42 160 135 160 135 100 100 +P* +P* +P 0 5 5 84L51 2 2 L15 L15 L15 4 4 4 48 57 55 150 150 150 150 150 150 100 100 100 +P* +P* +P*

7 3 53L51 L15 3 55 – 135 75 c i got lengthof25mmm i Tel th flex i pework i : +44(0)1787 475151 shed andpart . i i on acoupl ble sheetfloor i pework systems,coupl . d i a . H L5391/L5491 K5791 K5391 i (L53 unsealed) floor Recessed (19mmdepth)for ‘SuperSeal’ (doublesealed) appl Gasketed –forusew 4mm flangedepth ns i i cularly su nged coverw i ng orr d i de i i a i ed compos ng mater . . i /w Overall i ng suchasv L54hassealedcover Fax n i i mum dth mm i

ng sealsocket : +44(0)1787 475579

i ted toareas w . i al i i ngs are generallyava i th grat t i on ﬂoor

i nyl are

i th trowel length mm i ng Overall i s requ i ng i th h .

. .

E-ma i gh volumeofpedestr i red, as L5191 K5491 ][ H Sufﬁx Opt L5591 plunge andfootbaths Gasketed (double sealed) ‘SuperSeal’ Plug w buckets andremovable bottletrap See sect i

l : sales@wade

i gn cast i F (not K5491) spec 4" BSP) K5391 andL51ser Tapped toprov lable from thep i tted w i i ons llustrated onpage6 i i pe us he th ‘O’r i i Overall

fy s on 5Xforarangeofaccessor

ght mm

i ron p . i th P i i i ng adaptorT1103shown nt ze BSP1¼",1½",or2"(appl i . ng sealforuse co .

i i n Torx screw(s) forsecur pe us . uk i i an trafﬁc de ad i pework suppl Web i i es ng adaptorT1603shown ; d i L5193mayalsobetapped3" or rect connect : www . i a Throat . .

i nches i n . wade L5193 L5691 Gasketed (double sealed) ‘SuperSeal’ i er . . i nt . i i i co on forwastep n Sect es . i uk ty appl i i

es toK52ser nclud

rat i i on 10 Load gcaskg ng class i i ng ﬁlter i cat n Sect . i ons i pes – i i es, on 10 ...... 2 1 0 3 2 5 8 5 7 5 4 7 5 5 . Direct connection access covers 6V nb sf . 5 0 2 3 3 4 4 5 2 2 0 ......

. l 2018 i pes – i ons Apr i ron frame) ron i cat ng ﬁlter i i uk Load ng class kg nclud i . es to N2, N3 and i zed cast i ty appl i i co rat . es on for waste p i i nt i . . er i wade . th sherard or 2" (appl

i " 2 / 1 : www . rect connect rect i . nches ", 1 i 4

Web / . 1 Throat a i d pework suppl " BSP female" BSP female L15 L15 1 2 i 2 2 uk de a d an trafﬁc (w / / . i i 1 1 co n Torx screw(s) for secur screw(s) n Torx . i nt

ze BSP, 1 ze BSP, i th P i es and K5192) es i i on 5X for a range of accessor fy s i i llustrated on page 6 ons i i tted w i lable from the p lable from Tapped to prov Tapped spec N4 ser F i : sales@wade l ght mm i pework i

i Overall

Gasketed – for 100mm Gasketed – for 100mm p N4 ser See sect bottle trap buckets and removable Opt Sufﬁx H ][ he red, as red, i E-ma gh volume of pedestr gh volume i th h i s requ i mm . a i ngs are generally ava ngs are Overall i d nyl only

i . pework i ted to areas w ted to areas : +44(0)1787 475579 i es ng seal socket i

i mum Fax i n i . a i ng or r d i . cularly su pework i i ng such as v ng such as ‘SuperSeal’ (double sealed) – for 100mm p K5691 N3 ser Gasketed – for 75mm p i pework systems, coupl i on a coupl i pework i : +44(0)1787 475151 shed and part i Tel ron BS 416ron 75 142 54 3" L15 1 ron BS 437ron 100 146 79 4" L15 2 c 50 142 54 2" BSP female L15 1 c 40 142 54 1/ c 82 142 54 3" L15 1 c 50 142 54 2" BSP female L15 2 c DIN 75 142 54 3" L15 1 c 40 142 54 1/ ble sheet ﬂoor ble sheet i i got length of 25mm m i i i i i i i i + P* 100 176 60 4" L15 2 + P* 100 176 60 4" L15 2 . . I I . .

P System Nom System ons i on to other p i th ﬂex es i i

Versions with cast iron backnut for use in timber floors. with cast Versions pework pework i i N214**N216 Plast Plast N218**N302 Plast Cast N304 Plast K5691 C N409 Clay supersleve 100 146 79 4" L15 2 N306N404 Plast Cast K5192 C Code N212 Plast Spec Satin finish Covers have a sp For connect * iron BS 416/DIN 19522 and plastic. C.I. + P means cast ** K5192 Gasketed – for 100mm p Durable, superbly fin Durable, superbly N2 ser Gasketed – for 40/50mm p To complete the connect complete To For use w Connect Nickel bronze BS EN 1982 EN BS bronze Nickel Direct connection access covers access connection Direct ss 6V Direct connection access covers (unsealed) For connect floor Covers haveasp * K5697 floor For usew K5197 Covers canbeconnectedto100mmSupersleveclayp To completetheconnect Connect For use Stainless steelGrade304 Direct connectionaccess covers – forusew ‘SuperSeal’ (doublesealed) on request (K51andK56ser In appl res Satin finish L5897 C L5597 C L5398 C L5395 C K5697 C K5597 C K5397 C K5297 C 59 C K5197 Spec Code C.I. +PmeanscastironBS416/DIN19522andplastic. Apr i stance i i ng suchasv ng suchasv . i

l 2018 i cat i n h

i i th flex i ons suchassw i s arequ th flex i i gh spec System Nom P on tootherp i ons ...... I I I I I I I I I ...... +P 0 5 5 54 L52 L15 4 75 150 150 100 +P* +P 0 4 4 74 L51 L15 4 57 147 147 100 +P* +P 0 5 5 54 K 1 K3 4 55 150 150 100 +P* +P 0 3 3 54 K 1 K3 4 55 135 135 100 +P* +P 0 7 04 L52 L15 4 60 – 176 100 +P* +P 0 5 34 L51 L15 4 53 – 150 100 +P* +P 0 5 34 L51 L15 4 53 – 150 100 +P* +P 0 5 34 L51 L15 4 53 – 150 100 +P* +P 0 7 04 L51 L15 4 60 – 176 100 +P* i ble sheet i i i i got lengthof25mmm ble sheet nyl nyl Tel i pework i rement i ficat : +44(0)1787 475151 i i on acoupl i on appl pework systems,coupl i . mm i . es havesherard d i i a ng poolsorhav . i cat Gasketed – K5297 or epoxyres non-secured grat (unsealed) L53 ser H i nged coverw i ng orr i ons d i a i Fax n . i /w Overall i nclud mum

ng sealsocket : +44(0)1787 475579 i dth mm i i zed cast es for usew i n ﬂoor i ng anaggress . i ng foodpreparat i

i ngs are generallyava th ac i ng i i i i ron frame) ns pe us th t i rcular i de length mm i i s requ led Overall i i ng adaptorT1103shown ve atmosphere, grade316 E-ma i on, pr i . red, as 6mm ﬂangedepth K5397 appl Gasketed –forusew buckets andremovable bottletrap See sect P M ][ H Sufﬁx Opt res L5597 – ‘SuperSeal’ (doublesealed) i

l : sales@wade Pol

for usew

i i n ﬂoor have sherard Made ofgrade316sta F (not L53ser spec *Pin Hex screw ifgrade316speciﬁed. *Pin Hexscrew Tapped toprov and K5197) i lable from thep son cells,showersandareas where h i ed compos i tted w i i ons llustrated onpage6 i shed he i i

fy s on 5Xforarangeofaccessor

Overall

i ght mm i th t i th P . i i nt ze BSP, 1 . i co led orepoxy . i es) i i i t n Torx* screw(s) forsecur zed cast . i uk on ﬂoor i . de ad i

i pework suppl n Sect i i Web th trowel s recommended and 1 / 4 ", 1 i i d : www ng i . i rect connect ron frame) i nless steel(K51andK56ser i on 10 a Throat 1 . . /

2 i nches "

. or 2"(appl wade . res K5597 – ‘SuperSeal’ (doublesealed) (22mm recess depth) Recessed forﬂoor ‘SuperSeal’ (doublesealed) L5897 i er . for usew . i i nt .

n ﬂoor . i co i es on forwastep . uk i i i gh corros i es toK5297 nclud

ty appl

rat i s ava i th t i gcaskg ng class Load i i ng ﬁlter led orepoxy i lable i cat i i on ng mater i ons i pes – i es

...... 0 9 3 1 4 4 8 2 9 . i

al Uni-Level and Multi-Level Uni-Level and Multi-Level Uni-Level are designed for applications with asphalt/composition finished floors. Multi-Level are height-adjustable gullies designed for use with unfinished (e.g. bare concrete) floors.

Uni-Level Uni-Level are designed for applications with asphalt/composition finished floors. These fixed height gully assemblies include a membrane clamping collar to ensure a watertight joint between the gully body and membrane. Secured ductile iron gratings with load class L15 and M125, suitable for areas subject to car and light vehicular traffic, WB324 are removable without disturbing the membrane and provide excellent drainage performance. See pages 7.1 to 7.2.

WB514

Multi-Level Multi-Level are height-adjustable gullies designed for use with unfinished (e.g. bare concrete) floors. Multi-Level gullies include the facility for a membrane clamping collar to ensure a watertight joint between the gully body and membrane. Gratings are available to suit a range of requirements, from plant rooms to F204 pedestrian areas, of ductile iron or stainless steel. Drainage is also provided at membrane level via weepholes or a slotted collar. See pages 8.1 to 8.5.

WD704 1 Gullies for asphalt/composition ﬁnished ﬂoors . 7

; l 2018 i on to ng i i aperture dth mm . . i pework Apr i w Outlet thread Max 2", 3" or 4" BSP MEMBRANE CLAMPING COLLAR ve coat i . zes of p llustrated BODY es i i i uk . 2

co THREADED PIPEWORK ADAPTOR (SELECT SEPARATELY) . cm nt s ser i i . es ze as Free area Free i i zed protect i wade th th . i ch also serves to connect the i . wh : www zontal threaded outlet zontal threaded i Class fferent types and s types and fferent ng i th sherard i i Web WB33 ser Hor ncluded w SECURED FLAT GRATING i s i uk ng collar . i

ron w ron 2 i nless steel – WG301 ng to d on co i i ght-adjustable i . i th BSP threaded outlet are for connect are outlet th BSP threaded le i i nt ce of outlet type and s i i Load rat Load N/mm SLAB FINISHED FLOOR nstallat ons w i i – duct – – cho –

. ons a i cal i ng es i i ng to the body i 220 10 L15 130 13 i mm D vers ; : sales@wade Vari-Level grating K2501A shown in Section 5G ci when grating Vari-Level body shown in Section 5B, and used with any Vari-Level direct connection grating K2591A shown in Section 6G ci are also suitable for car and light vehicular traffic areas with an asphalt/composition finish. shown in Section 5G are gratings for use suitable Vari-Level in asphalt/composition finished floors subject to pedestrian bodies D10-D12, shown in traffic, if used with Vari-Level Section 5B ntcibm. l STRUCTURAL i lter bucket, sta Typ i grat Membrane clamp secured, non he secured, Notes 1. 2. Features Bod Grat Opt F 220 dia. E-ma 305 dia. pework i Outlet thread 5 2 1 5 5 9 6 0 8 2", 3" or 4" BSP ...... es kg i ls of adaptors for connect ls of adaptors i 2 Deta collar . area cm area Secured flat grating Body free Body free clamping cal threaded outlet cal threaded . i Membrane 5198 5448 0789 on to BS 416 p on to BS 416 . . . i : +44(0)1787 475579 WB32 ser Vert C mm Fax B mm cular traffic i pework adaptor i A mm rect connect rect i Outlet spigot conforms to BS 416 ght veh i got 238 60 – 19 8 got 165 87 – 44 6 got 190 112 – 78 7 i i i . type Outlet : +44(0)1787 475151 cal, threaded 90 – – 19 7 cal, threaded 90 – – 44 6 cal, threaded 90 – – 78 5 i i i zontal, threadedzontal, 119 14580 zontal, threadedzontal, 119 14567 zontal, threaded 183 90117 Tel i i i on 10 i 195 235 dia. got outlet are for d for got outlet are es , non-trapped, Uni-Level , non-trapped, i i ons i got outlet ze i i n Sect i s th sp Outlet i

. es w

i pework by means of a threaded p means of a threaded pework by i WB302 50mm Sp Spec Code WB303 75mm Sp WB304 100mm Sp WB322 2" BSP Vert WB323 3" BSP Vert WB324 4" BSP Vert WB332 2" BSP Hor WB333 3" BSP Hor WB334 4" BSP Hor WB324 For information on flow rates please contact our Services Department. Technical p shown are WB30 ser (Integral) sp Connect Bod Cast iron Cast l subject to car and For areas Gullies for asphalt/composition finished floors finished asphalt/composition for Gullies 7 . 2 Gullies for asphalt/composition finished floors adaptors forconnect Membrane clamp Bod Features WB514 Bod Connect For areas subjecttocarandl Cast iron Gullies forasphalt/compositionfinishedfloors secured, nonhe Grat grat Technical Department. Services onflowratespleasecontactour For information Height above B1 "BP191623 26 176 78 149 171 6" BSP 4"BSP WB516 WB514 Code Spec 2 2 15259 295 M125 5 320 x membrane Apr i S mm i i ng tothebody i es haveBSPthreaded outletandare forconnect es i ng . ze i l 2018 level. – cho – duct i ons N/mm Load rat i ce ofoutlets i , non-trapped,Uni-Level Outlet le s i ght-adjustable i ze i ron w Tel i 2 ng collar i

s : +44(0)1787 475151 i ng tod i ncluded w i th sherard i ng Class i ze as wh i fferent typesands i ght veh Outlet thread 4" or6"BSP mm . A i 320 x ch alsoservestoconnectthe i 405 dia. th 350 dia. 186 dia. i i llustrated zed protect Free area i cular trafﬁc i s ser cm Fax 2 Body free i area cm : +44(0)1787 475579 es . . i ve coat i zes ofp . Max 2 w i i . dth mm on top i aperture ng i pework are shown ;

kg . . i 9 4 pework bymeansofathreaded p E-ma 2. 1. Notes F Opt i l i Typ : sales@wade lter bucket,sta Section 5Bntcibm. traffic, ifusedwithVari-Level bodiesD10-D12,shownin in asphalt/compositionfinishedfloorssubjecttopedestrian Vari-Level suitableforuse gratingsshowninSection5Gare an asphalt/compositionfinish. with alsosuitableforcarandlightvehiculartrafficareas are connectiongratingK2591AshowninSection6Gci direct used withanyVari-Level bodyshowninSection5B,and Vari-Level gratingK2501AshowninSection5Gciwhen FINISHED i cal i FLOOR ons SLAB STRUCTURAL i n Sect i nstallat BODY i nt . co i on 10 i i on nless steel–WH402 . uk . Web COLLAR CLAMPING MEMBRANE : www i pework adaptor . wade i nt . (SELECT SEPARATELY) ADAPTOR THREADED PIPEWORK . co . uk . Deta GRATING SECURED FLAT MEMBRANE i ls of 1 Gullies for unfinished floors . 8 . . ) . a i th i l 2018 nage i i ng to zed i rect rect i i W 85mm L 225mm Ht 96mm Apr nd i ng collar i SLAB 150mm d th BSP . i rect waste or rect ple (for use w i i ; . n i MEMBRANE CLAMPING COLLAR nd uk i . m pes

. i

on to floor dra ons w . STRUCTURAL co i i . t i nt ngs i i on for ght i i cted) vers . ron, sherard ron, i s ; i i grat To take mult To waste p U602 wade n add de supplementary . i i on 9 i es body, es body, i red red i . ls of adaptors for connect ls of adaptors : www i pework ron i i ll be restr i Web eve extra he i Deta s requ i . th GD ser on to p uk nless steel – add suffix ‘B’ i i M1W (to prov ons where prov ons where . i 100mm . i rect rect . . i on co a i . C FLOOR SCREED i nage i . ng plug w cat i i nd nt D Ht 100mm ng w i g i i . – sta ght by between BODY i – add suffix ‘W’ to membrane clamp – select from Sect – select from on – Cast . SECURED FLAT GRATING SECURED FLAT i ngle nstallat i i n appl pe

i i FLOOR DAMP PROOF MEMBRANE

rect connect rect ons i pework adaptor nlets on: If us Code e i i i i cal . i nage at membrane level) i : sales@wade l i de lter bucket i i Typ dra May be stacked to ach (Caut Spec F Weepholes access to rodd 50mm and 69mm S To take s To waste p he Increases condensate dra For use U502 Extens U301 Opt Bolt-on funnels – Cast E-ma .

7 ; . ; on 10 i got outlet are for d got outlet are ; ng i i ts i m also serves ng i ; i th sp aperture n Sect . i dth mm kg . i i ve coat w ron ng l i i i : +44(0)1787 475579 Max Fax onal weepholes i n an adjustable collar 2 pework by means of a threaded p means of a threaded pework by i i cular traffic i ts cm i es D2-D8 and GD i zed protect red) – cast red) i i n the follow th opt . Free area Free i i ng s th ght above the body flange can on to p i i i i ght veh ng pework are shown pework are i i i . . (requ es D2-D8 and GD) w es D2-D8 and ned by means of grat i i . ts he i -Level ser i class th sherard i : +44(0)1787 475151 Load rat ng shown w i zes of p . – The grat i Tel ng to the body ng collar i i . ty ron w ron i t floor level w i l i on 5B, ser i i ght – 85mm grat i ght – 50mm ght – i M1 L15 130 13 3 le , trapped or non-trapped, Multi-Level or non-trapped, , trapped . i on 5B i s assembly ons i Collar i ght-adjustable ght can be obta i i . M101 on U301 a Code i i .

ng th th

– duct mum he n Sect i i – select from Var – select from i i mum he i ng n i ng i es es (see Sect i

i i ght adjustab Extra he extens For finished floors in pedestrian areas, gratings are also available made of nickel bronze or polished bronze. specify/order add suffix ‘NB’ or ‘PB’. For information To Services on their load rating, please contact our Technical Department. cast iron gratings, shown in A range of Vari-Level section 5G ci, and their direct connection versions shown in section 6G ci, are also available for use in unfinished floors. i fferent types and s types fferent i Spec Grat M101 C Max M shown by rotat be adjusted to su 220mm d Features Bod threaded outlet are for connect are outlet threaded Body w Grat D204 Connect Bod he secured, Cast iron Cast Gullies for unfinished floors unfinished for Gullies

Notes 1. 2. For information on flow rates please contact our Services Department. Technical d Membrane clamp For areas subject to car and l subject to car and For areas to connect the grat He 8 . 2 Gullies for unfinished floors He can beadjustedtosu by rotat 280mm d Weepholes M Max membrane level adaptors forconnect M301 Bod Features Med E2 ser Body w E204 Bod Connect For areas subjecttocarandl Cast iron Gullies forunfinishedfloors and Membrane clamp Grat weepholes protect M0 C C M401 M301 Grat Spec 244 S 617 76 4"BSP E204 Spec Body 266 S 7 12 176 6"BSP E206 444 S 829 78 4"BSP E404 466 S 7 29 176 6"BSP E406 i Apr extens Extra he ght adjustab i i M301 i i es haveBSPthreaded outletandare forconnect es i um Sump–vert ng i n . ng i Code l 2018 i i mum he i –med i ve coat i mum he –M401duct

th membraneclamp

ng th

i . i i Code a on U401SS grat es ; Outlet thread 4" or6"BSP . i alsoservestoconnectthegrat –toprov ght canbeobta 405 dia. i Collar i ons s assembly i um ordeepsump,vert i , non-trapped,Multi-Level i . . ng i ng 2L5301 10 10 12 11 300 200 L15 L15 E2 E2 h –M30133mm,M40161mm ght . i h –M30183mm,M401111mm ght i l ; i Tel ty he i ng collar –Thegrat i : +44(0)1787 475151 i i i cal threaded outlet ng tod . le de supplementarydra i i Load rat t floorlevelw ght-adjustable s i ron, M301cast i Outlet class ze BSP i ts he i ned bymeansofgrat i (requ i ng collar, weepholes fferent typesands i i ng ght veh i i ght abovethebodyflange ng s Free area i red) –cast 270mm sq M401 i th i cm ts . i Selectc i cular traffic i cal outlet n thefollow i 2 n anadjustablecollar i Fax ron, w Free area i

ng tothebody : +44(0)1787 475579 i nage at

Max cm i . i ron w w rcular orsquare i . th sherard i 2 i zes ofp . t mkg dth mm . aperture opt Deep Sump–vert E4 ser i ng i ng l i th i . onal s i . on top i m i i pework are shown ts i zed . i i ; es de kg . . ; . . i . . 7 0 4 0

pework bymeansofathreaded p 0 0 . i nlet E-ma i stacked toach Increases he S to grat F Opt U401SS Extens U502 For use Bolt-on funnels–Cast condensate dra 2. 1. Notes waste p To takes cal threaded outlet+ i Outlet thread 4" or6"BSP l Typ i : sales@wade i lter bucket de 405 dia. Section 6G ci, are alsoavailable foruseinunfinishedfloors. Section 6Gci,are connection versionsshownin 5G ci,andtheirdirect A rangeofVari-Level castirongratings,showninSection Technical Department. Services ontheirloadrating,please contactour For information To specify/orderaddsuffix‘NB’or ‘PB’. available madeofnickelbronze orpolishedbronze. also gratingsare For finishedfloorsinpedestrian areas, MEMBRANE CLAMPING i cal i i nlets ons i COLLAR ng Spec

i i

i pe FLOOR n appl n Sect i i nstallat ngle i . on -Sta –selectfrom Sect

i i nt ght by64mm,maybe –sta i Ht 100mm D . i nd i co i eve extrahe cat . FLOOR SCREED i on 10 Code nage i i a on . i uk . rect i 100mm i ons where prov nless steel–addsufﬁx‘B’ . i Web . s requ i nless steel : www i i ght i pework adaptor red i on 9(E4only) . . wade i n add U602 waste p To takemult grat i i s ron, sherard i MEMBRANE DAMP PROOF i on for nt i ngs . co i t i GRATING on toﬂoordra . uk i .

pes m i nd . . Deta i SLAB STRUCTURAL n BODY ; i i (forusew ple rect wasteor . 150mmd i i nd ls of t 96mm Ht L 225mm 85mm W i i rect zed i nage i th i a . ) . . 3 Gullies for unﬁnished ﬂoors . 8 on l 2018 i i Apr Membrane clamping collar (optional) Outlet to suit: 100mm or 150mm BS 416 zed i Code BODY STRUCTURAL SLAB th 4" or 6" . i zes of i DAMP PROOF MEMBRANE . uk . co GRATING . ng i nt i

nless steel w i wade 260 x 260 450 x 450 325 x 318 . – U1704 (F304 only) nged grat nless steel body nless steel i i : www nless steel, add sufﬁx ‘B’ ng collar fferent types and s types fferent i i i ron body and sherard ron i ron or sta ron ron h ron i Web i – sta le i – see table for collar Spec ng to d uk ron or sta ron i . i th cast i 75 on co 200 th BSP threaded outlet are for connect are outlet th BSP threaded i FLOOR SCREED . i duct F304, F306 W – Cast ons nt i i

es i Optional For finished floors in pedestrian areas, gratings are also available made of nickel bronze or polished bronze. specify/order add suffix ‘NB’ or ‘PB’. To For information on their load rating, please Services Department. contact our Technical Maximum and Minimum height adjustability dimensions for the non-ferrous versions are 113mm and 80mm (F2 series) 89mm and 56mm (F3 series) in 11mm increments. cast iron gratings, shown in A range of Vari-Level Section 5G ci, and their direct connection versions shown in Section 6G ci, are also available for use in unfinished floors. th cast 156 i lter bucket ons w i i FLOOR nstallat COLLAR i F Removable bell trap U1706 (F306 only) Opt Bod outlet Membrane clamp Notes 1. 2. CLAMPING MEMBRANE cal vers i ; lable w nless i i : sales@wade l i Typ E-ma pework aperture i dth mm .

i ons ava i w

ls of adaptors for connect ls of adaptors ; i ng i Max 325 x 318 268 x 268 396 x 396 4" or 6" BSP outlet thread Vers . ght Deta 2 i . ron body and sta ron i cm nged grat ncrements, ncrements, i ts he i Free area Free i ons to BS 416 p ons to BS ght – 82mm ght – i i ght – 46mm ght – i th cast me : +44(0)1787 475579 i 145 i ng nage at , non-trapped, Multi-Level , non-trapped, i i 27 F214, F216 W steel h 232 Fax es n 12mm i i class n an adjustable collar i mum he pework adaptor i i mum he i ts n Load rat Load i i 156 rect connect rect . i 88 M1253 M1253 P400* 280 P400* 280 280 280 19 19 19 19 3 M125 280 19 7 M125 280 19 ...... zed i ng s i on 10 i Membrane clamping collar (optional) ; ng ts i i : +44(0)1787 475151 de supplementary dra i n Sect i m ze BSP kg – The grat Outlet i Tel i stainless steel stainless s ty i l

i ng l . ght – 106mm ght – Max i or 325 x 318 268 x 268 396 x 396 i ght – 70mm 70mm ght – M got outlet are for d for got outlet are i 4" or 6" BSP outlet thread i s assembly a quarter turn at a t ons nged grat i i i – (to prov F2F2 4" BSPF2 6" BSPF2 4" BSPF3 6" BSP 42 F3 100mm BS 416 42 24 416 150mm BS 49 24 49 ...... ron body and sherard ron i es F3 ser es F3

th sp i i n car parks, yards, warehouses, plant rooms etc rooms plant warehouses, yards, n car parks, i ng th ron h ron mum he i Code i i mum he . i Grating seat must be fully supported to achieve load rating class.

Collar

n le i es w n the follow i pework by means of a threaded p means of a threaded pework by i i i ght adjustab i th cast i th pework are shown shown pework are 145 i i F204 C F206F214 C F216 C F304 C F306 C C Gully Spec Note:

Cast iron iron Cast Gullies for unfinished floors unfinished for Gullies For use * p duct F204, F206 W F204 F214 F204 Connect Bod to p Weepholes membrane level) For information on flow rates please contact our Services Department. Technical M Max F2 ser F2 by rotat above the body flange can be adjusted, w Features He 27 232 8 . 4 Gullies for unfinished floors WD30 ser below to p p Bod Features Vers WD304 Bod Connect For areas subjecttocarandl Cast iron Gullies forunfinishedfloors 220mm d coat Grat grat Membrane clamp He Technical Department. Services onflowratespleasecontact our For information see 'A' C qae24x24L51013 170 L15 224x Square C i pework are shown i clr220 d rcular i Apr 57 D1 D1 0m Sp 200mm WD618 WD518 D1 D1 "BPVert 6"BSP WD616 WD516 D1 D1 "BPVert 4"BSP WD614 WD514 D3 D3 "BPHor 4"BSP WD334 WD234 D3 D3 "BPHor 3"BSP WD333 WD233 D3 D3 "BPHor 2"BSP WD332 WD232 D2 D2 "BPVert 4"BSP WD324 WD224 D2 D2 "BPVert 3"BSP WD323 WD223 D2 D2 "BPVert 2"BSP WD322 WD222 D0 D0 0m Sp 100mm WD304 WD204 D0 D0 5mSp 75mm WD303 WD203 ght adjustable D0 D0 0mSp 50mm WD302 WD202 i i i i i i pework bymeansofathreaded p ng tothebody i es w i ons es ng rcular Square ng i Gully Spec 7 l 2018 ; –C Square –cast – med i i i llustrated havesquare grat th sp a . c i rcular –duct i ons 224 x i rcular grat i 305 dia. 235 dia. i i , non-trapped,Multi-Level 'B' dia. es um ordeepsump,vert . got outletare ford Code 195 S mm i ze Tel i

– ng collar i i a s i : +44(0)1787 475151 . WD6 – 90m WD5 – 94m WD3 – 78m WD2 – n Sect i ncluded w i ron w i ng, seetablebelow i le Load rat i i class ron w on 10 106 m wh 1 3 13 130 L15 i i th sherard ght veh Outlet s i ch alsoservestoconnectthe i i i ng th ze below WD32 ser i i . th sherard rect connect see 90 i i i i n, n, n, n, i ng, forvers 57 i 117 max 121 max 105 max cular trafﬁc,requ 133 max i i i s ser Free area cal orhor pework adaptor 7 i zed protect Fax cm i : +44(0)1787 475579 2 es . i zed protect i i i i o 1 1 21 314 – 210 – got o 9 1 812 78 – 112 190 got o 6 7–4 12 44 – 87 165 got o 3 0–1 13 19 – 60 238 got . i i i i i i i i otl hedd139 1 815 78 117 90 183 zontal, threaded otl hedd191567 145 119 zontal, threaded otl hedd191580 145 119 zontal, threaded a,trae 8 7 17 176 – 186 – cal, threaded a,trae 8 820 78 – 186 – cal, threaded a,trae 811 78 – – – cal, threaded a,trae 411 44 – – – cal, threaded a,trae 912 19 – – – cal, threaded i 224 x ons toBS416p 305 dia. 235 dia. i i i zontal outlet ons w es table Outlet 195 See type Max i w ve coat

i . dth mm aperture . i i Deta th r i i ng surfaceandsub-surfacedra ve i ng i . ls ofadaptorsforconnect . E-ma i pework mm A WD33 ser F Opt Extens Extens Technical Department. Services ontheirloadrating,please contactour For information To specify/orderaddsuffix‘NB’or‘PB’. available madeofnickelbronzeorpolishedbronze. also gratings are For finishedfloorsinpedestrianareas, Notes i l Typ i : sales@wade lter bucket ; i vers cal i ons mm i i on on B MEMBRANE i FLAT GRATING nstallat i ons w –96mmadd –35mmadd i BODY nt

224 x – WD2andWD3ser – WD5andWD6ser i . co es mm i i th BSPthreaded outletare forconnect on C . uk . . 544 13 519 13

i ng tod i nage overalowerlevelmembrane Web table i i See t t i i Body free onal he onal he area cm : www i fferent typesands . wade 2 i i 149 below ght ght WD6 ser see i i es –WG301 es –WG301 6 i ; ; COLLAR MEMBRANE CLAMPING SLOTTED COLLAR/ nt Cast Cast C (SELECT SEPARATELY) ADAPTOR THREADED PIPEWORK . co . uk i rcular Square i i FLOOR FINISH ron –WG501 ron –WG502 ...... 022 618 121 016 214 815 INSULATION 112 712 713 313 512 714 i i zes of . . 224 x es SLAB

405 dia. 'B' 'B' table kg See 336 dia.

i . on ...... 1 8 3 2 4 0 3 9 9 5 6 9 46 5 Gullies for unﬁnished ﬂoors . 8 46 3 1 9 3 3 7 4 8 6 7 6 6 ...... on l 2018 i i kg

Apr 336 See es table 'B' dia. i 405 dia. 200 x 200 SLAB zes of

i . . INSULATION ron – WG502 ron ron – WG501 ron 2 uk i i FLOOR FINISH . co . . nt i THREADED PIPEWORK ADAPTOR (SELECT SEPARATELY) Cast Cast 6 SLOTTED COLLAR / MEMBRANE CLAMPING COLLAR ; ; area cm area Body free 98 min. 149 WD64 ser es – WG301 wade 125 max. ght ght i . i i : www fferent types and s types and fferent i es – WG301 i onal he onal he 51913 54412 i i . . t t i i See C Web table mm ng to d uk i .

-Level i on co th BSP threaded outlet are for connect are outlet th BSP threaded i . i es GRATING nt i – WD64 ser – WD70-WD73 ser

i 200 x 200

BODY STREAMLINE – 35mm add – 96mm add ons w B i nage over a lower level membrane nage over nstallat i i mm MEMBRANE on on i i ons i cal vers i ; : sales@wade l i lter bucket i Typ WD73 ser Extens Extens Opt F E-ma pework i A mm ls of adaptors for connect ls of adaptors . i Non-trapped, Mult Non-trapped, Deta . . aperture dth mm . . i

w ng i gh Max i See 195

es table . zontal outlet i i 235 dia. 305 dia. ons to BS 416 p ons to BS i 200 x 200 . ne’ reverse i : +44(0)1787 475579 ng surface and sub-surface dra ng surface i r n, 113 max es i i i type Outlet Fax 2 cal, threaded – – – 19 12 cal, threaded – – – 44 11 cal, threaded – – – 78 10 cal, threaded – 186 – 78 19 cal, threaded – 186 – 176 17 cal, threaded – 210 – 314 17 zontal, threaded 119 145 80 zontal, threaded 119 145 67 zontal, threaded 183 90 117 78 14 i i i i i i i i i got 238 60 – 19 13 got 165 87 – 44 12 got 190 112 – 78 11 i i i pework adaptor ght adjustable cal or hor s ser i i i cm i ons where h ons where . i Free area Free n, 125 max he i rect connect rect ; . ve atmosphere, grade ve atmosphere, i WD72 ser cat i th th i i ch also serves to connect the lable on request i i dth i rement i an trafﬁc, requ wh on 10 i i nless steel grat steel nless s ava ng i i i on appl i ze i s : +44(0)1787 475151 ncluded w Outlet i sta class n Sect s a requ WD70 – WD73 – 86 m WD64 – 98 m i i ﬁcat i s Tel i ng an aggress ng collar

Load rat i – i th i th 5mm slot w i got outlet are for d got outlet are es um or deep sump, vert i i w i 200 x 200 nless steel – grade 304 ‘streaml ons stance i i i gh spec i ons hav i th sp i

ron ron n h Code i . – sta i ze – med – cat i on res i Gully i mm S WD702 50mm Sp WD703 75mm Sp WD704 100mm Sp WD722 2" BSP Vert WD723 3" BSP Vert WD724 4" BSP Vert WD732 2" BSP Hor WD733 3" BSP Hor WD734 4" BSP Hor WD644 4" BSP Vert WD646 6" BSP Vert WD648 200mm Vert ng es s recommended and s recommended es w i

pework by means of a threaded p means of a threaded pework by ng to the body i i i i i 200 x 200 L15 216 5 Spec ght adjustable i pework are shown shown pework are i WD70 ser Connect Bod For areas subject to pedestr For areas to p p Membrane clamp grat corros In appl 316 He For use wedge profile w wedge profile For information on flow rates please contact our Services Department. Technical Grat Features Bod WD704

Cast Cast Gullies for unfinished floors unfinished for Gullies Side inlets 9 ’ ][ nlet i l 2018 i . de i Apr . n i th suffix ‘ on (where on (where ons i i i cable) i t i w uk 5" BSP, 5" BSP, appl locat Denotes outlet pos Denotes s . . co body . . nt i nlet i wade . nlets tapped 1 : www i . of each ze de i i for the selected Web s on 2B 5 i . uk . th 2 s and i Code co . . 2B 1 [ ] nt i llustrat ons i i fy/order i locat : G304 fy i ons per i G304 body w . : sales@wade l i g . To spec To Quote the Spec e and the locat Spec ll i E-ma got ons es w i i i nless i pes from pes from i n that nat i i sta ; ze) i on of p on of i es where the es where i nage channels nage channels i ewed from ewed from i ble comb ron gully bod ron above 2", sp i i v ; : +44(0)1787 475579 es, . . i nlets are usable by usable nlets are Fax nlets moulded- i fy thread s fy thread i te i i n cast i . de i ns, from dra ns, from i pework for all poss these i ; nlets i cal outlet zontal outlet i es are located completely above located completely es are i i de i cal gully bod i Codes . pework i t the underfloor connect underfloor t the i t BS 416 p i n G102, H102 and GD ser n G102, H102 c p i i th hor th ‘P’ or ‘S’ trapped outlet th vert : +44(0)1787 475151 i i i Spec . Tel es i nks and wash bas nks and wash i ed to su i es w es w es w se requested, s se requested, i i i i c gully body has three s c gully body has three ally below the water level ally below i i . ons represent typ ons represent i n Wade trapped gull n Wade n a gully perm n a gully i i es have BSP female threads up to 2" threads es have BSP female i ed as BSP female threads (spec ed as BSP female threads

i ons plast i and show the ng knock-outs from the body on s ng knock-outs from i nlets nlets i i llustrat

i locat ll accept 50mm plast de de i i i nlets are part nlets are nlets are suppl nlets are 3A 2A 2B 2C 1A 1B 1C Gully bod 1A 1B 1C 2A 2B 2C 3A Gully bod 1A 2A 2B 3A 4A 3A 2B 2A 1A Gully bod steel bod Unless otherw of be suppl S except the water level, above, remov

S Side inlets Side and from other gull and from The i i GP1104 w fixtures such as s such fixtures Adaptors 10 2 3 7 6 4 6 6 2 2 ...... 1 0 0 0 0 0 2 0 3 ng etary etary etary etary etary etary etary etary etary etary etary etary etary etary etary etary red red i c i i i i i i i i i i i i i i i i i i pework i l 2018 i coupl Requ Apr Code kg Adaptor . T601 T602 T603 T1603 T1501 T1203 T1202 T1201 T1103 8 Propr 1 None 2 Propr 22 Propr None 1 Propr 2 Propr 2 Propr 6 Propr 6 Propr 14 Propr 8 Propr Propr 4 Propr 9 T1603 Wade 9 Propr 57 Propr Propr 5 Propr 2 T1501 Wade ...... Spec 1 1 nt (ABS) T1704* p Threaded plast adaptor, i nt nt uk i i . gn i co ng ng to . i i nt i . zed 0 zed 0 zedzed 0 0 zed 0 i i i i i c i c ron caulk jo ron i i pework wade ron caulk jo ron ron caulk jo ron i al kg . i i i † † etary coupl i : www ron ron ronron 2 4 ron 1 ronronron 1 1 1 ron 1 c (ABS) 0 c (ABS)c (ABS)c (ABS) 0 0 0 c (UPVC) 0 c (ABS) 0 i i i i i i i i i i i i i i i ons i ld steel, sherard ld steel, sherard ld steel, sherard ld steel, sherard ld steel, sherard Web i i i i i T1702* p Threaded plast adaptor, (ABS) pe before connect pe before i uk . Adaptor must be brazed/ Adaptor must . ngs made by others ngs made i co . nt i mm Mater es i Length . D . 5482 60 140 Plast Plast 50 90 Plast 87 90 M 6084 90 90 M M 87 90 M 60 90 M : sales@wade l mm O 110 126 Plast 160 166 Plast 122178 130 130 Cast Cast 111 90 Cast 110 120 Plast 111 90 Cast 162 90 Cast 162117171 90 90 90 Cast Cast Cast 111 90 Cast i pework and fitt pework and i 75mm BS 416 75mm DIN 19522 Ens 100mm BS 416 100mm 110mm plast 100mm BS 416 100mm 100mm copper 75mm BS 416 75mm copper 2" BSP female 50mm cast 3" BSP female cast 75mm 4" BSP female 100mm cast 50mm BS 416 50mm copper 100mm BS 416 or BS 437 100mm 100mm Supersleve From Connect To From T12 ser BS 416 Copper to p to copper soldered a propr BS 416 by means of E-ma

. T501 T301 T303 T103 T502 T302 T102 T101 T108 T104 T102 T103 T104 T105 T106 T101 T103 Code Spec T1802 T1702* T1704* th BSP . i . on a es w i i vely to i Code . BSP ng BS 416/437 ng BS 416/437 i

Body outlet : +44(0)1787 475579 . ng 75mm BS 416 i Fax ces Department i gn i ly and effect i mm . pework adaptors, shown . i a Nom i d T1603 MJ coupl to Ens T1103 Push ﬁt coupl to Supersleve cal Serv i cated lable to connect Wade products to p products Wade lable to connect i i red to pass through a slab, to pass through red nd i i c i lable to enable gully bod i To complete the connect complete To . nt i ncrements up to 900mm ncrements i : +44(0)1787 475151 s ava gn + SMU) 100 4" gn) 75 3" gn + SMU) 50gn + SMU) 2" 150 6" red as red i i i i i i ngs are ava ngs are Tel i pe) 100 4" pe) 50 2" i i pework adaptors i ve range of threaded p ve range of threaded i n 10mm i ons n general use i i ng table, i es ng BS 416 to plast i i

fy/order add ‘#’ and length (mm) to Spec fy/order i in lengths greater than 600mm is mild steel, sherardized. ng may be requ ron DIN 19522 (Ens ron ron DIN 19522 (SMU)ron DIN 19522 (Ens ron 75 3" ron BS 416ron 100 4" ron BS 416ron BS 437ron BS 437ron DIN 19522 (Ens ron DIN 19522 (Ens ron 150 100 150 6" 4" 6" ron BS 416ron 75 3" ron BS 416ron 50 2" c502" c823" cc 110 160 4" 6" i i i i i i i i i i i i i i i i ls, please contact our Techn pework

i nless steel (Europ nless steel (Europ i i i pework system i T103 P Plast Plast Plast Plast Clay (Supersleve)Clay (Supersleve) 100 150 4" 6" Cast Sta Cast Cast Sta Cast Cast Cast Cast Cast Cast Cast Cast HDPE 100 4"

n the follow * Solvent weld socket. † A comprehens Threaded p Threaded T1501 MJ coupl T6 ser for caulk jo Hub adaptor Connect coupl Adaptors and coupl Longer lengths, such as requ can be made i (except T401, T501, T502, T1702 and T1704) To spec To all p

threaded outlet to be connected speed threaded both ends, for adaptors may also be threaded On request, deta Adaptors Specialised applications Specialised applications Over the years Wade has been asked to provide solutions to various drainage problems. This section includes examples of products, originally designed for a particular project, but which have become available for use elsewhere. Please browse this section to see the full range, a sample of which is illustrated below. Soil Damp proof Typical installations membrane

Water Membrane Water Membrane clamping collar clamping collar

Screed Membrane Screed Membrane K3202 Overflow gullies for decorative pools, baptismal pools Vari-Level Vari-Level Vari-Level body andGaske fonts.t Gasket body See page 11O. body

Slab Slab

Soil Damp proof membrane

220 dia. Flexible sheet flooring 160 dia. P901 Clamping collar Drainage of planting Grating areas and roof gardens. See page 11P. Floor screed 103 Vari-Level 50 bodyRemovable 157 dip tube Structural slab Removable bucket Body 56 dia. Membrane 110 dia. clamping Membrane collar

Bedding Grating P14 series 90° gully for use in Tiles shower areas etc. See page 11S.

Flexible sheet flooring Clamping collar Grating

Floor screed GV6103 Gully assemblies for flexible Removable sheet flooring such as vinyl. dip tube See page 11SF1 – 11SF2. Structural slab Removable bucket Heavy duty lorry deck gully 11 HD1 – l 2018 i – Apr on i cat i on i t i uk . co ty appl . i nt i fy pos i – add sufﬁx ‘M’

wade . : www – add suffix ‘W’ – add suffix ‘W2’ nless steel i Web uk . co . nt i n Torx* screws for secur screws n Torx* – add suffix ‘F’ – spec i th P i ons i : sales@wade l i tted w i add suffix ‘H’ Weepholes (upper flange) (upper Weepholes flange) (lower Weepholes Dimensions can be amended to suit specific application Services Department with your please contact our Technical requirements. Opt Lower flange F *Pin Hex screws if grade 316 specified. Made of grade 316 sta E-ma

5 . 220 ce and i 90 ng i with peripheral slot (secured) Solid grating gned for use gned for use 80 tba i class kg matt finish matt : +44(0)1787 475579 Load rat . Fax 166 sq. 20 nage slot, des nage slot, i aperture aperture dth mm . i w Max pheral dra i 350 sq. 200 sq. 166 sq. : +44(0)1787 475151 and PVC DIN 19522 gh loads such as lorry decks, serv gh loads such as lorry Outlet to suit i Tel 2 th per 100mm BS 416/ onal lower flange may be used as a deck onal lower flange may i i ng free ng free i Opt nless steel, secured i . area cm area Grat

– Sta

ng flange and/or a membrane flange ng flange and/or a membrane Grating seat must be fully supported to achieve load rating class. Grating seat must be fully supported to achieve i

. ng ng areas i

i Spec Code Q904 144 20 P400* 17 Lower flange (optional) Membrane flange with upstand Note: n areas subject to h n areas Heavy duty gully w Heavy duty i park mount Features Grat * Q904 Stainless steel – grade 304, grade steel – Stainless Heavy duty lorry duty Heavy gully deck Large gullies L1 11 4 4 0 . . . l 2018 i ng i ng i class kg Q5 . ng i Load rat uk Apr class kg . ckel bronze ckel bronze 128 i co . Load rat nt i Code C s ron grat ron rect rect i 2 – add suffix ‘D’ . i i ng – n i 55 Min. Filter bucket (optional) Secondary strainer (optional) wade nd . i Membrane clamping collar (optional) ner c coated i ng free ng free i i 274 – add suffix ‘F’ Backwater valve (optional) To suit 100mm To BS 437 pipe area cm area – add suffix ‘B’ – Spec th cast – add suffix ‘V’ i : www Grat an traffic only de outlet i i 2 n, or an i Web ron, plast ron, ron, lacquered lacquered ron, 633 i i ckel bronze i ng free ng free lable w i i 4" BSP ze 209 295 x 295 uk i an traffic areas ng collar . i i area cm area – n co Grat

. ron, lacquered grat lacquered ron, 90 i mm Non-secured grating – cast – cast Threaded, sealed rodding access ckel bronze

nt i i

als – add sufﬁx ‘B’ i 209 dia. 177 dia. Outlet s ver, for pedestr ver, – n i es i n pedestr i

– cast

ng ons also ava

i i 221 al al ons ons i i i i . . 50 red red grating i nless steel secondary stra nless steel ﬁlter bucket 289 i i : sales@wade Grat Body Q302 Body Q301 Body Access cover l i lter bucket i Spec Code Spec Code Q301Q302 205 205 L15 L15 22 22 Q501 100mm BS 437 125 L15 40 Non-secured 405 Sediment bucket (optional) Other mater Vers

Mater For use as a hopper dra For use as waste rece Mater

Gunmetal backwater valve Opt F Membrane clamp Q501 Q3 ser Opt Flange and membrane clamp Sta Sta requ For use where a trapped s For use where Membrane flange and clamp (optional) E-ma 0 0 . . 0 . ng i ng i class kg Load rat class kg 88 Q4 : +44(0)1787 475579 . 280 Load rat 44

Fax 'A' 41 ng Filter bucket (optional) i 2 Hinged grating Code C 2 . zed zed i i ng free ng free i ng free ng free i area cm area area cm area – add sufﬁx ‘B’ – Spec – add sufﬁx ‘C’ Grat ng and i Grat ng areas, ng areas, i c 1250 90 M125 100 Trapped gully Trapped i . To suit 100mm To or 150mm pipework ce and park i scharged , where very large large very , where 699 x 717 609 x 627 i : +44(0)1787 475151 . 260 x 260 ron, sherard ron, ron, sherard ron, 450 x 450 323 x 316 i i Tel ron grat ron ze ze i i i ng collar ng collar i i le le 60 i i le es, serv i i mm ce and park

i nless steel nless steel, grade 304

i i 125 Outlet s – duct – duct es i

n factor n serv – sta – sta

60 ng ng Rodding access plug i i

i i al al 'A' nged duct 150 ons ons es, warehouses etc es, warehouses i i i i i i . . To suit To ng access i

nless steel ﬁlter bucket collar i 100mm pipe 127 Grat Body Body Grat th h i clamping (optional) Q403 100mm BS 416 280 M125 23 Code Spec Code Outlet s Spec Q105 416 & plast 100mm BS Q106 150mm BS 416 1250 100 M125 100 Membrane Membrane clamping collar (optional) Non-secured grating volumes of water are d volumes of water are areas, warehouses etc warehouses areas, For use Membrane clamp Sta Opt Mater Q403 Opt Membrane clamp

Q1 ser Large gullies Large Mater

rodd For use factor w L2 11 Large gullies For use Mater please refer toour‘LinearDrainage’brochure. please refer Wade awiderangeoflineardrainageproducts– manufacture Note Secured grat Membrane ﬂangeandclamp Opt Q605 Large gullies 153 6530Ant 360 Q605 6525Streaml Pla 245 360 Q625 Q615 6510Perforatedc 100 Q635 659 efrtdsur 33 K3 Perforatedsquare 95 Q645 Code Spec Apr Body andgrat 63

. i i i l 2018 ons al i

n guttersandtrenches

Grat area cm i ng i ng free – addsufﬁx‘L’ i Tel ng 2 : +44(0)1787 475151 –sta suit BS416/ DIN 19522/ 327 x176 400 x250 Outlet to 110 OD plastic i nless steel,grade304 i i ehL53 L15 n mesh -sl Grat i ehL53 L15 p mesh –addsufﬁx‘F’ type i eL53 L15 ne i ng Q605F i clrK 3 K3 rcular Fax Load rat : +44(0)1787 475579 (optional) flange andclamp Membrane ls kg class i ng . . . . . 7 7 0 0 6 E-ma 277 x294 Q8 ser aga For use Mater

i l 8110m8m 8 / 22 N/A 185 89mm 100mm Q801 Code Spec 8210m16m15NA22 N/A 185 116mm 150mm Q802 : sales@wade 192 x242 Backwater valve Body andgrat i nst backﬂow . i al i n poolsorp

i es Outlet 25 s i nt i ze

co . i uk i s requ ng –gunmetal i ts where safeguard –sta Web A

i red : www i nless steel,grade304 345.5 Grat . wade area cm i ng free i nt . co 2 . uk Load rat ls kg class ‘A’ i ng BS 437pipe or 150mm 100mm To suit . . 0 0 Gunmetal gullies – non-trapped M1 11 l 2018 i t i Secured removable grating Deck mounting flange Secured removable grating Flexible sheet flooring Deck mounting flange uk Apr . ngs to su i co . nt i wade . ght adjustable by means ght adjustable i : www 76 dia. 170 dia. 230 dia. 150 dia. 155 dia. 190 dia. 142 dia. 129 dia. Web ngs are he ngs are ce of outlet and grat ce of outlet i i uk . co . Grat . nt th cho i i ps i 6 1 1 30 . . 5 lable w i 158 ng See table i : sales@wade gs and sh l i i 140 l r 3 Min. 27 Max. i Min.= Flush Max.= 70 class kg E-ma Load rat ons are ava ons are i 0 . Vers . ng aperture aperture i dth mm . i w Max class kg Load rat 2 : +44(0)1787 475579 nyl i Fax ng free shed floor level shed floor i i n metal decks such as on o n metal decks i area cm area ng Grat i aperture aperture dth mm . i w on at fin on 32 7 L15 4 i i ng such as v Max i on on floor i i t 2 i es are for use es are nstallat i i Outlet ng free i : +44(0)1787 475151 connect . ng i area cm area Tel Grat ble sheet floor shes i i

le or compos

i ze mm th t th ﬂex es ze mm i Outlet i i i Outlet i s

r thread, enabl r thread, i . .

fferent floor fin fferent i P502 50 *Copper connect P501 50 2" BSPT male 32 7 L15 4 Spec Code Spec Code P301 75 48 7 L15 8 * Please advise copper pipe specification. Note Deck mounting flange can be drilled to suit specific requirements. Services Department. For information on flow rates please contact our Technical P5 ser Note flange can be Flanged outlets also available. Deck mounting drilled to suit specific requirements. P301 Non-spark gunmetal gull Non-spark For use in metal decks metal use in For Gunmetal non-trapped gullies non-trapped Gunmetal of the d For use w For use w M2 11 Gunmetal gullies – trapped For usew For usew Department. onflowratespleasecontact ourTechnicalFor information Services to suitspecificrequirements. Flanged outletsalsoavailable.Deck mountingflangecanbedrilled Note P4 ser drilled tosuitspecificrequirements. Flanged outletsalsoavailable.Deckmountingflangecanbe Note P4 ser grat adjustable bymeansofthe Non-spark gunmetalgull For useinmetaldecks Gunmetal trappedgullies Code Spec Code Spec 437 6151 1 28 L15 11 125 76 75 P403 441018167L530 28 L15 L15 7 7 106 106 108 76 100 75 P414 P413 30 L15 11 125 108 100 P404 Apr i ngs tosu . . i l 2018 s s i i Outlet Outlet i i i i ze mm ze mm es es th flex th t i i

le orres t d

i i ble sheetfloor fferent floorfin D D Tel mm mm i i a a : +44(0)1787 475151 . . A A i n floor i es w Grat Grat i area cm area cm r thread, enabl i ng i i i ng free ng free th deepsumpbodyare foruse i ng suchasv i shes andremovable belltrap 2 2 Max Max w w Fax i i i . . dth mm dth mm ng aperture aperture : +44(0)1787 475579 i nyl i nstallat Load rat Load rat i on atfin ls kg class kg class i i ng ng . i i n metaldeckssuchasono shed floorlevel E-ma Max. =75 Min. =Flush Max. =75 Min. =Flush . . . . 0 0 0 0 316 316 i l : sales@wade 75 Seal 75 seal 6 . Vers i nt . co i ons are ava . uk Web i l r i 257 dia. 325 dia. 230 dia. 257 dia. 'A' dia. gs andsh 230 dia. 250 dia. 325 dia. 'A' dia. : www i lable w . wade i i ps th cho i nt . . Grat co . uk i ce ofoutlet, i ngs are he flange Deck mounting bell trap Removable flange Deck mounting bell trap Removable grating removable Secured flooring Flexible sheet clamp Sheet flooring grating removable Secured i ght Overflow gullies O 11 l 2018 i s i Gasket Slab Slab Membrane clamping collar Membrane uk Apr . co Membrane clamping collar Membrane . ves excess or surges or surges ves excess i nt i wade . pe rece i : www Web ly removed when the pool/font when the pool/font ly removed i uk . on on co s eas i i . i nt i pe i nless steel standp nless steel i nstallat nstallat i i Water cal cal Water Screed i i Vari-Level body : sales@wade shed, sta l Tiles i Vari-Level body i Typ Typ The standp . E-ma on 5B i nyl, mum, a pol i i 8 8 . . n Sect i ns i red max red i ng such as v ed res i i : +44(0)1787 475579 . Fax sh les etc i i ng the requ i . n trowel appl n trowel i ble sheet floor i -Level body, shown -Level body, i certa Flex . on 5X i pe lengths, add ‘#’ and i . a any Var i : +44(0)1787 475151 Code ed of water . Tel i pe length (mm)pe length (mm) Marble, t i i scharge v scharge i es – select from Sect es – select from i

thout cap 50 1 th cap 50 1

i i fy/order other standp fy/order i Code Floor ﬁn Code B kg . . red to be empt red i

K3212 + Standp Spec K3211 + Standp K3201 W Spec K3202 W Accessor K3212 length (mm) to Spec K3211 To spec To K3201 To prevent the depth of water exceed the depth prevent To For decorative pools, baptismal pools and fonts and pools baptismal pools, decorative For Overﬂow gullies Overﬂow of water for d of water for requ Drainage of planting areas and roof gardens P 11 3 3 . . kg l 2018 i . l i 2 Grating Frame Perforated ballast guard (3 dia. holes) Clamp collar zed i ron, lacquered ron, i 12 dia. Removable dome area cm area Dome free Dome free uk Apr . co ng loss of so ng loss of i . – cast Perforated stainless steel dome (3 dia. holes) s nless steel nt i i i ron, sherard ron, m i i 220 dia. n i le i wade asphalt) 115 1 . . – sta thread 104 dia. 4" NPSM nc i : www – duct

ng Web i al i uk . Grat on 46 co i Ballast guard length is manufactured to specific requirements: 100mm min. . Mater guard Ballast collar Frame/clamp nt i – PVC nless steel i type Membrane Standpipe length is manufactured to specific requirements: 200mm min. pe i Sta Installat – copper

al: al i i

. ng areas and ﬂower boxes, m and ng areas i : sales@wade Dome Standp l i P1001 1 Sheet or brush on 115 0 Spec Code P1002 2 All types ( Mater Mater E-ma n plant i s i sture sture

i ; l i D10-D12 series body Vari-Level body Asphalt Dome . membrane Gravel membrane Damp proof nage of mo Membrane i : +44(0)1787 475579 on 5B i Soil Fax ng dra i s concealed by so n Sect d i i i Soil s concealed by Slab i 0 7 pe . . i Type 2 Type nage i t asphalt or sheet/brush i es shown i : +44(0)1787 475151 C2-C5 series body es, Tel i th i lable to su s i i membrane

-Level bod

Damp proof i red at the red

i pe length (mm) 0

i es bod i ons where the standp ons where ons where a ons where ons where all dra ons where es i i i i es es th Var i i ons ava i n a paved area, n a paved area,

for use w i cat cat cat Soil i i i i ; s requ i Code kg Code kg . . red

i ng vers i Slab bm ; i l i P901 + Standp Spec Spec P801 + length (mm) 4 Type 1 Type P10 ser P9 ser Load rating class: K3 P8 ser roof gardens roof Drainage of planting areas and and areas of planting Drainage for use w requ surface, access or where D10-D12 ser shown on page 5B ntc For appl For appl grat removable for access purposes removable For appl so on membranes Wade offers a range of products prov a range of products offers Wade 90° gullies S 11 l 2018 i nless i .

. Apr ons i cat n Torx* screws for screws n Torx* i i uk . co th P i . nt i ty appl Membrane clamping collar Body Grating i grating ons i tted w wade i . *Pin Hex screws if grade 316 speciﬁed. steel (P1422 – P1424) Made of grade 316 sta F secur

i M Opt Sufﬁx H : www Web nstallat i 2 2 6 6 3 3 ...... uk Membrane . cal i Bedding co Tiles . nt Typ i stainless steel stainless aperture aperture aperture aperture dth mm kg dth mm kg . . i i w w or Max Max : sales@wade l i E-ma Load Load ng class ng class i i rat rat 2 2 Secured removable grating nickel bronze nickel ng free ng free ng free ng free i i area cm area area cm area Grat Grat : +44(0)1787 475579 Fax ng ng i i nless steel 40 K3 8 6 nless steel 40 K3 8 6 nless steel 40 K3 8 7 i i i ckel bronze 82 K3 6 6 ckel bronze 82 K3 6 6 ckel bronze 82 K3 6 7 i i i

ng ; i B B ng i mm Grat mm Grat ckel nage i zes i i zontal on of a : +44(0)1787 475151 i i A A s of n Tel i mm mm ng n three s n three i i

body and clamp with clamp with body and The lacquered The lacquered nless steel . ze ze i i i es s s i lable Outlet Outlet ng non-trapped gully ng non-trapped i i

n areas where dra where n areas i red at the junct red i

nless steel grat . . ron body has hor ron i i

ckel bronze grat ckel bronze i P1414 4" BSP 65 137P1424 N 4" BSP 65 137 Sta P1413 3" BSP 52 151P1423 N 3" BSP 52 151 Sta Code Spec Code Spec P1422 2" BSP 39 164 Sta P1412 2" BSP 39 164 N s requ Sta N P14 ser For use in shower areas etc. areas shower use in For Cast iron 90° gullies gullies 90° bronze or sta or bronze the secured grat the secured cast wall and floor outlet, ava A flush fitt for use i Double sealed sliding access cover Double sealed sl For man entry for use with flexible sheet flooring such as vinyl Stainless steel – Grade 304

Wade has solved the problem of access to inspection chambers and service ducts within buildings where sheet ﬂoor covering is used. A watertight joint formed between the sheet ﬂoor covering and the edge of the frame, prevents water from seeping into the structure. i d i ng access cover for man entry

Easy open sliding mechanism can be opened and 32mm closed safely by one person.

Visible width is clear W opening plus 152mm (Overall frame is additional 28mm)

Reliable – Floor material edges remain clamped even Clear Load when cover is removed. Spec. opening Overall Opening Man rating Hygienic – No holes, recesses or dirt traps. Code size mm size direction entry class kg RS231 450 x 450 684 x 684 – x K3 21.7 Air tight – Double sealed by closed cell neoprene RS232L 450 x 600 684 x 834 Length x K3 25.6 gaskets to meet all current building RS232W 600 x 450 834 x 684 Width x K3 25.3 regulations. RS233 600 x 600 834 x 834 – K3 29.7 Safe – All edges of floor material are securely RS234L 600 x 750 834 x 984 Length K3 34.2 clamped in position by concealed clamp RS234W 750 x 600 984 x 834 Width K3 33.8 strips. No steps or exposed edges. RS235 750 x 750 984 x 984 – K3 38.8 Unobtrusive – When installed only a 50mm wide RS236L 600 x 900 834 x 1134 Length K3 38.7 stainless steel clamping frame is visible. RS236W 900 x 600 1134 x 834 Width K3 37.8 Vandal resistant – Cover is removable only after loosening Visible width is clear opening plus 202mm several screws. (Overall frame is additional 32mm). Watertight – Clamped flooring prevents water from seeping into the structure. Options Versatile – Des igned for flooring thickness from Suffix 2-4mm. H Fitted with Pin Torx screws for security applications. Material – Stainless steel – grade 304 For use in high specification applications including food preparation, prison cells, showers and areas where high corrosion resistance is a requirement. In applications Openings for man entry shall comply with the safety such as swimming pools or having an requirements in force at the place of installation, aggressive atmosphere, grade 316 is generally this is considered to be at least 600 x 600. recommended and is available on request.

Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadeint.co.uk April 2018 11 SF 1 SF 2 11 Gully assemblies for flexible sheet flooring For use 1 50mm socketoutlet and Vandal res floor Installat Outlet washed away i Watert Features GV5007 GV5 ser ‘P’ trappedgully–50mmseal Gully assembliesforflexiblesheetflooring Bucket access from aboveforma Access floors orwhere space by BSEN274forthed 40 l/m Flow rate of 50mmcompl Water seal

Mater good looks matt ﬁn Qual 104 ntercepts jewelleryandother V835N 5 GV5823 V875Sta 5 GV5817 V835N 5 GV5803 V574Sta 4 GV5517 V534N 4 GV5503 V273Sta 3 GV5247 V172Sta 2 GV5107 V132N 2 GV5103 V071Sta 1 GV5007 Code Spec . d Removable Per Apr n Body/d Grat i p tube i i i ckel bronze s removable onlyupondepress i ng mater . ty i i i i l 2018 hrlso 2 pheral slot –50mmsocketforsolvent-weldconnect n al i 50 – sta – –removable buckethelpstoel i ght i i i ; sh (GV5817pol ng/cover/funnel/clamp ble n wetbathrooms andshowerareas deckedw i comfortablyexceedsthem

on –(grat i i –clamp . –formedbyabucketandd p tube/bucket

–removable grat Grat stant – i es i . nless steelorn i Illustrat i al andgullyevenwhenthegrat deally su i i

es w ng

i –GV5007secured grat No ng andfunnelvers Tel Clamp 160 d 220 d i . ng collarprov bucket Removable i i : +44(0)1787 475151 on th plumb i s l i i i scharge from as shed), comb ted for i i i i m ng collar a a i –plast ntenance purposes . . i mater Top ted i . i ckel bronze grat ng/cover/funnel andtrapenableeasy Slottedgrat i i tems wh ng codesofpract . i nstallat i ng collar i i i i i i klboz unl(vl 2Lx8Wx9Hnana3 n/a n/a Funnel(oval)224Lx85W99H ckel bronze klboz Funnel(tapered) 101d ckel bronze klboz Sol ckel bronze klboz Grat ckel bronze c (ABS) des awater-t i i i i i ls te Funnel(parallel)101d nless steel ls te Sol nless steel ls te Secur nless steel ls te Grat nless steel ls te Grat nless steel i i ons) rate i i ng anunobtrus nes durab n i mum rateof24l/m i i i m on i i ch m p tube,thewatersealdepth lVers al i Fax i 56 d ngle showerhead ng hasnov i nate blockagesand i –Sta g3 ng i n t : +44(0)1787 475579 i ght otherw i i i i i a . (Invert) ng/cover/funnel w ng mber orconcrete n excessof i . i l 105 ght sealbetweenthe i i i ty, safetyand on toPVCp i nless steelor ce i s removed i i ve lever n theU i s i i th flex ble fix i se be . i i Secur oe usae)naL51 L15 n/a d cover(unsealed) oe gsee)naL51 L15 n/a d cover(gasketed) i i i i n requ . g(lte)6L51 L15 6 ng (slotted) g(lte)7L51 L15 7 ng (slotted) ng (per i . ty grat . . K i i i pework ble sheetfloor ngs . E-ma i i ty grat i th i hrlso)6K 1 K3 6 pheral slot) i red g(m prue 31 K3 4 ng (4mmaperture) i on i l . : sales@wade i ng ][ H Suffix Opt M P i 3. 2. 1. Notes 0Hnana1 n/a n/a a x101H i

0Hnana2 n/a n/a a x100H

ng suchasv (not GV5007) F *Pin Hex screws ifgrade316speciﬁed. *Pin Hexscrews screws asstandard p vers Tapped toprov as standard) Pol Grade 316grat Maximum continuous operating temperature of75° Maximum continuousoperatingtemperature material are present. material are highamountsofhairand otherwaste very where inapplications cleaningwillbenecessary Frequent the product. accordance withinstructionswhichaccompany The gullymustbesupportedandinstalledin i i tted w i pes –spec ons i i shed –Sta nt i ons only) . co 4 i . . th P uk Sol Max i . i i i Web nyl, ofath oe 5 d cover n Torx* screws forsecur . fy s w .

Note i nless steelonly i i i . dth mm ng/cover/funnel (notGV5007) de ad aperture i : www ze 1¼",1½",or2"(sol GV5247 .

i . rect connect wade i ckness upto3 i nt i . s fittedw co . (GV5817 . uk Load rat i on forwaste ls kg class . Funnel i ty appl i . th P 5mm i d cover i i ng s pol i n Torx . i cat . i shed i ons ...... 7 7 4 2 9 0 0 5 2 Gully assemblies for flexible sheet flooring 11 SF 3 . 2 5 0 0 9 2 4 7 7 ...... ons 5mm i . l 2018 i shed i . n Torx n Torx cat i i Apr ng i s pol i th P d cover i i ty appl Funnel i . class kg on for waste 5 i uk . Load rat ckness up to 3 ckness up i co . (GV6817 nt . i wade . rect connect rect nyl, of a th i i

: www . GV6247 are ﬁtted w GV6247 are ze 1¼", 1½", or 2" (sol i aperture aperture dth mm . i de a d ng/cover/funnel (not GV6007) Web i i nless steel only i Note w d cover

. i fy s . n Torx* screws for secur screws n Torx* i i Max . uk . Sol ng such as v ng such as . th P co i i . 4 nt i ons only) i shed – Sta i ons pes – spec i tted w i i

The gully must be supported and installed in accordance with instructions which accompany the product. Frequent cleaning will be necessary in applications where very high amounts of hair and other waste material are present. Maximum continuous operating temperature of 75° Grade 316 grat Pol as standard) Tapped to prov Tapped vers p screws as standard screws *Pin Hex screws316 speciﬁed. if grade (not GV6007) F

a x 100H n/a n/a 2

i a x 101H n/a n/a 1

i Notes 1. 2. 3. P M Opt Suffix H ][ ng i : sales@wade l ble sheet floor i i on i ng (4mm aperture) 4 K3 1 red red i pheral slot) 6 K3 1 E-ma i th i ty grat i . i th flex i . ngs i K . . ty grat . i ng (per ng (slotted) 7 L15 1 ng (slotted) 6 L15 1 . n requ i i i i d cover (gasketed) n/a L15 1 d cover (unsealed) n/a L15 1 Secur i i . se be i 3 ble fix i s removed s i i n the U ve lever i i ed loose) ng-seal i i ng i ce nless steel or i ty, safety and ty, i i ght seal between l i i n excess of mber or concrete mber or concrete ng/cover/funnel w . i i i : +44(0)1787 475579 ght otherw i n t i ng – Sta Fax i p tube nate blockages and i i ng has no v ngle shower head i i Removable d al Vers p tube, the water seal depth Removable bucket ch m i i on m i i i mum rate of 24 l/m i n nes durab ng an unobtrus i i ons) rate i i nless steel Grat nless steel Grat nless steel Secur nless steel Sol nless steel Funnel (parallel) 101 d i i i i i des a water-t c (ABS) ckel bronze Grat ckel bronze Sol ckel bronze 101 d Funnel (tapered) ckel bronze Funnel (oval) 224L x 85W x 99H n/a n/a 3 i i i i i i ng collar . . i a a nstallat . i i . i . ng codes of pract tems wh i a i a i Slotted grat ng/cover/funnel and trap enable easy i ng collar ckel bronze grat ckel bronze i . i i tchen and shower areas decked w shower areas tchen and ted i 2 Top Top mater i ntenance purposes – plast i 160 d 220 d m 56 d i 110 d ted for shed), comb scharge from a s from scharge th 50mm reducer i i i i s l : +44(0)1787 475151 Clamp i th plumb pework (50mm reducer suppl pework (50mm reducer on ng i i i i ng collar prov Tel got outlet for solvent-weld or r . i i al and gully even when the grat i ng and funnel vers No – GV6007 secured grat – GV6007 secured i

es w

Grat i deally su i Illustrat nless steel or n . i es 50 i – stant – removable grat – removable p tube/bucket – formed by a bucket and d . got outlet w – clamp i i i – (grat on

ng mater

comfortably exceeds the m on to PVC p i n wet bathrooms, k n wet bathrooms, ble i ng/cover/funnel/clamp i sh (GV6817 pol ; i i i ght i – removable bucket helps to el – removable – sta i al n – 110mm sp pheral slot i i i ty . 103 i s removable only upon depress s removable ckel bronze

i i Grat n Body/d Per . GV6007 1 Sta Spec Code GV6103 2 N GV6107 2 Sta GV6247 3 Sta GV6503 4 N GV6517 4 Sta GV6803 5 N GV6817 5 Sta GV6823 5 N ntercepts jewellery and other jewellery and other ntercepts access from above for ma access from Access Bucket floors or where space floors or where Qual matt fin good looks Mater

by BS EN 274 for the d Vandal res Vandal and connect Installat Water seal Water of 50mm compl Flow rate 40 l/m i Features Watert the floor washed away Outlet GV6103 GV6 ser Trapped gully with vertical outlet – 50mm seal 50mm – outlet vertical with gully Trapped Gully assemblies for flexible sheet flooring sheet for flexible assemblies Gully 1 110mm sp 157 For use

Access covers general purpose V 11 ng i l 2018 i Apr nless steel, i th sta i uk . co . nt i

es wade . i

al (19mm recess depth) al (19mm recess i n a wall : www i ckel bronze frame w frame ckel bronze i Web mater Sealed, secured, recessed for ﬂoor recessed Sealed, secured, R5 ser R801 unsealed, secured removable cover for cover removable unsealed, secured use N uk . co . nt i : sales@wade l i . Note access covers of cast iron, nickel bronze A range of Vari-Level Direct connection and stainless steel is shown in Section 5V. versions are shown in Section 6V. ces i E-ma 0 0 5 4 8 8 5 3 ......

d cover i nts at es i i ng i

class kg de access to serv de access i Load rat

: +44(0)1787 475579 Sealed, sol R621 R4 ser Unsealed, secured, removable Unsealed, secured, cal power po i Fax ght mm i Overall al i he an areas, to prov an areas, . i ng mater i n a marble ﬂoor Overall i : +44(0)1787 475151 length mm Tel / . on, Glasgow i a i ted to pedestr i dth mm i w

Overall d

. ons are su ons are

i R621R801 138 205 – 205 48 30 L15 L15 2 4 R412R511R512 229R611 178 229 138 229 178 229 – 25 29 29 48 L15 n/a n/a 2 1 L15 2 2 R411 178 178 23 L15 2 Spec Code R311 186 – 25 L15 2 Sealed, recessed for ﬂoor Sealed, recessed depth) (20mm recess Unsealed, secured, removable Unsealed, secured, Access covers R611 sealed access covers conceal electr R611 Collect the Burrel Vers R311 Nickel bronze – BS BN 1982 BS BN – bronze Nickel Access covers general purpose general covers Access Satin ﬁnish Non-freeze water points WP

. l 2018 i Apr . ns supply i . sm and i on, and are on, and are i t i th wall box) mum) i i uk . co . cle wash down and cle wash down nt ons w i i i zontal pos ng cannot occur ng cannot i i wade

. . ng cover to deter ng cover to ng, veh i i : www nts are non-freeze only when non-freeze nts are n the hor i i . lable on vers i Web – see table onal lock t so that freez i i lst the on/off control mechan control lst the on/off i table for use only at normal ma al uk i i . . nstalled co pressure (up to 10 bar max pressure Cautionary note po Water i su . ng, area clean ng, area Cast gunmetal, copper tube, brass rod, Cast gunmetal, copper tube, brass rod, i

th opt nt (Only ava i i . ron backnut ron nt: i ng, wh i i ld i shes 170 170 i 115 61 50 61 50 al ons i 32 50 i ng cover ls on request i i : sales@wade Water po Water malleable de a bu l i ns out from the un the ns out from i i Opt box mater Wall Sufﬁx ‘L’ Lock Other ﬁn Deta Mater ns th a wall box w th a wall box i i 64 E-ma 110 110 Wall box Wall box ed w

i WADE ng i n n i i on ck tap key i i /2" Brass 1 qu connector nged Operat nged i i cover H H cover sh i 7 /4" BSP

3 connect s turned dra water off, n i i 6 : +44(0)1787 475579 al/ﬁn te epoxy coated i i n i Fax th the valve seal located th the valve i 70 68 . des an externalfor plant water water source . i n n 58 i i . um – wh i n i n i s a UK Water Byelaws Scheme Approved Product Product Byelaws Scheme Approved s a UK Water i nless steel grade 316 – sat nless steel grade 304 – sat i i

prov . thout wall box ckel bronze – sat ckel bronze i i ncrements a i i ncrements 53 nstalled w i box mater Wall i when the valve when the ncrements ; i ckness the product can be suppl product ckness the i 43 D de i n 10mm i n 10mm ckness 70mm m i i : +44(0)1787 475151 ckness 130mm m n 10mm i i 95 x 43 . ckness 130mm m i Tel gned to be gned to be lable i i lable i Wall th lable ven wall th i i Wall th . ava ava 150 x 90 Wall th ckness mm Alum ckness mm N ckness mm Sta ckness mm Gunmetal – sat ckness mm Sta ckness mm W ons are outs ons are i i i i i i i es ava s des i i t i t a g i v i sed access nlet

i i /4" BSP backnut Code 1

. 1

Wade non-freeze water point Wade Wade non-freeze point water Wade lar act i Install with inlet end on the inside of the building, in Regulations, Schedule 2, compliance with Water paragraph 15 (backflow prevention), as applicable to the installation's fluid category (determined by specifier). m /4" BSP i YA101 + wall th + wall YA101 Spec YA211 + wall th YA211 YA212 + wall th YA212 + wall th YA316 YA213 + wall th YA213 YA304 + wall th YA304 3 The product The product hose connect Made to su The unauthor s YA3 YA2 YA1

The Non-freeze water points water Non-freeze Installation notes 1. Flush supply pipework before connecting. 2. Connect, and check for leaks – if leaking, remove centre 3. examine and clean washer and stem assembly, seating, re-assemble and again check for leaks. i Materials care and maintenance – Appendix i de i ll

. i s a i nuous . l 2018 i i ngs by ons . . . . . i i t i ng) Apr . . i ons stance to i i mum al i i es nt to prov i i . ed out to n cast ll gradually i i i ts res es i mum cont i i uk nt w . i . th a max The products The products i co . . . max ; Pa nt . i ty i ndustry, ndustry, l on (surface rust ed to certa al, w i i i i i ng collars, threaded ng collars, threaded ons and threaded ons and threaded ngs i nless steel gull i i i bed below, are are bed below, wade es such as extens i . i sat i . d nage i i s appl i ng temperature of 110°C ng temperature ng temperature of 250°C ng temperature ng temperature of 100°C ng temperature ng temperature of 100°C ng temperature n sta gh grade lacquer pa i i i i i i : www ox . ; ng i stant mater i Web th a h i n the dra i on should be carr i ch does not weaken the mater uk p tubes, extens i . . ng temperature of 75°C ng temperature i i on coat n ‘SuperSeal’ plug assembl i Measures set out below w Measures i co n removable bottle trap n removable th surround . . i i ts extended use under extreme cond ts extended use under extreme nuous operat nuous operat nuous operat nuous operat i i i i i nt i es, d es, membrane clamp s replaceable ve, ﬁre-res i i i ngs ng i i i ts toughness and durab . i -corros i ng nspect i nage i ron – BS EN 1561 ron i z i i ng temperature of 180°C ng temperature on perm i i le c i i ngs are coated w ngs are nuous operat mum cont mum cont mum cont mum cont i cone rubber i i i i i dely used metal i i nc ant tr i : sales@wade l l i i i pework adaptors and accessor pework adaptors od i i i nternal and external surface coverage A z sherard natural process wh natural process wear off and wear off i A w corros Cast cont Max p Max Max Polypropylene trap Used for the removable ABS Used for bod Nylon 6 Used for bottle trap, ﬁlter bucket and ‘SuperSeal’ plug Neoprene Used for gaskets and seals N Used for O-r S Used for O-r Cast Used for bod p A cost-effect Chosen for operat Max . E-ma fe . i n . i ng mpede dra i n i i ng ch ngs es and access covers, descr es and access i ng ce i i i i i

ce l s th i . i i ghly An th most i ll be i . i ons sh i i ch sh and s used i Grat i i n h . c sheet i i cat on coat i i . ned by the i on of the gra i ons ng pads, metal i i on of pass ve atmosphere, ve atmosphere, i n and around n and around i sh, wh shed bronze shed bronze i i pe dry i : +44(0)1787 475579 . nta i ch could i shed floors i rect i th plast cat . i ficant amounts of i i nate surfaces i ng pad (not soap- In appl -corros i Fax i i . ntenance, but per ntenance, but th more than tw th more n fin nless steel i i i i gn ve act i i In unused areas the In unused areas lable on request . i ch blends well w ons se the surface w ll gradually tarn i i i i n the d ng performance and to blend w ng performance tems w n sat i nc ant ng may occur ng s i i i i i i nse and w i ted for fin n i al w ll contam i s ava i shwashers i . i th metal scour i ng an aggress i red for appl red i A z n i sh must not be treated w sh must not be treated i . i ng where exposure to seawater exposure ng where ght abras If left alone pol s generally ma i i ngs, funnels and access covers ng traffic i To restore lustre, apply a pla lustre, restore To . i n d i . n nylon scour i al otherw i i ron i sh n effect wh n effect i sh sh i i i sh of Wade floor gull sh of Wade . i de last table for general use ty of steel, yet w se blacken nclud i i rror fin rror i i i mum of ma i l ckel bronze ckel bronze . i ng i i : +44(0)1787 475151 i . n fin n certa ngs, funnels, access covers, filter buckets ngs, funnels, access covers, filter buckets AISI grade 304 sta z i i i To restore lustre, use metal pol lustre, restore To i n ; . Tel s su i i rror” fin rror” . ng mater sh for grat i on of pass i i ngs ng n on of the gra i sh i i um i . i s a cast alloy, su s a cast alloy, i ned by the sl i The m ch i ng most coastal locat ng pools or hav . i stant metal conta i i i th a fine gra n fin re wool as these w re rect ronments ronments i i es, grat ngs, funnels and access covers i pated i i on, otherw The sat c grade 304 and 316 nta i i i i i . i ron – BS EN 1563 + 1564 – BS EN 1563 ron th the duct ng pad (not soap-filled) ve act mm ch, bronze colour complements the decor, wh colour complements the decor, ch, bronze c i i rcumstances treat w treat rcumstances i i t s recommended and s recommended i i i i . ll gradually tarn i i d cover ve clean i nclud i i i als and fin

n appearance and prolong serv and prolong n appearance on-res i th soap and warm water r le strength of cast le strength i i th sat i i shes le re the m re i i ngs i gher grade may be requ ed by sherard ve env ng w i i th a cloth i i shed gunmetal has a ﬁne gra n the d i i In unused areas the mater In unused areas al w i i i shed to a “m nless steel – i . shed bronze/gunmetal – BS EN 1982 shed bronze/gunmetal nstallat ngs i i i

i i ng rust spots i shed bronze shed bronze i ckel bronze – BS EN 1982 ckel bronze ld i i ll gradually tarn ght abras ckel and chrom i i i s pol s appl

maintenance Materials care and and care Materials corros such as sw grade 316 even h To restore lustre, apply a pla lustre, restore To may be ant traffic any abras permanently scratched Unpol bu generally ma w w buff Note: Avo after where the r where i nylon scour as standard, wh as standard, requ absence of matter wh ensure Sta Austen susta Pol A cast alloy w floor fin sl mater n leav Duct Used only for grat A cast i Pol Used for grat N Used w the tens selected to prov Used for bod Mater and fix A corros filled) Clean w Under no c scrapers or w may also be cleaned a

Glossary – Appendix ii ii ght i . . l 2018 i upper ned, at a . n he i generally ; i ; ble sheet, ne i ve waste i i Apr ons res res i i . ch the nes or n cm2 i i i derat ng pans etc requ i i les, flex ; l i i ght of a GRATING ght of a GRATING ncreased ncreased i i uk lable for DIRECT . i c t s connected to a i i co . ts, bo ch ve waste water i nt ve he i i i i ) that can be dra gn Cons . i ntended to rece i n a GRATING and/or from and/or from n a GRATING s a GRATING or COVER, or s a GRATING . i ons ava i i nyl, or wood etc d wade i i . on un i . t ch i i pes, condensate l s la . i ons are HEIGHT ADJUSTABLE HEIGHT ADJUSTABLE ons are i vers tres/sec i i ; : www . gerat i . d (l i ght of a GRATING or COVER above ght of a GRATING . Web i ng to the mouth, over wh qu i n a GRATING, expressed expressed n a GRATING, shed layer for floors, affixed to the i i i n, terrazzo, v See page 2 Des pework i ncrease the effect ncrease . on at floor level, i uk i i . t floor level ve waste p nks, refr most vers i i i ; co th asphalt, carpet, ceram . i ght fin rectly or by means of a MEMBRANE CLAMPING rectly nt i i i ns APERTURES to rece ns APERTURES ng, the top of wh i i . . ors, res i nstallat i . ther d i ther through APERTURES APERTURES ther through i n a FRAME i ty to adjust the he mum amount of l i ble watert i l i i ght of water above the GRATING, used to determ ght of water above the GRATING, : sales@wade i l scharge fitt scharge i pes connected to the BODY of the gully, may be trapped or pes connected to the BODY of the gully, scharges from s from scharges ven head of water i i i i FLOW RATE the FLANGE to su g capable of water e p non-trapped d HEAD OF WATER He HEIGHT ADJUSTABILITY Fac See GULLY FLOW RATE Max FRAME or COVER wh Support for a GRATING BODY e COLLAR FUNNEL Accessory to rece GRATE See GRATING GRATING fitted at floor level Removable component of a GULLY FREE AREA GRATING of APERTURES Area GULLY D EXTENSION Accessory used to BUCKET FILTER See BUCKET FFL FINISHED FLOOR level FINISHED FLOOR w Floor covered FLANGE Part of the BODY lead DAMP-PROOF MEMBRANE FLEXIBLE SHEET Flex FLANGE by means of a CLAMPING COLLAR and COVERS to su GRATINGS FLOOR DRAIN surface conta fitted CONNECTION to p or COVER above a BODY marble, pav and can be or MULTI-LEVEL) (VARI-LEVEL by means of an EXTENSION E-ma . n a ds, ch i nt i i i de th a i i When . s i ng the i ght jo i ng s . i i . ld ch prevents ch prevents i . i s i ch sturb . i i s dressed on s dressed ntercept sol ntercept i i pework i . : +44(0)1787 475579 shed floor level to . i pework n the floor, on wh n the floor, i ch p Fax i i thout d ng the bu i i ned area . i . on to p ces w i i tem to another i n a GULLY to n a GULLY i d on top of a structural slab . i th i n a channel, or frame, to prov i n a frame at fin ch may be holes or slots i i nto a dra i : +44(0)1787 475151 rect connect rect ons are sealed ons are i i Tel pework or serv nlet and outlet on the same ax i i ngs fitted n such a floor, the membrane n such a floor, i i ng generally la i d cover set i cal i . s generally fitted and to wh nto the mouth of the BODY, and clamped w nto the mouth of the BODY, i i may be trapped or non-trapped most vers n a GRATING wh n a GRATING ; ; i s fitted . nage i i

th vert th factory-ﬁtted components i sh ve cover i i i ke part of a GULLY, ﬁtted below or ke part of a GULLY, i ned to enable d ngs i i s etc on of BODY/GRATING/COVER, outlet of wh on of BODY/GRATING/COVER, i

i near dra i DIRECT CONNECTION Vers DEEP SEAL or more SEAL of 75mm WATER mach Protect COVER See ACCESS COVER DAMP-PROOF MEMBRANE (DPM) See MEMBRANE CLAMPING COLLAR CLEANOUT See ACCESS COVER l CLAMP COLLAR/RING See MEMBRANE CLAMPING COLLAR CLAMPING DEVICE CHANNEL GRATING grat Long, narrow BUCKET fitted w Removable receptacle Body w BODY COLLAR See MEMBRANE CLAMPING COLLAR BODY ASSEMBLY debr TRAP w BODY Bowl-l Non-return valve fitted to a GRATING or BODY wh Non-return fitted to a GRATING valve BELL TRAP BACK INLET See SIDE INLET VALVE BACKWATER Open INLET AUXILIARY See SIDE INLET the flow of foul water back the GRATING ADAPTOR connect one Component used to APERTURES ACCESS COVER Removable, sol

enable access to p connected Glossary ground floor to prevent damp from enter damp from floor to prevent ground floor fin a GULLY a GULLY the FLANGE, MEMBRANE CLAMPING COLLAR to ensure a watert MEMBRANE CLAMPING COLLAR to ensure ii b Glossary – Appendix ii (s used byotherstodenoteGRATING) Meshed accessoryusedto STRAINER Perm SIDE INLET See WATER SEAL SEAL TRAP w ‘S’ TRAP See ACCESSCOVER RODDING EYE/POINT See EXTENSION RAISING PIECE TRAP w ‘Q’ TRAP Gardens, shrubber PLANTING AREAS Part ofprem PLANT ROOM TRAP w ‘P’ TRAP Part ofBODYthrough wh OUTLET Outs O Range ofgull MULTI-LEVEL Mechan M i suppl Used toclampaDAMP-PROOFMEMBRANEBODY MEMBRANE CLAMPINGCOLLAR LOAD RATING class,seepage2fordeta M125 Capab LOAD RATING LOAD RATING class,seepage2fordeta L15 LOAD RATING class,seepage2fordeta K3 d Internal I connect (see page2fordeta below thehor adjusted tosu the hor Glossary s anopt . i D . nks, washbas . D J Apr . . . i de d i i ts theunderfloorconnect ed w i l 2018 i i l zontal i i i i i i ty tow th avert th avert th avert cal jo ng p i on i i ameter ameter i th someser . (SeeSect i ses hous i i . pework i es i zontal i nt t floorlevel,us i thstand loads,expressed . i i . i i i ns etc) . n wh cal cal cal

Tel i es etc i . ls) i i i . : +44(0)1787 475151 nlet andanoffset outletparallelto nlet, andanoutlet nlet, andanOUTLET i i ng mach ch thehe i . on 5CforVar i es aspartoftheBODY, butonothers i nto aGULLY . i , maybelocatedonaroof ch wastewater i ntercept debr i ng a‘pegandcam’pr i i on ofotherﬁxtures nery and/orserv i ght ofaGRATING maybe . i -Level vers . i ncl Fax i i i i ls ls ls i i n classes,orN/mm2 s s d i . . . ncl . i : +44(0)1787 475579 ned at45°below (term i scharged i ned sl i i ons) ces i s somet i . . . nc i ghtly i ple i i nto t ; .

. i mes i t .

E-ma Metr BODY, MEMBRANECLAMPINGCOLLAR,orADAPTOR BSPT connect BSP Four standard typesare used THREAD Range ofqu SUPERSEAL Bowl ofBODY SUMP Grade 316ava Sta STREAMLINE (GRATINGS) (Opt WEEPHOLES the passageoffoula Effect WATER SEAL A formofflex VINYL var Range ofgull VARI-LEVEL Range ofgull UNI-LEVEL Generally, bare concrete UNFINISHED FLOOR See FUNNEL TUNDISH See WATER SEAL TRAP SEAL outlet tothe means ofaWATER SEAL,the passageoffoula Removable or TRAP connect Converts threaded outletBODYtoasp THREADED PIPEWORKADAPTOR GULLY water tobereta GRATINGS allow NPSM THREADED PIPEWORKADAPTORS at FINISHEDFLOORLEVEL at membranelevel or aBODYwh COVERS tosu ADJUSTABLE w i l : sales@wade i i ous GRATINGS andCOVERSwh nless steel(304)reverse wedgeprofile w i (Br onal) holeslocated i c-I i (Br ve he (Nat . i i i . t on toSIDEINLET on top S i i sh Standard P t . i sh Standard P O i i onal P ght ofwater(m i i i ck-release, double-sealedACCESSCOVERS . nt nlet i i i –thread usedforallfix es compr es w ble sheetfloor ; i i i . i ch prov large sumpenablessuddensurges ofwaste ntegral partofaBODYwh t co lable toorder i i . pework us i ned, thereby controll th afinethread toenableaccurate . i . ng easyhe uk i i . pe Stra th non-he i r Web . i de supplementarydra i s i i . pe) –outletthread ofaBODY, i n aMEMBRANECLAMPINGCOLLAR ng var i ; pe, Tapered) –thread onscrew- i : www ght Mechan

i ng apropr i n . i . i i ng ght adjustmentwhen

ght ADJUSTABLE grat . 50mm) i n Wade GULLIES: ; . i requ wade ous BODIESwh i i ; nt i i i ch are HEIGHT ng screws, studsetc ng ﬂowthrough the res GRATINGS and i i etary coupl n atrapwh . i co cal) –thread on i got outletallow . uk i ch prevents, by i i th 5mmslotw nage i r from the i ch accept i i ng ch prevents i nstalled w i i ng nstallat . . i ng ;

i . n . i i dth on i th .

Spec. Code index ndex i CODE s s 2 i i 5 l 2018 i . Apr 4 5 4, 8 1 2 1 2 ...... uk . co . Code Page . nt i SD402-604T1-6 5B ntc T7-9T11, 12T13, 14 10 T15-18 5X 2 10 TP7 5X 2 U1-2 10 U3U4 5X 2 U5, 6, 7 5X 2 U9 8 U11 5X 1 8 U12U13 5X 3 U14 5X 2 U15-16 5X 1 U18 3 5X UP1 5X 3 1 5X UP7UX9 3 5X WB3 2 5X WB5 1 5X WD2-5 5X 1 WD6-7 7 WG3, 5 7 8 YA 8 8 WP Spec N404N405N409N410 6V nb sf P3 6G nb sf P4 6V nb sf P5 6G nb sf P8-10 11M 1 P14 11M 2 Q1, 3-5 11P 11M 1 Q6, 8Q9 11L 1 11S Q10Q10V 11L 2 Q12, 13 11HD 1 13VQ12V, 4B 2 Q14 4B 2 4B 2 4B 2 Q14VQ23Q23V 4B 2 Q24 4B 2 Q24V 4B 1 Q27 4B 1 Q27V 4B 1 Q28 4B 1 Q28V 4B 1 Q42-93 4B 1 QB1-2 4B 1 QG1-2 4B 1 4G R3-6, 8 5B ntss RS2 5B tss SD102-304 11V 5B ntc 11SF 1 wade . : www Web i i uk . 2 1 . . co . nt i Code Page . : sales@wade l i Spec L3001L3091L3101-3102 5G nb 2 L3191-3192 5G ss 2 6G nb 3 L3201-3202 6G ss 2 L3291-3292 5G ss 2 L3301-3302 6G ss 2 L3391-3392 5G ss 2 L3401-3402 6G ss 2 L3491-3492 5G ss 2 L3501-3502 6G ss 2 L3591-3592 5G ss 3 L3601-3602 6G ss 3 L3691-3692 5G ss 2 L3701-3702 6G ss 3 L3791-3792 5G ss 2 L3801-3802 6G ss 3 L3891-3892 5G ss 2 L3901-3902 6G ss 3 L3991-3992 5G ss 2 L5101 6G ss 3 L5103L5191 5V nb L5193 5V nb L5201 6V nb 1 L5291 6V nb 1 L5301 5V nb L5391 6V nb 1 L5305-5308 5G nb 2 L5395-5398 5G ss 2 6G nb 3 L5401 6G ss 3 L5491L5501 5G nb 2 L5507 6G nb 3 L5591 5V nb L5597 5V ss L5601 6V nb 1 L5691 6V ss L5701 5V nb L5791 6V nb 1 L5807 5V c L5897 6V c M1 5V ss M3, 4 6V ss 8 8 N1N211N212N213 nb sf 6G N214 nb sf 6G N215 nb sf 6V N216 nb sf 6G N217 nb sf 6V N218 nb sf 6G N301 6V nb sf N302 6G nb sf N303 6V nb sf N304 6G nb sf N305 nb sf 6V N306 nb sf 6G nb sf 6V 6G nb sf 6V nb sf E-ma i i i i i i : +44(0)1787 475579 Fax Code Page . Spec K3497K3504K3604 6G ss 1 K3594 5G ss 3 K3694 5G ss 3 K5101-5103 6G ss 4 K5107 5V nb 6G ss 4 K5192K5197 5V ss K5201-5203 6V nb sf K5207 5V nb 6V ss K5241K5291-5293 5V ss K5297 6V nb 1 6V nb 1 K5301K5307 6V ss K5391 5V nb K5397 5V ss K5401 6V nb 1 K5491 6V ss K5501 5V nb K5507 6V nb 1 K5591 5V nb K5597 5V ss K5601 6V nb 1 K5607 6V ss K5697 5V nb K5701 5V ss K5791 6V ss K5801 5V nb K5891 6V nb 1 L1941 5V c L2041 6V c L2101-2104 6G nb 3 L2105-2106 5G nb 2 6G nb 3 L2141 5G ss 2 L2191-2194L2196 6G nb 3 6G nb 3 L2201-2202L2241 5G nb 2 6G ss 2 L2291-2292L2301 6G nb 3 6G nb 3 L2391L2402-2409 5G nb 2 L2442-2499 5G nb 2 6G nb 3 L2501 6G nb 4 L2501 CIL2591c 5G nb 2 L2591 CI 5G c L2601 6G nb 3 L2691 6G 6G c L2701 5G c L2791L2801 5G ss 2 L2803 6G ss 3 L2891 5G nb 1 L2893 5G nb 1 L2901-2902 6G nb 2 L2991-2992 5G ss 2 6G nb 2 6G ss bm 2 2 3 3 1 : +44(0)1787 475151 i i i i i i 4 5 3 1 2 2 3 i i i i i i i i i i i Tel 2 3 . .

J2 5C 2 . Code Page

. C - C . K2591 6G c K2591 6G D6-8D10-12 5B ntc 5B ntc G5, 6G10GCGD 5B tc GP 5B tc GV5 5B tc GV6 5B tc H1-2 5B TP J2 11SF 2 K1807 11SF 3 K1897 5B tc K1941 5G ss 1 K2041 5B tc 6G ss 1 K2101-2103 6G nb 1 K2103 CI 5G nb 1 6G nb 1 K2107 5G c K2142K2191-2193 5G ss 1 K2193 CI 6G nb 1 6G nb 1 K2197 6G c K2201K2291 6G ss 1 K2301-2303 5G nb 1 K2307 5G nb 1 6G nb 1 K2392K2397 5G ss 1 K2401 6G nb sf K2407 6G ss 1 K2491 5G nb 1 K2497 5G ss 1 K2501 6G nb 1 6G ss 1 K2601 5G c K2691K2701 5G nb 1 K2791 6G nb 2 K2801 5G nb 1 K2891 6G nb 2 K2901 5G ss 1 K2941-2991 6G ss 1 K3101 6G ss 4 5G ss 3 K3191K32 5G nb 1 K3301-3302 6G nb 1 K3391 5G nb 1 K3401 11o K3402 6G nb 2 K3407 5G nb1 K3491-3492 5G nb 1 6G nb 2 5G ss 1 D2, 4 5B ntc E2, 4F2-3G1-3 8 8 tc 5B C C5 5B ntc C2, 3 5B ntc Spec B5 5B ntc Spec. Code index Code Spec. About Wade Visit our website for online versions of our product catalogue, price list, conditions of sale, news, job opportunities, Wade-CAD, Wade-BIM and PDF format technical handbooks. Wade-CAD is for users who require drawings of Wade products; ﬁles are in both DXF and AutoCAD DWG format. Wade-BIM is our library of BIM 3D models available for a range of products in Revit format. Other Wade literature

Service Technical advice from Wade International Limited, whether verbal, in writing or by way of trials, is given in good faith but Product information and technical advice are available from the without warranty. The application, use and installation of the Wade Technical Services Department at Halstead, Essex, from Company’s products are beyond the control of the Company, Wade Technical Consultants located throughout the UK and and the purchaser is solely responsible for ensuring that goods from selected distributors throughout the world. A computer- are fit for any particular purpose. aided design service is available free of charge for layouts and assemblies of Wade products. In line with the Company’s policy of continual research and development, product specifications and availability are subject Warranty to change or withdrawal without prior notice. The Company warrants its products to be free from defects in Dimensions material and workmanship for a period of 12 months from the date of delivery. In line with general practice all dimensions shown are nominal. The Company’s obligation under this warranty is limited, at its Dimensions are generally given in mm (other units are option, to the repair or replacement, free of charge, or refund specified). of the net invoiced price of any part found to be defective, Quality assurance and which, in the Company’s opinion, has not been subject to undue wear and tear, accident, alteration, abuse or misuse. Certification of compliance with BS EN ISO 9001 underlines Consequential damages are expressly disclaimed. our commitment to quality and service.

QUALITY BY TRADITION PERFORMANCE BY DESIGN

Wade International Ltd. Third Avenue • HALSTEAD Essex • CO9 2SX • UK Telephone: +44(0)1787 475151 • Facsimile: +44(0)1787 475579

e-mail: [email protected] • web site: www.wadeint.co.uk 8355