STOP BEATING YOUR HAMMER UNIONS TO PIECES

Loosening and tightening hammer unions with the typical sledgehammer is incredibly hard on the union – particularly the nut. Repeated hammer strokes wear down the lugs, while missed strokes striking the union’s body can cause hairline cracks which are not noticed until it THROW THE BEST WRENCH AT IT™ splits with the force of pressure.

Replacing various spools equipped with hammer unions is very costly, so this amounts to expensive wear-and-tear. Yet it’s avoidable!

Order a set of HUWE™ wrenches today, and watch your hammer union replacement costs go down. THE REVOLUTIONARY HAMMER UNION WRENCH Versatile, safe, rugged, user-friendly and economical.

THROW THE BEST WRENCH AT IT™

For further information please contact: HUWE™ Head Office 2nd floor – Unit #83 4511 Glenmore Trail SE Calgary, Alberta Canada T2C 2R9 1-855-438-4893 1-855-GET HUWE www.huwewrench.com

© 2013-2014,™, patent-HUWE™ Inc., All rights reserved.

H13-03_Brochure v3.indd 1 14-02-07 2:03 PM DON’T HAMMER IT, HUWE™ IT The international patent-pending HUWE™ is available today. It was MULTIPLE HEAD AND HANDLE SIZES designed in-house by experienced oilfield veterans, thoroughly tested and prototyped, and is manufactured to exacting standards in our HUWE™’s nineteen available head sizes cover many of the The hammer union wrench makes it easy to tighten or own facility in western Canada. Metallic silver is its standard colour. hammer union types commonly used worldwide. Our three loosen unions on flow lines, flare lines, injection lines and handle lengths fit all wrench heads, allowing selection of the high-pressure lines. Equip your crews with HUWE™ on: The HUWE™ makes life easier and safer for today’s generation of handle that best fits the available working space and the user’s • Drilling rigs • Production facilities oilfield workers, without sacrificing speed. You owe it to your crews, strength and preference. You can purchase separate heads and • Service rigs • Cementing your field equipment and your company’s bottom line to grab onto handles or any combination of thereof. • Frac equipment • Coil tubing the HUWE™. • Well testing • Fabrication shops

Versatile, safe, rugged, user-friendly and economical. BENEFITS

User-friendly Much safer

Not just anyone can accurately swing a The HUWE™ offers major benefits: sledgehammer without doing damage. no more fingers and hands struck by But with a simple demonstration, hammers, no more metal chips flying, virtually anyone can instantly use no wrenched backs and joints, and far the HUWE™. less general fatigue – which can breed other mistakes. The HUWE™ is so safe FEATURES Plenty of leverage the user doesn’t require a face shield or Head sizes earplugs. Fewer injuries equal greater The HUWE™’s long handle lets you easily Fig. 1502 Fig. 602 productivity and may ultimately lower apply as much torque as you need. You Head 2” Head 2” insurance premiums. can clearly feel the union seating as the HEAD Head 3” Head 3” Our brilliant head design is key to the O-ring is compressed. This avoids many Economical HUWE™. Cast as one piece of steel – harder unnecessary swings of the hammer. Head 4” Head 4” than hammer union steel – heat-treated Damaged or worn hammer unions and water-tempered, with no welds, the impose recurring costs. Your crews Fig. 1002 Fig. 200/206 rugged HUWE™ head will save the hammer union nut. It fits easily and sits securely on will avert hammer union damage every Head 4” Head 2” the nut, thanks to its long curvature and time they use the HUWE™. That means Head 5" Head 3” open-ended guide, tightening the nut in one ongoing savings. direction while sliding off easily in the other. Head 6” Head 6” Throughout the tool’s lifespan, it will continue to sit evenly and grip properly without slipping. Good for temperatures as low as Fig. 607 Fig. 400 minus 40˚ C. Head 2” Head 3” Head 4” Fig. 300 Head 3” HANDLE The removable, reversible handle gives the HUWE™ its user-friendliness and versatility. Not only does it generate incredible torque Handle sizes but, similar to a box wrench, reversing the Handle 36” handle makes the tool even more versatile in confined spaces. Handle 42” Handle 46”

SAFETY PIN The simple pin is all it takes to lock the handle to the Hardware head. It’s on a chain to Safety Pin complete with chain prevent losing the pin.

H13-03_Brochure v3.indd 2 14-02-07 2:04 PM