DOCSLIB.ORG

SK Hand Tool, LLC Division of IDEAL® Industries, Inc 1-800-822-5575 | Impact Resistant PELICAN™ Case

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
SK Hand Tool, LLC Division of IDEAL® Industries, Inc 1-800-822-5575 | Impact Resistant PELICAN™ Case Outfitted with high quality, mission critical SK® Tools, IDEAL ® Industries products and other heavy duty professional tools. Designed for the professional mechanic who work in demanding environments. Impact resistant PELICAN™ case is proven to function under extreme conditions and designed to survive rough handling and transport in harsh environments. - Drop-proof up to 5 feet - Waterproof up to 1 meter - Adjustable Telescopic handle - Replaceable wheels Removable drawers for maximum tool access and foam inserts to secure tools during travel. Heavy duty wheel construction and wide wheelbase to provide durability and stability. Exterior dimensions: 24”W X 15”D X 18”H SK Part No: GMTK Meets NSN 5180-01-548-7634 Providing Quality Tools and Tool Kits to the United States Government and Military SK Hand Tool, LLC Division of IDEAL® Industries, Inc 1-800-822-5575 | www.sktools.com Impact Resistant PELICAN™ case Pelican™ is a registered trade mark of Pelican Products, Inc. GMTK GENERAL MECHANICS TOOL KIT COMPONENTS TOP AREA DRAWER 4 Tote Bag, Open dimensions: 14””L x 10””W x 11””H, water resistant Combination Wrenches SAE ‑ 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/6, 3/4, 13/16, 7/8, Electrical test, 0‑1000V Digital Multimeter 15/16, and 1”, 12pt Safety glasses, MIL‑PRF‑31013 ballistic protection, clear lens Wrench, Open End Flare Nut ‑ 1/2 X 9/16, 3/8 X 7/16, 5/8 X 11/16, 3/4 x 7/8”, 6 pt Multi‑tool DRAWER 5 Padlock ‑ In acc/w CID A‑A‑59847A Combination Wrenches ‑ 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, DRAWER 1 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 12pt Socket Wrench Locking Extensions ‑ 1/4” square drive, 3.4” and 7.25” lengths Open End Wrenches, 15° head ‑ 1/2 X 9/16, 3/8 X 7/16, 5/8 X 11/16 LED Flex‑Neck Flashlight, coated extention cable with water resistent case Thickness Gage ‑ (32) Blades DRAWER 6 Ratchet ‑ 1/4” drive, Standard (2) Hinged Handle Breaker Bars, 1/2” and 3/8” square drives, 15” length Socket wrench, Screwdriver type, 1/4” square drive Locking Extension, 1/2” drive, 3”, 5”, & 10” length Hex Key Set, Ball End, Sizes: 0.05” to 3/8” Locking Extension, 3/8” drive 3” & 6” length Hex Key Set, Metric, Ball End, Sizes: 1.5mm to 10mm Ratchet‑ 3/8” Drive Inspection Mirror, 17” nominal extended length, 1” X 2” mirror Socket Wrench, Speeder, 1/2” square drive Magnetic Retrieving Tool, Flexible Head Sockets SAE ‑ 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, & 7/8”, 12pt, Machinists Rule, length 6”, 1/10 and 1/100 graduations 3/8” square drive Sockets SAE ‑ 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 12 point, 1/4” square drive Sockets Metric ‑ 10mm & 11mm, 12pt, 3/8” square drive Sockets Metric ‑ 5mm, 6mm, 7mm, 8mm, 10mm, 12 point, 1/4” square drive Clip/Socket Rail Combo, 3/8” drive, 12 sockets Clip/Socket Rail Combo, 1/4” drive Sockets SAE ‑ 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”, 12pt, 3/8” square drive, deep Universal joint‑ 1/4” square drive Clip/Socket Rail Combo, 3/8” drive, 6 sockets Socket Wrench Adapter, 1/4” drive to 3/8” socket Hex Bit Sockets, 1/2 & 9/16” hex sizes, 1/2” square drive Tamper‑resistant Torx Plus® Bit, T15 & T25, 1/4” square drive Hex Bit Sockets, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8” hex sizes, 3/8” square drive Wrench, box, half moon, 7/16 X 1/2 & 9/16 X 5/8 Tamper‑resistant TORX PLUS® Bit, T40, 3/8” square drive Spanner wrench, 3/4 to 2” capacity Clip/Socket Rail Combo, 3/8” drive, 7 sockets Sash Brush, Round or Oval, 1‑1/4” thick, 2‑1/4” length Universal joint, 3/8 & 1/2” square drive Offset Ratcheting Screwdriver, #2 crosstip, 1/4” flat tip DRAWER 7 Tape Measure,12 ft./3.5 meters Machinist’s Ball Peen Hammer, 16 oz. head DRAWER 2 Ratchet, 1/2” square drive Rolling‑Head Pry Bar,16” Screwdrivers: Cold Hand Chisel, 3/4” cut Flat Tip: 5/16” x 6”L, 1/4” x 4”L, 3/8” x 8”L Hand File, 8” Round, 10” Flat, 8” Three Square Stubby 1/4” x 1‑1/2”L File Set, 12 pc., Swiss Pattern Needle, #0 Cut Cabinet Style: 1/8” x 3”L, 1/8” x 5”L and 3/16” x 6”L Aligning Punch 3/16” tip diameter, 10” nominal length Cross Tip: #1 x 3”L, #2 x 4”L and #3 x 6”L (3) Drive Pin Punches 5”, 6”, 7” nominal lenghts: 1/8”, 1/4”, and 5/16” tip diameters Sockets SAE ‑ 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1‑1/16, 1‑3/16, 1‑1/4, Center Punch 5” nominal length, 3/8” body 12pt, 1/2” square drive Long pin punch, 3/8” tip diameter, 8” nominal length Clip/Socket Rail Combo, 1/2” drive, 15 sockets Brass punch, 3/4” nominal diameter, 8” nominal length Sockets Metric ‑12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, (2) Brass Drift Punches: 1/4” diameter & 5” nominal length, 1/2” diameter & 7” nominal length 22mm, 24mm, 12pt, 1/2” square drive Putty Knife, 1‑1/2” stiff blade Clip/Socket Rail Combo, 1/2” drive, 11 sockets Hand Saw, Jab Socket Metric ‑ 10mm, 12pt, 1/2” square drive, deep Ratcheting Screwdriver with bits ‑ 3/16” & 9/32” flat tip, #1 & #2 Phillips, DRAWER 3 and T10 & T15 Torx® Diagonal Cutter Pliers, 7” nominal length Long Nose Pliers, 8” nominal length, wire cutters Tongue and Groove Pliers, 10” nominal length GMTK General Mechanics Tool Kit Slip Joint Pliers, 6’’ nominal length IDEAL Industries, SK Part No.GMTK (2) Locking Pliers, 10” and 6” Long Nose Cage Code: 30119 Electrical Connector Pliers 9 “ nominal length Wrench, adjustable, 12”, 1‑1/2” jaw opening IDEAL Industries, Inc. Customer Service: Wrench, adjustable, 6”, 15/16” jaw opening 1375 Park Ave Phone: 800-822-5575 Sycamore, IL. 60178 Fax: 800-752-2434 Torx Plus® is a registered trademark of Acument Intellectual Properties, LLC Printed in the USA ©2018 SK Hand Tool, LLC All Rights Reserved. Label Revision 8/16/2018 L-1052.
Load more

Recommended publications
  • 60" Workbench
    Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 69054 60" Workbench Visit our website at: http://www.harborfreight.com Email our technical support at: [email protected] When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible. Copyright© 2012 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product. any shape or form without the express written consent of Harbor Freight Tools. Failure to do so can result in serious injury. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL. improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Table of Contents Safety ......................................................... 2 Parts List and Diagram .............................. 10 Specifications ............................................. 3 Warranty .................................................... 12 Setup .......................................................... 3 SA F ET Y WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
    [Show full text]
  • Punches, Drill Bits and Tool Sets
    Punches, Drill Bits and Tool Sets GENERAL PURPOSE DRILL BITS AND DRILL BIT SETS ELECTRONIC CONNECTOR PANEL PUNCHES Drill Bit Features: Drill Bit Set Features: • Sizes for PC board applications • High speed steel • High speed steel • Industrial quality Features: • Straight shank • Black ferous oxide finish cases A Straight shanks (except for 5876-34156 which has 3/8" reduced shanks) • Drill only one 7/16" pilot hole • Use wrench or hydraulic drive methods • C • Capacity 22-16 gauge mild steel • Universal size for front or back mount of connectors Drill Bits • 5 piece assembly: Punch, die, draw stud, square nut, B and ball bearing drive nut (in a plastic carrying case) For quantities greater than listed, call for quote. MOUSER Drill Size Price Each STOCK NO. Drill No. Hole Size (in.) Length (in.) 1 10 20 50 For quantities greater than listed, call for quote. 5876-409-52 52 .0635 1 7/8 1.10 1.04 .99 .97 MOUSER No. of Dimensions: in. Price 5876-409-55 55 .0520 1 7/8 1.56 1.49 1.41 1.34 STOCK NO. Pins A B C Each 5876-409-60 60 .0400 1 5/8 1.45 1.38 1.31 1.24 586-0229 9 .787 .982 .469 527.87 5876-409-66 66 .0330 1 3/8 2.96 2.70 2.50 2.35 586-0231 15 1.127 1.309 .469 517.51 5876-409-69 69 .0292 1 3/8 3.21 3.05 2.90 2.75 586-0232 25 1.655 1.853 .469 520.07 5876-409-80 80 .0135 3/4 2.52 2.39 2.27 2.22 586-0234 37 2.296 2.497 .469 550.44 586-0238 50 2.201 2.402 .579 555.86 Drill Bit Sets For quantities greater than listed, call for quote.
    [Show full text]
  • Master Tool Catalog
    ® • DROP CEILING INSTALLATION • MASTER TOOL CATALOG quality brands of Q.E.P. Co., Inc., founded in 1979, is a world class, worldwide provider of innovative, quality and value-driven flooring and industrial solutions. As a leading worldwide manufacturer, marketer and distributor, QEP delivers a comprehensive line of hardwood and engineered wood flooring, flooring installation tools, adhesives and flooring related products targeted for the PROFESSIONAL INSTALLER as well as the DO-IT-YOURSELFER. In addition the company provides industrial tools with cutting edge technology to all of the industrial trades. The Company continues to build its reputation for offering its customers the most comprehensive flooring installation product line and wood flooring available from one company. The company markets over 7,000 products under various brand names that are well respected in their market niches. Brand names include QEP®, ROBERTS®, Capitol®, Harris Wood®, Faus Floors®, Homelux®, TileRite®, Nupla®, HISCO®, Ludell®, Vitrex®, Plasplugs®, PRCI®, Porta-Nails®, Tomecanic®, Bénètiere® and Elastiment®. Strategically located around the world, QEP currently has distribution and manufacturing capabilities located throughout the United States, Canada, Australia, New Zealand, United Kingdom, France and China. QEP continually enhances its market leadership positions through selective acquisitions that extend its geographic reach, add proprietary product lines and broaden distribution capabilities, enabling the Company to capitalize on cross-selling opportunities.
    [Show full text]
  • Service Parts List 54-44-2600 Specify Catalog No
    BULLETIN NO. SERVICE PARTS LIST 54-44-2600 SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS REVISED BULLETIN DATE M18™ Metal Cutting Shear with 18 Ga. Double Cut Head Sept. 2014 WIRING INSTRUCTION STARTING CATALOG NO. 2635-20 SERIAL NO. F86A SEE PAGE THREE EXAMPLE: 00 0 Component Parts (Small #) Are Included When Ordering The Assembly (Large #). 11b 8 9 10 1111a 11b 21 17 16 7c 7a 7b 13 7 7c 7b 12 7a 10(8x) 6a 11a 8(3x) 15 5(2x) 4 = 8 (3x) =10(8x) 3 6b 6a 6b 2 6 7b 6c Tighten screws in the order shown to 45-50 in-lbs. 9 1k 1a 1 1b 3 1d 2 FIG. PART NO. DESCRIPTION OF PART NO. REQ. 1e 1 48-08-0500 Shear Head Assy. (Includes 1a thru 1k) 1 1a 45-88-7310 Washer 1 1b 43-16-0100 Eccentric Assembly 1 1a 1b 1c 1d 1e 1c 43-84-0460 Knurled Insert 3 1 1f 1g 1h 1j 1k 1h 1d 43-76-0400 Shear Housing 1 1c 1f 1e 06-75-2115 10-24 x 1-1/4" Skt. Hd. Cap Screw 3 NOTE: See 1f 48-44-0160 Blade - Left Side 1 page two of 1g 42-40-0520 Bushing 2 this bulletin for 1h 48-44-0150 Blade - Center 1 service details 1g 1j 48-44-0170 Blade - Right Side 1 relating to the Shear Head 1k 49-96-0070 5/32" Hex Allen Wrench 1 Assembly, No. 48-08-0500 2 34-60-0905 'C' Retaining Ring 1 3 28-84-0130 Rotational Collar 1 1j 4 31-52-0070 Rotational Head Release Lever 1 5 40-50-1085 Spring 2 FIG.
    [Show full text]
  • 05/29/18 Tools & Home Improvement Auction
    09/27/21 12:18:09 05/29/18 Tools & Home Improvement Auction Auction Opens: Wed, May 23 3:30pm PT Auction Closes: Tue, May 29 5:30pm PT Lot Title Lot Title 0001 Husky 25 Gallon Mobile Toolbox 0029 Wiss Multi-Purpose Wire Cutters Model 0002 Husky 37" 50 Gallon Mobile Toolbox PWC9W 0003 2-Pack Window Insulation Shrink Kit 0030 Wiss Spring Assisted Folding Pocket Knife 0004 2-Pack Window Insulation Shrink Kit 0031 Wiss Quick Change Folding Utility Knife 0005 Frost King 9-Pack Window Insulation Shrink 0032 Wiss Auto Retracting Safety Utility Knife Kit 0033 Crescent Permabond 20oz. Rip Claw Hammer 0006 Bosch Self Leveling 30 ft Cross Line Laser 0034 Crescent 8" Pass Through Adjustable Wrench 0007 (2) Lengths of Frost King Door & Weather Seal Set 0008 (2) Lengths of Frost King Weather Stripping 0035 Crescent 7pc. SAE+MM Combo Nut Driver Socket Set 0009 (2) 10 ft Rubber Foam Self Stick Weather Seal 0036 Husky 6pc. Diamond Tip Magnetic Screwdriver 0010 Zircon HD25 Stud Sensor Set 0011 Zircon HD70 Stud Sensor 0037 Husky Gravity Feed HVLP Spray Gun 0012 Stanley Dual Melt Glue Gun GR25 0038 Husky High-Low Torque 1/2" Impact Wrench 0013 Stanley 10" Medium Duty Riveter Model MR33 0039 Husky Digital Sliding T-Bevel 0014 Ryobi Smart Works Moisture Meter for 0040 Husky 46pc. Stubby Wrench & Socket Set Smartphone 0041 Husky 23pc. Precision Screwdriver Set 0015 Stanley Powerlock 16 ft & Fatmax 25 ft Tape Measures 0042 Husky 2pc. Quad Drive Ratcheting Wrench Set 0016 (2) Stanley Utility Knives w/10 Spare Blades 0043 Husky 2" O.D.
    [Show full text]
  • Operator's Manual
    OPERATOR’S MANUAL 10 in. Compound Miter Saw TS1345L - Double Insulated 31.6 22.5 22.5 31.6 Your miter saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS Introduction ..................................................................................................................................................................... 2 Warranty .......................................................................................................................................................................... 2 General Safety Rules ....................................................................................................................................................3-4 Specific Safety Rules ....................................................................................................................................................4-5 Symbols ........................................................................................................................................................................... 6 Electrical .........................................................................................................................................................................
    [Show full text]
  • Punching Tools Truservices Punching Tools Truservices
    TruServices Punching Tools TruServices Punching Tools TruServices Expertise for every application Machine Tools / Power Tools Laser Technology / Electronics Medical Technology The perfect tooling structure. + = Alignment ring Punch Stripper + + = Die plate Die adapter Die Alignment ring The alignment ring is available in three different versions. Punch Punches are available in three different sizes (size 0, 1, and 2). Punch chuck The punch chuck is available in two different sizes and is used with size 0 punches. It has the same clamping diameter as all other punches. Stripper The outside diameter of the stripper is 100 mm. Die Dies are available in two different sizes (size 1 and 2). Size 1 can be used in the same way as size 2 with the help of a die adapter. Tool cartridge Both die sizes are used with the same tool cartridge and the same die plate. A die adapter is used for holding size 1 dies. 2 E-mail: [email protected] / Fax: 860-255-6433 Content General information Preface Expertise for every application TRUMPF quality – Made in USA General information General ... and much more from page 4 Punching Classic System Special shapes MultiTool Guided tools ... and much more from page 8 Cutting Slitting tool MultiShear Film slitting tool ... and much more from page 30 Forming Countersink tool Extrusion tool Tapping tool Emboss tool ... and much more from page 40 Marking Center punch tool Engraving tool Marking tool Embossing tools ... and much more from page 66 Accessories Tooling accessories Tool cartridges Setup and grinding tools Consumables and additional equipment ... and much more from page 78 Useful information Dimensions + regrinding Stripper selection Tool life Low-scratch/scratch-free processing ..
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • How to Use Tools / Mistakes to Avoid CARLTSOE SAFETY TOOLS
    CARLTSOE SAFETY TOOLS If you just had the right tools How to Use Tools / Mistakes to Avoid Tool Proper Uses Abuse/Misuse Nail Hammers Nail hammers are intended for driving and pulling common, Never strike one hanmmer with or against another hammer unhardened nails only, and for ripping apart wooden or a hatchet. Never strike nail pullers, steel chisels or structures. They may be used to strike nail sets with the other hardened objects with a nail hammer as the face may center of the striking face. chip, possibly resulting in eye or other serious injury. Ball Pein Hammers Ball pein hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and Strike squarely and avoid glancing blows that may cause straightening unhardened metal. the edge of the face to chip, possibly resulting in eye or When striking a struck tool (chisel or punch), the striking face other serious injury. Never strike with or against the side, of the hammer should have a diameter at least 3/8" larger or cheek, of any hammer. than the struck face of the tool. Riveting and Setting Hammers The Riveting hammer is designed for driving and spreading Never use these special-purpose hammers for general- rivets on sheet metal work. The Setting hammer is designed purpose work. The square, sharp edges of the setting for forming sharp corners, closing and peining seams and lock hammer make it vulnerable to chipping if improperly used. edges, and for use by glaziers for inserting glazier points. Never strike against other steel tools.
    [Show full text]
  • STEEL WORKBENCH 1650Mm
    INSTRUCTIONS FOR: STEEL WORKBENCH 1650mm MODEL No: AP165WB Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. Refer to instruction manual 1. SAFETY 1.1 GENERAL SAFETY WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this workbench. WARNING! Use caution when handling and assembling the metal components. The metal may have sharp edges or corners, the use of protective gloves is recommended. Locate workbench in a suitable working area. Keep the work area clean, uncluttered and ensure there is adequate lighting. Keep the workbench clean and tidy in accordance with good workshop practice. Keep children and unauthorised persons away from the working area. DO NOT climb, step or stand on the workbench. DO NOT use the workbench for any purpose other than that for which it is designed. DO NOT use in damp work areas. WARNING! The warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.
    [Show full text]
  • TOP SAW Pocket Wrench • 57-020
    TOP SAW Pocket Wrench • 57-020 Handle for Chain Saw File 13 mm Socket Small Screwdriver Bar Groove Clean Out Tool Large Screwdriver T27 Driver 4 mm Allen Wrench 10 mm and 19 mm Socket The Ultimate Chain Saw Tool Recommended uses: FEATURES BENEFITS Consumer 4.5" Long • Comes with a sturdy carrying case that attaches to your belt for quick access no matter where you are Commercial 9 Tools in One • Makes it easy to work on most chain saws in the eld Large Screwdriver Professional • For bar adjustments T27 Driver • For bolts on Stihl®, and many other chain saws Small Screwdriver • For fuel and bar oil adjustments 4 mm Allen Wrench • For work on Echo®, Husqvarna®, Poulan® and other saws 13 mm (1/2") Socket Wrench • Handles bar nuts on half or full wrap handles on Husqvarna® saws 19 mm Socket Wrench • Reversible to a 10 mm to work on spark plugs on all saws and bar nuts on Stihl® saws Bar Groove Clean Out Tool • Removes debris from your bar’s groove in just a few seconds Handle for Chain Saw File • Set of holes to accommodate chain saw les OREGON® • Blount Inc. • oregonchain.com TOP SAW Pocket Wrench • 57-020 OREGON® TOP SAW POCKET WRENCH Large screwdriver for bar adjustment and access to Husqvarna® interior T27 Driver for adjusting all bolts on Stihl® chain saws 10, 13 and 19 mm sockets for bar nuts and spark plugs A. 4 mm Allen wrench A B C for Echo® and Husqvarna® saws B. Small screwdriver for bar and oil adjustments C.
    [Show full text]
  • Instruction Sheet KOR-520, KOR-14 Knockout Hand Ratchet
    Instruction KOR-520, KOR-14 Sheet Knockout Hand Ratchet IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect Shipping damage is NOT covered by warranty. The carrier is all components for shipping damage. If any shipping damage is responsible for all repair or replacement costs resulting from found, notify carrier at once. damage in shipment. IMPORTANT—USER SAFETY AND PROTECTION: In setting up systems to fit your operations, care must be taken to select the proper components and design to insure appropriate integration with your operations and existing equipment and that all safety measures have been taken to avoid the risk of personal injury and property damage from your application or system. GB ELECTRICAL CANNOT BE RESPONSIBLE FOR DAMAGE OR INJURY CAUSED BY UNSAFE USE, MAINTENANCE OR APPLICATION OF ITS PRODUCTS. Please contact GB ELECTRICAL for guidance when you are in doubt as to the proper safe- ty precautions to be taken in designing and setting up your particular application. To protect your warranty use only GB/Enerpac hydraulic oil. TO PREVENT INJURY, KEEP HANDS AWAY FROM PUNCHES, DIES AND KNOCKOUT CUTTING TOOLS. TO AVOID EQUIPMENT DAMAGE AND PERSONAL INJURY, DO NOT USE THE KNOCKOUT CUTTING TOOL ON GLASS, PLASTIC OR WOOD. THESE MATERIALS COULD SHATTER AND PRODUCT SPINTERS WHICH COULD CAUSE INJURIES. • KEEP THREADS CLEAN AND WELL OILED! Properly maintained tools are safer to use, and they work better. Model KOR-520 and KOR-14 are designed for use on 10 gauge mild steel. Also for stainless steel up to 12 gauge. • ENGAGE THREADS FULLY! Adapter screw should be firmly seated in driver screw before beginning the punching operation.
    [Show full text]