DOCSLIB.ORG

Chop/Circular/Band Saws D28715 14" Chop Saw W/Quick-Change Blade System That Allows the Saw's Head to Be Locked in the Carrying Position Without the Use of a Chain

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Chop/Circular/Band Saws D28715 14 THE POWER TOOLS Product Line Chop/Circular/Band Saws D28715 14" Chop Saw w/Quick-Change Blade System that allows the saw's head to be locked in the carrying position without the use of a chain. Its heavy-duty compression spring provides smooth move- DEWALT's 14-inch heavy-duty chop saw cuts everything from ment and greater durability than torsion springs. With a cutting capacity (5” metal drywall studs to angle iron, ensuring the best overall round, 4-1/2” by 6-1/2” rectangle) you can cut a wide variety of materials. performance available. This unit features a powerful 5-1/2 SPECIFICATIONS INCLUDES HP, 15 Amp AC/DC motor. • Amps 15.0 Amps • 14" abrasive wheel Other special features include a Quick-Change blade • No Load Speed 4,000 rpm • Blade change wrench change system that increases productivity by • Spindle Lock Yes • Blade bolt giving you the ability to change wheels without a • Quick Lock Vise Yes • Blade washer • Wheel Arbor 1” wrench; a quick-release fence that requires no • Wheel Diameter 14" wrenches to adjust; patented Quick-Fence™ tool- • Max Capacity (Round) 5" free, 45-degree adjustable fence that allows for fast and accurate angle cuts; • Max Capacity (Rectang.) 4-1/2" x 6-1/2" and an ergonomically designed "D" handle that provides a more comfortable • Tool Length 21" hand position and reduces user fatigue. It also has a heavy-duty lock-down pin • Tool Weight 39.0 lbs D28700 14" Chop Saw SPECIFICATIONS INCLUDES • Amps 15.0 Amps • 14" abrasive wheel The DEWALT 15 Amp 14” Chop Saw features a powerful 4 HP • No Load Speed 3,800 rpm • Blade change wrench motor with overload protection. The chop saw boasts a 45° • Spindle Lock Yes pivoting fence for angle cuts, an ergonomically designed • Quick Lock Vise Yes horizontal "D" handle, a heavy-duty lock down pin, and an • Wheel Arbor 1” • Wheel Diameter 14" adjustable spark guard that lets you direct sparks away from • Max Capacity (Round) 4-1/2" the work area. It also features an on-board wheel change • Max Capacity (Rectang.) 4-3/4" x 5-1/3" wrench and a compression spring for smooth • Tool Length 21" movement and increased durability. Other features • Tool Weight 35.0 lbs include a steel base and a Quick-Lock vise that permits • Horsepower 4.0 HP fast clamping on different sizes of materials. A compression spring provides smoother movement and increased durability versus standard torsion springs. DW872 14" Heavy Duty Multi-Cutter Saw SPECIFICATIONS INCLUDES • Amps 15.0 AC/DCAmps • 14" carbide tipped blade The DW872 14" Multi-Cutter saw with a 15 AMP motor has • No Load Speed 1,300 rpm • Blade change wrench enough capacity to cut everything from 5-inch black pipe • Spindle Lock Yes • Vertical clamp0 to 2-9/16-inch solid bar stock. It's also great for cutting • Quick Lock Vise Yes • Wheel Arbor 1” threaded rod, struts, angle iron, black pipe, and rebar. The • Wheel Diameter 14" carbide-tipped blade averages more than 1,200 cuts in most • Max Capacity (Round) 5-3/16" applications, and by sharpening, you can get up to 5,000 • Max Capacity (Rectang.) 6-1/2" x 4-1/2" cuts. Most local blade shops will retarget the blade. • Tool Length 21" The DW872 sports a powerful 5.3-horsepower • Tool Weight 47.0 lbs motor and is designed to stand up to rugged • Horsepower 4.0 HP work on a regular basis. Your purchase includes a quick-locking vise and tool-free miter adjustment for additional speed and convenience. D28770 capacity. Dual bearing blade guide rollers fortify the blade support system for Deep Cut Variable Speed Band Saw thicker cuts. And, this versatile workhorse is equipped with an adjustable material The band saw is one of the most reached for tools guide for quick and easy cutting of odd-size stock. Variable speeds make it easy on any jobsite, so DEWALT packed this deep cut, to match the tool speed to any job. A large front handle offers more hand space, portable workhorse for power, accuracy, and versa- and control, and an ergonomic, soft-grip, back handle means more comfort. tility. A burly, 6 amp motor is designed to withstand SPECIFICATIONS INCLUDES heavy-duty cutting applications. Protective rubber • Amps 6.0 Amps • Standard bumpers keep the tool safe on the toughest jobsite. A lightweight • Ft./Min. 80-280 fpm 44-7/8"x1/2"x.020" blade and well-balanced design means easy handling. An innovative sight-light illumi- • Max Capacity (Round) 4-3/4" • hex wrench nates the cut line in any jobsite environment. And, an integrated hang hook • Max Capacity (Rectang.) 4-3/4" makes it easy to hang the saw without damaging the front handle or castings. • Tool Length 21 " It's easy to cut through round or rectangular stock thanks to this saw's 4-3/4” cut • Tool Weight 15.0 lbs 4302 Glenwood Rd. Brooklyn, NY 11210 800 456-2658 Fax: 888 434-3215 718 434-4500 Fax: 718 434-3215 www.tannerbolt.com 127.
Load more

Recommended publications
  • 60" Workbench
    Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 69054 60" Workbench Visit our website at: http://www.harborfreight.com Email our technical support at: [email protected] When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible. Copyright© 2012 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product. any shape or form without the express written consent of Harbor Freight Tools. Failure to do so can result in serious injury. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL. improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Table of Contents Safety ......................................................... 2 Parts List and Diagram .............................. 10 Specifications ............................................. 3 Warranty .................................................... 12 Setup .......................................................... 3 SA F ET Y WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
    [Show full text]
  • Punches, Drill Bits and Tool Sets
    Punches, Drill Bits and Tool Sets GENERAL PURPOSE DRILL BITS AND DRILL BIT SETS ELECTRONIC CONNECTOR PANEL PUNCHES Drill Bit Features: Drill Bit Set Features: • Sizes for PC board applications • High speed steel • High speed steel • Industrial quality Features: • Straight shank • Black ferous oxide finish cases A Straight shanks (except for 5876-34156 which has 3/8" reduced shanks) • Drill only one 7/16" pilot hole • Use wrench or hydraulic drive methods • C • Capacity 22-16 gauge mild steel • Universal size for front or back mount of connectors Drill Bits • 5 piece assembly: Punch, die, draw stud, square nut, B and ball bearing drive nut (in a plastic carrying case) For quantities greater than listed, call for quote. MOUSER Drill Size Price Each STOCK NO. Drill No. Hole Size (in.) Length (in.) 1 10 20 50 For quantities greater than listed, call for quote. 5876-409-52 52 .0635 1 7/8 1.10 1.04 .99 .97 MOUSER No. of Dimensions: in. Price 5876-409-55 55 .0520 1 7/8 1.56 1.49 1.41 1.34 STOCK NO. Pins A B C Each 5876-409-60 60 .0400 1 5/8 1.45 1.38 1.31 1.24 586-0229 9 .787 .982 .469 527.87 5876-409-66 66 .0330 1 3/8 2.96 2.70 2.50 2.35 586-0231 15 1.127 1.309 .469 517.51 5876-409-69 69 .0292 1 3/8 3.21 3.05 2.90 2.75 586-0232 25 1.655 1.853 .469 520.07 5876-409-80 80 .0135 3/4 2.52 2.39 2.27 2.22 586-0234 37 2.296 2.497 .469 550.44 586-0238 50 2.201 2.402 .579 555.86 Drill Bit Sets For quantities greater than listed, call for quote.
    [Show full text]
  • Service Parts List 54-44-2600 Specify Catalog No
    BULLETIN NO. SERVICE PARTS LIST 54-44-2600 SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS REVISED BULLETIN DATE M18™ Metal Cutting Shear with 18 Ga. Double Cut Head Sept. 2014 WIRING INSTRUCTION STARTING CATALOG NO. 2635-20 SERIAL NO. F86A SEE PAGE THREE EXAMPLE: 00 0 Component Parts (Small #) Are Included When Ordering The Assembly (Large #). 11b 8 9 10 1111a 11b 21 17 16 7c 7a 7b 13 7 7c 7b 12 7a 10(8x) 6a 11a 8(3x) 15 5(2x) 4 = 8 (3x) =10(8x) 3 6b 6a 6b 2 6 7b 6c Tighten screws in the order shown to 45-50 in-lbs. 9 1k 1a 1 1b 3 1d 2 FIG. PART NO. DESCRIPTION OF PART NO. REQ. 1e 1 48-08-0500 Shear Head Assy. (Includes 1a thru 1k) 1 1a 45-88-7310 Washer 1 1b 43-16-0100 Eccentric Assembly 1 1a 1b 1c 1d 1e 1c 43-84-0460 Knurled Insert 3 1 1f 1g 1h 1j 1k 1h 1d 43-76-0400 Shear Housing 1 1c 1f 1e 06-75-2115 10-24 x 1-1/4" Skt. Hd. Cap Screw 3 NOTE: See 1f 48-44-0160 Blade - Left Side 1 page two of 1g 42-40-0520 Bushing 2 this bulletin for 1h 48-44-0150 Blade - Center 1 service details 1g 1j 48-44-0170 Blade - Right Side 1 relating to the Shear Head 1k 49-96-0070 5/32" Hex Allen Wrench 1 Assembly, No. 48-08-0500 2 34-60-0905 'C' Retaining Ring 1 3 28-84-0130 Rotational Collar 1 1j 4 31-52-0070 Rotational Head Release Lever 1 5 40-50-1085 Spring 2 FIG.
    [Show full text]
  • Operator's Manual
    OPERATOR’S MANUAL 10 in. Compound Miter Saw TS1345L - Double Insulated 31.6 22.5 22.5 31.6 Your miter saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS Introduction ..................................................................................................................................................................... 2 Warranty .......................................................................................................................................................................... 2 General Safety Rules ....................................................................................................................................................3-4 Specific Safety Rules ....................................................................................................................................................4-5 Symbols ........................................................................................................................................................................... 6 Electrical .........................................................................................................................................................................
    [Show full text]
  • Punching Tools Truservices Punching Tools Truservices
    TruServices Punching Tools TruServices Punching Tools TruServices Expertise for every application Machine Tools / Power Tools Laser Technology / Electronics Medical Technology The perfect tooling structure. + = Alignment ring Punch Stripper + + = Die plate Die adapter Die Alignment ring The alignment ring is available in three different versions. Punch Punches are available in three different sizes (size 0, 1, and 2). Punch chuck The punch chuck is available in two different sizes and is used with size 0 punches. It has the same clamping diameter as all other punches. Stripper The outside diameter of the stripper is 100 mm. Die Dies are available in two different sizes (size 1 and 2). Size 1 can be used in the same way as size 2 with the help of a die adapter. Tool cartridge Both die sizes are used with the same tool cartridge and the same die plate. A die adapter is used for holding size 1 dies. 2 E-mail: [email protected] / Fax: 860-255-6433 Content General information Preface Expertise for every application TRUMPF quality – Made in USA General information General ... and much more from page 4 Punching Classic System Special shapes MultiTool Guided tools ... and much more from page 8 Cutting Slitting tool MultiShear Film slitting tool ... and much more from page 30 Forming Countersink tool Extrusion tool Tapping tool Emboss tool ... and much more from page 40 Marking Center punch tool Engraving tool Marking tool Embossing tools ... and much more from page 66 Accessories Tooling accessories Tool cartridges Setup and grinding tools Consumables and additional equipment ... and much more from page 78 Useful information Dimensions + regrinding Stripper selection Tool life Low-scratch/scratch-free processing ..
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • How to Use Tools / Mistakes to Avoid CARLTSOE SAFETY TOOLS
    CARLTSOE SAFETY TOOLS If you just had the right tools How to Use Tools / Mistakes to Avoid Tool Proper Uses Abuse/Misuse Nail Hammers Nail hammers are intended for driving and pulling common, Never strike one hanmmer with or against another hammer unhardened nails only, and for ripping apart wooden or a hatchet. Never strike nail pullers, steel chisels or structures. They may be used to strike nail sets with the other hardened objects with a nail hammer as the face may center of the striking face. chip, possibly resulting in eye or other serious injury. Ball Pein Hammers Ball pein hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and Strike squarely and avoid glancing blows that may cause straightening unhardened metal. the edge of the face to chip, possibly resulting in eye or When striking a struck tool (chisel or punch), the striking face other serious injury. Never strike with or against the side, of the hammer should have a diameter at least 3/8" larger or cheek, of any hammer. than the struck face of the tool. Riveting and Setting Hammers The Riveting hammer is designed for driving and spreading Never use these special-purpose hammers for general- rivets on sheet metal work. The Setting hammer is designed purpose work. The square, sharp edges of the setting for forming sharp corners, closing and peining seams and lock hammer make it vulnerable to chipping if improperly used. edges, and for use by glaziers for inserting glazier points. Never strike against other steel tools.
    [Show full text]
  • TOP SAW Pocket Wrench • 57-020
    TOP SAW Pocket Wrench • 57-020 Handle for Chain Saw File 13 mm Socket Small Screwdriver Bar Groove Clean Out Tool Large Screwdriver T27 Driver 4 mm Allen Wrench 10 mm and 19 mm Socket The Ultimate Chain Saw Tool Recommended uses: FEATURES BENEFITS Consumer 4.5" Long • Comes with a sturdy carrying case that attaches to your belt for quick access no matter where you are Commercial 9 Tools in One • Makes it easy to work on most chain saws in the eld Large Screwdriver Professional • For bar adjustments T27 Driver • For bolts on Stihl®, and many other chain saws Small Screwdriver • For fuel and bar oil adjustments 4 mm Allen Wrench • For work on Echo®, Husqvarna®, Poulan® and other saws 13 mm (1/2") Socket Wrench • Handles bar nuts on half or full wrap handles on Husqvarna® saws 19 mm Socket Wrench • Reversible to a 10 mm to work on spark plugs on all saws and bar nuts on Stihl® saws Bar Groove Clean Out Tool • Removes debris from your bar’s groove in just a few seconds Handle for Chain Saw File • Set of holes to accommodate chain saw les OREGON® • Blount Inc. • oregonchain.com TOP SAW Pocket Wrench • 57-020 OREGON® TOP SAW POCKET WRENCH Large screwdriver for bar adjustment and access to Husqvarna® interior T27 Driver for adjusting all bolts on Stihl® chain saws 10, 13 and 19 mm sockets for bar nuts and spark plugs A. 4 mm Allen wrench A B C for Echo® and Husqvarna® saws B. Small screwdriver for bar and oil adjustments C.
    [Show full text]
  • Instruction Sheet KOR-520, KOR-14 Knockout Hand Ratchet
    Instruction KOR-520, KOR-14 Sheet Knockout Hand Ratchet IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect Shipping damage is NOT covered by warranty. The carrier is all components for shipping damage. If any shipping damage is responsible for all repair or replacement costs resulting from found, notify carrier at once. damage in shipment. IMPORTANT—USER SAFETY AND PROTECTION: In setting up systems to fit your operations, care must be taken to select the proper components and design to insure appropriate integration with your operations and existing equipment and that all safety measures have been taken to avoid the risk of personal injury and property damage from your application or system. GB ELECTRICAL CANNOT BE RESPONSIBLE FOR DAMAGE OR INJURY CAUSED BY UNSAFE USE, MAINTENANCE OR APPLICATION OF ITS PRODUCTS. Please contact GB ELECTRICAL for guidance when you are in doubt as to the proper safe- ty precautions to be taken in designing and setting up your particular application. To protect your warranty use only GB/Enerpac hydraulic oil. TO PREVENT INJURY, KEEP HANDS AWAY FROM PUNCHES, DIES AND KNOCKOUT CUTTING TOOLS. TO AVOID EQUIPMENT DAMAGE AND PERSONAL INJURY, DO NOT USE THE KNOCKOUT CUTTING TOOL ON GLASS, PLASTIC OR WOOD. THESE MATERIALS COULD SHATTER AND PRODUCT SPINTERS WHICH COULD CAUSE INJURIES. • KEEP THREADS CLEAN AND WELL OILED! Properly maintained tools are safer to use, and they work better. Model KOR-520 and KOR-14 are designed for use on 10 gauge mild steel. Also for stainless steel up to 12 gauge. • ENGAGE THREADS FULLY! Adapter screw should be firmly seated in driver screw before beginning the punching operation.
    [Show full text]
  • SL-IV 50 PLUS Manual
    STREAMLINE HIGH-PRESSURE WATERJET PUMP OPERATION and SERVICE MANUAL STREAMLINE SL-IV 50 STREAMLINE SL-IV 50 400 V / 3 / 50 Hz Manual No. 05146311 Rev. 3 Original: July 2003 CPN-Nr.: 80800-GB-08 NOTICE This document contains subject matter in which KMT Waterjet Systems Company has proprietary rights. Recipients of this document shall not duplicate, use, or disclose information contained herein, in whole or in part, for other than the purpose for which this manual was provided. KMT Waterjet Systems believes the information described in this manual to be accurate and reliable. Much care has been taken in its preparation, however, the Company cannot accept any responsibility, financial or otherwise, for any consequences arising out of the use of this material. The information contained herein is subject to change, and revisions may be issued to advise of such changes and/or additions. KMT Waterjet Systems 2004 KMT Waterjet Systems Wasserstrahl-Schneidetechnik GmbH Auf der Laukert 11 D – 61231 Bad Nauheim, Germany Tel. +49 (0) 60 32 – 997 0 Fax: +49 (0) 60 32 – 997 270 E-Mail: [email protected] 01/2004 01/2004 SECTION 0 TABLE OF CONTENTS TABLE OF CONTENTS 1 INTRODUCTION (1) 1-1 1.1 Description 1-1 1.1.1 Features 1-3 1.2 Functional Description 1-3 1.2.1 Functional Features 1-3 1.3 Worldwide Product Support 1-5 1.3.1 GOLD- und SILVER-Service - Cost-Calculation Security 1-5 1.3.2 Service Department 1-5 1.3.3 Parts Support 1-6 1.3.4 Questionnaire 1-6 1.4 Safety 1-9 1.4.1 Labels and Abbreviations 1-9 1.4.2 Safety Procedures 1-11 1.4.3 High-Pressure
    [Show full text]
  • PUNCHES and CHISELS Punches and Chisels the Anvil End on Heads of Snap-On® Punches and Chisels Are Machined to a Modified Parabolic Curve
    PUNCHES AND CHISELS Punches and Chisels The anvil end on heads of Snap-on® punches and chisels are machined to a modified parabolic curve. This design directs the striking force to the center of the tool head to allow slow metal displacement. The parabolic curve controls mushrooming to reduce chipping and splitting. Heads should be re-dressed to their original shape with hand files as necessary. The tough steel alloy is machined and differentially heat treated for optimum performance. The hardness of the striking head is reduced to help toughness and add qualities that result in a slower mushrooming of the striking surface. PPC250BK Punch and Chisel Set. PPC100AK Punch and Chisel Set. ncludes 24 pcs. in KB2179 kit bag: Includes 10 pcs. in KB2175 kit bag: PPC1A PPC106A PPC205A PPC820B PPC812B PPC828B PPC15B PPC3A PPC108A PPC206A PPC824B PPC816B PPC12B PPC19B PPC250BK PPC4A PPC110A PPC208A PPC12B PPC820B PPC13B PPC103A PPC112 PPC210A PPC14B PPC824B PPC14B PPC104A PPC203A PPC812B PPC15B PPC100AK PPC105A PPC204A PPC816B PPC19B PPCD70BK Punch and Chisel Set. PPC210BK Punch and Chisel Set. Includes 7 pcs. in KB2183 kit bag: Includes 22 pcs. in KB2178 kit bag: PPC103A PPC106A PPC110A PPC1A PPC105A PPC204A PPC816B PPC104A PPC107A PPC5A PPC106A PPC205A PPC820B PPC105A PPC108A PPC3A PPC108A PPC206A PPC824B PPC210BK PPC4A PPC110A PPC208A PPC828B PPC103A PPC112 PPC210A PPCD70BK PPC104A PPC203A PPC812B PPCS60BK Punch and Chisel Set. Includes 6 pcs. in KB2185 kit bag: PPC715BK Punch and Chisel Set. PPC203A PPC205A PPC208A Includes 16 pcs. in KB2182 kit bag: PPC204A PPC206A PPC210A PPC1A PPC104A PPC203A PPC208A PPC3A PPC105A PPC204A PPC812B PPC4A PPC106A PPC205A PPC816B PPC715BK PPC103A PPC108A PPC206A PPC820B PPCS60BK PPC50AK Punch and Chisel Set.
    [Show full text]
  • Accuvalve On/Off Valve A2 Cutting Head Dialine Cutting Head
    AccuValve On/Off Valve A2 Cutting Head DiaLine Cutting Head Instruction Manual 810700 | Revision 0 | English AccuValve On/Off Valve, A2 Cutting Head, and DiaLine Cutting Head Instruction manual Revision 0 November 2013 Original instructions Hypertherm Waterjet 309 5th Ave NW New Brighton, MN 55112 +1 866-566- 7099 +1 651-294-8620 fax ⓒ 11/2013 Hypertherm Inc. All rights reserved. No part of this document might be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or any form by any means without the written permission of Hypertherm Inc. 2 Warranty Failure to follow and apply these instructions is considered to be misuse. Personal injury, product damage, or failure caused by misuse are not covered by the Hypertherm Inc. warranty. Hypertherm, Inc. warrants that its Products shall be free from defects in materials and workmanship, if Hypertherm is notified of a defect (i) with respect to the intensifier pumps within a period of two (2) years from the date of its delivery to you, and (ii) with respect to the cutting head assemblies within a period of one (1) year from its date of delivery to you, with the exception of Diamond orifices, which shall be within a period of six hundred (600) hours of use. General This warranty shall not apply to any Product which has been incorrectly installed, modified, or otherwise damaged. Hypertherm, at its sole option, shall repair, replace, or adjust, free of charge, any defective Products covered by this warranty which shall be returned with Hypertherm’s prior authorization (which shall not be unreasonably withheld), properly packed, to a Hypertherm facility, or to an authorized Hypertherm repair facility, all costs, insurance and freight prepaid.
    [Show full text]