AM / FM Radio Clock + Projection + USB Charger THE BEST CHOICE FOR BEDROOM

Scan to watch video guide

Speak with our experts 1-800-303-6081 Mon - Sun 6am to 12am PST 6pm to 12pm PST [email protected]

User Manual Version 3.0 Website: www.mesqool.com Preface Contents Thank you for choosing our CR1001 AM / FM Projection Alarm Clock Radio. Chapter 1 LOCATION OF CONTROLS 01

For your convenience, we have created a simplified users manual, hoping Chapter 2 POWERING ON & TIME SETTING 03 that it will be easy enough for all to understand and follow. Please keep this manual for your references. Chapter 3 PROJECTION MODE 04 Chapter 4 HIGH-LOW DIMMER/DST SWITCH 06

Chapter 5 ALARM SETTING 07

Statements Chapter 6 SNOOZE SETTING 10

We do not offer any guarantees for this product, if misused or used in any Chapter 7 SLEEP TIMER SETTING 11 other manner not stipulated in our user’s manual. This product was tested Chapter 8 AM/FM RADIO SETTING 12 and working properly when it was shipped to us. This Item will not be replaced or warrantied if misused or abused in any other manner then what Chapter 9 RADIO CHANNEL STORAGE AND PRESETTING 13 is stipulated in the user’s guide. Chapter 10 USB CHARGING 14 We reserve the right to change and or modify our user’s manual at any time. For your convenience, we suggest that you regularly visit our website to Chapter 11 RECOVERY 15 obtain the latest information concerning this product. Chapter 12 SPECIFICATIONS & CAUTION 16 Chapter 1 LOCATION OF CONTROLS 9. PROJECTION MODE 10. DST INDICATOR 1 2 3 4 11. ALARM 1 BUZZER INDICATOR 5 22 6 7 12. ALARM 1 RADIO INDICATOR 8 9 10 13. AM/FM INDICATOR 16 11 14. ALARM 2 BUZZER INDICATOR 12 15. ALARM 2 RADIO INDICATOR 13 16. FOCUS RING 14 17. BATTERY DOOR 15 18. DC JACK 19. SPEAKER 20. FM ANTENNA 21. USB PORT 22. PM INDICATOR 23. HOLDER ( x 2pcs)

19

23

17 21 18 20

1. TIME SET/PROGRAM 2. HOUR/TUNING- 3. MINUTE/TUNING+ 4. HIGH-LOW DIMMER/DST Switch 5. SLEEP/SNOOZE 6. ALARM 1/VOLUME- 7. ALARM 2/VOLUME+ 8. RADIO button (Press and hold for at least 2 seconds to return to CLOCK mode)

- 01 - - 02 - Chapter 2 POWERING ON & TIME SETTING Chapter 3 PROJECTION MODE

Initialize Setting 1. Press Projection mode to turn on the projection.

1. Connect 2pcs 1.5V “AA” size batteries to the proper terminals in the 2. Press once again to flip the projection time reversely. battery compartment.(bettery is not included)

2. Connect the adapter line to DC jack , then plug into a 100~240V AC wall 3. Press once again to turn off the projection. power outlet. Turn OFF

3. Hold press to maintain flash on the display.

4. Press to set the hour.

5. Press to set the minute.

6. Press once to confirm or wait for 5 seconds.

To change current time

1. Check whether AM/FM radio is closed, if not,hold press to turn AM/FM Note: 1. Best projection distance is between 1.5 to 3.0 meters.

off until radio indicator AM/FM is off. 2. Projector is a common LED light. So the projector is not visible in 2. Hold press to maintain display flash. daytime.

3. Repeat the above step .

- 03 - - 04 - 4. Rotate focus ring to adjust clarity of projection image. Chapter 4 HIGH-LOW DIMMER/DST SWITCH 1.HIGH-LOW DIMMER Repeatedly press to switch the display brightness from High Medium Low.

2. DST SWITCH 1. Hold press to light up the DST indicator .

2. An hour will be added to the current time on the display.

3. To turn off DST, Hold press until the DST Indicator turns off. NOTE. Depending on your location and whether or not DST (Day Saving Time) is available. Note: if projection numbers are fuzzy,please rotate the focus ring (16) to adjust proper angle for clear projection clock.

- 05 - - 06 - Chapter 5 ALARM SETTING Set alarm wake to AM/FM radio

Indicator means wake to buzzer. 1. Repeat until the indicator light up, display start flashing.

Indicator means wake to radio 2. Repeat and to set alarm time.

Both indicators are off means alarms are inactive. 3. Press to adjust alarm volume, Display show . Note. AM or FM radio should be closed to set alarm time. This product features convenient dual alarms. Each alarm function can be 4. Repeat or to set your desired radio alarm volume. set independently, with a choice of Wake To Radio or Wake To Buzzer. Set alarm wake to buzzer Press to save your setting radio alarm volume. 1. Press once to light up buzzer indicator.

5. Repeat to turn on FM radio or AM radio. Display start flashing. AM/FM

6. Repeat or to tune into your desired radio channel. 2. Repeat or to set alarm time.

7. Hold press to turn off radio channel setting. 3. Press or wait for 5 seconds to confirm alarm setting. AM/FM

Setting Alarm2 wake to radio is as same as above. Setting Alarm2 wake to buzzer is as same as above.

- 07 - - 08 - Turn off Alarm Chapter 6 SNOOZE SETTING When alarm sounds, you can either do: When alarm1 or alarm2 sounds, Press to temporarily turn off 1. Press to temporarily turn off alarm for 9 minutes. alarm for 9 minutes. Alarm will ring every next 9 minutes. Once SNOOZE function is activated, the corresponding alarm indicator will flash.

2. Press to turn off alarm for 24 hours. Press once to turn off SNOOZE, alarm indicator AM/FM AM/FM The alarm indicator is still on, which means alarm is still activated and will stops flashing. ring after 24 hours.

3. To completely turn off alarm, Press or until all indicators

disappear from the display.

- 09 - - 10 - Chapter 7 SLEEP TIMER SETTING Chapter 8 AM/FM RADIO SETTING The SLEEP timer function allows the radio to play in blocks of 10, 20, 30, 40, 1. Repeat press until display show FM or AM frequency, 50, 60, 70, 80, or 90 minutes before turning off automatically, so you can AM/FM enjoy falling asleep when listening to the radio. such as .

2. Manual Tuning Radio Channel 1. Repeat press turn on the FM or AM radio. AM/FM Repeat or to tune into the desired radio channel.

2. Press once ,display show Each press ,FM frequency will tune up by 0.1MHZ.

Each press ,FM frequency will tune down by 0.1MHZ. 3. Repeat to select your desired sleep time.

Sleep time show on the display in sequence as 90 > 80 > 70 >60 > 50 > 40 Auto Scanning Radio Channel >30 > 20 > 10 > OFF Hold press or for more than 2 seconds to start auto 4. Wait for 2 seconds, display will return to time. scanning.

Scanning will stop automatically once received a available radio channel.

3. Adjust Radio Volume.

Repeat to increase the volume.

Repeat to decrease the volume.

4.Turn off radio.

Hold press to turn off radio,display return back to time. AM/FM

AM frequency: 520kHz ~ 1710kHz, 520kHz preset as a default. FM frequency: 87.5 MHZ ~ 108MHz, 87.5MHz preset as a default.

- 11 - - 12 - Chapter 9 RADIO CHANNEL STORAGE AND PRESETTING Chapter 10 USB CHARGING Store your desired radio channel 1. Plug clock into outlet and connect with AC power. 2. Connect the charging cable with the device and this clock. 1. Tune into your desired FM or AM radio channel.

E 1 E 2 89% 22:23 2. Hold press until the display shows .

3. Press or to select sequence of channel storage.

F01, F02, F03, F04, F05, F06, F07, F08, F09 and F10.

4.Press to save presetting channel . NOTE: charging cable is not included.

Tuning into your saved radio channel

1. Repeat to turn on AM or FM radio. AM/FM

2. Repeat to choose your presetting radio channel,such as F01.

3. Wait for 5 seconds to confirm your presetting radio channel. Display will

return to the current time.

- 13 - - 14 - Chapter 11 RECOVERY Chapter 12 SPECIFICATIONS & CAUTION When something wrong happens to this product such as display show Power Source : AC/DC Adapter-Auto Voltage 100V~240V, 50/60Hz unnormal numbers,key dysfunction or no effect.please unplug the DC Radio Frequency: FM 87.5 ~ 108 MHZ AM520 ~ 1710KHZ adapter and take the 1.5V “AAA” size batteries out, then the product can be Power Consumption: 7.5 W restored. Speaker: 8Ω / 1W USB Output: 5V 1.5A DC battery: 3V (1.5V “AAA” size x 2pcs. For clock memory. Not included)

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN

The lightning flash CAUTION: TO REDUCE THE RISK The exclamation point and arrowhead within OF ELECTRIC SHOCK, DO NOT within the triangle is a the triangle is a REMOVE COVER(ON BACK).NO warning sign alerting warning sign alerting USER-SERVICEABLE PARTS you of important you of “dangerous INSIDE,PEFER SERVICING TO instructions voltage” inside the QUALIFIED SERVICE accornpanying the product. PERSONNEL. product.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION : THE CLOCK RADIO MUST NOT BE USED IN ANY ENVIRONMENT WHERE IT MAY BE SUBJECT TO THE DRIPPING OR SPLASHING OF WATER OR OTHER LIQUIDS. DO NOT CONNECT THE ANTENNA WIRE ON THE BACK OF THIS SET TO ANY OUTDOOR ANTENNA. The main plug is used as the disconnect device, the disconnect device shall remain readily operable. It should not be obstructed during intended use. To disconnect the apparatus from power, the mains plug of the apparatus must be disconnected from the mains socket outlet completely.

BACK OF SET : Battery compartment for 3 volt (1.5V “AAA” size x 2pcs.) battery (not included) for temporary time storage.

Electrical products should not be disposed of with household waste. Thank you to recycle collection points provided for this purpose. Consult with your local authorities or dealer for advice on recycling.

- 15 - - 16 -