ISO Update Supplement to ISOfocus
June 2019
International Standards in process
ISO/CD 23134 Roasted ground coffee — Method using test sieves An International Standard is the result of an agreement between ISO/DTS Molecular biomarker analysis — Detection the member bodies of ISO. A first important step towards an Interna- 20224-2 of animal derived materials in foodstuffs and tional Standard takes the form of a committee draft (CD) - this is cir- feedstuffs by real-time PCR — Part 2: Ovine culated for study within an ISO technical committee. When consensus DNA Detection Method has been reached within the technical committee, the document is ISO/DTS Molecular biomarker analysis — Detection sent to the Central Secretariat for processing as a draft International 20224-3 of animal derived materials in foodstuffs and Standard (DIS). The DIS requires approval by at least 75 % of the feedstuffs by real-time PCR — Part 3: Porcine member bodies casting a vote. A confirmation vote is subsequently DNA detection method carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. ISO/DTS Molecular biomarker analysis — Detection 20224-4 of animal derived materials in foodstuffs and feedstuffs by real-time PCR — Part 4: Chicken DNA detection method ISO/DTS Molecular biomarker analysis — Detection 20224-5 of animal derived materials in foodstuffs and feedstuffs by real-time PCR — Part 5: Goat DNA detection method ISO/DTS Molecular biomarker analysis — Detection CD registered 20224-6 of animal derived materials in foodstuffs and feedstuffs by real-time PCR — Part 6: Horse DNA detection method Period from 01 May to 31 May 2019 ISO/DTS Molecular biomarker analysis — Detection 20224-7 of animal derived materials in foodstuffs and These documents are currently under consideration in the technical feedstuffs by real-time PCR — Part 7: Donkey committee. DNA detection method They have been registred at the Central Secretariat. TC 45 Rubber and rubber products ISO/CD 3949 Plastics hoses and hose assemblies — Textile- TC 6 Paper, board and pulps reinforced types for hydraulic applications ISO/CD 638-1 Paper, board and pulps — Dry Matter content — Specification — Part 1: Materials in solid form ISO/CD 23384 Rubber and plastics hoses and hose as- TC 8 Ships and marine technology semblies, wire or textile reinforced types with working pressure equal or above 70 MPa (700 ISO/CD 15364 Ships and marine technology — Pressure/ bar — Specification vacuum valves for cargo tanks and devices to ISO/CD 4658 Acrylonitrile-butadiene rubber (NBR) — Evalu- prevent the passage of flame into cargo tanks ation procedure TC 10 Technical product documentation ISO/CD 3011 Rubber- or plastics-coated fabrics — Determi- ISO/CD 7083 Technical drawings — Symbols for geometrical nation of resistance to ozone cracking under tolerancing — Proportions and dimensions static conditions TC 17 Steel ISO/CD 3934 Rubber, vulcanized and thermoplastic — Pre- formed gaskets used in buildings — Classifica- ISO/CD 683-3 Heat-treatable steels, alloy steels and free- tion, specifications and test methods cutting steels — Part 3: Case-hardening steels ISO/CD 4674-2 Rubber- or plastics-coated fabrics — Deter- ISO/CD Steel — Measurement method for the evalu- mination of tear resistance — Part 2: Ballistic 16573-2 ation of hydrogen embrittlement resistance of pendulum method high strength steels — Part 2: Slow stain rate test for hydrogen energy applications ISO/CD 5470-2 Rubber- or plastics-coated fabrics — De- termination of abrasion resistance — Part 2: TC 20 Aircraft and space vehicles Martindale abrader ISO/CD 7961 Aerospace — Bolts — Test methods ISO/CD 6450 Rubber- or plastics-coated fabrics — Determi- ISO/CD 23989 Space environment (natural and artificial) — nation of resistance to liquids Operational control of the solar wind energy ISO/CD 6452 Rubber- or plastics-coated fabrics — Determi- input into the Earth's magnetosphere by means nation of fogging characteristics of trim materi- of the ground-based PC index als in the interior of automobiles TC 22 Road vehicles ISO/CD Elastomeric seismic-protection isolators ― Part ISO/CD 11565 Road vehicles — Spark plugs — Test methods 22762-5 5: Sliding seismic-protection isolators for build- and requirements ings — Part 5: Titre manque TC 34 Food products ISO/CD 22941 Rubber sheets for livestock — Specification ISO/CD 23443 Infant formula and adult nutritionals — Deter- ISO/CD 23641 Flexible cellular polymeric materials ― Determi- mination of lutein, beta-carotene and lycopene nation of antibacterial effectiveness by reversed phase ultra high performance TC 46 Information and documentation liquid chromatography ISO/CD TR Principles of identification ISO/CD 23418 Microbiology of the Food Chain — Genomic 22943 sequencing of foodborne microorganisms — General requirements and guidance for bacte- rial genomes
ISO Update, Supplement to ISO Focus -- June 2019 1 ISO/CD 23404 Information and documentation — Papers and ISO/CD Mechanical vibration — Laboratory method boards used for the conservation — Measure- 10326-2 for evaluating vehicle seat vibration — Part 2: ment of the impact of conservation materials Application to railway vehicles on paper cellulose ISO Mechanical vibration and shock — Hand-arm TC 48 Laboratory equipment 10819:2013/ vibration — Measurement and evaluation of the CD Amd 2 vibration transmissibility of gloves at the palm ISO/CD 8655-1 Piston-operated volumetric apparatus — Part of the hand — Amendment 2 1: Terminology, general requirements and user recommendations ISO 13091- Mechanical vibration — Vibrotactile perception 1:2001/CD thresholds for the assessment of nerve dys- ISO/CD 8655-2 Piston-operated volumetric apparatus — Part Amd 2 function — Part 1: Methods of measurement at 2: Pipettes the fingertips — Amendment 2 ISO/CD 8655-3 Piston-operated volumetric apparatus — Part ISO/CD Mechanical vibration — Vibrotactile perception 3: Burettes 13091-2 thresholds for the assessment of nerve dys- ISO/CD 8655-4 Piston-operated volumetric apparatus — Part function — Part 2: Analysis and interpretation 4: Dilutors of measurements at the fingertips ISO/CD 8655-5 Piston-operated volumetric apparatus — Part ISO/DTR Mechanical vibration and shock — Coupling 5: Dispensers 15230-2 forces at the man--machine interface for hand- ISO/CD 8655-6 Piston-operated volumetric apparatus — Part transmitted vibration — Part 2: Guidelines for 6: Gravimetric reference measurement proce- the evaluation of coupling forces dure for the determination of volume TC 113 Hydrometry ISO/CD 8655-7 Piston-operated volumetric apparatus — Part ISO/CD 772 Hydrometry — Vocabulary and symbols 7: Alternative test methods for the for the ISO/CD 748 Hydrometry-Measurement of liquid flow in determination of volume open channels using velocity measurement ISO/CD 8655-9 Piston-operated volumetric apparatus — Part devices 9: Manually operated precision laboratory syringes TC 117 Fans TC 61 Plastics ISO/CD 13348 Industrial fans — Tolerances, methods of con- version and technical data presentation ISO/CD Plastics — Differential scanning calorimetry 11357-8 (DSC) — Part 8: Determination of thermal TC 121 Anaesthetic and respiratory equipment conductivity ISO/CD Non-invasive sphygmomanometers — Part 3: ISO/CD Plastics — Temperature modulated DSC — 81060-3 Clinical investigation of continuous automated 19935-3 Part 3: Separation of overlapping thermal measurement type transitions ISO/DTS Non-invasive sphygmomanometers — Part 5: ISO/CD 23976 Plastics — Fast differential scanning calorim- 81060-5 Requirement for the repeatability and repro- etry — Chip calorimetry ducibility of NIBP simulators for testing TC 68 Financial services ISO/CD 24015 Medical suction equipment — Part 4: General requirements ISO/CD 11568 Financial services — Key management (retail) — Principles, symmetric ciphers and asym- TC 127 Earth-moving machinery metric cryptosystems, their key management ISO/DTR Earth-moving machinery — Operator's manual and life cycle 6750-2 — Part 2: List of references TC 83 Sports and other recreational facilities TC 138 Plastics pipes, fittings and valves for and equipment the transport of fluids ISO/CD 7331 Ski-poles for alpine skiing — Requirements ISO/CD Plastics piping systems for industrial applica- and test methods 22101-1 tions — Glass fibre reinforced polyethylene TC 85 Nuclear energy, nuclear technologies, (PE-GF) — Part 1: General and radiological protection ISO/CD Plastics piping systems for industrial applica- 22101-2 tions — Glass fibre reinforced polyethylene ISO/CD Nuclear energy, nuclear technologies, and (PE-GF) — Part 2: Pipes 12749-6 radiological protection — Vocabulary — Part 6: Nuclear medicine ISO/DTS Assessment of conformity of plastics piping 23818-1 systems for the rehabilitation of existing pipe- ISO/DTS Nuclear sector — Requirements for bodies lines — Part 1: Polyethylene (PE) material 23406 providing audit and certification of Quality management systems for organizations supply- TC 146 Air quality ing products and services important to nuclear ISO/CD 8518 Workplace air — Determination of particulate safety (ITNS) lead and lead compounds — Flame or elec- TC 92 Fire safety trothermal atomic absorption spectrometric method ISO/DTS FTIR analysis of fire effluents in cone calorim- 21397 eter tests ISO/CD ISO 16000-6 "Indoor air — Part 6: Determina- 16000-6 tion of volatile organic compounds in indoor ISO/DTR Fire resistance — Tests for thermo-physical and test chamber air by active sampling, ther- 15655 and mechanical properties of structural materi- mal desorption and gas chromatography using als at elevated temperatures for fire engineer- MS or MS-FID" ing design TC 147 Water quality ISO/CD 21524 Product standard fire resistance — Active fire curtain barrier ISO/CD 6107 Water quality — Vocabulary TC 106 Dentistry ISO/CD 23695 Water quality — Determination of ammonium nitrogen in water — Method using cuvette tests ISO/CD 23445 Dentistry — Tissue punches ISO/CD 23696 Water quality — Determination of nitrates in TC 108 Mechanical vibration, shock and condi- water — Method using cuvette tests tion monitoring
2 ISO Update, Supplement to ISO Focus -- June 2019 ISO/CD 23697 Water quality — Determination of total nitrogen ISO/IEC CD Information technology — Smart City ICT refer- in water — Method using cuvette tests 30145-2 ence framework — Part 2: Smart city knowl- edge management framework TC 150 Implants for surgery ISO/IEC CD Telecommunications and information exchange ISO/CD 27186 Active implantable medical devices — Four- 21558-1 between systems — Future network architec- pole connector system for implantable cardiac ture — Part 1: Reference model of recursive rhythm management devices - Dimensional inter-network architecture and test requirements ISO/IEC CD Telecommunications and information exchange TC 156 Corrosion of metals and alloys 21558-2 between systems — Future network architec- ISO/CD 8407 Corrosion of metals and alloys — Removal ture — Part 2: Switching and Routing of corrosion products from corrosion test ISO/IEC CD Telecommunications and information exchange specimens 21558-3 between systems — Future network architec- TC 163 Thermal performance and energy use ture — Part 3: Proxy model based quality of in the built environment service ISO/CD 21239 Thermal insulation products for building - Re- ISO/IEC CD Telecommunications and information exchange flective insulating products - Specification and 21558-4 between systems — Future network architec- testing ture — Part 4: Networking of everything TC 172 Optics and photonics ISO/IEC CD Telecommunications and information exchange 21559-1 between systems — Future network protocols ISO/CD 13142 Optics and photonics — Lasers and laser- and mechanisms — Part 1: Recursive inter- related equipment - Cavity ring-down method network architecture error and flow control for high-reflectance and transmittance protocol measurements ISO/IEC CD Telecommunications and information exchange ISO/CD 19986 Lasers and laser-related equipment — Test 21559-2 between systems — Future network protocols method for angle resolved scattering and mechanisms — Part 2: Recursive inter- TC 173 Assistive products network architecture flow allocator ISO/CD 10535 Hoists for the transfer of disabled persons — ISO/IEC CD Telecommunications and information exchange Requirements and test methods 21559-3 between systems — Future network proto- cols and mechanisms — Part 3: Recursive ISO/CD 21856 Assistive products for persons with disability — inter-network architecture common application General requirements and test methods connection establishment ISO/CD 22711 Automatic Urine Disposal Systems ISO/IEC CD Telecommunications and information exchange — Vocabulary 21559-4 between systems — Future network proto- ISO/CD 22748 Absorbent incontinence aids for urine and/or cols and mechanisms — Part 4: Recursive faeces — Terminology and classification inter-network architecture common distributed application TC 190 Soil quality ISO/IEC CD Telecommunications and information exchange ISO/CD 12404 Soil quality — Guidance on the selection and 21559-5 between systems — Future network protocols application of screening methods and mechanisms — Part 5: Switching and TC 204 Intelligent transport systems routing ISO/DTS Electronic fee collection — Requirements for ISO/IEC CD Telecommunications and information exchange 21193 EFC application interfaces on common media 21559-6 between systems — Future network protocols and mechanisms — Part 6: Proxy based quality TC 213 Dimensional and geometrical product of service specifications and verification ISO/IEC CD Telecommunications and information exchange ISO/CD 8062-4 Geometrical product specifications (GPS) — 21559-7 between systems — Future network protocols Dimensional and geometrical tolerances for and mechanisms — Part 7: Networking of moulded parts — Part 4: General tolerances for everything castings using profile tolerancing in a general datum system ISO/IEC/IEEE Systems and software engineering — Life cycle CD 16085 processes — Risk management TC 215 Health informatics ISO/IEC PDTS Information technology — Systems and ISO/CD 17439 Health informatics — Development of terms 25025 software Quality Requirements and Evaluation and definitions for health informatics (SQuaRE) — Measurement of IT service quality TC 255 Biogas ISO/IEC CD Linux Standard Base (LSB) — Part 1-1: Ge- ISO/CD 23590 Household Biogas System Requirements 23360-1-1 neric, common definitions TC 301 Energy management and energy ISO/IEC CD Linux Standard Base (LSB) — Part 1-2: Ge- savings 23360-1-2 neric, core specification ISO/IEC CD Linux Standard Base (LSB) — Part 1-3: Ge- ISO/CD 50003 Energy management systems — Requirements 23360-1-3 neric, desktop specification for bodies providing audit and certification of energy management systems ISO/IEC CD Linux Standard Base (LSB) — Part 1-4: Ge- 23360-1-4 neric, languages specification TC 304 Healthcare organization management ISO/IEC CD Linux Standard Base (LSB) — Part 1-5: Ge- ISO/CD 22956 Healthcare organization management-- Patient 23360-1-5 neric, imaging specification Centered Staffing ISO/IEC CD Information technology — Security techniques TMBG Technical Management Board - groups 13888-1 — Non-repudiation — Part 1: General ISO/CD Guide Guidelines for addressing climate change in ISO/IEC CD Information technology — Security techniques 84 standards 13888-3 — Non-repudiation — Part 3: Mechanisms JTC 1 Information technology using asymmetric techniques ISO/IEC CD Information technology — Security techniques 27014 — Governance of information security
ISO Update, Supplement to ISO Focus -- June 2019 3 ISO/IEC PDTS Information Technology — Security Techniques PC 315 Indirect, temperature-con- 27570 — Privacy guidelines for Smart Cities trolled refrigerated delivery ISO/IEC Information technology — Coding of audio- services – land transport of 14496-12/ visual objects — Part 12: ISO base media parcels with intermediate PDAM 4 file format — Amendment 4: Compact movie transfer fragments ISO/DIS 23412 Indirect, temperature-controlled ISO/IEC CD Information technology — Virtual keyboards refrigerated delivery services — 22121-2 user interfaces — Part 2: On-screen keyboards Land transport of parcels with 2019-07-30 with direct touch interface intermediate transfer ISO/IEC PDTR Information technology — Cloud service meter- PC 320 Tableware, giftware, jewel- 23613 ing and billing elements lery and luminaries, made ISO/IEC PDTR Information technology - Data centres - Impact of glass - Glass clarity 21897 of ISO 52000 standards for energy perfor- - Classification and test mance of buildings method ISO/IEC CD Information technology — Data centre facilities ISO/DIS 24117 Tableware, giftware, jewellery 22237-1 and infrastructures — Part 1: General concepts and luminaries, made of glass ISO/IEC CD Information technology — Data centre fa- — Glass clarity — Classification 2019-08-07 22237-3 cilities and infrastructures — Part 3: Power and test method distribution TC 5 Ferrous metal pipes and ISO/IEC CD Information technology — Data centre facilities metallic fittings 22237-4 and infrastructures — Part 4: Environmental ISO/DIS 7369 Pipework — Metal hoses and control hose assemblies — Vocabulary
2019-07-29
(Revision of ISO 7369:2004) TC 6 Paper, board and pulps ISO/DIS Paper, board and pulps — De- 6588-1 termination of pH of aqueous ex- tracts — Part 1: Cold extraction 2019-08-01 DIS circulated (Revision of ISO 6588-1:2012) ISO/DIS Paper, board and pulps — De- Period from 01 May to 31 May 2019 6588-2 termination of pH of aqueous These documents have obtained substantial support within the ap- extracts — Part 2: Hot extraction 2019-08-01 propriate ISO technical committee. They have been submitted to the ISO member bodies for voting by (Revision of ISO 6588-2:2012) the date shown. ISO/DIS Paper and board — Determina- * Available in English only 2493-2 tion of resistance to bending — Part 2: Taber-type tester 2019-08-02
(Revision of ISO 2493-2:2011) Vote TC 8 Ships and marine terminates technology
ISO/DIS Ships and marine technology — IIW International Institute of 20661.2 Cutter suction dredger supervi- Welding sory and control system 2019-07-02 ISO/DIS Friction stir welding — Alumini- 25239-1 um — Part 1: Vocabulary ISO/DIS Ships and marine technology — 2019-08-14 20662.2 Hopper dredger supervisory and control system 2019-07-02 (Revision of ISO 25239-1:2011) ISO/DIS Friction stir welding — Alu- ISO/DIS Ships and marine technology — 25239-2 minium — Part 2: Design of weld 20663.2 Grab dredger supervisory and joints 2019-08-14 control system 2019-07-02
(Revision of ISO 25239-2:2011) ISO/DIS 21195 Ships and marine technology ISO/DIS Friction stir welding — Alu- — Systems for the detection of 25239-3 minium — Part 3: Qualification of persons while going overboard 2019-08-16 welding operators 2019-08-14 from ships (Man overboard detection) (Revision of ISO 25239-3:2011) (Revision of ISO/PAS ISO/DIS Friction stir welding — Alu- 21195:2018) 25239-4 minium — Part 4: Specification TC 10 Technical product and qualification of welding 2019-08-14 documentation procedures (Revision of ISO 25239-4:2011) ISO 129- Technical product documenta- 1:2018/DAmd tion (TPD) — Presentation of ISO/DIS Friction stir welding — Alu- 1 dimensions and tolerances 2019-07-30 25239-5 minium — Part 5: Quality and — Part 1: General principles — inspection requirements 2019-08-14 Amendment 1
(Revision of ISO 25239-5:2011)
4 ISO Update, Supplement to ISO Focus -- June 2019 ISO/DIS Technical product documenta- ISO Acoustics — Noise emitted by 21143.2 tion (TPD) — Requirements on 11202:2010/ machinery and equipment — digital mock-up virtual assembly 2019-07-04 DAmd 1 Determination of emission sound 2019-08-14 test for mechanical products pressure levels at a work station and at other specified positions TC 21 Equipment for fire protec- applying approximate environ- tion and fire fighting mental corrections — Amend- ISO Fire protection equipment — ment 1 6183:2009/ Carbon dioxide extinguishing TC 45 Rubber and rubber DAmd 2 systems for use on premises 2019-08-05 — Design and installation — products Amendment 2 ISO/DIS 3387 Rubber — Determination of crys- tallization effects by hardness TC 22 Road vehicles measurements 2019-08-02 ISO/DIS 21780 Road vehicles — Supply voltage of 48 V — Electrical require- (Revision of ISO 3387:2012) ments and tests 2019-08-19 ISO/DIS 3865 Rubber, vulcanized or thermo-
plastic — Methods of test for TC 23 Tractors and machinery for staining in contact with organic 2019-08-02 agriculture and forestry material (Revision of ISO 3865:2005) ISO 4254- Agricultural machinery — Safety 1:2013/DAmd — Part 1: General requirements ISO/DIS 7725 Rubber and rubber products — 1 — Amendment 1 2019-08-21 Determination of chlorine and bromine content 2019-08-05
ISO/DIS 6533 Forestry machinery — Portable (Revision of ISO 7725:1991) chain-saw front hand-guard — Dimensions and clearances 2019-08-08 TC 54 Essential oils ISO/DIS 3475 Essential oil of aniseed (Pimp- (Revision of ISO 6533:2012) inella anisum L.) TC 34 Food products 2019-08-02
ISO/DIS 21983 Guidelines for harvesting, trans- (Revision of ISO 3475:2002) portation, separation of stigma, drying and storage of saffron 2019-08-06 TC 59 Buildings and civil engi- before packing neering works ISO/DIS 660 Animal and vegetable fats and ISO/DIS 21678 Sustainability in buildings and oils — Determination of acid civil engineering works — Indica- value and acidity 2019-08-21 tors and benchmarks — Prin- 2019-08-12 ciples for the development and (Revision of ISO 660:2009) use of benchmarks TC 35 Paints and varnishes TC 61 Plastics ISO/DIS Preparation of steel substrates ISO/DIS Plastics — Temperature modu- 8501-4 before application of paints 19935-2 lated DSC — Part 2: Measure- and related products — Visual 2019-08-01 ment of accurate specific heat 2019-08-12 assessment of surface cleanli- Cp ness — Part 4: Initial surface ISO/DIS 20819 Plastics — Wood-plastic conditions, preparation grades recycled composites (WPRC) and flash rust grades in connec- — Specification 2019-08-22 tion with water jetting
(Revision of ISO 8501-4:2006) (Revision of ISO 20819:2018) ISO/DIS Preparation of steel substrates ISO/DIS 22841 Composites and reinforcements 8502-6 before application of paints and fibres — Carbon fibre reinforced related products — Tests for the 2019-08-01 plastics(CFRPs) and metal as- 2019-08-14 assessment of surface cleanli- semblies — Determination of the ness — Part 6: Extraction of tensile lap-shear strength water soluble contaminants for analysis — The Bresle method TC 70 Internal combustion (Revision of ISO 8502-6:2006) engines ISO/DIS Preparation of steel substrates ISO/DIS Methods of test for full-flow 8502-9 before application of paints and 4548-5 lubricating oil filters for internal related products — Tests for the 2019-08-01 combustion engines — Part 5: 2019-08-01 assessment of surface cleanli- Test for cold start simulation and ness — Part 9: Field method for hydraulic pulse durability the conductometric determina- (Revision of ISO 4548-5:2013) tion of water-soluble salts (Revision of ISO 8502-9:1998) TC 71 Concrete, reinforced concrete and pre-stressed TC 43 Acoustics concrete ISO/DIS 5135 Acoustics — Determination of ISO/DIS 22904 Additions for concrete sound power levels of noise from air-terminal devices, air-terminal 2019-08-16 2019-08-16 units, dampers and valves by measurement in a reverberation test room (Revision of ISO 5135:1997)
ISO Update, Supplement to ISO Focus -- June 2019 5 ISO/DIS 14484 Performance guidelines for de- TC 98 Bases for design of sign of concrete structures using structures fibre-reinforced polymer (FRP) 2019-08-01 materials ISO/DIS 13824 Bases for design of structures (Revision of ISO 14484:2013) — General principles on risk assessment of systems involving 2019-08-08 TC 82 Mining structures ISO/DIS Mining — Terminology — Part 1: (Revision of ISO 13824:2009) 22932-1 Planning and surveying TC 106 Dentistry 2019-07-26 ISO/DIS 20888 Dentistry — Terminology for forensic oro-dental data TC 84 Devices for administration 2019-07-26 of medicinal products and catheters ISO/DIS 9997 Dentistry — Cartridge syringes ISO/DIS Sterile hypodermic syringes for 7886-2 single use — Part 2: Syringes for 2019-07-26 use with power-driven syringe 2019-08-09 pumps (Revision of ISO 9997:1999) (Revision of ISO 7886-2:1996) ISO/DIS 22569 Dentistry — Multifunction ISO/DIS Sterile hypodermic syringes handpieces 7886-3 for single use — Part 3: Auto- 2019-08-02 disabled syringes for fixed-dose 2019-08-09 immunization ISO/DIS 22052 Dentistry - Central compressed (Revision of ISO 7886-3:2005) air source equipment ISO 10555- Intravascular catheters — Sterile 2019-08-05 6:2015/DAmd and single-use catheters — Part 1 6: Subcutaneous implanted 2019-08-05 (Revision of ISO/TS ports — Amendment 1 22595-2:2008) TC 85 Nuclear energy, nuclear ISO/DIS 17730 Dentistry — Fluoride varnishes technologies, and radio- logical protection 2019-08-14
ISO/DIS Measurement and prediction (Revision of ISO 17730:2014) 18310-2 of the ambient dose equivalent from patients receiving iodine 2019-08-12 TC 108 Mechanical vibration, 131 administration after thyroid shock and condition ablation — Part 2: After release monitoring from the hospital ISO/DIS Condition monitoring and diag- TC 89 Wood-based panels 16079-2 nostics of wind turbines — Part 2: Monitoring the drive train 2019-08-12 ISO/DIS Wood-based panels — Determi- 12460-3 nation of formaldehyde release — Part 3: Gas analysis method 2019-08-12 TC 119 Powder metallurgy ISO/DIS 4497 Metallic powders — Determi- (Revision of ISO 12460-3:2015) nation of particle size by dry ISO/DIS Plywood — Classification by sieving 2019-08-20 2426-1 surface appearance — Part 1: General 2019-08-06 (Revision of ISO 4497:1983) ISO/DIS 13517 Metallic powders — Determina- (Revision of ISO 2426-1:2000) tion of flowrate by means of a ISO/DIS Plywood — Classification by calibrated funnel (Gustavsson 2426-2 surface appearance — Part 2: flowmeter) Hardwood 2019-08-06 (Revision of ISO 13517:2013) TC 121 Anaesthetic and respiratory (Revision of ISO 2426-2:2000) equipment ISO/DIS 18775 Veneers — Terms and defini- ISO/DIS 21917 Anaesthetic and respiratory tions, determination of physical equipment — Voice prostheses characteristics and tolerances 2019-08-06 2019-08-22
(Revision of ISO 18775:2008) ISO/DIS 23368 Anaesthetic and respiratory TC 92 Fire safety equipment — Low flow nasal ISO/DIS 1182 Reaction to fire tests for prod- cannulae for oxygen therapy 2019-08-15 ucts — Non-combustibility test 2019-08-21 IEC 60601-1- Medical electrical equipment —
8:2006/DAmd Part 1-8: General requirements (Revision of ISO 1182:2010) 2 for basic safety and essential 2019-08-16 TC 96 Cranes performance — Collateral standard: General requirements, ISO/DIS Cranes — Graphical symbols — tests and guidance for alarm 7296-2 Part 2: Mobile cranes systems in medical electrical 2019-08-07 equipment and medical electrical
systems — Amendment 2 (Revision of ISO 7296-2:1996)
6 ISO Update, Supplement to ISO Focus -- June 2019 IEC 60601- Medical electrical equipment — ISO Plastics pipes and fittings — 1-10:2007/ Part 1-10: General requirements 21307:2017/ Butt fusion jointing procedures DAmd 2 for basic safety and essential 2019-08-16 DAmd 1 for polyethylene (PE) piping 2019-08-09 performance — Collateral stand- systems — Amendment 1 ard: Requirements for the devel- TC 146 Air quality opment of physiologic closed- loop controllers — Amendment 2 ISO/DIS 4225 Air quality — General aspects — Vocabulary IEC 60601- Medical electrical equipment — 2019-08-14 1-11:2015/ Part 1-11: General requirements
DAmd 1 for basic safety and essential 2019-08-16 (Revision of ISO 4225:1994) performance — Collateral stand- ard: Requirements for medical TC 147 Water quality electrical equipment and medical ISO/DIS 21793 Water quality — Determination electrical systems used in the of total organic carbon (TOC), home healthcare environment — dissolved organic carbon (DOC), Amendment 1 total bound nitrogen (TNb), dis- IEC 60601- Medical Electrical Equipment — solved bound nitrogen (DNb), 1-12:2015/ Part 1-12: General requirements total bound phosphorus (TPb) DAmd 1 for basic safety and essential 2019-08-16 and dissolved bound phospho- performance - Collateral Stand- rus (DPb) after wet chemical ard: Requirements for medical catalysed ozone hydroxyl radical electrical equipment and medical oxidation electrical systems used in the TC 150 Implants for surgery emergency medical services environment — Amendment 1 ISO/DIS Cardiovascular implants — 25539-2 Endovascular devices — Part 2: ISO 81060- Non-invasive sphygmomanom- Vascular stents 2019-07-30 2:2018/DAmd eters — Part 2: Clinical investi-
1 gation of intermittent automated 2019-08-12 (Revision of ISO 25539-2:2012) measurement type — Amend- ment 1 ISO 14243- Implants for surgery — Wear 1:2009/DAmd of total knee-joint prostheses TC 126 Tobacco and tobacco 1 — Part 1: Loading and displace- 2019-08-02 products ment parameters for wear-test- ISO/DIS 13276 Tobacco and tobacco products ing machines with load control — Determination of nicotine and corresponding environmen- purity — Gravimetric method 2019-08-09 tal conditions for test — Amend- using tungstosilicic acid ment 1 (Revision of ISO 13276:2017) ISO 14243- Implants for surgery — Wear TC 127 Earth-moving machinery 3:2014/DAmd of total knee-joint prostheses 1 — Part 3: Loading and displace- 2019-08-02 ISO/DIS 10968 Earth-moving machinery — Op- ment parameters for wear- erator's controls testing machines with displace- 2019-07-31 ment control and corresponding environmental conditions for test (Revision of ISO 10968:2004) — Amendment 1 ISO/DIS Earth-moving machinery — TC 156 Corrosion of metals and 19014-4 Functional safety — Part 4: Design and evaluation of 2019-08-02 alloys software and data transmission ISO/DIS 11845 Corrosion of metals and alloys — for safety-related parts of the General principles for corrosion control system testing 2019-08-06 (Revision of ISO 15998:2008, ISO/TS 15998-2:2012) (Revision of ISO 11845:1995) TC 131 Fluid power systems TC 159 Ergonomics ISO/DIS 10100 Hydraulic fluid power — Cylin- ISO/DIS Ergonomics of human-system ders — Acceptance tests 9241-394 interaction — Part 394: Ergo- 2019-08-08 nomic requirements for reducing 2019-08-20 undesirable biomedical effects (Revision of ISO 10100:2001, of visually induced motion sick- ISO 10100:2001/Amd 1:2012) ness during watching electronic images TC 133 Clothing sizing systems - size designation, size TC 161 Controls and protective measurement methods and devices for gas and/or oil digital fittings ISO 23551- Safety and control devices for ISO/DIS Performance evaluation protocol 8:2016/DAmd gas burners and gas-burning 20947-2 for digital fitting systems — Part 2 appliances — Particular require- 2019-08-06 2: Virtual garment 2019-08-20 ments — Part 8: Multifunctional controls — Amendment 2: Op- tional requirements for compo- TC 138 Plastics pipes, fittings and nents of burner control systems valves for the transport of TC 164 Mechanical testing of fluids metals
ISO Update, Supplement to ISO Focus -- June 2019 7 ISO/DIS Metallic materials — Sheet ISO/DIS 23266 Soil quality — Test for measur- 12004-1 and strip — Determination of ing the inhibition of reproduction forming-limit curves — Part 1: 2019-08-21 in oribatid mites (Oppia nitens) 2019-08-12 Measurement and application exposed to contaminants in soil of forming-limit diagrams in the TC 194 Biological and clinical eval- press shop (Revision of ISO 12004-1:2008) uation of medical devices ISO/DIS Metallic materials — Sheet ISO/DIS Biological evaluation of medical 12004-2 and strip — Determination of 10993-12 devices — Part 12: Sample prep- forming-limit curves — Part 2: 2019-08-21 aration and reference materials 2019-07-31 Determination of forming-limit curves in the laboratory (Revision of ISO 10993-12:2012) (Revision of ISO 12004-2:2008) ISO/DIS Biological evaluation of medical TC 168 Prosthetics and orthotics 10993-23 devices — Part 23: Tests for irritation 2019-07-31 ISO/DIS Prosthetics and orthotics — 8548-2 Limb deficiencies — Part 2: Method of describing lower limb 2019-07-29 TC 198 Sterilization of health care amputation stumps products (Revision of ISO 8548-2:1993) ISO/DIS Processing of health care ISO/DIS 8551 Prosthetics and orthotics — 17664-2 products — Information to be Functional deficiencies — De- provided by the medical device 2019-08-22 scription of the person to be 2019-07-29 manufacturer for the processing treated with an orthosis, clinical of medical devices — Part 2: objectives of treatment, and Non-critical medical devices functional requirements of the TC 206 Fine ceramics orthosis (Revision of ISO 8551:2003) ISO/DIS 23102 Fine ceramics (advanced ceramics, advanced technical TC 172 Optics and photonics ceramics) — Weibull statistics for 2019-08-21 ISO/DIS Ophthalmic implants — In- strength data of porous ceramics 11979-5 traocular lenses — Part 5: TC 213 Dimensional and geometri- Biocompatibility cal product specifications (Revision of ISO 11979-5:2006) and verification TC 174 Jewellery and precious ISO/DIS Geometrical product specifica- metals 10360-10 tions (GPS) — Acceptance and ISO Jewellery — Colours of gold reverification tests for coordinate 8654:2018/ alloys — Definition, range of col- measuring systems (CMS) — DAmd 1 ours and designation — Amend- 2019-07-25 Part 10: Laser trackers for meas- ment 1 uring point-to-point distances (Revision of ISO 10360-10:2016) TC 181 Safety of toys ISO/DIS Geometrical product specifica- ISO/DIS Safety of toys — Part 3: Migra- 13385-2 tions (GPS) — Dimensional 8124-3 tion of certain elements measuring equipment — Part 2: 2019-08-22 2019-08-09 Calliper depth gauges; Design and metrological characteristics (Revision of ISO 8124-3:2010, (Revision of ISO 13385-2:2011) ISO 8124-3:2010/Amd 1:2014, ISO 8124-3:2010/Amd 2:2018) ISO/DIS 22081 Geometrical product specifica- tions (GPS) — Geometrical toler- TC 184 Automation systems and ancing — General geometrical 2019-08-19 integration and dimensional specifications ISO/DIS Industrial automation systems (Revision of ISO 2768-2:1989) 10303-113 and integration — Product data TC 215 Health informatics representation and exchange — 2019-08-14 Part 113: Integrated application ISO/DIS Health informatics — Public resource: Mechanical design 17090-4 key infrastructure — Part 4: Digital signatures for healthcare 2019-08-05 ISO/DIS Industrial automation systems documents 20242-5 and integration — Service (Revision of ISO 17090-4:2014) interface for testing applications 2019-08-09 — Part 5: Application program TC 219 Floor coverings service interface ISO/DIS 2551 Textile floor coverings and textile ISO/DIS Automation systems and integra- floor coverings in tile form — 22549-1 tion — Assessment on conver- Determination of dimensional 2019-08-06 gence of informatization and 2019-08-21 changes due to the effects of industrialization for industrial varied water and heat conditions enterprises — Part 1: Framework and distortion out of plane and reference model (Revision of ISO 2551:1981) TC 188 Small craft ISO/DIS 12951 Textile floor coverings — Deter- mination of mass loss, fibre bind ISO/DIS Small craft — Waste systems and stair nosing appearance 2019-08-06 8099-2 — Part 2: Sewage treatment change using the Lisson Tretrad systems 2019-08-09 machine (Revision of ISO 12951:2015) TC 190 Soil quality
8 ISO Update, Supplement to ISO Focus -- June 2019 TC 244 Industrial furnaces and associated processing equipment ISO/DIS 23495 Industrial furnaces and as- sociated processing equip- ment — Safety requirements for 2019-07-25 steel converter and associated FDIS circulated equipment TC 261 Additive manufacturing Period from 01 May to 31 May 2019 ISO/ASTM DIS Additive manufacturing — Sys- 52941 tem performance and reliability These Final draft International Standards have been submitted to the — Standard test method for ac- 2019-08-02 ISO member bodies for formal approval by the date shown ceptance of powder-bed fusion * Available in English only machines for metallic materials for aerospace application ISO/ASTM DIS Additive manufacturing — Quali- Vote 52942 fication principles — Qualifying terminates machine operators of metal pow- 2019-08-02
der bed fusion machines and equipment used in aerospace TC 2 Fasteners applications ISO/FDIS Fasteners — Hexagon socket TC 268 Sustainable cities and 10642 countersunk head screws with communities reduced loadability 2019-07-16
ISO/DIS 37163 Smart community infrastructures (Revision of ISO 10642:2004, — Guidance on smart transpor- ISO 10642:2004/Amd 1:2012) tation for parking lot allocation 2019-08-22 in cities TC 5 Ferrous metal pipes and metallic fittings TC 292 Security and resilience ISO/FDIS Life cycle analysis and recycling ISO/DIS Security and resilience — Emer- 21053 of ductile iron pipes for water 22328-1 gency management — Commu- applications 2019-06-27 nity-based disaster early warning 2019-08-02
system — Part 1: Guidelines for implementation of a community- TC 8 Ships and marine based disaster early warning technology system ISO/FDIS Ships and marine technol- ISO/DIS 22392 Security and resilience — Com- 13617 ogy — Shipboard incinerators munity resilience — Guidelines — Requirements 2019-07-08 for conducting peer reviews TC 301 Energy management and (Revision of ISO 13617:2001) energy savings ISO/FDIS Ships and marine technology 21792 — Navigation and ship opera- ISO/DIS 50049 Calculation methods for energy tions — Guidelines for onboard 2019-06-27 efficiency and energy consump- telephone equipment tion variations at country, region 2019-07-25 and city levels: relation to energy TC 23 Tractors and machinery for savings and other factors agriculture and forestry TMBG Technical Management ISO 4254- Agricultural machinery — Safety Board - groups 11:2010/ — Part 11: Pick-up balers — FDAmd 1 Amendment 1 2019-06-27 ISO/DGuide 82 Guidelines for addressing sus-
tainability in standards 2019-08-30 ISO/FDIS Tractors and machinery for ag- 25119-2 riculture and forestry — Safety- (Revision of ISO Guide 82:2014) related parts of control systems — Part 2: Concept phase JTC 1 Information technology (Revision of ISO 25119-2:2018) ISO/IEC DIS Information technology - An up- TC 25 Cast irons and pig irons 21972 per level ontology for smart city indicators 2019-08-15 ISO/FDIS 185 Grey cast irons — Classification
2019-06-27 ISO/IEC DIS Information technology — User
20071-11 interface component accessibil- (Revision of ISO 185:2005) ity — Part 11: Guidance on text alternatives for images TC 28 Petroleum and related (Revision of ISO/IEC TS products, fuels and lu- 20071-11:2012) bricants from natural or ISO/IEC DIS Information technology — Af- synthetic sources 30150-1 fective computing user interface ISO/FDIS Petroleum products — Deter- (AUI) — Part 1: Model 2019-07-26 20846 mination of sulfur content of automotive fuels — Ultraviolet 2019-07-04 fluorescence method (Revision of ISO 20846:2011)
ISO Update, Supplement to ISO Focus -- June 2019 9 ISO/FDIS Petroleum products — Deter- TC 39 Machine tools 20884 mination of sulfur content of ISO/FDIS Machine tools — Environmental automotive fuels — Wavelength- 2019-07-04 14955-4 evaluation of machine tools — dispersive X-ray fluorescence Part 4: Principles for measuring 2019-06-27 spectrometry metal-forming machine tools and (Revision of ISO 20884:2011) laser processing machine tools TC 30 Measurement of fluid flow with respect to energy efficiency in closed conduits ISO/FDIS Test code for machine tools — ISO/FDIS Measurement of fluid flow in 230-3 Part 3: Determination of thermal 17089-1 closed conduits — Ultrasonic effects meters for gas — Part 1: Meters 2019-07-09 (Revision of ISO 230-3:2007) for custody transfer and alloca- ISO/FDIS Machine tools — Test condi- tion measurement 17543-1 tions for universal spindle heads (Revision of ISO 17089-1:2010) — Part 1: Accessory heads for 2019-07-10 TC 31 Tyres, rims and valves machines with horizontal spindle (horizontal Z-axis) ISO/FDIS Radio frequency identification 20909 (RFID) tyre tags TC 44 Welding and allied 2019-07-16 processes
ISO/FDIS Resistance welding — Destruc- ISO/FDIS Coding for radio frequency iden- 18592 tive testing of welds — Method 20910 tification (RFID) tyre tags for the fatigue testing of multi- 2019-07-04 2019-07-17 spot-welded specimens (Revision of ISO 18592:2009) ISO/FDIS Code designated diagonal tyres ISO/FDIS Specification and qualification of 4251-1 (ply rating marked series) for 15609-1 welding procedures for metallic agricultural tractors, trailers 2019-07-09 materials — Welding procedure 2019-07-25 and machines — Part 1: Tyre specification — Part 1: Arc designation and dimensions, and welding approved rim contours (Revision of ISO 15609-1:2004, (Revision of ISO 4251-1:2017) ISO 15609-1:2004/Cor 1:2005) ISO/FDIS Code designated diagonal tyres ISO/FDIS Specification and qualification of 4251-2 (ply rating marked series) for 15609-2 welding procedures for metallic agricultural tractors, trailers and 2019-07-09 materials — Welding procedure 2019-07-25 machines — Part 2: Tyre load specification — Part 2: Gas ratings welding (Revision of ISO 4251-2:2017) (Revision of ISO 15609-2:2001) ISO/FDIS Tyres and rims for logging and ISO/FDIS Soft soldering fluxes — Test 18807 forestry service 9455-16 methods — Part 16: Flux ef- 2019-07-12 ficacy test, wetting balance 2019-08-15 method (Revision of ISO 4251-5:1992, (Revision of ISO 9455-16:2013) ISO 4251-5:1992/Amd 1:1998) TC 61 Plastics TC 34 Food products ISO/FDIS Elastic adesives — Testing of ad- ISO/FDIS Oilseeds — Extraction of oil and 21194 hesively bonded joints — Bead 17059 preparation of methyl esters peel test 2019-07-12 of triglyceride fatty acids for 2019-06-27 analysis by gas chromatography TC 67 Materials, equipment and (rapid method) (Revision of ISO 17059:2007) offshore structures for pe- troleum, petrochemical and TC 35 Paints and varnishes natural gas industries ISO/FDIS Paints and varnishes — Determi- ISO/FDIS Petroleum and natural gas 3233-2 nation of the percentage volume 19903 industries — Concrete offshore of non-volatile matter — Part 2: 2019-06-27 structures 2019-07-11 Method using the determination of non-volatile-matter content in (Revision of ISO 19903:2006) accordance with ISO 3251 and determination of dry film density TC 71 Concrete, reinforced on coated test panels by the concrete and pre-stressed Archimedes' principle concrete (Revision of ISO 3233-2:2014) ISO/FDIS Test methods for fibre-reinforced ISO/FDIS Paints and varnishes — Guide- 21914 cementitious composites — 17872 lines for the introduction of Bending moment — Curvature scribe marks through coatings 2019-07-04 curve by four-point bending test on metallic panels for corrosion testing TC 76 Transfusion, infusion (Revision of ISO 17872:2007) and injection, and blood processing equipment for ISO/FDIS Paints and varnishes — Corro- 12944-5 sion protection of steel struc- medical and pharmaceuti- tures by protective paint systems 2019-08-02 cal use — Part 5: Protective paint ISO/FDIS Plastics collapsible containers systems 3826-1 for human blood and blood com- (Revision of ISO 12944-5:2018) ponents — Part 1: Conventional 2019-07-23 containers
10 ISO Update, Supplement to ISO Focus -- June 2019 (Revision of ISO 3826-1:2013) ISO 3691- Industrial trucks — Safety ISO/FDIS Infusion equipment for medical 1:2011/FDAmd requirements and verification — 8536-4 use — Part 4: Infusion sets for 1 Part 1: Self-propelled industrial 2019-07-05 single use, gravity feed 2019-07-18 trucks, other than driverless trucks, variable-reach trucks and (Revision of ISO 8536-4:2010, burden-carrier trucks — Amend- ISO 8536-4:2010/Amd 1:2013) ment 1 TC 85 Nuclear energy, nuclear TC 119 Powder metallurgy technologies, and radio- ISO/FDIS 3252 Powder metallurgy — Vocabulary logical protection ISO/ASTM Practice for use of a polymethyl- 2019-07-05 FDIS 51276 methacrylate dosimetry system 2019-07-16 (Revision of ISO 3252:1999) TC 120 Leather (Revision of ISO/ASTM 51276:2012) ISO/FDIS Leather — Vocabulary 15115.2 ISO/FDIS Measurement of radioactiv- 2019-07-03 11665-1 ity in the environment — Air: radon-222 — Part 1: Origins of 2019-08-05 radon and its short-lived decay TC 126 Tobacco and tobacco products and associated meas- products urement methods ISO/FDIS 2965 Materials used as cigarette (Revision of ISO 11665-1:2012) papers, filter plug wrap and filter ISO/FDIS Measurement of radioactiv- joining paper, including materi- 2019-07-16 11665-2 ity in the environment — Air: als having a discrete or oriented radon-222 — Part 2: Integrated 2019-08-05 permeable zone and materials measurement method for deter- with bands of differing perme- mining average potential alpha ability — Determination of air energy concentration of its short- permeability lived decay products (Revision of ISO 2965:2009) (Revision of ISO 11665-2:2012) ISO/FDIS Tobacco and tobacco products ISO/FDIS Nuclear criticality safety — Geo- 20193 — Determination of the width of 21391 metrical dimensions for subcriti- the strands of cut tobacco 2019-07-09 cality control — Equipment and 2019-07-03 layout (Revision of ISO 20193:2012) TC 91 Surface active agents ISO/FDIS E-liquid — Determination of 20714 nicotine, propylene glycol and ISO/FDIS Surface active agents — De- glycerol in liquids used in elec- 2019-07-16 21264.2 tergents — Determination of tronic nicotine delivery devices alkylphenol ethoxylates 2019-07-03 — Gas chromatographic method
TC 131 Fluid power systems TC 94 Personal safety -- Personal protective equipment ISO/FDIS Pneumatic fluid power — Test 20145.2 methods for measuring acoustic ISO/FDIS Clothing for protection against emission pressure levels of 2019-07-15 17492 heat and flame — Determination exhaust silencers of heat transmission on exposure 2019-07-11 to both flame and radiant heat ISO/FDIS Hydraulic fluid power — Moni- (Revision of ISO 17492:2003, 21018-4 toring the level of particulate ISO 17492:2003/Cor 1:2004) contamination in the fluid — Part 2019-07-24 4: Use of the light extinction ISO/FDIS PPE ensembles for firefighters technique 17723-1 undertaking hazardous materi- (Revision of ISO 21018-4:2016) als response activities — Part 1: 2019-07-08 Gas-tight, vapour-protective en- TC 138 Plastics pipes, fittings and sembles for emergency response valves for the transport of teams ("type 1") fluids TC 106 Dentistry ISO/FDIS Plastics piping systems for 4427-1 water supply, and for drainage ISO/FDIS Dentistry — Digital impression and sewerage under pressure 2019-07-12 20896-1 devices — Part 1: Methods for — Polyethylene (PE) — Part 1: assessing accuracy General TC 107 Metallic and other inorgan- (Revision of ISO 4427-1:2007, ic coatings ISO 4427-1:2007/Cor 1:2008, ISO 4427-1:2007/Amd 1:2015) ISO/FDIS Vitreous and porcelain enam- 28763 els — Regenerative, enamelled ISO/FDIS Plastics piping systems for and packed panels for air-gas 2019-07-12 4427-2 water supply, and for drainage and gas-gas heat exchangers and sewerage under pressure 2019-07-12 — Specifications — Polyethylene (PE) — Part 2: (Revision of ISO 28763:2008) Pipes (Revision of ISO 4427-2:2007, TC 110 Industrial trucks ISO 4427-2:2007/Amd 1:2014)
ISO Update, Supplement to ISO Focus -- June 2019 11 ISO/FDIS Plastics piping systems for ISO/FDIS Ophthalmic implants — Ocular 4427-3 water supply, and for drainage 16672 endotamponades and sewerage under pressure 2019-07-12 2019-06-27 — Polyethylene (PE) — Part 3: Fittings (Revision of ISO 16672:2015) (Revision of ISO 4427-3:2007) TC 184 Automation systems and ISO/FDIS Plastics piping systems for water integration 4427-5 supply, and for drainage and sewerage under pressure — Pol- 2019-07-12 ISO/FDIS Automation systems and yethylene (PE) — Part 5: Fitness 20140-1 integration — Evaluating energy for purpose of the system efficiency and other factors of 2019-07-22 (Revision of ISO 4427-5:2007) manufacturing systems that influence the environment — ISO/FDIS 8483 Glass-reinforced thermosetting Part 1: Overview and general plastics (GRP) pipes and fittings principles — Test methods to prove the 2019-07-12 (Revision of ISO 20140-1:2013) design of bolted flange joints (Revision of ISO 8483:2003, ISO TC 190 Soil quality 8483:2003/Amd 1:2012) ISO/FDIS Soil quality — Field soil ISO/FDIS 8533 Glass-reinforced thermosetting 25177 description plastics (GRP) pipes and fittings — Test methods to prove the 2019-07-12 (Revision of ISO 25177:2008) design of cemented or wrapped ISO/FDIS Soil quality — Sampling of soil joints 23611-3 invertebrates — Part 3: Sampling (Revision of ISO 8533:2003, ISO and extraction of enchytraeids 2019-07-11 8533:2003/Amd 1:2012) TC 147 Water quality (Revision of ISO 23611-3:2007) ISO/FDIS Water quality — Multi-compound ISO/FDIS Soil quality — Characterization 21253-1 class methods — Part 1: Criteria 15800 of soil with respect to human for the identification of target 2019-07-05 exposure 2019-07-23 compounds by gas and liquid chromatography and mass (Revision of ISO 15800:2003) spectrometry TC 197 Hydrogen technologies ISO/FDIS Water quality — Multi-compound ISO/FDIS Gaseous hydrogen — Cylinders 21253-2 class methods — Part 2: Criteria 19884 and tubes for stationary storage for the quantitative determination 2019-07-05 2019-07-12 of organic substances using a multi-compound class analytical method TC 201 Surface chemical analysis TC 153 Valves ISO/FDIS Surface chemical analysis — X- 10810 ray photoelectron spectroscopy ISO/FDIS 5209 General purpose industrial valves — Guidelines for analysis 2019-07-03 — Marking 2019-07-16 (Revision of ISO 10810:2010)
(Revision of ISO 5209:1977) TC 204 Intelligent transport systems TC 166 Ceramic ware, glassware and glass ceramic ware in ISO/FDIS Intelligent transport systems 17515-3 — Evolved-universal terrestrial contact with food radio access network — Part 3: 2019-07-03 ISO/FDIS Ceramic ware, glass ceramic LTE-V2X 6486-1 ware and glass dinnerware in TC 205 Building environment contact with food — Release 2019-07-22 of lead and cadmium — Part 1: design Test method ISO/FDIS Building environment design — (Revision of ISO 6486-1:1999) 19454 Indoor environment — Daylight ISO/FDIS Glass hollowware in contact with opening design for sustainability 2019-07-22 7086-1 food — Release of lead and cad- principles in visual environment mium — Part 1: Test method 2019-07-22 TC 210 Quality management and corresponding general as- (Revision of ISO 7086-1:2000) pects for medical devices TC 171 Document management ISO/FDIS Medical devices — Application applications 14971 of risk management to medical ISO/FDIS Document management — AFP devices 2019-07-04 22550 interchange for PDF 2019-06-27 (Revision of ISO 14971:2007) TC 213 Dimensional and geometri- TC 172 Optics and photonics cal product specifications ISO/FDIS Optics and photonics — Prepa- and verification 10110-1 ration of drawings for optical ISO/FDIS Geometrical product specifica- elements and systems — Part 1: 13385-1 tions (GPS) — Dimensional General measuring equipment — Part 1: 2019-06-27 (Revision of ISO 10110-10:2004, Design and metrological charac- ISO 10110-1:2006) teristics of callipers (Revision of ISO 13385-1:2011)
12 ISO Update, Supplement to ISO Focus -- June 2019 TC 221 Geosynthetics ISO/IEC FDIS Information technology — Ser- 20000-2 vice management — Part 2: ISO/FDIS Geosynthetics — Installing and Guidance on the application of 2019-07-12 13437 retrieving samples in the field for service management systems durability assessment 2019-07-04 (Revision of ISO/IEC
20000-2:2012) (Revision of ISO 13437:1998) ISO/IEC FDIS Information technology — Ser- TC 228 Tourism and related 20000-3 vice management — Part 3: services Guidance on scope definition 2019-07-05 ISO/FDIS Recreational diving services — and applicability of ISO/IEC 21416 Requirements and guidance 20000-1 on environmentally sustainable 2019-07-04 (Revision of ISO/IEC practices in recreational diving 20000-3:2012) TC 276 Biotechnology
ISO/FDIS Biotechnology — Requirements 20395 for evaluating the performance of quantification methods for 2019-07-03 nucleic acid target sequences — qPCR and dPCR TC 285 Clean cookstoves and clean cooking solutions Standards published ISO/FDIS Clean cookstoves and clean 19869 cooking solutions — Field test- ing methods for cookstoves 2019-07-23 New International Standards published between 01 May and 31 May 2019 JTC 1 Information technology ISO/IEC FDIS Identification cards — Integrated 1 delayed publication of language version 7816-8 circuit cards — Part 8: Com- 2 corrected version mands and mechanisms for 2019-07-09 3 multilingual document security operations (Revision of ISO/IEC
7816-8:2016) Price ISO/IEC FDIS Information security manage- group 27102 ment — Guidelines for cyber insurance 2019-07-24 CIE International Commission on Illumination ISO/IEC FDIS Information technology — Digi- 10918-7 tal compression and coding of ISO/CIE en Erythema reference action spectrum continuous-tone still images — 2019-06-28 17166:2019 and standard erythema dose Part 7: Reference software A
ISO/IEC FDIS Information technology — JPEG 15444-1 2000 image coding system — PC 287 Chain of custody of wood and Part 1: Core coding system 2019-07-08 wood-based products ISO fr2 Chain of custody of wood and wood- (Revision of ISO/IEC 15444- 38200:2018 based products 1:2016, ISO/IEC 15444-1:2016/ E DAmd 1) ISO/IEC FDIS Information technology — JPEG TC 4 Rolling bearings 15444-16 2000 image coding system — Part 16: Encapsulation of 2019-07-08 ISO 355:2019 en Rolling bearings — Tapered roller JPEG 2000 Images into ISO/IEC fr bearings — Boundary dimensions 23008-12 and series designations F
ISO/IEC FDIS Information technologies — 19566-5 JPEG systems — Part 5: JPEG TC 6 Paper, board and pulps universal metadata box format 2019-07-07 ISO 5647:2019 en Paper and board — Determination of (JUMBF) titanium dioxide content ISO/IEC FDIS Information technology — Multi- A 21000-22 media framework (MPEG-21) — Part 22: User Description 2019-07-16 ISO 5628:2019 en Paper and board — Determination of bending stiffness — General prin- (Revision of ISO/IEC 21000- ciples for two-point, three-point and B 22:2016, ISO/IEC 21000- four-point methods 22:2016/Amd 1:2018) ISO en Tissue paper and tissue products ISO/IEC FDIS Information technology — Media 12625-11:2019 fr — Part 11: Determination of wet ball 23005-3 context and control — Part 3: burst strength B Sensory information 2019-07-06
(Revision of ISO/IEC TC 8 Ships and marine technology 23005-3:2016) ISO en Ships and marine technology — 11711-1:2019 Aquatic nuisance species — Part 1: Ballast water discharge sample port B
ISO Update, Supplement to ISO Focus -- June 2019 13 ISO en Ships and marine technology — TC 29 Small tools 20602:2019 Check valves for use in low tem- ISO/TS 13399- fr1 Cutting tool data representation and perature applications — Design and C 313:2019 exchange — Part 313: Creation and testing requirements exchange of 3D models — Burrs E ISO en Ships and marine technology — 21132:2019 Marine cranes — Operation and ISO en Bonded abrasive products — Limit maintenance requirements A 13942:2019 fr deviations and run-out tolerances
E TC 10 Technical product documentation ISO en Tools for pressing — Compression IEC/IEEE Preparation of information for use 10243:2019 fr springs with rectangular section 82079-1:2019 (instructions for use) of products — Housing dimensions and colour D — Part 1: Principles and general XH coding requirements TC 31 Tyres, rims and valves 1 ISO fr Technical product documentation ISO en Industrial tyres and rims — Rubber 18388:2016 (TPD) — Relief grooves — Types and 10499-1:2019 fr solid tyres (metric series) for pneu- dimensioning B matic tyre rims — Part 1: Designa- A tion, dimensions and marking TC 17 Steel TC 34 Food products ISO 5000:2019 en Steel sheet, aluminium-silicon alloy- ISO 9167:2019 en Rapeseed and rapeseed meals — coated by the continuous hot-dip fr Determination of glucosinolates process, of commercial and drawing C content — Method using high-perfor- E qualities mance liquid chromatography TC 20 Aircraft and space vehicles ISO en Milk and milk products — Determina- ISO en Space systems — Electrical, elec- 17678:2019 tion of milk fat purity by gas chroma- 14621-1:2019 tronic and electromechanical (EEE) tographic analysis of triglycerides D parts — Part 1: Parts management F ISO en Molecular biomarker analysis — ISO en Space systems — Electrical, elec- 20813:2019 fr Methods of analysis for the detection 14621-2:2019 tronic and electromechanical (EEE) and identification of animal species E parts — Part 2: Control programme B in foods and food products (nucleic requirements acid-based methods) — General requirements and definitions TC 21 Equipment for fire protection and fire fighting ISO en Sustainable and traceable cocoa 34101-1:2019 fr — Part 1: Requirements for cocoa ISO en Fire protection — Automatic sprinkler sustainability management systems F 6182-8:2019 systems — Part 8: Requirements and test methods for pre-action dry alarm D valves ISO en Sustainable and traceable cocoa — 34101-2:2019 fr Part 2: Requirements for performance ISO en Fire protection — Automatic sprinkler (related to economic, social and D 6182-11:2019 systems — Part 11: Requirements environmental aspects) and test methods for pipe hangers C ISO en Sustainable and traceable cocoa — 34101-3:2019 fr Part 3: Requirements for traceability TC 22 Road vehicles D ISO en Road vehicles — Interchange of 11992-1:2019 digital information on electrical con- ISO en Sustainable and traceable cocoa — nections between towing and towed D 34101-4:2019 fr Part 4: Requirements for certification vehicles — Part 1: Physical and data- schemes E link layers ISO/TS en Road vehicles — Multimedia data TC 35 Paints and varnishes 13499:2019 exchange format for impact tests B ISO 3251:2019 en Paints, varnishes and plastics — fr Determination of non-volatile-matter content B ISO en Road vehicles — Liquefied petroleum 20766-6:2019 gas (LPG) fuel systems components — Part 6: Pressure relief valves (PRV) A ISO en Paints and varnishes — Determi- 6504-1:2019 fr nation of hiding power — Part 1: Kubelka-Munk method for white and F TC 25 Cast irons and pig irons light-coloured paints ISO en Microstructure of cast irons — Part 4: ISO 9514:2019 en Paints and varnishes — Determina- 945-4:2019 Test method for evaluating nodularity fr tion of the pot life of multicomponent in spheroidal graphite cast irons E coating systems — Preparation and A conditioning of samples and guide- TC 28 Petroleum and related prod- lines for testing ucts, fuels and lubricants from ISO en Preparation of steel substrates before natural or synthetic sources 11124-5:2019 application of paints and related products — Specifications for metal- B ISO en Lubricants, industrial oils and related lic blast-cleaning abrasives — Part 5: 6521-1:2019 products (Class L) — Family D (com- Cut steel wire pressors) — Part 1: Specifications of A categories DAA and DAB (lubricants TC 37 Language and terminology for reciprocating and drip feed rotary air compressors)
14 ISO Update, Supplement to ISO Focus -- June 2019 ISO en Management of terminology resourc- ISO en Plastics — Determination of dynamic 12620:2019 es — Data category specifications 6721-4:2019 mechanical properties — Part 4: C Tensile vibration — Non-resonance B method TC 38 Textiles ISO en Plastics — Determination of dynamic 6721-11:2019 mechanical properties — Part 11: ISO fr2 Fibre ropes for offshore stationkeep- Glass transition temperature C 18692-1:2018 ing — Part 1: General specification
F ISO en Plastics — Determination of average 16014-1:2019 molecular weight and molecular TC 39 Machine tools weight distribution of polymers using C ISO 6779:2019 en Test conditions for vertical internal size-exclusion chromatography — fr type broaching machines — Testing Part 1: General principles of accuracy D ISO en Plastics — Determination of average
16014-2:2019 molecular weight and molecular TC 43 Acoustics weight distribution of polymers using B size-exclusion chromatography — ISO fr1 Acoustics — Noise from shooting Part 2: Universal calibration method 17201-3:2019 ranges — Part 3: Sound propagation calculations G ISO en Plastics — Determination of average 16014-3:2019 molecular weight and molecular weight distribution of polymers using C TC 44 Welding and allied processes size-exclusion chromatography — ISO/TR fr1 Mechanical joining — Guidelines for Part 3: Low-temperature method 12998:2019 fatigue testing of joints ISO en Plastics — Determination of average F 16014-4:2019 molecular weight and molecular
weight distribution of polymers using C ISO 5171:2019 en Gas welding equipment — Pressure size-exclusion chromatography — fr gauges used in welding, cutting and Part 4: High-temperature method allied processes C ISO en Plastics — Determination of average
16014-5:2019 fr molecular weight and molecular ISO en Welding — Friction welding of metal- weight distribution of polymers using D 15620:2019 fr lic materials size-exclusion chromatography — F Part 5: Light-scattering method
ISO en Plastics — Methods of exposure to TC 45 Rubber and rubber products 21475:2019 determine the wavelength depend- ent degradation using spectrally C ISO 1419:2019 en Rubber- or plastics-coated fabrics — dispersed radiation Accelerated-ageing tests A ISO en Measurement of antiviral activity 21702:2019 on plastics and other non-porous surfaces D TC 46 Information and documentation 1 ISO/TR fr Information and documentation — ISO 305:2019 en Plastics — Determination of thermal 21965:2019 Records management in enterprise fr stability of poly(vinyl chloride), related architecture F chlorine-containing homopolymers A and copolymers and their com- TC 54 Essential oils pounds — Discoloration method ISO 3140:2019 en Essential oil of sweet orange ex- ISO 1110:2019 en Plastics — Polyamides — Acceler- fr pressed [Citrus sinensis (L.)] fr ated conditioning of test specimens B A
TC 58 Gas cylinders ISO 4574:2019 en Plastics — PVC resins for general use — Determination of hot plasticizer ISO/TR en Gas cylinders — Compilation of absorption B 11364:2019 national and international valve stem/ gas cylinder neck threads and their E identification and marking system ISO en Plastics — Polybutene-1 (PB-1) 21302-1:2019 fr moulding and extrusion materials — TC 59 Buildings and civil engineering Part 1: Designation system and basis B works for specifications ISO en Sustainability in buildings and civil ISO en Plastics — Polybutene-1 (PB-1) 21931-2:2019 engineering works — Framework 21302-2:2019 fr moulding and extrusion materials — for methods of assessment of the D Part 2: Preparation of test specimens B environmental, social and economic and determination of properties performance of construction works as a basis for sustainability assess- ISO en Adhesives — Determination of shear ment — Part 2: Civil engineering 11003-2:2019 behaviour of structural adhesives works — Part 2: Tensile test method using C thick adherends TC 61 Plastics ISO en Adhesives — Determination of the ISO en2 Plastics — Methods for determining 15509:2019 bond strength of engineering-plastic 1183-1:2019 the density of non-cellular plastics joints B — Part 1: Immersion method, liquid B pycnometer method and titration method
ISO Update, Supplement to ISO Focus -- June 2019 15 ISO en Adhesives for organic electronic ISO en Dosimetry for exposures to cosmic 21760-1:2019 devices — Determination of water 20785-4:2019 radiation in civilian aircraft — Part 4: vapour transmission rate — Part 1: B Validation of codes B Adhesive film preparation methods ISO en Adhesives for organic electronic TC 86 Refrigeration and 21760-2:2019 devices — Determination of water air-conditioning vapour transmission rate — Part 2: A Edge seal methods ISO en Refrigerated storage cabinets and 22041:2019 fr counters for professional use — Per- ISO fr1 Plastics — Determination of the formance and energy consumption E 17556:2019 ultimate aerobic biodegradability of plastic materials in soil by measuring D the oxygen demand in a respirom- TC 92 Fire safety eter or the amount of carbon dioxide ISO/TR en Fire tests — Applicability of reaction evolved 17252:2019 to fire tests to fire modelling and fire TC 67 Materials, equipment and off- safety engineering E
shore structures for petroleum, petrochemical and natural gas ISO en Fire-resistance tests — Elements industries 834-13:2019 of building construction — Part 13: Requirements for the testing and as- E ISO en Petroleum and natural gas industry sessment of applied fire protection to 19345-1:2019 — Pipeline transportation systems steel beams with web openings — Pipeline integrity management H specification — Part 1: Full-life cycle ISO en Fire-resistance tests — Elements integrity management for onshore 834-14:2019 of building construction — Part 14: pipeline Requirements for the testing and as- D sessment of applied fire protection to ISO en Petroleum and natural gas industry solid steel bar 19345-2:2019 — Pipeline transportation systems — Pipeline integrity management H TC 104 Freight containers specification — Part 2: Full-life cycle ISO en Series 1 freight containers — Speci- integrity management for offshore 1496-3:2019 fication and testing — Part 3: Tank pipeline containers for liquids, gases and D ISO en Petroleum and natural gas industries pressurized dry bulk 10418:2019 — Offshore production installations TC 106 Dentistry — Process safety systems C ISO 4049:2019 en Dentistry — Polymer-based restora- fr tive materials ISO en Petroleum and natural gas industries E 19904-1:2019 — Floating offshore structures — Part 1: Ship-shaped, semi-submersible, H spar and shallow-draught cylindrical ISO en Dentistry — Nomenclature of oral structures 16202-1:2019 fr anomalies — Part 1: Code for the representation of oral anomalies A TC 76 Transfusion, infusion and injection, and blood process- ISO en Dentistry — Nomenclature of oral ing equipment for medical and 16202-2:2019 fr anomalies — Part 2: Developmental pharmaceutical use anomalies of teeth A ISO en Pen systems — Part 3: Seals for pen- 13926-3:2019 injectors for medical use TC 110 Industrial trucks B ISO en Industrial trucks — Verification of 22915-21:2019 fr stability — Part 21: Order-picking TC 79 Light metals and their alloys trucks with operator position elevat- B ISO 3116:2019 en Magnesium and magnesium alloys — ing above 1 200 mm Wrought magnesium and magnesium TC 118 Compressors and pneumatic alloys E tools, machines and equipment
ISO 28927- en Hand-held portable power tools TC 82 Mining 8:2009/Amd — Test methods for evaluation of ISO en Mining — Classification of mine ac- 2:2019 vibration emission — Part 8: Saws, XZ 19434:2017/ cidents — Amendment 1 polishing and filing machines with Amd 1:2019 XZ reciprocating action and small saws with oscillating or rotating action — Amendment 2: Oscillating knives TC 85 Nuclear energy, nuclear (vibrating screen removal tools) technologies, and radiological protection TC 120 Leather ISO en Measurement of radioactivity in the ISO en Leather — Full chrome upper leather 11665-9:2019 environment — Air: Radon-222 — 20942:2019 — Specification and test methods Part 9: Test methods for exhalation F B rate of building materials ISO en Nuclear facilities — Ventilation pen- TC 121 Anaesthetic and respiratory 15080:2001/ fr etrations for shielded enclosures — equipment Amd 1:2019 Amendment 1 XZ IEC 80601-2- Medical electrical equipment — Part 26:2019 2-26: Particular requirements for the basic safety and essential perfor- BD mance of electroencephalographs
16 ISO Update, Supplement to ISO Focus -- June 2019 TC 123 Plain bearings ISO en Optics and photonics — Spectro- 19962:2019 fr scopic measurement methods for ISO en Plain bearings — Appearance and integrated scattering by plane parallel D 7146-1:2019 characterization of damage to metal- optical elements lic hydrodynamic bearings — Part 1: G General TC 173 Assistive products ISO en Plain bearings — Appearance and ISO en Walking trolleys — Requirements and 7146-2:2019 characterization of damage to 19894:2019 fr test methods metallic hydrodynamic bearings — C F Part 2: Cavitation erosion and its countermeasures TC 174 Jewellery and precious metals TC 126 Tobacco and tobacco products ISO 9202:2019 en Jewellery and precious metals — ISO en Water pipe tobacco smoking ma- fr Fineness of precious metal alloys 22486:2019 chine — Definitions and standard A conditions B TC 180 Solar energy ISO/TS en Water pipe tobacco — Determination ISO en Solar energy — Collector com- 22487:2019 of total collected matter and nicotine 22975-5:2019 ponents and materials — Part 5: using a water pipe tobacco smoking B Insulation material durability and F machine performance ISO/TS en Water pipe tobacco — Determination 22491:2019 of carbon monoxide in the vapour TC 181 Safety of toys phase of water pipe tobacco smoke B ISO en Safety of toys — Part 10: Experi- — NDIR method 8124-10:2019 mental sets for chemistry and related activities D ISO/TS en Water pipe tobacco products —
22492:2019 Determination of carbon monoxide emission of glowing water pipe B ISO en Safety of toys — Part 11: Chemical charcoal — NDIR method 8124-11:2019 toys (sets) other than experimental sets G TC 145 Graphical symbols
ISO en Public information guidance systems 28564-3:2019 — Part 3: Guidelines for the design TC 182 Geotechnics and use of information index signs D ISO fr1 Geotechnical investigation and test- 22476-11:2017 ing — Field testing — Part 11: Flat dilatometer test C TC 146 Air quality
ISO en Workplace air — Gases and vapours 22065:2019 fr — Requirements for evaluation of TC 184 Automation systems and measuring procedures using pumped F integration samplers ISO 10303- en Industrial automation systems and ISO en Indoor air — Part 39: Determination 235:2019 integration — Product data repre- 16000-39:2019 of amines — Analysis of amines by sentation and exchange — Part 235: H (ultra-) high-performance liquid chro- B Application protocol: Engineering matography coupled to high resolu- properties and materials information tion or tandem mass spectrometry ISO/TR en Automation systems and integration TC 150 Implants for surgery 16161:2019 — Use case of capability profiles for cooperation between manufacturing G ISO en Implants for surgery — Wear of total software units 14243-5:2019 fr knee prostheses — Part 5: Durability performance of the patellofemoral C ISO en Automation systems and integration joint 20140-3:2019 — Evaluating energy efficiency and other factors of manufacturing sys- B TC 156 Corrosion of metals and alloys tems that influence the environment ISO en Corrosion of metals and alloys — — Part 3: Environmental performance 22479:2019 Sulfur dioxide test in a humid atmos- evaluation data aggregation process phere (fixed gas method) C TC 188 Small craft
ISO en Small craft — Hull construction and TC 159 Ergonomics 12215-5:2019 fr scantlings — Part 5: Design pres- ISO en Systems and software engineering — sures for monohulls, design stresses, H 25065:2019 Software product Quality Require- scantlings determination ments and Evaluation (SQuaRE) D TC 190 Soil quality — Common Industry Format (CIF) 1 for Usability: User requirements ISO fr Soil quality — Measurement of en- specification 20130:2018 zyme activity patterns in soil samples using colorimetric substrates in E TC 165 Timber structures micro-well plates ISO fr1 Timber structures — Bending TC 195 Building construction machin- 22389-1:2010 strength of I-beams ery and equipment — Part 1: Testing, evaluation and D characterization ISO en Building construction machinery 21873-2:2019 and equipment — Mobile crushers TC 172 Optics and photonics — Part 2: Safety requirements and F ISO en Optics and photonics — General op- verification 13653:2019 fr tical test methods — Measurement of TC 201 Surface chemical analysis relative irradiance in the image field C
ISO Update, Supplement to ISO Focus -- June 2019 17 ISO en Surface chemical analysis — Sec- TC 220 Cryogenic vessels 22415:2019 ondary ion mass spectrometry — ISO 21013- en Cryogenic vessels — Pilot operated Method for determining yield volume E 4:2012/Amd pressure relief devices — Part 4: in argon cluster sputter depth profil- 1:2019 Pressure-relief accessories for cryo- XZ ing of organic materials genic service — Amendment 1 ISO en Surface chemical analysis — Scan- ISO 21029- en Cryogenic vessels — Transportable 11952:2019 ning-probe microscopy — Deter- 1:2018/Amd vacuum insulated vessels of not more mination of geometric quantities G 1:2019 than 1 000 litres volume — Part 1: XZ using SPM: Calibration of measuring Design, fabrication, inspection and systems tests — Amendment 1 TC 204 Intelligent transport systems TC 221 Geosynthetics ISO/TS en Intelligent transport systems — ISO en Geotextiles and geotextile-related 19091:2019 Cooperative ITS — Using V2I and 11058:2019 fr products — Determination of water I2V communications for applications H permeability characteristics normal to C related to signalized intersections the plane, without load ISO en Intelligent transport systems — 19297-1:2019 Shareable geospatial databases TC 224 Service activities relating to for ITS applications — Part 1: B drinking water supply, waste- Framework water and stormwater systems ISO en Intelligent transport systems — ISO en Guidelines for the management of as- 20900:2019 Partially automated parking systems 24516-2:2019 fr sets of water supply and wastewater (PAPS) — Performance requirements D systems — Part 2: Waterworks F and test procedures ISO/TR en Intelligent transport systems (ITS) TC 229 Nanotechnologies 22085-1:2019 — Nomadic device service platform ISO/TS fr1 Nanotechnologies — Method to for micro-mobility — Part 1: General C 21361:2019 quantify air concentrations of carbon information and use case definitions black and amorphous silica in the C ISO en Intelligent transport systems — nanoparticle size range in a mixed 26683-3:2019 Freight land conveyance content dust manufacturing environment identification and communication E ISO/TR en Nanotechnologies — Considerations — Part 3: Monitoring cargo condition 22019:2019 for performing toxicokinetic studies information during transport with nanomaterials G TC 207 Environmental management ISO en Environmental management systems TC 249 Traditional Chinese medicine 14005:2019 fr — Guidelines for a flexible approach ISO en Traditional Chinese medicine — Test to phased implementation E 20487:2019 method of single-use acupuncture needles for electrical stimulation B TC 209 Cleanrooms and associated controlled environments ISO en2 Traditional Chinese medicine ISO en Cleanrooms and associated con- 20498-1:2019 — Computerized tongue image 14644-16:2019 fr trolled environments — Part 16: analysis system — Part 1: General B Energy efficiency in cleanrooms and F requirements separative devices ISO en Traditional Chinese medicine --Thera- TC 211 Geographic information/ 21291:2019 peutic fumigation devices Geomatics B
ISO en Geographic information — Ontology ISO en Traditional Chinese medicine — 19150-4:2019 — Part 4: Service ontology 21366:2019 General requirements for smokeless G moxibustion devices C
TC 213 Dimensional and geometrical ISO/TS en Traditional Chinese medicine — product specifications and 22990:2019 Categories of clinical terminological verification system to support the integration of B ISO en Geometrical product specifications clinical terms from traditional Chinese 25178-73:2019 fr (GPS) — Surface texture: Areal — medicine and Western medicine Part 73: Terms and definitions for B TC 256 Pigments, dyestuffs and surface defects on material measures extenders TC 215 Health informatics ISO en General methods of tests for pig- ISO/TS en Health informatics — Workforce roles 787-28:2019 ments and extenders — Part 28: 22287:2019 and capabilities for terminology and Determination of total content of D terminology services in healthcare E polychlorinated biphenyls (PCB) by (term workforce) dissolution, cleanup and GC-MS TC 217 Cosmetics TC 268 Sustainable cities and ISO/TR en Cosmetics — Methods of extract communities 22582:2019 fr evaporation and calculation of ISO en Sustainable cities and communities organic indexes — Supplemental A 37122:2019 fr — Indicators for smart cities information to use with ISO 16128-2 H ISO/TR en Cosmetics — Calculation of organic 23199:2019 fr indexes of hydrolates — Supplemen- tal information for ISO 16128-2 A
18 ISO Update, Supplement to ISO Focus -- June 2019 ISO en Smart community infrastructures — ISO/IEC en Information technology — Digitally 37159:2019 Smart transportation for rapid transit 30191:2015/ recorded media for information inter- in and between large city zones and B Amd 1:2019 change and storage — 120 mm Triple XZ their surrounding areas Layer (100,0 Gbytes single sided disk and 200,0 Gbytes double sided disk) TC 281 Fine bubble technology and Quadruple Layer (128,0 Gbytes ISO/TS en Fine bubble technology — Agricultur- single sided disk) BD Recordable 23016-1:2019 al applications — Part 1: Test method disk — Amendment 1 for evaluating the growth promotion B ISO/IEC en Information technology — Digi- of hydroponically grown lettuce 30192:2016/ tally recorded media for information TC 282 Water reuse Amd 1:2019 interchange and storage — 120 mm XZ Single Layer (25,0 Gbytes per disk) ISO en Purified water and water for injection and Dual Layer (50,0 Gbytes per disk) 22519:2019 pretreatment and production systems BD Rewritable disk — Amendment 1 E ISO/IEC en Information technology — Computer 18040:2019 graphics, image processing and ISO en A method to calculate and express environmental data representation — F 21939-1:2019 energy consumption of industrial Live actor and entity representation in wastewater treatment for the purpose B mixed and augmented reality (MAR) of water reuse — Part 1: Biological processes ISO/IEC en IT Security techniques — Encryption 18033-6:2019 algorithms — Part 6: Homomorphic TC 286 Collaborative business rela- encryption C tionship management ISO/TR en Principles for successful collaborative ISO/IEC en IT Security and Privacy — A frame- 44000:2019 business relationship management 24760-1:2019 work for identity management — Part A 1: Terminology and concepts D
IULTCS International Union of Leather ISO/IEC en Information technology — Generic Technologists and Chemists 13818-1:2019 coding of moving pictures and as- Societies sociated audio information — Part 1: H ISO en Leather — Chemical tests — De- Systems 22517:2019 fr termination of pesticide residues ISO/IEC en Information technology — JPEG XS content C 21122-1:2019 low-latency lightweight image cod- ing system — Part 1: Core coding G JTC 1 Information technology system ISO/IEC en Information technology — Conform- ISO/IEC en Information technology — Object 19823-21:2019 ance test methods for security ser- 19515:2019 Management Group Automated vice crypto suites — Part 21: Crypto D Function Points (AFP), 1.0 E suite SIMON
ISO/IEC en Information technology — Conform- ISO/IEC en Information technology — Self-con- 19823-22:2019 ance test methods for security ser- 23681:2019 tained Information Retention Format vice crypto suites — Part 22: Crypto D (SIRF) Specification F suite SPECK
ISO/IEC TR en Information technology database ISO/IEC en Information technology — Tel- 19075-8:2019 languages — SQL technical reports 21228:2019 ecommunications and informa- — Part 8: Multi-dimensional arrays G tion exchange between systems A (SQL/MDA) — Coexistence mechanism for broadband powerline communication ISO/IEC en Information technology — Collec- technologies 13251:2019 tion of graphical symbols for office equipment H ISO/IEC en Software and systems engineering —
26552:2019 Tools and methods for product line architecture design G ISO/IEC en Information technology — Develop- 30071-1:2019 ment of user interface accessibility — Part 1: Code of practice for creating F ISO/IEC en Software and systems engineering — accessible ICT products and services 26560:2019 Tools and methods for product line product management F ISO/IEC en Information technology — User 30113-5:2019 interface — Gesture-based interfaces across devices and methods — Part C ISO/IEC en2 Identification cards — Recording 5: Gesture Interface Markup Lan- 7811-6:2018 technique — Part 6: Magnetic stripe: guage (GIML) High coercivity D ISO/IEC en Information technology — Conform- 29109-5:2019 ance testing methodology for biomet- ISO/IEC en Information technology — Digi- ric data interchange formats defined D 30190:2016/ tally recorded media for information in ISO/IEC 19794 — Part 5: Face Amd 1:2019 interchange and storage — 120 mm XZ image data Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) ISO/IEC en Information technology — Object BD Recordable disk — Amendment 1 30106-1:2016/ oriented BioAPI — Part 1: Architec- Amd 1:2019 ture — Amendment 1: Additional XZ specifications and conformance statements
ISO Update, Supplement to ISO Focus -- June 2019 19 ISO/IEC en Information technology — Use of ISO 11515:2013 30137-1:2019 biometrics in video surveillance sys- TC 59 Buildings and civil engineering works tems — Part 1: System design and F specification ISO/TS 21929-2:2015 TC 61 Plastics ISO 845:2006 (reconfirmed) TC 68 Financial services ISO 6166:2013 TC 69 Applications of statistical methods Standards confirmed ISO 11462-1:2001 (reconfirmed) TC 83 Sports and other recreational facilities and equipment The following International Standards are confimred for a five year ISO 23537-1:2016 period: TC 91 Surface active agents ISO 304:1985 (reconfirmed) TC 2 Fasteners ISO 696:1975 (reconfirmed) ISO 1891:2009 ISO 4316:1977 (reconfirmed) TC 6 Paper, board and pulps ISO 4318:1989 (reconfirmed) ISO 10775:2013 ISO 4319:1977 (reconfirmed) TC 22 Road vehicles ISO 4320:1977 (reconfirmed) ISO 17458-1:2013 ISO 4322:1977 (reconfirmed) ISO 17458-2:2013 ISO 4324:1977 (reconfirmed) ISO 17458-3:2013 ISO 4326:1980 (reconfirmed) ISO 17458-4:2013 ISO 4327:1979 (reconfirmed) ISO 17458-5:2013 ISO 6121:1988 (reconfirmed) ISO 26865:2009 ISO 6122:1978 (reconfirmed) ISO 26866:2009 ISO 6384:1981 (reconfirmed) ISO 6626-2:2013 ISO 6387:1983 (reconfirmed) ISO 16121-1:2012 ISO 6388:1989 (reconfirmed) ISO 16121-3:2011 ISO 6835:1981 (reconfirmed) ISO 16121-4:2011 ISO 6836:1983 (reconfirmed) TC 23 Tractors and machinery for agriculture ISO 6837:1982 (reconfirmed) and forestry ISO 6839:1982 (reconfirmed) ISO 4254-13:2012 ISO 6840:1982 (reconfirmed) ISO 5718:2013 ISO 6841:1988 (reconfirmed) TC 27 Solid mineral fuels ISO 6842:1989 (reconfirmed) ISO 334:2013 ISO 6843:1988 (reconfirmed) TC 28 Petroleum and related products, fuels ISO 6844:1983 (reconfirmed) and lubricants from natural or synthetic sources ISO 6845:1989 (reconfirmed) ISO/TR 3666:1998 (reconfirmed) ISO 6889:1986 (reconfirmed) ISO 8697:1999 (reconfirmed) ISO 7535:1984 (reconfirmed) TC 34 Food products ISO 8212:1986 (reconfirmed) ISO 8214:1985 (reconfirmed) ISO 4174:1998 (reconfirmed) ISO 8215:1985 (reconfirmed) ISO 7973:1992 (reconfirmed) ISO 9101:1987 (reconfirmed) ISO 14864:1998 (reconfirmed) TC 35 Paints and varnishes TC 94 Personal safety -- Personal protective equipment ISO 2813:2014 ISO 4643:1992 (reconfirmed) ISO 16474-1:2013 TC 101 Continuous mechanical handling ISO 16474-2:2013 equipment ISO 16474-4:2013 ISO 1049:1975 (reconfirmed) ISO/TS ISO 1819:1977 (reconfirmed) 19397:2015 ISO 2140:1975 (reconfirmed) ISO 8501-2:1994 (reconfirmed) ISO 2327:1972 (reconfirmed) TC 46 Information and documentation ISO 2406:1974 (reconfirmed) ISO 3602:1989 (reconfirmed) ISO 3265:1974 (reconfirmed) TC 58 Gas cylinders
20 ISO Update, Supplement to ISO Focus -- June 2019 ISO 3569:1976 (reconfirmed) ISO 8986-1:2009 (replaced by ISO 21302-1:2019) ISO 5031:1977 (reconfirmed) ISO 8986-2:2009 (replaced by ISO 21302-2:2019) ISO 7189:1983 (reconfirmed) TC 156 Corrosion of metals and alloys TC 126 Tobacco and tobacco products ISO 3231:1993 (replaced by ISO 22479:2019) ISO 2971:2013 ISO 6988:1985 (replaced by ISO 22479:2019) ISO 3550-1:1997 (reconfirmed) TC 163 Thermal performance and energy use ISO 3550-2:1997 (reconfirmed) in the built environment TC 131 Fluid power systems ISO 12574-2:2008 (replaced by ) ISO 21287:2004 (reconfirmed) TC 204 Intelligent transport systems TC 134 Fertilizers, soil conditioners and benefi- ISO 24102-5:2013/ (replaced by ) cial substances Amd 1:2017
ISO 3944:1992 (reconfirmed) ISO 5311:1992 (reconfirmed) ISO 5313:1986 (reconfirmed) ISO 8397:1988 (reconfirmed) ISO 8398:1989 (reconfirmed) ISO 10248:1996 (reconfirmed) Meeting calendar ISO 10249:1996 (reconfirmed) The meeting calendar is available at TC 164 Mechanical testing of metals https://www.iso.org/meeting-calendar.html ISO 18265:2013 TC 178 Lifts, escalators and moving walks ISO/TR 14799-1:2015 ISO/TR 14799-2:2015 TC 186 Cutlery and table and decorative metal hollow-ware ISO 8442-2:1997 (reconfirmed) ISO 8442-3:1997 (reconfirmed) ISO 8442-4:1997 (reconfirmed) ISO 8442-6:2000 (reconfirmed) ISO 8442-7:2000 (reconfirmed) ISO 8442-8:2000 (reconfirmed) TC 190 Soil quality ISO 14154:2005 (reconfirmed) TC 194 Biological and clinical evaluation of medical devices ISO 10993-13:2010 ISO (reconfirmed) 10993-14:2001 TC 215 Health informatics ISO 22857:2013
Standards withdrawn
Period from 01 May to 31 May 2019
TC 34 Food products ISO 9167-1:1992 (replaced by ISO 9167:2019) ISO 9167-1:1992/ (replaced by ISO 9167:2019) Amd 1:2013 TC 61 Plastics
ISO Update, Supplement to ISO Focus -- June 2019 21