ISO Update Supplement to ISOfocus

September 2017

International Standards in process

ISO/CD 556 Coke (greater than 20 mm in size) — Determi- nation of mechanical strength An International Standard is the result of an agreement between ISO/CD 349 Hard coal — Audibert-Arnu dilatometer test the member bodies of ISO. A first important step towards an Interna- TC 34 Food products tional Standard takes the form of a committee draft (CD) - this is cir- culated for study within an ISO technical committee. When consensus ISO/CD 20588 Animal feeding stuffs — Terminology has been reached within the technical committee, the document is TC 37 Terminology and other language and sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the content resources member bodies casting a vote. A confirmation vote is subsequently ISO/CD 12620 Terminology and other language and content carried out on a final draft International Standard (FDIS), the approval resources — Data category specifications criteria remaining the same. ISO/CD Language resource management - Lexical

24613-1 markup framework (LMF) — Part 1: Core model

TC 38 Textiles ISO/DTR Textiles — Determination of certain flame 17881-3 retardants — Part 3: Chlorinated paraffin flame retardants ISO/CD Textiles — Qualitative and quantitative pro- 20418-3 teomic analysis of some animal hair fibers CD registered — Part 3: Peptide detection using LC-ESI-MS without protein reduction ISO/CD 20921 Textiles — Method for qualitative detection of Period from 01 August to 31 August 2017 organic raw cotton fibres using stable nitrogen isotope ratio measurements These documents are currently under consideration in the technical committee. ISO/CD 21701 Textiles --Test method for accelerated hydroly- sis of textile materials and biodegradation They have been registred at the Central Secretariat. under controlled composting conditions of the resulting hydrolysate TC 2 Fasteners ISO/CD 3175-5 Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 5: ISO/CD 2702 Heat-treated steel tapping screws — Mechani- Procedure for testing performance when clean- cal properties ing and finishing using dibutoxymethane TC 8 Ships and marine technology ISO/CD 3175-6 Textiles — Professional care, drycleaning ISO/DPAS Ships and marine technology — Systems for and wetcleaning of fabrics and garments 21195 the detection of persons while going overboard — Part 6: Procedure for testing perfor- from ships (Man overboard detection) mance when cleaning and finishing using TC 17 Steel decamethylpentacyclosiloxane ISO/CD 6935-2 Steel for the reinforcement of concrete — Part TC 39 Machine tools 2: Ribbed bars ISO/CD 6779 Acceptance conditions for broaching machines TC 20 Aircraft and space vehicles of vertical internal type — Testing of accuracy ISO/CD 21494 Space systems — Magnetic testing TC 41 Pulleys and belts (including veebelts) TC 22 Road vehicles ISO/CD 2790 Belt drives — V-belts for the automotive indus- try and corresponding pulleys — Dimensions ISO/CD Road vehicles — Vehicle roadworthiness ISO/CD 5289 Agricultural machinery — Endless hexagonal 20730-3 interface for electronic Periodical Technical belts and groove sections of corresponding Inspection (ePTI) — Part 3: Data definitions and pulleys requirements ISO/CD 19585 Heavy commercial vehicles and buses — TC 44 Welding and allied processes Vehicle dynamics simulation and validation — ISO/CD 6947 Welding and allied processes — Welding Steady-state circular driving behavior positions ISO/DTR Naturalistic Driving Studies — Defining and TC 91 Surface active agents 21974 Annotating — Safety Critical Events ISO/CD 4323 Soaps — Determination of chlorides content — TC 23 Tractors and machinery for agriculture Potentiometric method and forestry TC 94 Personal safety -- Protective clothing ISO/CD 12809 Crop protection equipment — Reciprocating and equipment positive displacement pumps and centrifugal ISO/CD Respiratory protective devices — Methods of pumps — Test methods 16900-1 test and test equipment — Part 1: Determina- ISO Machinery for forestry — General safety re- tion of inward leakage 11850:2011/ quirements — Amendment 2: Access to opera- ISO/CD Respiratory protective devices — Methods of CD Amd 2 tor's station and maintenance locations 16900-14 test and test equipment — Part 14: Measure- ISO/CD 22724 ISO 11850:2011 Machinery for forestry — ment of sound level General safety requirements Amd: Access to ISO/DTS Respiratory protective devices — Human fac- operator's station and maintenance locations 16976-3 tors — Part 3: Physiological responses and TC 27 Solid mineral fuels limitations of oxygen and limitations of carbon dioxide in the breathing environment

ISO Update, Supplement to ISO Focus -- September 2017 1 ISO/DTS Respiratory protective devices — Human fac- ISO/CD 21717 Intelligent transport systems — Partially 16976-4 tors — Part 4: Work of breathing and breathing automated in-lane driving systems (PADS) — resistance: Physiologically based limits Performance requirements and test procedures TC 106 Dentistry TC 206 Fine ceramics ISO/CD 4049 Dentistry — Polymer-based restorative ISO/CD Fine ceramics (advanced ceramics, advanced materials 21819-1 technical ceramics) — Characteristic of piezo- electric properties under high-load conditions TC 112 Vacuum technology — Part 1: Resonant-antiresonant method under ISO/DTS Vacuum technology — Vacuum gauges - Cali- high temperature conditions 20175 bration of quadrupole mass spectrometers for ISO/CD Fine ceramics (advanced ceramics, advanced partial pressure measurement 21819-2 technical ceramics) — Characteristic of piezo- ISO/DTS Vacuum technology - Vacuum gauges — electric properties under high-load conditions 20177 Procedures to measure and report outgassing — Part 2: Electrical transient response method rates with high vibration levels TC 121 Anaesthetic and respiratory equipment TC 212 Clinical laboratory testing and in vitro ISO/CD 8836 Suction catheters for use in the respiratory diagnostic test systems tract ISO/DTS Medical laboratories — Reduction of er- ISO/CD 11197 Medical supply units 22367 ror through risk management and continual improvement TC 123 Plain bearings TC 229 Nanotechnologies ISO/CD 22423 Foil bearings — Guideline for performance testing of foil thrust bearings — Testing of load ISO/DTR Nanotechnologies — Health and safety capacity, friction coefficient, and lifetime 12885 practices in occupational settings relevant to nanotechnologies TC 131 Fluid power systems TC 249 Traditional chinese medicine ISO/DTR Hydraulic fluid power — Gas-loaded accumu- 10946 lators with separator — Selection of preferred ISO/CD 21314 Traditional Chinese medicine — Salvia miltior- hydraulic ports rhiza root and rhizome TC 134 Fertilizers and soil conditioners ISO/CD 21316 Traditional Chinese medicine — Isatis indig- otica root ISO/CD 22018 Determination of available phosphorus content in inorganic fertilizers-EDTA extraction method ISO/DTR Traditional Chinese medicine — Controlled 23021 vocabulary on Japanese Kampo crude drugs TC 138 Plastics pipes, fittings and valves for ISO/DTR Traditional Chinese medicine — Controlled the transport of fluids 23022 vocabulary on Japanese Kampo formulas and ISO/CD 9624 Thermoplastics pipes for fluids under pressure the indication codes for the products — Mating dimensions of flange adapters and loose backing flanges TC 268 Sustainable cities and communities ISO/CD 37104 Sustainable development in communities — TC 146 Air quality Guidance for practical implementation in cities ISO/CD 22065 Workplace air — Procedures and requirements for measuring gases and vapours using pump TC 285 Clean cookstoves and clean cooking samplers solutions TC 158 Analysis of gases ISO/DTR Clean cookstoves and clean cooking solutions 21276 — Terms and definitions ISO/CD 21087 Hydrogen fuel — Analytical methods — Proton exchange membrane (PEM) fuel cell applica- TC 299 Robotics tions for road vehicles ISO/CD TR Robots and robotic devices — Safety require- TC 171 Document management applications 20218-1 ments for industrial robots — Part 1: Industrial robot system end of arm tooling (end-effector) ISO/DTR Document management — Guidelines for long 22299 term preservation file format TC 301 Energy management and energy savings ISO/CD 22550 Document management — AFP interchange set for graphics arts documents (AFP/GA) ISO/CD 50021 General guidelines for selecting energy savings evaluators ISO/DTR Document management — Analysis, selection 22957 and implementation of electronic document ISO/CD 50045 Technical guidelines for evaluation of energy management systems (EDMS) savings of thermal power plants TC 180 Solar energy JTC 1 Information technology ISO/CD Solar energy — Collector components and ma- ISO/IEC CD Software engineering — Guidelines for the 22975-5 terials — Part 5: Insulation material durability 90003 application of ISO 9001:2015 to computer and performance software TC 188 Small craft ISO/IEC PDTS Technical Specification — C++ Extensions for 21544 Modules ISO/CD 12216 Small craft — Windows, portlights, hatches, deadlights and doors — Strength and water- ISO/IEC Information technology — Generic coding tightness requirements 13818-1:2015/ of moving pictures and associated audio PDAM 10 information — Part 1: Systems — Amend- ISO/CD 15083 Small craft — Bilge-pumping systems ment 10: Carriage of timed metadata for media TC 204 Intelligent transport systems orchestration (MORE) and sample variants over MPEG-2 TS ISO/CD Intelligent transport systems — Commu- 17515-3 nications access for land mobiles (CALM) ISO/IEC Information technology — Generic coding of — Evolved universal terrestrial radio access 13818-1:2015/ moving pictures and associated audio informa- network (E-UTRAN) — Part 3: LTE-V2X PDAM 11 tion — Part 1: Systems — Amendment 11: Carriage of HEVC Tiles over MPEG-2 Systems

2 ISO Update, Supplement to ISO Focus -- September 2017 ISO/IEC Information technology — Coding of audio- 14496-3:2009/ visual objects — Part 3: Audio — Amendment Period from 01 August to 31 August 2017 PDAM 7 7: SBR Enhancements These documents have obtained substantial support within the ap- ISO/IEC Information technology — Coding of audio- propriate ISO technical committee. 14496-5:2001/ visual objects — Part 5: Reference software PDAM 43 — Amendment 43: New levels of ALS simple They have been submitted to the ISO member bodies for voting by profile the date shown. ISO/IEC CD Information technology — Coding of audio- * Available in English only 14496-22 visual objects — Part 22: Open Font Format ISO/IEC Information technology — Coding of audio- 14496- visual objects — Part 26: Audio conformance Vote 26:2010/PDAM — Amendment 5: Conformance for new levels terminates 5 of ALS simple profile ISO/IEC Information technology — Multimedia applica- COPOLCO Committee on consumer 23000-19/ tion format (MPEG-A) — Part 19: Common me- policy PDAM 2 dia application format (CMAF) for segmented media — Amendment 2: XHE-AAC and other ISO/IEC Packaging — Recommendations media profiles DGuide 41 for addressing consumer needs 2017-12-09 ISO/IEC CD Information technology — Multimedia applica- 23000-21 tion format (MPEG-A) — Part 21: Visual identity (Revision of ISO/IEC Guide management application format 41:2003) ISO/IEC CD Information technology — Multimedia applica- PC 302 Guidelines for auditing 23000-22 tion format (MPEG-A) — Part 22: Multi-Image management systems Application Format (MiAF) ISO/DIS 19011 * Guidelines for auditing manage- ISO/IEC CD Information technology — MPEG systems ment systems 23001-12 technologies — Part 12: Sample Variants in the 2017-10-26 ISO base media file format

ISO/IEC CD Information technology — MPEG systems (Revision of ISO 19011:2011) 23001-14 technologies — Part 14: Partial file format TC 8 Ships and marine ISO/IEC Information technology — MPEG audio tech- technology 23003-3:2012/ nologies — Part 3: Unified speech and audio PDAM 4 coding — Amendment 4: USAC configuration ISO/DIS * Ships and marine technology extensions: Stream ID and FF groups 24409-2 — Design, location and use of shipboard safety signs, fire 2017-11-13 ISO/IEC Information technology — MPEG audio tech- control plan signs, safety notices 23003-4:2015/ nologies — Part 4: Dynamic Range Control — and safety markings — Part 2: PDAM 4 Amendment 4: Profiles and levels Catalogue of shipboard safety ISO/IEC Information technology — High efficiency signs and fire control plan signs 23008-1:2017/ coding and media delivery in heterogeneous (Revision of ISO 24409-2:2014) PDAM 3 environments — Part 1: MPEG media transport ISO/DIS * Ships and marine technology (MMT) — Amendment 3: Immersive media and 17325-3 — Marine environment protec- CDN integration tion — Oil booms — Part 3: End 2017-11-06 ISO/IEC Information technology — High efficiency connectors 23008-3:2015/ coding and media delivery in heterogeneous ISO/DIS 8384 * Ships and marine technology — PDAM 5 environments — Part 3: 3D audio — Amend- Dredgers — Vocabulary ment 5: Audio metadata enhancements 2017-11-22 ISO/IEC Information technology — High efficiency 23008- coding and media delivery in heterogene- (Revision of ISO 8384:2000) 10:2015/PDAM ous environments — Part 10: MPEG media ISO/DIS 8385 * Ships and marine technology — 1 transport forward error correction (FEC) codes Dredgers — Classification — Amendment 1: Additional FEC codes 2017-11-22 ISO/IEC CD Information technology — Coding-independent 23091-4 code points — Part 4: Usage of video signal (Revision of ISO 8385:1999) type code points TC 17 Steel ISO/IEC Information technology — JPSearch — Part 6: ISO/DIS 643 * Steels — Micrographic determi- 24800-6:2012/ Reference software — Amendment 1: Refer- nation of the apparent grain size PDAM 1 ence software for JPSearch and JPOnto 2017-11-21 ISO/IEC Information technology — JPEG XR im- 29199-2:2012/ age coding system — Part 2: Image coding (Revision of ISO 643:2012) PDAM 2 specification — Amendment 2: Media type ISO/DIS 4986 * Steel castings — Magnetic parti- specification cle inspection ISO/IEC PDTR Information technology — Data centres — Ex- 2017-10-26 23050 cess electrical energy XEEF (Revision of ISO 4986:2010) ISO/DIS 4960 * Steel strip, cold-reduced with a mass fraction of carbon over 0,25% 2017-11-07

(Revision of ISO 4960:2007) DIS circulated

ISO Update, Supplement to ISO Focus -- September 2017 3 ISO/DIS 5952 * Steel sheet, hot-rolled, of ISO/DIS * Aerospace elements of electrical structural quality with improved 2100-411 and optical connection — Test atmospheric corrosion resistance 2017-11-06 methods — Part 411: Insert 2017-10-26 retention in housing (torsional) (Revision of ISO 5952:2011) (Revision of ISO 2100:1987) TC 20 Aircraft and space vehicles ISO/DIS * Aerospace elements of electrical 2100-412 and optical connection — Test ISO/DIS * Aerospace elements of electrical methods — Part 412: Contact 2017-10-26 2100-321 and optical connection — Test insertion and extraction forces in methods — Part 321: Damp and out of insert heat, cyclic test (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-413 and optical connection — Test 2100-323 and optical connection — Test methods — Part 413: Holding 2017-10-26 methods — Part 323: Thermal force of grounding spring system shock (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electri- 2100-414 and optical connection — Test 2100-325 cal and optical connection — methods — Part 414: Unmating 2017-10-26 Test methods — Part 325: Ice of lanyard release connectors resistance (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-415 and optical connection — Test 2100-401 and optical connection — Test methods — Part 415: Test probe 2017-10-26 methods — Part 401: Accelera- 2017-10-25 damage (female contact) tion, steady state (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-416 and optical connection — Test 2100-402 and optical connection — Test methods — Part 416: Contact 2017-10-26 methods — Part 402: Shock 2017-10-25 bending strength

(Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-417 and optical connection — Test 2100-403 and optical connection — Test methods — Part 417: Tensile 2017-10-26 methods — Part 403: Sinusoidal 2017-10-25 strength (crimped connection) and random vibration (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-418 and optical connection — Test 2100-404 and optical connection — Test methods — Part 418: Gauge 2017-10-26 methods — Part 404: Transverse 2017-10-25 insertion and extraction forces in load and out of female contact (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-405 and optical connection — Test 2100-419 and optical connection — Test methods — Part 405: Axial load 2017-10-25 methods — Part 419: Stability of 2017-10-26

male contacts in insert (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-406 and optical connection — Test 2100-420 and optical connection — Test methods — Part 406: Mechani- 2017-10-25 methods — Part 420: Mechani- 2017-10-27 cal endurance cal strength of rear accessories (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-407 and optical connection — Test 2100-421 and optical connection — Test methods — Part 407: Durability 2017-10-25 methods — Part 421: Free fall 2017-10-27 of contact retention system and

seals (Maintenance ageing) (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-422 and optical connection — Test 2100-408 and optical connection — Test methods — Part 422: Locking 2017-10-27 methods — Part 408: Mating 2017-10-25 wire hole strength and unmating forces (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-424 and optical connection — Test 2100-409 and optical connection — Test methods — Part 424: Strip- 2017-10-27 methods — Part 409: Contact 2017-10-25 ping force, solderless wrapped retention in insert connections (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-410 and optical connection — Test 2100-425 and optical connection — Test methods — Part 410: Insert 2017-10-26 methods — Part 425: Unwrap- 2017-10-27 retention in housing (axial) ping, solderless wrapped (Revision of ISO 2100:1987) connections (Revision of ISO 2100:1987)

4 ISO Update, Supplement to ISO Focus -- September 2017 ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-426 and optical connection — Test 2100-514 and optical connection — Test methods — Part 426: Contact 2017-10-27 methods — Part 514: Soldera- 2017-11-02 retention system effectiveness bility of contacts with self-con- (removable contact walkout) tained solder and flux (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of elec- ISO/DIS * Aerospace elements of electrical 2100-427 trical and optical connection 2100-601 and optical connection — Test — Test methods — Part 427: 2017-10-27 methods — Part 601: Optical 2017-11-03 Robustness of protective cover elements — Insertion loss attachment (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-602 and optical connection — Test 2100-428 and optical connection — Test methods — Part 602: Optical 2017-11-03 methods — Part 428: Sinusoidal 2017-10-27 elements — Variation of attenua- vibrations with passage of cur- tion and optical discontinuity rent for crimped terminal lugs (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electri- 2100-603 and optical connection — Test 2100-501 cal and optical connection — methods — Part 603: Change of 2017-11-03 Test methods — Part 501: Soft 2017-11-02 power distribution solderability (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-604 and optical connection — Test 2100-502 and optical connection — Test methods — Part 604: Optical 2017-11-03 methods — Part 502: Restricted 2017-11-02 elements — Cleaning capability entry of optical face (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-503 and optical connection — Test 2100-605 and optical connection — Test methods — Part 503: Contact 2017-11-02 methods — Part 605: Optical 2017-11-03 deformation after crimping elements — Return loss (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-505 and optical connection — Test 2100-606 and optical connection — Test methods — Part 505: Contact 2017-11-02 methods — Part 606: Optical 2017-11-03 protection effectiveness (soop elements — Crosstalk proof) (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-607 and optical connection — Test 2100-506 and optical connection — Test methods — Part 607: Optical 2017-11-03 methods — Part 506: Use of 2017-11-02 elements — Immunity to ambient tools light coupling (Revision of ISO 2100:1987) (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-507 and optical connection — Test 2100-609 and optical connection — Test methods — Part 507: Plating 2017-11-02 methods — Part 609: Optical 2017-11-03 porosity elements — Effectiveness of ca- (Revision of ISO 2100:1987) ble attachment — Cable cycling flexing ISO/DIS * Aerospace elements of electrical (Revision of ISO 2100:1987) 2100-508 and optical connection — Test methods — Part 508: Measure- 2017-11-02 ISO/DIS * Aerospace elements of electrical ment of thickness of coating on 2100-610 and optical connection — Test contacts methods — Part 610: Optical el- 2017-11-03 (Revision of ISO 2100:1987) ements — Effectiveness of cable attachment — Cable pulling ISO/DIS * Aerospace elements of electrical (Revision of ISO 2100:1987) 2100-509 and optical connection — Test methods — Part 509: Adhesion 2017-11-02 ISO/DIS * Aerospace elements of electrical of coating on contacts 2100-611 and optical connection — Test (Revision of ISO 2100:1987) methods — Part 611: Optical el- 2017-11-03 ements — Effectiveness of cable ISO/DIS * Aerospace elements of electrical attachment — Cable torsion 2100-512 and optical connection — Test (Revision of ISO 2100:1987) methods — Part 512: Effective- 2017-11-02 ness of non-removable fixing of ISO/DIS * Aerospace elements of electrical hermetically sealed connector 2100-612 and optical connection — Test shell methods — Part 612: Optical 2017-11-03 (Revision of ISO 2100:1987) elements — Effectiveness of cable attachment — Cable axial ISO/DIS * Aerospace elements of electrical compression 2100-513 and optical connection — Test (Revision of ISO 2100:1987) methods — Part 513: Magnetic 2017-11-02 permeability ISO/DIS * Aerospace elements of electrical (Revision of ISO 2100:1987) 2100-613 and optical connection — Test methods — Part 613: Optical 2017-11-03 elements — Impact test

ISO Update, Supplement to ISO Focus -- September 2017 5 (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS * Aerospace elements of electrical 2100-6415 and optical connection — Test 2100-614 and optical connection — Test methods — Part 6415: Optical 2017-10-26 methods — Part 614: Optical 2017-11-03 elements — Test probe damage elements — Connector radial (Revision of ISO 2100:1987) compression ISO/DIS 9206 * Aerospace — Fixed displace- (Revision of ISO 2100:1987) ment hydraulic motors — Gen- ISO/DIS * Aerospace elements of electrical eral specifications 2017-11-02 2100-615 and optical connection — Test methods — Part 615: Optical 2017-11-03 (Revision of ISO 9206:2016) elements — Connection integrity ISO/DIS 10794 * Space systems — Programme at temperature management — Material, me- (Revision of ISO 2100:1987) chanical parts and processes 2017-11-02 ISO/DIS * Aerospace elements of electrical 2100-617 and optical connection — Test (Revision of ISO 10794:2011) methods — Part 617: Optical 2017-11-03 ISO/DIS * Space systems — Safety elements — Temperature cycling 14620-1 requirements — Part 1: System (Revision of ISO 2100:1987) safety 2017-10-26 ISO/DIS * Aerospace elements of electrical 2100-6321 and optical connection — Test (Revision of ISO 14620-1:2002) methods — Part 6321: Optical TC 21 Equipment for fire protec- elements — Damp heat cyclic test tion and fire fighting (Revision of ISO 2100:1987) ISO/DIS * Fire detection and alarm systems ISO/DIS * Aerospace elements of electrical 7240-7 — Part 7: Point-type smoke 2100-6323 and optical connection — Test detectors using scattered light, 2017-11-02 methods — Part 6323: Optical transmitted light or ionization elements — Thermal shock (Her- (Revision of ISO 7240-7:2011) metically sealed devices) ISO/DIS * Smoke and heat control systems (Revision of ISO 2100:1987) 21927-4 — Part 4: Natural smoke and ISO/DIS * Aerospace elements of electrical heat exhaust ventilators; design, 2017-11-07 2100-6324 and optical connection — Test requirements and installation methods — Part 6324: Optical ISO/DIS * Smoke and heat control sys- elements — Interfacial sealing 21927-5 tems — Part 5: Powered smoke (Revision of ISO 2100:1987) exhaust systems; requirements 2017-11-07 ISO/DIS * Aerospace elements of electrical and design 2100-6401 and optical connection — Test TC 22 Road vehicles methods — Part 6401: Optical 2017-10-25 ISO/DIS Road vehicles — Functional elements — Acceleration steady 26262-10.2 safety — Part 10: Guidelines on state ISO 26262 2017-10-07 (Revision of ISO 2100:1987)

ISO/DIS * Aerospace elements of electrical (Revision of ISO 26262-10:2012) 2100-6402 and optical connection — Test ISO/DIS 17373 * Road vehicles — Sled test pro- methods — Part 6402: Optical 2017-10-25 cedure for evaluating occupant elements — Shock head and neck interactions with 2017-11-02 (Revision of ISO 2100:1987) seat/head restraint designs in ISO/DIS * Aerospace elements of electrical low-speed rear-end impact 2100-6403 and optical connection — Test (Revision of ISO 17373:2005) methods — Part 6403: Optical 2017-10-25 ISO * Impact test procedures for road elements — Vibrations 17949:2013/ vehicles — Seating and position- (Revision of ISO 2100:1987) DAmd 2 ing procedures for anthropomor- 2017-11-20 ISO/DIS * Aerospace elements of electrical phic test devices — Procedure 2100-6404 and optical connection — Test for the WorldSID 5Oth percentile methods — Part 6404: Optical 2017-10-25 male side-impact dummy in front elements — Transverse load outboard seating positions — (Revision of ISO 2100:1987) Amendment 2 ISO/DIS * Aerospace elements of electrical ISO/DIS 20762 * Electrically propelled road vehi- 2100-6405 and optical connection — Test cles — Determination of power methods — Part 6405: Optical 2017-10-25 for propulsion of hybrid electric 2017-11-14 elements — Axial load vehicle (Revision of ISO 2100:1987) TC 23 Tractors and machinery for ISO/DIS * Aerospace elements of electrical agriculture and forestry 2100-6406 and optical connection — Test methods — Part 6406: Opti- 2017-10-25 ISO/DIS * Agricultural machinery — Safety cal elements — Mechanical 4254-16 — Part 16: Portable agricultural endurance grain augers 2017-11-16 (Revision of ISO 2100:1987) ISO/DIS * Aerospace elements of electrical ISO/DIS 10517 * Powered hand-held hedge trim- 2100-6414 and optical connection — Test mers — Safety methods — Part 6414: Optical 2017-10-26 2017-10-26 elements — Unmating of lanyard release optical connection (Revision of ISO 10517:2009, elements ISO 10517:2009/Amd 1:2013) (Revision of ISO 2100:1987) TC 34 Food products

6 ISO Update, Supplement to ISO Focus -- September 2017 ISO/DIS 20377 * Spices, culinary herbs and ISO/DIS * Welding — Welding of reinforcing condiments — Dried pars- 17660-2 steel — Part 2: Non load-bearing ley (Petroselium Crispum) 2017-10-27 welded joints 2017-11-20 — Specification TC 35 Paints and varnishes (Revision of ISO 17660-2:2006) ISO/DIS * Paints and varnishes — Determi- TC 58 Gas cylinders 2812-2 nation of resistance to liquids — ISO/DIS 10460 * Gas cylinders — Welded alumin- Part 2: Water immersion method 2017-10-25 ium-alloy, carbon and stainless steel gas cylinders — Periodic 2017-11-16 (Revision of ISO 2812-2:2007) inspection and testing ISO/DIS 20266 * Paints and varnishes — Deter- (Revision of ISO 10460:2005) mination of image clarity (degree TC 61 Plastics of sharpness of reflected or 2017-11-07 ISO/DIS 17422 * Plastics — Environmental as- transmitted image) pects — General guidelines for TC 38 Textiles their inclusion in standards 2017-10-26 ISO/DIS * Textiles — Quantitative chemical 1833-6 analysis — Part 6: Mixtures of (Revision of ISO 17422:2002) viscose, certain types of cupr, 2017-11-08 TC 67 Materials, equipment and modal or lyocell with certain offshore structures for pe- other fibres (method using formic troleum, petrochemical and acid and zinc chloride) natural gas industries (Revision of ISO 1833-6:2007) ISO/DIS 19277 * Petroleum, petrochemical and ISO/DIS * Textiles - Quantitative chemical natural gas industries — Quali- 1833-27 analysis — Part 27: Mixtures of fication testing and acceptance 2017-11-16 cellulose fibres with certain other 2017-11-03 criteria for protective coating fibres (method using aluminium systems under insulation sulfate) ISO/DIS 11961 * Petroleum and natural gas indus- ISO/DIS 18184 * Textiles — Determination of anti- tries — Steel drill pipe viral activity of textile products 2017-11-21 2017-11-07

(Revision of ISO 11961:2008, (Revision of ISO 18184:2014) ISO 11961:2008/Cor 1:2009) ISO/DIS 20158 * Textiles — Determination of wa- ISO/DIS 19903 * Petroleum and natural gas ter absorbency of textile fabrics industries — Concrete offshore 2017-11-22 structures 2017-11-09

TC 42 Photography (Revision of ISO 19903:2006) ISO/DIS 18944 * Imaging materials — Reflec- ISO/DIS 19906 * Petroleum and natural gas indus- tion colour photographic prints tries — Arctic offshore structures — Test print construction and 2017-11-21 2017-11-21 measurement (Revision of ISO 18944:2014) (Revision of ISO 19906:2010) TC 43 Acoustics TC 79 Light metals and their ISO/DIS * Acoustics — Noise from shoot- alloys 17201-1 ing ranges — Part 1: Deter- ISO/DIS 8251 * Anodizing of aluminium and mination of muzzle blast by 2017-11-08 its alloys — Measurement of measurement abrasion resistance of anodic 2017-11-14 (Revision of ISO 17201-1:2005, oxidation coatings ISO 17201-1:2005/Cor 1:2009) (Revision of ISO 8251:2011) ISO/DIS * Acoustics — Field measurement TC 87 Cork 16283-2 of sound insulation in buildings and of building elements — Part 2017-11-20 ISO/DIS 633 * Cork — Vocabulary 2: Impact sound insulation (Revision of ISO 16283-2:2015) 2017-11-21

TC 44 Welding and allied (Revision of ISO 633:2007) processes TC 92 Fire safety ISO/DIS 2401 * Welding consumables — Cov- ISO/DIS * Fire resistance tests — Fire ered electrodes — Determination 21925-1 dampers for air distribution of the efficiency, metal recovery 2017-11-07 systems — Part 1: Mechanical and deposition coefficient dampers (Revision of ISO 2401:1972) (Revision of ISO 10294-1:1996, ISO/DIS 5171 * Gas welding equipment — Pres- ISO 10294-4:2001) sure gauges used in welding, ISO/DIS * Fire safety engineering — Per- cutting and allied processes 2017-11-08 24679-1 formance of structures in fire —

Part 1: General 2017-11-13 (Revision of ISO 5171:2009)

ISO/DIS * Welding — Welding of reinforc- (Revision of ISO/TS 24679:2011) 17660-1 ing steel — Part 1: Load-bearing TC 94 Personal safety -- Pro- welded joints 2017-11-20 tective clothing and (Revision of ISO 17660-1:2006) equipment

ISO Update, Supplement to ISO Focus -- September 2017 7 ISO/DIS 4007 * Personal protective equip- ISO/DIS * Plastics piping systems for non- ment — Eye and face protection 21138-2 pressure underground drainage — Vocabulary 2017-11-03 and sewerage — Structured-wall 2017-11-03 piping systems of unplasticized (Revision of ISO 4007:2012) poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyeth- TC 108 Mechanical vibration, ylene (PE) — Part 2: Pipes and shock and condition fittings with smooth external monitoring surface, Type A ISO/DIS * Mechanical vibration and shock (Revision of ISO 21138-2:2007) 2631-5 — Evaluation of human exposure ISO/DIS * Plastics piping systems for non- to whole-body vibration — Part 2017-10-31 21138-3 pressure underground drainage 5: Method for evaluation of and sewerage — Structured-wall 2017-11-03 vibration containing multiple piping systems of unplasticized shocks poly(vinyl chloride) (PVC-U), (Revision of ISO 2631-5:2004) polypropylene (PP) and polyeth- ISO * Mechanical vibration and shock ylene (PE) — Part 3: Pipes and 10819:2013/ — Hand-arm vibration — Meas- fittings with non-smooth external DAmd 1 urement and evaluation of the 2017-11-20 surface, Type B vibration transmissibility of (Revision of ISO 21138-3:2007) gloves at the palm of the hand — ISO/DIS 8483 * Glass-reinforced thermosetting Amendment 1 plastics (GRP) pipes and fittings TC 113 Hydrometry — Test methods to prove the 2017-11-02 design of bolted flange joints ISO/DIS 1070 * Hydrometry — Slope — Area (Revision of ISO 8483:2003, ISO Method 8483:2003/Amd 1:2012) 2017-11-01 ISO/DIS 8533 * Glass-reinforced thermosetting (Revision of ISO 1070:1992, ISO plastics (GRP) pipes and fittings 1070:1992/Amd 1:1997) — Test method to prove the 2017-11-06 design of cemented or wrapped TC 121 Anaesthetic and respiratory joints equipment (Revision of ISO 8533:2003, ISO ISO/DIS 17256 * Anaesthetic and respira- 8533:2003/Amd 1:2012) tory equipment — Respiratory TC 142 Cleaning equipment for air therapy tubing and connectors 2017-10-31 and other gases

ISO/DIS * Test method to measure the ISO/DIS 19211 * Anaesthetic and respiratory 21083-1 efficiency of air filtration media equipment — Fire-activated against spherical nanomateri- 2017-10-27 oxygen shut-off devices for use 2017-10-31 als — Part 1: Particle size range during oxygen therapy from 20 nm to 500 nm TC 131 Fluid power systems TC 146 Air quality ISO 3601- * Fluid power systems — O-rings ISO/DIS * Meteorology — Weather radar — 3:2005/DAmd — Part 3: Quality acceptance 19926-1 Part 1: System performance and 1 criteria — Amendment 1 2017-11-07 operation.

ISO/DIS * Indoor air — Part 36: Standard ISO 16589- * Rotary shaft lip-type seals incor- 16000-36 method for assessing the reduc- 1:2011/DAmd porating thermoplastic sealing tion rate of culturable airborne 2017-11-02 1 elements — Part 1: Nominal 2017-10-27 bacteria by air purifiers using a dimensions and tolerances — test chamber Amendment 1 TC 150 Implants for surgery ISO/DIS 4409 * Hydraulic fluid power — Pos- itive-displacement pumps, ISO/DIS 13019 * Tissue-engineered medical prod- motors and integral transmis- 2017-11-02 ucts — Quantification of sulfated sions — Methods of testing and glycosaminoglycans (sGAG) for 2017-10-26 presenting basic steady state evaluation of chondrogenesis performance TC 160 Glass in building (Revision of ISO 4409:2007) ISO/DIS * Glass in building — Vacuum TC 134 Fertilizers and soil 19916-1 inulating glass — Part 1: Basic conditioners specification of products 2017-11-13 ISO/DIS 19822 * Fertilizers and soil conditioners and evaluation methods for — Determination of humic and thermal and sound insulating hydrophobic fulvic acids concen- performance trations in fertilizer materials TC 164 Mechanical testing of TC 138 Plastics pipes, fittings and metals valves for the transport of ISO/DIS 12108 * Metallic materials — Fatigue fluids testing — Fatigue crack growth method 2017-11-13

(Revision of ISO 12108:2012) TC 184 Automation systems and integration

8 ISO Update, Supplement to ISO Focus -- September 2017 ISO/DIS * Data quality — Part 62: Data ISO/DIS * Surface chemical analysis — 8000-62 quality management: Organiza- 20579-4 Guidelines to sample handling, tional process maturity assess- 2017-11-14 preparation and mounting — ment: Application of the ISO/IEC Part 4: Reporting information 330xx family of standards related to the history, prepara- tion, handling and mounting of ISO/DIS * Data quality — Part 115: Master nano-objects prior to surface 8000-115 data: Exchange of quality identi- analysis fiers: Syntactic, semantic and resolution requirements TC 204 Intelligent transport ISO/DIS * Industrial automation systems systems 10303-57 and integration — Product data ISO/DIS * Intelligent transport systems — representation and exchange 2017-11-02 14813-5 Reference model architecture(s) — Part 57: Integrated generic for the ITS sector — Part 5: 2017-11-13 resource: Persistent identifica- Requirements for architecture tion of elements in procedural description in ITS standards shape modelling (Revision of ISO 14813-5:2010) TC 188 Small craft ISO * Road transport and traffic ISO/DIS * Small craft — Hull construc- 14816:2005/ telematics — Automatic vehicle 12215-5 tion and scantlings — Part 5: DAmd 1 and equipment identification — 2017-11-02 Design pressures for monohulls, 2017-10-27 Numbering and data structure — design stresses, scantlings Amendment 1 determination ISO/DIS Transport Information and con- (Revision of ISO 12215-5:2008, 14827-3.2 trol systems — Data interfaces ISO 12215-5:2008/Amd 1:2014) between centres for transport in- 2017-10-06 TC 192 Gas turbines formation and control systems — Part 3: Data interfaces between ISO/DIS 10494 * Turbines and turbine sets centres for intelligent transport — Measurement of emitted sytems (ITS) using XML airborne noise — Engineering/ 2017-11-07 survey method ISO/DIS 14906 * Electronic fee collection — (Revision of ISO 10494:1993) Application interface defini- tion for dedicated short-range 2017-11-14 TC 198 Sterilization of health care communication products (Revision of ISO 14906:2011, ISO 14906:2011/Cor 1:2013, ISO ISO Sterilization of health-care prod- 14906:2011/Amd 1:2015) 11135:2014/ ucts — Ethylene oxide — Re- DAmd 1 quirements for the development, 2017-10-31 ISO/DIS 15622 * Intelligent transport systems — validation and routine control Adaptive cruise control systems of a sterilization process for — Performance requirements 2017-11-13 medical devices — Amendment and test procedures 1: Revision of Annex E, Single (Revision of ISO 15622:2010) batch release ISO/DIS * Intelligent transport systems ISO 11137- * Sterilization of health care 15638-21 — Framework for cooperative 1:2006/DAmd products — Radiation — Part 1: telematics applications for regu- 2017-11-02 2 Requirements for development, lated commercial freight vehicles validation and routine control of (TARV) — Part 21: Monitoring of a sterilization process for medi- regulated vehicles using road- cal devices — Amendment 2: . side sensors and data collected from the vehicle for enforcement ISO/DIS * Sterilization of health care and other purposes 11138-7 products — Biological indica- tors — Part 7: Guidance for the ISO * Intelligent transport systems — selection, use and interpretation 17262:2012/ Automatic vehicle and equip- of results DAmd 1 ment identification — Numbering 2017-11-02 and data structures — Amend- ISO/DIS 11139 * Sterilization of health care ment 1 products — Vocabulary — Terms used in sterilization and 2017-11-09 ISO * Intelligent transport systems — related equipment and process 17264:2009/ Automatic vehicle and equip- standards DAmd 1 ment identification — Interfaces 2017-11-02 (Revision of ISO/TS 11139:2006) — Amendment 1 TC 201 Surface chemical analysis ISO 24534- * Automatic vehicle and equip- 4:2010/DAmd ment identification — Electronic ISO/DIS * Surface chemical analysis — 1 registration identification (ERI) for 2017-11-02 20579-1 Guidelines to sample handling, vehicles — Part 4: Secure com- preparation and mounting — munications using asymmetrical Part 1: Guidelines to handling of techniques — Amendment 1 specimens prior to analysis (Revision of ISO 18116:2005, ISO 24534- * Intelligent transport systems — ISO 18117:2009) 5:2011/DAmd Automatic vehicle and equip- 1 ment identification — Electronic 2017-11-02 ISO/DIS * Surface chemical analysis — Registration Identification (ERI) 20579-2 Guidelines to sample handling, for vehicles — Part 5: Secure preparation and mounting — communications using sym- Part 2: Guidelines to preparation metrical techniques — Amend- and mounting of specimens prior ment 1 to analysis (Revision of ISO 18117:2009)

ISO Update, Supplement to ISO Focus -- September 2017 9 ISO/DIS * Intelligent transport systems ISO/DIS 50001 * Energy management systems 29281-1 — Localized communications — Requirements with guidance — Part 1: Fast networking & 2017-11-13 for use 2017-11-14 transport layer protocol (FNTP) (Revision of ISO 29281-1:2013, (Revision of ISO 50001:2011) ISO 29281-1:2013/Amd 1:2017) ISO/DIS 50046 * General quantification methods TC 206 Fine ceramics for ex ante or expected energy savings 2017-11-16 ISO/DIS 19604 * Fine ceramics (advanced

ceramics, advanced technical ceramics) - Mechanical proper- 2017-11-08 IULTCS International Union of ties of ceramic composites at Leather Technologists and high temperature - Determination Chemists Societies of stress-rupture time diagram under constant tensile loading ISO/DIS * Leather — Chemical determina- 5398-1 tion of chromic oxide content — ISO/DIS 21113 * Fine ceramics (advanced ceram- Part 1: Quantification by titration 2017-10-25 ics, advanced technical ceram- ics) — Test method for fracture 2017-11-15 (Revision of ISO 5398-1:2007) toughness of monolithic ceramic thin plates at room temperature ISO/DIS * Leather — Chemical determina- 5398-4 tion of chromic oxide content TC 211 Geographic information/ — Part 4: Quantification by 2017-10-25 Geomatics inductively coupled plasma (ICP) ISO/DIS 19107 * Geographic information — Spa- (Revision of ISO 5398-4:2007) tial schema ISO/DIS * Leather — Chemical determina- 2017-11-15 17072-1 tion of metal content — Part 1: Extractable metals 2017-10-31 (Revision of ISO 19107:2003) ISO/DIS 19146 * Geographic information — (Revision of ISO 17072-1:2011) Cross-domain vocabularies ISO/DIS * Leather — Chemical determina- 2017-11-21 17072-2 tion of metal content — Part 2: Total metal content 2017-10-31 (Revision of ISO 19146:2010) TC 228 Tourism and related (Revision of ISO 17072-2:2011) services JTC 1 Information technology ISO/DIS 20611 * Adventure tourism — Sustaina- ISO/IEC/IEEE * Systems and software engineer- bility good practices — Require- DIS 24748-2 ing — Life cycle management ments and recommendations 2017-10-31 — Part 2: Guidelines to the ap- 2017-10-13 plication of ISO/IEC/IEEE 15288 (System life cycle processes) TC 249 Traditional chinese (Revision of ISO/IEC TR medicine 24748-2:2011) ISO/DIS 21317 * Traditional Chinese medicine — ISO/IEC/IEEE * Systems and software engineer- Lonicera japonica flower DIS 26511 ing — Requirements for manag- ers of information for users of 2017-11-07 TC 269 Railway applications systems, software, and services (Revision of ISO/IEC/IEEE ISO/DIS 21106 * Railway applications — Recycla- 26511:2011) bility and recoverability calcula- tion method of rolling stock 2017-11-14 ISO/IEC * Information technology — Data 30134-2:2016/ centres — Key performance in- DAmd 1 dicators — Part 2: Power usage 2017-11-13 TC 270 Plastics and rubber effectiveness (PUE) — Amend- machines ment 1 ISO/DIS Plastics and rubber machines — ISO/IEC * Information technology — Data 20430.2 Injection moulding machines — 30134-3:2016/ centres — Key performance Safety requirements 2017-10-22 DAmd 1 indicators — Part 3: Renewable 2017-11-13 energy factor (REF) — Amend- TC 272 Forensic sciences ment 1

ISO/DIS * Forensic Sciences — Part 1: 21043-1 Terms, definitions and framework 2017-11-06

ISO/DIS * Forensic sciences — Part 2: 21043-2 Recognition, recording, recover- ing, transport and storage of 2017-11-06 material FDIS circulated TC 274 Light and lighting

ISO/CIE DIS * Light and lighting — Energy per- Period from 01 August to 31 August 2017 20086 formance of lighting in buildings 2017-11-09 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown TC 301 Energy management and * Available in English only energy savings

10 ISO Update, Supplement to ISO Focus -- September 2017 (Revision of ISO 23038:2006) Vote TC 21 Equipment for fire protec- terminates tion and fire fighting

ISO/FDIS 8201 * Acoustics — Audible and other TC 4 Rolling bearings emergency evacuation signals ISO/FDIS * Rolling bearings — Load ratings 2017-10-06 20056-2 for hybrid bearings with rolling elements made of ceramic — 2017-10-10 (Revision of ISO 8201:1987) Part 2: Static load ratings TC 22 Road vehicles TC 6 Paper, board and pulps ISO/FDIS * Road Vehicles — Extended vehi- ISO/FDIS 4094 * Paper, board and pulps — Gen- 20077-2 cle (ExVe) methodology eral requirements for the compe- — Part 2: Methodology for de- 2017-11-02 tence of laboratories authorized 2017-10-21 signing the extended vehicle for the issue of optical reference ISO/FDIS * Heavy commercial vehicles and transfer standards of level 3 19377.2 buses — Emergency braking on (Revision of ISO 4094:2005) a defined path — Test method 2017-10-24 TC 8 Ships and marine for trajectory measurement technology TC 23 Tractors and machinery for ISO/FDIS * Ships and marine technology — agriculture and forestry 18079-1 Servicing of inflatable life-saving ISO/FDIS * Agricultural machinery and trac- appliances — Part 1: General 2017-10-24 18497 tors — Safety of highly automat- ed agricultural machines 2017-10-21 ISO/FDIS * Ships and marine technology — 18079-2 Servicing of inflatable life-saving ISO 5395- * Garden equipment — Safety appliances — Part 2: Inflatable 2017-10-24 3:2013/FDAmd requirements for combustion- life rafts 2.2 engine-powered lawnmowers 2017-10-17 ISO/FDIS * Ships and marine technology — — Part 3: Ride-on lawnmowers 18079-3 Servicing of inflatable life-saving with seated operator — Amend- appliances — Part 3: Inflatable 2017-10-24 ment 2: Cutting means enclosure lifejackets guards ISO/FDIS * Ships and marine technology — TC 27 Solid mineral fuels 18079-4 Servicing of inflatable life-saving ISO/FDIS * Solid mineral fuels — Guidelines appliances — Part 4: Marine 2017-10-24 11726 for the validation of alternative evacuation systems methods of analysis 2017-10-07 ISO/FDIS * Ships and marine technology — 18079-5 Servicing of inflatable life-saving (Revision of ISO 11726:2004) appliances — Part 5: Inflated 2017-10-24 TC 28 Petroleum and related rescue boats products, fuels and lu- TC 10 Technical product bricants from natural or documentation synthetic sources ISO/FDIS * Ball point pens and refills — Part ISO/FDIS * Petroleum and related products 12757-1 1: General use 4259-1 — Precision of measurement 2017-10-21 methods and results — Part 1: Determination of precision data (Revision of ISO 12757-1:2016) in relation to methods of test ISO/FDIS * Roller ball pens and refills — Part (Revision of ISO 4259:2006) 14145-1 1: General use ISO/FDIS * Petroleum and related products 2017-10-21 4259-2 — Precision of measurement methods and results — Part 2: (Revision of ISO 14145-1:2016) Interpretation and application ISO/FDIS * Gel ink ball pens and refills — of precision data in relation to 27668-1 Part 1: General use methods of test 2017-10-21 (Revision of ISO 4259:2006) ISO/FDIS 5165 * Petroleum products — Deter- (Revision of ISO 27668-1:2016) mination of the ignition quality TC 17 Steel of diesel fuels — Cetane engine method ISO/FDIS 3887 * Steels — Determination of the (Revision of ISO 5165:1998) depth of decarburization 2017-10-21 TC 34 Food products ISO/FDIS Foodstuffs — Determination of (Revision of ISO 3887:2003) 18787 water activity TC 20 Aircraft and space vehicles ISO/FDIS * Sensory analysis — Methodol- ISO/FDIS * Space systems — Guidelines 10399 ogy — Duo-trio test 18676 for the management of systems 2017-11-10 engineering 2017-10-19

(Revision of ISO 10399:2004) ISO/FDIS * Space systems — Space solar ISO/FDIS 2292 Cocoa beans — Sampling 23038 cells — Electron and proton ir-

radiation test methods 2017-10-17 2017-10-07

ISO Update, Supplement to ISO Focus -- September 2017 11 (Revision of ISO 2292:1973) ISO/FDIS * Woodworking machines — ISO/FDIS 2451 Cocoa beans — Specification 19085-8 Safety — Part 8: Calibrating and and quality requirements sanding machines 2017-10-21 2017-10-07 ISO/FDIS * Machine tools safety — Press- (Revision of ISO 1114:1977, ISO 16092-1 es — Part 1: General safety 2291:1980, ISO 2451:2014) requirements 2017-10-24 TC 35 Paints and varnishes ISO/FDIS * Paints and varnishes — De- ISO/FDIS * Machine tools safety — Presses 6270-2 termination of resistance to 16092-3 — Part 3: Safety requirements humidity — Part 2: Condensation 2017-10-25 for hydraulic presses 2017-10-24 (in-cabinet exposure with heated water reservoir) TC 41 Pulleys and belts (including (Revision of ISO 6270-2:2005) veebelts) ISO/FDIS * Preparation of steel substrates ISO/FDIS * Synchronous belt drives — 11126-10 before application of paints and 17396 Metric pitch — Tooth profiles T related products — Specifica- 2017-10-04 and AT endless and open ended 2017-10-10 tions for non-metallic blast- belts and pulleys cleaning abrasives — Part 10: (Revision of ISO 17396:2014) Almandite garnet (Revision of ISO 11126-10:2000) TC 44 Welding and allied ISO/FDIS * Paints and varnishes — Corro- processes 12944-1 sion protection of steel struc- ISO/FDIS 544 * Welding consumables — Techni- tures by protective paint systems 2017-09-30 cal delivery conditions for filler — Part 1: General introduction materials and fluxes — Type of 2017-10-03 (Revision of ISO 12944-1:1998) product, dimensions, tolerances ISO/FDIS * Paints and varnishes — Cor- and markings 12944-2 rosion protection of steel (Revision of ISO 544:2011) structures by protective paint 2017-09-30 ISO/FDIS * Welding consumables — Tubu- systems — Part 2: Classification 17633 lar cored electrodes and rods of environments for gas shielded and non-gas 2017-10-17 (Revision of ISO 12944-2:1998) shielded metal arc welding of ISO/FDIS * Paints and varnishes — Corro- stainless and heat-resisting 12944-3 sion protection of steel struc- steels — Classification tures by protective paint systems 2017-09-30 (Revision of ISO 17633:2010) — Part 3: Design considerations ISO/FDIS 9017 * Destructive tests on welds in (Revision of ISO 12944-3:1998) metallic materials — Fracture ISO/FDIS * Paints and varnishes — Corro- test 2017-11-02 12944-4 sion protection of steel struc- tures by protective paint systems 2017-09-30 (Revision of ISO 9017:2001) — Part 4: Types of surface and ISO/FDIS 3821 * Gas welding equipment — Rub- surface preparation ber hoses for welding, cutting (Revision of ISO 12944-4:1998) and allied processes 2017-09-30 ISO/FDIS * Paints and varnishes — Corro- 12944-7 sion protection of steel struc- (Revision of ISO 3821:2008) tures by protective paint systems 2017-10-17 ISO/FDIS * Gas welding equipment — — Part 7: Execution and supervi- 14114 Acetylene manifold systems for sion of paint work welding, cutting and allied pro- 2017-09-29 (Revision of ISO 12944-7:1998) cesses — General requirements ISO/FDIS * Paints and varnishes — Corro- (Revision of ISO 14114:2014) 12944-8 sion protection of steel struc- ISO/FDIS * Health and safety in welding tures by protective paint systems 2017-10-17 15011-4 and allied processes — Labora- — Part 8: Development of tory method for sampling fume 2017-11-07 specifications for new work and and gases — Part 4: Fume data maintenance sheets (Revision of ISO 12944-8:1998) (Revision of ISO 15011-4:2006, TC 36 Cinematography ISO 15011-4:2006/Amd 1:2008) ISO/FDIS * Cinematography — Manufactur- ISO/FDIS * Welding — Studs and ceramic 12222 er-printed, latent image identi- 13918 ferrules for arc stud welding fication on 16 mm, 35 mm and 2017-10-13 2017-10-21 65 mm motion-picture film — Specifications and dimensions (Revision of ISO 13918:2008) (Revision of ISO 12222:2000, TC 45 Rubber and rubber ISO 12222:2000/Cor 1:2004) products TC 38 Textiles ISO/FDIS 1825 * Rubber hoses and hose assem- ISO/FDIS * Textiles — Industrial washing blies for aircraft ground fuelling 15797 and finishing procedures for test- and defuelling — Specification 2017-10-17 ing of workwear 2017-10-21 (Revision of ISO 1825:2010) (Revision of ISO 15797:2002, ISO/FDIS 8028 * Rubber and/or plastics hoses ISO 15797:2002/Cor 1:2004) and hose assemblies for airless TC 39 Machine tools paint spraying — Specification 2017-10-26

12 ISO Update, Supplement to ISO Focus -- September 2017 (Revision of ISO 8028:1999) ISO/FDIS * Financial services — Personal ISO/FDIS * Rubber and plastics hoses 9564-1 identification number (PIN) man- 10619-1 and tubing — Measurement of agement and security — Part 2017-10-05 flexibility and stiffness — Part 2017-11-07 1: Basic principles and require- 1: Bending tests at ambient ments for PINs in card-based temperature systems (Revision of ISO 10619-1:2011) (Revision of ISO 9564-1:2011, ISO 9564-1:2011/Amd 1:2015) ISO/FDIS * Rubber and plastics hoses and 10619-2 tubing — Measurement of flex- TC 79 Light metals and their ibility and stiffness — Part 2: 2017-11-01 alloys Bending tests at sub-ambient temperatures ISO/FDIS * Anodizing of aluminium and its (Revision of ISO 10619-2:2011) 10074 alloys — Specification for hard anodic oxidation coatings on 2017-10-17 ISO/FDIS * Rubber and plastics hoses — aluminium and its alloys 10960 Assessment of ozone resistance (Revision of ISO 10074:2010) under dynamic conditions 2017-11-07 TC 83 Sports and other rec- (Revision of ISO 10960:1994) reational facilities and equipment ISO/FDIS * Rubber hoses and hose assem- 28017 blies, wire or textile reinforced, ISO/FDIS 8364 * Alpine skis and bindings — Bind- for dredging applications 2017-11-18 ing mounting area — Require- — Specification ments and test methods 2017-10-25 (Revision of ISO 28017:2011, ISO 28017:2011/Amd 1:2015) (Revision of ISO 8364:2007) ISO/FDIS 37 * Rubber, vulcanized or ther- TC 96 Cranes moplastic — Determination of ISO/FDIS 4309 * Cranes — Wire ropes — Care tensile stress-strain properties 2017-09-30 and maintenance, inspection and

discard 2017-10-25 (Revision of ISO 37:2011)

ISO/FDIS 2004 * Natural rubber latex concen- (Revision of ISO 4309:2010) trate — Centrifuged or creamed, TC 107 Metallic and other inorgan- ammonia-preserved types 2017-10-21 — Specifications ic coatings (Revision of ISO 2004:2010) ISO/FDIS * Thermal spraying — Determina- TC 46 Information and 17836 tion of the deposition efficiency for thermal spraying 2017-10-03 documentation ISO/FDIS * Information and documentation (Revision of ISO 17836:2004) 18626 — Interlibrary Loan Transactions TC 114 Horology 2017-10-24 ISO/FDIS * Watch-cases and accessories (Revision of ISO 18626:2014) 16253 — Vapour phase deposited coatings 2017-10-13 TC 54 Essential oils ISO/FDIS * Essential oil of thyme [Thymus (Revision of ISO 16253:2007) 19817 vulgaris L. and Thymus zygis L.], TC 122 Packaging thymol type 2017-10-17 ISO/FDIS * Packaging — Accessible design (Revision of ISO 14715:2010) 19809 — Information and marking 2017-10-20 ISO/FDIS * Essential oil of cypress (Cupres-

20809 sus sempervirens L.) 2017-10-03 TC 126 Tobacco and tobacco products TC 61 Plastics ISO/FDIS * Bidis — Determination of total ISO/FDIS * Plastics — Injection moulding of 17175 and nicotine-free dry particulate 294-5 test specimens of thermoplastic matter using a linear routine 2017-10-17 materials — Part 5: Prepara- analytical smoking machine tion of standard specimens for ISO/FDIS * Cigarettes — Determination investigating anisotropy 22634-2 of benzo[a]pyrene in cigarette (Revision of ISO 294-5:2011) mainstream smoke using GC/ 2017-09-30 TC 67 Materials, equipment and MS — Part 2: Method using cy- clohexane as extraction solvent offshore structures for pe- (Revision of ISO 22634:2008) troleum, petrochemical and natural gas industries TC 127 Earth-moving machinery ISO/FDIS * Petroleum and natural gas indus- ISO/FDIS * Earth-moving machinery — 19901-2 tries — Specific requirements 16001 Object detection systems and for offshore structures — Part 2: 2017-10-18 visibility aids — Performance 2017-10-21 Seismic design procedures and requirements and tests criteria (Revision of ISO 16001:2008) (Revision of ISO 19901-2:2004) TC 68 Financial services

ISO Update, Supplement to ISO Focus -- September 2017 13 ISO/FDIS * Earth-moving machinery — ISO/FDIS * Geotechnical investigation and 19014-3 Safety — Part 3: Environmental 14688-1 testing — Identification and performance and test require- 2017-10-10 classification of soil — Part 1: 2017-10-21 ments of electronic and electrical Identification and description components used in safety-relat- (Revision of ISO 14688-1:2002, ed parts of the control system ISO 14688-1:2002/Amd 1:2013) TC 134 Fertilizers and soil ISO/FDIS * Geotechnical investigation and conditioners 14688-2 testing — Identification and classification of soil — Part 2: 2017-10-20 ISO/FDIS * Fertilizers and soil conditioners Principles for a classification 20702 — Determination of micro- (Revision of ISO 14688-2:2004, amounts of inorganic anions in 2017-10-24 ISO 14688-2:2004/Amd 1:2013) fertilizers by ion chromatography ISO/FDIS * Geotechnical investigation and TC 135 Non-destructive testing 14689-1 testing — Identification and ISO/FDIS * Non-destructive testing — Ultra- classification of rock — Part 1: 2017-10-20 16809 sonic thickness measurement Identification and description 2017-10-17 (Revision of ISO 14689-1:2003) ISO/FDIS * Geotechnical investigation and (Revision of ISO 16809:2012) 17892-7 testing — Laboratory testing of ISO/FDIS * Non-destructive testing — Leak soil — Part 7: Unconfined com- 2017-10-24 20485 testing — Tracer gas method pression test 2017-10-26 (Revision of ISO/TS 17892- 7:2004, ISO/TS 17892-7:2004/ Cor 1:2006) TC 138 Plastics pipes, fittings and valves for the transport of TC 184 Automation systems and fluids integration ISO/FDIS * Plastics pipes and fittings — ISO/FDIS * Automation systems and integra- 21307 Butt fusion jointing procedures 15746-2 tion — Integration of advanced for polyethylene (PE) piping 2017-10-24 process control and optimization 2017-09-30 systems capabilities for manufacturing (Revision of ISO 21307:2011) systems — Part 2: Activity mod- els and information exchange TC 145 Graphical symbols TC 202 Microbeam analysis ISO/FDIS * Graphical symbols — Safety 16069 signs — Safety way guidance ISO/FDIS * Microbeam analysis — Ana- systems (SWGS) 2017-10-05 20263 lytical transmission electron microscopy — Determination 2017-10-19 (Revision of ISO 16069:2004) method for interface position in the cross-sectional image of the TC 156 Corrosion of metals and layered materials alloys TC 204 Intelligent transport ISO/FDIS * Corrosion of metals and alloys — systems 11130 Alternate immersion test in salt solution 2017-10-21 ISO/FDIS * Intelligent transport systems — 14813-6 Reference model architecture(s) (Revision of ISO 11130:2010) for the ITS sector — Part 6: Use 2017-10-12 of ASN.1 TC 159 Ergonomics (Revision of ISO 14813-6:2009) ISO/FDIS * Ergonomics of human-system in- TC 209 Cleanrooms and associat- 9241-940 teraction — Part 940: Evaluation ed controlled environments of tactile and haptic interactions 2017-10-01 ISO/FDIS * Cleanrooms and associated con- 14644-15 trolled environments — Part 15: TC 172 Optics and photonics Assessment of suitability for use ISO/FDIS 8596 * Ophthalmic optics — Visual of equipment and materials by acuity testing — Standard and airborne chemical concentration clinical optotypes and their 2017-10-20 TC 210 Quality management and presentation (Revision of ISO 8596:2009) corresponding general as- pects for medical devices ISO/FDIS * Ophthalmic optics — Contact 11981 lenses and contact lens care ISO/FDIS * Small-bore connectors for products — Determination of 2017-10-04 80369-1 liquids and gases in healthcare physical compatibility of contact applications — Part 1: General 2017-10-21 lens care products with contact requirements lenses (Revision of ISO 80369-1:2010) (Revision of ISO 11981:2009) TC 215 Health informatics ISO/FDIS * Ophthalmic optics — Contact ISO/IEEE FDIS * Health informatics — Personal 11986 lenses and contact lens care 11073-10427 health device communication products — Determination of 2017-10-20 — Part 10427: Device specializa- 2017-12-21 preservative uptake and release tion — Power status monitor of (Revision of ISO 11986:2010) personal health devices TC 182 Geotechnics TC 227 Springs

14 ISO Update, Supplement to ISO Focus -- September 2017 ISO/FDIS * Disc springs — Part 2: Technical 19690-2 specifications 2017-10-12

TC 228 Tourism and related services ISO/FDIS * Tourism and related services Standards published 20410 — Bareboat charter — Mini- mum service and equipment 2017-09-28 requirements New International Standards published between 01 August and 31 August 2017 CASCO Committee on conformity assessment * Available in English only ISO/IEC FDIS * Conformity assessment — ** French version of standard previously published in English only 17011 Requirements for accreditation bodies accrediting conformity 2017-10-10 assessment bodies

(Revision of ISO/IEC Price 17011:2004) group ISO/IEC FDIS * General requirements for the 17025 competence of testing and cali- IIW International Institute of Welding bration laboratories 2017-10-10 ISO Resistance welding — Vickers hard- (Revision of ISO/IEC 14271:2017 ness testing (low-force and microhard- 17025:2005) ness) of resistance spot, projection, B and seam welds JTC 1 Information technology ISO/TS Guidelines on weld quality in relation- ISO/IEC FDIS * Information technology — The 20273:2017 ship to fatigue strength 21778 JSON data interchange format F 2017-10-21

PC 280 Management consultancy ISO/IEC FDIS * Systems and software engineer- 29155-1 ing — Information technology ISO Guidelines for management consul- project performance bench- 2017-09-30 20700:2017 tancy services marking framework — Part 1: E Concepts and definitions (Revision of ISO/IEC REMCO Committee on reference 29155-1:2011) materials ISO/IEC * Information technology — Cod- ISO Guide * Reference materials — Guidance for 14496- ing of audio-visual objects — 35:2017 characterization and assessment of 16:2011/ Part 16: Animation Framework 2017-09-28 homogeneity and stability H FDAmd 4 eXtension (AFX) — Amendment

4: Pattern-based 3D mesh cod- ing (PB3DMC) TC 4 Rolling bearings ISO/IEC FDIS * Information technology — Scal- ISO 15:2017 Rolling bearings — Radial bearings — 18477-5 able compression and coding of Boundary dimensions, general plan continuous-tone still images — 2017-10-17 D Part 5: Reference software ISO/IEC FDIS * Information technology - Mul- ISO Rolling bearings — Measuring methods 23000-13 timedia application format 15242-3:2017 for vibration — Part 3: Radial spherical (MPEG-A) — Part 13: Augment- 2017-10-17 and tapered roller bearings with cylin- B ed reality application format drical bore and outside surface (Revision of ISO/IEC 23000- ISO * Rolling bearings — Measuring methods 13:2014, ISO/IEC 23000- 15242-4:2017 for vibration — Part 4: Radial cylindri- 13:2014/Amd 1:2015) cal roller bearings with cylindrical bore B ISO/IEC * Information technology — High and outside surface 23008-5:2017/ efficiency coding and media ISO * Spherical plain bearings — Method for FDAmd 1 delivery in heterogeneous envi- 2017-10-07 20015:2017 the calculation of static and dynamic ronments — Part 5: Reference load ratings B software for high efficiency video

coding — Amendment 1: Refer- ence software for screen content TC 6 Paper, board and pulps coding extensions ISO Pulp, paper and board — Determina- ISO/IEC FDIS * Information technology — Dy- 11480:2017 tion of total chlorine and organically 23009-6 namic adaptive streaming bound chlorine C over HTTP (DASH) — Part 6: 2017-10-14 DASH with server push and ISO * Paper and board — Determination of WebSockets 8791-3:2017 roughness/smoothness (air leak meth- ISO/IEC FDIS * Information technology — Cloud ods) — Part 3: Sheffield method C 19941 computing — Interoperability and portability 2017-10-21 TC 8 Ships and marine technology

ISO Update, Supplement to ISO Focus -- September 2017 15 ISO * Ships and marine technology — Test ISO * Road vehicles — Compressed gaseous 20155:2017 method of flow induced in-pipe noise 12619-15:2017 hydrogen (CGH2) and hydrogen/natural source characteristics for a ship-used D gas blends fuel system components — A pump Part 15: Filter TC 20 Aircraft and space vehicles ISO * Road vehicles — Compressed gaseous 12619-16:2017 hydrogen (CGH2) and hydrogen/natural ISO 9667:2017 * Aircraft ground support equipment — gas blends fuel system components — A Tow bars Part 16: Fittings B TC 23 Tractors and machinery for agri- ISO * Aircraft — Ground service connections culture and forestry 10842:2017 — Locations and types ISO Gardening machinery — Powered B 21628:2008/ material-collecting systems — Safety Amd 1:2015 — Amendment 1 XZ ISO * Space systems — Design qualification 19683:2017 and acceptance tests of small space- TC 27 Solid mineral fuels craft and units H ISO * Methods for the petrographic analysis 7404-4:2017 of coals — Part 4: Method of determin- TC 21 Equipment for fire protection ing microlithotype, carbominerite and B and fire fighting minerite composition ISO * Fire protection equipment — Carbon TC 28 Petroleum and related products, 6183:2009/ dioxide extinguishing systems for use fuels and lubricants from natural Amd 1:2017 on premises — Design and installation XZ or synthetic sources — Amendment 1 ISO 2592:2017 Petroleum and related products — TC 22 Road vehicles Determination of flash and fire points ISO Electrically propelled road vehicles — Cleveland open cup method C 17409:2015 — Connection to an external electric power supply — Safety requirements D TC 29 Small tools

ISO 3364:2017 Indexable hardmetal (carbide) inserts ISO/TS * Electrically propelled mopeds and mo- with rounded corners, with cylindrical 19466:2017 torcycles — Test method for evaluating fixing hole — Dimensions C performance of regenerative braking C systems TC 30 Measurement of fluid flow in ISO * Road vehicles — Symbols for controls, closed conduits 2575:2010/ indicators and tell-tales — Amend- Amd 6:2017 ment 6 XZ ISO * Measurement of fluid flow in closed 12764:2017 conduits — Flowrate measurement by means of vortex shedding flowmeters D ISO * Road vehicles — Symbols for controls, inserted in circular cross-section con- 2575:2010/ indicators and tell-tales — Amend- duits running full Amd 7:2017 ment 7 XZ TC 31 Tyres, rims and valves ISO * Road vehicles — Compressed gaseous ISO * Earth-mover tyres and rims — Part 2: 12619-8:2017 hydrogen (CGH2) and hydrogen/natural 4250-2:2017 Loads and inflation pressures gas blends fuel system components — A D Part 8: Pressure indicator ISO * Road vehicles — Compressed gaseous ISO TPMS snap-in valves — Part 1: 12619-9:2017 hydrogen (CGH2) and hydrogen/natural 18885-1:2017 Identification gas blends fuel system components — A A Part 9: Pressure relief valve (PRV) ISO * Road vehicles — Compressed gaseous TC 34 Food products 12619-10:2017 hydrogen (CGH2) and hydrogen/natural ISO/TS Animal welfare management — Gen- gas blends fuel system components — B 34700:2016 eral requirements and guidance for Part 10: Pressure relief device (PRD) organizations in the food supply chain B ISO * Road vehicles — Compressed gaseous 12619-11:2017 hydrogen (CGH2) and hydrogen/natural ISO Oilseeds — Manual or automatic dis- gas blends fuel system components — A 21294:2017 continuous sampling Part 11: Excess flow valve B ISO * Road vehicles — Compressed gaseous 12619-12:2017 hydrogen (CGH2) and hydrogen/natural ISO Animal feeding stuffs, cereals and gas blends fuel system components A 12099:2017 milled cereal products — Guidelines — Part 12: Gas-tight housing and for the application of near infrared E ventilation hoses spectrometry ISO * Road vehicles — Compressed gaseous 12619-13:2017 hydrogen (CGH2) and hydrogen/natural TC 35 Paints and varnishes gas blends fuel system components — A ISO Paints and varnishes — Determination Part 13: Rigid fuel line in stainless steel 11997-1:2017 of resistance to cyclic corrosion condi- ISO * Road vehicles — Compressed gaseous tions — Part 1: Wet (salt fog)/dry/humid C 12619-14:2017 hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — A ISO Paints and varnishes — Artificial Part 14: Flexible fuel line 15110:2017 weathering including acidic deposition C

16 ISO Update, Supplement to ISO Focus -- September 2017 ISO * Paints and varnishes — Determination ISO 4079:2017 * Rubber hoses and hose assemblies 19396-1:2017 of pH value — Part 1: pH electrodes — Textile-reinforced hydraulic types with glass membrane C for oil-based or water-based fluids C — Specification ISO * Paints and varnishes — Determination ISO 6943:2017 Rubber, vulcanized — Determination of 19396-2:2017 of pH value — Part 2: pH electrodes tension fatigue with ISFET technology C C

ISO Paints and varnishes — Wedge-cut ISO Rubber-covered rollers — Determina- 19399:2016 method for determination of film thick- 7267-1:2017 tion of apparent hardness — Part 1: ness (scribe and drill method) E IRHD method A

TC 38 Textiles ISO Rubber-covered rollers — Determina- 7267-3:2017 tion of apparent hardness — Part 3: ISO * Textiles — Quantitative chemical analy- Pusey and Jones method B 1833-7:2017 sis — Part 7: Mixtures of polyamide

with certain other fibres (method using A formic acid) ISO * Rubber and rubber products — Deter- 19984-1:2017 mination of biobased content — Part ISO * Textiles — Quantitative chemical 1: General principles and calculation C 1833-11:2017 analysis — Part 11: Mixtures of certain methods using the formulation of the cellulose fibres with certain other fibres A rubber compound (method using sulfuric acid) ISO * Rubber and rubber products — Deter- ISO Textiles — Tests for colour fastness — 19984-2:2017 mination of biobased content — Part 2: 105-G01:2016 Part G01: Colour fastness to nitrogen Biobased carbon content D oxides B

ISO * Rubber and rubber products — Deter- TC 39 Machine tools 19984-3:2017 mination of biobased content — Part 3: ISO/TR * Machine tool spindles — Evaluation Biobased mass content D 17243-2:2017 of spindle vibrations by measure- ments on non-rotating parts — Part 2: C ISO 2930:2017 Rubber, raw natural — Determination Direct-driven spindles and belt-driven of plasticity retention index (PRI) spindles with rolling element bearings B operating at speeds between 600 r/min

and 30 000 r/min ISO Rubber compounding ingredients — TC 43 Acoustics 11236:2017 p-Phenylenediamine antidegradants ISO 9296:2017 Acoustics — Declared noise emission (PPDs) — Test methods D values of information technology and telecommunications equipment C ISO * Synthetic rubber latex — Examination 20851:2017 for microorganisms TC 44 Welding and allied processes A

ISO Non-destructive testing of welds — 19285:2017 Phased array ultrasonic testing (PAUT) ISO * Rubber, raw — Determination of the — Acceptance levels D 22768:2017 glass transition temperature by differ- ential scanning calorimetry (DSC) B

ISO Non-destructive testing of welds — 23279:2017 Ultrasonic testing — Characterization ISO 2321:2017 * Rubber threads — Methods of test of discontinuities in welds C E

ISO Resistance welding — Weldability — 18278-3:2017 Part 3: Evaluation procedures for weld- ISO 4675:2017 * Rubber- or plastics-coated fabrics — ability in spot weld bonding D Low-temperature bend test A

ISO Soft soldering fluxes — Test methods 9455-11:2017 — Part 11: Solubility of flux residues ISO Rubber- or plastics-coated fabrics — A 5470-1:2016 Determination of abrasion resistance — Part 1: Taber abrader B

ISO Soft soldering fluxes — Test meth- 9455-13:2017 ods — Part 13: Determination of flux ISO * Meteorological balloons spattering A 17717:2017 — Specification D

ISO Soft soldering fluxes — Test methods 9455-14:2017 — Part 14: Assessment of tackiness of ISO * General purpose rubber thread flux residues A 20058:2017 — Specification A

ISO Soft soldering fluxes — Test methods 9455-15:2017 — Part 15: Copper corrosion test TC 46 Information and documentation B ISO * Information and documentation — 28500:2017 WARC file format TC 45 Rubber and rubber products D

ISO Update, Supplement to ISO Focus -- September 2017 17 ISO/TR * Information and documentation — Col- ISO Petroleum, petrochemical and natural 19814:2017 lections management for archives and 18797-1:2016 gas industries — External corrosion libraries G protection of risers by coatings and E linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM TC 58 Gas cylinders ISO Standard cost coding system for oil ISO Gas cylinders — Residual pressure 19008:2016 and gas production and processing 15996:2017 valves — Specification and type test- facilities B ing of cylinder valves incorporating D

residual pressure devices ISO * Petroleum and natural gas industries TC 59 Buildings and civil engineering 18647:2017 — Modular drilling rigs for offshore works fixed platforms H ISO * Buildings and civil engineering works 6707-3:2017 — Vocabulary — Part 3: Sustainability ISO Petroleum and natural gas industries terms A 14692-1:2017 — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, G ISO * Houses — Description of performance applications and materials 15928-4:2017 — Part 4: Fire safety ISO Petroleum and natural gas industries C 14692-2:2017 — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and G TC 61 Plastics manufacture ISO Plastics — Methods for the preparation ISO Petroleum and natural gas industries 10210:2012 of samples for biodegradation testing 14692-3:2017 — Glass-reinforced plastics (GRP) of plastic materials D piping — Part 3: System design F

ISO Plastics — Determination of the ISO Petroleum and natural gas industries 14853:2016 ultimate anaerobic biodegradation of 14692-4:2017 — Glass-reinforced plastics (GRP) pip- plastic materials in an aqueous system E ing — Part 4: Fabrication, installation G — Method by measurement of biogas and operation production ISO * Petroleum, petrochemical and natural ISO Plastics — Determination of the ulti- 24817:2017 gas industries — Composite repairs 15985:2014 mate anaerobic biodegradation under for pipework — Qualification and de- H high-solids anaerobic-digestion condi- B sign, installation, testing and inspection tions — Method by analysis of released TC 70 Internal combustion engines biogas ISO Reciprocating internal combustion ISO Plastics — Determination of aerobic 8178-4:2017 engines — Exhaust emission meas- 18830:2016 biodegradation of non-floating plastic urement — Part 4: Steady-state and H materials in a seawater/sandy sedi- B transient test cycles for different engine ment interface — Method by meas- applications uring the oxygen demand in closed respirometer TC 76 Transfusion, infusion and injection, and blood process- ISO Plastics — Determination of aerobic 19679:2016 biodegradation of non-floating plastic ing equipment for medical and materials in a seawater/sediment inter- B pharmaceutical use face — Method by analysis of evolved ISO/TR * Medical devices — Pump tube spalla- carbon dioxide 19727:2017 tion test — General procedure ISO 4582:2017 * Plastics — Determination of changes in A colour and variations in properties after exposure to glass-filtered solar radia- C TC 83 Sports and other recreational tion, natural weathering or laboratory facilities and equipment radiation sources ISO Floating leisure articles for use on and ISO * Superabsorbent polymer — Sodium 25649-1:2017 in the water — Part 1: Classification, 19699-1:2017 polyacrylate resin for absorbing blood materials, general requirements and E — Part 1: Test methods B test methods

ISO Floating leisure articles for use on ISO * Superabsorbent polymer — Sodium 25649-2:2017 and in the water — Part 2: Consumer 19699-2:2017 polyacrylate resin for absorbing blood information D — Part 2: Specifications A

ISO Floating leisure articles for use on ISO * Textile glass — Chopped-strand and 25649-3:2017 and in the water — Part 3: Additional 3616:2001/ continuous-filament mats — Determi- specific safety requirements and test C Amd 1:2017 nation of average thickness, thickness XZ methods for Class A devices under load and recovery after com- pression — Amendment 1 ISO Floating leisure articles for use on 25649-4:2017 and in the water — Part 4: Additional TC 67 Materials, equipment and off- specific safety requirements and test D shore structures for petroleum, methods for Class B devices petrochemical and natural gas ISO Floating leisure articles for use on industries 25649-5:2017 and in the water — Part 5: Additional ISO Petroleum, petrochemical and natural specific safety requirements and test D 14224:2016 gas industries — Collection and ex- methods for Class C devices change of reliability and maintenance H data for equipment

18 ISO Update, Supplement to ISO Focus -- September 2017 ISO Floating leisure articles for use on ISO * Carbon based films — Classification 25649-6:2017 and in the water — Part 6: Additional 20523:2017 and designations specific safety requirements and test C B methods for Class D devices ISO Floating leisure articles for use on ISO 2082:2017 Metallic and other inorganic coatings 25649-7:2017 and in the water — Part 7: Additional — Electroplated coatings of cadmium specific safety requirements and test D with supplementary treatments on iron C methods for Class E devices or steel TC 85 Nuclear energy, nuclear tech- TC 108 Mechanical vibration, shock and nologies, and radiological condition monitoring protection ISO 7919- Mechanical vibration — Evaluation of ISO Measurement of radioactivity — De- 4:2009/Amd machine vibration by measurements on 19361:2017 termination of beta emitters activities 1:2017 rotating shafts — Part 4: Gas turbine XZ — Test method using liquid scintillation D sets with fluid-film bearings — Amend- counting ment 1 ISO Nuclear energy — Determination of ISO 10816- Mechanical vibration — Evaluation of 22875:2017 chlorine and fluorine in uranium dioxide 3:2009/Amd machine vibration by measurements on powder and sintered pellets B 1:2017 non-rotating parts — Part 3: Industrial XZ machines with nominal power above 15 kW and nominal speeds between TC 89 Wood-based panels 120 r/min and 15 000 r/min when ISO * Plywood — Vocabulary — Amend- measured in situ — Amendment 1 2074:2007/ ment 1 ISO 10816- Mechanical vibration — Evaluation of Amd 1:2017 A 4:2009/Amd machine vibration by measurements 1:2017 on non-rotating parts — Part 4: Gas XZ TC 92 Fire safety turbine sets with fluid-film bearings — Amendment 1 ISO * Fire safety — Vocabulary 13943:2017 ISO Condition monitoring and diagnostics A 13373-7:2017 of machines — Vibration condition monitoring — Part 7: Diagnostic tech- D niques for machine sets in hydraulic ISO/TR * Fire safety engineering — Performance power generating and pump-storage 24679-4:2017 of structures in fire — Part 4: Example plants of a fifteen-storey steel-framed office F building ISO/TR * Mechanical vibration — Measurement 18570:2017 and evaluation of human exposure to TC 94 Personal safety -- Protective hand transmitted vibration — Supple- C clothing and equipment mentary method for assessing risk of ISO Personal protective equipment — vascular disorders 20349-2:2017 Footwear protecting against risks TC 112 Vacuum technology in foundries and welding — Part 2: B Requirements and test methods for ISO 3669:2017 Vacuum technology — Bakeable protection against risks in welding and flanges — Dimensions of knife-edge allied processes flanges B

TC 96 Cranes TC 119 Powder metallurgy ISO * Cranes — Inspections — Part 5: Bridge 9927-5:2017 and gantry cranes, including portal and ISO 3927:2017 Metallic powders, excluding powders semi-portal cranes and their support- C for hardmetals — Determination of ing structures compressibility in uniaxial compression B

TC 102 Iron ore and direct reduced iron TC 122 Packaging ISO * Iron ores — Determination of nickel — 15633:2017 Flame atomic absorption spectrometric ISO/TS * Packaging — Codification of con- method C 17451-2:2017 tents for inventories for shipments of household goods and personal effects D — Part 2: XML messaging structure ISO * Iron ores — Determination of trace for electronic transmission of inventory 22682:2017 elements — Plasma spectrometric data method D TC 127 Earth-moving machinery TC 106 Dentistry ISO Earth-moving machinery — Sustain- 10987-2:2017 ability — Part 2: Remanufacturing ISO Dentistry — Water-based cements — B 9917-2:2017 Part 2: Resin-modified cements D ISO Earth-moving machinery — Sustain- 10987-3:2017 ability — Part 3: Used machines ISO Dentistry — Sinus membrane elevator B 19490:2017 A ISO Earth-moving machinery — Loaders — 7131:2009/ Terminology and commercial specifica- TC 107 Metallic and other inorganic Amd 1:2017 tions — Amendment 1 XZ coatings TC 130 Graphic technology

ISO Update, Supplement to ISO Focus -- September 2017 19 ISO * Graphic technology — Colour and ISO * Corrosion of metals and alloys — 2846-1:2017 transparency of printing ink sets for 19280:2017 Measurement of critical crevice four-colour printing — Part 1: Sheet- C temperature for cylindrical crevice C fed and heat-set web offset lithograph- geometries in ferric chloride solution ic printing TC 157 Non-systemic contraceptives ISO * Graphic technology — Variable content and STI barrier prophylactics 16613-1:2017 replacement — Part 1: Using PDF/X for variable content replacement (PDF/ D ISO * Female condoms — Requirements and VCR-1) 25841:2017 test methods G ISO * Graphic technology — Measurement 20654:2017 and calculation of spot colour tone value A TC 158 Analysis of gases ISO Gas analysis — Handling of calibration TC 131 Fluid power systems 16664:2017 gases and gas mixtures — Guidelines C ISO Connections for fluid power and gener- 6149-4:2017 al use — Ports and stud ends with ISO 261 metric threads and O-ring sealing B TC 159 Ergonomics — Part 4: Dimensions, design, test ISO * Basic human body measurements methods and requirements for external 7250-1:2017 for technological design — Part 1: hex and internal hex port plugs Body measurement definitions and G ISO 7789:2007 Hydraulic fluid power — Two-, three- landmarks and four-port screw-in cartridge valves ISO Ergonomics of human-system interac- — Cavities D 9241-125:2017 tion — Part 125: Guidance on visual presentation of information F ISO * Pneumatic fluid power systems — Di- 20401:2017 rectional control valves — Specification ISO 7243:2017 * Ergonomics of the thermal environment of pin assignment for 8 mm and 12 mm A — Assessment of heat stress using the diameter electrical round connectors WBGT (wet bulb globe temperature) C ISO 4406:2017 * Hydraulic fluid power — Fluids — index Method for coding the level of con- TC 163 Thermal performance and en- tamination by solid particles A ergy use in the built environment

ISO Thermal performance of buildings and TC 132 Ferroalloys 12569:2017 materials — Determination of specific ISO 5446:2017 * Ferromanganese — Specification and airflow rate in buildings — Tracer gas G conditions of delivery dilution method B TC 165 Timber structures

ISO * Timber structures — Determination of TC 138 Plastics pipes, fittings and 12122-6:2017 characteristic values — Part 6: Large valves for the transport of fluids components and assemblies D ISO * Thermoplastics piping systems for 13260:2010/ non-pressure underground drainage TC 168 Prosthetics and orthotics Amd 1:2017 and sewerage — Test method for XZ resistance to combined tempera- ISO Prosthetics and orthotics — Soft ture cycling and external loading — 21063:2017 orthoses — Uses, functions, classifica- Amendment 1 tion and description A

ISO Plastics pipes and fittings — Equip- 12176-1:2017 ment for fusion jointing polyethylene ISO Prosthetics and orthotics — Foot or- systems — Part 1: Butt fusion D 21064:2017 thotics — Uses, functions classification and description A

ISO Plastics piping systems — Thermo- 19892:2011 plastics pipes and fittings for hot and ISO Prosthetics and orthotics — Terms cold water — Test method for the A 21065:2017 relating to the treatment and rehabilita- resistance of joints to pressure cycling tion of persons having a lower limb A amputation TC 142 Cleaning equipment for air and TC 172 Optics and photonics other gases ISO Optics and photonics — Preparation of ISO Cleaning of air and other gases 10110-7:2017 drawings for optical elements and sys- 29464:2017 — Terminology tems — Part 7: Surface imperfections B E

ISO Optics and photonics — Test methods TC 146 Air quality 14997:2017 for surface imperfections of optical ISO 9096:2017 * Stationary source emissions — Manual elements C determination of mass concentration of particulate matter F ISO/TR * Optics and photonics — Preparation

21477:2017 of drawings for optical elements and ISO Indoor air — Part 33: Determination of systems — Surface imperfection speci- A 16000-33:2017 phthalates with gas chromatography/ fication and measurement systems mass spectrometry (GC/MS) F ISO Ophthalmic optics — Contact

11978:2017 lenses and contact lens care products TC 156 Corrosion of metals and alloys — Labelling B

20 ISO Update, Supplement to ISO Focus -- September 2017 ISO Ophthalmic implants — Intraocu- ISO * Surface chemical analysis — X-ray 11979-8:2017 lar lenses — Part 8: Fundamental 19668:2017 photoelectron spectroscopy — Esti- requirements A mating and reporting detection limits D for elements in homogeneous materials ISO Ophthalmic optics — Contact lenses TC 204 Intelligent transport systems 18369-1:2017 — Part 1: Vocabulary, classification ISO * Intelligent transport systems — ITS system and recommendations for A 14817-3:2017 data dictionaries — Part 3: Object labelling specifications identifier assignments for ITS data B ISO Ophthalmic optics — Contact lenses concepts 18369-2:2017 — Part 2: Tolerances ISO/TR * Intelligent transport systems — Pre- B 18317:2017 emption of ITS communication

networks for disaster and emergency A ISO Ophthalmic optics — Contact lenses communication — Use case scenarios 18369-3:2017 — Part 3: Measurement methods F TC 206 Fine ceramics ISO Fine ceramics (advanced ceramics, ad- 18753:2017 vanced technical ceramics) — Deter- ISO Ophthalmic optics — Contact lenses mination of absolute density of ceramic B 18369-4:2017 — Part 4: Physicochemical properties powders by pycnometer of contact lens materials F ISO * Fine ceramics (advanced ceramics, 19674:2017 advanced technical ceramics) — ISO Optics and photonics — Lasers and Methods of test for ceramic coatings B 11554:2017 laser-related equipment — Test meth- — Determination of internal stress in ods for laser beam power, energy and C ceramic coatings by application of the temporal characteristics Stoney formula TC 184 Automation systems and TC 210 Quality management and cor- integration responding general aspects for ISO * Data quality — Part 2: Vocabulary medical devices 8000-2:2017 A ISO * Medical devices — Recognized 16142-2:2017 essential principles of safety and per- formance of medical devices — Part F ISO * Industrial automation systems and 2: General essential principles and ad- 18828-3:2017 integration — Standardized procedures ditional specific essential principles for for production systems engineering — G all IVD medical devices and guidance Part 3: Information flows in production on the selection of standards planning processes TC 211 Geographic information/ TC 190 Soil quality Geomatics ISO 18400- Soil quality — Sampling — Part 102: ISO * Geographic information — Place Iden- 102:2017 Selection and application of sampling 19155-2:2017 tifier (PI) architecture — Part 2: Place techniques G Identifier (PI) linking E

ISO 18400- Soil quality — Sampling — Part 103: TC 215 Health informatics 103:2017 Safety E ISO/IEEE Health informatics — Personal health 11073- device communication — Part 10418: 10418:2014/ Device specialization — International free ISO 18400- Soil quality — Sampling — Part 105: Cor 1:2016 Normalized Ratio (INR) monitor — 105:2017 Packaging, transport, storage and Technical Corrigendum 1 preservation of samples B ISO Health informatics — Digital imag- 12052:2017 ing and communication in medicine ISO 18400- Soil quality — Sampling — Part 106: (DICOM) including workflow and data C 106:2017 Quality control and quality assurance management B ISO * Health informatics — Public key 17090-5:2017 infrastructure — Part 5: Authentication ISO 18400- Soil quality — Sampling — Part 107: using Healthcare PKI credentials C 107:2017 Recording and reporting

B IEC/TR 80001- * Application of risk management for 2-9:2017 IT-networks incorporating medical ISO 18400- Soil quality — Sampling — Part 201: devices — Part 2-9: Application guid- BD 201:2017 Physical pretreatment in the field ance — Guidance for use of security D assurance cases to demonstrate con-

fidence in IEC/TR 80001-2-2 security ISO * Soil quality — Assessment of impact capabilities 11504:2017 from soil contaminated with petroleum TC 219 Floor coverings hydrocarbons D ISO 9405:2015 Textile floor coverings — Assessment of changes in appearance ISO * Soil quality — Sustainable remediation A 18504:2017

D TC 228 Tourism and related services TC 201 Surface chemical analysis

ISO Update, Supplement to ISO Focus -- September 2017 21 ISO Tourism and related services — Well- ISO/IEC/IEEE * Information technology — Telecom- 17679:2016 ness spa — Service requirements 8802-1Q:2016/ munications and information exchange C Amd 1:2017 between systems — Local and H metropolitan area networks — Specific requirements — Part 1Q: Bridges and TC 229 Nanotechnologies bridged networks — Amendment 1: ISO/TR Nanotechnologies — Aerosol gen- Path control and reservation 19601:2017 eration for air exposure studies of ISO/IEC/IEEE * Information technology — Telecom- nano-objects and their aggregates and G 8802-1Q:2016/ munications and information exchange agglomerates (NOAA) Amd 3:2017 between systems — Local and G ISO/TS * Nanotechnologies — Standard terms metropolitan area networks — Specific 20477:2017 and their definition for cellulose requirements — Part 1Q: Bridges and nanomaterial A bridged networks — Amendment 3: Enhancements for scheduled traffic TC 232 Learning services outside formal ISO/IEC/IEEE * Information technology — Telecom- education 8802-1AB:2017 munications and information exchange between systems — Local and H ISO * Learning services outside formal edu- metropolitan area networks — Specific 29993:2017 cation — Service requirements requirements — Part 1AB: Station and B media access control connectivity

discovery TC 244 Industrial furnaces and associ- ISO/IEC Systems and software engineer- ated processing equipment 25063:2014 ing — Systems and software product ISO * Industrial furnaces and associated Quality Requirements and Evaluation E 13579-11:2017 processing equipment — Method of (SQuaRE) — Common Industry Format measuring energy balance and cal- G (CIF) for usability: Context of use culating energy efficiency — Part 11: description Evaluation of various kinds of efficiency ISO/IEC Systems and software engineering — TC 249 Traditional chinese medicine 25064:2013 Software product Quality Requirements and Evaluation (SQuaRE) — Common D ISO * Traditional Chinese medicine — Coding Industry Format (CIF) for usability: User 20333:2017 rules for Chinese medicines in supply needs report chain management B ISO/IEC * Software and systems engineering 26558:2017 — Methods and tools for variability TC 261 Additive manufacturing modelling in software and systems F ISO/ASTM Additive manufacturing — General product line 52901:2017 principles — Requirements for pur- ISO/IEC * Software and systems engineering chased AM parts B 26559:2017 — Methods and tools for variability traceability in software and systems E TC 265 Carbon dioxide capture, trans- product line portation, and geological ISO/IEC * Information technology — Home storage 14543-5- electronic systems (HES) architec- 8:2017 ture — Part 5-8: Intelligent grouping F ISO/TR * Carbon dioxide capture, transportation and resource sharing for HES Class 2 27915:2017 and geological storage — Quantifica- and Class 3 — Remote access core tion and verification G protocol

ISO/IEC * Information technology — Home TC 268 Sustainable cities and 14543-5- electronic systems (HES) architec- communities 9:2017 ture — Part 5-9: Intelligent grouping D ISO * Smart community infrastructures and resource sharing for HES class 2 37154:2017 — Best practice guidelines for and class 3 — Remote access service transportation D platform ISO/IEC * Information technology — Security TC 269 Railway applications 14888-3:2016 techniques — Digital signatures with appendix — Part 3: Discrete logarithm H ISO Railway applications — Heating, ven- based mechanisms 19659-1:2017 tilation and air conditioning systems for rolling stock — Part 1: Terms and A ISO/IEC * Information technology — Security definitions 15946-5:2017 techniques — Cryptographic tech- niques based on elliptic curves — Part E IULTCS International Union of Leather 5: Elliptic curve generation Technologists and Chemists ISO/IEC * Information technology — Secu- Societies 20009-4:2017 rity techniques — Anonymous entity ISO Leather — Physical and mechanical authentication — Part 4: Mechanisms D 17231:2017 tests — Determination of water repel- based on weak secrets lency of garment leather B ISO/IEC * Information technology — Security

29151:2017 techniques — Code of practice for CASCO Committee on conformity personally identifiable information F assessment protection ISO/IEC * General requirements for the com- ISO/IEC * Information technology — Coding 17025:2005 petence of testing and calibration 14496- of audio-visual objects — Part 22: laboratories E 22:2015/Amd Open Font Format — Amendment XZ 2:2017 2: Updated text layout features and implementations JTC 1 Information technology

22 ISO Update, Supplement to ISO Focus -- September 2017 ISO/IEC * Information technology — MPEG TC 23 Tractors and machinery for agriculture 23001-4:2017 systems technologies — Part 4: Codec and forestry configuration representation H ISO 11850:2011 ISO/IEC * Information technology — High ef- TC 28 Petroleum and related products, fuels 23008-1:2017 ficiency coding and media delivery in and lubricants from natural or synthetic heterogeneous environments — Part 1: H sources MPEG media transport (MMT) ISO 6247:1998 (reconfirmed) ISO/IEC TR * Information technology — High ef- TC 34 Food products 23008-13:2017 ficiency coding and media delivery in heterogeneous environments — Part H ISO 873:1980 (reconfirmed) 13: MPEG media transport implemen- ISO 874:1980 (reconfirmed) tation guidelines ISO 949:1987 (reconfirmed) ISO/IEC * Information technology — Gesture- 30113-11:2017 based interfaces across devices and ISO 1212:1995 (reconfirmed) methods — Part 11: Single-point ges- E ISO 1990-2:1985 (reconfirmed) tures for common system actions ISO 1991-2:1995 (reconfirmed) ISO/IEC TR * Information technology for learning, 20748-2:2017 education and training — Learning ISO 4186:1980 (reconfirmed) analytics interoperability — Part 2: Sys- C ISO 4187:1980 (reconfirmed) tem requirements ISO 5516:1978 (reconfirmed) ISO/IEC * Information technology — Biometric ISO 5519:2008 (reconfirmed) 30107-3:2017 presentation attack detection — Part 3: Testing and reporting E ISO 6478:1990 (reconfirmed) ISO 6663:1995 (reconfirmed)

ISO 6756:1984 (reconfirmed) ISO 7560:1995 (reconfirmed) ISO 7922:1985 (reconfirmed) ISO 9719:1995 (reconfirmed) ISO 22855:2008 (reconfirmed) Standards confirmed ISO 7925:1999 (reconfirmed) ISO 8589:2007 (reconfirmed) ISO 11037:2011 The following International Standards are confimred for a five year period: ISO 29842:2011 TC 35 Paints and varnishes TC 8 Ships and marine technology ISO 10890:2010 ISO 3902:1990 (reconfirmed) ISO 15181-1:2007 (reconfirmed) ISO 7462:1985 (reconfirmed) ISO 15181-2:2007 (reconfirmed) TC 20 Aircraft and space vehicles ISO 15181-3:2007 (reconfirmed) ISO 493:1975 (reconfirmed) TC 44 Welding and allied processes ISO 1466:1973 (reconfirmed) ISO 15609-1:2004 (reconfirmed) ISO 1547:1975 (reconfirmed) TC 58 Gas cylinders ISO 1548:1976 (reconfirmed) ISO 11114-1:2012 ISO 1549:1976 (reconfirmed) TC 67 Materials, equipment and offshore ISO 1967:1974 (reconfirmed) structures for petroleum, petrochemi- cal and natural gas industries ISO 2042:1973 (reconfirmed) ISO 10414-1:2008 (reconfirmed) ISO 2155:1974 (reconfirmed) ISO 10416:2008 (reconfirmed) ISO 2156:1974 (reconfirmed) ISO 10427-1:2001 (reconfirmed) ISO 2678:1985 (reconfirmed) TC 70 Internal combustion engines ISO 3282:1976 (reconfirmed) ISO 3046-6:1990 (reconfirmed) ISO 3456:1975 (reconfirmed) ISO 5065-2:1986 (reconfirmed) TC 72 Textile machinery and accessories ISO 5066-1:1986 (reconfirmed) ISO 8232:1988 (reconfirmed) ISO 5066-2:1986 (reconfirmed) TC 82 Mining ISO 5867-1:1996 (reconfirmed) ISO 721:1991 (reconfirmed) TC 21 Equipment for fire protection and fire ISO 722:1991 (reconfirmed) fighting ISO 723:1991 (reconfirmed) ISO/TS (reconfirmed) ISO 1717:1974 (reconfirmed) 11602-1:2010 ISO 1718:1991 (reconfirmed) ISO/TS (reconfirmed) ISO 1721:1974 (reconfirmed) 11602-2:2010 ISO 1722:1974 (reconfirmed)

ISO Update, Supplement to ISO Focus -- September 2017 23 ISO 10207:1991 (reconfirmed) TC 45 Rubber and rubber products ISO 10208:1991 (reconfirmed) ISO 6447:1983 (replaced by ISO 16010:2005) TC 94 Personal safety -- Protective clothing ISO 6448:1985 (replaced by ISO 16010:2005) and equipment TC 67 Materials, equipment and offshore ISO/TR 2801:2007 structures for petroleum, petrochemi- TC 100 Chains and chain sprockets for power cal and natural gas industries transmission and conveyors ISO/TS (replaced by ) ISO 6973:1986 (reconfirmed) 16530-2:2014 TC 102 Iron ore and direct reduced iron TC 79 Light metals and their alloys ISO 4698:2007 (reconfirmed) ISO 9033:1989 (replaced by ) ISO 15967:2007 (reconfirmed) ISO 9208:1989 (replaced by ) TC 121 Anaesthetic and respiratory equipment TC 94 Personal safety -- Protective clothing and equipment ISO 81060-1:2007 (reconfirmed) ISO 20349:2010 (replaced by ISO 20349-1:2017, ISO TC 131 Fluid power systems 20349-2:2017) ISO 4401:2005 (reconfirmed) TC 112 Vacuum technology ISO 15218:2003 (reconfirmed) ISO/TS (replaced by ISO 3669:2017) ISO 15407-2:2003 (reconfirmed) 3669-2:2007 TC 135 Non-destructive testing TC 122 Packaging ISO 15548-3:2008 (reconfirmed) ISO 16883:2007 (replaced by ) TC 160 Glass in building TC 159 Ergonomics ISO 16932:2016 ISO 9241-12:1998 (replaced by ISO 9241-125:2017)

TC 207 Environmental management ISO 14050:2009 JTC 1 Information technology ISO/IEC (reconfirmed) 10746-1:1998 ISO/IEC (reconfirmed) 10746-4:1998 Meeting calendar ISO/IEC (reconfirmed) The meeting calendar is available at 13235-1:1998 https://www.iso.org/meeting-calendar.html ISO/IEC (reconfirmed) 13235-3:1998

ISO/IEC (reconfirmed) 15909-1:2004 ISO/IEC (reconfirmed) 16085:2006 ISO/IEC 25010:2011 ISO/IEC/IEEE 42010:2011

Standards withdrawn

Period from 01 August to 31 August 2017

TC 22 Road vehicles ISO 9458:1988 (replaced by ) TC 26 Copper and copper alloys ISO 3111:1975 (replaced by ) TC 35 Paints and varnishes ISO 4626:1980 (replaced by ) TC 44 Welding and allied processes ISO 7286:1986 (replaced by )

24 ISO Update, Supplement to ISO Focus -- September 2017