DOCSLIB.ORG

Proposed Work Program As of February 2021

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Proposed Work Program As of February 2021 BUREAU OF PHILIPPINE STANDARDS PROPOSED WORK PROGRAM AS OF FEBRUARY 2021 SUBJECT PROJECT REFERENCE STATUS STAGES OF DEVELOPMENT INTERNATIONAL TECHNICAL COMMITTEE [New/Revision 1. Preparatory CLASSIFICATION FOR (Amd./Cor.)/ 2. Organization Meeting STANDARDS Reconfirmation] 3. Drafting/Deliberation 4. Circulation 5. Finalization 6. Approval 7. Published BUILDING, CONSTRUCTION, MECHANICAL AND TRASPORTATION PRODUCTS BPS/TC 5 Concrete, Reinforced Concrete and Standard Specification for Grout for Masonry DPNS ASTM C476:2021 New Circulation 91.100.30 Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Standard Specification for Mortar for Unit Masonry DPNS ASTM C270:2021 New Circulation 91.100.30 Prestressed Concrete Standard Test Method for Flexural Strength of Concrete BPS/TC 5 Concrete, Reinforced Concrete and DPNS ASTM C78 / C78M:2021 New Circulation 91.100.30 (Using Simple Beam with Third-Point Loading) Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Terminology Relating to Concrete and Concrete Aggregates DPNS ASTM C125:2021 Revision Circulation 91.100.30 Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Practice for Capping Cylindrical Concrete Specimens DPNS ASTM C617/C617M:2021 New Circulation 91.100.30 Prestressed Concrete Practice for Preparing Precision and Bias Statements for BPS/TC 5 Concrete, Reinforced Concrete and DPNS ASTM C670:2021 New Circulation 91.100.30 Test Methods for Construction Materials Prestressed Concrete Practice for Agencies Testing Concrete and Concrete BPS/TC 5 Concrete, Reinforced Concrete and Aggregates for Use in Construction and Criteria for Testing DPNS ASTM C1077:2021 New Circulation 91.100.30 Prestressed Concrete Agency Evaluation Standard Test Method for Rebound Number of Hardened BPS/TC 5 Concrete, Reinforced Concrete and DPNS ASTM C805 / C805M:2021 New Circulation 91.100.30 Concrete Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Standard Test Method for Pulse Velocity Through Concrete DPNS ASTM C597:2021 New Circulation 91.100.30 Prestressed Concrete Test Method for Fundamental Transverse, Longitudinal, BPS/TC 5 Concrete, Reinforced Concrete and and Torsional Resonant Frequencies of Concrete DPNS ASTM C215:2021 New Circulation 91.100.30 Prestressed Concrete Specimens Practice for Examination and Sampling of Hardened BPS/TC 5 Concrete, Reinforced Concrete and DPNS ASTM C823-12:2021 New Circulation 91.100.30 Concrete in Constructions Prestressed Concrete Standard Test Method for Measuring Length of Concrete BPS/TC 5 Concrete, Reinforced Concrete and DPNS ASTM C1542 / C1542M:2021 New Circulation 91.100.30 Cores Prestressed Concrete Standard Test Method for Measuring Thickness of BPS/TC 5 Concrete, Reinforced Concrete and DPNS ASTM C174/C174M:2021 New Circulation 91.100.30 Concrete Elements Using Drilled Concrete Cores Prestressed Concrete Standard Test Method for Obtaining and Testing Drilled BPS/TC 5 Concrete, Reinforced Concrete and ASTM C1604 / C1604M - 05(2012) New Drafting/Deliberation 91.100.30 Cores of Shotcrete Prestressed Concrete Standard Test Method for Water Loss [from a Mortar BPS/TC 5 Concrete, Reinforced Concrete and Specimen] Through Liquid Membrane-Forming Curing ASTM C156 - 17 New Drafting/Deliberation 91.100.30 Prestressed Concrete Compounds for Concrete Standard Specification for Liquid Membrane-Forming BPS/TC 5 Concrete, Reinforced Concrete and ASTM C309 - 19 New Drafting/Deliberation 91.100.30 Compounds for Curing Concrete Prestressed Concrete Specification for Liquid Membrane-Forming Compounds BPS/TC 5 Concrete, Reinforced Concrete and ASTM C1315-19 New Drafting/Deliberation 91.100.30 Having Special Properties for Curing and Sealing Concrete Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Standard Specification for Admixtures for Shotcrete ASTM C1141 / C1141M - 15 New Preparatory 91.100.30 Prestressed Concrete Test Method for Color and Color-Difference Measurement BPS/TC 5 Concrete, Reinforced Concrete and ASTM E1347-06 (2018) New Preparatory 91.100.30 by Tristimulus Colorimetry Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Standard Test Method for Measurement of Solids in Water ASTM E1347-06 (2020) New Preparatory 91.100.30 Prestressed Concrete Practice for Preparing and Testing Specimens from BPS/TC 5 Concrete, Reinforced Concrete and ASTM C1603 - 16 New Preparatory 91.100.30 Shotcrete Test Panels* Prestressed Concrete Practice for Use of Unbonded Caps in Determination of BPS/TC 5 Concrete, Reinforced Concrete and ASTM C1140-11 (2019) New Preparatory 91.100.30 Compressive Strength of Hardened Cylindrical Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Concrete Specimens ASTM C1231/ C1231M-15 New Preparatory 91.100.30 Prestressed Concrete Environmental management for concrete and concrete BPS/TC 5 Concrete, Reinforced Concrete and ISO 13315-1:2012 New Preparatory 91.100.30 structures — Part 1: General principles Prestressed Concrete Environmental management for concrete and concrete BPS/TC 5 Concrete, Reinforced Concrete and ISO 13315-2:2014 New Preparatory 91.100.30 structures — Part 2: System boundary and inventory data Prestressed Concrete Environmental management for concrete and concrete BPS/TC 5 Concrete, Reinforced Concrete and structures — Part 4: Environmental design of concrete ISO 13315-4:2017 New Preparatory 91.100.30 Prestressed Concrete structures Environmental management for concrete and concrete BPS/TC 5 Concrete, Reinforced Concrete and ISO 13315-6:2019 New Preparatory 91.100.30 structures — Part 6: Use of concrete structures Prestressed Concrete Environmental management for concrete and concrete BPS/TC 5 Concrete, Reinforced Concrete and ISO 13315-8:2019 New Preparatory 91.100.30 structures — Part 8: Environmental labels and declarations Prestressed Concrete Test Methods for Physical Testing of Gypsum, Gypsum BPS/TC 5 Concrete, Reinforced Concrete and ASTM C472-20 New Preparatory 91.100.30 Plasters and Gypsum Concrete Prestressed Concrete Standard Test Method for Electrical Indication of Concrete’s BPS/TC 5 Concrete, Reinforced Concrete and ASTM C1202-19 New Preparatory 91.100.30 Ability to Resist Chloride Ion Penetration Prestressed Concrete Practice for Conducting an Interlaboratory Test Program to BPS/TC 5 Concrete, Reinforced Concrete and Determine the Precision of Test Methods for Construction ASTM C802-14 New Preparatory 91.100.30 Prestressed Concrete Materials Practice for Conducting an Interlaboratory Study to BPS/TC 5 Concrete, Reinforced Concrete and ASTM E691-19e1 New Preparatory 91.100.30 Determine the Precision of a Test Method Prestressed Concrete Standard Practice for Making and Curing Concrete Test BPS/TC 5 Concrete, Reinforced Concrete and ASTM C31-19a Revision Preparatory 91.100.30 Specimens in the Field Prestressed Concrete Liquefied petroleum gas regulators for domestic use - PNS 1961:2011 Revision Preparatory 23.060.40 BPS/TC 06 Gas cylinders Specification Gas cylinders -- Specifications and testing of LPG cylinder PNS ISO 15995:2013 Revision Preparatory 23.020.35 BPS/TC 06 Gas cylinders valves -- Manually operated Gas cylinders -- Specifications and testing of LPG cylinder PNS ISO 14245:2013 Revision Preparatory 23.020.35 BPS/TC 06 Gas cylinders valves -- Self-closing Gas cylinders — Transportable refillable welded steel ISO 22991:2004 New Preparatory 75.200 ; 23.020.35 BPS/TC 06 Gas cylinders cylinders for liquefied petroleum gas (LPG) — Design and construction Gas cylinders — Refillable composite gas cylinders — ISO 11119-4:2016 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners Gas cylinders — Non-refillable metallic gas cylinders — ISO 11118:2015 Revision Preparatory 23.020.35 BPS/TC 06 Gas cylinders Specification and test methods Gas cylinders — Non-refillable metallic gas cylinders — ISO 11118:2015/AMD 1:2019 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders Specification and test methods — Amendment 1 Gas cylinders — Compatibility of cylinder and valve ISO 11114-1:2012/AMD 1:2017 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders materials with gas contents — Part 1: Metallic materials — Amendment 1 Gas cylinders — Compatibility of cylinder and valve ISO 11114-2:2013 Revision Preparatory 23.020.35 BPS/TC 06 Gas cylinders materials with gas contents — Part 2: Non-metallic materials ISO 11114-3:2010 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere ISO 11114-4:2017 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 4: Test methods for selecting steels resistant to hydrogen embrittlement Gas cylinders — Compilation of national and international ISO/TR 11364:2019 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders valve stem/gas cylinder neck threads and their identification and marking system ISO 13341:2010 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders Gas cylinders — Fitting of valves to gas cylinders Gas cylinders — Fitting of valves to gas cylinders — ISO 13341:2010/AMD 1:2015 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders Amendment 1 Dimensions and tolerances of sawn timber (lumber) PNS 173:1992 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber Products Sawn Timber - Determination of the Average
Load more

Recommended publications
  • Isofocus #142
    #142 focusYour gateway to International Standards Innovation GENERATION 16 : ESA Photo ISOfocus September-October 2020 – ISSN 2226-1095 ISOfocus, the magazine of the International Organization for Standardization, is published six times a year. You can discover more content on our Website at iso.org/isofocus, or by staying connected with us on : TWITTER FACEBOOK YoutubeFlickrlinkedin Head of Communication | Vanessa Von der Mühll Editor-in-Chief | Elizabeth Gasiorowski-Denis 30 Writers | Ann Brady, Barnaby Lewis, Kath Lockett, Clare Naden, Roxanne Oclarino Copy editor and Proofreader | Vivienne Rojas Designers | Xela Damond, Pierre Granier, Alexane Rosa Translation team | Leïla Esteban, Alexandra Florent Subscriptions and back issues If you enjoy ISOfocus, you can download the pdf for free or subscribe to receive printed issues through our Website iso.org/isofocus. You can also contact our customer service at [email protected]. Contributions You can participate in creating this magazine. If you think your contribution can add value to any of our sections, please get in touch at [email protected]. Views expressed are those of the respective contributors and are not necessarily 38 those of ISO or any of its members. © ISO 2020 Published in Switzerland. All rights reserved. Articles in this magazine may be reproduced for non-commercial purposes only. These may not be modified and must be properly referenced, with due credit to ISO being given. ISO may revoke this permission at its sole discretion. For enquiries, please contact [email protected]. This magazine is printed on certified FSC ® paper. 46 #142 4 ISOfocusSeptember-October 2020 2-3 Innovating for a better future Comment by Sergio Mujica.
    [Show full text]
  • ISO Update Supplement to Isofocus
    ISO Update Supplement to ISOfocus October 2019 International Standards in process ISO/CD Agricultural and forestry tractors — Roll-over 12003-2 protective structures on narrow-track wheeled An International Standard is the result of an agreement between tractors — Part 2: Rear-mounted ROPS the member bodies of ISO. A first important step towards an Interna- TC 28 Petroleum and related products, fuels tional Standard takes the form of a committee draft (CD) - this is cir- and lubricants from natural or synthetic culated for study within an ISO technical committee. When consensus sources has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International ISO/CD 11009 Petroleum products and lubricants — Deter- Standard (DIS). The DIS requires approval by at least 75 % of the mination of water washout characteristics of member bodies casting a vote. A confirmation vote is subsequently lubricating greases carried out on a final draft International Standard (FDIS), the approval ISO/CD 13736 Determination of flash point — Abel closed-cup criteria remaining the same. method ISO/CD TR Petroleum products and other liquids — Guid- 29662 ance for flash point testing ISO/CD Lubricants, industrial oils and related prod- 12925-2 ucts (class L) — Family C (Gears) — Part 2: Specifications of categories CKH, CKJ and CKM (lubricants open and semi-enclosed gear systems) CD registered TC 29 Small tools ISO/CD 525 Bonded abrasive products — General requirements Period from 01 September to 01 October 2019 ISO/CD 5743 Pliers and nippers — General technical These documents are currently under consideration in the technical requirements committee.
    [Show full text]
  • Intelligent Transport Systems — Freight Land Conveyance Content Identification and Communication — Part 2: Application Interface Profiles
    This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-915851 INTERNATIONAL ISO STANDARD 26683-2 First edition 2013-02-15 Intelligent transport systems — Freight land conveyance content identification and communication — Part 2: Application interface profiles Systèmes intelligents de transport — Identification et communication du contenu des marchandises transportées par voie terrestre — Partie 2: Profils d’interface d’application Reference number ISO 26683-2:2013(E) © ISO 2013 This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-915851 ISO 26683-2:2013(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form orthe by requester. any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of ISOTel. copyright+ 41 22 749 office 01 11 CaseFax + postale 41 22 749 56 •09 CH-1211 47 Geneva 20 Web www.iso.org E-mail [email protected] Published in Switzerland ii © ISO 2013 – All rights reserved This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-915851 ISO 26683-2:2013(E) Contents Page Foreword ........................................................................................................................................................................................................................................iv
    [Show full text]
  • Liderazgo Biomimético Para Las Organizaciones Del Siglo XXI
    UNIVERSITAT POLITÈCNICA DE CATALUNYA (UPC) PROGRAMA DOCTORAL EN ADMINISTRACIÓN Y DIRECCIÓN DE EMPRESAS DEPARTAMENTO DE ORGANIZACIÓN DE EMPRESAS Tesis presentada para obtener el título de Doctora: Liderazgo biomimético para las organizaciones del siglo XXI Barcelona, julio 2020 Doctoranda: Edita Olaizola Director: Co-Director: Dr. Marcos Eguiguren Huerta Dr. Rafael Morales Sánchez Universitat Politècnica de Catalunya, Barcelona Universidad Pablo de Olavide, Sevilla Liderazgo biomimético para las organizaciones del siglo XXI Edita Olaizola ADVERTIMENT La consulta d’aquesta tesi queda condicionada a l’acceptació de les següents condicions d'ús: La difusió d’aquesta tesi per mitjà del repositori institucional UPCommons (http://upcommons.upc.edu/tesis) i el repositori cooperatiu TDX ( h t t p : / / w w w . t d x . c a t / ) ha estat autoritzada pels titulars dels drets de propietat intel·lectual únicament per a usos privats emmarcats en activitats d’investigació i docència. No s’autoritza la seva reproducció amb finalitats de lucre ni la seva difusió i posada a disposició des d’un lloc aliè al servei UPCommons o TDX. No s’autoritza la presentació del seu contingut en una finestra o marc aliè a UPCommons (framing). Aquesta reserva de drets afecta tant al resum de presentació de la tesi com als seus continguts. En la utilització o cita de parts de la tesi és obligat indicar el nom de la persona autora. ADVERTENCIA La consulta de esta tesis queda condicionada a la aceptación de las siguientes condiciones de uso: La difusión de esta tesis por medio del repositorio institucional UPCommons (http://upcommons.upc.edu/tesis) y el repositorio cooperativo TDR (http://www.tdx.cat/?locale- attribute=es) ha sido autorizada por los titulares de los derechos de propiedad intelectual únicamente para usos privados enmarcados en actividades de investigación y docencia.
    [Show full text]
  • WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018)
    WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018) Technical Committee No. 1 “Quality assurance and social responsibility”, 11 standards No. Standard number English title 1. EN ISO 22300:2018 Security and resilience - Vocabulary (ISO 22300:2018) 2. CEN/TS 17159:2018 Societal and citizen security - Guidance for the security of hazardous materials (CBRNE) in healthcare facilities 3. EN ISO 9004:2018 Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018) 4. CWA 17145-2:2017 Ethics assessment for research and innovation - Part 2: Ethical impact assessment framework 5. CWA 17145-1:2017 Ethics assessment for research and innovation - Part 1: Ethics committee 6. EN ISO 41011:2018 Facility management - Vocabulary (ISO 41011:2017) 7. EN ISO 41001:2018 Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018) 8. IWA 18:2016 Framework for integrated community-based life-long health and care services in aged societies 9. IWA 16:2015 International harmonized method(s) for a coherent quantification of CO2e emissions of freight transport 10. ISO/IEC Guide 17:2016 ISO/IEC Guide 17:2016Guide for writing standards taking into account the needs of micro, small and medium-sized enterprises 11. ISO 37500:2014 Guidance on outsourcing Technical Committee No. 3 “Electrical and electronical materials”, 59 standards No. Standard number English title 1. EN 50288-12-1:2017 Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - 1 Horizontal and building backbone cables 2.
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 2/2021
    Hrvatski zavod za norme Oglasnik za normativne dokumente 2/2021 28. YHOMDþH 2021. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije .................................................................................................. A3 1.1 Hrvatske norme ....................................................................................................................................... A3 1.2 Nacrti hrvatskih norma ............................................................................................................................ 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ................................................................................ A9 1.4 Povučene hrvatske norme ...................................................................................................................... A14 1.5 Povučeni nacrti hrvatskih norma ............................................................................................................. 1.6 Ispravci hrvatskih norma ........................................................................................................................
    [Show full text]
  • Mikko Soukka Area Layout Data Handling Solution for Container Terminals
    MIKKO SOUKKA AREA LAYOUT DATA HANDLING SOLUTION FOR CONTAINER TERMINALS Master of Science thesis Examiner: prof. Hannu Koivisto Examiner and topic approved by the Faculty of Engineering Sciences Council Meeting on 16th December 2015 i ABSTRACT MIKKO SOUKKA: Area Layout Data Handling Solution for Container Terminals Tampere University of technology Master of Science Thesis, 54 pages, 8 Appendix pages December 2015 Master’s Degree Programme in Automation Technology Major: Information Systems in Automation Examiner: Professor Hannu Koivisto Keywords: map visualization, information system, layout modeling This thesis studies on different solutions available on representing locational information in container terminals. Focus is given to creation of this data by using available design models of the container terminal. Main addressed issue was presented in Cargotec Finland Oy, under Kalmar brand. In Kalmar, several different solutions have been used to create this location data to represent the terminal. Different implementations of graphical user interface have been made by separate branches of the company, and each implementation utilizes differently structured data to represent the container terminal. Similarly, different control solutions of the terminal equipment require locational information, which is also separately defined on each use case. This thesis looks into current solutions and provides a new method utilizing a more uniform solution and increasing the level of automation of the process. The thesis is structured as a division of three parts. Firstly, the problem and container terminal are discussed in general level. This defines the background of the problem as well as variables to be taken into account. Secondly, current solutions from both Kalmar and other companies are described, and possible alternatives to these are also discussed.
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 3/2021
    Hrvatski zavod za norme Oglasnik za normativne dokumente 3/2021 31. RåXMND 2021. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije .................................................................................................. A3 1.1 Hrvatske norme ....................................................................................................................................... A3 1.2 Nacrti hrvatskih norma ............................................................................................................................ 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ................................................................................ A10 1.4 Povučene hrvatske norme ...................................................................................................................... A15 1.5 Povučeni nacrti hrvatskih norma ............................................................................................................. 1.6 Ispravci hrvatskih norma ........................................................................................................................
    [Show full text]
  • Business Resilience Standards Helping Businesses Address COVID-19 Related Economic Challenges
    INTERNATIONAL COOPERATION SEE QI Fund © istockphoto Business Resilience Standards Helping Businesses Address COVID-19 Related Economic Challenges Table of Contents About this Publication Introduction ..................................................................................................................................... 7 About the Authors........................................................................................................................... 8 Driton S. Bejtullahu..................................................................................................................... 8 Violeta Haxhillazi ........................................................................................................................ 8 Osman-Jablan Bulić ................................................................................................................... 9 Suzana Temelkoska ................................................................................................................... 9 Liridona Cani ............................................................................................................................ 10 Antigona Limani........................................................................................................................ 10 Chapter 1: Risk Management (Driton S. Bejtullahu) 1. Introduction ........................................................................................................................... 12 2. Complexity – a Reason for Increased Risks in Industry
    [Show full text]
  • ISO Update Supplement to Isofocus
    ISO Update Supplement to ISOfocus February 2020 International Standards in process ISO/DIS Milk — Definition and evaluation of the overall 8196-3 accuracy of alternative methods of milk analy- An International Standard is the result of an agreement between sis — Part 3: Protocol for the evaluation and the member bodies of ISO. A first important step towards an Interna- validation of alternative quantitative methods of tional Standard takes the form of a committee draft (CD) - this is cir- milk analysis culated for study within an ISO technical committee. When consensus ISO/CD 29981 Milk products — Enumeration of bifidobacteria has been reached within the technical committee, the document is — Colony count technique at 37 degrees C sent to the Central Secretariat for processing as a draft International TC 37 Language and terminology Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently ISO/CD 23155 Interpreting services — Conference interpreting carried out on a final draft International Standard (FDIS), the approval — Requirements and recommendations criteria remaining the same. TC 41 Pulleys and belts (including veebelts) ISO/CD 23586 Conveyor belts — Indentation rolling resistance related to belt width — Requirements, testing TC 43 Acoustics ISO/CD 10844 Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres ISO/CD 3382-3 Acoustics — Measurement of room acoustic CD registered parameters — Part 3: Open plan offices TC 45 Rubber and rubber products Period from 01 January to 01 February 2020 ISO/CD 8330 Rubber and plastics hoses and hose assem- blies — Vocabulary These documents are currently under consideration in the technical committee.
    [Show full text]
  • Responding to the Covid-19 Crisis Pathway to Business Continuity & Recovery
    RESPONDING TO THE COVID-19 CRISIS PATHWAY TO BUSINESS CONTINUITY & RECOVERY Guidance for Micro, Small and Medium Enterprises (MSMEs) INCLUSIVE AND SUSTAINABLE INDUSTRIAL DEVELOPMENT RESPONDING TO THE COVID-19 CRISIS PATHWAY TO BUSINESS CONTINUITY & RECOVERY Guidance for Micro, Small and Medium Enterprises (MSMEs) Vienna, Austria June 2020 www.unido.org DISCLAIMER This document has been produced without formal United Nations editing. The designations employed and the presentation of the material in this document do not imply the opinion of the Secretariat of the United Nations Industrial Development Organization (UNIDO) whatsoever concerning: the legal status of any country, territory, city or area or its authorities; the delimitation of its frontiers or boundaries; its economic system or degree of development. Designations such as “developed”, “industrialized” and “developing” are intended for statistical convenience and do not necessarily express a judgment about the stage reached by a particular country or area in the development process. The mention of firm names or commercial products does not constitute an endorsement by UNIDO. The opinions, figures and estimates set forth are the responsibility of the authors and therefore should not be considered as reflecting the views or carrying the endorsement of UNIDO. COMMENTS Comments and questions on issues raised in this report are welcome and may be addressed to [email protected] Copyright © by the United Nations Industrial Development Organization, 2020. © 2020 UNIDO - All rights reserved Images: © 2020 - www.unido.org, www.adobestock.com Layout: © 2020 - www.excelcis.com ACKNOWLEDGMENTS ACKNOWLEDGMENTS This document was prepared by the Department of This version has benefited from the valuable comments Digitalization, Technology and Innovation of the United provided by Ms.
    [Show full text]
  • 1 Iso/Iec 21118:2020 2 Iso/Iec 21471:2020 3 Iso
    Nr. Standard reference Title Information technology — Office equipment — Information to be 1 ISO/IEC 21118:2020 included in specification sheets for data projectors Information technology — Automatic identification and data capture 2 ISO/IEC 21471:2020 techniques — Extended rectangular data matrix (DMRE) bar code symbology specification Information technology — Cloud computing — Taxonomy based data 3 ISO/IEC 22624:2020 handling for cloud services Rolling bearings — Needle roller bearing track rollers — Boundary 4 ISO 7063:2018 dimensions, geometrical product specifications (GPS) and tolerance values Steel and cast iron — Determination of silicon content — Gravimetric 5 ISO 439:2020 method Steel — Determination of vanadium content — Flame atomic absorption 6 ISO 9647:2020 spectrometric method (FAAS) 7 ISO 21895:2020 Categorization and classification of civil unmanned aircraft systems Fire detection and fire alarm systems — Part 17: Transmission path 8 ISO 7240-17:2020 isolators Road vehicles — Unified diagnostic services (UDS) — Part 1: 9 ISO 14229-1:2020 Application layer Road vehicles — Clock extension peripheral interface (CXPI) — Part 2: 10 ISO 20794-2:2020 Application layer Road vehicles — Clock extension peripheral interface (CXPI) — Part 3: 11 ISO 20794-3:2020 Transport and network layer Road vehicles — Clock extension peripheral interface (CXPI) — Part 4: 12 ISO 20794-4:2020 Data link layer and physical layer Cinematography — Time and control code for 24, 25 and 30 frames per 13 ISO 9642:2020 second motion-picture film systems —
    [Show full text]