DOCSLIB.ORG

ISO Update Supplement to Isofocus

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

ISO Update Supplement to ISOfocus October 2019 International Standards in process ISO/CD Agricultural and forestry tractors — Roll-over 12003-2 protective structures on narrow-track wheeled An International Standard is the result of an agreement between tractors — Part 2: Rear-mounted ROPS the member bodies of ISO. A first important step towards an Interna- TC 28 Petroleum and related products, fuels tional Standard takes the form of a committee draft (CD) - this is cir- and lubricants from natural or synthetic culated for study within an ISO technical committee. When consensus sources has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International ISO/CD 11009 Petroleum products and lubricants — Deter- Standard (DIS). The DIS requires approval by at least 75 % of the mination of water washout characteristics of member bodies casting a vote. A confirmation vote is subsequently lubricating greases carried out on a final draft International Standard (FDIS), the approval ISO/CD 13736 Determination of flash point — Abel closed-cup criteria remaining the same. method ISO/CD TR Petroleum products and other liquids — Guid- 29662 ance for flash point testing ISO/CD Lubricants, industrial oils and related prod- 12925-2 ucts (class L) — Family C (Gears) — Part 2: Specifications of categories CKH, CKJ and CKM (lubricants open and semi-enclosed gear systems) CD registered TC 29 Small tools ISO/CD 525 Bonded abrasive products — General requirements Period from 01 September to 01 October 2019 ISO/CD 5743 Pliers and nippers — General technical These documents are currently under consideration in the technical requirements committee. TC 37 Language and terminology They have been registred at the Central Secretariat. ISO/CD Language resource management — Semantic 24617-11 annotation framework (SemAF) — Part 11: Measurable Quantitative information (MQI) TC 2 Fasteners ISO/CD Language resource management — Compre- ISO 898- Mechanical properties of fasteners made of 24627-3 hensive Annotation Framework (ComAF) — 3:2018/CD carbon steel and alloy steel — Part 3: Flat Part 3: Diagrammatic semantic authoring (DSA) Amd 1 washers with specified property classes — Amendment 1 ISO/CD PAS Simultaneous interpreting delivery platforms — 24019 Requirements and guidelines TC 5 Ferrous metal pipes and metallic fittings TC 43 Acoustics ISO/CD 8253-3 Acoustics — Audiometric test methods — Part ISO/CD 21052 Restrained joint system for Ductile Iron Pipe — 3: Speech audiometry Length Calculations of Restrained Pipes and Fittings TC 61 Plastics TC 8 Ships and marine technology ISO/CD TS Plastics - Method for exposing polyolefins 21488.2 outdoors combining natural and artificial ISO/CD Ballast water management systems (BWMS) irradiation 23314-2 — Risk assessment — Part 2: BWMS using electrolytic methods TC 68 Financial services ISO/CD 23668 Ships and marine technology — Marine envi- ISO/CD 9564-5 Banking — Personal Identification Number ronment protection — Continuous on-board pH (PIN) management and security — Part 5: monitoring method Methods for Generation, Change, and Verifica- TC 17 Steel tion of PINs and Associated Data ISO/DIS Calculation method of carbon dioxide emission TC 85 Nuclear energy, nuclear technologies, 14404-4 intensity from iron and steel production — Part and radiological protection 4: Guidance for using ISO 14404 family ISO/CD Radiological protection — Measurement for TC 20 Aircraft and space vehicles 19461-2 the clearance of waste contaminated with radioisotopes for medical application — Part ISO Space systems — Test procedure to evaluate 2: Management of solid radioactive waste in 11227:2012/ spacecraft material ejecta upon hypervelocity nuclear facilities CD Amd 1 impact — Amendment 1 TC 86 Refrigeration and air-conditioning ISO/CD UAS traffic management (UTM) — Part 7: UTM 23629-7 data and information transfer at interface of ISO/CD Water-source heat pumps — Testing and rating traffic management integration system and 13256-1 for performance — Part 1: Water-to-air and UAS service suppliers — Data model related to brine-to-air heat pumps spatial data for UAS and UTM ISO/CD Water-source heat pumps — Testing and rating TC 23 Tractors and machinery for agriculture 13256-2 for performance — Part 2: Water-to-water and and forestry brine-to-water heat pumps ISO/CD Agricultural and forestry tractors — Roll-over TC 92 Fire safety 12003-1 protective structures on narrow-track wheeled ISO/CD TR Fire safety engineering — Survey of perfor- tractors — Part 1: Front-mounted ROPS 20413 mance-based safety design practices in differ- ent countries ISO Update, Supplement to ISO Focus -- October 2019 1 TC 107 Metallic and other inorganic coatings ISO/CD Sterilization of health care products — Moist 17665.2 heat — Requirements for the development, ISO/CD 23131 Ellipsometry — Principles validation and routine control of a sterilization ISO/CD 23216 Carbon based films — Determination of optical process for medical devices property of amorphous carbon films by spec- troscopic ellipsometry TC 204 Intelligent transport systems ISO/CD Intelligent transport systems — Urban mobil- TC 108 Mechanical vibration, shock and condi- 18561-1 ity applications via nomadic device for green tion monitoring transport management — Part 1: General ISO/CD TR Mechanical vibration - Measurement and eval- requirements for data exchange between ITS 5349-3 uation of human exposure to hand-transmitted stations vibration — Part 3: Supplementary description TC 207 Environmental management of special signal forms ISO/CD 14097 Framework and principles for assessing and TC 110 Industrial trucks reporting investments and financing activities ISO 3691- Industrial trucks — Safety requirements and related to climate change 6:2013/CD verification — Part 6: Burden and personnel TC 211 Geographic information/Geomatics Amd 1 carriers — Amendment 1 ISO/CD 6709 Standard representation of geographic point TC 117 Fans location by coordinates ISO/CD TR Fans — Air curtain units — Part 3: Test meth- ISO/DTS Geographic information — Imagery sensor 27327-3 ods to determine energy effectiveness 19130-3 models for geopositioning — Part 3: Implemen- TC 121 Anaesthetic and respiratory equipment tation Schema ISO/DIS 4135 Anaesthetic and respiratory equipment — Vo- ISO/DTS Geographic information — Content compo- cabulary and semantics 19163-2 nents and encoding rules for imagery and gridded data — Part 2: Implementation schema TC 123 Plain bearings TC 213 Dimensional and geometrical product ISO/CD 14287 Plain bearings — Pad materials for tilting pad specifications and verification bearings ISO/CD Geometrical product specifications (GPS) — TC 127 Earth-moving machinery 25178-700 Surface texture: Areal — Part 700: Calibration, ISO/CD TS Earth-moving machinery — Collision warning adjustment and verification of areal topography 21815-2 and avoidance — Part 2: Part 2: On-board measuring instruments J1939 communication interface TC 215 Health informatics TC 136 Furniture IEC/DIS Application of risk management for IT-networks ISO/CD 7170 Furniture — Storage units — Test methods for 80001-1 incorporating medical devices — Part 1: Roles, the determination of strength, durability and responsibilities and activities stability IEC/CD Application of risk management for IT-networks TC 156 Corrosion of metals and alloys 80001-5-1 incorporating medical devices — Part 5-1: Activities in the product lifecycle ISO/CD 10270 Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in TC 216 Footwear nuclear power reactors ISO/CD 21061 Footwear — Chemical tests — Preparation of ISO/CD 23721 Corrosion of metals and alloys — Rating samples method of rust and stains of atmospheric cor- TC 221 Geosynthetics rosion for stainless steels ISO/CD TS Geosynthetics — Guidelines for the assess- TC 164 Mechanical testing of metals 13434 ment of durability ISO/CD 1352 Metallic materials — Torque-controlled fatigue TC 249 Traditional Chinese medicine testing ISO/CD Traditional Chinese Medicine-Vocabulary for TC 165 Timber structures 23961-1 Diagnostics — Part 1: Tongue ISO/CD 24323 Design methods for vibrational serviceability of ISO/CD Traditional Chinese Medicine-Vocabulary for timber floors 23961-2 Diagnostics — Part 2: Pulse TC 168 Prosthetics and orthotics TC 254 Safety of amusement rides and amuse- ISO/CD 8549-1 Prosthetics and orthotics — Vocabulary — Part ment devices 1: General terms for external limb prostheses and external orthoses ISO/CD Safety of amusement rides and amusement 17842-1 devices — Part 1: Design and manufacture ISO/CD 8549-2 Prosthetics and orthotics — Vocabulary — Part 2: Terms relating to external limb prostheses ISO/CD Safety of amusement rides and amusement and wearers of these prostheses 17842-2 devices — Part 2: Operation and use ISO/CD 8549-3 Prosthetics and orthotics — Vocabulary — Part ISO/CD Safety of amusement rides and amusement 3: Terms relating to external orthoses 17842-3 devices — Part 3: Requirements for inspection during design, manufacture, operation and use TC 184 Automation systems and integration ISO/CD Biomechanical effects on amusement ride ISO/CD 23218 Industrial automation systems and integration 17842-4 passengers — Part 4: Biomechanical effects on — Numerical Control System of Machine Tools amusement ride passengers — General Requirements TC 260 Human resource management ISO/DTS Data quality — Part 65: Data quality manage- 8000-65 ment: Process measurement questionnaire ISO/DTS Human Resource
Recommended publications
  • Wikipedia, the Free Encyclopedia 03-11-09 12:04

    Wikipedia, the Free Encyclopedia 03-11-09 12:04

    Tea - Wikipedia, the free encyclopedia 03-11-09 12:04 Tea From Wikipedia, the free encyclopedia Tea is the agricultural product of the leaves, leaf buds, and internodes of the Camellia sinensis plant, prepared and cured by various methods. "Tea" also refers to the aromatic beverage prepared from the cured leaves by combination with hot or boiling water,[1] and is the common name for the Camellia sinensis plant itself. After water, tea is the most widely-consumed beverage in the world.[2] It has a cooling, slightly bitter, astringent flavour which many enjoy.[3] The four types of tea most commonly found on the market are black tea, oolong tea, green tea and white tea,[4] all of which can be made from the same bushes, processed differently, and in the case of fine white tea grown differently. Pu-erh tea, a post-fermented tea, is also often classified as amongst the most popular types of tea.[5] Green Tea leaves in a Chinese The term "herbal tea" usually refers to an infusion or tisane of gaiwan. leaves, flowers, fruit, herbs or other plant material that contains no Camellia sinensis.[6] The term "red tea" either refers to an infusion made from the South African rooibos plant, also containing no Camellia sinensis, or, in Chinese, Korean, Japanese and other East Asian languages, refers to black tea. Contents 1 Traditional Chinese Tea Cultivation and Technologies 2 Processing and classification A tea bush. 3 Blending and additives 4 Content 5 Origin and history 5.1 Origin myths 5.2 China 5.3 Japan 5.4 Korea 5.5 Taiwan 5.6 Thailand 5.7 Vietnam 5.8 Tea spreads to the world 5.9 United Kingdom Plantation workers picking tea in 5.10 United States of America Tanzania.
  • Proposed Work Program As of February 2021

    Proposed Work Program As of February 2021

    BUREAU OF PHILIPPINE STANDARDS PROPOSED WORK PROGRAM AS OF FEBRUARY 2021 SUBJECT PROJECT REFERENCE STATUS STAGES OF DEVELOPMENT INTERNATIONAL TECHNICAL COMMITTEE [New/Revision 1. Preparatory CLASSIFICATION FOR (Amd./Cor.)/ 2. Organization Meeting STANDARDS Reconfirmation] 3. Drafting/Deliberation 4. Circulation 5. Finalization 6. Approval 7. Published BUILDING, CONSTRUCTION, MECHANICAL AND TRASPORTATION PRODUCTS BPS/TC 5 Concrete, Reinforced Concrete and Standard Specification for Grout for Masonry DPNS ASTM C476:2021 New Circulation 91.100.30 Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Standard Specification for Mortar for Unit Masonry DPNS ASTM C270:2021 New Circulation 91.100.30 Prestressed Concrete Standard Test Method for Flexural Strength of Concrete BPS/TC 5 Concrete, Reinforced Concrete and DPNS ASTM C78 / C78M:2021 New Circulation 91.100.30 (Using Simple Beam with Third-Point Loading) Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Terminology Relating to Concrete and Concrete Aggregates DPNS ASTM C125:2021 Revision Circulation 91.100.30 Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Practice for Capping Cylindrical Concrete Specimens DPNS ASTM C617/C617M:2021 New Circulation 91.100.30 Prestressed Concrete Practice for Preparing Precision and Bias Statements for BPS/TC 5 Concrete, Reinforced Concrete and DPNS ASTM C670:2021 New Circulation 91.100.30 Test Methods for Construction Materials Prestressed Concrete Practice for Agencies Testing Concrete and Concrete BPS/TC 5 Concrete,
  • Aportes De La Academia Al Desarrollo Local Y Regional

    Aportes De La Academia Al Desarrollo Local Y Regional

    APORTES DE LA ACADEMIA AL DESARROLLO LOCAL Y REGIONAL El presente trabajo es el resultado de un esfuerzo mancomunado y cooperativo Experiencias en América Latina llevado a cabo entre Universidades que trabajan de manera comprometida y sos- Mario José Mantulak Stachuk (Comp.) Juan Carlos Michalus Jusczysczyn (Comp.) (Comp.) Valdés Juan Esteban Miño tenida para el desarrollo local y regional. El mismo incorpora la diversidad de apor- tes provenientes de la academia en rela- ción con diferentes actividades producti- vas vinculadas a la gestión de recursos tecnológicos, las redes de cooperación flexible, las cadenas de valor agropecua- rias, la gestión del conocimiento y la tecnología, la asociatividad entre PyMEs, Mario José Mantulak Stachuk (Comp.) así como las redes empresariales para la Juan Carlos Michalus Jusczysczyn (Comp.) innovación. Juan Esteban Miño Valdés (Comp.) APORTES DE LA ACADEMIA AL DESARROLLO LOCAL Y REGIONAL 9 789505 793662 Mario José Mantulak Stachuk (Comp.) Juan Carlos Michalus Jusczysczyn (Comp.) Juan Esteban Miño Valdés (Comp.) APORTES DE LA ACADEMIA AL DESARROLLO LOCAL Y REGIONAL EDITORIAL UNIVERSITARIA UNIVERSIDAD NACIONAL DE MISIONES Coronel José Félix Bogado 2160 Posadas - Misiones - Tel-Fax: (0376) 4428601 Correo electrónico: [email protected] Coordinación de la edición: Claudio O. Zalazar Armado de interior: Francisco A. Sánchez Tapa: Martín D. Villalba Mario José Mantulak Stachuk; Juan Carlos Michalus Jusczysczyn; Juan Esteban Miño Valdés (Compiladores) Aporte de la Academia al desarrollo local y regional: experiencias en América Latina. - 1a ed. - Posadas: EdUNaM - Editorial Universitaria de la Universidad Nacional de Misiones, 2014. 168 p.; 22x15 cm. ISBN 978-950-579-366-2 1. Desarrollo Regional.
  • Intelligent Transport Systems — Freight Land Conveyance Content Identification and Communication — Part 2: Application Interface Profiles

    Intelligent Transport Systems — Freight Land Conveyance Content Identification and Communication — Part 2: Application Interface Profiles

    This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-915851 INTERNATIONAL ISO STANDARD 26683-2 First edition 2013-02-15 Intelligent transport systems — Freight land conveyance content identification and communication — Part 2: Application interface profiles Systèmes intelligents de transport — Identification et communication du contenu des marchandises transportées par voie terrestre — Partie 2: Profils d’interface d’application Reference number ISO 26683-2:2013(E) © ISO 2013 This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-915851 ISO 26683-2:2013(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form orthe by requester. any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of ISOTel. copyright+ 41 22 749 office 01 11 CaseFax + postale 41 22 749 56 •09 CH-1211 47 Geneva 20 Web www.iso.org E-mail [email protected] Published in Switzerland ii © ISO 2013 – All rights reserved This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-915851 ISO 26683-2:2013(E) Contents Page Foreword ........................................................................................................................................................................................................................................iv
  • ISO Standards for Tea

    ISO Standards for Tea

    ISO Standards for Tea Intergovernmental Group- on Tea 10th Session New Dehli, 12-14 May 2010 Andrew Scott, Chairman ISO TC/34 SC 8 Tea 1 2 Tea Over 3 million tonnes produced In over 30 countries Providing over 1000 billion cups of tea 3 International Standards for Tea International standards are vital to facilitate international trade To ensure consumer expectations are met To provide guidance and common understanding of Good Manufacturing practices via compositional specifications To provide validated methods of analysis 4 International Standards for Tea 1970’s - Tea Committee became ISO Working Group 8 - ISO Technical Committee 34 Sub-committee 8 – Tea 1977 - ISO 3720 Black tea standard 8 testing methods to measure basic tea parameters 1980 - ISO 1839 Sampling tea 1980 - ISO 3103 Preparation of liquor for sensory analysis 1982 - Glossary of terms 1990 - Instant tea standard 4 supporting test methods 5 …. why measure polyphenols in tea? 6 ISO BLACK TEA SPECIFICATION - ISO 3720 1977 (First edition) “INTRODUCTION The content of CAFFEINE and the content of POLYPHENOLIC constituents are important chemical characteristics of black tea, but it has not been possible to include limits for either of them in the specification. In the case of CAFFEINE, agreement has not yet been reached on a standard method for the determination. In the case of POLYPHENOLIC CONSTITUENTS, knowledge about test methods is not sufficiently developed to justify the standardization of any one of the methods in existence; moreover, information on the content of these
  • Iso 898-1:2009(E)

    Iso 898-1:2009(E)

    INTERNATIONAL ISO STANDARD 898-1 Fourth edition 2009-04-01 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread Caractéristiques mécaniques des éléments de fixation en acier au carbone et en acier allié — Partie 1: Vis, goujons et tiges filetées de classes de qualité spécifiées — Filetages à pas gros et filetages à pas fin Reference number ISO 898-1:2009(E) © ISO 2009 ISO 898-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT © ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester.
  • Iso 898-1:2009(E)

    Iso 898-1:2009(E)

    This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-910885 INTERNATIONAL ISO STANDARD 898-1 Fourth edition 2009-04-01 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread Caractéristiques mécaniques des éléments de fixation en acier au carbone et en acier allié — Partie 1: Vis, goujons et tiges filetées de classes de qualité spécifiées — Filetages à pas gros et filetages à pas fin Reference number ISO 898-1:2009(E) © ISO 2009 This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-910885 ISO 898-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
  • News Iso Standards: 2013/12

    News Iso Standards: 2013/12

    NEWS ISO STANDARDS: 2013/12 ISO/IEC 2382-4: 1999 150.80 € ISO/IEC 2382-4 Information technology -- Vocabulary -- Part 4: Buy Organization of data ISO/IEC 17000: 2004 200.20 € ISO/IEC 17000 Conformity assessment -- Vocabulary and general Buy principles ISO 3167: 2002 85.80 € ISO 3167 Plastics -- Multipurpose test specimens Buy ISO/IEC 23008-2: 2013 309.40 € ISO/IEC 23008-2 Information technology -- High efficiency coding and Buy media delivery in heterogeneous environments -- Part 2: High efficiency video coding ISO 3297: 2007 127.40 € ISO 3297 Information and documentation -- International standard Buy serial number (ISSN) ISO 9912-2: 2013 85.80 € ISO 9912-2 Agricultural irrigation equipment -- Filters for microirrigation Buy -- Part 2: Strainer-type filters and disc filters ISO 9912-3: 2013 75.40 € ISO 9912-3 Agricultural irrigation equipment -- Filters for microirrigation Buy -- Part 3: Automatic flushing strainer-type filters and disc filters ISO 10957: 2009 104.00 € ISO 10957 Information and documentation -- International standard Buy music number (ISMN) ISO 17992: 2013 119.60 € ISO 17992 Iron ores -- Determination of arsenic content -- Hydride Buy generation atomic absorption spectrometric method ISO 11783-14: 2013 223.60 € ISO 11783-14 Tractors and machinery for agriculture and forestry -- Buy Serial control and communications data network -- Part 14: Sequence control ISO 27729: 2012 111.80 € ISO 27729 Information and documentation -- International standard Buy name identifier (ISNI) ISO 27730: 2012 85.80 € ISO 27730 Information
  • Mikko Soukka Area Layout Data Handling Solution for Container Terminals

    Mikko Soukka Area Layout Data Handling Solution for Container Terminals

    MIKKO SOUKKA AREA LAYOUT DATA HANDLING SOLUTION FOR CONTAINER TERMINALS Master of Science thesis Examiner: prof. Hannu Koivisto Examiner and topic approved by the Faculty of Engineering Sciences Council Meeting on 16th December 2015 i ABSTRACT MIKKO SOUKKA: Area Layout Data Handling Solution for Container Terminals Tampere University of technology Master of Science Thesis, 54 pages, 8 Appendix pages December 2015 Master’s Degree Programme in Automation Technology Major: Information Systems in Automation Examiner: Professor Hannu Koivisto Keywords: map visualization, information system, layout modeling This thesis studies on different solutions available on representing locational information in container terminals. Focus is given to creation of this data by using available design models of the container terminal. Main addressed issue was presented in Cargotec Finland Oy, under Kalmar brand. In Kalmar, several different solutions have been used to create this location data to represent the terminal. Different implementations of graphical user interface have been made by separate branches of the company, and each implementation utilizes differently structured data to represent the container terminal. Similarly, different control solutions of the terminal equipment require locational information, which is also separately defined on each use case. This thesis looks into current solutions and provides a new method utilizing a more uniform solution and increasing the level of automation of the process. The thesis is structured as a division of three parts. Firstly, the problem and container terminal are discussed in general level. This defines the background of the problem as well as variables to be taken into account. Secondly, current solutions from both Kalmar and other companies are described, and possible alternatives to these are also discussed.
  • List of Standards Approved for Confirmations Withdrawals June 2018

    List of Standards Approved for Confirmations Withdrawals June 2018

    LIST FOR CONFIRMATIONS AND WITHDRAWALS APPROVED BY THE 119TH STANDARDS APPROVAL COMMITTEE MEETING ON 29TH JUNE 2018 CHEMICAL DEPARTMENT CONFIRMATIONS 1. KS ISO 16000-18:2011 Kenya Standard — Indoor air Part 18: Detection and enumeration of moulds — Sampling by impaction 2. KS 1998:2007 Kenya Standard — Marking pens for writing and drawing — Specification 3. KS 2031:2007 Kenya Standard — Radioactive waste — Disposal by the user — Code of practice. 4. KS 619:1985 Kenya Standard — Methods of test for printing inks 5. KS EAS 751:2010 Kenya Standard — Air quality — Specification 6. KS EAS 752:2010 Kenya Standard — Air quality — Tolerance limits of emissions discharged to the air by factories 7. KS ISO 12040:1997 Kenya Standard — Graphic technology — Prints and printing inks assessment of light fastness using filtered xenon arc light 8. KS ISO 12636:1998 Kenya Standard — Graphic technology — Blankets for offset printing. 9. KS ISO 13655:1996 Kenya Standard — Graphic technology — Spectral measurement and calorimetric computation for graphic arts images 10. KS ISO 16000-17:2008 Kenya Standard — Indoor air Part 17: Detection and enumeration of moulds-Culture-based method 11. KS ISO 16702:2007 Kenya Standard — Workplace air quality — Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography. 12. KS ISO 24095:2009 Kenya Standard — Workplace air-Guidance for the measurement of respirable crystalline silica 13. KS ISO 2846-2:2007 Kenya Standard — Graphic technology — Colour and transparency of printing ink sets for four-colour printing Part 2: Coldset offset lithographic printing 14. KS ISO 2846-3:2002 Kenya Standard — Graphic technology — Colour and transparency of ink sets for four-colour-printing Part 3: Publication gravure printing.
  • Iso 898-1:2013(E)

    Iso 898-1:2013(E)

    INTERNATIONAL ISO STANDARD 898-1 Fifth edition 2013-01-15 Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread Caractéristiques mécaniques des éléments de fixation en acier au carbone et en acier allié Partie 1: Vis, goujons et tiges filetées de classes de qualité spécifiées — Filetages à pas gros et filetages à pas fin Reference number ISO 898-1:2013(E) © ISO 2013 ISO 898-1:2013(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org Published in Switzerland ii © ISO 2013 – All rights reserved ISO 898-1:2013(E) Contents Page Foreword ............................................................................................................................................................iv 1 Scope ......................................................................................................................................................1 2 Normative references............................................................................................................................2
  • Nummernverzeichnis Der Behandelten Normen

    Nummernverzeichnis Der Behandelten Normen

    Nummernverzeichnis der behandelten Normen DIN Seite DIN Seite DIN Seite DIN 6-1 83 DIN 244 250 DIN 669 497 DIN 6-2 83 DIN 254* 94 DIN 670 497 DIN 13 252 DIN 267-2 339,340 DIN 671 497 DIN 13-1* 253 DIN 267-6 340 DIN 705 188 DIN 13-2* 253 DIN 267-10 340 DIN 720 189 DIN 13-3* 253 DIN 267-13 340 DIN 747 169 DIN 13-4* 253 DIN 267-24 340 DIN 748 170 DIN 13-5* 253 DIN 316 370 DIN 748-3 853 DIN 13-6* 254 DIN 319 237 DIN 780-1 209 DIN 13-7* 255 DIN 322 205 DIN 780-2 209 DIN 13-8* 255 DIN 323-1 20 DIN 781 272 DIN 13-9* 255 DIN 323-2 20 DIN 803 273 DIN 13-10* 255 DIN 332 148 DIN 804 274 DIN 13-11* 255 DIN 336 266 DIN 820-1 14,17 DIN 34* 82 DIN 405-1* 266 DIN 820-2 18,19 DIN 39 236 DIN 406-10 89 DIN 820-4 17 DIN 66 357 DIN 406-11 89 DIN 820-12 1025 DIN 74-1* 358 DIN 406-12 89 DIN 824 82 DIN 76-1 143 DIN 432 394 DIN 835 367 DIN 78 145 DIN 442 241 DIN 876 208 DIN 79 164 DIN 443 241 DIN 908 372 DIN 82 148 DIN 444 371 DIN 909 372 DIN 93 393 DIN 461 136 DIN 910 372 DIN 95 377 DIN 463 394 DIN 913 368 DIN 96 377 DIN 470 241 DIN 914 368 DIN 97 377 DIN 471 395 DIN 915 368 DIN 98* 236 DIN 472 395 DIN 916 368 DIN 99* 238 DIN 475 164 DIN 935 387 DIN 102 336 DIN 475-1 164 DIN 935-1* 387 DIN 103-1 263 DIN 475-2 164 DIN 938-2* 367 DIN 103-2 263 DIN 476-1 78 DIN 950* 234 DIN 103-3 263 DIN 476-2 78 DIN 974-1 359 DIN 103-4 263 DIN 502 206 DIN 974-2 359 DIN 109-1 173 DIN 504 206 DIN 979 387 DIN 109-2 173 DIN 505 206 DIN 988 207 DIN 111 173 DIN 509 149 DIN 1013-1 489 DIN 115-1 176 DIN 513-1 265 DIN 1013-2 489 DIN 115-2 176 DIN 513-2 265 DIN 1014-1 489 DIN 116 174 DIN