Proposed Work Program As of June 2021

Total Page:16

File Type:pdf, Size:1020Kb

Proposed Work Program As of June 2021 BUREAU OF PHILIPPINE STANDARDS PROPOSED WORK PROGRAM AS OF JUNE 2021 SUBJECT PROJECT REFERENCE STATUS STAGES OF DEVELOPMENT ICS TECHNICAL COMMITTEE [New/Revision 1. Preparatory (Amd./Cor.)/ 2. Organization Meeting Reconfirmation] 3. Drafting/Deliberation 4. Circulation 5. Finalization 6. Approval 7. Published BUILDING, CONSTRUCTION, MECHANICAL AND TRASPORTATION PRODUCTS Standard Specification for Grout for Masonry BPS/TC 5 Concrete, Reinforced Concrete and ASTM C476:2021 New Finalization 91.100.30 Prestressed Concrete Standard Specification for Mortar for Unit Masonry BPS/TC 5 Concrete, Reinforced Concrete and ASTM C270:2021 New Finalization 91.100.30 Prestressed Concrete Standard Test Method for Flexural Strength of Concrete BPS/TC 5 Concrete, Reinforced Concrete and ASTM C78 / C78M:2021 New Finalization 91.100.30 (Using Simple Beam with Third-Point Loading) Prestressed Concrete Terminology Relating to Concrete and Concrete Aggregates BPS/TC 5 Concrete, Reinforced Concrete and PNS ASTM C125:2018 Revision Finalization 91.100.30 Prestressed Concrete Practice for Capping Cylindrical Concrete Specimens BPS/TC 5 Concrete, Reinforced Concrete and ASTM C617/C617M:2021 New Finalization 91.100.30 Prestressed Concrete Practice for Preparing Precision and Bias Statements for BPS/TC 5 Concrete, Reinforced Concrete and ASTM C670:2021 New Finalization 91.100.30 Test Methods for Construction Materials Prestressed Concrete Practice for Agencies Testing Concrete and Concrete BPS/TC 5 Concrete, Reinforced Concrete and Aggregates for Use in Construction and Criteria for Testing ASTM C1077:2021 New Finalization 91.100.30 Prestressed Concrete Agency Evaluation Standard Test Method for Rebound Number of Hardened BPS/TC 5 Concrete, Reinforced Concrete and ASTM C805 / C805M:2021 New Finalization 91.100.30 Concrete Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and ASTM C597:2021 New Finalization 91.100.30 Standard Test Method for Pulse Velocity Through Concrete Prestressed Concrete Test Method for Fundamental Transverse, Longitudinal, BPS/TC 5 Concrete, Reinforced Concrete and and Torsional Resonant Frequencies of Concrete ASTM C215:2021 New Finalization 91.100.30 Prestressed Concrete Specimens Practice for Examination and Sampling of Hardened BPS/TC 5 Concrete, Reinforced Concrete and ASTM C823-12:2021 New Finalization 91.100.30 Concrete in Constructions Prestressed Concrete Standard Test Method for Measuring Length of Concrete BPS/TC 5 Concrete, Reinforced Concrete and ASTM C1542 / C1542M:2021 New Finalization 91.100.30 Cores Prestressed Concrete Standard Test Method for Measuring Thickness of BPS/TC 5 Concrete, Reinforced Concrete and ASTM C174/C174M:2021 New Finalization 91.100.30 Concrete Elements Using Drilled Concrete Cores Prestressed Concrete Standard Test Method for Obtaining and Testing Drilled BPS/TC 5 Concrete, Reinforced Concrete and ASTM C1604 / C1604M - 05(2012) New Finalization 91.100.30 Cores of Shotcrete Prestressed Concrete Standard Test Method for Water Loss [from a Mortar BPS/TC 5 Concrete, Reinforced Concrete and Specimen] Through Liquid Membrane-Forming Curing ASTM C156 - 17 New Drafting/Deliberation 91.100.30 Prestressed Concrete Compounds for Concrete Standard Specification for Liquid Membrane-Forming BPS/TC 5 Concrete, Reinforced Concrete and ASTM C309 - 19 New Circulation 91.100.30 Compounds for Curing Concrete Prestressed Concrete Specification for Liquid Membrane-Forming Compounds BPS/TC 5 Concrete, Reinforced Concrete and ASTM C1315-19 New Circulation 91.100.30 Having Special Properties for Curing and Sealing Concrete Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Standard Specification for Admixtures for Shotcrete ASTM C1141 / C1141M - 15 New Circulation 91.100.30 Prestressed Concrete Test Method for Color and Color-Difference Measurement BPS/TC 5 Concrete, Reinforced Concrete and ASTM E1347-06 (2018) New Circulation 91.100.30 by Tristimulus Colorimetry Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Standard Test Method for Measurement of Solids in Water ASTM C1603 - 16 New Circulation 91.100.30 Prestressed Concrete Practice for Preparing and Testing Specimens from BPS/TC 5 Concrete, Reinforced Concrete and ASTM C1140-11 (2019) New Circulation 91.100.30 Shotcrete Test Panels* Prestressed Concrete Practice for Use of Unbonded Caps in Determination of BPS/TC 5 Concrete, Reinforced Concrete and Compressive Strength of Hardened Cylindrical Concrete ASTM C1231/ C1231M-15 New Circulation 91.100.30 Prestressed Concrete Specimens Environmental management for concrete and concrete BPS/TC 5 Concrete, Reinforced Concrete and ISO 13315-1:2012 New Drafting/Deliberation 91.100.30 structures — Part 1: General principles Prestressed Concrete Environmental management for concrete and concrete BPS/TC 5 Concrete, Reinforced Concrete and ISO 13315-2:2014 New Drafting/Deliberation 91.100.30 structures — Part 2: System boundary and inventory data Prestressed Concrete Environmental management for concrete and concrete BPS/TC 5 Concrete, Reinforced Concrete and structures — Part 4: Environmental design of concrete ISO 13315-4:2017 New Preparatory 91.100.30 Prestressed Concrete structures Environmental management for concrete and concrete BPS/TC 5 Concrete, Reinforced Concrete and ISO 13315-6:2019 New Preparatory 91.100.30 structures — Part 6: Use of concrete structures Prestressed Concrete Environmental management for concrete and concrete BPS/TC 5 Concrete, Reinforced Concrete and ISO 13315-8:2019 New Preparatory 91.100.30 structures — Part 8: Environmental labels and declarations Prestressed Concrete Test Methods for Physical Testing of Gypsum, Gypsum BPS/TC 5 Concrete, Reinforced Concrete and ASTM C472-20 New Preparatory 91.100.30 Plasters and Gypsum Concrete Prestressed Concrete Standard Test Method for Electrical Indication of Concrete’s BPS/TC 5 Concrete, Reinforced Concrete and ASTM C1202-19 New Preparatory 91.100.30 Ability to Resist Chloride Ion Penetration Prestressed Concrete Practice for Conducting an Interlaboratory Test Program to BPS/TC 5 Concrete, Reinforced Concrete and Determine the Precision of Test Methods for Construction ASTM C802-14 New Preparatory 91.100.30 Prestressed Concrete Materials Practice for Conducting an Interlaboratory Study to BPS/TC 5 Concrete, Reinforced Concrete and ASTM E691-19e1 New Preparatory 91.100.30 Determine the Precision of a Test Method Prestressed Concrete Standard Practice for Making and Curing Concrete Test BPS/TC 5 Concrete, Reinforced Concrete and ASTM C31-19a Revision Preparatory 91.100.30 Specimens in the Field Prestressed Concrete Standard Test Method for Density, Absorption, and Voids in BPS/TC 5 Concrete, Reinforced Concrete and ASTM C642-13 New Preparatory 91.100.30 Hardened Concrete Prestressed Concrete Standard Specification for Sheet Materials for Curing BPS/TC 5 Concrete, Reinforced Concrete and ASTM C171-20 New Preparatory 91.100.30 Concrete Prestressed Concrete Transportable and refillable welded steel cylinders for DPNS 03-1:2020 Revision Published 23.020.30 BPS/TC 06 Gas cylinders liquefied petroleum gas (LPG) – Part 1: Specification Transportable and refillable welded steel cylinders for DPNS 03-2:2020 Revision Published 23.020.30 BPS/TC 06 Gas cylinders liquefied petroleum gas (LPG) – Part 2: Methods of Requalification Transportable and refillable welded steel cylinders for DPNS 03-3:2020 Revision Published 23.020.30 BPS/TC 06 Gas cylinders liquefied petroleum gas (LPG) – Part 3: Requirements for repair Liquefied petroleum gas regulators for domestic use - PNS 1961:2011 Revision Drafting 23.060.40 BPS/TC 06 Gas cylinders Specification Gas cylinders -- Specifications and testing of LPG cylinder PNS ISO 15995:2013 Revision Preparatory 23.020.35 BPS/TC 06 Gas cylinders valves -- Manually operated Gas cylinders -- Specifications and testing of LPG cylinder PNS ISO 14245:2013 Revision Preparatory 23.020.35 BPS/TC 06 Gas cylinders valves -- Self-closing Gas cylinders — Transportable refillable welded steel ISO 22991:2004 New Preparatory 75.200 ; 23.020.35 BPS/TC 06 Gas cylinders cylinders for liquefied petroleum gas (LPG) — Design and construction Gas cylinders — Refillable composite gas cylinders — ISO 11119-4:2016 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners Gas cylinders — Non-refillable metallic gas cylinders — ISO 11118:2015 Revision Preparatory 23.020.35 BPS/TC 06 Gas cylinders Specification and test methods Gas cylinders — Non-refillable metallic gas cylinders — ISO 11118:2015/AMD 1:2019 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders Specification and test methods — Amendment 1 Gas cylinders — Compatibility of cylinder and valve ISO 11114-1:2012/AMD 1:2017 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders materials with gas contents — Part 1: Metallic materials — Amendment 1 Gas cylinders — Compatibility of cylinder and valve ISO 11114-2:2013 Revision Preparatory 23.020.35 BPS/TC 06 Gas cylinders materials with gas contents — Part 2: Non-metallic materials Gas cylinders — Compatibility of cylinder and valve ISO 11114-3:2010 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders materials with gas contents — Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere Transportable gas cylinders — Compatibility of cylinder and ISO 11114-4:2017 New Preparatory 23.020.35 BPS/TC 06 Gas cylinders valve materials with gas contents — Part 4: Test methods
Recommended publications
  • NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 1.0
    NIST Special Publication 1108 NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 1.0 Office of the National Coordinator for Smart Grid Interoperability NIST Special Publication 1108 NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 1.0 Office of the National Coordinator for Smart Grid Interoperability January 2010 U.S. Department of Commerce Gary Locke, Secretary National Institute of Standards and Technology Patrick D. Gallagher, Director Table of Contents Executive Summary........................................................................................................................ 7 1 Purpose and Scope .................................................................................................................. 13 1.1 Overview and Background............................................................................................. 13 1.2 How This Report Was Produced.................................................................................... 16 1.3 Key Concepts ................................................................................................................. 18 1.3.1 Definitions............................................................................................................... 19 1.3.2 Applications and Requirements: Eight Priority Areas............................................ 20 1.4 Content Overview .......................................................................................................... 21 2 Smart Grid Vision..................................................................................................................
    [Show full text]
  • Proposed Work Program As of February 2021
    BUREAU OF PHILIPPINE STANDARDS PROPOSED WORK PROGRAM AS OF FEBRUARY 2021 SUBJECT PROJECT REFERENCE STATUS STAGES OF DEVELOPMENT INTERNATIONAL TECHNICAL COMMITTEE [New/Revision 1. Preparatory CLASSIFICATION FOR (Amd./Cor.)/ 2. Organization Meeting STANDARDS Reconfirmation] 3. Drafting/Deliberation 4. Circulation 5. Finalization 6. Approval 7. Published BUILDING, CONSTRUCTION, MECHANICAL AND TRASPORTATION PRODUCTS BPS/TC 5 Concrete, Reinforced Concrete and Standard Specification for Grout for Masonry DPNS ASTM C476:2021 New Circulation 91.100.30 Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Standard Specification for Mortar for Unit Masonry DPNS ASTM C270:2021 New Circulation 91.100.30 Prestressed Concrete Standard Test Method for Flexural Strength of Concrete BPS/TC 5 Concrete, Reinforced Concrete and DPNS ASTM C78 / C78M:2021 New Circulation 91.100.30 (Using Simple Beam with Third-Point Loading) Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Terminology Relating to Concrete and Concrete Aggregates DPNS ASTM C125:2021 Revision Circulation 91.100.30 Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Practice for Capping Cylindrical Concrete Specimens DPNS ASTM C617/C617M:2021 New Circulation 91.100.30 Prestressed Concrete Practice for Preparing Precision and Bias Statements for BPS/TC 5 Concrete, Reinforced Concrete and DPNS ASTM C670:2021 New Circulation 91.100.30 Test Methods for Construction Materials Prestressed Concrete Practice for Agencies Testing Concrete and Concrete BPS/TC 5 Concrete,
    [Show full text]
  • 750-641 DALI/DSI Master Module of the Modular WAGO-I/O-SYSTEM 750
    Fieldbus Independent I/O Modules DALI/DSI Master Module 750-641 Manual Version 1.1.2 ii • General Copyright © 2005 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 – 1 69 E-Mail: [email protected] Web: http://www.wago.com Technical Support Phone: +49 (0) 571/8 87 – 5 55 Fax: +49 (0) 571/8 87 – 85 55 E-Mail: [email protected] Every conceivable measure has been taken to ensure the correctness and com- pleteness of this documentation. However, as errors can never be fully ex- cluded, we would appreciate any information or ideas at any time. E-Mail: [email protected] We wish to point out that the software and hardware terms as well as the trademarks of companies used and/or mentioned in the present manual are generally trademark or patent protected. WAGO-I/O-SYSTEM 750 I/O Modules Content • iii CONTENT 1 Important Comments .................................................................................4 1.1 Legal Principles........................................................................................4 1.1.1 Copyright .............................................................................................4 1.1.2 Personnel Qualification.......................................................................4 1.1.3 Intended Use........................................................................................4 1.2 Symbols ....................................................................................................5
    [Show full text]
  • WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018)
    WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018) Technical Committee No. 1 “Quality assurance and social responsibility”, 11 standards No. Standard number English title 1. EN ISO 22300:2018 Security and resilience - Vocabulary (ISO 22300:2018) 2. CEN/TS 17159:2018 Societal and citizen security - Guidance for the security of hazardous materials (CBRNE) in healthcare facilities 3. EN ISO 9004:2018 Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018) 4. CWA 17145-2:2017 Ethics assessment for research and innovation - Part 2: Ethical impact assessment framework 5. CWA 17145-1:2017 Ethics assessment for research and innovation - Part 1: Ethics committee 6. EN ISO 41011:2018 Facility management - Vocabulary (ISO 41011:2017) 7. EN ISO 41001:2018 Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018) 8. IWA 18:2016 Framework for integrated community-based life-long health and care services in aged societies 9. IWA 16:2015 International harmonized method(s) for a coherent quantification of CO2e emissions of freight transport 10. ISO/IEC Guide 17:2016 ISO/IEC Guide 17:2016Guide for writing standards taking into account the needs of micro, small and medium-sized enterprises 11. ISO 37500:2014 Guidance on outsourcing Technical Committee No. 3 “Electrical and electronical materials”, 59 standards No. Standard number English title 1. EN 50288-12-1:2017 Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - 1 Horizontal and building backbone cables 2.
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 3
    Hrvatski zavod za norme Oglasnik za normativne dokumente 3/2016 lipanj, 2016. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije 1.1 Hrvatske norme.................................................................................................................... A3 1.2 Nacrti hrvatskih norma.......................................................................................................... 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku.............................................................. A32 1.4 Povučene hrvatske norme.................................................................................................... A70 1.5 Povučeni nacrti hrvatskih norma........................................................................................... 1.6 Ispravci hrvatskih norma....................................................................................................... A95 1.7 Naslovi objavljenih hrvatskih norma na hrvatskome jeziku..................................................
    [Show full text]
  • Standards Available in Electronic Format (PDF) Page 1
    Standards available in electronic format (PDF) August 2019 SANS Number Edition Title SANS 1-2:2013 2 Standard for standards Part 2: Recognition of Standards Development Organizations (SDOs) in South Africa SATS 2:2012 1 The development of normative documents other than South African National Standards SANS 2:2013 7.01 Lead-acid starter batteries (SABS 2) SANS 4:2008 3.03 Locks, latches, and associated furniture for doors (SABS 4) (Domestic Type) SANS 11:2007 1.02 Unplasticized poly(vinyl chloride) (PVC-U) (SABS 11) components for external rainwater systems SANS 13:2008 2.03 Wax polish, solvent-based, for floors and furniture (SABS 13) SANS 14:1994/ISO 49:1994, IDT, Ed. 2 1 Malleable cast iron fittings threaded to ISO 7-1 (SABS ISO 49) SANS 15:2008 2.03 Wax emulsion polish for floors and furniture (SABS 15) SANS 16:2007/ISO/IEC 10116:2006, IDT, Ed. 3 2 Information technology - Security techniques - Modes of operation for an n-bit block cipher SANS 17:2014 1.01 Glass and plastics in furniture SANS 18-1:2003/ISO/IEC 10118-1:2000, IDT, Ed. 2 1 Information technology - Security techniques - Hash- functions Part 1: General SANS 18-2:2011/ISO/IEC 10118-2:2010, IDT, Ed. 3 2 Information technology - Security techniques - Hash- functions Part 2: Hash-functions using an n-bit block cipher SANS 18-3:2007/ISO/IEC 10118-3:2004, IDT, Ed. 3 2 Information technology - Security techniques - Hash- functions Part 3: Dedicated hash-functions SANS 18-4:2003/ISO/IEC 10118-4:1998, IDT, Ed.
    [Show full text]
  • PRODUCTS SOLUTIONS 2018 2 SEW-EURODRIVE—Driving the World 3
    Drive Technology \ Drive Automation \ System Integration \ Services PRODUCTS SOLUTIONS 2018 2 SEW-EURODRIVE—Driving the world 3 Heading for the future together Creating high-quality products and innovative solutions to power your success has always been what drives our company. The hard work we put in has one key goal – to ensure complete customer satisfaction. It is therefore a great pleasure for me to introduce the latest edition of our products and solutions catalog, offering an insight into new, exciting areas of business including machine and factory automation. These technologies and visions will be increasingly important in the years ahead – they will shape our future. Of course, we are also continuing to work on improving and expanding our product portfolio. For instance, you can rest assured that you will be well prepared for new statutory energy efficiency requirements. After all, the new DRN.. AC motors in the 0.09 to 0.55 kW power range already meet the IE3 energy efficiency class. This catalog provides a full overview of the new MOVI-C® modular automation system as well, including the MOVISUITE® engineering software, the MOVIRUN® software platform for startup, and the new, prefabricated MOVIKIT® software modules to help you implement even the most complicated motion control functions. As always, this edition also covers our comprehensive range of services. We offer ser- vices designed for the entire life cycle of your system so that you can maximize reliability and benefit from the expertise of a skilled partner. And of course, our products and services can be tailored precisely to your needs and appli- cations.
    [Show full text]
  • Catalogue of International Standards Used in the Petroleum and Natural Gas Industries
    Catalogue of international standards used in the petroleum and natural gas industries Report No. 362 February 2012 update P ublications Global experience The International Association of Oil & Gas Producers has access to a wealth of technical knowledge and experience with its members operating around the world in many different terrains. We collate and distil this valuable knowledge for the industry to use as guidelines for good practice by individual members. Consistent high quality database and guidelines Our overall aim is to ensure a consistent approach to training, management and best prac- tice throughout the world. The oil & gas exploration & production industry recognises the need to develop consist- ent databases and records in certain fields. The OGP’s members are encouraged to use the guidelines as a starting point for their operations or to supplement their own policies and regulations which may apply locally. Internationally recognised source of industry information Many of our guidelines have been recognised and used by international authorities and safety and environmental bodies. Requests come from governments and non-government organisations around the world as well as from non-member companies. Disclaimer Whilst every effort has been made to ensure the accuracy of the information contained in this publica- tion, neither the OGP nor any of its members past present or future warrants its accuracy or will, regard- less of its or their negligence, assume liability for any foreseeable or unforeseeable use made thereof, which liability is hereby excluded. Consequently, such use is at the recipient’s own risk on the basis that any use by the recipient constitutes agreement to the terms of this disclaimer.
    [Show full text]
  • Standards for Enabling Trade— Mapping and Gap Analysis Study
    Standards for Enabling Trade— Mapping and Gap Analysis Study An IA-CEPA Early Outcomes Initiative November 2017 Standards For Enabling Trade—Mapping and Gap Analysis Study 2 An IA-CEPA Early Outcomes Initiative – November 2017 Contents ListofFigures..............................................................................................................3 Abbreviations...............................................................................................................4 Terms..........................................................................................................................6 Acknowledgements......................................................................................................8 ExplanatoryNotes........................................................................................................8 Foreword.....................................................................................................................9 Recommendations.....................................................................................................10 ExecutiveSummary....................................................................................................11 Introduction................................................................................................................13 ProjectPurpose.........................................................................................................13 Objectives..................................................................................................................13
    [Show full text]
  • Evaluation of Alternative Field Buses for Lighting Control Applications
    Lawrence Berkeley National Laboratory Lawrence Berkeley National Laboratory Title Evaluation of Alternative Field Buses for Lighting Control Applications Permalink https://escholarship.org/uc/item/69z068th Authors Koch, Ed Rubinstein, Francis Publication Date 2005-03-21 eScholarship.org Powered by the California Digital Library University of California Evaluation of Alternative Field Buses for Lighting Control Applications Prepared By: Ed Koch, Akua Controls Edited By: Francis Rubinstein, Lawrence Berkeley National Laboratory Prepared For: Broadata Communications Torrence, CA March 21, 2005 Table of Contents Introduction......................................................................................................................... 3 Purpose ................................................................................................................................. 3 Statement of Work ................................................................................................................ 3 1-Wire Net .......................................................................................................................... 4 Introduction and Background................................................................................................ 4 Technical Specifications......................................................................................................... 5 Description of Technology........................................................................................ 5 Practical Considerations .........................................................................................
    [Show full text]
  • Corrosion Protection of Steel Structures by Protective Paint Systems - Part 6: Laboratory Performance Test Methods (ISO 12944-6:2018)
    Irish Standard I.S. EN ISO 12944-6:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018) © CEN 2018 No copying without NSAI permission except as permitted by copyright law. This is a free 30 page sample. Access the full version online. I.S. EN ISO 12944-6:2018 Incorporating amendments/corrigenda/National Annexes issued since publication: The National Standards Authority of Ireland (NSAI) produces the following categories of formal documents: I.S. xxx: Irish Standard — national specification based on the consensus of an expert panel and subject to public consultation. S.R. xxx: Standard Recommendation — recommendation based on the consensus of an expert panel and subject to public consultation. SWiFT xxx: A rapidly developed recommendatory document based on the consensus of the participants of an NSAI workshop. This document replaces/revises/consolidates the NSAI adoption of the document(s) indicated on the CEN/CENELEC cover/Foreword and the following National document(s): NOTE: The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document. This document is based on: Published: EN ISO 12944-6:2018 2018-02-14 This document was published ICS number: under the authority of the NSAI and comes into effect on: 87.020 2018-03-04 NOTE: If blank see CEN/CENELEC cover page NSAI T +353 1 807 3800 Sales: This is a free 30 page sample. Access the full version online. 1 Swift Square, F +353 1 807 3838 T +353 1 857 6730 Northwood, Santry E [email protected] F +353 1 857 6729 Dublin 9 W NSAI.ie W standards.ie Údarás um Chaighdeáin Náisiúnta na hÉireann National Foreword I.S.
    [Show full text]
  • 35552Gon604.Pdf
    STAATSKOERANT, 3 AUGUSTUS 2012 No.35552 27 DEPARTMENT OF TRADE AND INDUSTRY No. 604 3 August 2012 STANDARDS ACT, 1008 STANDARDS MATTERS In terms of the Standards Act, 2008 (Act No. 8 of 2008), the Council of the South African Bureau of Standards has acted in regard to standards in the manner set out in the Schedules to this notice. All South African standards that were previously published by the South African Bureau of Standards with the prefix "SABS" have been redesignated as South African national standards and are now published by the SABS Standards Division (a division ofSABS) with the prefix "SANS". A list of all existing South African national standards was published by Government Notice No. 1373 of8 November 2002. In the list ofSANS standards below, the equivalent SABS numbers, where applicable, are given below the new SANS numbers for the sake of convenience. Standards that were published with the "SABS" prefix are listed as such. SCHEDULE 1: ISSUE OF NEW STANDARDS The standards mentioned have been issued in terms of section 16(3) of the Act. Standard No. Title, scope and purport and year Photovollilic systems for use in individual homes, schools and clinics -Port I: Standardized requirements applicable to off- grid individual homes, schools and clinics. Specifies requirements for the components of photo voltaic systems, based on a SANS 9S9-1 :2012/ d.c. supply of 12 V for individual homes and photovollaic systems as optimized for selected system sizes, based on an a.c. NRS OS2-1:2012 supply of230 V for selected schools and clinics, as envisaged in a national programme to provide solar power to individual homes, schools and clinics.
    [Show full text]