Faculty of Engineering and Physical Sciences
Chemical Plant Commissioning Wednesday 25 – Friday 27 November 2020
100% of 2019 respondents said they would recommend this course to colleagues Programme Chemical Plant Wednesday 25 November 2020 Friday 27 November 2020 09.00 Registration and Coffee 08.45 Coffee 09.30 Opening address 09.00 The law, safety and the environment Professor Mike Fairweather, University of Leeds Dr Martin Pitt, University of Sheffield Commissioning 09.45 Introduction to plant commissioning 09.45 Commissioning hazard studies Dr Martin Pitt, University of Sheffield Professor Paul Lunt, Thaioil and Visiting Wednesday 25 – Friday 27 November 2020 10.15 Pre-commissioning Professor, University of Leeds Dr Martin Pitt, University of Sheffield 10.30 Case study – commissioning small areas of plant 11.00 Coffee Richard Griffiths, BOC Ltd, a member of the Linde Group About the course Course fees 11.15 Tutorial exercise: heat transfer utility 11.15 Coffee This course will deal with the commissioning and The course fee includes a comprehensive Dr Martin Pitt, University of Sheffield 11.30 Case study – commissioning of large-scale plants start up of both large and small process plants. It course manual, lunches and refreshments, 13.00 Lunch Barry Monk, Trans Adriatic Pipeline will cover many different aspects including the together with the course dinner: 14.00 Tutorial exercise continued 12.15 Commissioning top tips planning and managerial aspects of major plants, IChemE Member £1310 14.30 Discussion on tutorial exercise Martin Killcross, Consultant the start up of small plants with an emphasis on Non IChemE Member £1390 Dr Martin Pitt, University of Sheffield 13.00 Course review the technical problems and also dealing with the Late registration supplement (after 21 October) 14.45 Developing effective commissioning Professor Mike Fairweather, University of Leeds £80 plans and schedules documentation associated with commissioning. 13.10 Buffet Lunch Martin Killcross, Commissioning Consultant To take advantage of the preferential terms, 13.55 End of day three and course Typically we find that those attending will be about to bookings must be made on or before Wednesday 15.30 Tea embark on their first significant commissioning role 21 October 2020. Substitutions may be made 15.45 Planning tutorial exercise and have come to learn from the wide experiences Martin Killcross, Commissioning Consultant What our previous delegates say: at any time without extra charge except that a and Dr Martin Pitt, University of Sheffield of the course presenters, all of whom have been Great insight into commissioning as a non IChemE substitute will be liable to the £80 17.15 End of day one associated with start ups themselves. There will newly graduated Process Engineer. Plenty supplement on the ordinary registration fee. 18.45 Course dinner for all delegates be substantial emphasis on tutorial exercises in of case studies and workshops to get some both commissioning and pre-commissioning. hands-on learning.” Course dinner Thursday 26 November 2020 The course dinner will be held at a Leeds city Johnson Matthey Plc Who should attend? 09.00 Coffee centre restaurant and is included in the course 09.15 Plant completion – dealing with complexity This course will be of interest to young graduate This is an excellent course providing great detail fee. This will take place on Wednesday evening Professor Paul Lunt, Thaioil and Visiting process engineers about to take on their first and transport from and to Weetwood Hall Estate Professor, University of Leeds on the challenges faced when commissioning, major commissioning responsibility, and process is provided. The dress code is smart casual. If you 10.00 Risk based commissioning and start-up including technical, commercial and structural.” engineers who want to strengthen their knowledge in would like to attend please indicate when booking. Professor Paul Lunt, Thaioil and Visiting William Blythe Ltd commissioning in order to commission a new plant. Professor, University of Leeds Course accreditation 10.45 Commissioning tutorial exercise This course is an absolute must for any Professor Paul Lunt, Thaioil and Visiting This course is an IChemE approved short Process Engineer on their first commissioning Course Director Professor, University of Leeds course and all delegates will receive an 11.30 Coffee assignment, regardless of the engineer, Professor Mike Fairweather IChemE certificate shortly after the course. 11.45 Tutorial exercise continued technical support or adviser.” School of Chemical and Process 13.00 Lunch Massy Energy Engineering, University of Leeds 13.45 Commissioning instruments Deputy Course Director Phillip Stoor, Consultant Engineer Very experienced speakers sharing their 14.45 Tutorial in diagnosing causes of mal-operation stories. Very worthwhile training for those Dr Martin Pitt Phillip Stoor, Consultant Engineer with limited experience in commissioning.” Chemical and Biological Engineering, 15.45 Tea GSK University of Sheffield 16.00 The role of the process control engineer Deputy Course Director (Industrial) David Stockill, Stockill Energy Please note, although we remain devoted to the programme Management Systems Ltd specified, we reserve the right to vary the programme in Professor Paul Lunt 17.00 End of day two detail if required to do so by factors beyond our control. Thaioil and Visiting Professor, University of Leeds The full course details and online booking are now available from the course web page: https://eps.leeds.ac.uk/short-courses Further information Venue How to book The venue for the course will be Weetwood Hall Estate Booking for this course should be completed which offers first-class hotel facilities, a business centre and through our secure Online Store. To complete ample parking facilities. your booking please follow the instructions below: Weetwood Hall Estate is ideally situated 15 minutes north of 1. Log on to our Online Store at the centre of Leeds in wooded grounds at the junction of the https://store.leeds.ac.uk Otley Road and the outer ring road. It is just 15 minutes from 2. Select Conferences and Events in the left-hand Leeds Bradford International Airport and a short distance navigation bar. from the A1, M1, M606, M621 and M62 motorways. 3. Select CPD Faculty of Engineering and Physical Sciences Further details can be found at www.weetwood.co.uk 4. Select the course or event for which you wish to register and click on ‘Book’ Accommodation 5. If you are a new user, please follow the instructions If you require accommodation, and wish to stay at the to register. If you already have an account log in as course venue Weetwood Hall Estate, please contact instructed. Emma Barker E: [email protected] 6. Complete the application process as directed by the T: 0113 230 6000 quoting ‘CPD’ and the booking system. ‘Chemical Plant Commissioning’ course. You will receive an automatic confirmation email within 24 The below rates are for a superior double room and include VAT: hours of your booking. Tuesday – Thursday evening, bed and breakfast £88 Our privacy notice tells you what to expect us to do with your personal information when you make contact with us Please book your accommodation at least two weeks before or use one of our services: https://eps.leeds.ac.uk/privacy the course commences to guarantee rates and availability. A list of alternative hotels is available on request. Delegates are Accessibility responsible for their own evening meals except on Wednesday Potential delegates who have any special requirements 25 November when the course dinner is included. should contact the course coordinator as soon as possible. Course dinner For online booking queries and for all other enquiries The course dinner will be held at a Leeds city centre please contact: restaurant and is included in the course fee. This will take Harriet Wills place on Wednesday evening and transport to and from CPD Conference & Events Co-ordinator Weetwood Hall is provided. The dress code is smart casual. CPD, Conference & Events Unit If you would like to attend please indicate when booking. Faculty of Engineering and Physical Sciences School of Chemical and Process Engineering Room 3.11 University of Leeds Leeds LS2 9JT, UK T: +44 (0)113 343 2494 E: [email protected] W: https://eps.leeds.ac.uk/short-courses @LeedsUniCPD @LeedsUniCPD CPD, Conference and Events Unit, University of Leeds
Terms and conditions for booking Payment by debit/credit card For cancellations made after seven days of booking: written Payment should be made at the time of booking via the Online Store. cancellations received up to 15 working days before the course Payment via purchase order and invoice will be subject to an administrative charge of 20% of the total fee. A purchase order document should accompany your booking form. Within 15 working days of the course the full fee is payable and no Our standard terms of payment are 30 days from date of invoice, refunds will be made. however payment must be made prior to attendance. Attendance For non-attendance: the full fee is payable and no refunds will may be refused if payment has not been received. be made but copies of the course materials will be sent to the registered delegate. Substitutions may be made at any time. Changes made by the University of Leeds The course programme may have to be re-scheduled or the Data/Privacy speakers changed for reasons outside our control. The University Your right to privacy is important to us. We will only use of Leeds reserves the right to cancel or postpone a course, your information to provide information on our CPD courses in which case fees will be refunded in full. In the event of and relevant events. We will not pass your details on to any other cancellation, the University will not be held liable for delegates’ organisations. The ways in which your personal data may be used travel or accommodation expenses. when you provide it to us are defined in our Privacy Notice at https://eps.leeds.ac.uk/privacy. Where a delegate cancels a registration For cancellations made within seven days of booking: a full refund If you have opted in to receive details of future CPD courses is payable unless the course starts within the next seven days, in from us you can unsubscribe at any time by emailing us at which case the full fee is payable and no refunds will be made. [email protected] and your details will be removed from our database.