SUBSIDIARIES AND AFFILIATES (As of July 1, 2017)

Toshiba America Toshiba Electronics Europe GmbH Toshiba Electronics Asia, Ltd. Nov. 2017 Semiconductor Catalog Nov. 2017 Electronic Components, Inc. • Düsseldorf Head Office Tel: 2375-6111 Fax: 2375-0969 • Irvine, Headquarters Tel: (0211)5296-0 Fax: (0211)5296-400 Toshiba Electronics (China) Co., Ltd. BCE0085H Tel: (949)462-7700 Fax: (949)462-2200 • France Branch • Shanghai Head Office • Buffalo Grove (Chicago) Tel: (1)47282181 Tel: (021)6139-3888 Fax: (021)6190-8288 Tel: (847)484-2400 Fax: (847)541-7287 • Italy Branch • Beijing Branch • Duluth/Atlanta Tel: (039)68701 Fax:(039)6870205 Tel: (010)6590-8796 Fax: (010)6590-8791 Tel: (404)639-9520 Fax: (404)634-4434 • Munich Office • Chengdu Branch • El Paso Tel: (089)20302030 Fax: (089)203020310 Tel: (028)8675-1773 Fax: (028)8675-1065 Tel: (915)533-4242 • Spain Branch • Hangzhou Office • Marlborough Tel: (91)660-6794 Tel: (0571)8717-5004 Fax: (0571)8717-5013 Tel: (508)481-0034 Fax: (508)481-8828 • Sweden Branch • Nanjing Office • Parsippany Tel: (08)704-0900 Fax: (08)80-8459 Tel: (025)8689-0070 Fax: (025)5266-5106 Tel: (973)541-4715 Fax: (973)541-4716 • U.K. Branch • Qingdao Branch 32-Bit Microcontrollers • San Jose Tel: (1932)841600 Tel: (532)8579-3328 Fax: (532)8579-3329 Tel: (408)526-2400 Fax: (408)526-2410 Toshiba Electronics Asia (Singapore) Pte. Ltd. • Shenzhen Branch • Wixom (Detroit) Tel: (65)6278-5252 Fax: (65)6271-5155 Tel: (0755)3686-0880 Fax: (0755)3686-0816 Tel: (248)347-2607 Fax: (248)347-2602 Toshiba Electronics Service (Thailand) Co., Ltd. • Dalian Branch Toshiba América do Sul Ltda. Tel: (02)835-3491 Fax: (02)835-3490 Tel: (0411)8368-6882 Fax: (0411)8369-0822 Tel: (011)4083-7978 Toshiba Electronics Trading (Malaysia) Sdn. Bhd. • Xiamen Branch Toshiba India Private Ltd. • Kuala Lumpur Head Office Tel: (0592)226-1398 Fax: (0592)226-1399 • New Delhi Office Tel: (03)5631-6311 Fax: (03)5631-6307 • GuangZhou Office 32-Bit Microcontrollers Tel: (0124)499-6600 Fax: (0124)499-6611 • Penang Office Tel: (020)8732-2646 Fax: (020) 8732-2651 • Bangalore Office Tel: (04)226-8523 Fax: (04)226-8515 • Shenyang Office Tel: (080)251-90800 Toshiba Electronics Korea Corporation Tel: (024)3187-3325 Fax: (024)3187-3326 Toshiba Transmission and Tel: (02)3484-4334 Fax: (02)3484-4302 • Xi'an Office Distribution Systems (Vietnam) Ltd. Toshiba Electronic Components Taiwan Corporation Tel: (029)8720-3176 Fax: (029)8720-3565 Tel: (043)776-5950 Fax: (043)776-5956 Tel: (02)2508-9988 Fax: (02)2508-9999 • Wuhan Office Tel: (027)8555-7779 Fax: (027)8555-7842

RESTRICTIONS ON PRODUCT USE

Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”. Hardware, software and systems described in this document are collectively referred to as “Product”. TOSHIBA reserves the right to make changes to the information in this document and related Product without notice. This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative. Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations.

The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

Product may include products subject to foreign exchange and foreign trade control laws.

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.

2017 Website: https://toshiba.semicon-storage.com/ Previous edition: BCE0085G SEMICONDUCTOR & STORAGE PRODUCTS https:// toshiba.semicon-storage.com/ Product Lineups of the TX and TXZ Families

The TX and TXZ families consist of microcontrollers with an Arm Cortex®-M core. These families feature high energy efficiency and are suitable for real-time control applications. ® Arm Core-Based 32-Bit Microcontrollers The TXZ family, a new variant of the TX family, provides an enhanced suite of IP cores and flash memories. The TXZ family also features high-precision analog circuitry, higher speed and lower power consumption. The TX and TXZ families of Arm core microcontrollers realize the desires of customers and seek to provide solutions in The TX and TXZ families consist of several series named after the integrated Arm core, which are further subdivided into many various fields through our proprietary high-precision analog circuitry with low-power-consumption digital logic. groups according to their target applications. By thinking together with customers, Toshiba seeks to continually create a more convenient and comfortable society through microcontrollers.

TX00 Series M030 M060 TXZ0 Series Cortex-M0 Group Group

TX03 Series M310 M330 M350 M370 M390 TXZ3 Series Group Group Group Group Group M3H M3H Group (1) Group (2) M320 M340 M360 M380 Cortex-M3 Group Group Group Group

TX04 Series TXZ4 Series Cortex-M4 M440 M460 M470 M4K (with FPU) Group Group Group Group

Features of the TXZ Family

Outstanding basic performance

● Wide range of operating voltage: Arm Cortex-M4 1.62 to 5.5 V Arm Cortex-M0 Arm Cortex-M3 ● Operating frequency of up to 200 MHz processor with FPU ● Operating current of 100 µA/MHz Reliable safety functions and STOP3 (RTC operation) of 0.5 µA ● Complaint with the European ● High-precision on-chip oscillator: safety standard for home 10 MHz±1% *2 appliances (IEC 60730) ● Self-diagnostic function ● Enhanced noise resistance Contents Microcontrollers with Peripheral Functions Suitable TZ1000 and TZ1200 ApP Lite Application Processor Series Enhanced peripheral for Motor Control Applications ...... 4 for IoT and Wearable Device Applications ...... 18 functions General-Purpose Microcontrollers Mainly TZ2100 ApP Lite Application Processor Series ● Advanced Vector Engine Plus (A-VE+), for Home Appliance Applications ...... 8 for Industrial Applications ...... 19 op-amp and comparator for motor control Microcontrollers Suitable for Digital Equipment Applications ...... 10 Support for Arm Ecosystem ...... 20 ● Large-capacity data flash memory: Microcontrollers with USB 2.0 (Full-Speed) Interfaces Ecosystem partners for development environments ...... 21 100,000 write-erase cycles *1 for Sensor Control Applications ...... 11 Application Notes and Sample Programs ...... 22 ● High-speed AD converter High-Performance Microcontrollers with Various Serial Interfaces Evaluation Kits and Reference Boards ...... 23 and a High-Capacity Flash Memory ...... 12 Microcomputer web page ...... 26 Microcontrollers Supporting Diverse Applications Ranging Wide range of from Digital Applications to Factory Automation and Office Equipment ...... 13 Part Numbering Nomenclature ...... 27 product lineup Powerful development Microcontrollers in a Small Package Incorporating High-Precision Note ● Packaging: 32 to 176 pins Analog Control Interfaces ...... 14 ● environment System block diagrams in this brochure only show the typical application ● Code memory: 32 KB to 2 MB Microcontrollers with a High-Precision, examples. ● Various development tools provided ● ● Data memory: 8 KB to 64 KB 24-Bit Sigma-Delta AD Converter ...... 15 Company, product and service names mentioned herein may be trademarks or in partnership with Arm® registered trademarks of respective companies. ● RAM: 8 KB to 256 KB Microcontrollers with Low Power Consumption ● ● Wide range of CMSIS-compliantdriver Supporting 1.8-V Operation ...... 16 Arm, Cortex, Thumb, Keil and ARM926EJ-S are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere. software Microcontrollers for Automotive Audio Control ● ULINK ME is a trademark of Arm Limited (or its subsidiary) in the US and ● Efficient dynamic verification using and Processing Applications ...... 17 countries elsewhere. RAMScope

Automotive Microcontrollers Compliant ● Bluetooth is a registered trademark of Bluetooth SIG, Inc.

with the ISO 26262 Functional Safety Standard ...... 17 ● TransferJet regular typeface and TransferJet logos are trademarks licensed by (*1) Write-erase cycle is changed depend on usage environment. TransferJet Consortium Incorporated Association. (*2) At the time of factory shipment

2 Product Lineups of the TX and TXZ Families

The TX and TXZ families consist of microcontrollers with an Arm Cortex®-M core. These families feature high energy efficiency and are suitable for real-time control applications. ® Arm Core-Based 32-Bit Microcontrollers The TXZ family, a new variant of the TX family, provides an enhanced suite of IP cores and flash memories. The TXZ family also features high-precision analog circuitry, higher speed and lower power consumption. The TX and TXZ families of Arm core microcontrollers realize the desires of customers and seek to provide solutions in The TX and TXZ families consist of several series named after the integrated Arm core, which are further subdivided into many various fields through our proprietary high-precision analog circuitry with low-power-consumption digital logic. groups according to their target applications. By thinking together with customers, Toshiba seeks to continually create a more convenient and comfortable society through microcontrollers.

TX00 Series M030 M060 TXZ0 Series Cortex-M0 Group Group

TX03 Series M310 M330 M350 M370 M390 TXZ3 Series Group Group Group Group Group M3H M3H Group (1) Group (2) M320 M340 M360 M380 Cortex-M3 Group Group Group Group

TX04 Series TXZ4 Series Cortex-M4 M440 M460 M470 M4K (with FPU) Group Group Group Group

Features of the TXZ Family

Outstanding basic performance

● Wide range of operating voltage: Arm Cortex-M4 1.62 to 5.5 V Arm Cortex-M0 Arm Cortex-M3 ● Operating frequency of up to 200 MHz processor with FPU ● Operating current of 100 µA/MHz Reliable safety functions and STOP3 (RTC operation) of 0.5 µA ● Complaint with the European ● High-precision on-chip oscillator: safety standard for home 10 MHz±1% *2 appliances (IEC 60730) ● Self-diagnostic function ● Enhanced noise resistance Contents Microcontrollers with Peripheral Functions Suitable TZ1000 and TZ1200 ApP Lite Application Processor Series Enhanced peripheral for Motor Control Applications ...... 4 for IoT and Wearable Device Applications ...... 18 functions General-Purpose Microcontrollers Mainly TZ2100 ApP Lite Application Processor Series ● Advanced Vector Engine Plus (A-VE+), for Home Appliance Applications ...... 8 for Industrial Applications ...... 19 op-amp and comparator for motor control Microcontrollers Suitable for Digital Equipment Applications ...... 10 Support for Arm Ecosystem ...... 20 ● Large-capacity data flash memory: Microcontrollers with USB 2.0 (Full-Speed) Interfaces Ecosystem partners for development environments ...... 21 100,000 write-erase cycles *1 for Sensor Control Applications ...... 11 Application Notes and Sample Programs ...... 22 ● High-speed AD converter High-Performance Microcontrollers with Various Serial Interfaces Evaluation Kits and Reference Boards ...... 23 and a High-Capacity Flash Memory ...... 12 Microcomputer web page ...... 26 Microcontrollers Supporting Diverse Applications Ranging Wide range of from Digital Applications to Factory Automation and Office Equipment ...... 13 Part Numbering Nomenclature ...... 27 product lineup Powerful development Microcontrollers in a Small Package Incorporating High-Precision Note ● Packaging: 32 to 176 pins Analog Control Interfaces ...... 14 ● environment System block diagrams in this brochure only show the typical application ● Code memory: 32 KB to 2 MB Microcontrollers with a High-Precision, examples. ● Various development tools provided ● ● Data memory: 8 KB to 64 KB 24-Bit Sigma-Delta AD Converter ...... 15 Company, product and service names mentioned herein may be trademarks or in partnership with Arm® registered trademarks of respective companies. ● RAM: 8 KB to 256 KB Microcontrollers with Low Power Consumption ● ● Wide range of CMSIS-compliantdriver Supporting 1.8-V Operation ...... 16 Arm, Cortex, Thumb, Keil and ARM926EJ-S are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere. software Microcontrollers for Automotive Audio Control ● ULINK ME is a trademark of Arm Limited (or its subsidiary) in the US and ● Efficient dynamic verification using and Processing Applications ...... 17 countries elsewhere. RAMScope

Automotive Microcontrollers Compliant ● Bluetooth is a registered trademark of Bluetooth SIG, Inc. with the ISO 26262 Functional Safety Standard ...... 17 ● TransferJet regular typeface and TransferJet logos are trademarks licensed by (*1) Write-erase cycle is changed depend on usage environment. TransferJet Consortium Incorporated Association. (*2) At the time of factory shipment

3 Microcontrollers with Peripheral Functions Suitable for Motor Control Applications

Features Applications Motor Control Functions ● High-speed Arm Cortex®-M3 or Cortex®-M4 (with FPU) ● Home appliances ● ● Peripheral functions suitable for motor control ● Inverter motor control Four circuits work in tandem to provide Sensor data AD converter, programmable motor driver, vector engine, and encoder ● Industrial equipment sophisticated motor control: Motor ● Dynamic RAM analysis AD converter (ADC) Voltage Supports RAMScope Programmable motor driver (PMD) Note: Available only with the TMPM4K4 Vector engine (VE) Current ● 5-V operation suitable for motor control Encoder (ENC) Inverter

● Product Lineup 3-Phase Waveform ROM Size Current Detection (Flash) TX03 Series/M370 Group TXZ4 Series/M4K Group TX04 Series/M470 Group **: Under development Generation

TMPM470FDFG It allows to generate motor control This is a successive-approximation TMPM475FDFG 512 KB waveforms in cooperation with threephase AD converter. TMPM376FDDFG PWM output and ADC. TMPM376FDFG TMPM470FZFG PMD ADC 384 KB TMPM475FZFG TMPM4K1FYAUG** TMPM4K2FYADUG** TMPM4K4FYAUG** TMPM470FYFG TMPM4K4FYAFG** TMPM475FYFG 256 KB Vector Calculation Motor Position Sensing TMPM370FYDFG VE ENC TMPM370FYFG The VE is a hardware unit that handles The signals from an incremental TMPM4K1FWAUG** TMPM4K2FWADUG** TMPM4K4FWAUG** calculations for vector control. encoder or Hall sensor can be 128 KB TMPM374FWUG TMPM373FWDUG TMPM4K4FWAFG** It can operate in cooperation with ADC and PMD input directly. TMPM372FWUG without software intervention. TMPM4K1FUAUG** TMPM4K2FUADUG** TMPM4K4FUAUG** 96 KB (* The current values and phases setting are TMPM4K4FUAFG** programmed via software.) TMPM375FSDMG TMPM4K0FSADUG** TMPM4K1FSAUG** TMPM4K2FSADUG** TMPM4K4FSAUG** 64 KB TMPM37AFSQG TMPM4K4FSAFG** The arrows denote communication paths between IP cores. 30 pins 32 pins 44 pins 48 pins 64 pins 100 pins Pin Count

● Evaluation Kit Debugging

IAR Systems Starter Kit for IAR Systems Starter Kit for The M4K series provides an interface for a tool such as RAMScope that allows real-time debugging during motor operation. TMPM370 TMPM375 This makes it possible to perform a dynamic analysis necessary to debug motor control programs.

● Included hardware: ● Included hardware: TMPM370 evaluation board TMPM375 evaluation board IAR i-Jet Lite IAR i-Jet Lite Six control output pins are used. USB cable USB cable *The MK4K incorporates a dedicated IP core. IAR Embedded Workbench for Brushless DC motors ARM KickStart edition IAR Embedded Workbench for NBDSYNC PK4 ARM KickStart edition NBDDATA0 PL0 NBDDATA1 PL1 NBDDATA2 PL2 M4K4 NBDDATA3 ESP Starter Kit for ESP Starter Kit for PL3 NBDCLK TMPM37A TMPM475 PL4

● Included hardware: ● Included hardware: RAM Data TMPM37A evaluation board TMPM475 evaluation board Brushless DC motors Brushless DC motors M4K0 M4K1 M4K2 M4K4 Part Number (32 pin) (44 pin) (48 pin) (64 pin)

Supported ––– Supported Graph USB RAM Region Major Characteristics variables in the graph ● Makes it easy to debug and tune the MCU control software while a motor is running ● Puts no load on the control program for measurement *External signals that come from outside No memory-resident software is necessary for monitoring. the MCU can be imported into RAMScope and displayed on the same graph. ● Measurement interval: 8 µs Note: This table includes microcontrollers being planned and developed and is therefore subject to change without notice. Note: RAMScope is a product from DTS INSIGHT Corporation.

4 Microcontrollers with Peripheral Functions Suitable for Motor Control Applications

Features Applications Motor Control Functions ● High-speed Arm Cortex®-M3 or Cortex®-M4 (with FPU) ● Home appliances ● ● Peripheral functions suitable for motor control ● Inverter motor control Four circuits work in tandem to provide Sensor data AD converter, programmable motor driver, vector engine, and encoder ● Industrial equipment sophisticated motor control: Motor ● Dynamic RAM analysis AD converter (ADC) Voltage Supports RAMScope Programmable motor driver (PMD) Note: Available only with the TMPM4K4 Vector engine (VE) Current ● 5-V operation suitable for motor control Encoder (ENC) Inverter

● Product Lineup 3-Phase Waveform ROM Size Current Detection (Flash) TX03 Series/M370 Group TXZ4 Series/M4K Group TX04 Series/M470 Group **: Under development Generation

TMPM470FDFG It allows to generate motor control This is a successive-approximation TMPM475FDFG 512 KB waveforms in cooperation with threephase AD converter. TMPM376FDDFG PWM output and ADC. TMPM376FDFG TMPM470FZFG PMD ADC 384 KB TMPM475FZFG TMPM4K1FYAUG** TMPM4K2FYADUG** TMPM4K4FYAUG** TMPM470FYFG TMPM4K4FYAFG** TMPM475FYFG 256 KB Vector Calculation Motor Position Sensing TMPM370FYDFG VE ENC TMPM370FYFG The VE is a hardware unit that handles The signals from an incremental TMPM4K1FWAUG** TMPM4K2FWADUG** TMPM4K4FWAUG** calculations for vector control. encoder or Hall sensor can be 128 KB TMPM374FWUG TMPM373FWDUG TMPM4K4FWAFG** It can operate in cooperation with ADC and PMD input directly. TMPM372FWUG without software intervention. TMPM4K1FUAUG** TMPM4K2FUADUG** TMPM4K4FUAUG** 96 KB (* The current values and phases setting are TMPM4K4FUAFG** programmed via software.) TMPM375FSDMG TMPM4K0FSADUG** TMPM4K1FSAUG** TMPM4K2FSADUG** TMPM4K4FSAUG** 64 KB TMPM37AFSQG TMPM4K4FSAFG** The arrows denote communication paths between IP cores. 30 pins 32 pins 44 pins 48 pins 64 pins 100 pins Pin Count

● Evaluation Kit Debugging

IAR Systems Starter Kit for IAR Systems Starter Kit for The M4K series provides an interface for a tool such as RAMScope that allows real-time debugging during motor operation. TMPM370 TMPM375 This makes it possible to perform a dynamic analysis necessary to debug motor control programs.

● Included hardware: ● Included hardware: TMPM370 evaluation board TMPM375 evaluation board IAR i-Jet Lite IAR i-Jet Lite Six control output pins are used. USB cable USB cable *The MK4K incorporates a dedicated IP core. IAR Embedded Workbench for Brushless DC motors ARM KickStart edition IAR Embedded Workbench for NBDSYNC PK4 ARM KickStart edition NBDDATA0 PL0 NBDDATA1 PL1 NBDDATA2 PL2 M4K4 NBDDATA3 ESP Starter Kit for ESP Starter Kit for PL3 NBDCLK TMPM37A TMPM475 PL4

● Included hardware: ● Included hardware: RAM Data TMPM37A evaluation board TMPM475 evaluation board Brushless DC motors Brushless DC motors M4K0 M4K1 M4K2 M4K4 Part Number (32 pin) (44 pin) (48 pin) (64 pin)

Supported ––– Supported Graph USB RAM Region Major Characteristics variables in the graph ● Makes it easy to debug and tune the MCU control software while a motor is running ● Puts no load on the control program for measurement *External signals that come from outside No memory-resident software is necessary for monitoring. the MCU can be imported into RAMScope and displayed on the same graph. ● Measurement interval: 8 µs Note: This table includes microcontrollers being planned and developed and is therefore subject to change without notice. Note: RAMScope is a product from DTS INSIGHT Corporation.

5 Microcontrollers with Peripheral Functions Suitable for Motor Control Applications

● System Block Diagram (Air Conditioners) Features of the Vector Engine (VE)

Operating Mode Display High-efficiency motor control, reducing the CPU workload Power Level Display Fan Motor LEDs LED Driver The vector engine is a dedicated hardware unit designed to perform Indoor Unit Outdoor Unit Inverter various operations for motor vector CPU: Arm Cortex-M3 Vector Engine (VE) Programmable Motor Driver Temperature (PMD) Motor Sensors (room PFC Circuit Outdoor fan motor2 control. Since the vector engine has the Power Supply Current Control temperature, IGBTs IPDs capability for performing basic vector Output PWM Gen. M radiant heat, dq→UVW Conversion PFC Single-Chip Inverter IC Speed Control heat exchanger) control operations (such as coordinate Sampling Trigger Gen. Sampling Timing Calculation transformations, phase transformations Outdoor fan Output Interfacing Operation Communication motor1 and sine/cosine calculations), a PI Commands Main Control I/O Motor Control Motor algorithm for current control, and PMD Position 12-Bit ADC Operation Data MCU Controller MCU Photo couplers and high-speed ADC interface Estimation Input Interfacing Remote Controller Sampling Control EEPROM M370 Group operations, it helps to reduce the UVW→dq Conversion M3H Group (Data control) M470 Group Current Detection Unit Remote Control M4K Group software workload significantly. MCU Two-Way Valve/ Four-Way Valve Software Hardware Photocouplers Filter Indoor fan Louver Auto IGBT/MOSFET Cleaner 1, 2 motor Motor Louver Driver Triacs Motor Sensor Photocouplers Motor Controller Motor (Open/close Highly flexible hardware Drivers Driver IPD Detection) Compressor driver Since the requirements for speed control and position estimation differ greatly among individual applications and users, they can be implemented via software. The vector engine provides great flexibility in allowing you to create various schedules that define a Two-Way combined sequence of VE and user’s software operations to perform. The vector engine supports two operating modes: Filter Filter DC Louver Open/close Com- Valve / Cleaner Cleaner Indoor Fan Scheduled mode that executes a series of operations consecutively and Single Task mode that executes individual tasks one by Motor detection pressor Four-Way one. Schedules can select a task that causes the vector engine to start execution. Fan Motor Actuator Motor Valve

Schedule #1 Coordinate Phase Phase Coordinate ● System Block Diagram (Washing Machine) Current SIN/COS Trigger Transform Transform Output Input Transform Transform Control (PI) Calculations Control dq→αβ 2→3 3→2 αβ→dq Data Set Trigger Inverter Control Circuit

PMD ADC Interrupt DC Motor AC Surge Schedule #4 100 V Absorber Coordinate Phase Phase Coordinate SIN/COS Trigger Position Transform Transform Output Input Transform Transform Calculations Control Sensing dq→αβ 2→3 3→2 αβ→dq Data Set Trigger Power PMD ADC Interrupt Phototriac Switch IGBT/MOSFET Driver Protection Schedule #9 coupler Circuit Photocoupler Trigger Output Input Control Power Switch Data Set Trigger Dryer Dryer Heater 1 Heater 2 PMD ADC Interrupt Dryer fan Single Task & Schedule #1 Motor Driver / Air Blower Fan Single Task Execution Schedule #1 Motor controller Motor Control IPD (DC Motor) MCU Coordinate Phase Phase Coordinate Circulating Pump Trigger Drain Valve Motor, Water Supply Valve, Transform Transform Output Input Transform Transform M370 Group Control Softener Supply Valve, Bath Water Pump Motor Driver / Circulating dq→αβ 2→3 3→2 αβ→dq M470 Group Motor controller Pump Phototriac M4K Group Phototriac Phototriac Phototriac Photo IPD Schedule #1 Data coupler coupler coupler coupler coupler Start Interrupt Start Interrupt Trigger Start Set Interrupt Indicator Task Selection Task Selection PWM Freq. Adjustment PMD ADC LED Softener Supply ValveSoftener Water Supply ValveWater Drain ValveMotor

Water-Level Sensors Cover Switches Volume Sensors Operation Panel Control MCU Diode Bath Water Pump

EEPROM (Data Control)

6 Microcontrollers with Peripheral Functions Suitable for Motor Control Applications

● System Block Diagram (Air Conditioners) Features of the Vector Engine (VE)

Operating Mode Display High-efficiency motor control, reducing the CPU workload Power Level Display Fan Motor LEDs LED Driver The vector engine is a dedicated hardware unit designed to perform Indoor Unit Outdoor Unit Inverter various operations for motor vector CPU: Arm Cortex-M3 Vector Engine (VE) Programmable Motor Driver Temperature (PMD) Motor Sensors (room PFC Circuit Outdoor fan motor2 control. Since the vector engine has the Power Supply Current Control temperature, IGBTs IPDs capability for performing basic vector Output PWM Gen. M radiant heat, dq→UVW Conversion PFC Single-Chip Inverter IC Speed Control heat exchanger) control operations (such as coordinate Sampling Trigger Gen. Sampling Timing Calculation transformations, phase transformations Outdoor fan Output Interfacing Operation Communication motor1 and sine/cosine calculations), a PI Commands Main Control I/O Motor Control Motor algorithm for current control, and PMD Position 12-Bit ADC Operation Data MCU Controller MCU Photo couplers and high-speed ADC interface Estimation Input Interfacing Remote Controller Sampling Control EEPROM M370 Group operations, it helps to reduce the UVW→dq Conversion M3H Group (Data control) M470 Group Current Detection Unit Remote Control M4K Group software workload significantly. MCU Two-Way Valve/ Four-Way Valve Software Hardware Photocouplers Filter Indoor fan Louver Auto IGBT/MOSFET Cleaner 1, 2 motor Motor Louver Driver Triacs Motor Sensor Photocouplers Motor Controller Motor (Open/close Highly flexible hardware Drivers Driver IPD Detection) Compressor driver Since the requirements for speed control and position estimation differ greatly among individual applications and users, they can be implemented via software. The vector engine provides great flexibility in allowing you to create various schedules that define a Two-Way combined sequence of VE and user’s software operations to perform. The vector engine supports two operating modes: Filter Filter DC Louver Open/close Com- Valve / Cleaner Cleaner Indoor Fan Scheduled mode that executes a series of operations consecutively and Single Task mode that executes individual tasks one by Motor detection pressor Four-Way one. Schedules can select a task that causes the vector engine to start execution. Fan Motor Actuator Motor Valve

Schedule #1 Coordinate Phase Phase Coordinate ● System Block Diagram (Washing Machine) Current SIN/COS Trigger Transform Transform Output Input Transform Transform Control (PI) Calculations Control dq→αβ 2→3 3→2 αβ→dq Data Set Trigger Inverter Control Circuit

PMD ADC Interrupt DC Motor AC Surge Schedule #4 100 V Absorber Coordinate Phase Phase Coordinate SIN/COS Trigger Position Transform Transform Output Input Transform Transform Calculations Control Sensing dq→αβ 2→3 3→2 αβ→dq Data Set Trigger Power PMD ADC Interrupt Phototriac Switch IGBT/MOSFET Driver Protection Schedule #9 coupler Circuit Photocoupler Trigger Output Input Control Power Switch Data Set Trigger Dryer Dryer Heater 1 Heater 2 PMD ADC Interrupt Dryer fan Single Task & Schedule #1 Motor Driver / Air Blower Fan Single Task Execution Schedule #1 Motor controller Motor Control IPD (DC Motor) MCU Coordinate Phase Phase Coordinate Circulating Pump Trigger Drain Valve Motor, Water Supply Valve, Transform Transform Output Input Transform Transform M370 Group Control Softener Supply Valve, Bath Water Pump Motor Driver / Circulating dq→αβ 2→3 3→2 αβ→dq M470 Group Motor controller Pump Phototriac M4K Group Phototriac Phototriac Phototriac Photo IPD Schedule #1 Data coupler coupler coupler coupler coupler Start Interrupt Start Interrupt Trigger Start Set Interrupt Indicator Task Selection Task Selection PWM Freq. Adjustment PMD ADC LED Softener Supply ValveSoftener Water Supply ValveWater Drain ValveMotor

Water-Level Sensors Cover Switches Volume Sensors Operation Panel Control MCU Diode Bath Water Pump

EEPROM (Data Control)

7 General-Purpose Microcontrollers Mainly for Home Appliance Applications

Features Applications Key points ● Extensive memory and package options ● Home appliances Extensive lineup of standard microcontrollers featuring low power consumption and high functionality. ● 2 General-purpose microcontrollers suitable for a variety of ● Heat pumps The microcontrollers shown below incorporate AD converters, DA converters, UART, timers, I C, SPI/SIO and motor controllers, making applications ● them suitable for a wide range of commercial and industrial applications. ● 5-V single power supply Compressors, ● Integrated data flash memory air blowers ● Product Lineup

● System Block Diagram (Induction Cooktops) ROM Size TXZ3 Series/M3H Group (1) TXZ3 Series/M3H Group (2) TX03 Series/M380 Group (Flash) **: Under development

TMPM3HMFDFG** TMPM3HNFDFG** TMPM3HPFDFG** TMPM3HQFDFG** Inverter Heater 512 KB TMPM3HNFDDFG** TMPM384FDFG TMPM380FDFG

TMPM3HMFZFG** TMPM3HNFZFG** TMPM3HPFZFG** TMPM3HQFZFG** 384 KB TMPM3HNFZDFG**

IGBT/MOSFET Driver TMPM3HMFYFG** TMPM3HNFYFG** TMPM3HPFYFG** TMPM3HQFYFG** TMPM3HNFYDFG** 256 KB TMPM380FYFG Photocoupler Photocoupler TMPM380FYDFG Operation Panel Control TMPM3H1FWUG** TMPM3H2FWDUG** TMPM3H3FWUG** TMPM3H4FWUG** TMPM3H5FWFG** TMPM3H6FWFG** Main Control ● LCDs TMPM3H2FWQG** TMPM3H4FWFG** TMPM3H5FWDFG** TMPM3H6FWDFG** M3H Group ● LEDs ● Key entry TMPM383FWUG TMPM380FWFG ● Timer 128 KB TMPM383FWEFG TMPM380FWDFG Radiant TMPM381FWFG Cooling Fan Heater TMPM381FWDFG

TMPM3H1FUUG** TMPM3H2FUDUG** TMPM3H3FUUG** TMPM3H4FUUG** TMPM3H5FUFG** TMPM3H6FUFG** Roaster Photocoupler 96 KB Heater TMPM3H2FUQG** TMPM3H4FUFG** TMPM3H5FUDFG** TMPM3H6FUDFG** TMPM3H0FSUG** TMPM3H1FSUG** TMPM3H2FSDUG** TMPM3H3FSUG** TMPM3H4FSUG** TMPM3H5FSFG** TMPM3H6FSFG**

TMPM3H2FSQG** TMPM3H4FSFG** TMPM3H5FSDFG** TMPM3H6FSDFG** 64 KB TMPM383FSUG ● System Block Diagram (Refrigerators) TMPM383FSEFG 48 KB TMPM3H1FPUG**

TMPM3H0FMUG** Power Supply Section 32 KB Key Input 32 pins 44 pins 48 pins 52 pins 64 pins 80 pins 100 pins 128 pins 144 pins Buzzer Output Compressor Control M Pin Count LED Outputs

Indoor Lighting: ● Evaluation Kit Driver Driver LEDs Mouser Electronics Online Shop Mouser Electronics Online Shop Three-Way Starter Kit for TMPM3HQ Starter Kit for TMPM3H6 Valve for Driver 2-Evaporator Switching ● Included hardware: ● Included hardware: TMPM3HQ evaluation board TMPM3H6 evaluation board Automatic USB cable USB cable Ice Maker Driver

Door SW Input Main Control Sensor Input M3H Group Display Section EEPROM Operation/Panel Control

C/R/F Interior Fan M Motor Driver LCD Backlight: LEDs Key Input Motor Damper M Buzzer Output Motor Driver LED Outputs

Reset IC

8 General-Purpose Microcontrollers Mainly for Home Appliance Applications

Features Applications Key points ● Extensive memory and package options ● Home appliances Extensive lineup of standard microcontrollers featuring low power consumption and high functionality. ● 2 General-purpose microcontrollers suitable for a variety of ● Heat pumps The microcontrollers shown below incorporate AD converters, DA converters, UART, timers, I C, SPI/SIO and motor controllers, making applications ● them suitable for a wide range of commercial and industrial applications. ● 5-V single power supply Compressors, ● Integrated data flash memory air blowers ● Product Lineup

● System Block Diagram (Induction Cooktops) ROM Size TXZ3 Series/M3H Group (1) TXZ3 Series/M3H Group (2) TX03 Series/M380 Group (Flash) **: Under development

TMPM3HMFDFG** TMPM3HNFDFG** TMPM3HPFDFG** TMPM3HQFDFG** Inverter Heater 512 KB TMPM3HNFDDFG** TMPM384FDFG TMPM380FDFG

TMPM3HMFZFG** TMPM3HNFZFG** TMPM3HPFZFG** TMPM3HQFZFG** 384 KB TMPM3HNFZDFG**

IGBT/MOSFET Driver TMPM3HMFYFG** TMPM3HNFYFG** TMPM3HPFYFG** TMPM3HQFYFG** TMPM3HNFYDFG** 256 KB TMPM380FYFG Photocoupler Photocoupler TMPM380FYDFG Operation Panel Control TMPM3H1FWUG** TMPM3H2FWDUG** TMPM3H3FWUG** TMPM3H4FWUG** TMPM3H5FWFG** TMPM3H6FWFG** Main Control ● LCDs TMPM3H2FWQG** TMPM3H4FWFG** TMPM3H5FWDFG** TMPM3H6FWDFG** M3H Group ● LEDs ● Key entry TMPM383FWUG TMPM380FWFG ● Timer 128 KB TMPM383FWEFG TMPM380FWDFG Radiant TMPM381FWFG Cooling Fan Heater TMPM381FWDFG

TMPM3H1FUUG** TMPM3H2FUDUG** TMPM3H3FUUG** TMPM3H4FUUG** TMPM3H5FUFG** TMPM3H6FUFG** Roaster Photocoupler 96 KB Heater TMPM3H2FUQG** TMPM3H4FUFG** TMPM3H5FUDFG** TMPM3H6FUDFG** TMPM3H0FSUG** TMPM3H1FSUG** TMPM3H2FSDUG** TMPM3H3FSUG** TMPM3H4FSUG** TMPM3H5FSFG** TMPM3H6FSFG**

TMPM3H2FSQG** TMPM3H4FSFG** TMPM3H5FSDFG** TMPM3H6FSDFG** 64 KB TMPM383FSUG ● System Block Diagram (Refrigerators) TMPM383FSEFG 48 KB TMPM3H1FPUG**

TMPM3H0FMUG** Power Supply Section 32 KB Key Input 32 pins 44 pins 48 pins 52 pins 64 pins 80 pins 100 pins 128 pins 144 pins Buzzer Output Compressor Control M Pin Count LED Outputs

Indoor Lighting: ● Evaluation Kit Driver Driver LEDs Mouser Electronics Online Shop Mouser Electronics Online Shop Three-Way Starter Kit for TMPM3HQ Starter Kit for TMPM3H6 Valve for Driver 2-Evaporator Switching ● Included hardware: ● Included hardware: TMPM3HQ evaluation board TMPM3H6 evaluation board Automatic USB cable USB cable Ice Maker Driver

Door SW Input Main Control Sensor Input M3H Group Display Section EEPROM Operation/Panel Control

C/R/F Interior Fan M Motor Driver LCD Backlight: LEDs Key Input Motor Damper M Buzzer Output Motor Driver LED Outputs

Reset IC

9 Microcontrollers Suitable for Digital Microcontrollers with USB 2.0 (Full-Speed) Equipment Applications Interfaces for Sensor Control Applications

Features Applications Features Applications

● High efficiency operation ● Digital equipment ● Incorporates functions that enable a multi-connection hub ● Printers ● Integrated dedicated HDMI 1.3a (CEC) circuit (TMPM330/TMPM332) ● Printers USB, USB Embedded Host, CAN and EtherMAC ● AV systems ● Remote control preprocessor essential for digital applications ● Home appliances ● Multi-purpose timer ● Office equipment (TMPM330/TMPM332) ● Industrial equipment ● System Block Diagram (Sensor Hub) ● System Block Diagram (Digital TV)

I2C (Slave) Sensor Hub Application TMPM066 or Flash ROM SDRAM Processor TMPM067 USB TMPM068 (Device) HDMI Tuner I2C (Master) CEC Panel Video/Audio Processor

Amp Air 3-Axis 3-Axis 3-Axis Illuminance Pressure Acceleration Gyro Geomagnetism Sensor UART Sensor Sensor Sensor Sensor Remote Controller Power Transmitter Control IR Signal CEC Receive Control Transmitter Key points LED TMPM330 In addition to USB (Full-Speed), the microcontrollers shown below incorporate various serial interfaces such as SPI*1 and I2C*2 TMPM332 (supporting Fast-Mode Plus*3). These microcontrollers can be used as a sensor hub that controls multiple sensors. Key Inputs *1: SPI: Serial Peripheral Interface *2: I2C: Inter-Integrated Circuit I2C BUS *3: Fast-mode Plus

Sound IC AV-SW EEPROM Sensor Control Sensor ● Product Lineup MCU ROM Size TX00 Series/M060 Group TX03 Series/M360 Group (Flash) ● Product Lineup TMPM368FDFG TMPM368FDXBG TMPM369FDFG TMPM369FDXBG 512 KB TMPM367FDFG TMPM367FDXBG ROM Size (Flash) TX03 Series/M330 Group TX00 Series/M030 Group TMPM366FDFG TMPM366FDXBG 256 KB TMPM366FYFG TMPM365FYXBG TMPM366FYXBG 512 KB TMPM333FDFG TMPM330FDFG TMPM330FDWFG 128 KB TMPM067FWQG TMPM068FWXBG TMPM066FWUG TMPM366FWFG 256 KB TMPM333FYFG TMPM330FYWFG TMPM330FYFG 48 pins 57 pins 64 pins 100 pins 105 pins 109 pins 144 pins 177 pins Pin Count TMPM332FWUG TMPM330FWFG TMPM333FWFG 128 KB TMPM037FWUG TMPM036FWFG ● Evaluation Kit 64 pins 100 pins Pin Count Arm Starter Kit for IAR Systems Starter Kit for ● Evaluation Kit TMPM369 TMPM369

Kiban Honpo Starter Kit for Mouser Electronics Online Shop ● Included hardware: ● Included hardware: TMPM036 Starter Kit for TMPM036 TMPM369 evaluation board TMPM369 evaluation board ULINK-ME™ IAR i-Jet Lite USB cable USB cable ● Included hardware: ● Included hardware: MDK-ARM (Microcontroller IAR Embedded Workbench for TMPM036 evaluation board TMPM036 evaluation board Development Kit) download ARM KickStart edition USB cable USB cable

Mouser Electronics Online Shop Starter Kit for TMPM066 Kiban Honpo Starter Kit for Mouser Electronics Online Shop TMPM037 Starter Kit for TMPM037 ● Included hardware: TMPM036 evaluation board ● Included hardware: ● Included hardware: USB cable TMPM037 evaluation board TMPM037 evaluation board USB cable USB cable

Kiban Honpo Starter Kit for TMPM330

● Included hardware: TMPM330 evaluation board

10 Microcontrollers Suitable for Digital Microcontrollers with USB 2.0 (Full-Speed) Equipment Applications Interfaces for Sensor Control Applications

Features Applications Features Applications

● High efficiency operation ● Digital equipment ● Incorporates functions that enable a multi-connection hub ● Printers ● Integrated dedicated HDMI 1.3a (CEC) circuit (TMPM330/TMPM332) ● Printers USB, USB Embedded Host, CAN and EtherMAC ● AV systems ● Remote control preprocessor essential for digital applications ● Home appliances ● Multi-purpose timer ● Office equipment (TMPM330/TMPM332) ● Industrial equipment ● System Block Diagram (Sensor Hub) ● System Block Diagram (Digital TV)

I2C (Slave) Sensor Hub Application TMPM066 or Flash ROM SDRAM Processor TMPM067 USB TMPM068 (Device) HDMI Tuner I2C (Master) CEC Panel Video/Audio Processor

Amp Air 3-Axis 3-Axis 3-Axis Illuminance Pressure Acceleration Gyro Geomagnetism Sensor UART Sensor Sensor Sensor Sensor Remote Controller Power Transmitter Control IR Signal CEC Receive Control Transmitter Key points LED TMPM330 In addition to USB (Full-Speed), the microcontrollers shown below incorporate various serial interfaces such as SPI*1 and I2C*2 TMPM332 (supporting Fast-Mode Plus*3). These microcontrollers can be used as a sensor hub that controls multiple sensors. Key Inputs *1: SPI: Serial Peripheral Interface *2: I2C: Inter-Integrated Circuit I2C BUS *3: Fast-mode Plus

Sound IC AV-SW EEPROM Sensor Control Sensor ● Product Lineup MCU ROM Size TX00 Series/M060 Group TX03 Series/M360 Group (Flash) ● Product Lineup TMPM368FDFG TMPM368FDXBG TMPM369FDFG TMPM369FDXBG 512 KB TMPM367FDFG TMPM367FDXBG ROM Size (Flash) TX03 Series/M330 Group TX00 Series/M030 Group TMPM366FDFG TMPM366FDXBG 256 KB TMPM366FYFG TMPM365FYXBG TMPM366FYXBG 512 KB TMPM333FDFG TMPM330FDFG TMPM330FDWFG 128 KB TMPM067FWQG TMPM068FWXBG TMPM066FWUG TMPM366FWFG 256 KB TMPM333FYFG TMPM330FYWFG TMPM330FYFG 48 pins 57 pins 64 pins 100 pins 105 pins 109 pins 144 pins 177 pins Pin Count TMPM332FWUG TMPM330FWFG TMPM333FWFG 128 KB TMPM037FWUG TMPM036FWFG ● Evaluation Kit 64 pins 100 pins Pin Count Arm Starter Kit for IAR Systems Starter Kit for ● Evaluation Kit TMPM369 TMPM369

Kiban Honpo Starter Kit for Mouser Electronics Online Shop ● Included hardware: ● Included hardware: TMPM036 Starter Kit for TMPM036 TMPM369 evaluation board TMPM369 evaluation board ULINK-ME™ IAR i-Jet Lite USB cable USB cable ● Included hardware: ● Included hardware: MDK-ARM (Microcontroller IAR Embedded Workbench for TMPM036 evaluation board TMPM036 evaluation board Development Kit) download ARM KickStart edition USB cable USB cable

Mouser Electronics Online Shop Starter Kit for TMPM066 Kiban Honpo Starter Kit for Mouser Electronics Online Shop TMPM037 Starter Kit for TMPM037 ● Included hardware: TMPM036 evaluation board ● Included hardware: ● Included hardware: USB cable TMPM037 evaluation board TMPM037 evaluation board USB cable USB cable

Kiban Honpo Starter Kit for TMPM330

● Included hardware: TMPM330 evaluation board

11 High-Performance Microcontrollers with Various Serial Interfaces Microcontrollers Supporting Diverse Applications Ranging and a High-Capacity Flash Memory from Digital Applications to Factory Automation and Office Equipment

Features Applications Features Applications ● Supports various communication interfaces ● Office equipment ● Various serial interfaces ● PC peripherals ● Embedded high-capacity flash memory ● Digital equipment ● External bus interface that can be connected to SoCs and external ● Game controllers and ● Integrated dedicated HDMI 1.3a (CEC) circuit ● Industrial controllers extended memory remote controllers ● CEC interface and remote control signal preprocessor that remain ● Printers ● System Block Diagram (AV Amplifier) active even in Low power consumption mode ● AV systems

Video Output ● System Block Diagram (Printer) CD Tuner

Video Scanner Control Display Section Heating Control User Interface Control M380 Group Video/Audio M360 Group Analog Selector M330 Group Processor M330 Group M030 Group

Scan Section Touch Display Section Engine Control Section HDMI Screen Display Sensor DVD LCD Panel Control Heating Player Drum Sensor MCU Control Heater CEC Unit Backlights LED MCU Amp Driver CCD AFE Sensor Toner PC System Control Scanner Light LED LD UART Source Driver Section LD System Control Scanner Driver TMPM461 ST Control Drum Motor MCD SoC MCD Drum TMPM462 Portable MCU Motor Audio Player System Control Section UART MCD Polygon Polygon Motor ADF ADF Engine MCD Control MCD PF Remote Motor Control Motor MCU MCU SoC Controller Power Paper RMC Sensor Memory MCD ASF Feed Supply Motor Power Unit Monitoring Option Control External Interface Sensor SPI SPI I2C Section MCU

Display Key ADF Control Power Monitoring Engine Control LED Ethernet EEPROM Tube MCU Inputs M360 Group M060 Group M360 Group M330 Group M460 Group M030 Group M030 Group

Key points The TMPM462 incorporates up to 20 channels of serial interfaces. ● Product Lineup To obtain the best performance from many serial interfaces, the TMPM462 efficiently handles various modes of communication using ROM Size TX03 Series/M360 Group three DMA units at a maximum CPU operating frequency of 120 MHz. (Flash) TMPM36BF10FG TMPM364F10FG ● Product Lineup 1 MB TMPM363F10FG TMPM362F10FG TMPM361F10FG ROM Size TX03 Series/M360 Group TX04 Series/M460 Group (Flash) TMPM368FDFG TMPM368FDXBG TMPM369FDFG TMPM369FDXBG 1.5 KB TMPM461F15FG TMPM462F15FG 512 KB TMPM367FDFG TMPM367FDXBG TMPM46BF10FG TMPM461F10FG TMPM462F10FG TMPM366FDFG TMPM366FDXBG 1 MB TMPM36BF10FG TMPM36BFYFG TMPM365FYXBG TMPM366FYXBG 256 KB 100 pins 144 pins 176 pins Pin Count TMPM366FYFG 128 KB TMPM366FWFG ● Evaluation Kit 100 pins 105 pins 109 pins 144 pins 177 pins Pin Count

IAR Systems Starter Kit for TMPM462 ● Evaluation Kit

● Included hardware: IAR Systems Starter Kit for IAR Systems Starter Kit for TMPM462 evaluation board TMPM364 TMPM366 USB cable ● Included hardware: ● Included hardware: IAR Embedded Workbench for TMPM364 evaluation board TMPM366 evaluation board ARM KickStart edition IAR i-Jet Lite USB cable USB cable IAR Embedded Workbench for ARM KickStart edition IAR Embedded Workbench for ARM KickStart edition

Arm Starter Kit for IAR Systems Starter Kit for TMPM369 TMPM369

● Included hardware: ● Included hardware: TMPM369 evaluation board TMPM369 evaluation board ULINK-ME™ IAR i-Jet Lite USB cable USB cable MDK-ARM (Microcontroller Development Kit) download IAR Embedded Workbench for ARM KickStart edition

12 High-Performance Microcontrollers with Various Serial Interfaces Microcontrollers Supporting Diverse Applications Ranging and a High-Capacity Flash Memory from Digital Applications to Factory Automation and Office Equipment

Features Applications Features Applications ● Supports various communication interfaces ● Office equipment ● Various serial interfaces ● PC peripherals ● Embedded high-capacity flash memory ● Digital equipment ● External bus interface that can be connected to SoCs and external ● Game controllers and ● Integrated dedicated HDMI 1.3a (CEC) circuit ● Industrial controllers extended memory remote controllers ● CEC interface and remote control signal preprocessor that remain ● Printers ● System Block Diagram (AV Amplifier) active even in Low power consumption mode ● AV systems

Video Output ● System Block Diagram (Printer) CD Tuner

Video Scanner Control Display Section Heating Control User Interface Control M380 Group Video/Audio M360 Group Analog Selector M330 Group Processor M330 Group M030 Group

Scan Section Touch Display Section Engine Control Section HDMI Screen Display Sensor DVD LCD Panel Control Heating Player Drum Sensor MCU Control Heater CEC Unit Backlights LED MCU Amp Driver CCD AFE Sensor Toner PC System Control Scanner Light LED LD UART Source Driver Section LD System Control Scanner Driver TMPM461 ST Control Drum Motor MCD SoC MCD Drum TMPM462 Portable MCU Motor Audio Player System Control Section UART MCD Polygon Polygon Motor ADF ADF Engine MCD Control MCD PF Remote Motor Control Motor MCU MCU SoC Controller Power Paper RMC Sensor Memory MCD ASF Feed Supply Motor Power Unit Monitoring Option Control External Interface Sensor SPI SPI I2C Section MCU

Display Key ADF Control Power Monitoring Engine Control LED Ethernet EEPROM Tube MCU Inputs M360 Group M060 Group M360 Group M330 Group M460 Group M030 Group M030 Group

Key points The TMPM462 incorporates up to 20 channels of serial interfaces. ● Product Lineup To obtain the best performance from many serial interfaces, the TMPM462 efficiently handles various modes of communication using ROM Size TX03 Series/M360 Group three DMA units at a maximum CPU operating frequency of 120 MHz. (Flash) TMPM36BF10FG TMPM364F10FG ● Product Lineup 1 MB TMPM363F10FG TMPM362F10FG TMPM361F10FG ROM Size TX03 Series/M360 Group TX04 Series/M460 Group (Flash) TMPM368FDFG TMPM368FDXBG TMPM369FDFG TMPM369FDXBG 1.5 KB TMPM461F15FG TMPM462F15FG 512 KB TMPM367FDFG TMPM367FDXBG TMPM46BF10FG TMPM461F10FG TMPM462F10FG TMPM366FDFG TMPM366FDXBG 1 MB TMPM36BF10FG TMPM36BFYFG TMPM365FYXBG TMPM366FYXBG 256 KB 100 pins 144 pins 176 pins Pin Count TMPM366FYFG 128 KB TMPM366FWFG ● Evaluation Kit 100 pins 105 pins 109 pins 144 pins 177 pins Pin Count

IAR Systems Starter Kit for TMPM462 ● Evaluation Kit

● Included hardware: IAR Systems Starter Kit for IAR Systems Starter Kit for TMPM462 evaluation board TMPM364 TMPM366 USB cable ● Included hardware: ● Included hardware: IAR Embedded Workbench for TMPM364 evaluation board TMPM366 evaluation board ARM KickStart edition IAR i-Jet Lite USB cable USB cable IAR Embedded Workbench for ARM KickStart edition IAR Embedded Workbench for ARM KickStart edition

Arm Starter Kit for IAR Systems Starter Kit for TMPM369 TMPM369

● Included hardware: ● Included hardware: TMPM369 evaluation board TMPM369 evaluation board ULINK-ME™ IAR i-Jet Lite USB cable USB cable MDK-ARM (Microcontroller Development Kit) download IAR Embedded Workbench for ARM KickStart edition

13 Microcontrollers in a Small Package Incorporating Microcontrollers with a High-Precision, High-Precision Analog Control Interfaces 24-Bit Sigma-Delta AD Converter

Features Applications Features Applications ● Up to 4 programmable servo/sequence controller (PSC) units ● Surveillance cameras ● On-chip 24-bit sigma-delta AD converter ● Smart meters (Suitable for servo computation, motor control and communication ● Camera lens ● Power calculation engine (TMPM061) ● Measuring instruments sequencing for camera shake compensation) ● Digital video cameras ● Temperature sensor (TMPM311) ● Healthcare ● High-resolution PPG for ultrasound control ● Various timers and serial interfaces ● System Block Diagram (Smart meters: Metering Unit)

● System Block Diagram (Camera Lens) Metering Unit

TMPM343 BODY Current TMPM342 Stepping Motor Sensor Autofocus Control TMPM311 Measuring Communication Gyro Sensor M Section Arm Voltage ∆Σ ADC Unit Cortex-M3 Sensor Hall Sensor Stepping Motor Amp ADC H-SW Iris Control M

PSC(*) Camera Shake Voice Coil Motor Compensation Control M Key points The microcontrollers shown below combine a 24-bit sigma-delta AD converter and Toshiba’s unique power calculation engine (PCE) to * The TMPM343 contains four PSC units. The TMPM342 contains one PSC unit. achieve accurate power measurement. These microcontrollers are suitable for smart meter and other HEMS applications as well as office equipment applications requiring power measurement.

Key points ● Product Lineup Parallel processing using up to four programmable serial controllers (PSCs) makes it possible to reduce the operating frequency. ROM Size TX00 Series/M060 Group TX03 Series/M310 Group (Flash) ● Product Lineup 128 KB TMPM061FWFG ROM Size TX03 Series/M340 Group TX04 Series/M440 Group ROM less TMPM311CHDUG (Flash) 48 pins 100 pins Pin Count 1024 KB TMPM440F10XBG 1000 KB TMPM343F10XBG 768 KB TMPM440FEXBG 512 KB TMPM341FDXBG TMPM343FDXBG 258 KB TMPM341FYXBG TMPM342FYXBG 113 pins 142 pins 162 pins 289 pins Pin Count

● Evaluation Kit

IAR Systems Starter Kit for IAR Systems Starter Kit for TMPM341 TMPM440

● Included hardware: ● Included hardware: TMPM341 evaluation board TMPM440 evaluation board USB cable IAR i-Jet Lite IAR Embedded Workbench for USB cable ARM KickStart edition IAR Embedded Workbench for ARM KickStart edition

14 Microcontrollers in a Small Package Incorporating Microcontrollers with a High-Precision, High-Precision Analog Control Interfaces 24-Bit Sigma-Delta AD Converter

Features Applications Features Applications ● Up to 4 programmable servo/sequence controller (PSC) units ● Surveillance cameras ● On-chip 24-bit sigma-delta AD converter ● Smart meters (Suitable for servo computation, motor control and communication ● Camera lens ● Power calculation engine (TMPM061) ● Measuring instruments sequencing for camera shake compensation) ● Digital video cameras ● Temperature sensor (TMPM311) ● Healthcare ● High-resolution PPG for ultrasound control ● Various timers and serial interfaces ● System Block Diagram (Smart meters: Metering Unit)

● System Block Diagram (Camera Lens) Metering Unit

TMPM343 BODY Current TMPM342 Stepping Motor Sensor Autofocus Control TMPM311 Measuring Communication Gyro Sensor M Section Arm Voltage ∆Σ ADC Unit Cortex-M3 Sensor Hall Sensor Stepping Motor Amp ADC H-SW Iris Control M

PSC(*) Camera Shake Voice Coil Motor Compensation Control M Key points The microcontrollers shown below combine a 24-bit sigma-delta AD converter and Toshiba’s unique power calculation engine (PCE) to * The TMPM343 contains four PSC units. The TMPM342 contains one PSC unit. achieve accurate power measurement. These microcontrollers are suitable for smart meter and other HEMS applications as well as office equipment applications requiring power measurement.

Key points ● Product Lineup Parallel processing using up to four programmable serial controllers (PSCs) makes it possible to reduce the operating frequency. ROM Size TX00 Series/M060 Group TX03 Series/M310 Group (Flash) ● Product Lineup 128 KB TMPM061FWFG ROM Size TX03 Series/M340 Group TX04 Series/M440 Group ROM less TMPM311CHDUG (Flash) 48 pins 100 pins Pin Count 1024 KB TMPM440F10XBG 1000 KB TMPM343F10XBG 768 KB TMPM440FEXBG 512 KB TMPM341FDXBG TMPM343FDXBG 258 KB TMPM341FYXBG TMPM342FYXBG 113 pins 142 pins 162 pins 289 pins Pin Count

● Evaluation Kit

IAR Systems Starter Kit for IAR Systems Starter Kit for TMPM341 TMPM440

● Included hardware: ● Included hardware: TMPM341 evaluation board TMPM440 evaluation board USB cable IAR i-Jet Lite IAR Embedded Workbench for USB cable ARM KickStart edition IAR Embedded Workbench for ARM KickStart edition

15 Microcontrollers with Low Power Consumption Microcontrollers for Automotive Audio Control Supporting 1.8-V Operation and Processing Applications

Features Applications Features Applications ● 1.8-V low-power mode ● AV systems ● High-performance Arm Cortex-M3 core: ● Car audio ● On-chip high-speed oscillator ● Health care equipment 96-MHz operation (max) ● Home audio ● DSP incorporated, and 144 MHz operation (max) 3 ● ● 6 2 9 5 Oscillation frequency detection (OFD) Battery-operated devices 12 1 8 4 11 7 10 ● USB and SD host controllers ● System Block Diagram (Car Audio System) ● System Block Diagram (Digital Video Camera) ● Various peripheral interfaces Peripheral Device For Bluetooth®/USB/CD/System Control Smartphone Audio Features Smartphone TMPM32BC2DFG Audio Video SD Memory Card TMPM32DC2DFG ● Audio replay by Bluetooth® connection USB Memory Bluetooth® HCI IC Memory Card ● Analog Camera Signal Hands-free speech (Echo canceling (EC) and noise reduction TC35661 LENS Front Key Tuner Flash Memory DSP Processor USB (NR) processing) End for DVC IEEE 1394 In-out Display CD servo LSI ● Audio replay from USB memory or SD card Zoom Sound Control & Output LCDC LCD panel (Various audio decoding modes by decompression) CD Motor Electronic Power Amp ● Compatible with CDDA and CD-MP3 Volume System Control ● Controls both the camera and the deck with a single chip Motor (In combination with CD servo LSI) TMPM395 OPAMP Drive DECK ● Large embedded software for controlling the camera and the deck ● System control interface (high pin count) TMPM390 Key CEC ● Product Lineup ● High performance ● Low power consumption HDMI Out SRAM Size EEPROM Flash HDMI Tx TMPM32DC2DFG CAN 2560 KB TMPM32BC2DFG TMPM32FC1EFG CAN 1664 KB TMPM32EC1EFG Key points 144 176 PKG Pin Count Audiovisual systems must be able to receive Consumer Electronics Control (CEC) commands and remote control signals even when they are off. While the predecessor microcontrollers, the TLCS-900/L1 and TLCS-870/C Series, need to keep these functions in normal operating mode even when off, the M390 Group of microcontrollers can do them in low-power mode at 32.768 kHz, significantly reducing standby power consumption. MCU Power Consumption When an AV System is in Standby Mode Significant Reduction of Standby Power 80 72.5 mW (When CEC and remote control 70 signal preprocessor are active) Automotive Microcontrollers Compliant with 60 Reduces standby Reduced to power to as low 50 43 mW 1/518 as 0.14 mW. the ISO 26262 Functional Safety Standard 40 30 Zzz... 0.14 mW Power Consumption Returns to Normal ● Product Lineup 20 mode on reception of Reduced to Part Number ROM (Flash) Size RAM Size Package Features Power Consumption (mW) 10 1/307 CEC/remote control signals. Arm Cortex-M3 plus Toshiba-original Advanced Programmable Motor Driver (A-PMD) 0 SLEEP Mode 2-channel CAN controller and 2 units of AD Converter TMP89FM42UG TMP91FW27UG TMPM395FWAXBG Functional safety: Optimized tightly coupled fault supervisors LQFP100 TMPM351F10TFG 1 MB 64 KB 144-MHz operation (max), and high temperature operation (Ta: up to 105˚C max) (14 x 14 mm) The CAN controllers and the blocks that implement functional safety contain logic specifically ● Product Lineup designed for automotive applications, making the TMPM351F10TFG suitable for motor applications in safety-related systems such as electronic power steering (EPS). ROM Size TX03 Series/M390 Group (Flash) Arm Cortex-M3 plus Toshiba-original Advanced Programmable Motor Driver (A-PMD) 3-channel CAN controller and 4 units of AD Converter 128 KB TMPM390FWFG TMPM395FWAXBG Vector engine HQFP144 Functional safety: Optimized tightly coupled fault supervisors 1 MB 64 KB 100 pins 120 pins Pin Count TMPM354F10TAFG (20 x 20 mm) Reduced part count and improved noise immunity due to Toshiba-original RDC 96-MHz operation (max), and high temperature operation (Ta: up to 125˚C max) Ideal for motor control applications in HEVs and EVs owing to enhanced motor controllers, angle ● Evaluation Kit sensor computation, in-vehicle networking, etc.

Arm Starter Kit for A sleep mode is provided in Arm Cortex-M3 allowing RAM backup (16 KB) 3-channel CAN controller and 2 units of AD Converter, 80-KB RAM including a backup RAM for 16 KB TMPM395 Functional safety: Optimized tightly coupled fault supervisors LQFP100 40-MHz operation (max), and high temperature operation (Ta: up to 105˚C max) ● TMPM358FDTFG 512 KB 80 KB Included hardware: (14 x 14 mm) The CAN controllers and the blocks that implement functional safety contain logic specifically TMPM395 evaluation board designed for automotive applications, making the TMPM358FDTFG suitable for control applications ULINK-ME™ such as battery power monitoring. USB cable MDK-ARM (Microcontroller Development Kit) download

16 Microcontrollers with Low Power Consumption Microcontrollers for Automotive Audio Control Supporting 1.8-V Operation and Processing Applications

Features Applications Features Applications ● 1.8-V low-power mode ● AV systems ● High-performance Arm Cortex-M3 core: ● Car audio ● On-chip high-speed oscillator ● Health care equipment 96-MHz operation (max) ● Home audio ● DSP incorporated, and 144 MHz operation (max) 3 ● ● 6 2 9 5 Oscillation frequency detection (OFD) Battery-operated devices 12 1 8 4 11 7 10 ● USB and SD host controllers ● System Block Diagram (Car Audio System) ● System Block Diagram (Digital Video Camera) ● Various peripheral interfaces Peripheral Device For Bluetooth®/USB/CD/System Control Smartphone Audio Features Smartphone TMPM32BC2DFG Audio Video SD Memory Card TMPM32DC2DFG ● Audio replay by Bluetooth® connection USB Memory Bluetooth® HCI IC Memory Card ● Analog Camera Signal Hands-free speech (Echo canceling (EC) and noise reduction TC35661 LENS Front Key Tuner Flash Memory DSP Processor USB (NR) processing) End for DVC IEEE 1394 In-out Display CD servo LSI ● Audio replay from USB memory or SD card Zoom Sound Control & Output LCDC LCD panel (Various audio decoding modes by decompression) CD Motor Electronic Power Amp ● Compatible with CDDA and CD-MP3 Volume System Control ● Controls both the camera and the deck with a single chip Motor (In combination with CD servo LSI) TMPM395 OPAMP Drive DECK ● Large embedded software for controlling the camera and the deck ● System control interface (high pin count) TMPM390 Key CEC ● Product Lineup ● High performance ● Low power consumption HDMI Out SRAM Size EEPROM Flash HDMI Tx TMPM32DC2DFG CAN 2560 KB TMPM32BC2DFG TMPM32FC1EFG CAN 1664 KB TMPM32EC1EFG Key points 144 176 PKG Pin Count Audiovisual systems must be able to receive Consumer Electronics Control (CEC) commands and remote control signals even when they are off. While the predecessor microcontrollers, the TLCS-900/L1 and TLCS-870/C Series, need to keep these functions in normal operating mode even when off, the M390 Group of microcontrollers can do them in low-power mode at 32.768 kHz, significantly reducing standby power consumption. MCU Power Consumption When an AV System is in Standby Mode Significant Reduction of Standby Power 80 72.5 mW (When CEC and remote control 70 signal preprocessor are active) Automotive Microcontrollers Compliant with 60 Reduces standby Reduced to power to as low 50 43 mW 1/518 as 0.14 mW. the ISO 26262 Functional Safety Standard 40 30 Zzz... 0.14 mW Power Consumption Returns to Normal ● Product Lineup 20 mode on reception of Reduced to Part Number ROM (Flash) Size RAM Size Package Features Power Consumption (mW) 10 1/307 CEC/remote control signals. Arm Cortex-M3 plus Toshiba-original Advanced Programmable Motor Driver (A-PMD) 0 SLEEP Mode 2-channel CAN controller and 2 units of AD Converter TMP89FM42UG TMP91FW27UG TMPM395FWAXBG Functional safety: Optimized tightly coupled fault supervisors LQFP100 TMPM351F10TFG 1 MB 64 KB 144-MHz operation (max), and high temperature operation (Ta: up to 105˚C max) (14 x 14 mm) The CAN controllers and the blocks that implement functional safety contain logic specifically ● Product Lineup designed for automotive applications, making the TMPM351F10TFG suitable for motor applications in safety-related systems such as electronic power steering (EPS). ROM Size TX03 Series/M390 Group (Flash) Arm Cortex-M3 plus Toshiba-original Advanced Programmable Motor Driver (A-PMD) 3-channel CAN controller and 4 units of AD Converter 128 KB TMPM390FWFG TMPM395FWAXBG Vector engine HQFP144 Functional safety: Optimized tightly coupled fault supervisors 1 MB 64 KB 100 pins 120 pins Pin Count TMPM354F10TAFG (20 x 20 mm) Reduced part count and improved noise immunity due to Toshiba-original RDC 96-MHz operation (max), and high temperature operation (Ta: up to 125˚C max) Ideal for motor control applications in HEVs and EVs owing to enhanced motor controllers, angle ● Evaluation Kit sensor computation, in-vehicle networking, etc.

Arm Starter Kit for A sleep mode is provided in Arm Cortex-M3 allowing RAM backup (16 KB) 3-channel CAN controller and 2 units of AD Converter, 80-KB RAM including a backup RAM for 16 KB TMPM395 Functional safety: Optimized tightly coupled fault supervisors LQFP100 40-MHz operation (max), and high temperature operation (Ta: up to 105˚C max) ● TMPM358FDTFG 512 KB 80 KB Included hardware: (14 x 14 mm) The CAN controllers and the blocks that implement functional safety contain logic specifically TMPM395 evaluation board designed for automotive applications, making the TMPM358FDTFG suitable for control applications ULINK-ME™ such as battery power monitoring. USB cable MDK-ARM (Microcontroller Development Kit) download

17 TZ1000 and TZ1200 ApP Lite Application Processor TZ2100 ApP Lite Application Processor Series Series for IoT and Wearable Device Applications for Industrial Applications

Features Applications Features Applications ● High-precision analog signal sensing (AFE) ● Wearable devices ● 600-MHz Arm Cortex-A9 ● Smart home appliances ● Power-efficient and therefore provides long battery life ● Bio-sensing devices ● Various middleware for RTOS and Linux ● Industrial equipment ● Middleware for estimating the amount of physical activity, sleep conditions, heart rates ● Various IoT edge devices ● Voice command and voice synthesis middleware for RTOS and Linux ● Office equipment and ECG ● System Block Diagram ● System Block Diagram

® Home appliance Bluetooth low energy user interfaces connection to Smartphone DDR3 Normal Operation Clock 26 MHz 32 KHz RTC Clock e-MMC x16

BPF TZ1000 GPS Charger Module MIC IC Accelero meter Wi-Fi ® / NFC Bluetooth ® Magneto meter Mic low energy BAT Gyro Pressure 35 mAh~ Audio Codec Depends on usecase Thermal

Other sensors TZ2100

HP BTN LED Camera Industrial equipment user interfaces

● High-Precision Analog Front-End (AFE) WVGA Panel

High-precision measurement of voltage, Company Company Company Keyboard PHY (GPIO) USB current and impedance A BC TZ1000 TZ1200 Ethernet High-Precision Voltage: AFE Heart rate measurement

Current: Pulse rate Attractive Middleware for RTOS and Linux measurement Toshiba offers voice command middleware for the TZ2100 series, which allows hands-free operation of equipment. TZ1000 Impedance: The TZ2100 series also supports the ToSpeak voice synthesis middleware from Toshiba Digital Solutions Corporation that is popular for TZ1200 Body composition application to car navigation systems. measurement ● Product Lineup Operating Part Number CPU Core Frequency SRAM Differentiating Features

● Incorporates an LCD panel interface, a camera interface, encryption functions and 300 MHz TZ2100XBG various networking functions

● ● Product Lineup 1 MByte Provides ToSpeak™, speech synthesis middleware suitable for voice guidance TZ2101XBG Arm Cortex-A9 +2 Kbyte (Back-up) applications Part Number CPU Core Operating Frequency SRAM Differentiating Features 600 MHz ● Incorporates a general-purpose parallel interface to which various peripheral ICs can be connected

TZ2102XBG ● TZ1011MBG ● Acquires various sensed data with a high-precision 24-bit sigma-delta AD converter Achieves rich and smooth rendering with a 2D graphics accelerator ● Transmits data to a network via Bluetooth® low energy technology TZ1021MBG Arm® Cortex®-M4 48 MHz 288 KByte ● Reduces system size due to single-package integration of various sensors (acceleration, TZ1031MBG with FPU angular speed and geomagnetism) TZ1041MBG ● Low-power design 65 µA/MHz

● Achieves rich and smooth rendering with a 2D graphics accelerator ● Large-capacity SRAMs (1.1-MB SRAM for the CPU and 1-MB display SRAM): Eliminates Arm® Cortex®-M4 96 MHz 2.2 MByte the need for DRAM to build a display system TZ1201XBG with FPU (Up to 120 MHz) ● Low-power design 70 µA/MHz: Allows battery operation ● High-precision 24-bit sigma-delta AD converter capable of measuring impedance

*1: These values are design targets at an ambient temperature of 25°C. Power consumption may differ depending on the ambient conditions.

18 TZ1000 and TZ1200 ApP Lite Application Processor TZ2100 ApP Lite Application Processor Series Series for IoT and Wearable Device Applications for Industrial Applications

Features Applications Features Applications ● High-precision analog signal sensing (AFE) ● Wearable devices ● 600-MHz Arm Cortex-A9 ● Smart home appliances ● Power-efficient and therefore provides long battery life ● Bio-sensing devices ● Various middleware for RTOS and Linux ● Industrial equipment ● Middleware for estimating the amount of physical activity, sleep conditions, heart rates ● Various IoT edge devices ● Voice command and voice synthesis middleware for RTOS and Linux ● Office equipment and ECG ● System Block Diagram ● System Block Diagram

® Home appliance Bluetooth low energy user interfaces connection to Smartphone DDR3 Normal Operation Clock 26 MHz 32 KHz RTC Clock e-MMC x16

BPF TZ1000 GPS Charger Module MIC IC Accelero meter Wi-Fi ® / NFC Bluetooth ® Magneto meter Mic low energy BAT Gyro Pressure 35 mAh~ Audio Codec Depends on usecase Thermal

Other sensors TZ2100

HP BTN LED Camera Industrial equipment user interfaces

● High-Precision Analog Front-End (AFE) WVGA Panel

High-precision measurement of voltage, Company Company Company Keyboard PHY (GPIO) USB current and impedance A BC TZ1000 TZ1200 Ethernet High-Precision Voltage: AFE Heart rate measurement

Current: Pulse rate Attractive Middleware for RTOS and Linux measurement Toshiba offers voice command middleware for the TZ2100 series, which allows hands-free operation of equipment. TZ1000 Impedance: The TZ2100 series also supports the ToSpeak voice synthesis middleware from Toshiba Digital Solutions Corporation that is popular for TZ1200 Body composition application to car navigation systems. measurement ● Product Lineup Operating Part Number CPU Core Frequency SRAM Differentiating Features

● Incorporates an LCD panel interface, a camera interface, encryption functions and 300 MHz TZ2100XBG various networking functions

● ● Product Lineup 1 MByte Provides ToSpeak™, speech synthesis middleware suitable for voice guidance TZ2101XBG Arm Cortex-A9 +2 Kbyte (Back-up) applications Part Number CPU Core Operating Frequency SRAM Differentiating Features 600 MHz ● Incorporates a general-purpose parallel interface to which various peripheral ICs can be connected

TZ2102XBG ● TZ1011MBG ● Acquires various sensed data with a high-precision 24-bit sigma-delta AD converter Achieves rich and smooth rendering with a 2D graphics accelerator ● Transmits data to a network via Bluetooth® low energy technology TZ1021MBG Arm® Cortex®-M4 48 MHz 288 KByte ● Reduces system size due to single-package integration of various sensors (acceleration, TZ1031MBG with FPU angular speed and geomagnetism) TZ1041MBG ● Low-power design 65 µA/MHz

● Achieves rich and smooth rendering with a 2D graphics accelerator ● Large-capacity SRAMs (1.1-MB SRAM for the CPU and 1-MB display SRAM): Eliminates Arm® Cortex®-M4 96 MHz 2.2 MByte the need for DRAM to build a display system TZ1201XBG with FPU (Up to 120 MHz) ● Low-power design 70 µA/MHz: Allows battery operation ● High-precision 24-bit sigma-delta AD converter capable of measuring impedance

*1: These values are design targets at an ambient temperature of 25°C. Power consumption may differ depending on the ambient conditions.

19 Support for Arm Ecosystem Ecosystem partners for development environments

Arm Ecosystem-based support and maintenance, You can choose among a wide range of development tool partners for Arm-based microcontroller development systems. Choose the best development tools and partners that suit your needs. encompassing everything from the selection of an MCU to mass production

Toshiba collaborates with Arm ecosystem partners to provide various tools and development environments, as well as technical information, services and sales support. Tools support designers from conception to completion, ranging from microcontroller selection to mass production.

Technical support Consultation on the Ecosystem partnership for MCUs selection of a development environment

Selection of an MCU and detailed Toshiba provides information on various Toshiba offers support services product specifications development environments, tools and in cooperation with Arm Ecosystem partners necessary for system development Various types of benchmarking partners according to your specific needs. and mass production of your MCU. Support for technical studies (hardware and software)

Toshiba Customers Arm Partners

Technical support Development tools

Consultation on a development environment Compilers

Development of various solutions Debuggers/ICEs

Information about reference models Flash writers Customer support for MCU development Robust collaboration Starter kits Customer support for software development Real-time operating systems (RTOS)

Sample programs and drivers Middleware

Application notes Verification tools Seminars TX and TXZ Family Flash programming services Visit the websites of ecosystem partners for details of their products and services. Website of Toshiba Electronic Devices & Storage Corporation: https://toshiba.semicon-storage.com/ap-en/product/microcomputer/designsupport/partner-list.html Semiconductor & Storage Products Home > Products > Microcomputer > Design / Support > Partner Information

20 Support for Arm Ecosystem Ecosystem partners for development environments

You can choose among a wide range of development tool partners for Arm-based microcontroller development systems. Choose the best development tools and partners that suit your needs.

Visit the websites of ecosystem partners for details of their products and services. Website of Toshiba Electronic Devices & Storage Corporation: https://toshiba.semicon-storage.com/ap-en/product/microcomputer/designsupport/partner-list.html Semiconductor & Storage Products Home > Products > Microcomputer > Design / Support > Partner Information

21 Application Notes and Sample Programs Evaluation Kits and Reference Boards

Our website provides application notes and sample programs that customers can use as a reference to evaluate the functionality of our Evaluation Kits microcontrollers and develop applications. In order to evaluate whether to use Toshiba’s microcontroller, it is advisable to use an entry-level evaluation kit (such as a starter kit) to start software development. Starter kits are available from development environment and evaluation kit vendors. Sample Programs Various evaluation kits are available, ranging from the kits that are bundled with an IDE and an emulator to those that are compliant with Driver source code : Setup program containing sequences for operating various IP cores. an on-board emulator standard called CMSIS-DAP. Synonymous with peripheral driver and MCU hardware abstraction layer (MCU HAL). Moreover, feature-rich solution packages incorporating peripheral functions are also available. For detailed information, contact a partner Sample drivers : Sample embedded programs for operating the HAL and IP cores. listed in the “Boards/Evaluation Kits” column of the “Evaluation Environment Ecosystems” table on the previous page. For evaluation kits supported by each microcontroller, see the pages that describe individual microcontrollers. Sample drivers can run on starter kits and other boards for each microcontroller. The following photographs were taken for inclusion in this brochure and may differ from actual products. Sample projects : Genuine MDK-Arm software development environment and IAR Systems’ EWARM project. For the contents and details of evaluation boards, please contact tool vendors. You can verify operation with a development environment and a starter kit.

Genuine MDK-Arm development environment IAR Systems’ EWARM development environment Arm Starter Kit for TMPM369 Arm Starter Kit for TMPM395

● Included hardware: ● Included hardware: TMPM369 evaluation board TMPM395 evaluation board ULINK-ME™ ULINK-ME™ USB cable USB cable MDK-ARM (Microcontroller MDK-ARM (Microcontroller Development Kit) download Development Kit) download

● Key features ● Key features ● USB Embedded Host connector ● USB connector (Mini-B) ● USB/UART serial converter ● SD/MMC card slot (SSP) ● Ethernet connector ● CAN interface ● HDMI interface (CEC) ● Potentiometer input analog signal ● 2 RS232 drivers (UART) ● Potentiometer input analog signal ● 6 push buttons ● 2 user LEDs ● 6 push buttons ● 4 user LEDs ● DC power jack ● CR1220 lithium-ion battery ● Power LED

IAR Systems Starter Kit for TMPM341 IAR Systems Starter Kit for TMPM364

● Included hardware: ● Included hardware: ● Features ● Features TMPM341 evaluation board TMPM364 evaluation board ● Incorporates a genuine Arm compiler ● Development environment from a compiler vendor USB cable IAR i-Jet Lite IAR Embedded Workbench for USB cable ● MDK-TOSHIBA dedicated to Toshiba’s microcontrollers ● Available under various licensing schemes, ARM KickStart edition IAR Embedded Workbench for ARM KickStart edition One-year license, low cost, and full versions are also available. including a free evaluation edition ● Key features ● Support for ICE, static analysis and other tools ● USB/UART serial converter ● Key features ● Optical rotary encoder ● USB/UART serial converter ● USB Embedded Host connector ● Potentiometer (slider) ● CAN interface ● Potentiometer input analog signal ● Tactile switch ● 12-MHz crystal oscillator ● 32-kHz crystal oscillator Application notes and sample programs are available for download at: ● 1 user LED ● Tactile switch ● Reset button ● Power LED ● 8 user LEDs ● Power LED https://toshiba.semicon-storage.com/ap-en/product/microcomputer/designsupport/applicationnote-read-me.html Semiconductor & Storage Products Home > Products > Microcomputer > Design / Support > Application Notes / Sample Programs IAR Systems Starter Kit for TMPM366 IAR Systems Starter Kit for TMPM369

● Included hardware: ● Included hardware: TMPM366 evaluation board TMPM369 evaluation board USB cable IAR i-Jet Lite IAR Embedded Workbench for USB cable ARM KickStart edition IAR Embedded Workbench for ARM KickStart edition ● Key features ● USB/UART serial converter ● USB connector ● Key features ● 2 UART interfaces ● SD card slot (SSP) ● USB Embedded Host connector ● USB connector ● Potentiometer input analog signal ● 2 tactile switches ● Ethernet connector ● CAN interface ● Reset button ● 12-MHz crystal oscillator ● 2 UART interfaces ● LCD module ● 8 user LEDs ● Power LED ● Joystick ● SD card slot (SSP) ● Reset button ● 8 user LEDs ● Power LED ● DC power jack

22 Application Notes and Sample Programs Evaluation Kits and Reference Boards

Our website provides application notes and sample programs that customers can use as a reference to evaluate the functionality of our Evaluation Kits microcontrollers and develop applications. In order to evaluate whether to use Toshiba’s microcontroller, it is advisable to use an entry-level evaluation kit (such as a starter kit) to start software development. Starter kits are available from development environment and evaluation kit vendors. Sample Programs Various evaluation kits are available, ranging from the kits that are bundled with an IDE and an emulator to those that are compliant with Driver source code : Setup program containing sequences for operating various IP cores. an on-board emulator standard called CMSIS-DAP. Synonymous with peripheral driver and MCU hardware abstraction layer (MCU HAL). Moreover, feature-rich solution packages incorporating peripheral functions are also available. For detailed information, contact a partner Sample drivers : Sample embedded programs for operating the HAL and IP cores. listed in the “Boards/Evaluation Kits” column of the “Evaluation Environment Ecosystems” table on the previous page. For evaluation kits supported by each microcontroller, see the pages that describe individual microcontrollers. Sample drivers can run on starter kits and other boards for each microcontroller. The following photographs were taken for inclusion in this brochure and may differ from actual products. Sample projects : Genuine MDK-Arm software development environment and IAR Systems’ EWARM project. For the contents and details of evaluation boards, please contact tool vendors. You can verify operation with a development environment and a starter kit.

Genuine MDK-Arm development environment IAR Systems’ EWARM development environment Arm Starter Kit for TMPM369 Arm Starter Kit for TMPM395

● Included hardware: ● Included hardware: TMPM369 evaluation board TMPM395 evaluation board ULINK-ME™ ULINK-ME™ USB cable USB cable MDK-ARM (Microcontroller MDK-ARM (Microcontroller Development Kit) download Development Kit) download

● Key features ● Key features ● USB Embedded Host connector ● USB connector (Mini-B) ● USB/UART serial converter ● SD/MMC card slot (SSP) ● Ethernet connector ● CAN interface ● HDMI interface (CEC) ● Potentiometer input analog signal ● 2 RS232 drivers (UART) ● Potentiometer input analog signal ● 6 push buttons ● 2 user LEDs ● 6 push buttons ● 4 user LEDs ● DC power jack ● CR1220 lithium-ion battery ● Power LED

IAR Systems Starter Kit for TMPM341 IAR Systems Starter Kit for TMPM364

● Included hardware: ● Included hardware: ● Features ● Features TMPM341 evaluation board TMPM364 evaluation board ● Incorporates a genuine Arm compiler ● Development environment from a compiler vendor USB cable IAR i-Jet Lite IAR Embedded Workbench for USB cable ● MDK-TOSHIBA dedicated to Toshiba’s microcontrollers ● Available under various licensing schemes, ARM KickStart edition IAR Embedded Workbench for ARM KickStart edition One-year license, low cost, and full versions are also available. including a free evaluation edition ● Key features ● Support for ICE, static analysis and other tools ● USB/UART serial converter ● Key features ● Optical rotary encoder ● USB/UART serial converter ● USB Embedded Host connector ● Potentiometer (slider) ● CAN interface ● Potentiometer input analog signal ● Tactile switch ● 12-MHz crystal oscillator ● 32-kHz crystal oscillator Application notes and sample programs are available for download at: ● 1 user LED ● Tactile switch ● Reset button ● Power LED ● 8 user LEDs ● Power LED https://toshiba.semicon-storage.com/ap-en/product/microcomputer/designsupport/applicationnote-read-me.html Semiconductor & Storage Products Home > Products > Microcomputer > Design / Support > Application Notes / Sample Programs IAR Systems Starter Kit for TMPM366 IAR Systems Starter Kit for TMPM369

● Included hardware: ● Included hardware: TMPM366 evaluation board TMPM369 evaluation board USB cable IAR i-Jet Lite IAR Embedded Workbench for USB cable ARM KickStart edition IAR Embedded Workbench for ARM KickStart edition ● Key features ● USB/UART serial converter ● USB connector ● Key features ● 2 UART interfaces ● SD card slot (SSP) ● USB Embedded Host connector ● USB connector ● Potentiometer input analog signal ● 2 tactile switches ● Ethernet connector ● CAN interface ● Reset button ● 12-MHz crystal oscillator ● 2 UART interfaces ● LCD module ● 8 user LEDs ● Power LED ● Joystick ● SD card slot (SSP) ● Reset button ● 8 user LEDs ● Power LED ● DC power jack

23 Evaluation Kits and Reference Boards

IAR Systems Starter Kit for TMPM370 IAR Systems Starter Kit for TMPM375 Mouser Electronics Online Shop Starter Kit for TMPM066 Kiban Honpo Starter Kit for TMPM036

● Included hardware: ● Included hardware: ● Included hardware: ● Included hardware: TMPM036 evaluation board TMPM370 evaluation board TMPM375 evaluation board TMPM066 evaluation board USB cable IAR i-Jet Lite IAR i-Jet Lite USB cable USB cable USB cable ● Key features IAR Embedded Workbench for Brushless DC motors ● Key features ● Arduino-compatible connector ARM KickStart edition IAR Embedded Workbench for ● Arduino-compatible connector ● CMSIS-DAP debugger ARM KickStart edition ● CMSIS-DAP debugger ● USB-UART ● Key features ● USB-UART ● UART ● Isolated JTAG interface ● Key features ● UART ● Volume ● 4 tactile switches ● 24 VDC/9 A inverter ● 4 DAC outputs for debugging ● Push switch ● Push switch ● Reset button ● DC power supply and ● 3-shunt and 1-shunt current-sense circuits ● Reset switch ● Reset switch ● 3 user LEDs terminals for 3-phase motor ● USB-to-UART conversion (Mini-B) ● Pin header for boot-mode control ● Pin header for boot-mode control ● DC power jack ● Tactile switch ● Slide volume ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input) ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input)

IAR Systems Starter Kit for TMPM440 IAR Systems Starter Kit for TMPM462 Kiban Honpo Starter Kit for TMPM037 Kiban Honpo Starter Kit for TMPM330

● Included hardware: ● Included hardware: TMPM462 evaluation board ● Included hardware: ● Included hardware: TMPM440 evaluation board USB cable TMPM037 evaluation board TMPM330 evaluation board IAR i-Jet Lite IAR Embedded Workbench for USB cable USB cable ARM KickStart edition ● Key features IAR Embedded Workbench for ● Key features ● IAR’s JTAG specification ARM KickStart edition ● Key features ● CMSIS-DAP debugger ● Shield connector for Arduino ● USB/UART serial converter ● USB-UART ● Key features ● Current measurement terminal ● Volume ● USB/UART serial converter ● Slide volume ● Push switch ● 2 potentiometer input analog signals ● Reset switch ● Reset switch ● Reset switch ● 8 push switches ● 4 user LEDs ● Pin header for boot-mode control ● Power LED ● 8 user LEDs ● Power LED ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input) ● 2-phase encoder ● DC power jack ● DC power jack

ESP Starter Kit for TMPM37A ESP Starter Kit for TMPM475

● Included hardware: ● Included hardware: TMPM475 evaluation board TMPM37A evaluation board Brushless DC motors Brushless DC motors Reference Boards ● Key features ● Key features ● Sensorless 3-shunt and 1-shunt resistor circuits In order to help you evaluate whether to use Toshiba’s microcontroller, Toshiba offers reference boards that allow you to evaluate the ● Selectable from 3-shunt resistor circuitry ● SIO/UART (external amp only) and 1-shunt resistor circuitry ● CAN (isolation) functionality of its microcontrollers in the real-world environment. (that allows either an internal or an external amp to be selected) ● External amp ● USB (isolation: CP2102) ● 12-bit DAC x 4 ● 12-bit DAC x 4 ● Analog (slide volume resistor input) Contact your local Toshiba sales representative when you have decided on your system applications and need to create a system ● Analog (slide volume resistor input) ● LED (for DAC monitoring) ● 4 tactile switches ● External op-amp quickly. ● 1 reset switch ● 20-pin JTAG half-pitch socket ● On-board CMSIS-DAP ● 1 reset switch ● 1 tactile switch (only for SWD connection) ● DAC (SIO) for communication ● LED connection ● 20-pin JTAG half-pitch socket

Mouser Electronics Online Shop Starter Kit for TMPM3H6 Mouser Electronics Online Shop Starter Kit for TMPM3HQ

● Included hardware: ● Included hardware: TMPM3H6 evaluation board TMPM3HQ evaluation board USB cable USB cable

● Key features ● Key features ● Arduino-compatible connector ● CMSIS-DAP debugger ● Arduino-compatible connector ● CMSIS-DAP debugger ● USB-UART ● UART ● AD converter ● USB-UART ● UART ● DA converter ● Thermistor ● AD converter ● DA converter ● Remote control receiver ● Push switch ● Thermistor ● Remote control receiver ● Reset switch ● Pin header for boot-mode control ● 6-axis sensor ● Push switch ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input) ● Reset switch ● Pin header for boot-mode control ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input)

Mouser Electronics Online Shop Starter Kit for TMPM036 Mouser Electronics Online Shop Starter Kit for TMPM037

● Included hardware: TMPM036 evaluation board ● Included hardware: USB cable TMPM037 evaluation board USB cable ● Key features ● Arduino-compatible connector ● Key features ● CMSIS-DAP debugger ● CMSIS-DAP debugger ● USB-UART ● USB-UART ● UART ● Volume ● Volume ● Push switch ● Push switch ● Reset switch ● Reset switch ● Pin header for boot-mode control ● Pin header for boot-mode control ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input) ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input)

24 Evaluation Kits and Reference Boards

IAR Systems Starter Kit for TMPM370 IAR Systems Starter Kit for TMPM375 Mouser Electronics Online Shop Starter Kit for TMPM066 Kiban Honpo Starter Kit for TMPM036

● Included hardware: ● Included hardware: ● Included hardware: ● Included hardware: TMPM036 evaluation board TMPM370 evaluation board TMPM375 evaluation board TMPM066 evaluation board USB cable IAR i-Jet Lite IAR i-Jet Lite USB cable USB cable USB cable ● Key features IAR Embedded Workbench for Brushless DC motors ● Key features ● Arduino-compatible connector ARM KickStart edition IAR Embedded Workbench for ● Arduino-compatible connector ● CMSIS-DAP debugger ARM KickStart edition ● CMSIS-DAP debugger ● USB-UART ● Key features ● USB-UART ● UART ● Isolated JTAG interface ● Key features ● UART ● Volume ● 4 tactile switches ● 24 VDC/9 A inverter ● 4 DAC outputs for debugging ● Push switch ● Push switch ● Reset button ● DC power supply and ● 3-shunt and 1-shunt current-sense circuits ● Reset switch ● Reset switch ● 3 user LEDs terminals for 3-phase motor ● USB-to-UART conversion (Mini-B) ● Pin header for boot-mode control ● Pin header for boot-mode control ● DC power jack ● Tactile switch ● Slide volume ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input) ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input)

IAR Systems Starter Kit for TMPM440 IAR Systems Starter Kit for TMPM462 Kiban Honpo Starter Kit for TMPM037 Kiban Honpo Starter Kit for TMPM330

● Included hardware: ● Included hardware: TMPM462 evaluation board ● Included hardware: ● Included hardware: TMPM440 evaluation board USB cable TMPM037 evaluation board TMPM330 evaluation board IAR i-Jet Lite IAR Embedded Workbench for USB cable USB cable ARM KickStart edition ● Key features IAR Embedded Workbench for ● Key features ● IAR’s JTAG specification ARM KickStart edition ● Key features ● CMSIS-DAP debugger ● Shield connector for Arduino ● USB/UART serial converter ● USB-UART ● Key features ● Current measurement terminal ● Volume ● USB/UART serial converter ● Slide volume ● Push switch ● 2 potentiometer input analog signals ● Reset switch ● Reset switch ● Reset switch ● 8 push switches ● 4 user LEDs ● Pin header for boot-mode control ● Power LED ● 8 user LEDs ● Power LED ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input) ● 2-phase encoder ● DC power jack ● DC power jack

ESP Starter Kit for TMPM37A ESP Starter Kit for TMPM475

● Included hardware: ● Included hardware: TMPM475 evaluation board TMPM37A evaluation board Brushless DC motors Brushless DC motors Reference Boards ● Key features ● Key features ● Sensorless 3-shunt and 1-shunt resistor circuits In order to help you evaluate whether to use Toshiba’s microcontroller, Toshiba offers reference boards that allow you to evaluate the ● Selectable from 3-shunt resistor circuitry ● SIO/UART (external amp only) and 1-shunt resistor circuitry ● CAN (isolation) functionality of its microcontrollers in the real-world environment. (that allows either an internal or an external amp to be selected) ● External amp ● USB (isolation: CP2102) ● 12-bit DAC x 4 ● 12-bit DAC x 4 ● Analog (slide volume resistor input) Contact your local Toshiba sales representative when you have decided on your system applications and need to create a system ● Analog (slide volume resistor input) ● LED (for DAC monitoring) ● 4 tactile switches ● External op-amp quickly. ● 1 reset switch ● 20-pin JTAG half-pitch socket ● On-board CMSIS-DAP ● 1 reset switch ● 1 tactile switch (only for SWD connection) ● DAC (SIO) for communication ● LED connection ● 20-pin JTAG half-pitch socket

Mouser Electronics Online Shop Starter Kit for TMPM3H6 Mouser Electronics Online Shop Starter Kit for TMPM3HQ

● Included hardware: ● Included hardware: TMPM3H6 evaluation board TMPM3HQ evaluation board USB cable USB cable

● Key features ● Key features ● Arduino-compatible connector ● CMSIS-DAP debugger ● Arduino-compatible connector ● CMSIS-DAP debugger ● USB-UART ● UART ● AD converter ● USB-UART ● UART ● DA converter ● Thermistor ● AD converter ● DA converter ● Remote control receiver ● Push switch ● Thermistor ● Remote control receiver ● Reset switch ● Pin header for boot-mode control ● 6-axis sensor ● Push switch ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input) ● Reset switch ● Pin header for boot-mode control ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input)

Mouser Electronics Online Shop Starter Kit for TMPM036 Mouser Electronics Online Shop Starter Kit for TMPM037

● Included hardware: TMPM036 evaluation board ● Included hardware: USB cable TMPM037 evaluation board USB cable ● Key features ● Arduino-compatible connector ● Key features ● CMSIS-DAP debugger ● CMSIS-DAP debugger ● USB-UART ● USB-UART ● UART ● Volume ● Volume ● Push switch ● Push switch ● Reset switch ● Reset switch ● Pin header for boot-mode control ● Pin header for boot-mode control ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input) ● Selectable power supply (DC jack input, USB-to-UART input or DAP USB input)

25 Microcomputer web page Part Numbering Nomenclature

The Toshiba Microcomputer web page provides the latest information on our products. Website of Toshiba Electronic Devices & Storage Corporation: Toshiba microcontroller https://toshiba.semicon-storage.com/ap-en/product/microcomputer.html

1

3

4

2

5

6 7

1 Various search facilities 2 News 5 Development Support Product detail

The following search The latest news and new product Provides application notes and Detailed product information engines are available: highlights are available here. sample programs to assist you in is accessible via the Search understanding Toshiba’s ● box ( 1 ) and Products Lineup Part number search microcontrollers and creating You can find information about software ( 4 ). any of our products by typing in For details, see page 22. For each product, specifications a few characters of the part and other technical documents number. are available. ● Parametric search ● Datasheets You can progressively narrow 3 Recommended Products 6 Toshiba MCU Park ● Product overview down a list of products by Shows updates on existing Explains the underlying ● Product specifications choosing a product category products as well as information technologies that power Toshiba’s ● Development systems and your electrical requirements. about products under development microcontrollers. ● ● Cross Reference Search that may interest you. Ordering and sample request As soon as you type in a few ● Documentation characters of the part number of ● Related links another company’s product, a Evaluation Kits and Reference Boards list of Toshiba products with Application Notes / Sample Programs similar specifications appears. 4 Product Lineup 7 SNS & Movie Library Partner Information ● Keyword Search You can search for information Describes the features and Presents a selection of movies and that includes arbitrary word(s). characteristics of Toshiba’s articles from those posted on our microcontroller series. YouTube and Facebook pages. ● Stock Check Search Allows you to check if catalog distributors have the specified Toshiba product in stock and to purchase it.

26 Microcomputer web page Part Numbering Nomenclature

The Toshiba Microcomputer web page provides the latest information on our products. Example 1 UGxx60SF89TMP Website of Toshiba Electronic Devices & Storage Corporation: Toshiba microcontroller https://toshiba.semicon-storage.com/ap-en/product/microcomputer.html Package QG : Plastic shrink quad outline non-leaded package (VQON); dry-packed XBG : Plastic ball grid array (BGA); dry-packed WBG : Wafer-level chip size package (WCSP); dry-packed UG, DUG, FG, DFG : Plastic quad flat package (QFP); dry-packed 1 MG, DMG : Plastic small-outline package (SOP); dry-packed NG : Plastic shrink dual-in-line package (SDIP) Automotive quality grade R : Grade A, −40˚C to +85˚C T : Grade A, −40˚C to +125˚C I : Grade B, −40˚C to +85˚C 3 S : Grade B, −40˚C to +125˚C Microcontroller revision 4 Microcontroller subtype ROM size 1 2 3 4 6 8 C H KB1 2 3 4 6 81216 KMNPSUWFYZD KB 24 32 40 48 60/64 96 124/128 192 256 384 512

ROM type C : Mask 2 E : EEPROM F : Flash P : OTP Microcontroller core 89: 870/C1 5 92: 900/H1

Toshiba microcontrollers

6 7 Example 2 M3TMP XBGxxDF69

Package QG : Plastic shrink quad outline non-leaded package (VQON); dry-packed 1 Various search facilities 2 News 5 Development Support Product detail XBG : Plastic ball grid array (BGA, FBGA, TFBGA, VFBGA); dry-packed UG, FG, DFG : Plastic quad flat package (QFP, LQFP, HQFP); dry-packed The following search The latest news and new product Provides application notes and Detailed product information MG, DMG : Plastic small-outline package (SOP); dry-packed engines are available: highlights are available here. sample programs to assist you in is accessible via the Search NG : Plastic shrink dual-in-line package (SDIP) understanding Toshiba’s ● Part number search box ( 1 ) and Products Lineup microcontrollers and creating Automotive quality grade You can find information about software ( 4 ). any of our products by typing in R : Grade A, −40˚C to +85˚C For details, see page 22. For each product, specifications a few characters of the part T : Grade A, −40˚C to +125˚C and other technical documents number. I : Grade B, −40˚C to +85˚C are available. S : Grade B, −40˚C to +125˚C ● Parametric search ● Datasheets You can progressively narrow 3 Recommended Products 6 Toshiba MCU Park ● Product overview Microcontroller revision down a list of products by Shows updates on existing Explains the underlying ● Product specifications choosing a product category products as well as information technologies that power Toshiba’s ● Development systems ROM size and your electrical requirements. about products under development microcontrollers. ● H M R SW Y Z D E101520 ● Cross Reference Search that may interest you. Ordering and sample request ● KB 16 32 56 64 128 256 384 512 768 1024 1536 2048 As soon as you type in a few Documentation characters of the part number of ● Related links ROM type another company’s product, a Evaluation Kits and Reference Boards C : Mask list of Toshiba products with Application Notes / Sample Programs F : Flash similar specifications appears. 4 Product Lineup 7 SNS & Movie Library Partner Information ● Keyword Search Microcontroller subtype You can search for information Describes the features and Presents a selection of movies and Microcontroller core that includes arbitrary word(s). characteristics of Toshiba’s articles from those posted on our M0: 00 M3: Z3, 03 M4: Z4, 04 R4: 04R 19A: 19A, 19A/H1 microcontroller series. YouTube and Facebook pages. ● Stock Check Search Allows you to check if catalog Toshiba microcontrollers distributors have the specified Toshiba product in stock and to purchase it.

27 SUBSIDIARIES AND AFFILIATES (As of July 1, 2017)

Toshiba America Toshiba Electronics Europe GmbH Toshiba Electronics Asia, Ltd. Nov. 2017 Semiconductor Catalog Nov. 2017 Electronic Components, Inc. • Düsseldorf Head Office Tel: 2375-6111 Fax: 2375-0969 • Irvine, Headquarters Tel: (0211)5296-0 Fax: (0211)5296-400 Toshiba Electronics (China) Co., Ltd. BCE0085H Tel: (949)462-7700 Fax: (949)462-2200 • France Branch • Shanghai Head Office • Buffalo Grove (Chicago) Tel: (1)47282181 Tel: (021)6139-3888 Fax: (021)6190-8288 Tel: (847)484-2400 Fax: (847)541-7287 • Italy Branch • Beijing Branch • Duluth/Atlanta Tel: (039)68701 Fax:(039)6870205 Tel: (010)6590-8796 Fax: (010)6590-8791 Tel: (404)639-9520 Fax: (404)634-4434 • Munich Office • Chengdu Branch • El Paso Tel: (089)20302030 Fax: (089)203020310 Tel: (028)8675-1773 Fax: (028)8675-1065 Tel: (915)533-4242 • Spain Branch • Hangzhou Office • Marlborough Tel: (91)660-6794 Tel: (0571)8717-5004 Fax: (0571)8717-5013 Tel: (508)481-0034 Fax: (508)481-8828 • Sweden Branch • Nanjing Office • Parsippany Tel: (08)704-0900 Fax: (08)80-8459 Tel: (025)8689-0070 Fax: (025)5266-5106 Tel: (973)541-4715 Fax: (973)541-4716 • U.K. Branch • Qingdao Branch 32-Bit Microcontrollers • San Jose Tel: (1932)841600 Tel: (532)8579-3328 Fax: (532)8579-3329 Tel: (408)526-2400 Fax: (408)526-2410 Toshiba Electronics Asia (Singapore) Pte. Ltd. • Shenzhen Branch • Wixom (Detroit) Tel: (65)6278-5252 Fax: (65)6271-5155 Tel: (0755)3686-0880 Fax: (0755)3686-0816 Tel: (248)347-2607 Fax: (248)347-2602 Toshiba Electronics Service (Thailand) Co., Ltd. • Dalian Branch Toshiba América do Sul Ltda. Tel: (02)835-3491 Fax: (02)835-3490 Tel: (0411)8368-6882 Fax: (0411)8369-0822 Tel: (011)4083-7978 Toshiba Electronics Trading (Malaysia) Sdn. Bhd. • Xiamen Branch Toshiba India Private Ltd. • Kuala Lumpur Head Office Tel: (0592)226-1398 Fax: (0592)226-1399 • New Delhi Office Tel: (03)5631-6311 Fax: (03)5631-6307 • GuangZhou Office 32-Bit Microcontrollers Tel: (0124)499-6600 Fax: (0124)499-6611 • Penang Office Tel: (020)8732-2646 Fax: (020) 8732-2651 • Bangalore Office Tel: (04)226-8523 Fax: (04)226-8515 • Shenyang Office Tel: (080)251-90800 Toshiba Electronics Korea Corporation Tel: (024)3187-3325 Fax: (024)3187-3326 Toshiba Transmission and Tel: (02)3484-4334 Fax: (02)3484-4302 • Xi'an Office Distribution Systems (Vietnam) Ltd. Toshiba Electronic Components Taiwan Corporation Tel: (029)8720-3176 Fax: (029)8720-3565 Tel: (043)776-5950 Fax: (043)776-5956 Tel: (02)2508-9988 Fax: (02)2508-9999 • Wuhan Office Tel: (027)8555-7779 Fax: (027)8555-7842

RESTRICTIONS ON PRODUCT USE

Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”. Hardware, software and systems described in this document are collectively referred to as “Product”. TOSHIBA reserves the right to make changes to the information in this document and related Product without notice. This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative. Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations.

The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

Product may include products subject to foreign exchange and foreign trade control laws.

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.

2017 Website: https://toshiba.semicon-storage.com/ Previous edition: BCE0085G SEMICONDUCTOR & STORAGE PRODUCTS https:// toshiba.semicon-storage.com/