2013+ Scion FR-S/Toyota 86/Subaru BRZ Jackson Racing Supercharger System Installation Instructions Congratulations on your purchase of the Jackson Racing FR-S/86/BRZ Supercharger System! Jackson Racing supercharger systems are designed to be installed by a professional mechanic with a complete tool selection. If you have decided to complete the installation on your own, please be sure that you have the tools to handle the installation and ability to follow all instructions completely. Please review the complete instruction manual before starting your installation. Please follow the instruction manual step by step and do not skip ahead. Please refer to the Genuine Toyota or Subaru Service Manual for all mechanical and safety procedures. Make sure all vehicle updates and Technical Service Bulletins (TSBs) have been completed before installation. Many stock parts are reused/reinstalled during installation. Do not damage or discard any pieces during disassembly or installation. We recommend marking any hose or wire before disconnecting to avoid confusion during reassembly. Technical Support
[email protected] 909-927-8500 x2 1 Jackson Racing Supercharger Systems are designed to be installed on stock, factory engines. The Jackson Racing Factory Tuned ECU Calibration has been calibrated with the stock header and catalytic converters. If you have engine modifications, consult with a Jackson Racing representative about the possible variables this may cause. Jackson Racing supercharger systems require Premium grade (91 Octane or greater) gasoline, as does a stock FR-S/86/BRZ. Fuel quality is very important with a high performance application, so remember to only use a “Top Tier” gasoline.