Part No. 2321-0209 1. Kit Contents MEB8963 REVISION 0 BUSHING ASSEMBLY Trigger Lock Mounting Kit o p MS Fats / Slim s t Black

Aluminum parts are electrocoated (E-coated) q r for durability and weather resistance.

n Before assembly, read Warnings inside Ref Code Description Qty

WARNING n I8963B Mounting Instructions 1 o M1110EB Throttle side plate assembly 1 1. During installation, make sure that the windshield and M1109EB Clutch side plate assembly 1 hardware do not interfere with any cables or wiring p when the forks are turned all the way in either direction. q M1108EC Throttle side bracket assembly 1 Also make sure , through the full range of adjustment, r M1107EC Clutch side bracket assembly 1 that the windshield and hardware do not hit the gas M1122EC Throttle side upper bracket 1 tank. s 2. This is a detachable windshield, ALWAYS make sure t M1121EC Clutch side upper bracket 1 the locking mechanism is fully engaged after installing the windshield. 2. Mounting Instructions 3. The improper installation of this kit and related Additional tools required that are not included in this kit. components could result in serious injury or death. 7/16" or 11mm, 12mm, 8mm Wrench, or 1/4 socket and ratchet. 1.Cover gas tank and front fender with towels to avoid damage during installation. CAUTION 2. Install the two mounting plates onto the windshield, using the bottom and third bolt up. Leave the nylon washers off. 1. Memphis Shades windshields are made from Lucite® The small tab goes to the bottom, big one at the top. Tabs acrylic, and will last for years with proper care. Clean point out towards the edge of the windshield. (Fig. 1) your windshield with plenty of soapy water (mild dish- 3.On the throttle side, locate and loosen, almost to the point washing liquid is best) and a soft cotton cloth. Use your of removal, the two 8mm hex head bolts on top of the lower bare hands to feel and dislodge bugs, or cover with a triple tree that secures the chrome fork cover. Locate the wet, soapy towel and let it soak. Don’t use paper towels cable holder mounted under the upper triple tree. (Fig. 2) and scrape with anything. Small scratches can be re- Using a 12mm wrench, remove the cable holder bolt but hold moved with NOVUS #2. the cable holder in place while slipping the lower mounting bracket slots onto the 8mm Hex Head Bolts. Slip the upper 2. Never use any glass cleaning products, petroleum mounting bracket on to the cable holder so that the cable based chemicals, or cleaning agents with ammonia, holder is between the upper mounting bracket and the upper bleach or any other harsh chemicals. This includes (but triple tree, make sure that the cable holder's locator tab is not limited to) RainX, brake fluid, acetone, paint thinner, inserted in the locator hole. and loosely tighten, tighten this benzene and gasoline. “If it hurts your nose, it will hurt bolt after the windshield is in place. (Fig 2) the plastic.”

3. Glass cleansing agents will cause severe damage to Continued overleaf……. your windshield, and will void your warranty. For care and cleaning we recommend using Memphis Memphis Shades warrants all product components, metal Shades All Kleer, a unique cleaner/polish, bug and plastic, against defects in materials and workmanship remover and rain repellant that leaves a super slick for 24 months. surface that makes the next cleaning even easier. For Parts and Warranty Help, Contact: 4. At certain times of the day the Sunlight can reflect off Memphis Shades, Inc. the curvature of a windshield and cause extreme heat P.O. Box 429 build-up on motorcycle instruments and instrument Rossville, TN 38066 panel. Take care when parking. Park facing the sun, (901) 853 0293 place an opaque object over the instruments or adjust Visit us on the web at www.memphisshades.com or you the windshield to avoid reflections. can also reach us by email: [email protected] Part No. 2321-0209 Fig. 3

Trigger Lock Mounting Kit MS Fats / Slim Black 2. Mounting Instructions, continued 4. Push the lower bracket all the way towards the chrome fork covers and loosely tighten the two lower bolts. Tighten these bolts after the windshield is in place (Fig 2) 1 2 5. Repeat these steps for the Clutch side 3 4 6. Install the windshield by placing the lower slots into the lower mounting bushings. Slip the upper slots into the up- 1. Place lower slot into lower bushing. per mounting bushings and gently but firmly seat the slots 2. Rotate top slot into place. into place. Lock the locking mechanism into place. (Fig 3) 3. Secure locking Mechanism. 7. Tighten the upper and lower mounting bolts from steps 3 4. Loosen Allen Bolt to adjust angle, and 4 then re-tighten Allen Bolt. 8. Adjust the height, angle and alignment of the windshield and tighten ALL bolts. Note: This is a detachable windshield, ALWAYS make sure the Locking Mechanism is Fully Engaged after installing the windshield! (Fig 4) R322C/T LATCH Fig. 1 ASSEMBLY

Third Bolt CORRECT NOT CORRECT Fully engaged First Locking mechanism Bolt

Fig. 2

Cable Holder

MEM8963 08-