Processing Without Secrets 2017 Circular Saw Blades Irreplaceable in Home and Garden

SHORT PUBLICATION Processing without secrets 2017 Circular saw blades Irreplaceable in home and garden

DISC TEETH SYMMETRY OF BLADES The disc is made of the highest grade heat-treated They are decisive to state whether the quality of Uniformity and symmetry of saw set are extreme- tool steel. Laser cutting technique ensures high pre- the saw blade is good or not. Each tooth in our saw ly important for correct operation of saw blades. cision of the tool. Our discs are available also in ver- blades undergoes standard setting and sharpening Without correct symmetry, the tool deviates from sions with compensation grooves and special cut- procedure within the range of the specified param- line while lack of repeatability of saw set causes var- outs decreasing temperature impact on their rigidity. eters. Tooth setting should not exceed 1/3 - 2/3 of iable loading of the individual teeth and decreases their height depending on application of the given smoothness of cutting trace surface. This may cause line. Bigger set is used in saw blades used for rip- excessive heating of the disc and lead to its destruction. ping of soft and moist (green) wood, while lower set for cross cutting of hard and dry wood.

Circular saw blades, which may be used for various works, are necessary nearly in every home. They are particularly useful for cutting wood along or crosswise its rings. We may use these saw blades for processing of wood species, which are the most often used in Poland: fir, larch, pine, spruce, oak, beech, ash, hornbeam, maple, great maple and poplar. Ordinary circular saw blades are very popular tools used in stationary machines, table cut-off machines and pendulum saws. Having such a device, which is equipped with the highest-quality saw, we can freely cut wood depending on our needs and preferences. It is important to note that one of remarkable advantages of these tools is easy sharping of blades and the possibility to apply them more than once.

Ordinary circular saw blades Saw blades with sintered carbide HM

ORDINARY LA FOR RIPPING of solid timber WITH CHIP REMOVAL SYSTEM

ripping of soft and hard ripping and cross-cutting ripping of soft raw wood PT110 PS010 solid wood on table cut-off PS016 of soft and hard solid wood on circular saws machines on table cut-off machines

ORDINARY KB FOR CROSS-CUTTING of solid timber BRYTAN MAX SERIES

cross-cutting of soft and cross cutting of soft and cutting of soiled wood for PT150 hard raw wood PS210 hard solid wood on table PS685 building on circular saws on circular saws cut-off machines

ORDINARY WA WITH FEED LIMITER

ripping of soft raw wood ripping of firewood PT140 on double-blade PS015 on pendulum saws circular saws

Saw blades with sintered carbides PS190 Saw blades with sintered carbides Knives for planers PA410 for ripping of green wood on sin- for planing of surfaces of compo- for debarking of logs gle-shaft and twin-shaft multi-rip saws HM saw blades Band saw blades nents made of soft and hard wood MULTIX PRO Plus PIRANIA without knives

PS112 / PS122 PS195 PS900-0180-0006 PA310 NS110 HM saw blades HM saw blades HM saw blades for Band saw blades Knives for planers MULTIX PRO MULTIX PRO Slowrun raw wood debarking ORKA NCV 1 Standard (two-knife/ (four-knife) four-knife)

PS113 / PS123 / PS133 Saw blades with sintered carbides Band saws Gang saws NS120 HM saw blades for cutting of raw wood, including for cutting of all types or raw wood on for preliminary cutting of wood on sin- Knives for planers MULTIX PRO Plus frozen wood, on band frame horizontal and vertical frame gle-disc or twin-disc cut off machines EXTRA CHROM (two-knife/four-knife/ sawing machines sawing machines six-knife)

check the other tools for wood processing PS124 / PS134 PS050 PA510 PR110 NS135

HM saw blades HM saw blades Band saw blades Gang saws, including Knives for planers MULTIX PRO Twin with teeth grouping BARAKUDA chrome coated or HSS STANDARD (four-knife/six-knife) GM WA stellited saw blades

2 Saw blades for power tools Professional Cutting Warranty

LASER CUTTING PROCESS CONTROL OF PARAMETERS OF SOLDERING OF KNIVES HM SHARPENING OF KNIVES HM How to make it? A special arm RUN-OUT AND FLATNESS FOR Soldering of sintered carbides is Sintered carbides are sharpened introduces a metal sheet into the THE SAW BLADE DISC executed on fully automated sol- in a modern, fully automated line Cu Ra<0,16 processing chamber using the roll- Produced discs undergo tensioning Ag dering units. First the carbides are of highly-efficient production er table. A precise laser beam cuts process. Rollers pressing force and segregated and set into a soldering grinders with numerically-con- out the exact shape of the saw tensioning radii are selected for position in vibrating drums. Then trolled axes serviced by an arm blade disc, which is very important the given batch and diameter of silver solder is cut and bend to the of a robot. Grinders are provid- during the subsequent stages of the saw blade. Checking of run-out shape of the socket for carbide. ed with an integrated housing tool production. The whole pro- and flatness of discs is monitored Soldering temperature measure- for wet operation, which ensures cess is controlled by a computer guiding laser accord- on an ongoing basis by a specially designed device. ment is carried out using a laser sensor and an au- very efficient cooling during sharpening. They are ing to the previously prepared programme. It scans bodies surface with a laser sensor and pro- tomatic machine ensures additional tempering of a also equipped with measurement systems ensuring vides information about measurement results on an soldered tooth. automatic selection and correction of sharpening ongoing basis, which are displayed, among others, in parameters which are dependent on required ster- form of a three-dimensional model of a tested disc. eometry of HM knife toothing.

What influences the quality of cutting executed by saws in power tools? First and foremost - it depends on the quality of saw blades. Even the most professional saw will not cut material in a satisfying way if it is equipped with a low-quality disc. For high rotational speeds the discs should have proper rigidity, ensure stable operation and durability, which is dependent on the type and quality of sintered carbide (HM) used and correctly tensioned disc. The last feature of the tool is strongly related to the quality of sharpening made on carbide and stereometry of the tip. Globus discs are manufactured from the best materials on computer-controlled sharpeners (CNC) and so-called deviations from nominal dimensions (tolerances) do not exceed hundredths of a millimetre. Correct work of the tool depends also on correct selection of the type and line of the saw blade which shall correspond to the type of material being cut, its dimensions and the type of cutting and cutting technique. Our wide range of tools includes many discs in all sizes, intended for cutting of the specific types of materials. HM saw blades with sintered carbides for table saw machines

GS10 TYPE KOLIBER HM saw blades with sintered Saw blades with sintered carbides for plunge saws carbides for mitre saws

PS670 cutting of hard solid wood ZAG1 CHIPBOARD MITER CRS1 GA-5

cutting of hard wood- SET2 cutting of laminates and PS662 based materials - MDF, wood-based materials PS601 HDF and conglomerates

PS673 cutting of soft solid wood ZAG2 WOOD MITER CRS2 GS-5

a versatile disc for cutting GB15 TYPE BRYTAN cutting of hard wood, PS664 PS602 of wood and wood-based including exotic wood materials - precise cutting

PS675 cutting of wood for construction with nails ZAG3 SPECIAL MITER CRS3 3GS5

quick cutting of wood and 1GS5 TYPE OSA PS666 cutting of composite PS603 wood-based materials materials with the ideal quality of processed surfaces

cutting of composite PS680 and cellular panels ZAG4 STANDARD saws for power tools

LL CUT ELECTRO PS668 ripping and cross cutting

cutting of furniture panels PS320 and wood-based materials hm saw blades with sintered carbides for plunge saws

www.globus-wapienica.com 3 Saws for furniture industry Cutting has never been more precise

PERFECTLY BALANCED LONGER LIFETIME DEDICATED SOLUTIONS Our tools do not cause cracks during cutting. It is the VERY HARD sintered carbide type ULTRAFINE Custom-designed geometry of teeth made of sin- possible due to a precisely executed and balanced with hardness over 2100 HV in LL line CUT and tered carbide allows optimal selection of a tool for disc and refined tolerances of saw blades during the NANOGRAIN with hardness over 2250 HV in LL the specified cutting operation for the given- mate production process. CUT VH line ensures even longer satisfaction with rials and obtaining the best edge after processing. effects of saw blade operation between successive sharpenings.

Furniture companies and woodworking plants need the highest-quality machinery and tools. Saw blades LL CUT line will meet the expectations of the most demanding users. Thanks to the new design of the disc, silencing grooves, changes in tensioning processes and dynamic balancing our saw blades distinguish with even bigger rigidity, stability and precision of operation. New sharpening geometry of LL CUT line extended the range of applications for these tools and decreased cutting resistance. These lines are made based on the VERY HARD sintered carbides within the range of hardness from 2100 to 2250 HV. Thanks to the introduced changes users get very long lifetime of saw blades and an ideal edge of processed materials. Using a new line of saw blades you should remember about correct maintenance. It is a very important part of the operation process. The saw blades can be used much longer thanks to correct sharpening or repair. New LL CUT lines should be sharpened on computer-controlled machines (CNC) using intensive cooling system due to high hardness of carbide knives.

HM saw blades with sintered carbides in LL CUT line

LL CUT line GA LL CUT line GS CONICAL SCORING LL CUT VH line

pre-cutting of the layer cutting of wood-based ma- of veneer, laminate, varnish cutting of veneered wood- terials such as: chipboard, PS627 etc. in slabs made of wood- based panels and plywood laminate, MDF based materials (MDF, HDF, LDF, OSB) PS310-0300-0002 PS320-0300-0001

LL CUT VH line GA LL CUT VH line 3GS SEGMENTAL SCORING LL CUT line

cutting of wood-based ma- pre-cutting of the layer terials such as: chipboard, cutting of natural veneers, of veneer, laminate, varnish laminate, MDF and HDF veneers in packs and strips, PS646 etc. in slabs made of wood- with a low degree frames made of wood and based materials of contamination wood-based materials (MDF, HDF, LDF, OSB) of the materials PS312-0300-0003 PS322-0300-0003

LL CUT speedline GA LL CUT VH line GA15

high-performance cutting of furniture strips (number packet cutting of wood- of meters cut / number of PS312 based materials on panel sharpenings) with the high sizing machines quality of edges being cut PS312-0300-0017

Tools with polycrystalline DI300 DI410 Knives for planers Cutter head fixed of HM saw blades diamond DIA for levelling and planing for disintegration of surplus material for profiling and sizing Circular saws DIA Sizing heads DIA of wood-based materials on industrial lines of wood-based materials

DI010 - DI130 DI310 / DI311 DI120 / DI600 NS130 PS590

Conical scoring saw Router bits DIA Profile tools DIA Knives for planers HSS Cutter head fixed blades DIA PREMIUM of HM saw blades

check the other tools for DI315 NS140 processing of wood-based materials Segmental scoring saw Knives for planers HM blades DIA

4 Router bits for top spindle milling machines and CNC House renovation can be fun

SINTERED CARBIDE PRECISE GRINDING OF KNIFE OPEN BODIES PROFILES High-quality sintered carbide increases durability Sintered carbides gain extraordinary sharpness The open body of the cutter improves the quality of and lifetime of the tool. It ensures also a better qual- during the sharpening process on automated CNC the processed surface. It allows using higher feeds, ity of the processed surface and it is not necessary sharpeners. Therefore, the knives not only loose decreases cutting resistance and facilitates chips to provide additional grinding. their roughness, but they gain also extraordinary removal thanks to the use of larger spaces between smoothness, which has an impact on an increase the teeth. of tool lifetime and evidences the high quality of the sintered carbide used.

The human being, using unlimited imagination, is able to design any type of surface. It is possible to execute grooves, channels, holes, roundings, bevels and many other shapes and patterns on processed surfaces after milling of wood or various wood-based materials. But the highest-quality tools are indispensable for this purpose. This is exactly what the new generation of router bits in CNC PREMIUM line offers. It is intended not only for popular top spindle milling machines but also for automated CNC machining centres. The new line of cutters is distinguished from the other tools available in this product group by: sintered carbide used, precise grinding of knife made of sintered carbine and open bodies profiles. Simultaneous use of three components in the design of CNC PREMIUM cutters has positive impact on characteristics of tool operation and considerably improved the quality of milled surfaces.

Router bits for top spindle milling machines and CNC

CNC PREMIUM WITH SOLDERED HM KNIVES WITH INSERT HM KNIVES

milling, grooving of wood and wood-based straight milling, grooving hobbing, option to drill FT902 materials on top spindle FT502 of solid wood on top FT401 in wood-based milling machines and spindle milling machines materials and wood CNC processing units

profile milling, rounding hobbing and milling on of wood and wood-based drilling in solid wood templates with option FT904 materials on top spindle FT503 on top spindle FT405 to drill in wood-based milling machines and CNC milling machines materials and wood machining centres

profile milling, profiling beveling of edges of doors made of wood and profiled milling of solid at an angle of 30 FT913 wood-based materials on FT508 wood on top spindle FT406 degrees of wood-based top spindle milling machines milling machines materials and wood and CNC machining centres

CL011-CL121 / CL530- Solid-carbide router bits Router bits VHM LS501 - LS504 Profile heads CL580

for milling, drilling in wood of wood and wood-based materials for engraving in wood, wood-based materi- for profiling of soft, hard wood check the other tools for profiling and wood-based materials als and plastics Drills with knife HM Arbor / profile cutters and wood-based materials with knives HSS

LS010 / LS070 / LS220 LS100 - LS108 Arbor profile cutters CL600 - CL610 LJ010 - LJ180

for profiling of hard wood Finishing solid-carbide Cutters HSS for glue Cutterheads with insert Router bits VHM cutters and wood-based materials joints / mini-dovetails HM and HSS knives

LS040 / LS060 Drill bits with knife HM CL010 - CL340

for drilling in wood Roughing solid-carbide Arbor / profile cutters cutters and wood-based materials with knives HM

www.globus-wapienica.com 5 Saw blades for manufacturers of door and window joinery With masterful precision

DEDICATED SOLUTIONS PERFECTLY BALANCED LONGER LIFETIME Custom designed geometry of teeth with the correct This is a great benefit of our tools. It is possible due The use of special sintered carbides ensures even type of carbides is very important. It allows selecting to the precisely executed and balanced disc and longer satisfaction with the effects of saw blades tools for cutting of the given workpiece and ensure lowered tolerances of saw blades during the pro- operation between successive sharpenings. duction process. obtaining the best surface after processing.

We manufacture new lines of saw blades ALUEX for the most demanding users operating in metal and door and window joinery industry used both inside and outside the buildings. Lines of these tools distinguish with even bigger rigidity, stability and cutting precision due to the new design of the disc and the dynamic balancing process. Introduced changes mean extra benefits to users. These benefits include very high durability of new saw blades with an ideal edge of processed materials. High smoothness of sintered carbides is obtained during the sharpening process using a special grinding wheel and its operation parameters. It prolongs work time of the tool between successive sharpenings. Users of saw blades from new lines should remember about a very important issue connected with their operation - that is sharpening and repairs on a regular basis. Thanks to proper maintenance, our tools can be used much longer.

Saw blades with sintered carbides in ALUEX line

ALUEX GA-5 line SUPER ALUEX line SAW BLADES HM

cutting of aluminium cutting of sections and sections and plastic solid profiles made of for bevelling of glass stop PS415 PS460 PS900 profiles with wall hardmachineable made of Al and PVC thickness max. 3mm aluminium alloys

ALUEX GA+5 line ALUEX line

cutting of aluminium milling/removal of burrs sections and plastic PS415 PS495 from external corners in profiles with wall windows made of PVC thickness max. 5mm

Saw blades with sintered carbides Oscillating saw blades HSSE circular saw blades PG020 FP110 / FP120 for cutting of sections made of soft con- Ordinary segmental for key copying structional steel using hand saws for multifunctional power tools circular saws HSS circular saw blades and Aw 5 PS682 FP152 FP615 PG100 FP130 / FP140 Segmental circular saws HM saw blades in Round and half-round HSSE circular saw acc. to DIN STEEL-TECH Electro HSS circular saw blades oscillating saw blades blades for keys HSS B and Bw 15 for cutting of sections made of soft con- Friction saw blades FP152 structional steel using mitre saws for cutting pipes, rods and sections during HSS triple chip circular saw blades Circular saw blades HSS-DMo5 production of steel structures on fast-rotat- Wide and narrow ing cut off machines PS810 oscillating saw blades for cutting off solid materials and sections for plunge grooving on cut off machines for metal HM saw blades PM010 STEEL-TECH FP500 FP220 Friction saw blades HSS triple chip circular for cutting of steel and non-ferrous metals HSS circular saw blades saw blades for cut off machines Band saw blades

PS830 for cutting of majority of material grades, HSSE circular saw blades Metal circular saw blades HSS-DMo5 Segmental saw blades starting from aluminium to stainless steels HM saw blades for cutting of metals on orbital cut off for high-efficient cutting off steel and on band saws COOL CUT for cutting steel spacer bars machines non-ferrous metal products PX100-110-200

Band saw blades HSS circular saw blades FP145 FP600 PG010 PROF-CUT (PX100), for cutting and grooving of metals,

check the other tools for processing of metals, aluminium and plastics HSS circular saw PROF-CUT PLUS (PX110) constructional steels, grey cast iron and Metal circular saw Segmental circular saws blades HSS-E (M35) blades for cutting steel with disc ports UNI-CUT (PX2000) medium-hard non-ferrous metal spacer bars for metal cutting

6 Hacksaw blades Cutting has never been easier

MILLING OF TOOTHING HARDENING TOOTH WAVING TEST RUNS Durable and fine teeth are a very Hacksaw blades undergo moni- Tooth profiling process is called To ensure high quality and repeat- important component of hacksaw tored induction hardening pro- also waving. This process ensures ability of our products each lot of blades. They ensure simple, precise cess. It ensures correct hardness proper depth and length of waves hacksaw blades undergo tests and convenient cutting. Use of teeth and flexibility of toothing what ensuring smooth cutting and during the final production stage. milled with special hobs enables to prevents cracking of teeth during protection against sticking in pro- We eliminate products not con- achieve proper and optimally select- cutting. cessed material during cutting. forming the quality requirements ed teeth geometry. during these tests.

Almost everyone has used hacksaw blades at least once in a lifetime... This is for sure one of the most popular tools used in almost every home and workshop. Their popularity results from the simplicity of use and the standard parameters of these products allow using them in the majority of hand frames available on the market. Hacksaw blades are used for cutting off and straight cutting of wide range of materials, including: wood, wood-based materials, sections made of plastics, profiles or strips. They may be also used to cut components made of steel and non-ferrous metals. GLOBUS hacksaw blades distinguish with high quality and durability thanks to the use of high-quality German tool steels during production.

Hand hacksaw blades

“CARBON STEEL” - type RAMa “CARBON STEEL” - type RAMd

narrow, single-sided wide, two-sided

cutting of ferro-alloys, BP800 BP100 cutting of ferro-alloys, BP115 non-ferrous metals, plastics colour metals and plastics and wood

“CARBON STEEL” - type RAMb HSS - type RAMb FRAME FOR HAND SAW BLADE

wide, two-sided wide, two-sided for metal: 300 mm

cutting of ferro-alloys, BP105 BP210 hand cutting of various cutting of ferro-alloys, non-ferrous metals and materials colour metals and plastics hard-machineable steels

“CARBON STEEL” - type RAMc bi-metal FLEXER - type RAMa

narrow, two-sided narrow, single-sided

BP110 cutting of ferro-alloys, BP300 cutting of ferro-alloys, non-ferrous metals and non-ferrous metals and plastics plastics

Power hacksaw blades HSS-DMo5 Power hacksaw blades HSS-DMo5

for cutting of rods and profiles for metal, wood and PVC processing made of ferro-alloys, non-ferrous metals for cutting metals using power tools

on frame sawing machines check other hacksaw blades

BM100 BM600 BM700

Power hacksaw blades Long blades - fret Long blades - NPMd-P /HSS/ saw /HSS/ /HSS/

www.globus-wapienica.com 7 Diamond discs Highest quality renovation

VERSATILE RANGE OF APPLICATIONS DIAMOND GRAIN AND GROUND MASS Diamond saws GLOBUS have a correspondingly se- Automatic uncovering of diamond grain during GRAIN CONCENTRATION lected shape of the rim depending on the type of cut cutting is possible due to its properly selected size High and optimum concentration of diamond grain material: with a segmental track, a continuous track and optimal chemical composition and hardness of (for cm3 of the rim) ensures long lifetime of the tool and a continuous track with incisions. It allows using ground mass. Such a solution ensures correct oper- and high efficiency of cutting. our saw blades for dry and wet cutting on bench cut ation of the tools. off machines.

Do you plan renovation in a house or flat? You should equip yourself with correct tools allowing efficient and precise implementation of the project. For sure, diamond rim saw blades will be very useful. Such saw blades are commonly used tools for all renovation, assembly or finishing works. They may be used almost at every stage of construction projects. They are used by experts and DIYers in Poland and worldwide. Standard types of diameters allowing the use of saw blades in almost all cut-off machines and bench cut-off machines available on the market are their undisputed advantage. Further advantages include quick replacement of discs in the machine, ease and simplicity of use. Diamond discs GLOBUS are manufactured from the highest quality materials sourced from selected suppliers. It applies especially to diamond grain and half-products used. We use state-of-the-art laser technologies during production. Whole process is monitored and finished components undergo inspection on an ongoing basis. All this enables us to provide the highest quality products in comparison to these available on the market.

Diamond discs for angle grinders

BET-TECH CER-TECH GRES-TECH

cutting of wall ceramic tiles, ideal for cutting of hard ideal saw blades for cutting PO110 PO130 glazed tiling and glazed PO150 materials such as: fully vitri- of reinforced concrete floor tiles fied tiles, granite, marble

CUT-TECH SPEED-TECH GAL-TECH, GAL-TECH CR

cutting of cobblesett and for cutting of ceramic, for cutting of: epoxy plastics, PO111 concrete, facing bricks and PO121 marble, fully vitrified tiles PO175 glass fibre, laminates, building ceramics and building ceramics polycarbonate etc.

Diamond saw blades Diamond saw blades Diamond saw blades

for cutting of old concrete for cutting of fresh concrete for cutting of concrete, asphalt on mobile cut off machines on mobile cut off machines on mobile cut off machines

PD110 PD115 PD190

Diamond saw blades Diamond saw blades Diamond saw blades DI-TECH Plus OLD DI-TECH Plus FRESH DI-TECH Plus ASPHALT CONCRETE CONCRETE check the other tools for processing of construction materials

8 Drill bits for wall structures, concrete and stone Indispensable for every redecoration

VERSATILITY It is a real treat. Users of our drill SINTERED CARBIDE SPIRAL BODY bits - without the necessity to re- The tip of the drill bit is made of The correctly designed shape of Made of heat treated steel using place them - will be able to drill the appropriate type of sintered the spiral ensures efficient re- appropriate alloy ensures stable holes in various types of construc- carbide and at an optimum angle moval of surplus material allowing working and great strength. tion materials such as concrete, of 130°. quick execution of holes. cellular concrete, brick, ceramic building materials, ceramic tiles etc.

It is hard to image renovation or construction works without hammer drill bits. This is a very popular tool intended for making holes in concrete, brick, stones and the other materials using hammer drills and percussion drills. Professional hammer drill bits should ensure high efficiency of drilling and durability. Hammer drill bits will fulfil their role if the user will select them properly for the given material and type of renovation and the drilling process will be carried out correctly. Please note that drilling method depends on technical parameters, that is structure, physical and mechanical features of the given material. For example concrete, granite or marble have granular and compact structure, they are very hard and therefore, very hard to process. In such a case, processing shall be carried out by crushing or grinding with a proper tool distinguishing with the highest hardness, e.g. with a drill bit with high-quality sintered carbide.

Drill bits for wall structures, concrete and stone Tools SDS+

WITH CYLINDRICAL SHANK DRILLS WITH SDS+ SHANK CHISELS WITH SDS+ SHANK

type KWPn for drilling of hollow as well for hammering out and as deep and through holes for drilling wall structures crushing of construction WB010 WB050 - ideal for drilling in wall ND030 and concrete - execution materials such as: concrete, structures, concrete of hollow holes (e.g. for brick, natural stone etc. assembly pins) and natural stone

SET WITH CYLINDRICAL SHANK SETS OF SDS+ DRILL BITS POINT CHISEL WITH SDS+ SHANK

type KWPn for hammering out and for drilling in wall for drilling wall structures crushing of construction KW050 structures, concrete NG010 and concrete - execution materials such as: concrete, and natural stone of hollow holes (e.g. for brick, natural stone etc.

KW030, KW070 assembly pins)

WITH CYLINDRICAL SHANK SDS+ SHANK GROOVER

type KWPs for hammering out and WB040 for drilling in wall structures NB010 crushing of construction and concrete - execution of materials such as: concrete, deep and through holes brick, natural stone etc.

Hand saws processing of construction materials for cutting of cellular concrete check the other tools for

N4100

Hand saw blades with sintered carbide

www.globus-wapienica.com 9 GO Cleaner - a fluid for cleaning and washing of tools and machinery Quick and efficient

NEW FORMULA VERSATILITY WORKING SPEED The cleaner is produced on the ba- GO Cleaner is ideal for cleaning 15 minutes is enough to remove ONE FLUID, TWO TASKS sis of alkaline compounds contain- of dirt on machining tools during heavy oil-derivative and resin con- GO Cleaner is a two-task fluid. First ing surfactants and is a highly mois- wood processing, especially green- taminations. How to make it? Very - it separates dirt from the surface turizing, penetrating and removing wood, because it quickly removes simple. GO Cleaner should be being cleaned. Second - it protects yn do mycia i czyszczenia na rz zi oraz maszy n dirt. It is also safe for the cleaned a resin. It is suitable for cleaning sprayed directly on the cleaned

DBA O TWÓJ WARSZTAT PRAC Y cleaned surface against external

500ml

zabrudzenia ropopochodne. surface, i.e. plastics, aluminum and of gardening tools such as i.e. grass surface and left for 5-15 minutes factors. rubber gaskets. trimmers and mowers, chainsaws to dissolve any dirt. After that time and power saws. It is possible to clean soiled compo- please wipe the surface with a cloth nents of machinery and give a flash to window panels to remove the dirt. in fireplaces which are covered with soot.

New formula of the fluid was prepared for heavy dirt usually encountered in wood, woodworking, furniture and machinery industry. GO Cleaner was developed by Polish chemists and is produced in one of the Polish chemical plants. The Go Cleaner fluid is ideal for taking care about the cleanness of equipment. Cleanness is very important not only for aesthetic reasons. Please note that each tool, without a special refining coating, which is intended for cutting of wood (especially greenwood) or plastics (PVC, rubber, gaskets) is endangered with sticking of blades, the disc the body and the teeth. Accumulations of dirt in such locations causes an increase of cutting resistance, which may result in excessive overheating of the disc and loss of stability of the tool and even in its destruction. Because Go Cleaner may be safely neutralized with water, it is safe for work clothes and does not affect the fiber structure. GO Cleaner, as one of the few on the market, is not a combustible substance and is not subject to the requirements of ADR, which significantly reduces transport costs.

GO Cleaner fluid

GO Cleaner - a fluid for cleaning and washing of tools and machinery TO100-0000-0500 TO100-0000-0500 TO100-0005-0000 TO100-0010-0000 TO100-0020-0000

Reduction rings Insert knives and blades Accessories for tools DIA LJ800 - LJ805

System knives Tersa, KX400 LJ555 LJ550 Centrolock, Variplan, DI990 Terminus, Bulldozer, Centrofix Reduction rings for Insert knives HM for Mounting brackets Clamps for CNC grips circular saws cutters and profiling for heads cutterheads Accessories for router bits

CL900 LJ520 LJ600-LJ610 FT470 DI990

Flanged reducer Insert knives HSS - Insert knives HM for Clamping screws for Grips for CNC sleeves for cutters and straight for straight and panel cutters router bits cutterheads profiling cutterheads

Grinding wheels for sharpening CL901,910 LJ520 LJ630 FT480

OP201 Flanged reducer sleeves Profiled insert knives Serrated back knives Hex key for router bits / twisted for cutters and HSS for cutterheads HSS for cutterheads - cutterheads LJ010 and LJ020 for profiling check other accessories for tools Borazon grinding wheels - for band saws sharpening

CL920 LJ521 LJ150 FT490

Distance pieces for re- Feed limiter HSS for Mounting brackets for Ball bearings for ducer sleeves for cutters straight cutterheads planing cutterheads router bits and cutterheads

10 Special tools Wide-range portfolio of products

GLOBUS brand is known for many years of experience and knowledge within the scope of processing of various types of materials. Modern lines and technologies used during production processes allow us to provide our customers with completely new top quality tools with more applications. Such products include, for example, cutters for oil, automotive, aircraft or yacht industry. We offer also knives for papermaking industry, saw blades and disc knives for the meat processing and food industry, knives for the tobacco and textile industry, saw blades with sintered carbides for cutting of acrylic and the other, highly-specialised tools manufactured on request for industrial processing of different materials.

Circular knives Circular saws

WITH KNIVES HM WITH KNIVES HM WITH KNIVES HM

of WOOL-TECH series of WOOL-TECH series KX for cutting half carcass PS910 PS710 for rock mineral wool for rock mineral wool in the meat industry

FOR PAPER CUTTING WITH KNIVES HM ORDINARY BLADES

KY for cutting of gypsum for cutting of paper cores PS390 boards on PT300 for meat cutting production lines

CIRCULAR KNIVES HSS WITH KNIVES HM Drill bits KZ for cutting of rubber reinforced hoses, rubber gas- PS690 for cutting of acrylic MACHINE DRILL BITS kets, tobacco industry etc. with knives HM

LS550 for drilling blind holes in wooden window and door Metal circular saw blades Profile cutters profiles

HSS-DMo5 FOR WINDOWS DRILL BITS HSS

FP for milling of window CL LS580 for drilling of holes for for the oil industry and doors profiles handles in PVC profiles

HSS-DMo5 Knives for chippers FP for processing of metal

components, e.g. used tools for special applications during the production of Knives for reelers Router bits musical instruments FLAT KNIVES CUTTERS HSS

for processing of window for crushing of wooden LJ700 LS300 profiles made of PVC, components, branches aluminium and steel

www.globus-wapienica.com 11 Fabryka Pił i Narzędzi WAPIENICA Sp. z o.o. T. Regera 30 st. 43-382, Bielsko-Biała, Poland tel. +48 33 82 80 800 fax +48 33 48 80 521 [email protected]