DOCSLIB.ORG

Commingle Recycling Instructions and Guidelines

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Commingle Recycling Instructions and Guidelines YES! These items are currently recyclable in our system! These items are currently recyclable in our system! YES!YES! THESE ITEMS ARE CURRENTLY RECYCLABLE IN OUR SYSTEM Steel (Tin) Cans Cardboard Milk Jugs Clear Plastic Drink &Steel Aluminum (Tin) Cans Cans EggCardboard Cartons Milk Jugs Clear PlasticBottles Drink & Aluminum Cans Egg Cartons Bottles IN YOUR GLASS BIN Direct Mail, 2ƯFH3DSHU Corrugated Cardboard IN YOUR GLASS BIN Directmagazines, Mail, &2ƯFH3DSHU Newspaper, Glass Bottles Corrugated& Chipboard Cardboard magazines,& catalogs Including& Newspaper, Ad Inserts Glass& BottlesJars & Chipboard & catalogs Including Ad Inserts & Jars in your GLASS bin in your GLASS bin Not sure what bin to put an item in? Check with your hauler for more info. Not sure whatNot sure bin what to bin put to put an an itemitem in? in? Check For with more your hauler info for visit more HeyApex.com info. WHEN IN DOUBT, THROW IT OUT. WHENWHEN IN DOUBT, THROW IT OUT. No, these items are not currently recyclable in our system. No, these items are not currently recyclable in our system. NO! THESE ITEMS ARE NOT CURRENTLY RECYCLABLE IN OUR SYSTEM As of April 9th, 2018, plastic tubs are no longer accepted in our recycling stream. As of April 9th, 2018, plastic tubs are no longer accepted in our recycling stream. As of April 9, 2018, plastic tubs are no longer accepted in our recycling stream. More info: laneapex.com Lane Apex Disposal (541) 607-2042 More info: laneapex.com Lane Apex Disposal (541) 607-2042 WHY SHOULD I RECYCLE? You know the four R’s (Reduce, Reuse, Repair, and Recycle) – now let’s talk about the three E’s: Energy, Economy, and Environment. Recycling saves energy because the manufacturer doesn't have to produce something new from raw natural resources. When energy consumption goes down, production costs go down. Savings are passed on to the consumer, and when recycled products are purchased, a demand for more recycled goods is promoted. This improves the economy. Waste has a huge negative impact on the natural environment, including the land, air, and water. Recycling reduces the need for more landfills, where harmful 541-607-2042 chemicals and greenhouse gasses are released into the air and land. OR VISIT HEYAPEX.COM By recycling, you are actively improving the planet’s overall health by helping keep the air, water and land clean. GENERAL GUIDELINES FOR CO-MINGLED RECYCLING (541) 607-2042 / HEYAPEX.COM ALL RECYCLABLES MUST BE EMPTY AND THOROUGHLY CLEANED. PLACE RECYCLING LOOSE IN CART, NOT IN PLASTIC BAGS. YES NO PAPER PAPER NO Paper coffee cups or lids NO Pizza boxes & other food soiled papers and cardboard Mixed waste paper NO Milk cartons & juice boxes Magazines & catalogs NO Shredded paper or gift wrap Newspaper (including glossy ads) NO Tissue paper, toilet paper, paper towels & napkins NO Waxed or plastic-coated paper & cardboard Telephone books NO Paper cups or plates Junk mail (envelopes with NO Ice cream cartons or frozen juice containers plastic windows are accepted) NO Frozen food boxes Cardboard NO Pet food bags METALS Cereal & other dry food boxes NO Scrap metals or engine parts (remove waxed liner) NO Foil juice pouches or foil-looking food bags Paper bags & sacks PLASTICS NO Tubs, yogurt cups or jars NO Plastic bags of any kind NO Takeout containers of any kind PLEASE DO NOT FLATTEN NO Lids or caps from plastic bottles & tubs THE FOLLOWING ITEMS NO Microwave cookware NO Meat, bakery, vegetable trays & lids NO Cups or plates or utensils METALS NO Prescription pill containers Aluminum Cans • Soda cans • Tin cans NO Aseptic Packaging (soy/nut milk containers, juice boxes) Aluminum foil (must be clean, in large ball) STYROFOAM PRODUCTS NO Styrofoam cups & fast food containers PLASTICS NO Packing peanuts & blocks HOUSEHOLD ITEMS Plastic Milk jugs ONLY NO Plate, window & mirror glass Clear Plastic Drink bottles ONLY NO Light bulbs (such as water, soda bottles ONLY) NO Ceramic plates & cups NO Dishes & china NO Wire & clothes hangers NO Batteries NO Garbage NO CONTAINERS THAT HELD TOXIC MATERIALS (Any container with a WARNING or CAUTION label) GLASS RECYCLING BIN NO Automotive product containers (gas, oil, antifreeze, etc.) NO Garden products (such as fertilizers or pesticides) Bottles (such as soda, beer, wine, etc.) NO Aerosol cans Jars (such as pickles) NO Cleaning product containers NO Paint or stain containers LOCALLY OWNED & OPERATED SINCE 1979.
Load more

Recommended publications
  • Cardboard and Brown Paper Bags Office Paper, Newspaper, Junk Mail, Magazines, and Catalogs
    Recycling Center 801 Diamond Valley Drive Open: Daily to the public during daylight hours This guide will help you properly prepare your recyclable materials for drop-off at the Town of Windsor Recycle Center. This is a drop-off facility. It does not have a buy-back option and is for use by residents and small businesses. Following this information will help maintain the facility and the recycling program for the benefit of the community. IMPORTANT… • Do not leave your recyclables in plastic bags. Plastic bags are NOT recyclable! • The plastic item must be a BOTTLE or JAR. with a #1 or #2 on the bottom. • 99 percent of these will have a screw-on plastic lid (which isn’t recyclable). • Plastic containers with a #3 - #7 on the bottom are NOT acceptable. • Tubs, buckets, deli plates, microwave/fast food trays, wrappers, Styrofoam, toys, patio furniture, etc. are NOT acceptable. • Plastic bottles larger than 2.5 gallons are NOT acceptable. • Syringes and other medical supplies are NOT acceptable. Cardboard and Brown Paper Bags Corrugated cardboard is easy to recognize. It is made of paper and has an arched layer called “fluting” between smooth sheets called “liners”. The drop-off site has two 40-yard hydraulic compactor units for collecting corrugated cardboard and brown paper bags. The compaction system is self-activated by depositing the prepared materials into a six-inch tall slot. Flatten boxes. Cut or tear large boxes into sections no larger than 4 feet by 4 feet to prevent jamming the machine. No wet, waxed-coated or food-contaminated boxes.
    [Show full text]
  • FAQ About Recycling Cartons
    FREQUENTLY ASKED QUESTIONS ABOUT CARTONS WHAT IS A CARTON? » Cartons are a type of packaging for food and beverage products you can purchase at the store. They are easy to recognize and are available in two types—shelf-stable and refrigerated. Shelf-stable cartons (types of products) Refrigerated (types of products) » Juice » Milk » Milk » Juice » Soy Milk » Cream » Soup and broth » Egg substitutes » Wine You will find these You will find these products in the chilled products on the shelves sections of grocery stores. in grocery stores. WHAT ARE CARTONS MADE FROM? » Cartons are mainly made from paper in the form of paperboard, as well as thin layers of polyethylene (plastic) and/or aluminum. Shelf-stable cartons contain on average 74% paper, 22% polyethylene and 4% aluminum. Refrigerated cartons contain about 80% paper and 20% polyethylene. ARE CARTONS RECYCLABLE? » Yes! Cartons are recyclable. In fact, the paper fiber contained in cartons is extremely valuable and useful to make new products. WHERE CAN I RECYCLE CARTONS? » To learn if your community accepts cartons for recycling, please visit RecycleCartons.com or check with your local recycling program. HOW DO I RECYCLE CARTONS? » Simply place the cartons in your recycle bin. If your recycling program collects materials as “single- stream,” you may place your cartons in your bin with all the other recyclables. If your recycling program collects materials as “dual-stream” (paper items together and plastic, metal and glass together), please place cartons with your plastic, metal and glass containers. WAIT, YOU JUST SAID CARTONS ARE MADE MAINLY FROM PAPER. Don’t I WANT TO PUT THEM WITH OTHER PAPER RECYCLABLES? » Good question.
    [Show full text]
  • What Notto Recycle Curbside
    NEWSPAPERS • Newspaper Newspapers must be bundled and tied • Inserts that come w/newspapers, such with string or twine. Shredded paper as comics, glossy coupons, must be in clear or labeled plastic bags. TV/magazine sections & colored food/store ads GLASS BOTTLES, ALL PLASTIC BOTTLES • Glass bottles (all colors) #1 - #7 Examples: Water, soda, milk, & CONTAINERS (#1 - #7 ), STEEL, • Glass jars (all colors) juice, soap, detergent, bleach, BIMETAL & ALUMINUM CANS These • Steel cans shampoo and cleaning-agent bottles. items should be rinsed thoroughly and • Bimetal cans You may also include peanut butter, placed inside your recycling bucket. Only • Aluminum cans yogurt and diaper-wipe containers, margarine tubs, plastic trays and the items listed at right are acceptable. • All plastic bottles and clear plastic clamshell containers Crush all plastic bottles to save space. containers #1 - #7 from restaurant salad bars. Remove caps. NO STYROFOAM® OTHER PAPER/JUNK MAIL • Magazines • Catalogs Other paper should be placed in a brown • Writing/school paper • Phone books paper bag or cardboard box and placed • All envelopes • Store fliers w/mailing labels next to your blue bucket. • Copy paper • Office paper • Paperback books • Non-metallic gift wrap • Hardcover books • Greeting cards w/hard covers removed CORRUGATED CARDBOARD, • Corrugated cardboard • Tissue boxes CHIPBOARD & PIZZA BOXES • Pizza boxes (clean!) • Paper towel rolls Corrugated cardboard must be cut into • Brown bags 2 ft. x 2 ft. squares and tied with string or • Chipboard boxes including: twine. Please include pizza boxes & cereal, cookie, pasta, cake, cracker, chipboard with corrugated cardboard. detergent (remove plastic liners), Place tied bundle (pizza boxes, chipboard gift, shoe, shirt and any retail & cardboard) next to your recycling boxes.
    [Show full text]
  • Different Perspectives for Assigning Weights to Determinants of Health
    COUNTY HEALTH RANKINGS WORKING PAPER DIFFERENT PERSPECTIVES FOR ASSIGNING WEIGHTS TO DETERMINANTS OF HEALTH Bridget C. Booske Jessica K. Athens David A. Kindig Hyojun Park Patrick L. Remington FEBRUARY 2010 Table of Contents Summary .............................................................................................................................................................. 1 Historical Perspective ........................................................................................................................................ 2 Review of the Literature ................................................................................................................................... 4 Weighting Schemes Used by Other Rankings ............................................................................................... 5 Analytic Approach ............................................................................................................................................. 6 Pragmatic Approach .......................................................................................................................................... 8 References ........................................................................................................................................................... 9 Appendix 1: Weighting in Other Rankings .................................................................................................. 11 Appendix 2: Analysis of 2010 County Health Rankings Dataset ............................................................
    [Show full text]
  • Corrugated Board Structure: a Review M.C
    ISSN: 2395-3594 IJAET International Journal of Application of Engineering and Technology Vol-2 No.-3 Corrugated Board Structure: A Review M.C. Kaushal1, V.K.Sirohiya2 and R.K.Rathore3 1 2 Assistant Prof. Mechanical Engineering Department, Gwalior Institute of Information Technology,Gwalior, Assistant Prof. Mechanical Engineering 3 Departments, Gwalior Engineering College, Gwalior, M. Tech students Maharanapratap College of Technology, Gwalior, [email protected] [email protected] [email protected] ABSTRACT Corrugated board is widely used in the packing industry. The main advantages are lightness, recyclability and low cost. This makes the material the best choice to produce containers devoted to the shipping of goods. Furthermore examples of structure design based on corrugated boards can be found in different fields. Structural analysis of paperboard components is a crucial topic in the design of containers. It is required to investigate their strength properties because they have to protect the goods contained from lateral crushing and compression loads due to stacking. However in this paper complete and detailed information are presented. Keywords: - corrugated boards, recyclability, compression loads. Smaller flutes offer printability advantages as well as I. INTRODUCTION structural advantages for retail packaging. Corrugated board is essentially a paper sandwich consisting of corrugated medium layered between inside II. HISTORY and outside linerboard. On the production side, corrugated In 1856 the first known corrugated material was patented is a sub-category of the paperboard industry, which is a for sweatband lining in top hats. During the following four sub-category of the paper industry, which is a sub-category decades other forms of corrugated material were used as of the forest products industry.
    [Show full text]
  • Tyvek Graphics Technical Data Sheet
    DuPont ™ Tyvek ® for Graphics DURABLE – ECO-FRIENDLY – RECYCLABLE Available in sheets or rolls; usable for nearly all print technolo gies DuPont Tyvek a is a tough, durable, eco-friendly and 100% recyclable material available in sheets and rolls for all print technologies. DuPont Tyvek ® products are used for long-lasting signs, banners, flags, displays, visual merchandising, map and book printing, packaging, credit card sleeves, envelopes, shopping bags, wallets, wall coverings, drapery, and promotional apparel. Tyvek ® is also gaining use as a template material for signs because it is lightweight, durable, and is unaffected by moisture. Conventional laser printing is not recommended on Tyvek ® because of the temperatures involved in the printing units. For the same reason, Tyvek ® should not be used in electrostatic copiers. PRODUCT TYPE OF PRINTING USED FOR COATED MILS OZ. [GSM] CORE NOTES IDEAL USES STOCK WIDTHS Black Tyvek Flexography, Gravure, Offset Uncoated 5 mil 1.25 oz 2” Paper-like. Banners & Signs 36", 45" Lithography, Screen Process, UV-cure [42 gsm] Hard Structure Custom sizes available Inkjet (w/ testing due to lighter weight) Available in 10-yard rolls 1085D Digital on Demand, Flexography, Uncoated 10.3 mil 3.2 oz 3” Paper-like. Banners & Signs. Extra body 48.25", 57.125", 114.25" Gravure, Offset Lithography, Screen [109 gsm] Hard Structure for shape development. Custom sizes available Process, UV-cure Inkjet Available in 10-yard rolls 1079 Digital on Demand, Flexography, Uncoated 7.9 mil 2.85 oz 3” Paper-like. Tags & Labels 48" Gravure, Offset Lithography, Screen [97 gsm] Hard Structure Custom sizes available Process, Thermal Transfer, UV-cure Available in 10-yard rolls Inkjet 1073D Digital on Demand, Flexography, Uncoated 7.5 mil 2.2 oz 3” Paper-like.
    [Show full text]
  • Articles of Paper Pulp, of Paper Or of Paperboard
    Chapter 48 Paper and paperboard; articles of paper pulp, of paper or of paperboard Notes. 1.- For the purposes of this Chapter, except where the context otherwise requires, a reference to “paper” includes references to paperboard (irrespective of thickness or weight per m²). 2.- This Chapter does not cover : (a) Articles of Chapter 30; (b) Stamping foils of heading 32.12; (c) Perfumed papers or papers impregnated or coated with cosmetics (Chapter 33); (d) Paper or cellulose wadding impregnated, coated or covered with soap or detergent (heading 34.01), or with polishes, creams or similar preparations (heading 34.05); (e) Sensitised paper or paperboard of headings 37.01 to 37.04; (f) Paper impregnated with diagnostic or laboratory reagents (heading 38.22); (g) Paper-reinforced stratified sheeting of plastics, or one layer of paper or paperboard coated or covered with a layer of plastics, the latter constituting more than half the total thickness, or articles of such materials, other than wall coverings of heading 48.14 (Chapter 39); (h) Articles of heading 42.02 (for example, travel goods); (ij) Articles of Chapter 46 (manufactures of plaiting material); (k) Paper yarn or textile articles of paper yarn (Section XI); (l) Articles of Chapter 64 or Chapter 65; (m) Abrasive paper or paperboard (heading 68.05) or paper- or paperboard-backed mica (heading 68.14) (paper and paperboard coated with mica powder are, however, to be classified in this Chapter); (n) Metal foil backed with paper or paperboard (generally Section XIV or XV); (o) Articles of heading 92.09; (p) Articles of Chapter 95 (for example, toys, games, sports requisites); or (q) Articles of Chapter 96 (for example, buttons, sanitary towels (pads) and tampons, napkins (diapers) and napkin liners for babies).
    [Show full text]
  • Label Liners: Meeting the Sustainability Challenge
    Label liners: meeting the sustainability challenge By Mariya Nedelcheva, Product Manager Film & With ever-greater emphasis placed on packaging and waste reduction, Jenny Wassenaar, Compliance & Sustainability brand owners are looking for solutions that secure their sustainability Director, Avery Dennison credentials. Consumers pay particularly close attention to packaging, where there are significant environmental gains to be made. For example, waste from labelling can create useful by-products and circular economies. Waste is not always visible on the final packaging, but its impact on brand reputation is no less real. Consumers’ perceptions of a brand can be enhanced when sustainability is improved. label.averydennison.com Matrix Liner Final White paper waste waste label 16% 35% 37% Start-up waste plus Challenge printed End-user The challenge of recycling waste from the labelling process in error scrap - and ideally creating useful by-products - is complex. Many 10% 1% different elements must be addressed in order to move towards the ultimate goal of zero waste. For example, the word ‘recyclable’ can mean many things, and should not be viewed in isolation. Today there is a chance that recyclable products will still end up in landfill, so what matters is establishing genuinely viable end-to-end recycling solutions. That means considering every component within packaging, including where it comes from, how much material has been used, and what happens at every stage of the package’s journey through the value chain. This paper discusses how the sustainability of labelling laminates can be improved, with a particular focus on the label release liners that are left behind once labels have been dispensed.
    [Show full text]
  • Improved Oil Resistance of Cellulose Packaging Paper By
    1 Improved Oil Resistance of Cellulose Packaging Paper by 2 Coating with Natural Polymer Derived Materials 3 Feijie Wang1, Liqiang Wang1,*, Xinchang Zhang1, Shufeng Ma2 4 1 Jiangsu Provincial Key Laboratory of Food Advanced Manufacturing Equipment 5 Technology, School of Mechanical Engineering, Jiangnan University, Wuxi, 214122, 6 China 7 2 School of Food Engineering, Jiangnan University, Wuxi, 214122, China 8 *Email: [email protected] 9 10 Abstract: Paper is widely used as food packaging due to its good mechanical strength 11 and degradability. However, it has a relatively strong affinity for water and oil, which 12 limits its application scope. In this work, we prepare two types of coated paper to 13 investigate, the influence the air permeability and polarity on the oil resistance of the 14 coated paper. The results showed that reducing the air permeability improved the grease 15 resistance of the coated paper. High surface energy coatings also showed better oil 16 resistance because of their higher content of polar components that resulted in a higher 17 resistance to grease. The mechanical properties of the paper also improved after 18 applying the coating. These natural derived materials offer an alternative to the fluoride- 19 containing materials currently used in the market to improve the wettability of paper. 20 Keywords: coated paper · oil resistance · air permeability · polarity 21 Introduction 22 As the variety of foods containing grease is abundant, the types of oil-resistant 23 materials used in food packaging has diversified in recent years. Environmental 24 protection and safety issues continue to be important, and as a result, scholars have paid 25 increasing attention to paper packaging materials (Coltelli et al.
    [Show full text]
  • U.S. Postal Service Mail Addressing Guidelines
    U.S. Postal Service Mail Addressing Guidelines Address Placement Placement of the address on the face of an envelope should conform to the following U. S. Postal Service specifications. • The address should be in an area, one inch from each side of the envelope. • The top of the address should be no more than 2 3/4 inches from the bottom of the envelope and the bottom no more than 5/8's of an inch from the bottom of the envelope. • The area 4 1/2 inches by 5/8 's of an inch in the lower right hand corner of the envelope MUST remain empty for bar code placement for any maul that is processed by the Mail Center. Enclosures Correspondence Mail of any kind for transport by the U. S. Postal Service must be enclosed in an appropriate envelope or parcel and sealed. The type of enclosures determine the mailing classification. Non-mailables Several items are listed by the U. S. Postal Service as non-mailable in envelopes: • paper clips • metal pieces • glass, chips • sand. These can jam or damage the mailing machines and can cause serious injury to Mail Center and Postal employees. The following are also classified as non-mailables and subject to return to sender: envelopes and cards less than 3 1/2 inches in height or 5 inches in length. It is recommended that when mailing questionable items to U. S. or foreign destinations, the mailer should contact the Mail Center for assistance. All foreign countries also impose various restrictions. Brochures, letters and newsletters being mailed without an envelope must be folded consistently and must be tabbed with the recommended number of tabs.
    [Show full text]
  • The HP Molded Fiber Advanced Tooling Solution White Paper | the HP Molded Fiber Advanced Tooling Solution
    White paper The HP Molded Fiber Advanced Tooling Solution White paper | The HP Molded Fiber Advanced Tooling Solution Macrotrends driving the packaging market The packaging market is transitioning from foam/plastic to molded fiber (also known as molded pulp) packaging for sustainability reasons, with environmental packaging (i.e., replacing foam with paper) favoring the growth of this segment. The molded fiber packaging market is a worldwide industry, valued at $8 billion, and is the fastest-growing segment in the packaging market, with growth being fueled by growing consumer demand for sustainable and environmentally friendly packaging solutions, as well as the increase in take-out food and e-commerce.1 Asia-Pacific countries (APAC) are the biggest geographical market, especially China, Hong Kong, and Taiwan. The region is experiencing the highest growth and is expected to be the largest market by 2024. This growth can be attributed to the rising importance of disposable packaging,2 as well as the lower cost of tooling production in these areas, which presents a significant price advantage over other regions. The primary segments currently are food and beverage and electronics, which are estimated to have the highest growth. The increasing use of molded pulp products for the packaging of various electronic products (including mobile phones and accessories, computers, printers, modems, trimmers, and projectors, among others) due to its convenience, improved sustainability, and low cost are some of the factors contributing to the growth of this segment.2 Molded fiber manufacturing The thermoformed tooling segment is expected to outgrow other segments, propelled by increased consumer demand for high-quality molded fiber packaging and ongoing innovation driving down thermoforming-packaging manufacturing costs.
    [Show full text]
  • Dupont™ Tyvek® Water-Resistive Barriers Installation Guidelines
    DuPont™ Tyvek® Water-Resistive Barriers Installation Guidelines HELPING YOU GET THE JOB DONE RIGHT VERSION 2 Table of Contents Applicable Products ..................................................................................................................................................................2 Recommended Materials .........................................................................................................................................................2 Code Requirements ..................................................................................................................................................................3 General Instructions .................................................................................................................................................................3 Special Considerations .............................................................................................................................................................3 Installation Instructions .............................................................................................................................................................4 Continuity Terminations ........................................................................................................................................................................6 Gable Ends ...........................................................................................................................................................................6
    [Show full text]