DOCSLIB.ORG

METALORGANIC PRECURSORS All Sales Are Subject to EMD’S Complete Terms and Conditions of Sale

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
METALORGANIC PRECURSORS All Sales Are Subject to EMD’S Complete Terms and Conditions of Sale Products are warranted to meet the specifications set forth on their label/packaging and/or certificate of analysis at the time of shipment or for the expressly stated duration. EMD provides information and advice on application technologies and relevant regulations based upon its current knowledge and opinion. EMD MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE REGARDING OUR PRODUCTS, THEIR APPLICATION OR ANY INFORMATION PROVIDED IN CONNECTION THEREWITH. EMD shall not in any event be liable for incidental, consequential, indirect, exemplary or special damages of any kind resulting from any use or failure of the products. Customer is responsible for and must independently determine the suitability of EMD´s products for its products, intended use and processes. The foregoing information and suggestions are also provided without warranty of non-infringement as to intellectual property rights of third parties and shall not be construed as any inducement to infringe the rights of third parties. Customer shall be responsible for obtaining any applicable third party intellectual property licenses. METALORGANIC PRECURSORS All sales are subject to EMD’s complete Terms and Conditions of Sale. Prices are subject to change without notice. EMD reserves the right to discontinue products without prior notice. EMD, EMD Performance Materials and the vibrant M are trademarks of Merck KGaA, Darmstadt, Germany. All other trademarks pertain to their proprietors. We provide Germany Taiwan Merck KGaA Merck Display Technologies Ltd. Quality Frankfurter Straße 250 No. 39, Ching Chien 1 Road 64293 Darmstadt Kuan Yin Industrial Park Phone: +49 6151 72 0 Taoyuan, 32853 A subsidiary of Merck KGaA, Japan Darmstadt, Germany Merck Ltd. Phone: +886 3 483 6521 ARCO Tower, 5F. Fax: +886 3 483 6528 8-1, Shimomeguro 1-chome Meguro-ku China Tokyo 153-8927 Merck Ltd. A subsidiary of Merck KGaA, Block 14 (East Side) Darmstadt, Germany No. 211 Qinqiao Road China (Shanghai) EMD Performance Materials is a business of Phone: +81 3 5434 4700 Free Trade Zone Shanghai, PRC Merck KGaA, Darmstadt, Germany A subsidiary of Merck KGaA, Korea Darmstadt, Germany Merck Performance Materials Ltd. Tel.: +86 21 2083 2200 5th Floor Haesung-2 Building Fax: +86 21 2083 5010 Teheran-Ro 508 Gangnam-Gu Malaysia Seoul 135-725 Merck Sdn. Bhd. A subsidiary of Merck KGaA, Level 3, Menara Sunway Annexe Darmstadt, Germany Jalan Lagoon Timur Phone: +82 2 2185 3800 Bandar Sunway 46150 Petaling Jaya The United States Selangor EMD Performance Materials Corp. A subsidiary of Merck KGaA, One International Plaza, Suite 300 Darmstadt, Germany Philadelphia, PA 19113 Phone: +603 7494 3686 Phone: +1 484 652 5659 Fax: +1 484 652 5668 [email protected] 04/2017 Deposition metalorganic materials sources FOR THIN FILM TECHNOLOGIES EMD Performance Materials provides high-purity materials and solutions based on our nearly Element Product Abbreviation Chemical Formula 350-year-old history within the chemical industry. With our worldwide supply chain we are able to provide the right materials on the right scale for our customers and partners. By the acquisition and Aluminum Trimethylaluminum TMA Al(CH ) integration of SAFC Hitech, our metal organic product line covers alkyls of aluminum, gallium and 3 3 Triethylaluminum TEA Al(C H ) indium, as well as alkoxides, amides and dikentonates of various metal-based dopands frequently 2 5 3 used in the semiconductor industry. Antimony Trimethylantimony TMSB Sb(CH3)3 Tris (dimethylamino)antimony AMSB Sb[N(CH3)2]3 Bismuth Trimethylbismuth TMBI C3H9Bi Boron Triethylboron TEB (C2H5)3B Cadmium Dimethylcadmium DMCD Cd(CH3)2 High batch-to- Carbon Carbontetrabromide CBR4 CBr4 batch uniformity Gallium Trimethylgallium TMG Ga(CH ) for improved yield 3 3 Triethylgallium TEG Ga(C2H5)3 Indium Trimethylindium TMI In(CH3)3 Solution Trimethylindium TMIS In(C2H5)3 Magnesium Bis(cyclopentadienyl)magnesium CPMG Mg(C5H5)2 Nitrogen Dimethylhydrazine DMHZ (CH3)2N∙NH2 Methylhydrazine HZM CH3NHNH2 Tertiarybutylhydrazine TBHZ C4H12N2 Phosphorous Tertiarybutylphosphine TBPH P(C H )H Customized 4 9 2 purity for Selenium Diisopropylselenide DIPSE Se(C3H7)2 different semiconductor Tellurium Diethyltelluride DETE Te(CH2CH3)2 needs Diisopropyltelluride DIPTE Te(C3H7)2 Zinc Dimethylzinc DMZ Zn(CH3)2 Your global supplier Diethylzinc DEZ Zn(C2H5)2 for precursors in Dimethylzinc:Triethylamine ZNAM Zn(CH3)2∙N(C2H5)3 lighting, photovoltaic, optoelectronic and IC industry.
Load more

Recommended publications
  • Comparison of Trimethylgallium and Triethylgallium As “Ga” Source
    Comparison of trimethylgallium and triethylgallium as “Ga” source materials for the growth of ultrathin GaN films on Si (100) substrates via hollow-cathode plasma- assisted atomic layer deposition Mustafa AlevliAli Haider, Seda Kizir, Shahid A. Leghari, and Necmi Biyikli Citation: Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 34, 01A137 (2016); doi: 10.1116/1.4937725 View online: http://dx.doi.org/10.1116/1.4937725 View Table of Contents: http://avs.scitation.org/toc/jva/34/1 Published by the American Vacuum Society Articles you may be interested in Substrate temperature influence on the properties of GaN thin films grown by hollow-cathode plasma-assisted atomic layer deposition Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 34, 01A12501A125 (2015); 10.1116/1.4936230 Atomic layer deposition of GaN at low temperatures Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 30, 01A12401A124 (2011); 10.1116/1.3664102 Low-temperature self-limiting atomic layer deposition of wurtzite InN on Si(100) Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 6, 045203045203 (2016); 10.1063/1.4946786 Kinetics of thermal decomposition of triethylgallium, trimethylgallium, and trimethylindium adsorbed on GaAs(100) Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 9, (1998); 10.1116/1.577146 Substrate impact on the low-temperature growth of GaN thin films by plasma-assisted atomic layer deposition Journal of Vacuum Science & Technology A: Vacuum, Surfaces,
    [Show full text]
  • Catalytic Asymmetric Addition of Diorganozinc Reagents to N
    Catalytic asymmetric addition of diorganozinc SPECIAL FEATURE reagents to N-phosphinoylalkylimines Alexandre Coˆ te´ , Alessandro A. Boezio, and Andre´ B. Charette* Department of Chemistry, University of Montreal, P.O. Box 6128, Station Downtown, Montreal, QC, Canada H3C 3J7 Edited by Jack Halpern, University of Chicago, Chicago, IL, and approved February 4, 2004 (received for review October 31, 2003) The synthesis of ␣-chiral amines bearing two alkyl groups has been hampered by the accessibility and stability of the alkylimine precursor. Herein, we report an efficient strategy to generate the alkyl-substituted imine in situ that is compatible with the Me- DuPHOS monoxide⅐Cu(I) catalyzed addition of diorganozinc re- agents. The sulfinic acid adduct of the imine is readily prepared by mixing diphenylphosphinic amide, the aldehyde, and sulfinic acid. The sulfinic acid adduct is generally isolated by filtration. The addition of diorganozinc reagents in the presence of Me-DuPHOS monoxide⅐Cu(I) and the in situ-generated imines affords the cor- Fig. 1. Bioactive ␣-chiral amines. responding ␣-chiral amines in high yields and enantiomeric excesses. sensitive imines from stable precursors has been a strategy that he synthesis of ␣-chiral amines using the catalytic asymmetric has been quite successful in a number of cases. Typically, a stable Taddition of diorganozinc reagents has produced very exciting imine adduct is used as a precursor and is converted to the imine results in recent years (1–3). This very important subunit is in situ (Scheme 2). The method involves the use of a leaving ␣ CHEMISTRY commonly found in many pharmaceuticals and other biologically group (LG) on the -carbon of the N-protected amine.
    [Show full text]
  • Pyrophoric Materials
    Appendix A PYROPHORIC MATERIALS Pyrophoric materials react with air, or with moisture in air. Typical reactions which occur are oxidation and hydrolysis, and the heat generated by the reactions may ignite the chemical. In some cases, these reactions liberate flammable gases which makes ignition a certainty and explosion a real possibility. Examples of pyrophoric materials are shown below. (List may not be complete) (a) Pyrophoric alkyl metals and derivatives Groups Dodecacarbonyltetracobalt Silver sulphide Dialkytzincs Dodecacarbonyltriiron Sodium disulphide Diplumbanes Hexacarbonylchromium Sodium polysulphide Trialkylaluminiums Hexacarbonylmolybdenum Sodium sulphide Trialkylbismuths Hexacarbonyltungsten Tin (II) sulphide Nonacarbonyldiiron Tin (IV) sulphide Compounds Octacarbonyldicobalt Titanium (IV) sulphide Bis-dimethylstibinyl oxide Pentacarbonyliron Uranium (IV) sulphide Bis(dimethylthallium) acetylide Tetracarbonylnickel Butyllithium (e) Pyrophoric alkyl non-metals Diethylberyllium (c) Pyrophoric metals (finely divided state) Bis-(dibutylborino) acetylene Bis-dimethylarsinyl oxide Diethylcadmium Caesium Rubidium Bis-dimethylarsinyl sulphide Diethylmagnesium Calcium Sodium Bis-trimethylsilyl oxide Diethylzinc Cerium Tantalum Dibutyl-3-methyl-3-buten-1-Yniborane Diisopropylberyllium Chromium Thorium Diethoxydimethylsilane Dimethylberyllium Cobalt Titanium Diethylmethylphosphine Dimethylbismuth chloride Hafnium Uranium Ethyldimthylphosphine Dimethylcadmium Iridium Zirconium Tetraethyldiarsine Dimethylmagnesium Iron Tetramethyldiarsine
    [Show full text]
  • Chemical List
    1 EXHIBIT 1 2 CHEMICAL CLASSIFICATION LIST 3 4 1. Pyrophoric Chemicals 5 1.1. Aluminum alkyls: R3Al, R2AlCl, RAlCl2 6 Examples: Et3Al, Et2AlCl, EtAlCl2, Me3Al, Diethylethoxyaluminium 7 1.2. Grignard Reagents: RMgX (R=alkyl, aryl, vinyl X=halogen) 8 1.3. Lithium Reagents: RLi (R = alkyls, aryls, vinyls) 9 Examples: Butyllithium, Isobutyllithium, sec-Butyllithium, tert-Butyllithium, 10 Ethyllithium, Isopropyllithium, Methyllithium, (Trimethylsilyl)methyllithium, 11 Phenyllithium, 2-Thienyllithium, Vinyllithium, Lithium acetylide ethylenediamine 12 complex, Lithium (trimethylsilyl)acetylide, Lithium phenylacetylide 13 1.4. Zinc Alkyl Reagents: RZnX, R2Zn 14 Examples: Et2Zn 15 1.5. Metal carbonyls: Lithium carbonyl, Nickel tetracarbonyl, Dicobalt octacarbonyl 16 1.6. Metal powders (finely divided): Bismuth, Calcium, Cobalt, Hafnium, Iron, 17 Magnesium, Titanium, Uranium, Zinc, Zirconium 18 1.7. Low Valent Metals: Titanium dichloride 19 1.8. Metal hydrides: Potassium Hydride, Sodium hydride, Lithium Aluminum Hydride, 20 Diethylaluminium hydride, Diisobutylaluminum hydride 21 1.9. Nonmetal hydrides: Arsine, Boranes, Diethylarsine, diethylphosphine, Germane, 22 Phosphine, phenylphosphine, Silane, Methanetellurol (CH3TeH) 23 1.10. Non-metal alkyls: R3B, R3P, R3As; Tributylphosphine, Dichloro(methyl)silane 24 1.11. Used hydrogenation catalysts: Raney nickel, Palladium, Platinum 25 1.12. Activated Copper fuel cell catalysts, e.g. Cu/ZnO/Al2O3 26 1.13. Finely Divided Sulfides: Iron Sulfides (FeS, FeS2, Fe3S4), and Potassium Sulfide 27 (K2S) 28 REFERRAL
    [Show full text]
  • Title Exploration of Dimethylzinc-Mediated Radical Reactions
    Title Exploration of Dimethylzinc-Mediated Radical Reactions. Author(s) Yamada, Ken-Ichi; Tomioka, Kiyoshi Citation The Chemical Record (2015), 15(5): 854-871 Issue Date 2015-10 URL http://hdl.handle.net/2433/203021 This is the peer reviewed version of the following article: Yamada, K.-i. and Tomioka, K. (2015), Exploration of Dimethylzinc-Mediated Radical Reactions. Chem. Rec., 15: 854‒871, which has been published in final form at http://dx.doi.org/10.1002/tcr.201500017. This article may be used for non-commercial purposes in accordance with Wiley Right Terms and Conditions for Self-Archiving.; The full-text file will be made open to the public on 17 JUL 2016 in accordance with publisher's 'Terms and Conditions for Self-Archiving'.; This is not the published version. Please cite only the published version.; この論文は出版社版でありません。引用の際に は出版社版をご確認ご利用ください。 Type Journal Article Textversion author Kyoto University PersonalPersonal AccountAccount THE CHEMICAL Exploration of Dimethylzinc- RECORD Mediated Radical Reactions THE CHEMICAL RECORD Ken-ichi Yamada,[a] and Kiyoshi Tomioka[b] [a] Graduate School of Pharmaceutical Sciences, Kyoto University E-mail: [email protected] [b] Department of Medicinal Chemistry, Faculty of Pharmaceutical Sciences, Doshisha Women's College of Liberal Arts E-mail: [email protected] Received: [will be filled in by the editorial staff] Published online: [will be filled in by the editorial staff] ABSTRACT: In this account, our studies on radical reactions that are promoted by dimethylzinc and air are described. Advantages of this reagent and differences from conventional radical initiators, such as triethylborane, are discussed. Keywords: radical reaction, dimethylzinc, C(sp3)–H bond functionalization, C–C bond formation, Umpolung Introduction It has been long time since the word "radical" changed its useful functional group transformations via a radical meaning in chemistry.
    [Show full text]
  • Gallium in 2017 (PDF)
    2017 Minerals Yearbook GALLIUM [ADVANCE RELEASE] U.S. Department of the Interior April 2020 U.S. Geological Survey Gallium By Brian W. Jaskula Domestic survey data and tables were prepared by Wanda G. Wooten, statistical assistant. Low-grade primary gallium was recovered globally as a gallium production was 5% from 2007 through 2017. World byproduct of processing bauxite and zinc ores. No domestic high-grade secondary refined gallium production increased at a low-grade primary gallium was recovered in 2017. Imports CAGR of 7%. World gallium consumption, which increased at of gallium metal and gallium arsenide (GaAs) wafers plus a CAGR of 6% from 2007 through 2017, was estimated to have domestically refined and recycled gallium continued to account been 355 t in 2017. for all U.S. gallium consumption (metal and gallium in GaAs). Metal imports were 93% higher than those in 2016 (table 1). Production The leading sources of imported gallium metal were, in No domestic production of low-grade primary gallium was descending order, China (including Hong Kong), the United reported in 2017. Neo Performance Materials Inc. (Canada) Kingdom, France, Ukraine, Russia, and the Republic of Korea recovered gallium from new scrap materials, predominantly (table 4). A significant portion of imports was thought to be those generated during the production of GaAs ingots and low-grade gallium that was refined in the United States and wafers. Neo’s facility in Blanding, UT, had the capability to shipped to other countries. Data on refined gallium exports, produce about 50 metric tons per year of high-grade gallium. however, were not available.
    [Show full text]
  • Studies on Group Ii Metal Alkyls Particularly Those of Beryllium
    Durham E-Theses Studies on group ii metal alkyls particularly those of beryllium Robert, P.D. How to cite: Robert, P.D. (1968) Studies on group ii metal alkyls particularly those of beryllium, Durham theses, Durham University. Available at Durham E-Theses Online: http://etheses.dur.ac.uk/8717/ Use policy The full-text may be used and/or reproduced, and given to third parties in any format or medium, without prior permission or charge, for personal research or study, educational, or not-for-prot purposes provided that: • a full bibliographic reference is made to the original source • a link is made to the metadata record in Durham E-Theses • the full-text is not changed in any way The full-text must not be sold in any format or medium without the formal permission of the copyright holders. Please consult the full Durham E-Theses policy for further details. Academic Support Oce, Durham University, University Oce, Old Elvet, Durham DH1 3HP e-mail: [email protected] Tel: +44 0191 334 6107 http://etheses.dur.ac.uk STUDIES ON GROUP II METAL ALKYLS PARTICULARLY THOSE OF BERYLLIUM by P.D. ROBERTS, B.Sc. A thesis submitted for the Degree of Doctor of Philosophy in the University of Durham JULY 1968 Acknowledgements The author wishes to thank Professor G.E. Coates, M.A. , D.Sc, F.R.I.C., under whose supervision this research was carried out, for his constant encouragement and valuable advice. Thanks are also given to Dr. A.J. Downs, formerly of the University of Newcastle upon Tyne, for his help with vibrational spectroscopy and to members of this department, especially Dr.
    [Show full text]
  • Adduct Purification of Trimethylgallium Using 4-Dimethylaminopyridine
    International Journal of Advanced Science and Technology Vol. 41, April, 2012 Adduct Purification of Trimethylgallium using 4-Dimethylaminopyridine Selvakumar Dhanasingh1*, Rajendra Singh2 and Mohammed Nasim3 1Defence BioEngineering and Electromedical laboratory, C. V. Raman Nagar, Bangalore – 560 093, India 2Directorate of ER & IPR, DRDO Bhawan, Rajaji Marg, New Delhi – 110105, India 3Defence Materials & Stores Research and Development Establishment, DMSRDE P.O., G.T. Road, Kanpur – 208 013, India [email protected] Abstract 1:1 and 2:1 adducts of trimethylgallium (TMGa) with 4-dimethylaminopyridine (DMAP) were synthesized and characterized by 1H, 13C NMR, FAB-MS and Trace elemental analyses using ICP-MS. Both adducts are non-pyrophoric, thermally dissociable and easy to handle. FAB-MS study suggests that the adducts are associated in tetrameric forms. TMGa of purity more than 99.999% (5N) was released from these adducts, which shows the adducts are potential candidates to produce high pure metal alkyl sources for Metal-Organic Chemical Vapor Deposition (MOCVD). Keywords: Trimethylgallium, pyrophoric, MOCVD precursor, adduct purification technique 1. Introduction The electronic properties of II-VI and III-V compound semiconducting thin films deposited by MOCVD method are mainly determined by the purity of the precursors [1, 2]. As most of the metal alkyls for MOCVD are volatile and highly reactive pyrophoric liquids, the physical purification methods such as, fractional distillation and low temperature crystallization are difficult to employ and often large amount of metal alkyls need to be discarded to obtain them with high purity. However, these metal alkyls can be purified by ‘adduct purification technique’, which involves the formation of adducts between the metal alkyl with an appropriate Lewis base, which are easy to handle and can be purified by re- crystallization [3, 4, 5].
    [Show full text]
  • Zno and Zncdo Metal Organic Vapor Phase Epitaxy: Epitaxy, Defects and Band Gap Engineering
    ZnO and ZnCdO metal organic vapor phase epitaxy: epitaxy, defects and band gap engineering By Vishnukanthan Venkatachalapathy Submitted in partial fulfillment of the requirements for the degree of Philosophiae Doctor Department of Physics/Centre for Materials science and Nanotechnology Faculty of Mathematics and Natural Sciences University of Oslo Dedicated to my father Abstract Zinc oxide (ZnO) and its ternary alloys have high potential to compete with III-V nitrides for optoelectronic applications. Furthermore, oxide semiconductors receive considerable attention due to their low cost of fabrication, chemical robustness and high thermal conductance. The goal of this work was (i) to explore manufacturing route of ZnO and ZnCdO films using metal organic vapor phase epitaxy (MOVPE) in vector flow epitaxy mode and (ii) to master structural/optical properties of these films for preparing such as components in electronics, optoelectronics and solar energy conversion. Our starting point was to study the influence of basic synthesis parameters on the structural and luminescence properties of pure ZnO films on c-axis oriented sapphire substrates. The samples were synthesized using previously unexplored for ZnO vector flow epitaxy mode of MOVPE employing systematic variations of fundamental synthesis parameters such as temperature, pressure, II/VI molar ratio, total carrier gas flow ratio, susceptor rotation rate, etc. It was concluded that the growth temperature affects the precursor pyrolysis and in these terms pre-determines the actual II/VI molar ratio available at the reaction zone. Concurrently, direct II/VI molar ratio variations by supplying different amount of precursors influences the properties too, for example, changing intrinsic defect balance in the films.
    [Show full text]
  • Gallium Arsenide
    GaAs GaInN Most efficient solar cells Most efficient white light GaN ITO Transparent conducting oxide Light emitting diodes blue 1907 The first light emitting diode (LED) made of SiC Gallium nitride (GaN) Aluminium gallium arsenide (AlGaAs) Henry Joseph Round Silicon carbide Gallium phosphide Indium gallium nitride etc To the Editors of Electrical World: SIRS: – During an investigation of the unsymmetrical passage of current through a contact of carborundum and other substances a curious phenomenon was noted. On applying a potential of 10 volts between two points on a crystal of carborundum, the crystal gave out a yellowish light. Only one or two specimens could be found which gave a bright glow on such a low voltage, but with 110 volts a large number could be found to glow. In some crystals only edges gave the light and others gave instead of a yellow light green, orange or blue. In all cases tested the glow appears to come from the negative pole, a bright blue-green spark appearing at the positive pole. In a single crystal, if contact is made near the center with the negative pole, and the positive pole is put in contact at any other place, only one section of the crystal will glow and that same section wherever the positive pole is placed. There seems to be some connection between the above effect and the e.m.f. produced by a junction of carborundum and another conductor when heated by a direct or alternating current; but the connection may be only secondary as an obvious explanation of the e.m.f.
    [Show full text]
  • ALD Grown Zinc Oxide with Controllable Electrical Properties
    ALD grown Zinc Oxide with controllable electrical properties E. Guziewicz 1, M. Godlewski 1,2 , L. Wachnicki 1, T.A. Krajewski 1, G. Luka 1, S. Gieraltowska 1, R. Jakiela 1, A. Stonert 3, W. Lisowski 4, M. Krawczyk 4, J.W. Sobczak 4, A. Jablonski 4 1Institute of Physics, Polish Academy of Science, Al. Lotników 32/46, 02-668 Warsaw, Poland 2 Dept. Mathematics and Natural Sciences, College of Sciences UKSW, ul. Dewajtis 5, 01-815 Warsaw, Poland 3The Andrzej Soltan Institute for Nuclear Studies, ul. Ho ża 69, 00-681 Warsaw, Poland 4 Institute of Physical Chemistry, PAS, ul. Kasprzaka 44/52, 01-224 Warsaw, Poland Abstract. The paper presents results for zinc oxide films grown at low temperature regime by Atomic Layer Deposition (ALD). We discuss electrical properties of such films and show that low temperature deposition results in oxygen-rich ZnO layers in which free carrier concentration is very low. For optimized ALD process it can reach the level of 10 15 cm -3, while mobility of electrons is between 20 and 50 cm 2/V·s. Electrical parameters of ZnO films deposited by ALD at low temperature regime are appropriate for constructing of the ZnO-based p-n and Schottky junctions. We demonstrate that such junctions are characterized by the rectification ratio high enough to fulfill requirements of 3D memories and are deposited at temperature 100 oC which makes them appropriate for deposition on organic substrates. PACs: 81.15.Gh, 72.80.Ey, 73.40.Lq, 68.55.Ln Keywords: Atomic Layer Deposition, Zinc Oxide, thin films, electrical properties, Schottky junction, 3D memories 1 1.
    [Show full text]
  • The Growth and Characterization of Gallium Arsenide Nanowire Structures by Metal Organic Chemical Vapor Deposition
    The Growth and Characterization of Gallium Arsenide Nanowire Structures by Metal Organic Chemical Vapor Deposition DISSERTATION Presented in Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy in the Graduate School of The Ohio State University By Nicholas G. Minutillo Graduate Program in Physics The Ohio State University 2014 Dissertation Committee: Professor Fengyuan Yang, Advisor Professor Jay A. Gupta Professor Klaus Honscheid Professor Mohit Randeria Copyright by Nicholas Gaetano Minutillo 2014 Abstract Semiconductor nanowires hold a wealth of promise for studying the fundamental physics of electron behavior and interactions in a quasi-one dimensional environment as well as components in or the foundation of technological advancement in electronic and spintronic devices. Especially in the case of spintronic applications, the crystalline environment must be highly controlled. Unlike in electronic devices, predicated on the transport or storage of charges, spintronic devices often depend on relative phases of spin states. These phases are easily lost in an environment where scattering probabilities are high. In any material system, control of the material fabrication is the limiting factor to achieving the theoretical characteristics and operation. Still an active area of research, bottom-up synthesis of semiconductor nanowires has yet to reach the level of control required for wide spread adoption as a base system in condensed matter research. At this point in time, the material synthesis to meet the criteria for advanced applications remains a bottle neck in advancing the application of GaAs or any other semiconductor nanowires. In this dissertation we discuss the vapor-liquid-solid (VLS) mechanism and its role in the growth of gallium arsenide and other III-V semiconductors.
    [Show full text]