TG/DA COLLETCHUCKS TG/DA COLLET CHUCKS www.lyndexnikken.com · TG/DA COLLETCHUCKS 847.367.4800 185

TG/DA Collet Chucks TG/DA Collet Chucks 186 TG ColletChuckFeatures www.lyndexnikken.com · • • • • Tapers aregroundtoAT3 standardsorbetter Lyndex-Nikken TGholdersprovidegreatrigidity Heat treatedto58HRc Made fromlowcarbon4115Chromoly • • • 847.367.4800 TG/DA COLLETCHUCKS ER colletchucks clamping torque than16degree allows highprecisionandgreater Included 8degreecolletangle style collets pressure coolant-thrucapable Available instandardandhigh cylindricity to maintainprecisionIDbore heat treatedandCNCslotted Made from4145Chromoly, • • • Improves T.I.R. towearcuttingtoolsevenly maintaining repeatabilityofaccuracy Bearing Nutsreducecollettwisting, come standardwithbearingnuts All Lyndex-Nikken TGColletChucks TG/DA COLLETCHUCKS • • • Precision groundandslotted hardness andflexibility Heat treatedandstressrelieved foroptimal Made fromChromoly4150 DA ColletChuckFeatures www.lyndexnikken.com · • • • • • Collet Chuckshigherclampingtorque thanthecompetition. between thenutandholder, givingLyndex-Nikken DA Aerospace J-stylethreadprovidessmoothtorque transmission Balanced toG6.3at20,000RPM Tapers aregroundtoAT3 standardsorbetter making theseholdersidealfordrilling Lyndex-Nikken DAholdershaveastrongcasehardening, Made fromlowcarbon4115Chromoly • • clamping torque tothecuttingtool tocolletassures maximum Ground matingsurface Made fromChromoly4150 847.367.4800 187

TG/DA Collet Chucks TG/DA Collet Chucks Toolholder AssemblyProcedure TG ColletChuckscomewithback-upscrew. CAT50 TG ColletChuckscomewithback-upscrew. CAT40 • • C5037-1000-10.00 C5027-1000-7.50 C5017-1000-5.50 C5007-1000-3.50 C4017-1000-5.50 C4007-1000-3.50 C40S7-1000-2.75 Part Number Part Number Part nut atanangle. To remove:simplysqueezethe colletwhilepullingitfromthechuck recommended tighteningtorque. a cuttingtool,andtightenwith theappropriatenutwrenchto collar isfullyseated.Thenloadtheassemblyintochuck, insert and pressingitsfaceintothechucknut’s retainingringuntilthecollet’s To thecolletintochucknutbysqueezing use:firstinsert 188 AT3 orbettertaper between retentionknobandholder Ground surfaceforperpendicularcontact Standard Standard Standard Standard Standard Standard Stubby Style Style Series Series Collet Collet 100TG 100TG 100TG 100TG 100TG 100TG 100TG Pages 192-195 TG Collets CAT TGColletChucks

Range Range 3/64-1" 3/64-1" 3/64-1" 3/64-1" 3/64-1" 3/64-1" 3/64-1" Collet Collet www.lyndexnikken.com · 100TG-SPAN 100TG-SPAN 100TG-SPAN 100TG-SPAN 100TG-SPAN 100TG-SPAN 100TG-SPAN Wrench Wrench Nut Nut 10.00" Page 196 TG Torque Wrench 7.50" 5.50" 3.50" 5.50" 3.50" 2.75" depending on the toolholder shank, weight, balanceability and the G rating. depending onthetoolholdershank,weight,balanceabilityandGrating. Please notethatthemaximumRPMlistedinourcatalogmayvary RPM L L 2.13" 2.13" 2.13" 2.13" 2.13" 2.13" 2.13" L1 L1 847.367.4800 TG/DA COLLETCHUCKS Set-up: quickandeasy Speed: upto20,000rpm T.I.R.: <.0002"atcolletface 3.50" 2.50" 2.50" 2.50" 2.50" 2.50" 2.50" D D See TGCoolantColletsonpages192-193. No disc,specialnutorwrench required! Collet Chuckshavecoolant-thru capabilities. When removingtheback-upscrew, TG Page 196 TG BackUpScrew L L Standard D D Stubby Reaming Milling Drilling Tapping Page 196 TG Nut

L1 L1 TG/DA COLLETCHUCKS depending on the toolholder shank, weight, balanceability and the G rating. depending onthetoolholdershank,weight,balanceabilityandGrating. Please notethatthemaximumRPMlistedinourcatalogmayvary Toolholder AssemblyProcedure TG ColletChuckscomewithback-upscrew. BT30/40/50 RPM COOLANT-THRU B5007-1000-3.50 B4007-1000-3.50 B4017-0250-4.00 B4007-0250-2.00 B3007-1000-3.94 B3007-0750-2.50 B3017-0250-4.00 B3007-0250-1.75 Part Number Part nut atanangle. To remove:simplysqueezethe colletwhilepullingitfromthechuck recommended tighteningtorque. a cuttingtool,andtightenwith theappropriatenutwrenchto collar isfullyseated.Thenloadtheassemblyintochuck, insert and pressingitsfaceintothechucknut’s retainingringuntilthecollet’s To thecolletintochucknutbysqueezing use:firstinsert Pages 192-195 TG Collets Coolant-Thru: thru-toolcoolant Set-up: quickandeasy Speed: upto20,000rpm T.I.R.: <.0002"atcolletface Style BT50 BT40 BT40 BT40 BT30 BT30 BT30 BT30 Series Collet 100TG 100TG 100TG 25TG 25TG 75TG 25TG 25TG Page 196 TG Torque Wrench 3/64-1/4" 3/64-1/4" 3/64-3/4" 3/64-1/4" 3/64-1/4" BT TGColletChucks 3/64-1" 3/64-1" 3/64-1" Range Collet www.lyndexnikken.com · 100TG-SPAN 100TG-SPAN 100TG-SPAN 75TG-SPAN Wrench 25TG-HEX 25TG-HEX 25TG-HEX 25TG-HEX Nut Reaming Milling Drilling Tapping

3.50" 3.50" 4.00" 2.00" 3.94" 2.50" 4.00" 1.75" L Page 196 TG BackUpScrew 2.13" 2.13" 0.61" 0.61" 2.24" 1.61" 0.61" 0.61" L1 2.50" 2.50" 0.75" 0.75" 2.50" 1.89" 0.75" 0.75" D • • 847.367.4800 AT3 orbettertaper between retentionknobandholder Ground surfaceforperpendicularcontact See TGCoolantColletsonpages193-195. No disc,specialnutorwrench required! Collet Chuckshavecoolant-thru capabilities. When removingtheback-upscrew, TG Page 196 TG Nut L D 189 L1

TG/DA Collet Chucks TG/DA Collet Chucks Toolholder AssemblyProcedure • • Notes: NMTB40/50 N5007-1000-3.50 N4007-1000-3.00 Part Number Part nut atanangle. To remove:simplysqueezethe colletwhilepullingitfromthechuck recommended tighteningtorque. a cuttingtool,andtightenwith theappropriatenutwrenchto collar isfullyseated.Thenloadtheassemblyintochuck, insert and pressingitsfaceintothechucknut’s retainingringuntilthecollet’s To thecolletintochucknutbysqueezing use:firstinsert 190 NMTB shanksaresuitableforusewithEricksonQuickChangespindles. TG ColletChuckscomewithback-upscrew. NMTB50 NMTB40 Style Series Collet 100TG 100TG Pages 192-195 TG Collets NMTB TGColletChucks 3/64-1" 3/64-1" Range Collet www.lyndexnikken.com · 100TG-SPAN 100TG-SPAN Wrench Nut Page 196 TG Torque Wrench 3.50" 3.00" COOLANT-THRU L 2.12" 2.12" L1 847.367.4800 TG/DA COLLETCHUCKS Coolant-Thru: thru-toolcoolant Set-up: quickandeasy T.I.R.: <.0002"atcolletface 2.50" 2.50" D See TGCoolantColletsonpages194-195. No disc,specialnutorwrench required! Collet Chuckshavecoolant-thru capabilities. When removingtheback-upscrew, TG Page 196 TG BackUpScrew L D Reaming Milling Drilling Tapping Page 196 TG Nut L1 TG/DA COLLETCHUCKS Toolholder AssemblyProcedure TG ColletChuckscomewithback-upscrew. Straight Shank • • • • Features ofStraightShankTooling COOLANT-THRU S1507-1000-9.00 Part Number Part nut atanangle. To remove:simplysqueezethe colletwhilepullingitfromthechuck recommended tighteningtorque. a cuttingtool,andtightenwith theappropriatenutwrenchto collar isfullyseated.Thenloadtheassemblyintochuck, insert and pressingitsfaceintothechucknut’s retainingringuntilthecollet’s To thecolletintochucknutbysqueezing use:firstinsert large holesorwhenevertightclearancesareencountered drillingoperationswithin When loadedintolargerholders,theirreducedO.D.permits They maybeusedwithanysizemachiningcenterorlathe This optionislesscostlythanextendedlengthintegralshanktooling Straight shanktoolingmaybeusedtoextendreachforextendedlengthoperations Pages 192-195 TG Collets T.I.R.: <.0002"atcolletface Coolant-Thru: thru-toolcoolant Set-up: quickandeasy Straight ShankTGColletChucks Series Collet 100TG 3/64-1" Range Collet Page 196 TG Torque Wrench 100TG-SPAN Wrench Nut 1.50" www.lyndexnikken.com · D 9.00" L Reaming Milling Drilling Tapping 2.73" L1 Page 196 TG BackUpScrew 6.00" L2 2.50" D1 847.367.4800 Page 196 TG Nut L2 L1 D1 D 191 L

TG/DA Collet Chucks TG/DA Collet Chucks • • Notes: Dimensional Data Size Range:1/8"-1/2" Inch TG standardcolletscollapseapproximately1/64" 050-032 050-031 050-030 050-029 050-028 050-027 050-026 050-025 050-024 050-023 050-022 050-021 050-020 050-019 050-018 050-017 050-016 050-015 050-014 050-013 050-012 050-011 050-010 050-009 050-008 50TG 75TG 100TG 150TG Part Number Part Style 192 Accuracy: Lessthan 0.0005"at4xD. Tolerance: Guaranteedtobewithin0.0002"atthecollet nose. 0.760" 1.063" 1.278" 1.875" D 31/64" 15/32" 29/64" 27/64" 13/32" 25/64" 23/64" 11/32" 21/64" 19/64" 17/64" 15/64" 13/64" 11/64" 7/16" 5/16" 9/32" 7/32" 3/16" 5/32" 9/64" Size 1/2" 3/8" 1/4" 1/8" 0.594" 0.871" 1.121" 1.678" D1 50TG Collets www.lyndexnikken.com · 1.437" 1.844" 2.386" 3.000" L Collet Range 1/2"-1.1/2" 3/64-3/4" 1/8-1/2" 3/64-1" Nut Tightening 100 ft.lbs 35 ft.lbs 55 ft.lbs 75 ft.lbs Torque 847.367.4800 TG/DA COLLETCHUCKS 50TG Collets D1 D 8° L TG/DA COLLETCHUCKS Size Range:3/64"-3/4" Inch TG standardcolletscollapseapproximately1/64" 075-048 075-047 075-046 075-045 075-044 075-043 075-042 075-041 075-040 075-039 075-038 075-037 075-036 075-035 075-034 075-033 075-032 075-031 075-030 075-029 075-028 075-027 075-026 075-025 075-024 075-023 075-022 075-021 075-020 075-019 075-018 075-017 075-016 075-015 075-014 075-013 075-012 075-011 075-010 075-009 075-008 075-007 075-006 075-005 075-004 075-003 Part Number Part 47/64" 23/32" 45/64" 11/16" 43/64" 21/32" 41/64" 39/64" 19/32" 37/64" 35/64" 17/32" 33/64" 31/64" 15/32" 29/64" 27/64" 13/32" 25/64" 23/64" 11/32" 21/64" 19/64" 17/64" 15/64" 13/64" 11/64" 9/16" 7/16" 5/16" 9/32" 7/32" 3/16" 5/32" 9/64" 7/64" 3/32" 5/64" 1/16" 3/64" Size 3/4" 5/8" 1/2" 3/8" 1/4" 1/8" Size Range:1/8"-3/4" full lengthofthe collet. the Notes: Cuttermust beinserted Inch -Coolant-Thru 075-048(C) 075-047(C) 075-046(C) 075-045(C) 075-044(C) 075-043(C) 075-042(C) 075-041(C) 075-040(C) 075-039(C) 075-038(C) 075-037(C) 075-036(C) 075-035(C) 075-034(C) 075-033(C) 075-032(C) 075-031(C) 075-030(C) 075-029(C) 075-028(C) 075-027(C) 075-026(C) 075-025(C) 075-024(C) 075-023(C) 075-022(C) 075-021(C) 075-020(C) 075-019(C) 075-018(C) 075-017(C) 075-016(C) 075-015(C) 075-014(C) 075-013(C) 075-012(C) 075-011(C) 075-010(C) 075-009(C) 075-008(C) - - - - - Part Number Part www.lyndexnikken.com · 75TG Collets 47/64" 23/32" 45/64" 11/16" 43/64" 21/32" 41/64" 39/64" 19/32" 37/64" 35/64" 17/32" 33/64" 31/64" 15/32" 29/64" 27/64" 13/32" 25/64" 23/64" 11/32" 21/64" 19/64" 17/64" 15/64" 13/64" 11/64" 9/16" 7/16" 5/16" 9/32" 7/32" 3/16" 5/32" 9/64" Size 3/4" 5/8" 1/2" 3/8" 1/4" 1/8" - - - - - 847.367.4800 coolant leakage willresult. of thecollet.Iftheseconditions arenotmet, thefulllength Cutting toolshouldbeinserted for usewithcylindricalshank tools(noflats). These patentedcoolantcollets aredesigned • • • Notes: 75TG ColletsSets 075-SET-45 075-SET-27 075-SET-23 075-SET-17 075-SET-12 75TG Collet-Coolant-Thru 75TG Collet on page192. See dimensionaldataforTGCollets for coolantcollet. Range collapsibilityis0.004-0.006" coolant pressureof1000psi. Our coolantcolletssealuptoamaximum 3/32" -1/2"by1/64ths 1/16" -3/4"by1/16ths 1/16" 3/4"by1/32nds 1/16" 3/4"by1/64ths 45 Piece75TGColletSet: 27 Piece75TGColletSet: 23 Piece75TGColletSet: 17 Piece75TGColletSet: 12 Piece75TGColletSet: 1/8" -3/8by1/64ths 193

TG/DA Collet Chucks TG/DA Collet Chucks Size Range:3/64"-1" Inch 100-064 100-063 100-062 100-061 100-060 100-059 100-058 100-057 100-056 100-055 100-054 100-053 100-052 100-051 100-050 100-049 100-048 100-047 100-046 100-045 100-044 100-043 100-042 100-041 100-040 100-039 100-038 100-037 100-036 100-035 100-034 100-033 100-032 100-031 100-030 100-029 100-028 100-027 100-026 100-025 100-024 100-023 100-022 100-021 100-020 100-019 100-018 100-017 100-016 100-015 100-014 100-013 100-012 100-011 100-010 100-009 100-008 100-007 100-006 100-005 100-004 100-003 Part Number Part 194 63/64" 31/32" 61/64" 15/16" 59/64" 29/32" 57/64" 55/64" 27/32" 53/64" 13/16" 51/64" 25/32" 49/64" 47/64" 23/32" 45/64" 11/16" 43/64" 21/32" 41/64" 39/64" 19/32" 37/64" 35/64" 17/32" 33/64" 31/64" 15/32" 29/64" 27/64" 13/32" 25/64" 23/64" 11/32" 21/64" 19/64" 17/64" 15/64" 13/64" 11/64" Size 9/16" 7/16" 5/16" 9/32" 7/32" 3/16" 5/32" 9/64" 7/64" 3/32" 5/64" 1/16" 3/64" 7/8" 3/4" 5/8" 1/2" 3/8" 1/4" 1/8" 1" 100TG Collets TG standardcolletscollapseapproximately1/64" www.lyndexnikken.com · full lengthofthe collet. the Note: Cuttermust beinserted Size Range:1/4"-1" Inch -Coolant-Thru 100-064(C) 100-063(C) 100-062(C) 100-061(C) 100-060(C) 100-059(C) 100-058(C) 100-057(C) 100-056(C) 100-055(C) 100-054(C) 100-053(C) 100-052(C) 100-051(C) 100-050(C) 100-049(C) 100-048(C) 100-047(C) 100-046(C) 100-045(C) 100-044(C) 100-043(C) 100-042(C) 100-041(C) 100-040(C) 100-039(C) 100-038(C) 100-037(C) 100-036(C) 100-034(C) 100-033(C) 100-032(C) 100-031(C) 100-030(C) 100-029(C) 100-028(C) 100-027(C) 100-026(C) 100-025(C) 100-024(C) 100-023(C) 100-022(C) 100-021(C) 100-020(C) 100-019(C) 100-018(C) 100-017(C) 100-016(C) ------Part Number Part 63/64" 31/32" 61/64" 15/16" 59/64" 29/32" 57/64" 55/64" 27/32" 53/64" 13/16" 51/64" 25/32" 49/64" 47/64" 23/32" 45/64" 11/16" 43/64" 21/32" 41/64" 39/64" 19/32" 37/64" 17/32" 33/64" 31/64" 15/32" 29/64" 27/64" 13/32" 25/64" 23/64" 11/32" 21/64" 19/64" 17/64" Size 9/16" 7/16" 5/16" 9/32" 7/8" 3/4" 5/8" 1/2" 3/8" 1/4" 1" ------847.367.4800 TG/DA COLLETCHUCKS 100TG ColletSets 100TG CoolantColletsSets coolant leakage willresult. of thecollet.Iftheseconditions arenotmet, thefulllength Cutting toolshouldbeinserted for usewithcylindricalshank tools(noflats). These patentedcoolantcollets aredesigned • • • Notes: thefulllengthofcollet. Notes: Cuttermustbeinserted 100-SET-41(C) 100-SET-21(C) 100-SET-11(C) 100-SET-59 100-SET-45 100-SET-41 100-SET-30 100-SET-23 100-SET-21 100-SET-15 100-SET-11 100-SET-08 100TG Collet on page192. See dimensionaldataforTGCollets for coolantcollet. Range collapsibilityis0.004-0.006" coolant pressureof1000psi. Our TGcoolantcolletssealsuptomaximum 23 Piece100TGColletSet:1/16"-3/4"by1/32nds 45 Piece100TGColletSet:1/16"-3/4"by1/64ths 30 Piece100TGColletSet:3/32"-1"by1/32nds 21 Piece100TGColletSet:3/8"-1"by1/32nds 41 Piece100TGColletSet:3/8"-1"by1/64ths 15 Piece100TGColletSet:1/8"-1"by1/16ths 11 Piece100TGColletSet:3/8"-1"by1/16ths 59 Piece100TGColletSet:3/32"-by1/64ths 8 Piece100TGColletSet:1/8"-1"by1/8ths 41 Piece100TGCoolantColletSet: 21 Piece100TGCoolantColletSet: 11 Piece100TGCoolantColletSet: 3/8" -1"by1/32nds 3/8" -1"by1/64ths 3/8" -1"by1/16ths TG/DA COLLETCHUCKS 100TG ColletsSets • • • • Notes: Size Range:4mm-26mm Metric TG standardcolletscollapseapproximately1/64" 100-226 100-225 100-224 100-222 100-220 100-218 100-216 100-214 100-212 100-210 100-208 100-206 100-204 100-SET-213-MM Part Number Part See dimensionaldataforTGColletsonpage192. Range collapsibilityis0.004-0.006"forcoolantcollet. Our coolantcolletssealuptoamaximumpressureof1000psi. thefulllengthofcollet. Cutter mustbeinserted 13 Piece100TGMetricColletSet:4mm-26mm 26mm 25mm 24mm 22mm 20mm 18mm 16mm 14mm 12mm 10mm Size 8mm 6mm 4mm Metric -Coolant-Thru Size Range:6mm-26mm 100-226(C) 100-225(C) 100-224(C) 100-222(C) 100-220(C) 100-218(C) 100-216(C) 100-214(C) 100-212(C) 100-210(C) 100-208(C) 100-206(C) - Part Number Part www.lyndexnikken.com · 100TG Collets 26mm 25mm 24mm 22mm 20mm 18mm 16mm 14mm 12mm 10mm Size 8mm 6mm - 847.367.4800 coolant leakagewillresult. of thecollet.Iftheseconditionsarenotmet, thefulllength Cutting toolshouldbeinserted for usewithcylindricalshanktools(noflats). These patentedcoolantcolletsaredesigned 100TG Collet-Coolant-Thru 100TG Collet 195

TG/DA Collet Chucks TG/DA Collet Chucks Torque Wrench andAttachment forTGColletChuck Spanner Wrench forTGColletChuck Replacement Back-UpScrewsforTGColletChuck Replacement NutPartsforTGColletChuck Replacement NutforTGColletChuck 100TG ColletRack TQW-TG150(82) TQW-TG100(63) TQW-TG075(50) TQW-150 150TG-SPAN 100TG-SPAN 75TG-SPAN 50TG-SPAN 150G-3C 150TG-3 100TG-3C 100TG-3 75TG-3C 75TG-3 50TG-3 150TG-1 100TG-1 75TG-1 50TG-1 150TG-NUT 100TG-HEXNUT 100TG-NUT 75TG-NUT 50TG-NUT RACK-5C/100TG/SK25 196 Part Number Part Number Part Number Part Number Part Number Part Number Part Torque Wrench forER11/16/20/25/32/40ChuckNut TG Accessories TG150 Attachmentfor TQW-150 torquewrench TG100 AttachmentforTQW-150 torquewrench TG75 AttachmentforTQW-150 torquewrench 100TG ColletRack,30piececapacity 150TG NutBearing/SpacerSet 100TG NutBearing/SpacerSet www.lyndexnikken.com · 75TG NutBearing/SpacerSet 50TG NutBearing/SpacerSet 150TG CoolantBack-upscrew 100TG CoolantBack-upscrew 75TG CoolantBack-upscrew Fits 150TGColletChuckNut Fits 100TGColletChuckNut Fits 75TGColletChuckNut Fits 50TGColletChuckNut 150TG Back-upscrew 100TG Back-upscrew 75TG Back-upscrew 50TG Back-upscrew Description Description Description Description Description Description 100TG HexNut 150TG Nut 100TG Nut 75TG Nut 50TG Nut 847.367.4800 TG/DA COLLETCHUCKS TG/DA COLLETCHUCKS cracking ofcollet,toolholder, orcolletnut. orradialloadisapplied. Productwarrantydoesnotapplyagainst overtightened DA ColletChucksarenotdesignedformillingandcancrackat thenosewhen Note: Forlightormediummilling,werecommendusingER TG ColletChucks. BT30 CAT40 B3007-0300-3.00 B3007-0200-3.00 B3007-0180-3.00 B3007-0100-3.00 C4007-0200-3.00 C4007-0180-4.00 C4017-0100-6.00 C4007-0100-3.50 Part Number Part Number Part Set-up: quickandeasy T.I.R.: minimal CAT andBTDAColletChucks Taper Taper CAT40 CAT40 CAT40 CAT40 BT30 BT30 BT30 BT30 Pages 199-200 DA Collets Series Series Collet Collet 300DA 200DA 180DA 100DA 200DA 180DA 100DA 100DA Collet Range Collet Range 3/64 -9/16" 3/64 -9/16" 3/64 -9/16" 3/64 -1/4" 3/64 -3/8" 3/64 -3/4" 3/64 -3/8" 3/64 -3/4" www.lyndexnikken.com · 3.00" 3.00" 3.00" 3.00" 3.00" 4.00" 6.00" 3.50" L L Drilling Reaming Page 201 DA BackUpScrew 1.04" 1.03" 1.51" 1.15" 1.03" 1.50" 1.15" 1.15" L1 L1 0.55" 0.86" 1.44" 1.06" 0.86" 1.44" 1.06" 1.06" D D 847.367.4800 Page 201 DA Nut L L D D 197 L1 L1

TG/DA Collet Chucks TG/DA Collet Chucks cracking ofcollet,toolholder, orcolletnut. orradialloadisapplied. Productwarrantydoesnotapplyagainst overtightened DA ColletChucksarenotdesignedformillingandcancrackat thenosewhen Note: Forlightormediummilling,werecommendusingER TG ColletChucks. DA ColletChuckExtensions NMTB shanksaresuitableforusewithEricksonQuickChangespindles. NMTB 30 N3007-0200-2.50 N3007-0100-2.75 030-EXT-500 030-EXT-500S 020-EXT-750 020-EXT-750S 018-EXT-125 018-EXT-125S 010-EXT-100 010-EXT-100S Part Number Part Part Number Part 198 Collet series 300DA 300DA 200DA 200DA 180DA 180DA 100DA 100DA NMTB30 NMTB30 Taper 3/64-9/16" 3/64-9/16" 3/64-1/4" 3/64-1/4" 3/64-3/8" 3/64-3/8" 3/64-3/4" 3/64-3/4" Range Collet Series Collet 200DA 100DA NMTB DAColletChuck/DAChuckExtension Pages 199-200 DA Collets Collet Range 6.92" 4.42" 7.17" 4.67" 7.40" 4.90" 7.44" 4.94" 3/64-9/16" 3/64-3/8" www.lyndexnikken.com · L 1.18" 1.18" 1.34" 1.34" 1.83" 1.83" 1.66" 1.66" L1 2.50" 2.75" 5.50" 3.00" 5.50" 3.00" 5.50" 3.00" 5.50" 3.00" L L2 1.03" 1.15" 1-1/4" 1-1/4" L1 1/2" 1/2" 3/4" 3/4" 1" 1" D Page 201 DA BackUpScrew 847.367.4800 TG/DA COLLETCHUCKS Set-up: quickandeasy T.I.R.: minimal 0.86" 1.06" 0.55" 0.55" 0.86" 0.86" 1.44" 1.44" 1.06" 1.06" D1 D Page 201 DA Nut L L2 L1 D1 D D Reaming Drilling L L1 TG/DA COLLETCHUCKS DA ColletDimensionalData Size Range:3/64"-1/4" DA Colletscollapseapproximately1/32" 300DA ColletsSets 300DA Collets 030-016 030-015 030-014 030-013 030-012 030-011 030-010 030-009 030-008 030-007 030-006 030-005 030-004 030-003 180DA 100DA 200DA 300DA 030-SET-14 030-SET-13 030-SET-09 030-SET-07 Part Number Part Number Part Style 14 Piece300DAColletSet: 13 Piece300DAColletSet: 1/16 -1/4"by1/32nds 3/64 -1/4"by1/64ths 1/16 -1/4"by1/64ths 9 Piece300DAColletSet: 7 Piece300DAColletSet: 1/8 -1/4"by1/64ths 1.035" 0.769" 0.539" 0.375" D 300DA and200DACollets Size 15/64" 13/64" 11/64" 7/32" 3/16" 5/32" 9/64" 7/64" 3/32" 5/64" 1/16" 3/64" Size 1/4" 1/8" 0.873" 0.653" 0.453" 0.300" D1 200DA ColletsSets Size Range:3/64"-3/8" 200DA Collets 020-024 020-023 020-022 020-021 020-020 020-019 020-018 020-017 020-016 020-015 020-014 020-013 020-012 020-011 020-010 020-009 020-008 020-007 020-006 020-005 020-004 020-003 020-SET-21 020-SET-17 020-SET-11 020-SET-09 1.637" 1.441" 1.193" 1.000" Part Number Part Number L Part www.lyndexnikken.com · 3/64-9/16" 3/64-3/4" 3/64-3/8" 3/64-1/4" Range Collet 21 Piece200DAColletSet: 17 Piece200DAColletSet: 11 Piece200DAColletSet: 1/16 -3/8"by1/32nds 1/16 -3/8"by1/64ths 9 Piece200DAColletSet: 1/8 -3/8"by1/32nds 1/8 -3/8"by1/64ths Nut Tightening Size 23/64" 11/32" 21/64" 19/64" 17/64" 15/64" 13/64" 11/64" 5/16" 9/32" 7/32" 3/16" 5/32" 9/64" 7/64" 3/32" 5/64" 1/16" 3/64" Size 3/8" 1/4" 1/8" 40 ft.lbs 35 ft.lbs 25 ft.lbs 18 ft.lbs Torque 847.367.4800 200DA Collet 300DA Collet D1 D 199 L

TG/DA Collet Chucks TG/DA Collet Chucks DA colletsonpage199. Note: Seedimensionaldatafor Size Range:3/64"-9/16" 100DA Collets DA colletscollapseapproximately1/32" 010-036 010-035 010-034 010-033 010-032 010-031 010-030 010-029 010-028 010-027 010-026 010-025 010-024 010-023 010-022 010-021 010-020 010-019 010-018 010-017 010-016 010-015 010-014 010-013 010-012 010-011 010-010 010-009 010-008 010-007 010-006 010-005 010-004 010-003 Part Number Part 200 35/64" 17/32" 33/64" 31/64" 15/32" 29/64" 27/64" 13/32" 25/64" 23/64" 11/32" 21/64" 19/64" 17/64" 15/64" 13/64" 11/64" 9/16" 7/16" 5/16" 9/32" 7/32" 3/16" 5/32" 9/64" 7/64" 3/32" 5/64" 1/16" 3/64" Size 1/2" 3/8" 1/4" 1/8" 100DA and180DACollets www.lyndexnikken.com · Size Range:3/64"-3/4" 180DA Collets 018-048 018-047 018-046 018-045 018-044 018-043 018-042 018-041 018-040 018-039 018-038 018-037 018-036 018-035 018-034 018-033 018-032 018-031 018-030 018-029 018-028 018-027 018-026 018-025 018-024 018-023 018-022 018-021 018-020 018-019 018-018 018-017 018-016 018-015 018-014 018-013 018-012 018-011 018-010 018-009 018-008 018-007 018-006 018-005 018-004 018-003 Part Number Part 47/64" 23/32" 45/64" 11/16" 43/64" 21/32" 41/64" 39/64" 19/32" 37/64" 35/64" 17/32" 33/64" 31/64" 15/32" 29/64" 27/64" 13/32" 25/64" 23/64" 11/32" 21/64" 19/64" 17/64" 15/64" 13/64" 11/64" 9/16" 7/16" 5/16" 9/32" 7/32" 3/16" 5/32" 9/64" 7/64" 3/32" 5/64" 1/16" 3/64" Size 3/4" 5/8" 1/2" 3/8" 1/4" 1/8" 847.367.4800 TG/DA COLLETCHUCKS 100DA ColletSets 180DA ColletSets 010-SET-11 010-SET-08 018-SET-41 018-SET-33 018-SET-21 018-SET-17 018-SET-09 010-SET-33 010-SET-29 010-SET-21 010-SET-17 010-SET-15 100DA Collet 180DA Collet 21 Piece100DAColletSets:1/4-9/16"by1/64ths 11 Piece100DAColletSet:1/4-9/16"by1/32nds 15 Piece100DAColletSet:1/8-9/16"by1/32nds 29 Piece100DAColletSet:1/8-9/16"by1/64ths 17 Piece100DAColletSet:1/16-9/16"by1/32nds 21 Piece180DAColletSet:1/8-3/4" by 1/32nds 17 Piece180DAColletSet:1/4-3/4"by1/32nds 33 Piece100DAColletSet:1/16-9/16"by1/64ths 8 Piece100DAColletSet:1/8-9/16"by1/16ths 41 Piece180DAColletSet:1/8-3/4" by 1/64ths 33 Piece180DAColletSet:1/4-3/4" by 1/64ths 9 Piece180DAColletSet:1/4-3/4"by1/16ths TG/DA COLLETCHUCKS Replacement Back-upScrewsforDAColletChuck Replacement NutPartsforDAColletChuck Replacement NutforDAColletChuck 300DA-4 300DA-3 200DA-5 200DA-4 200DA-3 180DA-4 180DA-3 100DA-4 100DA-3 300DA-2 300DA-1 200DA-2 200DA-1 180DA-2 180DA-1 100DA-2 100DA-1 300DA-NUT 200DA-NUT 180DA-NUT 100DA-NUT Part Number Part Number Part Number Part Back-up screwforallCT, BT, NMTB,300DAColletChucks Back-up screwforBT30&BT35200DAColletChucks Back-up screwforall40-taper200DAColletChucks Back-up screwforallCT, BT, NMTB180DAChucks Back-up screwforallCT, BT, NMTB100DAChucks Back-up screwfor300DAColletChuckExtensions Back-up screwfor200DAColletChuckExtensions Back-up screwfor180DAColletChuckExtensions Back-up screwfor100DAChuckExtensions 300DA NutRetainingRing 200DA NutRetainingRing 180DA NutRetainingRing 100DA NutRetainingRing 300DA NutSpacer 200DA NutSpacer 180DA NutSpacer 100DA NutSpacer Description Description Description 300DA Nut 200DA Nut 180DA Nut 100DA Nut www.lyndexnikken.com · DA Accessories 847.367.4800 201

TG/DA Collet Chucks TORQUE TEST DEMOS

SEE THE DIFFERENCE IN TORQUE IN UNDER 10 MINUTES: Lyndex-Nikken Other Brands CAT40 ER32 High Torque Collet Chuck CAT40 ER32 Collet Chuck Collet Size: 1/2” collet Collet Size: 1/2” collet Tool Shank Size: 1/2” Tool Shank Size: 1/2” Tightening Torque: 85 ft-lbs. Tightening Torque: 85 ft-lbs.

Cutting tool GRIPS at 75 ft-lbs. Cutting tool SLIPS at 35 ft-lbs.

214% higher gripping force View our ER Torque test by viewing on our YouTube channel. Not convinced? than other brands! Contact us for a live demo! Benefits of Higher Gripping Force • Precision ground bearing nut for additional gripping force* (*nut included as standard) • Machine with higher chip load and reduce cycle time • Reduction in end mill pulling reduces scrapping parts • Eliminate over tightening that can lead to collet damage and excessive run-out • Better overall cutting condition

To schedule a demo, contact your Lyndex-Nikken Regional Sales Manager OR send an e-mail to: [email protected]

Connect with us on our Phone: (847) 367-4800 Email: [email protected] www.lyndexnikken.com social media channels!