Dye Stain UV (12.2 M2/L)

Dye Stain UV (12.2 m2/L). Recoating will intensify color.

COMPOSITION & PROPERTIES Dye Stain UV is a fast-drying, semi- transparent, alcohol-based dye stain. It can be reduced with DyeAdd (additive) or AlcoThin (methyl alcohol).

TYPES 1. Product Name Dye Stain UV is available from the Dye Stain UV factory in 23 colors. Dye Stain UV colors can be reduced or intermixed 2. Manufacturer to achieve a wide variety of custom application and curing period. Verify WOOD KOTE PRODUCTS INC colors. all surfaces to be finished are clean 8000 NE 14th Pl (97211) and dry. Use an electric moisture PO Box 17192 SIZES meter to tes t all wood surfaces. Do not proceed if reading is higher than Portland OR 97217 Dye Stain UV is sold in 16-fl oz 15% without written permission from Tel: (800) 843-7666 (USA & Canada) (473ml), 32-fl oz (946ml), 1-Gal architect/specifier. Tel: (503) 285-8371 (3.8L) HDPE plastic containers, 5- Fax: (503) 285-8374 Gal (19L) and 55 Gallon (208.5 L) Surface Preparation [email protected] metal containers. Sand all wood surfaces in the www.woodkote.com direction of the wood grain with the

4. Technical Data appropriate abrasive grit specified on 3. Product Description PHYSICAL PROPERTIES the finish schedules (usually BASIC USE between 150-220 grit). Sand all See table 1 wood surfaces until all machine Dye Stain UV is intended for professional use only. It is a dye marks and glue are removed and 5. Installation DS wood stain formulated to change the each species has achieved a uniform color of interior wood surfaces such Complete installation specifications smoothness without rough or as furniture, casework, doors, trim, and recommendations are available burnished areas. Remove all paneling and cabinets. Dye Stain UV from the manufacturer. sanding dust from the surfaces to be is fade-resistant and its color finished and from the work area. retention is far superior than aniline PREPARATORY WORK APPLICATION stains. It may be applied to bare or Applicator Qualifications bleached wood. It is compatible with All work shall be performed by skilled Dye Stain UV is intended for spray a variety of other Wood Kote tradesmen experienced in application in-shop or on-site with products. Please refer to the Wood performing work of this type and equipment that is appropriate for that Kote Schedule of Product under the direction of a capable purpose. Dye Stain UV should be Compatibility and Recommended foreman. sprayed onto the surface of the wood Dry Times. Dye Stain UV DOES with an even motion in the direction NOT comply with the US Samples of the wood grain. Extreme care Environmental Protection Agency For each finish system indicated at should be exercised to apply the (EPA) Volatile Organic Compound least two 8-1/2”x11” (19x24.6 cm) product evenly across the surface. It (VOC) emission requirements for pieces should be provided for is recommended that the product be Architectural and Industrial approval. If it is apparent conditions reduced with DyeAdd. If more Maintenance coatings (effective 13- may allow substantial variations, a intense color is desired, subsequent Sep-99). sufficient number of samples should applications can be made in the be created to indicate the ADVANTAGES parameters of the variations. Those ? Fast-drying samples marked “approved” by ? Will not raise wood grain architect/specifier shall serve as the standard for similar work throughout ? Deep appearance the project. ? UV resistance Inspection COVERAGE Verify all surfaces to be finished will One application of Dye Stain UV will be maintained within a temperature cover approximately 500 sq ft/gal range of 45-80ºF (7-27ºC) during

CLEAN UP should only be applied by qualified professionals. Before using any Dye Stain UV should be cleaned from tools and surfaces using an chemical read its label and Material absorbent cloth and AlkoThin. Safety Data Sheet (MSDS).

6. Availability & Cost 8. Maintenance AVAILABILITY STORAGE Dye Stain UV is available through Keep in the original containers tightly recognized Wood Kote retailers or closed when not in use and stored

Dye Stain UV directly from the manufacturer. A list away from direct light at of stocking dealers is available from temperatures between 32-110ºF (0- the manufacturer and can be found 43ºC). on the manufacturer’s web site. CLEANING & REPAIR COST Dye Stain UV is intended to be top- Cost information is available from coated, and therefore, cannot be same manner. The product should recognized Wood Kote retailers or directly cleaned or repaired. be applied in a manner that the from the manufacturer. application is uniform in color, must DISPOSAL be free of streaks, blotches or other 7. Warranty Dispose of only in accordance with defects detrimental to appearance or Dye Stain UV is sold without local, state and federal regulations. performance. warranty except that Wood Kote

guarantees that the product is 9. Technical Services PRECAUTIONS manufactured within the Be certain that on-site conditions specifications provided herein. Additional information is available allow for adequate ventilation and Unless Wood Kote warranties, in directly from the manufacturer and pose no threat of fire or other health writing, specific products on an from the manufacturer’s web site. hazards. Dye Stain UV is a identified project, Wood Kote’s DS penetrating dye and is extremely liability is limited to the replacement 10. Filing Systems difficult to remove once applied. It cost of the product. The information ? Wood Kote–Product Catalog contains UV inhibitors but it is not provided herein is accurate to the ? Additional product information is light fast and will change color with best of Wood Kote’s knowledge or available from the manufacturer exposure to light. Dye Stain UV is a obtained by Wood Kote from sources ? www.woodkote.com wood stain and mus t be properly top- believed by Wood Kote to be coated with lacquer or polyurethane accurate. Wood Kote Products Inc to achieve a complete wood finish. does not assume any legal DO NOT use on surfaces that are responsibility for use or reliance not uniformly sanded. upon this information. Dye Stain UV

Physical Properties Table 1

Mfr No COLOR VOC gm/L FLASH PT 441 Light Brown Mahogany 802 45ºF (7.2ºC) 442 Medium Brown Mahogany 803 45ºF (7.2ºC) 443 Cordovan Mahogany 805 45ºF (7.2ºC) 444 Cherry 802 45ºF (7.2ºC) 445 Amber Fruitwood 807 45ºF (7.2ºC) 446 Golden Fruitwood 803 45ºF (7.2ºC) 447 Jet Black 791 45ºF (7.2ºC) 448 Light Red Mahogany 804 45ºF (7.2ºC) 449 Medium Red Mahogany 800 45ºF (7.2ºC) 450 Hickory 805 45ºF (7.2ºC) 452 American Walnut 801 45ºF (7.2ºC) 453 Medium Brown Walnut 804 45ºF (7.2ºC) 454 Nutmeg Brown 800 45ºF (7.2ºC) 455 Van Dyke Brown 803 45ºF (7.2ºC) 456 Sea Blue 803 45ºF (7.2ºC) 457 Brown Maple 802 45ºF (7.2ºC) 458 Yellow Maple 798 45ºF (7.2ºC) 459 Medium Wheat 801 45ºF (7.2ºC) 460 Dark Green 803 45ºF (7.2ºC) 461 Blood Red 801 45ºF (7.2ºC) 462 Bright Red 795 45ºF (7.2ºC) 463 Lemon Yellow 800 45ºF (7.2ºC) 464 Light Orange Yellow 804 45ºF (7.2ºC)

Wood Kote, Lite-N-Up, WoodPerfect, W -F-C, SprayLaq, KatLaq, Trans Kote, Jel'd Stain, Liqwid Stain, Dye Stain, Dye Kote, Glaze Kote, Crystal Kote Lacquer, BrushLaq, Jel'd Poly Kote, Ultra Poly Kote, Flagship, FloorEver, Clear and Clean, X-Link-R, MacroTint & MiniTint, Korrect -O, Perfecto-O, LaqFlat, PolyFlat, LaqAdd, DyeAdd, LaqThin, WashThin, AlkoThin, AceThin, PolySolvent, Sta-Wax, Lin Soap, C-U-2 are registered trademarks or trade-names of Wood Kote Products Inc.