FINAL PROGRAM
2003 ASME Pressure Vessels & Piping Conference
July 20-24, 2003 Renaissance Cleveland Hotel Cleveland, Ohio USA The American Society of Mechanical Engineers Pressure Vessels & Piping Division
2003 PVP Conference Committee
William J. Bees Ismail T. Kisisel Conference General Chair Technical Program Chair
Co-sponsor Representatives Canadian Society of Mechanical Engineers Don R. Metzger Co-Sponsor Technical Representative ASME NDE Division Chiaki Miyasaka Technical Program Representatives Codes and Standards Gora Chakrabarti Computer Technology Wolf Reinhardt & John Martin Design & Analysis Marina Ruggles-Wrenn Fluid-Structure Interaction Satoyuki Kawano High-Pressure Technology Dan Peters Materials & Fabrication Poh-Sang Lam Operations, Applications, and Components Steve Hensel Seismic Engineering Jian-Chu Chen Student Paper Competition A. G. (Jack) Ware ASME NDE Division Chiaki Miyasaka NDE Demonstration Forum Carl E. Jaske Software Demonstration Forum James F. Cory, Jr. Pressure Vessels and Piping Division Executive Committee (2002-2003) Howard H. Chung Chair William J. Bees Vice Chair Ismail T. Kisisel Professional Development Chair M. K. Au-Yang Honors and Awards Chair Judith Todd Publications Chair James F. Cory, Jr. Program Chair Senate of Past PVP Division Chairs Joseph Sinnappan, Historian (2002-2003) 2001-02 A. G. (Jack) Ware, President (2002-2003) 2000-01 Robert F. Sammataro* 1999-00 Thou-Han Liu 1998-99 William E. Short, II 1997-98 Richard C. Gwaltney 1996-97 Shoei-Sheng Chen 1995-96 Greg L. Hollinger 1994-95 Carl E. Jaske 1993-94 Rudy J. Scavuzzo 1992-93 Sam Y. Zamrik 1991-92 G. E. Otto Widera 1990-91 Robert H. Mallett 1989-90 Robert W. Swindeman 1988-89 Alexander H. C. Marr 1987-88 Jeffrey T. Fong 1986-87 Don B. Van Fossen 1985-86 James R. Farr 1984-85 Charles F. Nash 1983-84 Donald S. Griffin 1982-83 Richard H. Gallagher* 1981-82 L. Eugene Hulbert 1980-81 Robert E. Nickell 1979-80 Roger F. Reedy 1978-79 David H. C. Pai 1977-78 Pedro V. Marcal 1976-77 Harold H. Waite 1975-76 Robert L. Cloud 1974-75 Charles V. Moore 1973-74 Irvin Berman* 1972-73 Danos Kallas* 1971-72 Robert J. Cepluch 1970-71 Charles F. Larson 1969-70 Gunther P. Eschenbrenner 1968-69 Vito Salerno* 1967-68 Dana Young* 1966-67 * Deceased PVP Division Technical Committee Chairs Codes and Standards Mahendra Rana Computer Technology Don R. Metzger Design & Analysis Dennis K. Williams Fluid-Structure Interaction Wing L Cheng High-Pressure Technology Leslie Antalffy Materials & Fabrication Sharif Rahman Operations, Applications, and Components L. Ike Ezekoye Seismic Engineering Kohei Suzuki PVP Division Administrative Committee Chairs Artin A. Dermenjian Membership James Staffiera Publicity Luc H. Geraets International Coordination ASME Journal of Pressure Vessel Technology Sam Y. Zamrik Editor ASME Officers 2003-2004 Reginald I. Vachon President Frank C. Adamek Sr. Vice President, Council of Engineering Donald E. Bray Vice President, Materials and Structures Group ASME Staff Virgil R. Carter Executive Director Thomas Loughlin Managing Director, Engineering Lawrence Kovarovic Director, Engineering Programs Marisa Scalice Meetings Manager Richard Ulvila Manager, Engineering Programs Craig Backhus Publications Sales Barbara Signorelli Technical Paper Publications Welcome to PVP-2003
Welcome to the North Coast of Ohio and the Renaissance City of Cleveland, Ohio for the 2003 ASME Pressure Vessel and Piping Conference. This Conference is the ideal venue to meet colleagues and present ideas that will help shape technology in the 21st Century. The ASME Pressure Vessels and Piping Division sponsors this Conference with co-sponsorship by the Canadian Society of Mechanical Engineers and participation by the ASME NDE Division. More that 600 participants from over 30 countries are expected to be in attendance at the conference.
This year’s Conference Technical Program contains 136 technical sessions, 2 major symposia, five tutorials, a student paper competition, as well as, NDE and software demonstration forums. The Conference proceedings will be published in 16 volumes. By virtue of the continuing international participation, the conference will continue to shape the technology in the pressure vessel industry.
As a compliment to the technical program, we have developed a series of social events. Starting with a musical event on Sunday evening, the Conference-Wide Reception will be held on Monday evening. The Cleveland City Tour will take place on Monday morning, followed by a tour of the Art Museum, Science Museum, and the Botanical Gardens on Tuesday. A trip down memory lane will occur on Wednesday evening to the Western Reserve town of Hale Farm and Homestead in the Cuyahoga National Recreation area. The tour schedule will wind up with a trip to Amish Country and Amish Hospitality, including lunch in one of their homes on Thursday.
The Conference Program Committee
William J. Bees Ismail T. Kisisel Conference General Chair Technical Program Chair 2003 ASME PRESSURE VESSELS & PIPING CONFERENCE Renaissance Cleveland Hotel Cleveland, Ohio
PVP-2003 Program Layout
PVP-2003 Sunday Monday Tuesday Wednesday Thursday Cleveland July 20, 2003 July 21, 2003 July 22, 2003 July 23, 2003 July 24, 2003 7:30a-8:15a Arrival Author’s Author’s Author’s Author’s Breakfast/Briefing Breakfast/Briefing Breakfast/Briefing Breakfast/Briefing Registration Opens Registration Opens Registration Opens Registration Opens (7:30a-4:00p) (7:30a-4:00p) (7:30a-noon) (7:30a-4:00p) 8:30a-10:15a Block 1.1 Block 2.1 Block 3.1 Block 4.1 Open Technical Sessions Technical Sessions Technical Sessions Technical Sessions NDE Demo Software Demo 10:30a-12:15p Block 1.2 Block 2.2 Block 3.2 Block 4.2 Open Plenary Session Technical Sessions Technical Sessions Technical Sessions NDE Demo Software Demo 12:15p-1:45p Lunch Lunch Honors & Awards Lunch Open Technical Committee Technical Committee Luncheon Meetings Meetings (12:30p-2:30p) 2:00p-3:45p Registration Opens Block 1.3 Block 2.3 Block 3.3 Block 4.3 (3:00p-6:00p) Technical Sessions Technical Sessions Conference Wide Training Technical Sessions NDE Demo Software Demo TPR’s, Chairs, Vice Chairs, and Session Developers (2:45p – 4:00p) 4:00p-5:45p Special Tutorial Block 1.4 Block 2.4 Block 4.4 (2:00p – 6:00p) Technical Sessions Technical Sessions Open Technical Sessions NDE Demo Software Demo Conference Evaluation Evening Conference Conference-Wide Open Conference Social Event Cultural Event Reception Hale Farm and Homestead 6:30p – 7:30p (6:30p-8:00p) (5:00p – 10:30p) Index to Program Audio-Visual Practice Room Author Briefing (Author Breakfast) Call for Papers (2004) Committee Meetings Cooperating Societies Guest Program Honors and Awards Luncheon Hotel Floor Plans Disabled Registrants Index of Authors Index of Session Chairs & Vice Chairs Opening Ceremony & Plenary Session Publication Volumes Receptions Registration Fees, Hours Society & Division Officers Social Events Student Papers Tax Deductibility Session Titles by Session Block Detailed Session Listing Tutorials OPENING CEREMONY AND PLENARY SESSION
“Shaping Technology In The Pressure Vessel Industry”
The Conference opens on Monday, July 21, at 10:30 AM in Grand Ballroom A. Local dignitaries and representatives of the American Society of Mechanical Engineers will welcome the attendees. First plenary address will be delivered by Paskel (Pat) J. Berry and John H. Birdwell, Jr., both of LMC properties, Inc., Lockheed Martin Corporation, Baltimore MD. Their topic is titled ” Lockheed Martin , A Perspective on People, Processes and Technology”. Plenary Speakers
Paskel (Pat) J. Berry John H. Birdwell, Jr. Corporate Vice President Asset Sr. Manager Management LMC Properties, Inc. LMC Properties, Inc. Lockheed Martin Corporation Lockheed Martin Corporation Baltimore, MD Baltimore, MD
“Lockheed Martin , A Perspective on People, Processes and Technology”
Pat Berry has over twenty-five years of direct line management experience in a variety of defense, aerospace and commercial metalcraft, electronics, and test operations. His experience includes Program Management, Procurement, Manufacturing, Marketing and Finance. Pat also has experience in restructuring/rebuilding and expanding business base for small to medium size companies.
John H. Birdwell, Jr. is a Senior Manager with Lockheed Martin's corporate subsidiary LMC Properties Inc. A Masters Graduate of Texas A&M University, his broad experience includes twenty- seven years of domestic and international experience in operations management/multi-engineering disciplines within the commercial and defense sectors. He presently manages LMC Properties, Inc. Industrial Participation activities in support of the Corporations Business Units foreign sales.
The second address titled “Are There Polymers in Your Future?” will be delivered by Professor Frank N. Kelley, Dean of the College of Polymer Science at the University of Akron, Akron, OH. Plenary Speaker
Dr. Frank N. Kelley Dean, College of Polymer Science Polymer Engineering Professor of Polymer Science The University of Akron, Akron, OH
“Are There Polymers in Your Future?”
Dr. Frank N. Kelley was born in Akron, OH. He attended the University of Akron where he earned a B.S. in Chemistry, an M.S. and Ph.D. (1961) in Polymer Chemistry. He has worked at Goodyear Tire & Rubber Company and then the Institute of Polymer Science while attending the University. Following graduation, he was employed by the Union Carbide Corporation. After serving his country in the United States Air Force, where he was assigned to the Air Force Rocket Propulsion Laboratory Edwards AFB, California.
Upon completion of his military tour, Frank Kelley continued at Air Force Rocket Propulsion Laboratory Edwards AFB then transferred to Wright-Patterson AFB as Chief Scientist and Directory of the Laboratory. Just prior to being named Dean of the newly formed College of Polymer Science, Dr. Frank Kelley was the Director of the Institute of Polymer Science.
HONORS AND AWARDS LUNCHEON
The ASME PVP Division Honors and Awards Luncheon, honoring all ASME and the Division Award recipients will be held on Wednesday, July 23, from 12:30 pm in the Grand Ballroom A where Dr. Fumio Hara will receive the 2003 ASME Pressure Vessels and Piping (PVP) Medal.
PVP Medal Recipient
Professor Fumio Hara Fumio Hara was born in Japan in April 7th, 1941. He graduated the University of Tokyo in March 1965, majored mechanical engineering (Bachelor of Engineering) and obtained Master’s Degree of Engineering in 1967 and Doctor’s Degree of Engineering in 1970 from the University of Tokyo. In 1970 April, he joined Institute of Industrial Science, The University of Tokyo, as Lecturer. He then joined Department of Mechanical Engineering, Tokyo University of Science, as Associate Professor and was promoted to Full Professor in 1983. Since then he has been working for education and research in the university. From 1998 April to 2001 December, he served as Director of Frontier Research Center for Computational Sciences, and also to 2002 September, he was Dean of Engineering School. In 2002, he served as Director of Education-Research Organization of Information Science and Technology, Tokyo University of Science. From 2003 January to present, he is Executive Director of Tokyo University of Science. During the period from 1975 to 1976, he was Guest Research Fellow of University of Karlsruhe, Germany, as Scholarship Recipient of the Humboldt Foundation.
He has published over 330 journal papers and proceedings papers with peer reviews in scientific and technical transactions in the fields of mechanical vibrations and controls, seismic analysis and design of piping systems and equipments, safety analysis of industrial facilities, robotics, and human machine interfaces. He has published also 14 books by single or with co-authors.
His major professional activities are as follows: 1989 July ASME/JSME PVP Conference Program Co-chair, 1991 April-1993 March, JSME Director of International Affairs Board, 1993 April-1995 March, JSME Executive Board Governor, 1995 July, ASME/JSME PVP Conference Co-chair, 1996 July - 1999 June, ASME Journal of Pressure Vessels Technology Associate Editor, 1998 April - 1999 March, JSME Executive Board Governor, 1999 April to 2002 March, Editor-in-Chief of JSME International Journal, 2002 April to 2003 March, Vice President of the Japan Society of Mechanical Engineers (JSME).
He has received numerous awards from the professional societies including JSME, ASME, SICE and RSJ. He is ASME Fellow and JSME Fellow.
Professor Fumio Hara has developed and chaired many technical sessions in the PVP Divisional Conferences and co-edited several ASME Special Publications in Flow-Induced Vibration. In addition, Professor Hara was the Co-chairman of the Joint ASME/JSME PVP Conferences in 1989 and again in 1995. From 1996 to 1999, he was an Associate Editor of the Journal of Pressure Vessel Technology. Professor Hara has received numerous certificates of appreciation from the PVP Division, including one for Outstanding Technical Session in the 1995 PVP Conference.
TUTORIALS
The objectives of the Tutorial Program include updating experienced engineers and introducing engineers into specific areas of technology through overview courses. Admission to the tutorials is free for Conference Registrants. The tutorial notes for the Technical Tutorials may be purchased for U.S. $30.00 each at the tutorial sessions. The coupon given in the Registration package cannot be used for tutorial notes.
SPECIAL TUTORIAL
Sunday, July 20 (4:00 pm – 6:00 pm) Ambassador DESIGN/ENGINEERING ASSESSMENT AND REGULATORY REQUIREMENTS FOR DESIGN DOCUMENTS by Oscar Shirani
Engineering audits of safety related systems and components are common place in power and process industries. This tutorial will cover the development of regulatory requirements of the U.S. Code of Federal Regulations and the ASME / ANSI standards as they relate to the nuclear industry. The tutorial will also discuss the approach used to meet these requirements and, in particular, it will provide guidance on how engineering / design documents / technical specifications should be packaged to meet these requirements. While the nuclear industry is used in the tutorial development, the guidance provided in the tutorial can be applied in any industry.
TECHNICAL TUTORIALS
Monday, July 21 (2:00 pm – 5:45 pm) Ambassador AN OVERVIEW OF ASME B31.3, THE PROCESS PIPING CODE by Charles Becht IV
The objective of this tutorial is to provide an overview of ASME B31.3, the Process Piping Code, its organization, scope, and application. The tutorial covers requirements for materials, design, fabrication, assembly, erection, examination, inspection, and testing of process piping. It provides an overview of the rules for normal and Category D Fluid Service Metallic Piping. It is designed to familiarize the participant with the general scope and organization, as well as providing some historical background information and discussion of intent, to better enable the student to understand the code rules.
Tuesday, July 22 (8:30 am – 12:15 am) Ambassador DO’S AND DON’TS IN USING ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS FOR DESIGN BY SECTION III AND SECTION VIII RULES by Arturs Kalnins and Wolf Reinhardt
The tutorial is aimed at designers who encounter cases in their work that are difficult to handle by the design- by-rules approach and who are willing to take the step toward design-by-analysis using FEA. The objective is to show the complete process that starts from the design specification and ends with the gross dimensions of a design that satisfies the requirements of Sections III and VIII for static loading. The focus will be on the application of elastic-plastic FEA to the design process. Examples will be included that are solved by the two major finite element programs, Abaqus and Ansys. It will be shown what to do and what not to do; what elements to use and what specific elements not to use; what pitfalls to avoid when modeling the geometry, loading, and boundary conditions.
Wednesday, July 23 (8:30 am – 12:15 am) Ambassador THE ASME HPS SECTION 6000 “HAZARDOUS RELEASE PROTECTION”: PROTECTION WORKING WITH PERFORMANCE TO SET A STANDARD FOR RISK BASED SAFETY OF PRESSURE SYSTEMS by Sam Brown
The ASME HPS Standard Section 6000 is intended to provide the user of this standard with requirements for evaluating hazards and the required protection (mitigation) from failure associated with applicable pressure systems.
This tutorial starts with a brief examination of the history and motivating issues for the development of the ASME HPS Section 6000 and its relationship to Sections 1000 to 5000. This tutorial reviews the seven parts of the ASME HPS Standard Section 6000 with respect to their underlying philosophy and intent, in addition some examples are discussed that illustrate the importance of ASME HPS Section6000. The seven parts of Section 6000 are: • Introduction to Hazardous Release Protection (Organization and Use) • Hazards Identification and Analysis • Estimating Magnitude of Hazardous Release • Performance Criteria for Personnel, Secondary, and Protective Systems • Siting Risk Classification, • Protective (Mitigation) Systems • Protective Systems Documentation
Thursday, July 24 (8:30 am – 12:15 am) Ambassador RISK-BASED MAINTENANCE AND INTEGRITY MANAGEMENT by John A. Farquharson and Randal L. Montgomery
This tutorial will discuss the concept of using risk and reliability management techniques to optimize a facility’s maintenance activities. Risk and reliability assessment techniques have been used for over four decades, primarily by unique high-risk industries where safety and reliability are paramount. This tutorial will discuss specific topics that describe practical uses of risk and reliability technologies to assist companies in mainline industries in managing their maintenance operations. Numerous examples will be presented on how companies have lowered maintenance costs and improved reliability through use of these techniques.
The topics covered will be: (1) Basic risk and reliability concepts, (2) Critical asset identification using streamlined risk profiles, (3) Techniques for identifying important failures of critical assets and determining appropriate proactive maintenance strategies needed to , and (4) Importance of maintenance management systems in managing risk. This tutorial provides a basic understanding of risk and reliability needed by facility personnel to understand and apply risk-based decision tools and techniques to maintenance activities.
NDE AND SOFTWARE FORUMS
NDE Demonstration Forum Gold Assembly The NDE Demonstration Forum will be held on Monday, July 21 2003, NDE Vendors will have the opportunity to present and discuss their capabilities, equipment, and services in the Gold Assembly (Mezzanine Level foyer) adjacent to the Conference Registration area. For additional information, please contact Dr. Carl E. Jaske, CC Technologies at [email protected]. Coffee and refreshments will be available in the exhibit area.
Software Demonstration Forum Gold Assembly The Software Demonstration Forum will be held on Tuesday, July 22, 2003. Software Vendors will have the opportunity to present and discuss their capabilities. Equipment, and services will be in the Gold Assembly (Mezzanine Level foyer), adjacent to the Conference Registration area. For additional Information, please contact Jim Cory, EDS PLM Solutions, [email protected]. Coffee and refreshments will be available in the exhibit area.
Coffee Breaks and Refreshments Coffee and refreshments are available throughout the week in the Gold Ballroom foyer. This hub of activity features the forums, coffee breaks, guest activity information area, and registration.
SOCIAL PROGRAMS AND TOURS Conference Kickoff Event Sunday, July 20 (6:30 – 7:30p) Ambassador
Conference-Wide Reception Monday, July 21 (6:30p – 8:00p) Gold Room All who registered are invited to attend the Reception. Meet with your colleagues, many of whom you have not seen since last summer’s conference. Join with the registrants and guests for a relaxing evening. No charge for registered conference participants and guests. Cleveland City Tour Monday, July 21 (9:00a – 12:00p) Explore this “Great Lake’s city on America’s North Coast and discover one of the nation’s best kept secrets! Travel along Lake Erie’s picturesque shoreline through a portion of the lush ‘Emerald Necklace’ of parklands surrounding the city enroute to the university Circle, the heart and mind of Cleveland and the nation’s largest concentration of cultural, educational, and medical facilities.
See the world renowned Cleveland Museum of Art, the Western Reserve Historical Society – Crawford Auto/Aviation Complex, Severance Hall, winter home of the Cleveland Orchestra, The Cleveland Museum of Natural History and the Garden Center of Greater Cleveland, the oldest civic garden center in America.
Visit the monument honoring President James A. Garfield in historic Lake View Cemetery, and be sure to bring your camera to capture the spectacular views of the North Coast. Here, also, is the Wade Memorial Chapel with its breathtaking Tiffany window and mosaic tiles. Time permitting we’ll include Shaker Heights, one of the wealthiest suburbs in America, where you will learn the fascinating story of the Shaker sect whose customs and ingenuity enrich our heritage.
No city tour is complete without a visit to the ‘Flats’, the land along the mighty winding Cuyahoga River, where once-abandoned warehouses and factories have been ingeniously transformed into quality restaurants, nightclubs, and specialty shops in what is now the nightlife capital of the Midwest! We’d be remiss if we did not show you the Gateway, the state of the art sports complex which is home to Jacobs Field and Gund Arena and of course the newest additions to our Cleveland waterfront, the Rock and Roll Hall of fame, the Great Lakes Science Center and the Cleveland Browns Stadium.
Fee: Adult @ $25 / Child under 16 @ $15
Cleveland…Culture with a Capital “C” Tuesday, July 22 (9:00a - 3:30p)
This tour will acquaint you with Cleveland’s cultural community as well as highlight the outstanding works of art that enhance our public spaces. The creative vision of I. M. Pei, Philip Johnson and Caesar Pelli has changed our skyline and the stellar works of Nogucchi, McVey and Oldenberg add beauty to our streetscapes. We’d be remiss of we did not include University Circle and the new Gehry building, and a visit to one of our world- renowned museums.
Our tour will make a stop at the Cleveland Botanical Garden and the incredible new Eleanor Armstrong Smith Glasshouse. This conservatory re-creates two of the world’s most fragile ecosystems; the spiny desert of Madagascar and the cloud forest of Costa Rica. These two breathtaking distinct ecosystems are too wondrous for words. You will be immersed into the sites and sounds of these exotic environments.
Lunch at your choice of the area’s fine restaurants (not included in tour fee).
For the afternoon you may return to the hotel or visit one or many museums including the world renown Cleveland Museum of Art, the Cleveland Museum of Natural History or the Western Reserve Historical Society, whose extensive complex includes the Crawford Auto/Aviation wing with its 200 vintage autos and planes; the Chishlom Halle costume wing with more than 30,000 items to choose from for special exhibits or its Hay Mansion where grand parlors and lavishly furnished rooms depict the lifestyle of the residents of Millionaires Row.
Circlelink transportation shuttles from all museums every 15 minutes. Return motor coach transportation from the Cleveland Art Museum will be at 3:00p.m.
Fee: Adult @ $30 / Child under 16 @ $20
Conference Special Event Life in the 1840’s – Hale Farm and Village Wednesday, July 22 (5:00p – 10:00p) Travel by motor coach a few miles and 153 years back to Hale Farm & Village in the Cuyahoga National Recreation Area. Explore life in Ohio’s Western Reserve region, the area settled by colonists who left Connecticut to live in “Connecticut’s Western Reserve.”
Observe the actions and experience the wit of the blacksmith as he plies the age-old art of metal forming. Visit the Glass Works where artisans describe the techniques for glass making and demonstrate their skill. At dinner, enjoy Widow Sophronia Hadley and her guest as she regales you with her wealth of gossip about the times and village residents. Savor the melodies of Stephen Foster and other musicians of the era by the Hale Village musicians as the strum their banjo and mandolin. Perhaps yo might be invited to sing along or join them in a lively jig.
Fee: Adult @ $50 / Child under 16 @ $40
The Amish Way Thursday, July 23 (9:30a – 3:30p) A short drive east of Cleveland through the gentle Ohio countryside takes visitors to a world apart from the urban scene. Geauga County is home to one of the nation’s largest settlements of Old Order Amish, a religious sect whose customs and traditions are deeply rooted in the past.
Step-back in time during this unique day of discovery and learn the fascinating story of these ‘plain people.’ The day includes visits to many of the skilled artisans who create a myriad of hand crafted treasures. Take time to shop for ‘treasures’ handcrafted by the skilled artisans of the Amish country. Beautiful Ohio quilts, hickory rockers, darling hand-made dolls, wooden toys, mouth-watering produce and baked goods abound. A visit to the End of the Commons store where the Amish community regularly purchases their staples is an unusual experience. Inasmuch as this is not a commercial tour each one varies.
The hospitality of an Amish home is extended to you as you feast upon the ‘home cookin’ for which they are famous.
Our guide for the day, a former college professor, has lived and worked among the Amish for twenty years. His stories and knowledge of the culture will provide insight into the world of these gentle people.
Don’t miss this opportunity found in few places of America…a mind-expanding, heart-warming experience!
Fee: Adult @ $52 / Child under 16 @ $42
Badge required for all events Please wear your badge for admission to all Conference activities. Your badge also provides a helpful introduction to other Conference attendees..
CONFERENCE INFORMATION
Technical Sessions and Programs All technical sessions will be held at the Renaissance Cleveland Hotel at three levels. Each room will be equipped with an overhead projector and an LCD projector that can be connected to a personal computer for electronic presentation (e.g. Microsoft PowerPoint). However, ASME will provide neither personal computer, 35mm Slide projector, nor VCR. A personal computer is the responsibility of the presenter. The location of the session rooms is shown in the Hotel Floor Plan located in the back of this program.
Student Paper Competition Tuesday, July 22 (8:30 am – 10:15 am, 10:30 am – 12:15 pm, and 2:00 pm – 3:45 pm) Severance Three sessions of the student paper competition conducted by the PVPD Senate take place on Tuesday, July 22. Dr. A. G. (Jack) Ware, the PVPD Senate President, will conduct these sessions. Upper-class and graduate students will have the opportunity to participate in a competition to select the outstanding student paper. The presentations will be judged on the basis of paper content and presentation. The winners will be announced at the Honors and Awards Luncheon on Wednesday, July 23.
Technical Committee Meetings Monday – Tuesday, July 21 – 22 (12:15 – 1:45 pm) The Pressure Vessels and Piping Division Technical Committees will meet during the noon hour on Monday, July 21, and Tuesday, July 22. Visitors are encouraged to attend and take an active part in PVP committee activities. All committee meetings, schedules, and rooms are listed on Page 10 of this book.
Honors and Awards Luncheon Wednesday, July 23 (12:30 – 2:15 pm) Grand Ballroom A The Division Honors Luncheon, honoring all Division Award Recipients and the 2003 PVP Medallist, Dr. Fumio Hara will be held on Wednesday, July 23, from 12:30 pm until approximately 2:15 pm in the Grand Ballroom A on the Mezzanine Level. One ticket is included in the Full Conference registration fee. Additional tickets may be purchased at the Conference Registration desk.
Authors Briefing Monday – Thursday, July 21 – 24 (7:30 am – 8:15 am) Grand Ballroom A Authors, Panelists, Developers, Session Chairs, and Session Vice-Chairs are requested to attend a breakfast briefing in the Grand Ballroom A (Mezzanine Level) on Monday through Thursday, at 7:30 am on the morning of their session. Session protocol will be discussed and the participants will have the opportunity to become better acquainted before their scheduled sessions.
Audio-Visual Practice Room Monday – Thursday, July 21 – 24 (7:30 am – 5:00 pm) Owens An overhead projector, an LCD projector, and a screen will be set up from 7:30 am – 5:00 pm , Monday through Thursday for author’s practice in Owens room, on the Conference Level (Fourth Floor).
Registration Hours
The ASME registration desk will be open during the following hours to provide advance registrants with their materials, to process on site registrations, and to provide conference information.
Sunday July 20 3:00pm-6:00pm Monday July 21 7:30am-4:00pm Tuesday July 22 7:30am-4:00pm Wednesday July 23 7:30am-Noon Thursday July 24 7:30am-Noon
On-Site Registration Fees
For those not registered in advance, the on-site registration fees (in U.S. dollars) are:
*Full **One Day Member MBR1 $455 MBR2 $325 Coop. Soc. Member*** CSC1 $455 CSC2 $325 Session Chair CHM1 $455 CHM2 $325 Session Vice Chair CHV1 $455 CHV2 $325 Author/Panelist AUP1 $455 AUP2 $325 Non-Member NMB1 $570 NMB2 $460 ASME Life Member Retired LMRD $50 ASME Student Member STNT N/C Student Non-Member STNM $50 Guest/Spouse SPOS N/C
* Full registration fee includes a coupon for one PVP volume of your choice and on ticket for the Honors Luncheon. ** These registration categories do not include the coupon toward a PVP volume or a ticket for the Honors Luncheon.
*** To qualify for discounted registration fees, you must be a member of ASME or one of the cooperating societies listed in this program. Fill in your society affiliation and membership number on the registration form.
Cooperating Societies
If you are a member of one of the following "cooperating societies," you may register at the ASME member rate: AlChE, AIME, ASCE, ASME-Albania, CAI-Argentina, IEAust-Australia, BSE-Bahrain. IE-Bangladesh, BAN-Belarus, BSMEE-Belgium, ABCM-Brazil., CSME-Canada. CMES-P.R. China, CSME-Taipei. ACIEM- Colombia, CMEA-Cyprus, CMES-Czech Republic, IDA-Denmark, ESME-Egypt, AFM-France, ISF-France, GAES-Republic of Georgia, VDI-Germany, GhIE-Ghana, HAMEE-Greece, HKIE-Hong Kong, GTE-Hungary, IE-India, IME-India, IE-Indonesia, IE-Ireland, SMEI-Israel, ASMECCANICA-Italy, UIT-Italy, JSME-Japan, KSME-South Korea., AMIME-Mexico, KIN1-The Netherlands, IPENZ-New Zealand, NSF-Norway, PSME- Philippines., SIMP-Poland, OE-Portugal, RSME-Romania, RAN-Russia, IE-Singapore, SMES-Slovak, ZSITS- Slovenia., SAIMechE-South Africa, FAIIE-Spain, SM-R-Sweden, TMMOB-Turkey, USME/UAN-Ukraine, IE- United Kingdom, ImechE-United Kingdom, CIV-Venezuela, SMEITJ-Yugoslavia.
Conference Publications George Bush, Mezzanine Level Papers presented at the 2003 ASME PVP Conference are published in bound volumes available at the Conference. Information on paper titles and authors are included in the final program. All registering for the entire conference (i.e., Full Registration) will receive a coupon redeemable for any of the PVP Conference publications. A complete set of the 2003 ASME PVP Conference publications may be purchased as a package at a 10% discount. You may also ship your conference volumes to your home or office directly from the Publication Sales. A shipping booth will be set up for your convenience so you do not have to carry your books home. Ship Your Conference Proceedings
You can ship your conference proceedings to your home or office right from the Conference. A shipping booth will be set up for your convenience so you do not have to carry your books home. Bring your books and we will package, and ship everything for you. Inquire at the Publication Sales room for location and fees.
Disabled Registrants
Whenever possible, arrangements will be made for disabled registrants, if advance notice is given. Indicate any needs on the registration form or contact Marisa Scalice, ASME International, Three Park Avenue, New York, NY 10016-5990. Phone/Fax. 212-591-7057/7856.
Tax Deductibility
Expenses of attending professional meetings have been held to be tax deductible as ordinary business expenses for U.S. citizens. Because of changes in the tax code, the current level of deduction is subject to change. Guest/Family Programs Guest and family members of registrants may participate in the Guest Programs that include the Jazz Band (Sunday), Conference-Wide Reception (Monday), Cleveland City Tour (Monday), Cleveland…Cultural with a Capital “C” (Tuesday), Hale Farm & Village (Wednesday evening), The Amish Way tour (Thursday), and a daily (Monday – Thursday) Continental Breakfast in the Shuckers Lounge. A guest program activities packet is also included. Please indicate how many guests you are brining on your registration form, so the necessary accommodations can be arranged.
Please note that some of these social programs have an associated fee for participants as shown below. Early registration is strongly recommended for the events that require fees as they are on a first-come first-serve basis.
Publishing Conference Papers in The ASME Journal of Pressure Vessel Technology
Technical papers presented at the 2003 PVP Conference are published in the ASME special publications (as shown on page 11) in the form of the ASME Conference Proceedings. Publication of papers in the special publications does not preclude authors from publishing their papers in ASME archival journals, such as the ASME Journal of Pressure Vessels Technology (JPVT) which is the technical voice of the Pressure Vessels and Piping Division.
Authors are encouraged to submit their papers to the Journal of Pressure Vessels Technology. Manuscripts should be prepared according to the JPVT guidelines, which can be found at the ASME web site (http://ojps.aip.org/ASMEJournals/PressureVesselTech).
Sam Y. Zamrik, Editor Journal of Pressure Vessel Technology 212 Earth & Engineering Sciences Building Pennsylvania State University University Park, PA 16802-1401 Ph/Fax: 814-865-5241/5241 e-mail: [email protected] PVP-2003 COMMITTEE MEETINGS
Date/Time Meeting Room Responsible Person Saturday, July 19, 2003 8:00 AM - 5:00 PM PSD Executive Committee Meeting Willey E. Seiders
Sunday, July 20, 2003 8:00 AM - 10:00 AM HPS Subcommittee on Hazards Carnegie G. Moino 8:30 AM - 1:30 PM PVPD Executive Committee Rockefeller H.H. Chung 10:00 AM - 1:00 PM HPS Executive Committee Carnegie G. Moino 1:00 PM - 5:00 PM HPS Standards Committee Carnegie G. Moino
Monday, July 21, 2003 8:30 AM - 12:00 PM TG Design (SWG-HPV/SC VIII) Carnegie P. Reddington 8:30 AM - 12:00 PM TG Edit/GR (SWG-HPV/SC VIII) Brush P. Reddington 12:15 PM - 1:45 PM PVPD Codes & Standards Technical Committee Blossom M. Rana 12:15 PM - 1:45 PM PVPD Design & Analysis Technical Committee Carnegie D. K. Williams 12:15 PM - 1:45 PM PVPD Fluid-Structure Interaction Technical Committee Stouffer W. L. Cheng 12:15 PM - 1:45 PM PVPD Operations, Applications, & Components Technical Rockefeller L. I. Ezekoye Committee 2:00 PM - 5:30 PM TG Edit/GR (SWG-HPV/SC VIII) Brush P. Reddington 2:00 PM - 5:30 PM TG Design (SWG-HPV/SC VIII) Carnegie P. Reddington 2:00 PM - 5:30 PM TG Materials & FE (SWG-HPV/SC VIII) Rockefeller P. Reddington 2:00 PM - 5:45 PM Materials & Structures Group Blossom D. Bray
Tuesday, July 22, 2003 8:30 AM - 10:15 AM PVPD International Coordinators Committee Rockefeller L. H. Geraets 8:30 AM - 12:00 PM SWG-HPV (SC VIII) Blossom P. Reddington 10:30 AM - 12:15 PM ICPVT Carnegie G. E. O. Widera / G. L. Hollinger 12:15 PM - 1:45 PM PVPD High Pressure Technology Technical Committee Blossom L. Antalfy 12:15 PM - 1:45 PM PVPD Materials & Fabrication Technical Committee Carnegie S. Rahman 12:15 PM - 1:45 PM PVPD Computer Technology Technical Committee Rockefeller D. R. Metzger 12:15 PM - 1:45 PM PVPD Seismic Engineering Technical Committee Stouffer K. Suzuki 12:15 PM - 1:45 PM NDE Executive Committee Willey W. T. Springer 2:00 PM - 3:45 PM PVP04 Program Committee Carnegie I. T. Kisisel 2:00 PM - 3:45 PM PVPD Publications Committee Rockefeller J. A. Todd 4:00 PM - 5:45 PM PVP05 Program Committee Carnegie M. K. Au-Yang 4:00 PM - 5:45 PM PVPD Senate Rockefeller A. G. Ware
Wednesday, July 23, 2003 8:30 AM - 10:15 AM Journal of Pressure Vessel Technology (JPVT) Editors Carnegie S. Y. Zamrik 8:30 AM - 10:00 AM PVPD Honors and Awards Committee Stouffer M. K. Au-Yang 8:30 AM - 10:15 AM PVPD IMECE03 Program Committee Blossom J. Cory 10:30 AM - 12:15 PM PVPD Professional Development Committee Stouffer I. T. Kisisel 10:30 AM - 12:15 PM PVPD IMECE04 Program Committee Blossom A. Dermenjian 2:45 PM - 4:00 PM PVP04 Training – Chairs, TPRs, Developers, Officers, Ambassador A. G. Ware Authors, and Members
Thursday, July 24, 2003 12:15 PM - 1:45 PM PVPD General Committee Stouffer W. J. Bees 10:00 AM - 2:00 PM TG EP-FEA (SWG-DA ) Brush D. P. Jones 2:00 PM - 3:45 PM PVPD Executive Committee Stouffer W. J. Bees 4:00 PM - 5:45 PM PVPD Conference Evaluation Ambassador J. Cory Publication Volumes Papers presented at the 2003 PVP Conference will be published in bound volumes as listed below. These publications, other books of interest, Codes and Standards, Transactions, Journals and free literature regarding all ASME publications will be available in the George Bush room, located on the Mezzanine Level (Third Floor). During the Conference, all publications will be sold at the ASME member price. Prepaid orders will be taken for publications that are not available at the Conference. All Conference registrants will receive a coupon for any one of the volumes. A complete set of the volumes covering the 2003 PVP Conference publications may be purchased as a package at a 10% discount. ASME accepts payment in cash ($US), checks ($US), travelers’ checks ($US), VISA, MasterCard, American Express, Diners Club, and Discover (all credit card charges in $US). Technical papers and bound volumes may be ordered after the Conference by contacting the ASME Order Department, 22 Law Drive, P. O. Box 2300, Fairfield, NJ 07007-2300 or by calling 1-800-THE-ASME. Payment by check or credit card (VISA, MasterCard, American Express, Diners Club, and Discover) must accompany your order. California, Georgia, Illinois, and Texas purchasers must add the appropriate sales tax or furnish a tax exemption certificate. Foreign and Canadian checks are not accepted. You may also ship your Conference volumes home or to your office right from the Publication Sales. A shipping booth will be set up for your convenience so you do not have to carry your books home. The Publication Sales area will be open during the following hours: Sunday, July 20 3:00 p.m. - 6:00 p.m. Monday, July 21 8:00 a.m. - 4:00 p.m. Tuesday, July 22 8:00 a.m. - 4:00 p.m. Wednesday, July 23 8:00 a.m. - 4:00 p.m. Thursday, July 24 8:00 a.m. - 12:00 p.m.
PVP Vol. No. Volume Title and Volume Editor(s) PVP-Vol. 453 Pressure Vessels and Piping Codes and Standards – 2003 edited by G. S. Chakrabarti PVP-Vol. 454 Problems Involving Thermal-Hydraulics, Liquid Sloshing, and Extreme Loads on Structures edited by F. J. Moody PVP-Vol. 455 High Pressure Technology 2003: Shaping High Pressure Technology for the Future edited by D. T. Peters PVP-Vol. 456 Ultrasonic Nondestructive Evaluation for Material Science and Industries edited by C. Miyasaka PVP-Vol. 457 Analysis of Bolted Joints – 2003 edited by A-H Bouzid PVP-Vol. 458 Computer Technology and Applications edited by W. D. Reinhardt and J. Martin PVP-Vol. 459 Design and Analysis Methods and Fitness-For-Service Evaluations for Pressure Vessels and Components edited by M. B. Ruggles-Wrenn PVP-Vol. 460 Emerging Technology in Fluids, Structures, and Fluid-Structure Interactions – 2003 edited by W. Cheng and S. Itoh PVP-Vol. 461 Fatigue, Fracture and Damage Analysis edited by D. Moinereau PVP-Vol. 462 Application of Fracture Mechanics in Failure Assessment edited by P-S Lam PVP-Vol 463 Flaw Evaluation, Service Experience and Reliability edited by P-S Lam PVP-Vol. 464 Residual Stress, Fitness-For-Service, and Manufacturing Processes edited by F. W. Brust PVP-Vol. 465 Flow-Induced Vibration- 2003 edited by M. J. Pettigrew PVP-Vol. 466 Seismic Engineering 2003 edited by J. C. Chen PVP-Vol. 467 Transportation, Storage, and Disposal of Radioactive Materials edited by R. S. Hafner PVP-Vol. 468 Aging Management and Component Analysis edited by V. Shah PVP-Vol. 469 Design and Analysis of Pressure Vessels and Piping: Implementation of ASME B31, Fatigue, ASME Section Vlll, and Buckling Analyses edited by D. K. Williams PVP Division Committees: PVP Vol. No. Book No. Volume and Contributing Editors Codes and Standards PVP-Vol. 453 G01188 G. S. Chakrabarti, A. Kalnins, D. P. Jones, Y. Hari, M. D. Rana, B. T. Lubin, A. Garbolevsky, and K. R. Rao Computer Technology PVP-Vol. 457 G01192 A. Bouzid and T. Sawa PVP-Vol. 458 G01193 W. Reinhardt and J. Martin Design & Analysis PVP-Vol. 459 G01194 M. B. Ruggles-Wrenn, W. J. Koves, D. H. Martens, and C. Becht IV PVP-Vol. 461 G01196 D. Moinereau, K. K. Yoon and J.-B. Choi PVP-Vol. 469 G01204 D. K. Williams, J. F. McCabe, K. K. Yoon, and D. Moinereau Fluid-Structure Interaction PVP-Vol. 454 G01189 F. J. Moody, J. C. Jo, D. Brochard, C. Minowa, D. C. Ma, H. S. Levine, S. E. Jones, M. L. Hughes and D. S. Preece PVP-Vol. 460 G01195 W. Cheng, S. Itoh, M. Souli, M. Fischer, and A. E. Holdø PVP-Vol. 465 G01200 M. J. Pettigrew, J. Antunes, M. K. Au-Yang, F. Eisinger, M. W. Mureithi, T. Nakamura, S. J. Price, B. A. W. Smith, and D. S. Weaver High Pressure Technology PVP-Vol. 455 G01190 D. T. Peters, T. Kovach and J. G. Keltjens Materials & Fabrication PVP-Vol. 462 G01197 P. S. Lam, D. P. G. Lidbury, D. A. Scarth, and Y.-Y. Wang PVP-Vol 463 G01198 P. S. Lam, C. Faidy, R. L. Sindelar, W. H. Bamford, and D. K. Rodgers PVP-Vol. 464 G01199 F. W. Brust, E. Keim, A. Duncan, P. Dong, A. K. Motarjemi, and S. A. Timashev Operations, Applications, and Components PVP-Vol. 467 G01202 R. S. Hafner, R. B. Rebak, S. J. Hensel, A. C. Smith, and M. E. Wangler PVP-Vol. 468 01203 V. Shah, G. Bezdikian, M. H. Sanwarwalla, L. I. Ezekoye, K. L. McElhaney, and B. O. Al-Bedoor Seismic Engineering PVP Vol. 466 G01201 J. C. Chen, J. Fujita, S. C. Lu, S. Fujita, M. E. Nitzel, Q. Hossain, K. Suzuki, K. Ishida, and C. S. Tsai NDE Division PVP Vol. 456 G01191 C. Miyasaki Student Papers Included in PVP 464 (MF) A. G. Ware American Society of Mechanical Engineers PVP-2004 CALL FOR PAPERS 2004 ASME PRESSURE VESSELS AND PIPING DIVISION CONFERENCE Hyatt Regency La Jolla at Aventine San Diego, California July 25 – 29, 2004 “Innovative PVP Technologies: Meeting Emerging Challenges Now” PVP- 2004 - Join us in La Jolla, San Diego, California, for the 2004 ASME Pressure Vessels and Piping Conference! More than 150 paper and panel sessions are planned, as well as tutorials, NDE and Software demonstrations, and the Student Paper Competition. The PVP Conference is a great place to present your ideas and to meet colleagues as we work to create and advance PVP technologies in addressing present and emerging challenges in our industry. The ASME Pressure Vessels and Piping Division will sponsor this Conference with co-sponsorship of the Japanese Society of Mechanical Engineers (JSME) and with participation by the ASME NDE Division. This CALL FOR PAPERS provides guidance for submitting abstracts for proposed technical papers for the 2004 ASME PVP Conference based on general topics. Specific Calls for Papers are available from the Technical Committees or on the ASME PVPD web sites at www.asme.org/events/pvp04 and/or http://www.asme.org/divisions/pvp/. GENERAL TOPICS: (1) Codes and Standards, (2) Computer Technology, (3) Design & Analysis, (4) Fluid-Structure Interaction, (5) High Pressure Technology, (6) Materials & Fabrication, (7) Operations, Applications, & Components, (8) Seismic Engineering, (9) Nondestructive Examination, and (10) Student Paper Competition. SCHEDULE: Abstracts are due by September 30, 2003. Authors will be notified of abstract acceptance by October 15, 2003. Draft papers are due by November 30, 2003. Paper peer review comments will be returned by January 31, 2004. Final papers in ASME format for publication must be received by March 1, 2004. All accepted papers will be published in Conference Volumes. CONFERENCE INFORMATION: Updated Conference and paper publication instructions and information are available on the Internet at the ASME PVPD web sites at http://www.asme.org/events/pvp04/ c ABSTRACT SUBMITTAL: Mail, fax, or email a 200-word abstract and the contact author’s complete affiliation, address, telephone and fax numbers, and e-mail address for each proposed paper to both of the following by September 30, 2003:
Conference General Chair Conference Technical Program Chair
I. T. Kisisel M. K. Au-Yang Sargent & Lundy LLC 3531 Round Hill Road 55 East Monroe Street Lynchburg, VA 24503-3225 Chicago, IL 60603-5780 Ph/Fax: 434-384-9741 / 9742 Ph/Fax: 312-269-6776 / 9661 e-mail: [email protected] e-mail: [email protected] SESSION TITLES BY SESSION BLOCK
Refer to the Hotel Floor Plan in the back of this booklet for room locations. The parenthetical designations are the Technical Committee session references. SUNDAY, July 20
Block 0.4: Sunday, July 20 (4:00 PM - 6:00 PM)
0.4A (TUT- 00) TUTORIAL: DESIGN/ENGINEERING ASSESSMENT AND REGULATORY REQUIREMENTS FOR DESIGN DOCUMENTS MONDAY, July 21
Block 1.1: Monday, July 21 (8:30 AM - 10:15 AM)
1.1B (CS- 01A) PLASTIC ANALYSIS IN PRESSURE VESSEL DESIGN - I 1.1C (CT- 03) Non-Linear FEA and Emerging Methods 1.1D (OAC- 01A) AGING MANAGEMENT AND LICENSE RENEWAL - I 1.1E (OAC- 02A) COMPONENT ANALYSIS AND EVALUATION - I 1.1F (DA- 02A) FITNESS FOR SERVICE, LIFE EXTENTION, REMEDIATION AND REPAIR 1.1J (SE- 01) SEISMIC TESTING AND ANALYSIS VERIFICATION - I 1.1L (MF- 01A) APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT - I 1.1N (FSI- 02A) SYMPOSIUM ON FLOW-INDUCED VIBRATION: FLUIDELASTIC INSTABILITY OF TUBE ARRAYS IN CROSS-FLOW 1.1O (FSI- 01A) ADVANCES IN FLUID-STRUCTURE INTERACTION IN PLANT DESIGN - I 1.1P NDE DEMONSTRATION FORUM - I
Block 1.2: Monday, July 21 (10:30 AM - 12:15 PM)
SESSION 1.2Q PVP- 2003 CONFERENCE OPENING AND PLENARY SESSION
Block 1.3: Monday, July 21 (2:00 PM - 3:45 PM) 1.3A (TUT- 01A) TUTORIAL: AN OVERVIEW OF ASME B31.3, THE PROCESS PIPING CODE - I 1.3B (CS- 01B) PLASTIC ANALYSIS IN PRESSURE VESSEL DESIGN - II 1.3C (CT- 04A) ANALYSIS OF BOLTED JOINT - I 1.3D (OAC- 01B) AGING MANAGEMENT AND LICENSE RENEWAL - II 1.3E (OAC- 02B) COMPONENT ANALYSIS AND EVALUATION - II 1.3F (DA- 02B, MF-16) FITNESS FOR SERVICE AND LIFE MANAGEMENT 1.3G (DA- 04A) FRACTURE TOUGHNESS 1.3J (SE- 02) SEISMIC TESTING AND ANALYSIS VERIFICATION - II 1.3K (NDE- 01) ULTRASONIC NDE - I 1.3L (MF- 01B) APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT - II 1.3M (FSI- 03A) THERMAL- HYDRAULIC PROBLEMS: ANTICIPATING, MITIGATING, OR AVOIDING THEM IN VESSELS, PIPING, AND COMPONENTS - I 1.3N (FSI- 02B) SYMPOSIUM ON FLOW-INDUCED VIBRATION: VIBRATION OF CYLINDERS IN CROSS-FLOW 1.3O (FSI- 01C) ADVANCES IN FLUID DYNAMICS - I 1.3P NDE DEMONSTRATION FORUM – II
Block 1.4: Monday, July 21 (4:00 PM - 5:45 PM)
1.4A (TUT- 01B) TUTORIAL: AN OVERVIEW OF ASME B31.3, THE PROCESS PIPING CODE - II 1.4B (CS- 03) STRUCTURAL INTEGRITY OF PRESSURE COMPONENTS 1.4C (CT- 01A, CS- 09) EFFICIENT COMPUTATIONAL MODELS FOR ELASTIC-PLASTIC AND LIMIT LOAD ANALYSIS OF PRESSURE VESSEL COMPONENTS - I 1.4D (OAC- 01C) AGING MANAGEMENT AND LICENSE RENEWAL - III 1.4E (OAC- 04A, CT- 06) RISK AND RELIABILITY TOPICS - I 1.4F (DA- 01A) DESIGN AND ANALYSIS OF PIPING COMPONENTS - I 1.4G (DA- 04B) PTS ANALYSES 1.4J (SE-11) SEISMIC STRUCTURES /SYSTEMS RESPONSE AND INTERACTION 1.4K (NDE- 02) ULTRASONIC NDE - II 1.4L (MF- 01C) APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT - III 1.4M (FSI- 03B) THERMAL- HYDRAULIC PROBLEMS: ANTICIPATING, MITIGATING, OR AVOIDING THEM IN VESSELS, PIPING, AND COMPONENTS - II 1.4N (FSI- 02C) SYMPOSIUM ON FLOW-INDUCED VIBRATION: STEAM GENERATOR VIBRATION - PRACTICAL ASPECTS 1.4O (FSI- 01D) ADVANCES IN FLUID DYNAMICS - II 1.4P NDE DEMONSTRATION FORUM - III TUESDAY, July 22
Block 2.1: Tuesday, July 22 (8:30 AM - 10:15 AM)
2.1A (TUT- 02A) TUTORIAL: DO’S AND DON’TS IN USING ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS FOR DESIGN BY SECTION III AND SECTION VIII RULES - I 2.1B (CS- 04A) PANEL SESSION: WHAT’S NEW IN CODES AND STANDARDS - I 2.1C (CT- 04B) ANALYSIS OF BOLTED JOINT - II 2.1D (OAC- 01D) AGING MANAGEMENT AND LICENSE RENEWAL - IV
2.1E (OAC- 03A) TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - I: INTRODUCTION 2.1F (STU- 01) 11th STUDENT PAPER COMPETITION - I 2.1J (SE- 03) SEISMIC, SHOCK, AND VIBRATION ISOLATION 2.1K (NDE- 03) ULTRASONIC NDE - III 2.1L (MF- 01D) APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT - IV 2.1M (MF- 02A) OPTIMIZATION OF MANUFACTURING PROCESSES FOR METALLIC BASED COMPONENTS I 2.1N (FSI- 02D) SYMPOSIUM ON FLOW-INDUCED VIBRATION: IMPACT/FRETTING WEAR 2.1O (FSI- 01E) ADVANCES IN DAMAGE, FRACTURE, AND STRUCTURAL DYNAMICS - I
2.1P SOFTWARE DEMONSTRATION FORUM - I
Block 2.2: Tuesday, July 22 (10:30 AM - 12:15 PM)
2.2A (TUT- 02B) TUTORIAL: DO’S AND DON’TS IN USING ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS FOR DESIGN BY SECTION III AND SECTION VIII RULES - II 2.2B (CS- 04B) PANEL SESSION: WHAT’S NEW IN CODES AND STANDARDS – II 2.2C (CT- 04C) ANALYSIS OF BOLTED JOINT - III 2.2D (OAC- 01E) AGING MANAGEMENT AND LICENSE RENEWAL - V
2.2E (OAC- 03B) TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - II: GAS GENERATION ISSUES 2.2F (STU- 02) 11th STUDENT PAPER COMPETITION - II 2.2J (SE- 06) TECHNOLOGIES FOR SEISMIC MITIGATION 2.2K (NDE- 04) SCANNING ACOUSTIC MICROSCOPY 2.2L (MF- 01E) APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT - V 2.2M (MF- 02B) OPTIMIZATION OF MANUFACTURING PROCESSES FOR METALLIC BASED COMPONENTS - II 2.2N (FSI- 02E) SYMPOSIUM ON FLOW-INDUCED VIBRATION: VIBRATION OF PWR FUEL AND PIPING 2.2O (FSI- 01F) ADVANCES IN DAMAGE, FRACTURE, AND STRUCTURAL DYNAMICS - II 2.2P SOFTWARE DEMONSTRATION FORUM - II
Block 2.3: Tuesday, July 22 (2:00 PM - 3:45 PM)
2.3B (CS- 02A, MF- 09) ENVIRONMENTAL FATIGUE ISSUES IN THE ASME B&PV CODE - I 2.3C (CT- 01B, CS-10) EFFICIENT COMPUTATIONAL MODELS FOR ELASTIC-PLASTIC AND LIMIT LOAD ANALYSIS OF PRESSURE VESSEL COMPONENTS - II 2.3D (OAC- 01F) AGING MANAGEMENT AND LICENSE RENEWAL - VI 2.3E (DA- 03A) DESIGN AND ANALYSIS OF VESSELS AND COMPONENTS - I 2.3F (STU- 03) 11th STUDENT PAPER COMPETITION - III 2.3G (DA- 04C) STRESS INTENSITY FACTORS 2.3K (HPT- 01) ADVANCED APPLICATIONS IN HIGH PRESSURE TECHNOLOGY 2.3L (MF- 01F) APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT - VI 2.3M (MF- 03) SERVICE EXPERIENCE IN OPERATING NUCLEAR PLANTS 2.3N (FSI- 02F) SYMPOSIUM ON FLOW-INDUCED VIBRATION: VIBRATION AND ACOUSTICS IN PIPING SYSTEMS 2.3O (FSI- 01G) FLUID-STRUCTURE COUPLING ANALYSIS - I 2.3P SOFTWARE DEMONSTRATION FORUM - III
Block 2.4: Tuesday, July 22 (4:00 PM - 5:45 PM)
2.4B (CS- 02B, MF-10) ENVIRONMENTAL FATIGUE ISSUES IN THE ASME B&PV CODE - II 2.4C (CT- 04D) ANALYSIS OF BOLTED JOINT - IV 2.4E (DA- 03B) DESIGN AND ANALYSIS OF VESSELS AND COMPONENTS - II 2.4F (OAC- 04B, CT- 07) RISK AND RELIABILITY TOPICS - II 2.4G (DA- 04D) FRACTURE ANALYSIS - I 2.4J (SE- 04) SEISMIC EVALUATION OF SYSTEMS, STRUCTURES, AND COMPONENTS - I 2.4K (HPT- 02) NEW DEVELOPMENTS IN HIGH PRESSURE ANALYSIS 2.4L (MF- 07B) PANEL SESSION: PRESSURIZED THERMAL SHOCK 2.4M (MS- 01) PANEL SESSION: M&S OPPORTUNITIES IN HYDROGEN AS A FUEL 2.4N (FSI- 02G) SYMPOSIUM ON FLOW-INDUCED VIBRATION: SELECTED TOPICS IN FLUID-STRUCTURE INTERACTION 2.4O (FSI- 01H) FLUID-STRUCTURE COUPLING ANALYSIS - II 2.4P SOFTWARE DEMONSTRATION FORUM – IV
WEDNESDAY, July 23
Block 3.1: Wednesday, July 23 (8:30 AM - 10:15 AM)
3.1A (TUT- 03A) TUTORIAL: THE ASME HPS SECTION 6000 “HAZARDOUS RELEASE PROTECTION”: PROTECTION WORKING WITH PERFORMANCE TO SET A STANDARD FOR RISK BASED SAFETY OF PRESSURE SYSTEMS – I 3.1B (CS- 02C, MF-11) ENVIRONMENTAL FATIGUE ISSUES IN THE ASME B&PV CODE - III 3.1C (CT- 04E) ANALYSIS OF BOLTED JOINT - V 3.1D (OAC- 04C, CT- 08) PANEL SESSION: RISK BASED VS DETERMINISTIC APPROACH 3.1E (OAC- 03C) TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - III: CORROSION ISSUES 3.1F (DA- 01B) DESIGN AND ANALYSIS OF PIPING COMPONENTS - II 3.1G (DA- 04E) FRACTURE ANALYSIS - II 3.1J (SE- 05) SEISMIC EVALUATION OF SYSTEMS, STRUCTURES, AND COMPONENTS - II 3.1L (MF- 06A) FLAW EVALUATION PROCEDURES - I 3.1M (MF- 04A) WELDING AND RESIDUAL STRESS - I 3.1O (FSI- 01I) NEW APPLICATIONS OF SHOCK PROCESSING - I
Block 3.2: Wednesday, July 23 (10:30 AM - 12:15 PM)
3.2A (TUT- 03B) TUTORIAL: THE ASME HPS SECTION 6000 “HAZARDOUS RELEASE PROTECTION”: PROTECTION WORKING WITH PERFORMANCE TO SET A STANDARD FOR RISK BASED SAFETY OF PRESSURE SYSTEMS - II 3.2B (CS- 02D, MF-12) PANEL SESSION: ENVIRONMENTAL FATIGUE ISSUES IN THE ASME B&PV CODE 3.2C (CT- 04F) PANEL SESSION: CURRENT FUGITIVE EMISSIONS AND FLANGE DESIGN DEVELOPMENTS 3.2D (OAC- 02C) MAINTENANCE AND MACHINERY HEALTH MONITORING
3.2E (OAC- 03D) TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - IV: STRUCTURAL ISSUES
3.2F (DA- 07) PANEL SESSION: GENERATION IV NUCLEAR REACTORS — MATERIALS AND STRUCTURES CHALLENGES FOR PRESSURE VESSELS AND PIPING SESSION 3.2G (DA- 04F) FATIGUE ASSESSMENT FOR DESIGN 3.2J (SE- 07) DEVELOPMENT OF ADVANCED CONSTITUTIVE MODELS AND NUMERICAL CALCULATION PROCEDURES IN SEISMIC ENGINEERING - I SESSION 3.2L (MF- 06B) FLAW EVALUATION PROCEDURES - II 3.2M (MF- 04B) WELDING AND RESIDUAL STRESS - II 3.2O (FSI- 01J) NEW APPLICATIONS OF SHOCK PROCESSING - II
Block 3.3: Wednesday, July 23 (2:30 PM - 4:15 PM)
3.3A PVP04 TRAINING - CHAIRS, TPRS, DEVELOPERS, OFFICERS AUTHORS, AND MEMBERS THURSDAY, July 24
Block 4.1: Thursday, July 24 (8:30 AM - 10:15 AM)
4.1A (TUT- 04A) TUTORIAL: RISK-BASED MAINTENANCE AND INTEGRITY MANAGEMENT - I 4.1B (CS- 06A) PANEL SESSION: CURRENT AND ONGOING PERSPECTIVES OF ASME BOILER AND PRESSURE VESSEL CODES 4.1C (CT- 01C) FINITE ELEMENT METHODOLOGY FOR MANUFACTURING SIMULATIONS AND FIELD APPLICATIONS 4.1D (MF- 07A) RELIABILITY OF DEGRADING PROCESSING AND STORAGE STRUCTURES 4.1E (OAC- 03E) TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - V: THERMAL ISSUES - I 4.1F (DA- 04G) FATIGUE ANALYSIS METHODS 4.1J (SE-12) PANEL SESSION: PERFORMANE BASED SEISMIC DESIGN OF EQUIPMENT AND COMPONENTS 4.1K (HPT- 03) PANEL SESSION: THE RULES SHAPING THE HIGH PRESSURE INDUSTRY: WHERE WE ARE AND WHERE WE ARE GOING 4.1L (MF- 06C) FLAW EVALUATION PROCEDURES - III 4.1N (FSI- 05) FLUID STRUCTURE INTERACTION AND SLOSHING 4.1O (FSI- 01B) ADVANCES IN FLUID-STRUCTURE INTERACTION IN PLANT DESIGN – II
Block 4.2: Thursday, July 24 (10:30 AM - 12:15 PM)
4.2A (TUT- 04B) TUTORIAL: RISK-BASED MAINTENANCE AND INTEGRITY MANAGEMENT - II 4.2B (CS- 06B) PANEL SESSION: CURRENT AND ONGOING PERSPECTIVES OF ASME CODE SECTION XI 4.2C (CT- 02A, MF-13) NEW AND EMERGING COMPUTATIONAL METHODS - I 4.2E (OAC- 03F) TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - VI: THERMAL ISSUES II 4.2F (DA- 05) DESIGN AND ANALYSIS FOR ELEVATED TEMPERATURES 4.2J (SE- 08) DEVELOPMENT OF ADVANCED CONSTITUTIVE MODELS AND NUMERICAL CALCULATION PROCEDURES IN SEISMIC ENGINEERING - II 4.2K (HPT- 04) ADVANCEMENT IN HIGH PRESSURE FAILURE PROTECTION DEVICES, ANALYSIS AND FORENSICS 4.2L (MF- 05A) RESIDUAL STRESS AND FITNESS FOR SERVICE 4.2N (FSI- 06A) STRUCTURES UNDER EXTREME LOADING CONDITIONS- PENETRATION AND BLAST LOADING 4.2O (FSI- 01K) ADVANCES IN EXPLOSIVE-STRUCTURE INTERACTIONS
Block 4.3: Thursday, July 24 (2:00 PM - 3:45 PM)
4.3B (CS- 05A) PANEL SESSION: AN OVERVIEW OF THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE (97/23/EC) 4.3C (CT- 02B, MF-14) NEW AND EMERGING COMPUTATIONAL METHODS - II 4.3E (OAC- 03G) TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - VII: OPERATIONAL ISSUES 4.3F (DA- 06) STRESS CLASSIFICATION ISSUES IN THE ANALYSIS OF PRESSURE VESSELS 4.3J (SE- 09, FSI- 08) SEISMIC RESPONSES OF LIQUID STORAGE TANKS - I 4.3K (HPT- 05) FATIGUE SESSION 4.3L (MF- 05B) FITTNESS FOR SERVICE ON PIPELINES 4.3N (FSI- 06B) STRUCTURES UNDER EXTREME LOADING CONDITIONS - AIR BLAST LOADINGS ON BUILDINGS AND BUILDING COMPONENTS 4.3O (CS- 07) PANEL SESSION: POST 9-11 SECURITY ISSUES
Block 4.4: Thursday, July 24 (4:00 PM - 5:45 PM)
4.4B (CS- 05B) PANEL SESSION: THE PED COMPLIANT SULCIS BOILER 4.4C (CT- 02C, MF-15) NEW AND EMERGING COMPUTATIONAL METHODS - III 4.4J (SE-10, FSI- 09) SEISMIC RESPONSES OF LIQUID STORAGE TANKS - II DAILY SESSION AND PAPER LISTING
SUNDAY, July 20
Block 0.4: Sunday, July 20 (4:00 PM - 6:00 PM)
SESSION 0.4A (TUT- 00)
Sunday, July 20, 4:00 PM - 6:00 PM,
TUTORIAL: DESIGN/ENGINEERING ASSESSMENT AND REGULATORY REQUIREMENTS FOR DESIGN DOCUMENTS
Sponsored by: The PVP Division Conference Committee
Presented by: O. Shirani, Quality Assurance Consultants, Inc. (Mt. Prospect, IL USA)
MONDAY, July 21
Block 1.1: Monday, July 21 (8:30 AM - 10:15 AM)
SESSION 1.1B (CS- 01A)
Monday, July 21, 8:30 AM - 10:15 AM,
PLASTIC ANALYSIS IN PRESSURE VESSEL DESIGN - I
Sponsored by: Codes and Standards Committee
Published in PVP Vol. 453, PRESSURE VESSELS AND PIPING CODES AND STANDARDS - 2003
Developed by: A. Kalnins, Lehigh University (Bethlehem, PA USA)
Chair: A. Kalnins, Lehigh University (Bethlehem, PA USA)
Vice Chair: M. Sakane, Ritsumeikan University (Shiga, JAPAN) EFFECTS OF PEAK STRAIN ON COLLAPSE LOAD ASSESSMENT A. Okamoto, Energy Systems Division, IHI (Yokohama, JAPAN); Y. Ohtake, Research Laboratory, IHI (Yokohama, JAPAN); I. Nishiguchi, Kanagawa Institute of Technology (Atsugi, JAPAN); and M. Aoki, Tokyo Electric Power Company (Yokohama, JAPAN)
DESIGN CRITERION OF FATIGUE ANALYSIS ON PLASTIC BASIS BY ASME B&PV CODE A. Kalnins, Lehigh University (Bethlehem, PA USA); N. E. Dowling, Virginia Polytechnic Institute and State University (Blacksburg, VA USA)
STRAIGHT PIPE CYCLIC ANALYSES FOR SHAKEDOWN VERIFICATION CODE CRITERIA T. Bhagwagar and R. Gurdal, Framatome-ANP (Lynchburg, VA USA)
SESSION 1.1C (CT- 03)
Monday, July 21, 8:30 AM - 10:15 AM,
NON-LINEAR FEA AND EMERGING METHODS
Sponsored by: PVP Computer Technology
Published in PVP Vol. 458, COMPUTER TECHNOLOGY AND APPLICATIONS
Developed by: N. Badie, Atomic Energy of Canada (Toronto, Ontario CANADA); G. Morandin, and R. Sauvé, Atomic Energy of Canada (Toronto, Ontario CANADA)
Chair: J. Martin, Lockheed Martin (Albany, NY USA)
Vice Chair: Y. Urthaler, Texas A&M University (College Station, TX USA)
FAILURE MODE OF PIPES CONTAINING CIRCUMFERENTIAL CRACKS UNDER BENDING AND ITS CONSEQUENCE ON THE APPLICATION OF NSCM CRITERION P. P. Milella, APAT (Rome, ITALY); N. Bonora and D. Gentile, University of Cassino (Cassino, ITALY)
GENERALIZED APPLICATION OF PERIODIC SYMMETRY IN MOLECULAR SIMULATIONS L. Pan, D. R. Metzger, and M. Niewczas, McMaster University (Hamilton, Ontario CANADA)
PERIODIC SYMMETRY FOR EXPLICIT METHODS FOR LARGE DEFORMATION TWISTING AND STRETCHING D. R. Metzger, McMaster University (Hamilton, Ontario CANADA) ON A PROPOSED NEW KINEMATIC ASSUMPTION FOR ANALYSIS OF LAMINATED, FIBER-REINFORCED COMPOSITE SHELLS S. Steinbrink, Gannon University (Erie, PA USA)
SESSION 1.1D (OAC- 01A)
Monday, July 21, 8:30 AM - 10:15 AM,
AGING MANAGEMENT AND LICENSE RENEWAL - I
Sponsored by: Operations, Applications and Components Committee
Published in PVP Vol. 468, AGING MANAGEMENT AND COMPONENT ANALYSIS
Developed by: V. N. Shah, Argonne National Laboratory (Argonne, IL USA); M. H. Sanwarwalla, Sargent & Lundy LLC (Chicago, IL USA); G. Bezdikian, EDF Pole Industrie (Saint Denis, FRANCE)
Chair: S. Coffin US NRC (Washington DC, USA)
Vice Chair: J.D. Keller Continuum Dynamics Inc. (Ewing, NJ USA)
FRENCH PROCEDURE FOR AGEING MANAGEMENT PROGRAM OF SAFETY COMPONENTS C. Faidy, EDF- SEPTEN (Villeurbanne, FRANCE)
DEVELOPMENT OF PREDICTION EQUATIONS ON CHARPY SHELF ENERGY FOR JAPANESE RPV STEELS K. Sakamoto and T. Osaki, Japan Power Engineering and Inspection Corp. (Chiba-ken, JAPAN); T. Hirota, Mitsubishi Heavy Industries, LTD. (Kobe, JAPAN); M. Tomimatsu, Mitsubishi Heavy Industries, LTD (Hyogo, JAPAN)
NEUTRON EMBRITTLEMENT AGING MANAGEMENT OF NUCLEAR REACTOR PRESSURE VESSELS W. L. Server, ATI Consulting (Pinehurst, NC USA)
FRENCH RPV PTS ASSESSMENT - AN OVERVIEW OF EDF RESEACH AND DEVELOPMENT IN PROGRESS ON THERMALHYDRAULICS, MATERIALS AND MECHANICAL ASPECTS D. Moinereau and J. M. Frund, EDF (Moret sur loing, FRANCE); H. C. Bossennec, EDF (Villeurbanne, FRANCE); G. Bezdikian, EDF (Saint Denis, FRANCE); A. Martin, EDF(Chatou, FRANCE) SESSION 1.1E (OAC- 02A)
Monday, July 21, 8:30 AM - 10:15 AM,
COMPONENT ANALYSIS AND EVALUATION - I
Sponsored by: Operations, Applications & Components Committee
Published in PVP Vol. 468, AGING MANAGEMENT AND COMPONENT ANALYSIS
Developed by: L. Ike Ezekoye, Westinghouse (Pittsburgh, PA USA); K. L. McElhaney, Oak Ridge National Laboratory (Oak Ridge, TN USA)
Chair: L. Ike Ezekoye, Westinghouse (Pittsburgh, PA USA)
Vice Chair: K. L. McElhaney, Oak Ridge National Laboratory (Oak Ridge, TN USA)
THE SENSITIVITY OF COUNTER-WEIGHTED SWING CHECK VALVE PERFORMANCE TO COUNTER-WEIGHT LOCATION L. I. Ezekoye, Westinghouse Electric Company (Pittsburgh, PA USA)
FITNESS-FOR-SERVICE OF PRESSURE RELIEVING SYSTEMS W. E. Short, II, Pressure Systems Engineering Inc. (Newark, Delaware USA)
AN INVESTIGATION ON MECHANICAL ENERGY SUPPLY IN ROTATING FLOW PASSAGE OF CENTRIFUGAL PUMP T. Tanaka, Department of Mechanical Engineering, Kobe University (Rokko, Nada JAPAN)
SESSION 1.1F (DA- 02A)
Monday, July 21, 8:30 AM - 10:15 AM,
FITNESS FOR SERVICE, LIFE EXTENTION, REMEDIATION AND REPAIR
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 459, DESIGN AND ANALYSIS METHODS AND FITNESS FOR SERVICE EVALUATIONS FOR PRESSURE VESSELS AND COMPONENTS
Developed by: C. Rodery, BP (Alvin, TX USA); W. J. Koves, UOP LLC (Des Plaines, IL USA)
Chair: C. Rodery, BP (Alvin, TX USA)
Vice Chair: W. J. Koves, UOP LLC (Des Plaines, IL USA) CORROSION FATIGUE FAILURE ANALYSIS AND LIFE PREDICTION F. V. Ellis and S. Tordonato, Tordonato Energy Consultants, Inc. (Clifton, VA USA)
TENSILE PROPERTIES OF BOILER MATERIALS FOR FAD BASED FAILURE ANALYSIS F. V. Ellis, Tordonato Energy Consultants, Inc. (Chatanooga, TN USA)
LIMIT LOAD CONCEPTS IN FITNESS FOR PURPOSE ASSESSMENT OF FLAT ENDCAPS D. L. Marriott, Stress Engineering Services, Inc. (Mason, OH USA)
SIMPLIFIED J-INTEGRAL EVALUATION METHOD FOR EVALUATION OF REACTOR PRESSURE VESSEL IN THE UPPER-SHELF REGION Y. Urabe, S. Asada, and T. Hirota, Mitsubishi Heavy Industries, Ltd. (Kobe, JAPAN); M. Nakano, Kansai Electric Power Co., Inc. (Osaka, JAPAN); R. Maeda, Kyushu Electric Power Co., Inc. (Fukuoka, JAPAN)
FITNESS-FOR-SERVICE AND REMAINING USEFUL LIFE ASSESSMENT OF A STEAM DRUM R. K. Yee, San Jose State University (San Jose, CA USA)
SESSION 1.1J (SE- 01)
Monday July 21, 2003, 8:30 AM - 10:15 AM,
SEISMIC TESTING AND ANALYSIS VERIFICATION - I
Sponsored by: The Seismic Engineering Committee
Published in PVP Vol. 466, SEISMIC ENGINEERING - 2003
Developed by: S. Fujita, Tokyo Denki University (Tokyo, JAPAN); K. Suzuki, Tokyo Metropolitan University (Tokyo, JAPAN)
Chair: K. Suzuki, Tokyo Metropolitan University (Tokyo, JAPAN)
Vice Chair: S. Fujita, Tokyo Denki University (Tokyo, JAPAN)
STUDY ON 3-D MEASUREMENT METHOD USING IMAGE PROCESSING TECHNIQUE FOR DYNAMIC DISPLACEMENT IN SHAKE TABLE TESTS S. Fujita, Tokyo Denki University (Tokyo, JAPAN); O. Furuya, Tokyo Metropolitan College of Technology (Tokyo, JAPAN); Y. Niitsu, Tokyo Denki University (Tokyo, JAPAN); T. Mikoshiba, National Research Institute for Disaster Prevention Research Division (Tsukuba, JAPAN); D. Nakano, Tokyo Denki University (Tokyo, JAPAN)
A STUDY ON DAMAGE DETECTION PROCEDURE FOR EXISTING PILES A. Sone and A. Masuda, Kyoto Institute of Technology (Kyoto, JAPAN); T. Koyama, Toshiba Corporation (Fuchu, JAPAN); K. Washida, Kyoto Institute of Technology (Kyoto, JAPAN); M.Yamada and S. Yamamoto, Waseda University (Tokyo, JAPAN)
SEISMIC PROVING TEST OF ERODED PIPING (STATUS OF ERODED PIPING COMPONENT AND SYSTEM TEST) Y. Namita, K. Suzuki, H. Abe, and I. Ichihashi, Nuclear Power Engineering Corporation (Tokyo, JAPAN); M. Shiratori, Yokohama National University (Kanagawa, JAPAN); K. Tai, Mitsubishi Heavy Industries, Ltd. (Hyogo, JAPAN); K. Iwata, Toshiba Corporation (Kanagawa, JAPAN); A. Nebu, Hitachi, Ltd. (Ibaraki, JAPAN)
SESSION 1.1L (MF- 01A)
Monday, July 21, 8:30 AM - 10:15 AM,
APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT - I
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 462, APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT
Developed by: D. P. G. Lidbury, Serco Assurance (Warrington, Cheshire UK); D. A. Scarth, Kinectrics, Inc. (Toronto, Ontario CANADA); P. S. Lam, Westinghouse Savannah River Co. (Aiken, SC USA); Y. Y. Wang, Engineering Mechanics Corp. of Columbus (Columbus, OH USA)
Chair: Y. Y. Wang, Engineering Mechanics Corp. of Columbus, (Columbus OH USA)
Vice Chair: P. S. Lam, Westinghouse Savannah River Company (Aiken, SC USA)
THE APPLICATION OF FRACTURE MECHANICS TO PREDICT THE CRITICAL INITIAL CRACK LENGTH FOR INSPECTION C. T. Liu, AFRL/PRSM (Edwards AFB CA USA)
COMPUTATIONAL MODELLING OF HIGH TEMPERATURE STEADY STATE CRACK GROWTH USING A DAMAGE-BASED APPROACH M. Yatomi, Noel P O’Dowd, and K. M. Nikbin, Department of Mechanical Engineering, Imperial College London (London, UK) THE TOUGHNESS-INDUCED CRACK DECELERATION MECHANISM ON ULTRA-HIGH PRESSURE STEEL GAS PIPELINES Z. Zhuang and X. You, Tsinghua University (Beijing, P.R. CHINA)
INFLUENCE OF THE YIELD-TO-TENSILE STRENGTH RATIO ON THE FAILURE ASSESSMENT OF CORRODED PIPELINES X.-K. Zhu and B. N. Leis, Battelle Memorial Institute (Columbus, Ohio USA)
SESSION 1.1N (FSI- 02A)
Monday, July 21, 8:30 AM - 10:15 AM,
SYMPOSIUM ON FLOW-INDUCED VIBRATION: FLUIDELASTIC INSTABILITY OF TUBE ARRAYS IN CROSS-FLOW
Sponsored by: The Fluid-Structure Interaction Committee
Published in PVP Vol. 465, FLOW-INDUCED VIBRATION-2003
Developed by: M. J. Pettigrew, École Polytechnique (Montréal, QC CANADA); S. J. Price, McGill University (Montréal, QC CANADA)
Chair: M. K. Au-Yang, Framatome Technology (Lynchburg, PA USA)
Vice Chair: M. A. Hassan, University of New Brunswick (Fredericton, NB CANADA)
FLUIDELASTIC INSTABILITY IN A TUBE ARRAY SUBJECTED TO UNIFORM AND JET FLOW P. Feenstra and D. S. Weaver, McMaster University (Montréal, QC CANADA); Z. Abdullah, Weyerhaeuser Technical Center (Federal Way, WA USA)
FLUIDELASTIC INSTABILITY OF U-BEND TUBE ARRAY BASED ON CORRELATED UNSTEADY FLUID FORCE IN TWO-PHASE FLOW T. Nakamura and K. Shimamura, Mitsubishi Heavy Industries Ltd. (JAPAN); T. Iwase and S. Nishida, Nuclear Power Engineering Corporation (JAPAN)
EFFECT OF RESPONSE SHAPE VERSUS MODE SHAPE ON PREDICTION OF FLUIDELASTIC INSTABILITY OF TUBES PARTIALLY EXPOSED TO CROSS FLOW - A BRIEF NOTE F. L. Eisinger, J. T. Francis, and R. E. Sullivan, Foster Wheeler Power Group, Inc. (Clinton, NJ USA) NEW EXPERIMENTAL DATA AND ANALYSIS FOR TWO-PHASE FLOW-INDUCED VIBRATION OF TUBE BUNDLES : PRELIMINARY RESULTS D. Mitra, V. K. Dhir, and I. Catton, University of California at Los Angeles (Los Angeles, CA USA)
SESSION 1.1O (FSI- 01A)
Monday, July 21, 8:30 AM - 10:15 AM,
ADVANCES IN FLUID-STRUCTURE INTERACTION IN PLANT DESIGN - I
Sponsored by: Fluid Structure Interaction Committee
Published in PVP Vol. 460, 7TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGIES IN FLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS - 2003
Developed by: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA); M. Fischer, Technical Consultant (München, GERMANY); A. E. Holdo, University of Hertfordshire (Herts, UK); S. Itoh, Kummamoto University (Kumamoto, JAPAN); M. Souli, Université de Lille (Lille, FRANCE)
Chair: M. Fischer, Technical Consultant (München, GERMANY)
Vice Chair: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA)
KEYNOTE: COUPLED FLUID-SOLID PROBLEMS: SURVEY ON NUMERICAL APPROACHES AND APPLICATIONS M. Schäfer, Darmstadt University of Technology (Darmstadt, GERMANY)
CONDENSATION WATER HAMMER CALCULATION AS BASIS FOR BETTER DESIGN W. Schnellhammer and T. Diesselhorst, Framatome ANP (Erlangen, GERMANY)
FLUID-STRUCTURE INTERACTION WITH S-TRAC AND KWUROHR DUE TO PRESSURE WAVES U. Neumann, Framatome ANP (Erlangen, GERMANY)
SESSION 1.1P
Monday, July 21, 8:30 AM - 10:15 AM, Gold Assembly:
NDE DEMONSTRATION FORUM - I Sponsored by: The PVP Division Conference Committee
Developed by: C. C. Jaske, CC Technologies Services, Inc. (Columbus, OH USA)
Participants:
Expansion Seal Technologies, Fritz Sutor, http://www.expansionseal.com CC Technologies Services, Inc., Carl E. Jaske, http://www.cctechnologies.com Don E. Bray, Inc., Donald E. Bray, http://www.brayengr.com Advanced Technology Corporation, Fahmay Haggag, http://www.atc-ssm.com R/D Tech, Michael Moles, http://www.rd-tech.com ABS Consulting, John A. Farquharson, http://www.abs-jbfa.com
Block 1.2: Monday, July 21 (10:30 AM - 12:15 PM)
SESSION 1.2Q
Monday, July 21, 10:30 AM - 12:15 PM,
PVP-2003 CONFERENCE OPENING AND PLENARY SESSION: SHAPING TECHNOLOGY IN THE PRESSURE VESSEL INDUSTRY
Sponsored by: PVP Division Conference Committee
Chair: W. J. Bees, Conference General Chair, BWX Technologies Inc. (Barberton, OH USA)
Vice Chair: I. T. Kisisel, Conference Technical Program Chair, Sargent & Lundy LLC (Chicago, IL USA)
WELCOME REMARKS
D. A. Canonico Vice President, Pressure Vessel Technology; Chair, Codes and Standards Group, ASME (New York, NY USA)
H. H. Chung Chair, Pressure Vessels & Piping Division, ASME (New York, NY USA)
LOCKHEED MARTIN , A PERSPECTIVE ON PEOPLE, PROCESSES AND TECHNOLOGY P. J. Berry, VP, Asset Management and J. H. Birdwell, Jr., Sr. Manager, Asset Management, LMC Properties, Inc. (Baltimore, MD USA) ARE THERE POLYMERS IN YOUR FUTURE? F. N. Kelley, Dean, College of Polymer Science, The University of Akron (Akron, OH USA)
Block 1.3: Monday, July 21 (2:00 PM - 3:45 PM)
SESSION 1.3A (TUT- 01A)
Monday, July 21, 2:00 PM - 3:45 PM, :
TUTORIAL: AN OVERVIEW OF ASME B31.3, THE PROCESS PIPING CODE - I
Sponsored by: The PVP Division Conference Committee
Presented by: C. Becht IV, Becht Engineering Company (Liberty Corner, NJ USA)
SESSION 1.3B (CS- 01B)
Monday, July 21, 2:00 PM - 3:45 PM, :
PLASTIC ANALYSIS IN PRESSURE VESSEL DESIGN - II
Sponsored by: Codes and Standards Committee
Published in PVP Vol. 453, PRESSURE VESSELS AND PIPING CODES AND STANDARDS - 2003
Developed by: A. Kalnins, Lehigh University (Bethlehem, PA USA)
Chair: A. Kalnins, Lehigh University (Bethlehem, PA USA)
Vice Chair: A. Okamoto, Energy Systems Division, IHI (Yokohama, JAPAN)
TENSION-TORSION MULTIAXIAL LOW CYCLE FATIGUE FOR SUS304 AND CR-MO-V STEELS M. Sakane, Ritsumeikan University (Shiga, JAPAN); T. Itoh, Fukui University (Fukui, JAPAN)
EQUI-BIAXIAL TENSION-COMPRESSION LOW CYCLE FATIGUE FOR TYPE 304 AND CR-MO-V CRUCIFORM SPECIMEN T. Itoh, Fukui University (Fukui, JAPAN); M. Sakane, Ritsumeikan University (Shiga, JAPAN) PIPING ELBOW CYCLIC ANALYSES FOR SHAKEDOWN VERIFICATION J. Yang and R. Gurdal, Framatome-ANP (Lynchburg, VA USA)
APPLICATION OF SHELL ELEMENTS TO COLLAPSE LOAD ANALYSIS S. Asada, Mitsubishi Heavy Industries Limited (Kobe, JAPAN); A. Okamoto, Energy Systems Division, IHI (Yokohama, JAPAN); I. Nishiguchi, Kanagawa Institute of Technology (Atsugi, JAPAN); and M. Aoki, Tokyo Electric Power Company (Yokohama, JAPAN)
SESSION 1.3C (CT- 04A)
Monday, July 21, 2:00 PM - 3:45 PM,
ANALYSIS OF BOLTED JOINT - I
Sponsored by: The Computer Technology Committee
Published in PVP Vol. 457, ANALYSIS OF BOLTED JOINTS - 2003
Developed by: A. Bouzid, Ecole de Technologie Superieure (Montreal, QC CANADA); T. Sawa, University of Yamanashi (Yamanashi, JAPAN); H. Kockelmann, University of Stuttgart (Stuttgart, GERMANY)
Chair: A. Bouzid, Ecole de Technologie Superieure (Montreal, QC CANADA)
Vice Chair: T. Sawa, University of Yamanashi (Yamanashi, JAPAN)
WHAT IS THE MEANING OF TIGHT? J. Bartonicek, GKN (Neckarwestheim, GERMANY); H. Kockelmann and E. Roos, MPA (Stuttgart, GERMANY); F. Schoeckle, AMTEC (Lauffen, GERMANY)
TIGHTENING SEQUENCE FOR BOLTED FLANGE JOINT ASSEMBLY S. Kumakura and K. Saitou, Kanagawa University (Kanagawa, JAPAN)
AN EXPERIMENTAL INVESTIGATION ON SELF-LOOSENING OF BOLTED JOINTS Y. Jiang and M. Zhang University of Nevada, (Reno, NV USA); T.-W. Park, Jeonju Technical College (Seoul, KOREA); C. H. Lee, Ford Motor Company, (Dearborn, MI USA)
METHODICAL GUIDELINE FOR BOLT-UP OPERATION OF PIPE FLANGE CONNECTIONS (A CASE USING SHEET GASKET AND SPIRAL WOUND GASKET) T. Takaki and T. Fukuoka, Kobe University of Mercantile Marine (Kobe, JAPAN)
SESSION 1.3D (OAC- 01B) Monday, July 21, 2:00 PM - 3:45 PM,
AGING MANAGEMENT AND LICENSE RENEWAL - II
Sponsored by: Operations, Applications and Components Committee
Published in PVP Vol. 468, AGING MANAGEMENT AND COMPONENT ANALYSIS
Developed by: V. N. Shah, Argonne National Laboratory (Argonne, IL USA); M. H. Sanwarwalla, Sargent & Lundy LLC (Chicago, IL USA), G. Bezdikian, EDF Pole Industrie (Saint Denis, FRANCE)
Chair: B. A. Erler, Sargent & Lundy LLC (Chicago, USA)
Vice Chair: V. N. Shah, Argonne National Laboratory (Argonne, IL USA)
FRENCH 4-LOOP PWR 1300 MW REACTOR PRESSURE VESSELS - FIRST RESULTS FOR INTEGRITY ASSESSMENT AND PLANT LIFE MANAGEMENTG. Bezdikian, EDF (Saint Denis, FRANCE); F. T. Morin and H. C. Bossennec, EDF (Villeurbanne, FRANCE); D. Moinereau, EDF (Moret sur loing, FRANCE); A. Martin, EDF (Chatou, FRANCE)
A LIFE EXTENSION PERSPECTIVE FOR A CANDU-6 NPP: GENTILLY-2 PLANT CONDITION ASSESSMENTS M. AUBRAY, HYDRO-QUÉBEC GENTILLY PLANT (QUÉBEC, CANADA)
INTEGRATED PLANT LIFE CYCLE MANAGEMENT - THE IAEA CONTRIBUTION K. S. Kang, C. R. Clark, and P. E. Yuhn, International Atomic Energy Agency (Vienna, AUSTRIA)
ASSET MANAGEMENT EVALUATION METHODS: THE EDF PERSPECTIVE FOR PWR NUCLEAR POWER PLANTS LIFE MANAGEMENT C. E. Bauby, V. E. Just, and C. Garreau, EDF (Chatou, FRANCE)
SESSION 1.3E (OAC- 02B)
Monday, July 21, 2:00 PM - 3:45 PM,
COMPONENT ANALYSIS AND EVALUATION - II
Sponsored by: Operations, Applications & Components Committee
Published in PVP Vol. 468, AGING MANAGEMENT AND COMPONENT ANALYSIS Developed by: L. Ike Ezekoye, Westinghouse (Pittsburgh, PA USA); K. L. McElhaney, Oak Ridge National Laboratory (Oak Ridge, TN USA)
Chair: K. L. McElhaney, Oak Ridge National Laboratory (Oak Ridge, TN USA)
Vice Chair: L. Ike Ezekoye, Westinghouse (Pittsburgh, PA USA)
THE EFFECT OF PIPING SYSTEM NON-LINEARITY ON THE UNSTABLE GROWTH OF A CIRCUMFERENTIAL THROUGH-WALL CRACK IN A PIPE E. Smith, Manchester University/UMIST Material Science Center (Manchester, UK)
TOFD AUTOMATIC ULTRASONIC TESTING FOR CONDITION MONITORING OF COKE DRUMS R. Owen and Jorge A. Penso, Petroleos de Venezuela (PDVSA), Centro de Refinación (Paraguana, VENEZUELA); M. Oka, Sumitomo Heavy Industries, Ltd. (Imazaike Toyo-City, Ehime JAPAN)
STUDY AND APPLICATION OF HEALTH MONITORING BY FIBER OPTIC SENSORS IN CIVIL ENGINEERING H.-N. Li, D.-S. Li , and S.-Y. Wang, School of Civil and Hydraulic Engineering, Dalian University of Technology (Dalian, CHINA)
SESSION 1.3F (DA- 02B, MF-16)
Monday, July 21, 2:00 PM - 3:45 PM,
FITNESS FOR SERVICE AND LIFE MANAGEMENT
Sponsored by: The Design and Analysis, and Materials and Fabrication Committees
Published in PVP Vol. 459, DESIGN AND ANALYSIS METHODS AND FITNESS FOR SERVICE EVALUATIONS FOR PRESSURE VESSELS AND COMPONENTS
Developed by: W. J. Koves, UOP LLC (Des Plaines, IL USA); M. J. Cohn, Aptech Engineering Services, Inc. (Sunnyvale, CA USA)
Chair: W. J. Koves, UOP LLC (Des Plaines, IL USA)
Vice-Chair: M. J. Cohn, Aptech Engineering Services, Inc. (Sunnyvale, CA USA)
COMPARISON OF A LIFE CONSUMPTION ANALYSIS TO SECTION III, SUBSECTION NH DESIGN RULES FOR A MAIN STEAM GIRTH WELD CREEP CRACK M. J. Cohn, Aptech Engineering Services, Inc. (Sunnyvale, CA USA) CASE STUDIES OF PULSED EDDY CURRENT TO MEASURE WALL LOSS IN FEEDWATER HEATER SHELLS M. J. Cohn, Aptech Engineering Services, Inc. (Sunnyvale, CA USA); J. W. Norton, Power Inspection Consultants, Inc. (Wadsworth, OH USA)
ANALYSIS OF NON-UNIFORMLY DEGRADED PIPE SECTIONS A. J. Smith and K. K. Dwivedy, Dominion Generation (Glen Allen, VA USA)
EXTERNAL WELD OVERLAYS FOR REPAIR OF PRESSURE COMPONENTS S. J. Findlan, EPRI (Charlotte, NC USA)
SESSION 1.3G (DA- 04A)
Monday, July 21, 2:00 PM - 3:45 PM,
FRACTURE TOUGHNESS
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 461, FATIGUE, FRACTURE AND DAMAGE ANALYSIS - 2003
Developed by: D. Moinereau, EDF (Cedex FRANCE); K. Yoon, Framatome, ANP (Lynchburg, VA USA); J.-B. Choi, Sungkyunkwan University (KOREA)
Chair: J.-B. Choi, Sungkyunkwan University (KOREA)
Vice Chair: Y. Wadier, EDF (Clamart FRANCE)
EVALUATION OF FRACTURE TOUGHNESS FROM INSTRUMENTED CHARPY IMPACT TESTS FOR A REACTOR PRESSURE VESSEL STEEL A. Parrot, EDF (Moret-sur-Loing, FRANCE); P. Forget, CEA (Gif-sur-Yvette, FRANCE); A. Dahl, EDF (Moret-sur-Loing, FRANCE)
QUASI-STATIC LOADING RATE EFFECT ON THE MASTER CURVE REFERENCE TEMPERATURE OF FERRITIC STEELS AND IMPLICATIONS B. Hall, Framatome ANP (Lynchburg, VA USA); K.K. Yoon, Framatome ANP (Lynchburg, VA USA)
EFFECT OF BOUNDARY CONDITIONS OF FAILURE PRESSURE MODELS ON RELIABILITY ESTIMATION OF BURIED PIPELINES O.S. Lee, J.SikPyun, and D. H. Kim, InHa University (Incheon KOREA)
SESSION 1.3J (SE- 02) Monday, July 21, 2:00 PM - 3:45 PM,
SEISMIC TESTING AND ANALYSIS VERIFICATION - II
Sponsored by: The Seismic Engineering Committee
Published in PVP Vol. 466, SEISMIC ENGINEERING - 2003
Developed by: K. Suzuki, Tokyo Metropolitan University (Tokyo, JAPAN); J. C. Chen Lawrence Livermore National Laboratory (Livermore, CA USA)
Chair: G. Slagis, G C Slagis Associates (Pleasant Hill, CA USA)
Vice Chair: K. Suzuki, Tokyo Metropolitan University (Tokyo, JAPAN)
SEISMIC PROVING TEST OF ULTIMATE PIPING STRENGTH (SIMULATION ANLYSIS OF SIMPLIFIED PIPING SYSTEM TEST) K. Suzuki, Y. Namita, H. Abe, and I. Ichihashi, Nuclear Power Engineering Corporation (Tokyo, JAPAN); K. Suzuki, Tokyo Metropolitan University (Hachioji, JAPAN); M. Ishiwata, Hitachi, Ltd., (Hitachi, JAPAN); T. Fujiwaka, Ishikawajima-Harima Heavy Industries, Ltd. (Yokohama, JAPAN); K. Tai, Mitsubishi Heavy Industries, Ltd. (Kobe, JAPAN)
SEISMIC BEHAVIOR OF INSULATED HOLLOW CAVITY WALLS USING QUASI-STATE EXPERIMENTATION H.-N. Li, J.-W. Zhang, and L. Liu, Dalian University of Technology (Dalian, P. R. CHINA)
SHAKING TABLE TESTS OF A FULL SCALE STEEL STRUCTURES ISOLATED WITH MFPS C. S. Tsai, T. C. Chiang, and B. J. Chen, Feng Chia University (Taichung, TAIWAN)
SESSION 1.3K (NDE- 01)
Monday, July 21, 2:00 PM - 3:45 PM,
ULTRASONIC NDE - I
Sponsored by: PVP NDE Division Committee
Published in PVP Vol. 456, ULTRASONIC NON-DESTRUCTIVE EVALUATION FOR MATERIALS SCIENCE AND INDUSTRIES
Developed by: C. Miyasaka, The Pennsylvania State University (University Park, PA USA) Chair: B. R. Tittmann, The Pennsylvania State University (University Park, PA USA)
Vice Chair: T. Hayashi, Nagoya Institute of Technology, (Nagoya, Japan)
ULTRASONIC FLEXURAL TORSIONAL GUIDED WAVE PIPE INSPECTION POTENTIAL Z. Sun, L. Zhang, B. Gavigan, and J. L. Rose, The Pennsylvania State University (University Park, PA USA); T. Hayashi, Nagoya Institute of Technology (Nagoya, JAPAN)
NDE OF PIPE INNER CORROSION WITH DELAYED ECHOES OF SV WAVE PROPAGATED CIRCUMFERENTIALLY IN LIQUID-FILLED PIPES H. Nagamizo, Mitsubishi Chemical Corporation (Yokkaichi, JAPAN); K. Kawashima, Nagoya Institute of Technology (Nagoya, JAPAN); J. Miyauchi, Mitsubishi Chemical Corporation (Kagawa, JAPAN)
PRESSURE VESSEL INSPECTIONS USING ULTRASONIC PHASED ARRAYS M. D. C. Moles, R/D Tech (Ontario, CANADA); N. Dubé, F. Jacques, R/D Tech (Québec CANADA)
MICRO-STRUCTURAL MONITORING OF 2.25CR-1MO STEEL BY SURFACE SH WAVE I.-K. Park, Seoul National University of Technology (Seoul, KOREA); Y.-H. Cho, Inje University, (Kimhae, KOREA)
NATURAL FOCUSING FOR THE DETECTION OF DEFECTS BEYOND ELBOWS J. L. Rose, The Pennsylvania State University (University Park, PA USA); M. J. Avioli, Jr. FBS Inc. (State College, PA USA); P. J. Mudge, Plant Integrity Ltd. (Cambridge, UK)
SESSION 1.3L (MF- 01B)
Monday, July 21, 2:00 PM - 3:45 PM,
APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT - II
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 462, APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT
Developed by: D. P. G. Lidbury, Serco Assurance (Warrington, Cheshire UK); D. A. Scarth, Kinectrics, Inc. (Toronto, Ontario CANADA); P. S. Lam, Westinghouse Savannah River Co. (Aiken, SC USA); Y. Y. Wang, Engineering Mechanics Corp. of Columbus (Columbus, OH USA)
Chair: Y. J. Chao, University of South Carolina (Columbia, SC USA) Vice Chair: P. S. Lam, Westinghouse Savannah River Company (Aiken, SC USA)
STATISTICAL AND CONSTRAINT LOSS SIZE EFFECTS ON CLEAVAGE FRACTURE – IMPLICATIONS TO MEASURING TOUGHNESS IN THE TRANSITION H. J. Rathbun, G. R. Odette, T. Yamamoto, M. Y. He and G. E. Lucas, University of California (Santa Barbara, CA USA)
CONSTRAINT QUANTIFICATION OF SINGLE EDGE NOTCHED BEND SPECIMENS UNDER LARGE-SCALE YIELDING Y.J. Chao, University of South Carolina (Columbia, SC USA); X.-K. Zhu, Battelle Memorial Institute (Columbus, OH USA); Yil Kim, University of South Carolina (Columbia, SC USA); M.J. Pechersky, M. J. Morgan, and P.-S. Lam, Westinghouse Savannah River Company (Aiken, SC USA)
INCREASED TEMPERATURE MARGINS DUE TO CONSTRAINT LOSS B. Bezensek and J.W. Hancock, University of Glasgow (Glasgow, UK)
SESSION 1.3M (FSI- 03A)
Monday, July 21, 2:00 PM - 3:45 PM,
THERMAL- HYDRAULIC PROBLEMS: ANTICIPATING, MITIGATING, OR AVOIDING THEM IN VESSELS, PIPING, AND COMPONENTS - I
Sponsored by: Fluid Structure Interaction Committee
Published in PVP Vol. 454, PROBLEMS INVOLVING THERMAL-HYDRAULICS, LIQUID SLOSHING, AND EXTREME LOADS ON STRUCTURES
Developed by: F. J. Moody, GE (Retired) (Murphys, CA USA); J. C. Jo, Korea Institute of Nuclear Safety (Taejon, KOREA)
Chair: F. J. Moody, GE (Retired) (Murphys, CA USA)
Vice Chair: J. C. Jo, Korea Institute of Nuclear Safety (Taejon, KOREA)
PUMP START TRANSIENTS IN CLOSED LOOP SYSTEM SOLVED WITH RESTRICTION ORIFICES D. A. Van Duyne and L. B. Semprucci, Altran Corporation (Boston, MA USA); and N. Jaycox, Dominion Nuclear (Connecticut, USA) ANALYSIS OF FLUID-ELASTIC INSTABILITY FOR KSNP STEAM GENERATOR TUBE AND ITS PLUGGING EFFECT AT CENTRAL REGION K. W. Ryu and B. H. Cho, Chonbuk National University (Jeonju, KOREA); C. Y. Park, Korea Electric Power Research Institute (KOREA); S. K. Park, Korea Atomic Energy Research Institute (KOREA)
FLOW-INDUCED VIBRATION CHARACTERISTICS OF PWR STEAM GENERATOR U- TUBES WITH DEFECT (PART 1: FLUIDELASTIC INSTABILITY CHARACTERISTICS) J. C. Jo, M. J. Jhung, W. S. Kim, and H. J. Kim, Korea Institute of Nuclear Safety (KOREA)
AN INTRODUCTION TO THE ASME HPS SECTION 6000 “HAZARDOUS RELEASE PROTECTION”: HISTORICAL DEVELOPMENT OF A MEANS TO REDUCE RISK FROM PRESSURE SYSTEMS FAILURE S. J. Brown, Quest Engineering Development Corporation (Humble, TX USA)
SESSION 1.3N (FSI- 02B)
Monday, July 21, 2:00 PM - 3:45 PM,
SYMPOSIUM ON FLOW-INDUCED VIBRATION: VIBRATION OF CYLINDERS IN CROSS-FLOW
Sponsored by: The Fluid-Structure Interaction Committee
Published in PVP Vol. 465, FLOW-INDUCED VIBRATION-2003
Developed by: M. J. Pettigrew, École Polytechnique (Montréal, QC CANADA); N. W. Mureithi, École Polytecnique (Montréal, QC CANADA)
Chair: T. Nakamura, Mitsubishi Heavy Industries (Takasago, JAPAN)
Vice Chair: P. Feenstra, McMaster University (Hamilton, Ontario CANADA)
DYNAMICS OF A CYLINDER WAKE UNDER CONTROLLED EXCITATION N.W. Mureithi, S. Goda, Kobe University (Kobe, JAPAN); T. Nakamura, Mitsubishi Heavy Industries Ltd. (JAPAN)
FLOW-INDUCED VIBRATION OF CROSS-SHAPED TUBE BUNDLE (THE EFFECT OF TUBE BUNDLE ARRANGEMENT) F. Inada, T. Nishihara, R. Morita, and A. Yasuo, Central Research Institute of Electric Power Industry (JAPAN); A. Sakashita and J. Mizutani, Tokyo Electric Power Company (Tokyo, JAPAN) FLOW-INDUCED VIBRATION AND WORK-RATE MEASUREMENTS OF STEAM- GENERATOR U-TUBES FOR THE ADVANCED CANDU REACTOR V. P. Janzen, J. Patrick, and B. A. W. Smith, Atomic Energy of Canada Ltd. (Chalk River, ON CANADA)
SESSION 1.3O (FSI- 01C)
Monday, July 21, 2:00 PM - 3:45 PM,
ADVANCES IN FLUID DYNAMICS - I
Sponsored by: Fluid Structure Interaction Committee
Published in PVP Vol. 460, 7TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGIES IN FLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS - 2003
Developed by: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA); M. Fischer, Technical Consultant (München, GERMANY); A. E. Holdo, University of Hertfordshire (Herts, UK); S. Itoh, Kummamoto University (Kumamoto, JAPAN); M. Souli, Université de Lille (Lille, FRANCE)
Chair: A. E. Holdo, University of Hertfordshire (Herts, UK)
Vice Chair: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA)
THE GERMANO LARGE EDDY SIMULATION MODEL USED FOR THE SIMULATION OF SEPARATED FLOW E. Cetindogan, G. de With, and A. E. Holdø, University of Hertfordshire (Herts, UK)
COMPUTATIONAL FLUID DYNAMIC MODELLING OF HIGH ASPECT RATIO CROSS- SECTIONAL JETS I: THE EFFECT OF ORIFICE SHAPE ON JET BEHAVIOUR S.J. Wakes, University of Otago (Dunedin, NEW ZEALAND)
CFD MODELLING OF MULTIPHASE FLOW - AN OVERVIEW R. K. Calay and A. E. Holdø, University of Hertfordshire (Herts, UK)
THE DESIGN OF REFINEMENT CRITERIA FOR DYNAMIC GRID ADAPTATION APPLIED TO AIRFOIL FLOW MODELING M. Demir, G. de With, and A. E. Holdø, University of Hertfordshire (Herts, UK)
SESSION 1.3P Monday, July 21, 2:00 PM - 3:45 PM, Gold Assembly
NDE DEMONSTRATION FORUM - II
Sponsored by: The PVP Division Conference Committee
Developed by: C. C. Jaske, CC Technologies Services, Inc. (Columbus, OH USA)
Participants:
Expansion Seal Technologies, Fritz Sutor, http://www.expansionseal.com CC Technologies Services, Inc., Carl E. Jaske, http://www.cctechnologies.com Don E. Bray, Inc., Donald E. Bray, http://www.brayengr.com Advanced Technology Corporation, Fahmay Haggag, http://www.atc-ssm.com R/D Tech, Michael Moles, http://www.rd-tech.com ABS Consulting, John A. Farquharson, http://www.abs-jbfa.com
Block 1.4: Monday, July 21 (4:00 PM - 5:45 PM)
SESSION 1.4A (TUT- 01B)
Monday, July 21, 4:00 PM - 5:45 PM,
TUTORIAL: AN OVERVIEW OF ASME B31.3, THE PROCESS PIPING CODE - II
Sponsored by: The PVP Division Conference Committee
Presented by: C. Becht IV, Becht Engineering Company (Liberty Corner, NJ USA)
SESSION 1.4B (CS- 03)
Monday, July 21, 4:00 PM - 5:45 PM,
STRUCTURAL INTEGRITY OF PRESSURE COMPONENTS
Sponsored by: Codes and Standards Committee
Published in PVP Vol. 453, PRESSURE VESSELS AND PIPING CODES AND STANDARDS - 2003 Developed by: Y. Hari, University of North Carolina at Charlotte (Charlotte, NC USA)
Chair: Y. Hari, University of North Carolina at Charlotte (Charlotte, NC USA)
Vice Chair: D. Bhavnani, Public Service Electric & Gas (Hancock’s Bridge, NJ USA)
FINITE ELEMENT ANALYSIS OF AN ANNULAR TANK Y. Hari, University of North Carolina at Charlotte (Charlotte, NC USA)
ANALYSIS CONTINUITY CONSIDERATIONS AND METHODS USED IN FATIGUE MONITORING E. L. Cranford and M. A. Gray, Westinghouse Electric Company (Pittsburgh, PA USA)
CAPTURING NUCLEAR POWER PLANT DESIGN BASIS CONFIGURATION THROUGH EFFECTIVE SELF-ASSESSMENTS D. Bhavnani, Public Service Electric & Gas (Hancock’s Bridge, NJ USA)
STUDY OF GAPS BETWEEN COMPONENTS DURING DYNAMIC LOADING J. L. Bitner and David Raj, BWX Technologies (Barberton, OH USA)
SESSION 1.4C (CT- 01A, CS- 09)
Monday, July 21, 4:00 PM - 5:45 PM,
EFFICIENT COMPUTATIONAL MODELS FOR ELASTIC-PLASTIC AND LIMIT LOAD ANALYSIS OF PRESSURE VESSEL COMPONENTS - I
Sponsored by: Computer Technology, and Codes and Standards Committees
Published in PVP Vol. 458, COMPUTER TECHNOLOGY AND APPLICATIONS
Developed by: W. D. Reinhardt (Cambridge, Ontario CANADA); D. P. Jones (West Mifflin, PA USA)
Chair: P. Mangalaramanan, Dana Corporation (Kalamazoo, MI USA)
Vice Chair: S. Iyer, Atomic Energy of Canada Ltd. (Mississauga, ON, Canada)
APPLICATION OF THE LINEAR MATCHING METHOD ON THE INTEGRITY ASSESSMENT FOR THE HIGH TEMPERATRURE RESPONSE OF STRUCTURES H.F. Chen and A. R. S. Ponter, University of Leicester (Leicester, UK) DISTINGUISHING RATCHETING AND SHAKEDOWN CONDITIONS IN PRESSURE VESSELS W. Reinhardt, Babcock & Wilcox Canada (Cambridge, Ontario CANADA)
BELLOWS DESIGN EQUATIONS SUPPORTED BY LIMIT ANALYSIS R. Broyles, Senior Flexonics Inc. (Oak Ridge, TN USA)
LOWER BOUND LIMIT LOAD DETERMINATION: THE mβ - MULTIPLIER METHOD R. Seshadri, Memorial University of Newfoundland (St. John’s, Newfoundland CANADA)
SESSION 1.4D (OAC- 01C)
Monday, July 21, 4:00 PM - 5:45 PM,
AGING MANAGEMENT AND LICENSE RENEWAL - III
Sponsored by: Operations, Applications and Components Committee
Published in PVP Vol. 468, AGING MANAGEMENT AND COMPONENT ANALYSIS
Developed by: V. N. Shah, Argonne National Laboratory (Argonne, IL USA); M. H. Sanwarwalla, Sargent & Lundy LLC (Chicago, IL USA); G. Bezdikian, EDF Pole Industrie (Saint Denis, FRANCE)
Chair: K. C. Chang US NRC (Washington, DC USA)
Vice Chair: P.E. Yuhn IAEA (Vienna, AUSTRIA)
MODELING SWIRL PENETRATION AND THERMAL CYCLING IN UN-ISOLABLE BRANCH LINES OF PWR PLANTS J. D. Keller and A. J. Bilanin, Continuum Dynamics Inc. (Ewing, NJ USA); S. T. Rosinski, Electric Power Research Institute (Charlotte, NC USA)
DATA ANALYSIS FOR RPV LIFE MANAGEMENT STUDIES OF TEMPERATURE MEASUREMENTS FROM MONITORING OF SAFETY INJECTION FLUID IN SPENT FUEL PIT COOLING AND TREATMENT SYSTEM STORAGE TANK D. Lagrange and V. Venturini, EDF (Chatou, FRANCE) ; G. Bezdikian, EDF (Saint Denis, FRANCE) ; J. Salaun, EDF (Ouzouer sur Loire, FRANCE)
EUROPEAN NETWORK "AMES" FOR REACTOR COMPONENT AGEING R. Gerard, TRACTEBEL (Brussels, BELGIUM); L. Debarberis and F. Sevini, European Commission (JRC, IC Petten THE NETHERLANDS); M. Brumovsky, Nuclear Research Institute (Rez plc, CZECH REPUBLIC) A HELP FOR LIFETIME MANAGEMENT: DEFECT CHARACTERIZATION THROUGH SIGNAL PROCESSING OF ULTRASONIC DATA S. Gautier and L. Chatellier EDF (Chatou, FRANCE)
SESSION 1.4E (OAC- 04A, CT- 06)
Monday, July 21, 4:00 PM - 5:45 PM,
RISK AND RELIABILITY TOPICS - I
Sponsored by: Operations, Applications & Components Committee and Computer Technology Committee
Published in PVP Vol. 458, COMPUTER TECHNOLOGY AND APPLICATIONS
Developed by: J. A. Farquharson, ABS Consulting (Knoxville, TN USA)
Chair: J. A. Farquharson, ABS Consulting (Knoxville, TN USA)
Vice Chair: F.L. Cho, Illinois Department of Nuclear Safety (Springfield, IL USA)
A NEW GRAPHICAL TOOL FOR BUILDING LOGIC-GATE TREES T. F. Bott and S. W. Eisenhawer, Los Alamos National Laboratory (Los Alamos, NM USA); J. Kingson, Innovative Technical Solutions, Inc. (Los Alamos, NM, USA)
RELIABILITY ANALYSIS OF THE TUBE HYDROFORMING PROCESS BASED ON FORMING LIMIT DIAGRAM B. Li, Don R. Metzger, and Tim J. Nye, Department of Mechanical Engineering, McMaster University (Hamilton, Ontario CANADA)
COMPUTER SIMULATION OF PIPELINE DEFORMATION ON THE BASIS OF DATA FROM AN INTELLIGENT CALIPER INSPECTION TOOL B. Blyukher, Health and Safety Department, Indiana State University (Terre Haute, IN USA)
SESSION 1.4F (DA- 01A)
Monday, July 21, 4:00 PM - 5:45 PM,
DESIGN AND ANALYSIS OF PIPING COMPONENTS - I
Sponsored by: Design and Analysis Committee Published in PVP Vol. 469, DESIGN AND ANALYSIS OF PRESSURE VESSELS AND PIPING: IMPLEMENTATION OF ASME B31, FATIGUE, ASME SECTION VIII, AND BUCKLING ANALYSES
Developed by: J. McCabe, Electric Boat Corporation (Groton, CT USA); C. Basavaraju, Bechtel Corporation (Frederick, MD USA); T. Seipp, Fluor Canada Ltd. (Calgary, AB CANADA)
Chair: J. McCabe, Electric Boat Corporation (Groton, CT USA)
Vice Chair: T. Seipp, Fluor Canada Ltd. (Calgary, AB CANADA)
INVESTIGATION OF STRESS INDICES AND DIRECTIONAL LOADING FOR ECCENTRIC REDUCERS E. A. Wais, Wais and Associates (Atlanta, GA USA); E.C. Rodabaugh, Consultant (Dublin, OH USA); R. Carter, Electric Power Research Institute (Charlotte, NC USA)
RELAXED HANGER SPANS FOR NON-CRITICAL PIPING C. Basavaraju and R. Fox, Bechtel Corporation (Frederick, MD, USA)
HYDROGEN INDUCED CRACKING OF WELDS IN STEEL PIPELINES J. A. Ramirez, Mexican Petroleum Institute (Mexico DF MEXICO); J. L. Gonzalez, National Polytechnic Institute (Mexico DF MEXICO)
SESSION 1.4G (DA- 04B)
Monday, July 21, 4:00 PM - 5:45 PM,
PTS ANALYSES
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 469, DESIGN AND ANALYSIS OF PRESSURE VESSELS AND PIPING: IMPLEMENTATION OF ASME B31, FATIGUE, ASME SECTION VIII, AND BUCKLING ANALYSES
Developed by: D. Moinereau, EDF (Cedex FRANCE); K. Yoon, Framatome, ANP (Lynchburg, VA USA); J.-B. Choi, Sungkyunkwan University (KOREA)
Chair: D. Moinereau, EDF (Cedex FRANCE),
Vice Chair: M. Brumovsky, Nuclear Research Institute (Rez, CZECH REPUBLIC) CFD-TOOL FOR ASSESSMENT OF THE RPV INTEGRITY IN PTS CONDITIONS FOR LIFETIME EVALUATION. METHODOLOGY AND QUALIFICATION TASK OF THE EDF NUMERICAL TOOLS A. Martin, EDF (Chatou, FRANCE); F. Beaud and F. Ternon-Morin, EDF (Villeurbanne, FRANCE); T. Veneau, EDF (Chatou, FRANCE)
PWR NUCLEAR POWER PLANTS REACTOR VESSEL AND COOLANT SYSTEM CAST DUPLEX STAINLESS STEEL ELBOWS. NEW RESULTS IN INTEGRITY ANALYSIS G. Bezdikian, EDF (Saint-Denis, FRANCE); C. Faidy and P. Cambefort, EDF (Villeurbanne, FRANCE); D. Moinereau, EDF (Cedex FRANCE),
THE SENSITIVITY OF PRESSURIZED THERMAL SHOCK ANALYSIS RESULTS TO ALTERNATIVE MODELS FOR WELD FLAW DISTRIBUTIONS T.L. Dickson, Oak Ridge National Laboratory (Oak Ridge, TN USA); F.A. Simonen, Pacific Northwest Laboratory (Richland, WA USA)
DETERMINISTIC AND PROBABILISTIC ASSESSMENTS OF THE REACTOR PRESSURE VESSEL STRUCTURAL INTEGRITY: BENCHMARK COMPARISONS S. Turato and V. Venturini, EDF (Chatou, FRANCE); E. Meister, EDF (Villeurbanne, FRANCE); R. Bass, T.L. Dickson, and C. Pugh, Oak Ridge National Laboratory (Oak Ridge, TN USA)
SESSION 1.4J (SE-11)
Monday, July 21, 4:00 PM - 5:45 PM,
SEISMIC STRUCTURES /SYSTEMS RESPONSE AND INTERACTION
Sponsored by: The Seismic Engineering Committee
Published in PVP Vol. 466, SEISMIC ENGINEERING - 2003
Developed by: J. C. Chen and Q. Hossain, Lawrence Livermore National Laboratory (Livermore, CA USA)
Chair: J. C. Chen, Lawrence Livermore National Laboratory (Livermore, CA USA)
Vice Chair: N. Shimizu, Iwaki Meisei University (Iwaki, Fukushima, JAPAN)
SEISMIC RESPONSES OF TRANSMISSION TOWER-PILE-SOIL DYNAMIC INTERACTION H.-N. Li, S.-Y. Xiao, and S.-Y. Wang, Dalian University of Technology (Dalian, P. R. CHINA) GENERATION OF IN-STRUCTURE RESPONSE SPECTRA CONSIDERING SECONDARY SYSTEM MASS INTERACTION T. Ma, Bechtel National Inc. (San Francisco, CA USA); Q. Hossain, Lawrence Livermore National Laboratory (Livermore, CA USA); F. Ostadan, Bechtel Inc. (San Francisco, CA USA)
FRAGILITY ANALYSIS FOR BRIDGES IN TAIWAN W. I. Liao, National University of Kaohsiung, (Kaohsiung, TAIWAN); C. H. Loh, National Center for Research on Earthquake Engineering (Taipei, TAIWAN)
SESSION 1.4K (NDE- 02)
Monday, July 21, 4:00 PM - 5:45 PM,
ULTRASONIC NDE - II
Sponsored by: PVP NDE Division Committee
Published in PVP Vol. 456, ULTRASONIC NON-DESTRUCTIVE EVALUATION FOR MATERIALS SCIENCE AND INDUSTRIES
Developed by: C. Miyasaka, The Pennsylvania State University (University Park, PA USA)
Chair: J. L. Rose, The Pennsylvania State University (University Park, PA USA)
Vice Chair: D. E. Bray, Don E. Bray Inc. (College Station, TX USA)
A NOVEL TECHNIQUE WITH A MAGNETOSTRICTIVE TRANSDUCER FOR IN SITU LENGTH MONITORING OF A DISTANT SPECIMEN M. Pedrick, M. Heckman, and B. R. Tittmann, The Pennsylvania State University (University Park, PA USA)
NONDESTRUCTIVE EVALUATION OF DEGRADED 2.25CR-1MO STEEL AND ESTIMATION OF NONLINEAR ACOUSTIC EFFECT USING BISPECTRAL ANALYSIS I.-K. Park, Seoul National University of Technology (Nowon-gu, Seoul KOREA); K.-Y. Jhang and H.-M. Kim, Han-Yang University (Seoul, KOREA)
PIPLINE GIRTH WELD INSPECTIONS USING ULTRASONIC PHASED ARRAYS M. D. C. Moles, R/D Tech (Ontario CANADA); N. Dubé, R/D Tech (Québec, CANADA); E. Ginzel, Material Research Institute (Ontario CANADA)
GUIDED WAVE FOCUSING MECHANICS IN PIPE T. Hayashi, K. Kawashima, Nagoya Institute of Technology (Nagoya, JAPAN); Z. Sun, J. L. Rose, The Pennsylvania State University (University Park, PA USA)
LONGITUDINAL WAVE DISPERSION IN FLUID SATURATED GRANULAR MEDIA H. Tavossi, Mesa State College (Grand Junction, CO USA); B. R. Tittmann, The Pennsylvania State University (University Park, PA USA)
SESSION 1.4L (MF- 01C)
Monday, July 21, 4:00 PM - 5:45 PM,
APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT - III
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 462, APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT
Developed by: D. P. G. Lidbury, Serco Assurance (Warrington, Cheshire UK); D. A. Scarth, Kinectrics, Inc. (Toronto, Ontario CANADA); P. S. Lam, Westinghouse Savannah River Co. (Aiken, SC USA); Y. Y. Wang, Engineering Mechanics Corp. of Columbus (Columbus, OH USA)
Chair: P. S. Lam, Westinghouse Savannah River Company (Aiken, SC USA)
Vice Chair: Y. Y. Wang, Engineering Mechanics Corp. of Columbus, (Columbus, OH USA)
A NEW APPROACH TO EVALUATE FRACTURE TOUGHNESS OF STRUCTURAL MATERIALS J. A. Wang and K. C. Liu, Oak Ridge National Laboratory (Oak Ridge, TN USA)
STATISTICAL MODEL FOR PREDICTION OF PLATE-SPECIFIC FRACTURE TOUGHNESS PROPERTIES OF ASTM A285 STEEL K. H. Subramanian, B. J. Wiersma, A. J. Duncan, and S. P. Harris, Westinghouse Savannah River Company (Aiken, SC USA)
C-SPECIMENS FRACTURE TOUGHNESS TESTING: EFFECT OF SIDE GROOVES AND η-FACTOR Y. Kim and Y. J. Chao, University of South Carolina (Columbia, SC USA); M. J. Pechersky, and M. J. Morgan, Westinghouse Savannah River Company (Aiken, SC USA) CASE STUDY ON LBB APPLICATION FOR FIELD FABRICATION WELD METAL OF NUCLEAR PRIMARY PIPING SYSTEMS K.-C. Kim, J.-T. Kim, J.-I. Suk, H. K. Kwon, U.-H. Sung and B.-I. Yang, Doosan Heavy Industries & Construction Co., Ltd. (Changwon, Kyungnam KOREA)
SESSION 1.4M (FSI- 03B)
Monday, July 21, 4:00 PM - 5:45 PM,
THERMAL- HYDRAULIC PROBLEMS: ANTICIPATING, MITIGATING, OR AVOIDING THEM IN VESSELS, PIPING, AND COMPONENTS - II
Sponsored by: Fluid Structure Interaction Committee
Published in PVP Vol. 454, PROBLEMS INVOLVING THERMAL-HYDRAULICS, LIQUID SLOSHING, AND EXTREME LOADS ON STRUCTURES
Developed by: F. J. Moody, GE (Retired) (Murphys, CA USA); J. C. Jo, Korea Institute of Nuclear Safety (Taejon, KOREA)
Chair: F. J. Moody, GE (Retired) (Murphys, CA USA)
Vice Chair: J. C. Jo, Korea Institute of Nuclear Safety (Taejon, KOREA)
AN UNSTEADY ANALYSIS ON THERMAL STRATIFICATION IN THE SCS PIPING BRANCHED OFF THE RCS PIPING K. C. Kim, M. H. Park, and H. K. Youm, Korea Power Engineering Company (KOREA); S. K. Lee, T. R. Kim, and J. K. Yoon, Korea Electric Power Research Institute (KOREA)
A BOUNDARY ELEMENT METHOD FOR THE CONJUGATE HEAT TRANSFER PROBLEM OF THERMALLY DEVELOPING LAMINAR FLOW IN A PIPE C. Y. Choi, Jeonju University (KOREA); J. C. Jo and H. G. Kim, Korea Institute of Nuclear Safety (KOREA)
FATIGUE EFFECT OF RCS BRANCH LINE BY THERMAL STRATIFICATION H. K. Youm, K. C. Kim, M. H. Park, H. S. Kim, and T. E. Jin, Korea Power Engineering Company (KOREA); S. K. Lee, T. R. Kim, and H. J. Kim, Korea Electric Power Research Institute (KOREA)
PRESSURE OSCILLATIONS FROM ACOUSTIC STANDING WAVES INTERACTING WITH STEAM FLOW INSTABILITY IN VESSEL EQUIPMENT AND PIPING J. Lynch, General Electric Nuclear Energy Division (San Jose, CA USA); F. J. Moody, GE, Retired (Murphys, CA USA)
SESSION 1.4N (FSI- 02C) Monday, July 21, 4:00 PM - 5:45 PM,
SYMPOSIUM ON FLOW-INDUCED VIBRATION: STEAM GENERATOR VIBRATION - PRACTICAL ASPECTS
Sponsored by: The Fluid-Structure Interaction Committee
Published in PVP Vol. 465, FLOW-INDUCED VIBRATION-2003
Developed by: M. J. Pettigrew, École Polytechnique (Montréal, QC CANADA); M. K. Au-Yang, Framatome Technology (Lynchburg, VA USA)
Chair: N. W. Mureithi, École Polytechnique (Montréal, QC CANADA)
Vice Chair: V. P. Janzen, Atomic Energy of Canada (Chalk River, Ontario CANADA)
THERMALHYDRAULIC ANALYSIS OF STEAM GENERATORS: APPLICATION OF THE THIRST CODE TO VIBRATION ANALYSIS M., Yetisir, J. Pietralik, and M. Mirzai, Atomic Energy of Canada Ltd. (Chalk River, ON CANADA)
SEVERED TUBES IN OPERATING NUCLEAR STEAM GENERATORS: CASE ANALYSIS NO.1 M. K. Au-Yang, Framatome-ANP (Linchburg, VA USA); S. Leshnoff, Exelon Corporation (Kennett Square, PA USA)
SEVERED TUBES IN OPERATING NUCLEAR STEAM GENERATORS: CASE ANALYSIS NO.2 M. K. Au-Yang, Framatome-ANP (Lynchburg, VA USA)
DAMPING OF STEAM GENERATOR TUBES C. K. Chandler, Framatome-ANP (Lynchburg, VA USA)
SESSION 1.4O (FSI- 01D)
Monday, July 21, 4:00 PM - 5:45 PM,
ADVANCES IN FLUID DYNAMICS - II
Sponsored by: Fluid Structure Interaction Committee Published in PVP Vol. 460, 7TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGIES IN FLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS - 2003
Developed by: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA); M. Fischer, Technical Consultant (München, GERMANY); A. E. Holdo, University of Hertfordshire (Herts, UK); S. Itoh, Kummamoto University (Kumamoto, JAPAN); M. Souli, Université de Lille (Lille, FRANCE)
Chair: S. J. Wakes, University of Otago (Dunedin, NEW ZEALAND)
Vice Chair: A. E. Holdo, University of Hertfordshire (Herts, UK)
IMPROVED WALL LAW METHODS FOR INDUSTRIAL APPLICATIONS OF CFD S.Eggleton, A.E.Holdo, and G. deWith, University of Hertfordshire (Herts, UK)
THE USE OF ADVANCED LES SUBGRID SCALE MODELS IN COMBINATION WITH DYNAMIC GRID ADAPTATION G. deWith and A. E. Holdø, University of Hertfordshire (Herts, UK); Nick Peller, TU Munich (Munich, GERMANY)
COMPUTATIONAL FLUID DYNAMIC MODELLING OF HIGH ASPECT RATIO CROSS- SECTIONAL JETS II: THE FLOW WITHIN THE PIPE AND FLANGE S.J. Wakes, University of Otago (Dunedin, NEW ZEALAND)
SIMPLIFIED FORMULAE OF DYNAMIC LIQUID PRESSURE IN RECTANGULAR CONTAINERS H.-N. Li and S.-Y. Wang, Dalian University of Technology (Dalian, P.R. CHINA); Y. Jia, Shenyang Architectural and Civil Engineering Institute (Shenyang, P.R. CHINA)
SESSION 1.4P
Monday, July 21, 4:00 PM - 5:45 PM, Gold Assembly
NDE Demonstration Forum - III
Sponsored by: The PVP Division Conference Committee
Developed by: C. C. Jaske, CC Technologies Services, Inc. (Columbus, OH USA)
Participants:
Expansion Seal Technologies, Fritz Sutor, http://www.expansionseal.com CC Technologies Services, Inc., Carl E. Jaske, http://www.cctechnologies.com Don E. Bray, Inc., Donald E. Bray, http://www.brayengr.com Advanced Technology Corporation, Fahmay Haggag, http://www.atc-ssm.com R/D Tech, Michael Moles, http://www.rd-tech.com ABS Consulting, John A. Farquharson, http://www.abs-jbfa.com
TUESDAY, July 22
Block 2.1: Tuesday, July 22 (8:30 AM - 10:15 AM)
SESSION 2.1A (TUT- 02A)
Tuesday, July 22, 8:30 AM - 10:15 AM,
TUTORIAL: DO’S AND DON’TS IN USING ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS FOR DESIGN BY SECTION III AND SECTION VIII RULES - I
Sponsored by: The PVP Division Conference Committee
Presented by: A. Kalnins, Lehigh University (Bethlehem, PA USA)
SESSION 2.1B (CS- 04A)
Tuesday, July 22, 8:30 AM - 10:15 AM,
PANEL SESSION: WHAT’S NEW IN CODES AND STANDARDS - I
Sponsored by: Codes and Standards Committee
Published in PVP Vol. 453, PRESSURE VESSELS AND PIPING CODES AND STANDARDS - 2003
Developed by: M. D. Rana, Praxair, Inc. (Tonawanda, NY USA)
Chair: G. Karcher, Consultant (Little Egg Harbor, NJ USA)
Vice Chair: M. D. Rana, Praxair, Inc. (Tonawanda, NY USA)
AN OVERVIEW OF THE NEW ASME SECTION VIII, DIVISION 2 PRESSURE VESSEL CODE D. Osage, The Equity Engineering Group (Shaker Heights, OH USA) TOUGHNESS RULES IN THE NEW ASME SECTION VIII DIVISION 2 CODE M. Prager, Welding Research Council (New York, NY USA)
DEVELOPMENT OF ISO STANDARDS FOR CRYOGENIC VESSELS M. D. Rana, Praxair, Inc. (Tonawanda, NY USA); H. Barthelemy, Air Liquide (Paris, FRANCE)
SESSION 2.1C (CT- 04B)
Tuesday, July 22, 8:30 AM - 10:15 AM,
ANALYSIS OF BOLTED JOINT - II
Sponsored by: Computer Technology Committee
Published in PVP Vol. 457, ANALYSIS OF BOLTED JOINTS - 2003
Developed by: A. Bouzid, Ecole de Technologie Superieure (Montreal, QC CANADA); T. Sawa, University of Yamanashi (Yamanashi, JAPAN); H. Kockelmann, University of Stuttgart (Stuttgart, GERMANY)
Chair: T. Sawa, University of Yamanashi (Yamanashi, JAPAN)
Vice Chair: H. Kockelmann, University of Stuttgart, (Stuttgart, GERMANY)
AN EVALUATION OF THE TIGHTNESS OF B16.5 FLANGED JOINTS USING THE PROPOSED ASME CODE APPENDIX BFJ (Presentation Only) R.W. Schneider, R. W. Schneider Associates (Allentown, PA USA); J.R. Payne, JPAC (Long Valley, NJ USA)
THE DESIGN OF FLANGES BASED ON FLEXIBILITY AND TIGHTNESS A. Bouzid and H. Beghoul, Ecole de Technologie Superieure (Montreal, QC CANADA)
ACHIEVING A LEAK FREE START UP - IMPOSSIBLE DREAM OR ACHIEVABLE PROJECT? K. W. McQuillan, Huntsman Petrochemicals Ltd. (UK); G. Milne, Hedley Purvis Ltd. (UK); G. Smith, Klinger Ltd. (UK)
BOLT LOAD CHANGES DUE TO INTERNAL PRESSURE IN GASKETED FLANGE CONNECTIONS S. Nagata, Toyo Engineering Corporation (Chiba, JAPAN); M. Matsumoto and T. Sawa, Yamanashi University (Yamanashi, JAPAN) SESSION 2.1D (OAC- 01D)
Tuesday, July 22, 8:30 AM - 10:15 AM,
AGING MANAGEMENT AND LICENSE RENEWAL - IV
Sponsored by: Operations, Applications and Components Committee
Published in PVP Vol. 468, AGING MANAGEMENT AND COMPONENT ANALYSIS
Developed by: V. N. Shah, Argonne National Laboratory (Argonne, IL USA); M. H. Sanwarwalla, Sargent & Lundy LLC (Chicago, IL USA); G. Bezdikian, EDF Pole Industrie (Saint Denis FRANCE)
Chair: C. Faidy, Electricite de France (Villeurbanne, FRANCE)
Vice Chair: M. Sanwarwalla, Sargent & Lundy LLC (Chicago, IL USA)
MECHANICAL STRESS IMPROVEMENT PROCESS (MSIP) USED TO PREVENT AND MITIGATE PRIMARY WATER STRESS CORROSION CRACKING (PWSCC) IN REACTOR VESSEL PIPING AT VC SUMMER E.A. Ray, Westinghouse Electric Co. (Pittsburgh, PA USA); K. Weir and C. Rice, South Carolina Electric and Gas (Columbia, SC USA); T. Damico, AEA Technology Engineered Services, (West Mifflin, PA USA)
A DECISION ADVISOR TO MANAGE THE IMPLICATIONS OF ALLOY 600 ISSUES R. K. Perdue, C.W. Mycoff, J. Woodcock, T. A. Meyer, and R. Llovet, Westinghouse Electric Co. (Pittsburgh, PA USA)
MANAGING THE AGING OF CRITICAL COMPONENTS OF NUCLEAR POWER PLANTS G. G. Elder, R. Llovet, T. A. Meyer, and E. Terek, Westinghouse Electric Co. (Pittsburgh, PA USA)
SESSION 2.1E (OAC- 03A)
Tuesday, July 22, 8:30 AM - 10:15 AM,
TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - I : INTRODUCTION
Sponsored by: Operations, Applications & Components Committee
Published in PVP Vol. 467, TRANSPORTATION, STORAGE AND DISPOSAL OF RADIOACTIVE MATERIALS Developed by: R. S. Hafner, Lawrence Livermore National Laboratory (Livermore, CA USA); M. E. Wangler, International Atomic Energy Agency (Vienna, AUSTRIA)
Chair: R. S. Hafner, Lawrence Livermore National Laboratory (Livermore, CA USA)
Vice Chair: C. S. Bajwa, U.S. Nuclear Regulatory Commission (Rockville, MD USA)
THE FRENCH APPROACH CONCERNING THE PROTECTION OF SHIPPING CASKS AGAINST TERRORISM B. Autrusson and D. Brochard, Institut de Radioprotection et de Sûreté Nucléaire (Fontenay-aux-Roses, Cedex FRANCE)
SURVEY OF PACKAGING REQUIREMENTS FOR THE TRANSPORT OF HIGHLY HAZARDOUS MATERIALS D. R. Leduc and A. C. Smith, Westinghouse Savannah River Company (Aiken, SC USA)
DESIGN COMPETITION FOR DEVELOPMENT OF A GENERAL PURPOSE FISSILE PACKAGE T. K. Houghtaling, A. C. Smith, G. A. Abramczyk, P. S. Blanton, D. S. Hoang, J. L. England, D. R. Leduc, L. F. Gelder, R. N. Lutz, N. K. Gupta, R. W. Watkins, E. T. Ketusky, T. T. Wu, C. A. Mckeel, and J. S. Bellamy, Westinghouse Savannah River Company (Aiken, SC USA)
A REVIEW OF A RADIOACTIVE MATERIAL SHIPPING CONTAINER INCLUDING DESIGN, TESTING, UPGRADING, COMPLIANCE PROGRAM AND SHIPPING LOGISTICS A. Celovsky, R. M. Lesco, J. G. Sypes, B. P. Gale, Atomic Energy of Canada Ltd., Chalk River Laboratories (Chalk River, Ontario CANADA)
SESSION 2.1F (STU- 01)
Tuesday, July 22, 8:30 AM - 10:15 AM,
11th STUDENT PAPER COMPETITION - I
Sponsored by: Senate of Past PVP Division Chairs
Published in PVP Vol. 464, RESIDUAL STRESS, FITNESS-FOR-SERVICE, AND MANUFACTURING PROCESSES (AND) STUDENT PAPER COMPETITION
Developed by: A. G. Ware (Idaho Falls, ID USA); T. H. Liu (Pittsburgh, PA USA); J. Sinnappan (Downers Grove, IL USA)
Chair: A. G. Ware (Idaho Falls, ID USA) Vice-Chair: T. H. Liu (Pittsburgh, PA USA)
Judges: A. G. Ware (Idaho Falls, ID USA); T. H. Liu (Pittsburgh, PA USA); J. Sinnappan (Downers Grove, IL USA)
ANALYTICAL SOLUTIONS OF CRACK TIP PLASTICITY ZONE SHAPE FOR A SEMI- INFINITE CRACK P. Jing, T. Khraishi, and L. Gorbatikh, University of New Mexico (Albuquerque, NM USA)
HEAT TRANSFER SIMULATION IN THE MOULD WITH GENERALIZED CURVILINEAR FORMULATION M.L.M. Eliseu and A.I. Rouboa, University of UTAD (Vila Real, PORTUGAL); C Monteiro, University of Minho (Minho, PORTUGAL)
VERIFICATION OF A FINITE ELEMENT ANALYSIS PROCEDURE FOR MODELING THE NONLINEAR, MONOTONIC IN-PLANE BEHAVIOR OF 4 INCH, SCHEDULE 10, STAINLESS STEEL, 90O ELBOWS J.K. Wilkins, North Carolina State University (Raleigh, NC USA)
BURST PRESSURE PREDICTIONS OF CRACKED PIPELINES USING A MICROMECHANICS APPROACH F. Dotta and C. Ruggieri, University of São Paulo (São Paulo, BRAZIL)
SESSION 2.1J (SE- 03)
Tuesday, July 22, 8:30 AM - 10:15 AM,
SEISMIC, SHOCK, AND VIBRATION ISOLATION
Sponsored by: The Seismic Engineering Committee
Published in PVP Vol. 466, SEISMIC ENGINEERING - 2003
Developed by: K. Ishida, Central Research Institute of Electric Power Industry (Chiba, JAPAN); S. Fujita, Tokyo Denki University (Tokyo, JAPAN); C. S. Tsai, Feng Chia University (Taichung, TAIWAN)
Chair: S. Fujita, Tokyo Denki University (Tokyo, JAPAN)
Vice Chair: S. C. Lu, Lawrence Livermore National Laboratory (Livermore, CA USA) DYNAMIC CHARACTERISTICS OF A SLIDING BEARING USING LUBRICANT MATERIAL FOR BASE ISOLATION OF LIGHT STRUCTURE N. Masaki, S. Takeuchi, and H. Hirata, Bridgestone Corporation (Yokohama, JAPAN)
A NUMERICAL MODEL OF LEAD MATERIAL AND ITS APPLICABILITY TO SIMULATION OF ISOLATION DEVICES A. Matsuda, Central Research Institute of Electric Power Industry (Chiba, JAPAN)
VERIFICATION OF LATERAL FORCE DISTRIBUTION FOR BASE-ISOLATED STRUCTURES INCLUDING HIGHER MODES C. S. Tsai, B. J. Chen, and T. C. Chiang, Feng-Chia University (Taichung, TAIWAN); W. S. Pong, San Francisco State University (San Francisco, CA USA)
SESSION 2.1K (NDE- 03)
Tuesday, July 22, 8:30 AM - 10:15 AM,
ULTRASONIC NDE - III
Sponsored by: PVP NDE Division Committee
Published in PVP Vol. 456, ULTRASONIC NON-DESTRUCTIVE EVALUATION FOR MATERIALS SCIENCE AND INDUSTRIES
Developed by: C. Miyasaka and B. R. Tittmann, The Pennsylvania State University (University Park, PA USA)
Chair: H. Tavossi, Mesa State College (Grand Junction, CO USA)
Vice Chair: C. Miyasaka, The Pennsylvania State University (University Park, PA USA)
GUIDED WAVES PROPAGATION MECHANICS ACROSS A PIPE ELBOW T. Hayashi and K. Kawashima, Nagoya Institute of Technology (Nagoya, Japan); Z. Sun and J. L. Rose, The Pennsylvania State University (University Park, PA USA)
SCATTERING FROM VOIDS IN SOLIDS IN THE INTERMEDIATE WAVELENGTH REGIME B. R. Tittmann, The Pennsylvania State University (University Park, PA USA)
CHARACTERIZATION OF MOON ROCK MEDIA WITH ELASTIC WAVES B. R. Tittmann, The Pennsylvania State University (University Park, PA USA) EXPERIMENTAL STUDY ON IMPACT-INDUCED DAMAGE IN CFRP LAMINATED COMPOSITES WITH SCANNED IMAGE MICROSCOPY H. Kasano, Takushoku University (Tokyo, JAPAN); C. Miyasaka, The Pennsylvania State University (University Park, PA USA)
STRESS AND TEMPERATURE EFFECTS ON ULTRASONIC PROPERTIES IN CROSS LINKED AND HIGH DENSITY POLYETHYLENE D. E. Bray and J. Vela, Don E. Bray, Inc. (College Station, TX USA); R. S. Al-Zubi, Poly Processing Company (French Camp, CA USA)
SESSION 2.1L (MF- 01D)
Tuesday, July 22, 8:30 AM - 10:15 AM,
APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT - IV
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 462, APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT
Developed by: D. P. G. Lidbury, Serco Assurance (Warrington, Cheshire UK); D. A. Scarth, Kinectrics, Inc. (Toronto, Ontario CANADA); P. S. Lam, Westinghouse Savannah River Co. (Aiken, SC USA); Y. Y. Wang, Engineering Mechanics Corp. of Columbus (Columbus, OH USA)
Chair: D. A. Scarth, Kinectrics, Inc. (Toronto, Ontario CANADA)
Vice Chair: K. Hasegawa, Hitachi, Ltd. (Ibaraki-ken, JAPAN)
A SIMPLIFIED EVALUATION OF STRESS INTENSITY FACTORS FOR A SMALL DIAMETER PIPE PENETRATING A THICK PLATE J. M. Emery, Cornell University (Ithaca, NY, USA); K. Miyazaki, Hitachi, Ltd. (Hitachi-shi, JAPAN); A. R. Ingraffea, Cornell University (Ithaca, NY USA)
APPLICATION OF MASTER CURVE DATA FOR REACTOR VESSEL STEELS W. L. Server, ATI Consulting (Pinehurst, NC, USA); T. J. Griesbach, ATI Consulting (Dublin, CA USA); S. T. Rosinski, EPRI (Charlotte, NC USA)
IMPROVED FAILURE ASSESSMENT DIAGRAMS TO DESCRIBE DELAYED HYDRIDE CRACKING INITIATION AT A BLUNT FLAW D. A. Scarth, Kinectrics Inc. (Toronto, Ontario CANADA); E. Smith, Manchester University - UMIST (Manchester, UK) EFFECTS OF HYDRIDED REGION OVERLOAD ON DELAYED HYDRIDE CRACKING INITIATION FROM FLAWS IN Zr-2.5 Nb PRESSURE TUBES G. K. Shek and J. Cui, Kinectrics Inc. (Toronto, Ontario CANADA)
SESSION 2.1M (MF- 02A)
Tuesday, July 22, 8:30 AM - 10:15 AM,
OPTIMIZATION OF MANUFACTURING PROCESSES FOR METALLIC BASED COMPONENTS - I
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 464, RESIDUAL STRESS, FITNESS-FOR-SERVICE, AND MANUFACTURING PROCESSES (AND) STUDENT PAPER COMPETITION
Developed by: A. J. Duncan, Westinghouse Savannah River Company (Aiken, SC USA)
Chair: A. J. Duncan, Westinghouse Savannah River Company (Aiken, SC USA)
Vice Chair: K. H. Subramanian, Westinghouse Savannah River Company (Aiken, SC USA)
DYNAMIC ANALYSIS OF A RADIOACTIVE MATERIAL PACKAGE PRIMARY CONTAINMENT VESSEL IN A HIGH PRESSURE EVENT T.-T. Wu, G. A. Abramczyk, and P. S. Blanton, Westinghouse Savannah River Company (Aiken, SC USA)
PREDICTION OF CUTTING FORCES ON STAINLESS STEEL DURING A TURNING PROCESS Z. Cassier, P. Munoz-Escalona and J. Moreno, Universidad Simon Bolivar (VENEZUELA)
DIE DESIGN AND BLANKING ANALYSIS M. E. Hall, M. Long, S. D. Rhattigan, and E. B. Shields, Youngstown State University (Youngstown, OH USA)
IMPLEMENTATION OF AN OUTER CAN WELDING SYSTEM FOR SAVANNAH RIVER SITE PLUTONIUM PROCESSING FACILITY S. R. Howard, C. E. Sessions and W. L. Daugherty, Westinghouse Savannah River Company (Aiken, SC USA) SESSION 2.1N (FSI- 02D)
Tuesday, July 22, 8:30 AM - 10:15 AM,
SYMPOSIUM ON FLOW-INDUCED VIBRATION: IMPACT/FRETTING WEAR
Sponsored by: The Fluid-Structure Interaction Committee
Published in PVP Vol. 465, FLOW-INDUCED VIBRATION-2003
Developed by: M. J. Pettigrew, École Polytechnique (Montréal, QC CANADA); T. Nakamura, Mitsubishi Heavy Industries (Takasago, JAPAN)
Chair: S. J. Price, McGill University (Montréal, QC CANADA)
Vice Chair: M. Yetisir, Atomic Energy of Canada (Chalk River, Ontario CANADA)
A REVIEW OF WEAR SCAR PATTERNS OF NUCLEAR POWER PLANT COMPONENTS P. L. Ko, National Research Council of Canada (Vancouver, BC CANADA); A. Lina, and A. Ambard, EDF (FRANCE)
A NEW TUBE/SUPPORT IMPACT MODEL FOR HEAT EXCHANGER TUBES IN LOOSE SUPPORTS M. A. Hassan, University of New Brunswick (Frederiton, NB CANADA); D. S. Weaver and M. A. Dokainish, McMaster University (CANADA)
PROBABILISTIC ASSESSMENT OF FRETTING WEAR IN NUCLEAR STEAM GENERATOR TUBES UNDER FLOW INDUCED VIBRATION G. D. Morandin and R. G. Sauvé, Atomic Energy of Canada Ltd. (Mississauga, Ontario CANADA)
CHAOTIC VIBRATION AND WEAR CHARACTERISTICS OF A CIRCULAR LOOSELY SUPPORTED TUBE SUBJECTED TO A FLUID FLOW K. Fujita, H. Nishiumi, and T. Ito, Osaka Prefecture University (Osaka, JAPAN)
SESSION 2.1O (FSI- 01E)
Tuesday, July 22, 8:30 AM - 10:15 AM,
ADVANCES IN DAMAGE, FRACTURE, AND STRUCTURAL DYNAMICS - I
Sponsored by: Fluid Structure Interaction Committee Published in PVP Vol. 460, 7TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGIES IN FLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS - 2003
Developed by: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA); M. Fischer, Technical Consultant (München, GERMANY); A. E. Holdo, University of Hertfordshire (Herts, UK); S. Itoh, Kummamoto University (Kumamoto, JAPAN); M. Souli, Université de Lille (Lille, FRANCE)
Chair: C.-M. Kuo, I-Shou University (Kaohsiung, TAIWAN)
Vice Chair: T. W. Chao, California Institute of Technology (Pasadena, CA USA)
COMPARISON OF FRACTURE RESPONSE OF PRE-FLAWED TUBES UNDER INTERNAL STATIC AND DETONATION LOADING T. W. Chao and J. E. Shepherd, California Institute of Technology (Pasadena, CA USA)
MIXED MODE LOADING OF AN INTERFACE CRACK EXPOSED TO CREEP CONDITIONS A. P. Gordon and D. L. McDowell, Georgia Institute of Technology (Atlanta, GA USA)
BASIC STUDY FOR DESTRUCTION OF CRYOGENIC PRESSURE VESSEL BY SHOCK WAVE T. Watanabe, National Fisheries University (Yamaguchi, JAPAN); S. Itoh, T. Hamada, and K. Hokamoto, Kumamoto University (Kumamoto, JAPAN)
DYNAMIC FRACTURE PARAMETERS AND CALCULATIONS FOR 3-D CRACKS W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA) ; S. Itoh, Kumamoto University (Kumamoto, JAPAN)
SESSION 2.1P
Tuesday, July 22, 8:30 AM - 10:15 AM, Gold Assembly
SOFTWARE DEMONSTRATION FORUM - I
Sponsored by: The PVP Division Conference Committee
Developed by: J. F. Cory, Jr., EDS PLM Solutions (Milford, OH USA)
Participants:
Codeware, www.codeware.com Advanced Technology Corporation, www.atc-ssm.com COADE, www.COADE.com TECHStreet, www.techstreet.com CC Technologies, www.cctechnologies.com Computer Engineering, www.computereng.com ABS Consulting Group, Inc.,www.abs-jbfa.com Finglow Ltd, www.finglow.co.uk ATDAS CD adapco Group, www.cd-adapco.com Westinghouse Electric Company, LLC, www.westinghouse.com ANSYS CFX, www.Ansys.com The Equity Engineering Group, www.equityeng.com Structural Reliability Technology, www.srt-boulder.com CEA Systems, www.cea-int.com Stevenson and Associates, www.vecsa.com
Block 2.2: Tuesday, July 22 (10:30 AM - 12:15 PM)
SESSION 2.2A (TUT- 02B)
Tuesday, July 22, 10:30 AM - 12:15 AM,
TUTORIAL: DO’S AND DON’TS IN USING ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS FOR DESIGN BY SECTION III AND SECTION VIII RULES - II
Sponsored by: The PVP Division Conference Committee
Presented by: A. Kalnins, Lehigh University (Bethlehem, PA USA)
SESSION 2.2B (CS- 04B)
Tuesday, July 22, 10:30 AM - 12:15 PM,
PANEL SESSION: WHAT’S NEW IN CODES AND STANDARDS - II
Sponsored by: Codes and Standards Committee
Published in PVP Vol. 453, PRESSURE VESSEL AND PIPING CODES AND STANDARDS - 2003
Developed by: M. D. Rana, Praxair, Inc. (Tonawanda, NY USA) Chair: M. D. Rana, Praxair, Inc. (Tonawanda, NY USA)
Vice Chair: T.Tahara, High Pressure Institute of Japan (Tokyo, JAPAN)
DEVELOPMENT OF JIS STANDARDS B8265 HARMONIZING JAPANESE PRESSURE VESSEL REGULATIONS T. Tahara, High Pressure Institute of Japan (Tokyo, JAPAN)
SECTION XII OF THE ASME CODE - TRANSPORT TANKS A. Selz, Pressure Science, Inc. (Pittsburgh, PA USA)
NEW DEVELOPMENTS IN API 579 D. A. Osage, The Equity Engineering Group (Shaker Heights, OH USA)
OVERVIEW OF FRENCH PRESSURE EQUIPMENTS CODES & STANDARD AND ONGOING DEVELOPMENTS C. Faidy, EDF-SEPTEN (Cedex FRANCE)
SESSION 2.2C (CT- 04C)
Tuesday, July 22, 10:30 AM - 12:15 PM,
ANALYSIS OF BOLTED JOINT - III
Sponsored by: The Computer Technology Committee
Published in PVP Vol. 457, ANALYSIS OF BOLTED JOINTS - 2003
Developed by: A. Bouzid, Ecole de Technologie Superieure (Montreal, QC CANADA); T. Sawa, University of Yamanashi (Yamanashi, JAPAN); H. Kockelmann, University of Stuttgart (Stuttgart, GERMANY)
Chair: H. Kockelmann, University of Stuttgart, (Stuttgart, GERMANY)
Vice Chair: J.R. Payne, JPAC (Long Valley, NJ USA)
EFFECT OF HELICAL COIL REPAIR ON THE FATIGUE LIFE OF STUDS W. Reinhardt, D. Dhar and N. Sun, Babcock & Wilcox Canada (Cambridge, Ontario CANADA)
CALCULATION OF BOLTED FLANGE CONNECTIONS OF FLOATING AND METAL-TO- METAL CONTACT TYPE M. Schaaf, AMTEC (Lauffen, GERMANY); J. Bartonicek, GKN (Neckarwestheim, GERMANY) EFFECTS OF SCATTER IN BOLT PRELOAD OF PIPE FLANGE CONNECTIONS WITH GASKETS ON SEALING PERFORMANCE T. Sawa and M. Matsumoto, Yamanashi University (Yamanashi, Japan); S. Nagata, Toyo Engineering Corporation (Chiba, JAPAN)
SESSION 2.2D (OAC- 01E)
Tuesday, July 22, 10:30 AM - 12:15 PM,
AGING MANAGEMENT AND LICENSE RENEWAL - V
Sponsored by: Operations, Applications and Components Committee
Published in PVP Vol. 468, AGING MANAGEMENT AND COMPONENT ANALYSIS
Developed by: V. N. Shah, Argonne National Laboratory (Argonne, IL USA); M. H. Sanwarwalla, Sargent & Lundy LLC (Chicago, IL USA); G. Bezdikian, EDF Pole Industrie (Saint Denis FRANCE)
Chair: G. Bezdikian, Electricite de France (Saint Denis, FRANCE)
Vice Chair: W. L. Server, ATI Consulting (Pinehurst, NC USA)
IMPLICIT FATIGUE DESIGN OF PIPING SYSTEMS FOR LICENSE RENEWAL OF B31.1 PLANTS K. C. Chang, U. S. NRC (Washington, DC USA)
EFFECTIVE APPROACHES FOR MANAGING AGING EFFECTS IN BWR REACTOR COOLANT SYSTEM COMPONENTS FOR LICENSE RENEWAL B. Elliot, US NRC (Washington, DC USA); V. N. Shah and Y. Y. Liu, Argonne National Laboratory (Argonne, IL, USA)
LICENSE RENEWAL IN THE U.S. AND PLANT LIFE MANAGEMENT (PLIM) G. G. Young, Entergy Nuclear (Russellville, AR USA); M.A. Rinckel, Framatome-ANP (Lynchburg, VA USA)
SESSION 2.2E (OAC- 03B)
Tuesday, July 22, 10:30 AM - 12:15 PM,
TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - II: GAS GENERATION ISSUES Sponsored by: Operations, Applications & Components Committee
Published in PVP Vol. 467, TRANSPORTATION, STORAGE AND DISPOSAL OF RADIOACTIVE MATERIALS
Developed by: R. S. Hafner, Lawrence Livermore National Laboratory (Livermore, CA USA); S. J. Hensel, Westinghouse Savannah River Company (Aiken, SC USA); M. E. Wangler, International Atomic Energy Agency (Vienna, AUSTRIA)
Chair: C. S. Bajwa, U.S. Nuclear Regulatory Commission (Rockville, MD USA)
Vice Chair: M. R. Feldman, BWXT Y-12, L.L.C. (Oak Ridge, TN USA)
GAS ANALYSIS OF PLUTONIUM MATERIALS TESTED IN A BELL JAR S. J. Hensel and J. R. Kies, Westinghouse Savannah River Company (Aiken, SC USA)
REPACKAGING OF TWO BULGED CRIMP SEALED CANS CONTAINING PLUTONIUM BEARING MATERIALS R. W. Watkins and R. D. Hill, Westinghouse Savannah River Company (Aiken, SC USA)
GAS GENERATION MEASUREMENTS OF SCRAP Pu/U MATERIALS USING A BELL JAR S. J. Hensel, R. D. Hill, J. R. Kies, and R. W. Watkins, Westinghouse Savannah River Company (Aiken, SC USA)
PROPOSAL FOR QUALIFICATION OF GAS-GENERATING RADIOACTIVE PAYLOADS FOR TRANSPORTATION WITHIN A TYPE B PACKAGE — THE RECOMBINER/GETTER APPROACH T. K. Houghtaling and R. R. Livingston, Westinghouse Savannah River Company (Aiken, SC USA)
SESSION 2.2F (STU- 02)
Tuesday, July 22, 10:30 AM - 12:15 PM,
11th STUDENT PAPER COMPETITION - II
Sponsored by: Senate of Past PVP Division Chairs
Published in PVP Vol. 464, RESIDUAL STRESS, FITNESS-FOR-SERVICE, AND MANUFACTURING PROCESSES (AND) STUDENT PAPER COMPETITION
Developed by: A. G. Ware (Idaho Falls, ID USA); T. H. Liu (Pittsburgh, PA USA); J. Sinnappan (Downers Grove, IL USA)
Chair: T. H. Liu (Pittsburgh, PA USA)
Vice-Chair: J. Sinnappan (Downers Grove, IL USA)
Judges: A. G. Ware (Idaho Falls, ID USA); T. H. Liu (Pittsburgh, PA USA); J. Sinnappan (Downers Grove, IL USA)
DAMPING EFFECT IN FLUID-STRUCTURE INTERACTION: APPLICATION TO SLAMMING PROBLEM N. Aquelet and M. Souli, Université des Sciences et Technologies de Lille (Villeneuve d’Ascq, FRANCE)
PARALLEL COMPUTATIONS OF THE DYNAMIC BEHAVIOR OF BUBBLE PLUMES F.A. Bombardelli and M.H. García, University of Illinois (Urbana, IL USA); G.C. Buscaglia, Centro Atómico Bariloche and Instituto Balseiro (Bariloche, ARGENTINA)
APPLICATION OF THE LINEAR MATCHING METHOD TO CRACKED BODIES M.S. Habibullah and A.R.S. Ponter, University of Leicester (Leicester, UK)
SESSION 2.2J (SE- 06)
Tuesday, July 22, 10:30 AM - 12:15 PM,
TECHNOLOGIES FOR SEISMIC MITIGATION
Sponsored by: The Seismic Engineering Committee
Published in PVP Vol. 466, SEISMIC ENGINEERING - 2003
Developed by: C. S. Tsai, Feng Chia University (Taichung, TAIWAN); K. Ishida, Central Research Institute of Electric Power Industry (Chiba, JAPAN)
Chair: S. C. Lu, Lawrence Livermore National Laboratory (Livermore, CA USA)
Vice Chair: C. S. Tsai, Feng Chia University (Taichung, TAIWAN)
SEISMIC BEHAVIOR OF MFPS ISOLATED STRUCTURE UNDER NEAR-FAULT EARTHQUAKES AND STRONG GROUND MOTIONS WITH LONG PREDOMINANT PERIODS C. S. Tsai, T. C. Chiang, and B. J. Chen, Feng-Chia University (Taichung, TAIWAN) THE TENSILE TESTS OF NATURAL RUBBER BEARINGS FOCUSED ON THE EFFECT OF THE STEEL FLANGE PLATES R. Kato and K. Oka, Kurashikikako Co., Ltd. (Kurashiki, JAPAN); M. Takayama, Fukuoka University (Fukuoka, JAPAN)
EXPERIMENTAL STUDY OF A MULTIPLE BAY STRUCTURE ISOLATED WITH HYBRID BEARINGS C. S. Tsai, B. J. Chen, T. C. Chiang, and G. H. Lee, Feng-Chia University (Taichung, TAIWAN)
EXPERIMENTAL STUDY FOR HIGHLY PLASTIC MATERIAL DAMPER C. S. Tsai, T. T. Wei, and W. S. Chen, Feng-Chia University (Taichung, TAIWAN)
SESSION 2.2K (NDE- 04)
Tuesday, July 22, 10:30 AM - 12:15 PM,
SCANNING ACOUSTIC MICROSCOPY
Sponsored by: PVP NDE Division Committee
Published in PVP Vol. 456, ULTRASONIC NON-DESTRUCTIVE EVALUATION FOR MATERIALS SCIENCE AND INDUSTRIES
Developed by: C. Miyasaka and B. R. Tittmann, The Pennsylvania State University (University Park, PA USA)
Chair: C. Miyasaka, The Pennsylvania State University (University Park, PA USA)
Vice Chair: R. Tutwiler, The Pennsylvania State University (University Park, PA USA)
EVALUATION OF WB COATINGS BY SCANNED IMAGING MICROSCOPY J. Du, B. R. Tittmann, The Pennsylvania State University (University Park, PA USA)
EVALUATION OF DEFORMATION-INDUCED TRANSFORMATION AND REVERSION PROCESSES OF STAINLESS STEEL WITH SCANNING ACOUSTIC MICROSCOPY Y. Kasuga, Tamagawa University (Tokyo, Japan); C. Miyasaka, The Pennsylvania State University (University Park, PA USA); T. Endo, Olympus Optical Co., Ltd. (Tokyo, Japan)
TRANSVERSE IMPACT OF CFRP LAMINATES UNDER STATIC LOAD OF AXIAL COMPRESSION WITH SCANNED IMAGE MICROSCOPY H. Kasano, Takushoku University (Tokyo, Japan); C. Miyasaka, The Pennsylvania State University (University Park, PA USA)
CONTROL ARCHITECTURE FOR 30 MHZ LINEAR IMAGING ARRAY R. L. Tutwiler J. P. Stitt, K. K. Shung, Q. Wu, T. A. Ritter, X. Yang, and J. Sabarad, The Pennsylvania State University (University Park, PA USA)
ACOUSTIC MICROSCOPY FOR EVALUATING CRACKS PRODUCED BY CO2 LASER WITHIN THIN ALUMINA PLATES C. Miyasaka and B. R. Tittmann The Pennsylvania State University (University Park, PA USA)
SESSION 2.2L (MF- 01E)
Tuesday, July 22, 10:30 AM - 12:15 PM,
APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT - V
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 462, APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT
Developed by: D. P. G. Lidbury, Serco Assurance (Warrington, Cheshire UK); D. A. Scarth, Kinectrics, Inc. (Toronto, Ontario CANADA); P. S. Lam, Westinghouse Savannah River Co. (Aiken, SC USA); Y. Y. Wang, Engineering Mechanics Corp. of Columbus (Columbus, OH USA)
Chair: D. P. G. Lidbury, Serco Assurance (Warrington, Cheshire UK)
Vice Chair: E. Keim, Framatome ANP GmbH Technical Center (Erlangen GERMANY)
VALIDATION OF CONSTRAINT BASED METHODOLOGY IN STRUCTURAL INTEGRITY - VOCALIST: ANALYTICAL PROGRAMME E. Keim and M. Ludwig, Framatome ANP (GERMANY); R. Bass, W. McAfee, S. Yin, and P. Williams, Oak Ridge National Laboratory (Oak Ridge, TN USA); P. Gilles, Framatome ANP (Paris-la-Defense FRANCE); S. Marie and S. Chapuliot, CEA (Gif-sur-Yvette, FRANCE); Y. Wadier, EDF (Clamart FRANCE); D. Lidbury and A. Sherry, Serco Assurance (Warrington UK); U. Eisele, MPA (Stuttgart GERMANY); K. Wallin and H. Keinänen, VTT (Espoo FINLAND) FIRST DUCTILE TEARING TEST OF THE VOCALIST PROJECT ON A CRACKED FERRITIC PIPE SUBMITTED TO A FOUR-POINT-BENDING MOMENT: EXPERIMENT AND MODELLING S. Marie, CEA (Gif sur Yvette, FRANCE)
PROGRAMME VOCALIST : THE ENERGY APPROACH OF ELASTIC-PLASTIC FRACTURE MECHANICS APPLIED TO THE ANALYSIS OF THE CONSTRAINT EFFECT Y. Wadier, EDF (Clamart, FRANCE); M. Bonnamy AUSY-France (Issy les Moulineaux, FRANCE)
SESSION 2.2M (MF- 02B)
Tuesday, July 22, 10:30 AM - 12:15 PM,
OPTIMIZATION OF MANUFACTURING PROCESSES FOR METALLIC BASED COMPONENTS - II
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 464, RESIDUAL STRESS, FITNESS-FOR-SERVICE, AND MANUFACTURING PROCESSES (AND) STUDENT PAPER COMPETITION
Developed by: A. J. Duncan, Westinghouse Savannah River Company (Aiken, SC USA)
Chair: A. J. Duncan, Westinghouse Savannah River Company (Aiken, SC USA)
Vice Chair: K. H. Subramanian, Westinghouse Savannah River Company (Aiken, SC USA)
INNOVATIVE FLASH CONTROL METHODS FOR INERTIA WELDING P. S. Korinko, H. B. Peacock, Jr. and G. K. Chapman, Westinghouse Savannah River Company (Aiken, SC USA)
TWO NUMERICAL MODELS FOR PREDICTION OF AN INDUSTRIAL CONCASTING PROCESS F. Kavicka, J. Stetina and K. Stransky, Technical University of Brno, (CZECH REPUBLIC); J. Dobrovska and V. Dobrovska, VSB - Technical University of Ostrava Brno (CZECH REPUBLIC); J. Heger, ALSTOM Power Technology Center (UK)
EXPANDING RING INSERT FOR POUR SPOUT REPAIR OF DEFENSE WASTE PROCESSING FACILITY GLASS MELTER H. B. Peacock Jr., P-S Lam, K. J. Imrich, D. F. Leader, and Daniel C. Iverson, Westinghouse Savannah River Company (Aiken, SC USA) SESSION 2.2N (FSI- 02E)
Tuesday, July 22, 10:30 AM - 12:15 PM,
SYMPOSIUM ON FLOW-INDUCED VIBRATION: VIBRATION OF PWR FUEL AND PIPING
Sponsored by: The Fluid-Structure Interaction Committee
Published in PVP Vol. 465, FLOW-INDUCED VIBRATION-2003
Developed by: M. J. Pettigrew, École Polytechnique (Montréal, QC CANADA); J. V. Antunes, Instituto Technologico Nuclear (Lisbon, PORTUGAL)
Chair: D. S. Weaver, McMaster University (Hamilton, Ontario CANADA)
Vice Chair: R. W. Motriuk, Arcus Solutions Inc. (Calgary, Alberta CANADA)
STUDY OF THE FUEL ROD AND GRID SUPPORTS INTERACTION P. R. Rubiolo, D. V. Paramonov, Westinghouse Electric Company (Pittsburgh, PA USA)
PWR FUEL ASSEMBLY MODAL TESTING AND ANALYSIS B. Collard, S. Pisapia, and F. Witters, CEN (Cadarache, France); S. Bellizzi, LMA CNRS (Marseille, France)
ON-SITE EVALUATION OF THE BENDING STRESS AT THE ROOT OF SMALL BORE PIPES BY ACCELEROMETRIC MEASUREMENTS J. Guillou and L. Paulhiac, EDF (Clamart, FRANCE)
VORTEX-SHEDDING OF A MULTI-HOLE ORIFICE SYNCHRONIZED TO AN ACOUSTIC CAVITY IN A PWR WATER PIPING SYSTEM P. Moussou, S. Caillaud, V. Villouvier, A. Archer, S. Benazet,and B. Rechu, EDF (Clamart, FRANCE)
SESSION 2.2O (FSI- 01F)
Tuesday, July 22, 10:30 AM - 12:15 PM,
ADVANCES IN DAMAGE, FRACTURE, AND STRUCTURAL DYNAMICS - II
Sponsored by: Fluid Structure Interaction Committee Published in PVP Vol. 460, 7TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGIES IN FLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS - 2003
Developed by: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA); M. Fischer, Technical Consultant (München, GERMANY); A. E. Holdo, University of Hertfordshire (Herts, UK); S. Itoh, Kummamoto University (Kumamoto, JAPAN); M. Souli, Université de Lille (Lille, FRANCE)
Chair: T. W. Chao, California Institute of Technology (Pasadena, CA USA)
Vice Chair: C.-M. Kuo, I-Shou University (Kaohsiung, TAIWAN)
ULTRASONIC EVALUATION OF CERAMICS WITH MICRO-CRACKS S.-J. Wu, C.-A. Jeng, and C.-M. Kuo, I-Shou University (Kaohsiung, TAIWAN)
INTEGRITY ASSESSMENT OF CERAMIC CVD LINERS AGAINST PLASMA LOADING W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA); V. Kudriavtsev, CFD Canada (Toronto, Ontario CANADA); V. Kolobov, CFD Research Corporation (Huntsville, AL USA)
THREE-DIMENSIONAL NONLINEAR MODELING OF RUBBER BUSHING SUBJECTED TO COMPLEX LOADING W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA)
FLUID STRUCTURE INTERACTION ANALYSIS OF ADAPTIVE FINGER SEAL ASSEMBLY V. Kudriavtsev, CFD Canada (Toronto, Ontario CANADA); J. Braun, The University of Akron (Akron, Ohio USA); R. C. Hendricks, NASA Glenn Research Center (Cleveland, OH USA)
SESSION 2.2P
Tuesday, July 22, 10:30 AM - 12:15 PM, Gold Assembly
SOFTWARE DEMONSTRATION FORUM - II
Sponsored by: The PVP Division Conference Committee
Developed by: J. F. Cory, Jr., EDS PLM Solutions (Milford, OH USA)
Participants:
Codeware, www.codeware.com Advanced Technology Corporation, www.atc-ssm.com COADE, www.COADE.com TECHStreet, www.techstreet.com CC Technologies, www.cctechnologies.com Computer Engineering, www.computereng.com ABS Consulting Group, Inc.,www.abs-jbfa.com Finglow Ltd, www.finglow.co.uk ATDAS CD adapco Group, www.cd-adapco.com Westinghouse Electric Company, LLC, www.westinghouse.com ANSYS CFX, www.Ansys.com The Equity Engineering Group, www.equityeng.com Structural Reliability Technology, www.srt-boulder.com CEA Systems, www.cea-int.com Stevenson and Associates, www.vecsa.com
Block 2.3: Tuesday, July 22 (2:00 PM - 3:45 PM)
SESSION 2.3B (CS- 02A, MF- 09)
Tuesday, July 22, 2:00 PM - 3:45 PM,
ENVIRONMENTAL FATIGUE ISSUES IN THE ASME B&PV CODE - I
Sponsored by: Codes and Standards Committee and Materials and Fabrication Committee
Published in PVP Vol. 453, PRESSURE VESSELS AND PIPING CODES AND STANDARDS - 2003
Developed by: D. P. Jones, Bechtel Bettis, Inc. (Pittsburgh, PA USA); M. Higuchi, IHI (Yokohama, JAPAN); H. Mehta, GE (San Jose, CA USA); S. Yukawa, Consultant (Boulder, CO USA)
Chair: D. P. Jones, Bechtel Bettis, Inc. (Pittsburgh, PA USA)
Vice Chair: H. Mehta, GE (San Jose, CA USA)
MARGINS FOR ASME CODE FATIGUE DESIGN CURVE MARGINS - EFFECTS OF SURFACE FINISH AND MATERIAL VARIABILITY O. K. Chopra and William J. Shack, ANL (Argonne, IL USA) EFFECTS OF STRAIN RATE ON LOW CYCLE FATIGUE BEHAVIOR OF THERMALLY AGED A533B PRESSURE VESSEL STEELS IN HIGH TEMPERATURE WATER X. Wu and Y. Katada, National Institute for Materials Science (Tsukuba, JAPAN)
EVALUATION OF FATIGUE DAMAGE IN LWR WATER WITH AND WITHOUT THRESHOLD AND MODERATION FACTOR M. Higuchi, IHI (Yokohama, JAPAN); K. Tsutsumi, MHI (Takasago, JAPAN); and K. Sakaguchi, JAPEIC (Hitachinaka, JAPAN)
SESSION 2.3C (CT- 01B, CS-10)
Tuesday, July 22, 2:00 PM - 3:45 PM,
EFFICIENT COMPUTATIONAL MODELS FOR ELASTIC-PLASTIC AND LIMIT LOAD ANALYSIS OF PRESSURE VESSEL COMPONENTS - II
Sponsored by: Computer Technology, and Codes and Standards Committees
Published in PVP Vol. 458, COMPUTER TECHNOLOGY AND APPLICATIONS
Developed by: W. D. Reinhardt (Cambridge, Ontario CANADA); D. P. Jones (West Mifflin, PA USA)
Chair: J. L. Gordon, Bechtel Bettis Inc. (West Mifflin, PA USA)
Vice Chair: D. P. Jones, Bechtel Bettis Inc. (West Mifflin, PA USA)
APPROXIMATE ANALYSIS OF CREEP STRAINS AND STRESSES AT NOTCHES J. E. Nunez and G. Glinka, University of Waterloo (Waterloo, Ontario CANADA)
A NON-CYCLIC METHOD FOR PLASTIC SHAKEDOWN ANALYSIS W. Reinhardt, Babcock & Wilcox Canada (Cambridge, Ontario CANADA)
ACCELERATED LIMIT LOADS USING REPEATED ELASTIC FINITE ELEMENT ANALYSIS P. Mangalaramanan, Dana Corporation (Kalamazoo, MI USA)
ON THE CONSTRAINT-BASED FAILURE ASSESSMENT FOR SURFACE CRACKED WELDED PLATES UNDER TENSION X. Wang, Carleton University (Ottawa, Ontario CANADA); W. Reinhardt, Babcock & Wilcox Canada (Cambridge, Ontario CANADA)
SESSION 2.3D (OAC- 01F) Tuesday, July 22, 2:00 PM - 3:45 PM,
AGING MANAGEMENT AND LICENSE RENEWAL - VI
Sponsored by: Operations, Applications and Components Committee
Published in PVP Vol. 468, AGING MANAGEMENT AND COMPONENT ANALYSIS
Developed by: V. N. Shah, Argonne National Laboratory (Argonne, IL USA); M. H. Sanwarwalla, Sargent & Lundy LLC (Chicago, IL USA); G. Bezdikian, EDF Pole Industrie (Saint Denis FRANCE)
Chair: D. Demoss, Sargent & Lundy LLC (Chicago, IL USA)
Vice Chair: M. Aubray, Hydro-Quebec Gentilly Plant (Quebec, CANADA)
MANAGING AGING EFFECTS OF THE PASSIVE FUNCTIONS OF PRESSURE RETAINING ITEMS M. H. Sanwarwalla, Sargent & Lundy (Chicago, IL USA)
SIGNIFICANT CORROSION OF THE DAVIS-BESSE NUCLEAR REACTOR PRESSURE VESSEL HEAD T. A. Lang, First Energy Nuclear Operating Co. (Oak Harbor, OH USA)
EFFECTS OF FLOW ACCELERATED CORROSION ON PIPING STEADY-STATE VIBRATION EVALUATIONS (Presentation Only) B. J. Voll, Sargent & Lundy (Chicago, IL USA)
A MODIFIED TECHNIQUE FOR CRACK FORMATION ON NUCLEAR STEAM GENERATOR TUBING T. H. Lee, Y.J. Oh, and I. S. Hwang, Department of Nuclear Engineering, Seoul University (Seoul, KOREA); H.S. Chung, Korea Power Research Institute (Taejon, KOREA); J. Park, Argonne National Laboratory (Argonne, IL USA)
SESSION 2.3E (DA- 03A)
Tuesday, July 22, 2:00 PM - 3:45 PM,
DESIGN AND ANALYSIS OF VESSELS AND COMPONENTS - I
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 459, DESIGN AND ANALYSIS METHODS AND FITNESS FOR SERVICE EVALUATIONS FOR PRESSURE VESSELS AND COMPONENTS Developed by: D. H. Martens, Black & Veatch Pritchard Inc. (Overland Park, KS USA); M. A. Porter, Dynamic Analysis (Lawrence, KS USA)
Chair: M. A Porter, Dynamic Analysis (Lawrence, KS USA)
Vice Chair: D. H. Martens, Black & Veatch Pritchard Inc. (Overland Park, KS USA)
COMPARISON OF DIFFERENT METHODOLOGIES FOR STRESS ANALYSIS OF REINFORCING PADS M. W. Guillot, Stress Engineering Service (Metairie, LA USA); J. E. Helms, Louisiana State University (Baton Rouge, LA USA)
SAFETY ASSESSMENT OF THE JUNCTION BETWEEN A THICK PRESSURE VESSEL SHELL AND A THINNER HEMISPHERICAL HEAD X. Wang, Tsinghua University (Beijing, CHINA); J. Zheng, Zhejiang University at Yuquan Hangzhou (Zhejiang, CHINA)
STUDY OF THE EFFECT OF BOUNDARY CONDITIONS ON RESIDUAL STRESSES IN WELDING USING ELEMENT BIRTH AND ELEMENT MOVEMENT TECHNIQUES I. F. Z. Fanous and M. Y. A. Younan, The American University In Cairo (Cairo EGYPT), A. S. Wifi, Cairo University (Cairo EGYPT)
SESSION 2.3F (STU- 03)
Tuesday, July 22, 2:00 PM - 3:45 PM,
11th STUDENT PAPER COMPETITION - III
Sponsored by: Senate of Past PVP Division Chairs
Published in PVP Vol. 464, RESIDUAL STRESS, FITNESS-FOR-SERVICE, AND MANUFACTURING PROCESSES (AND) STUDENT PAPER COMPETITION
Developed by: A. G. Ware (Idaho Falls, ID USA); T. H. Liu (Pittsburgh, PA USA); J. Sinnappan (Downers Grove, IL USA)
Chair: J. Sinnappan (Downers Grove, IL USA)
Vice-Chair: A. G. Ware (Idaho Falls, ID USA)
Judges: A. G. Ware (Idaho Falls, ID USA); T. H. Liu (Pittsburgh, PA USA); J. Sinnappan (Downers Grove, IL USA) STUDY OF BURST CONDITIONS OF THIN-WALLED PRESSURE VESSELS UNDER HYPERVELOCITY IMPACT I.Y. Telitchev, University of Calgary (Calgary, AB CANADA)
THE DETERMINATION OF LOAD CHANGES IN BOLTED GASKETED JOINTS SUBJECTED TO ELEVATED TEMPERATURE A. Nechache and A. Bouzid, Ècole de Technologie Supérieure (Montréal, PQ CANADA)
ESTIMATION OF PLASTIC COLLAPSE LOAD OF STEAM GENERATOR TUBE WITH TWO PARALLEL AXIAL THROUGH-WALL CRACKS S.I. Moon, and Y.J. Kim, Sungkyunkwan University (Suwon, KOREA); J.H. Lee, Korean Institute of Nuclear Safety (Daejon, KOREA)
SESSION 2.3G (DA- 04C)
Tuesday, July 22, 2:00 PM - 3:45 PM,
STRESS INTENSITY FACTORS
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 461, FATIGUE, FRACTURE AND DAMAGE ANALYSIS - 2003
Developed by: D. Moinereau, EDF (Cedex FRANCE); K. Yoon, Framatome, ANP (Lynchburg, VA USA); J.-B. Choi, Sungkyunkwan University (KOREA)
Chair: M. Brumovsky, Nuclear Research Institute (Rez, CZECH REPUBLIC)
Vice Chair: K. Yoon, Framatome, ANP (Lynchburg, VA USA)
STRESS INTENSITY FACTOR SOLUTIONS FOR PART-THROUGHWALL PIPE FLAWS K. Kidwell and P. Rush, MPR Associates, Inc. (Alexandria, VA USA)
RECENT ADVANCES FOR J SIMPLIFIED ASSESSMENT IN RSE-M CODE B. Michel, CEA (St Paul Les Durance, FRANCE); J.P. Sermage, EDF (Villeurbanne, FRANCE); P. Gilles, Framatome, ANP (Paris FRANCE); B. Barthelet, EDF (St. Denis, FRANCE); P. Le Delliou, EDF (Moret-sur-Loing, FRANCE)
AN ANALYTICAL METHOD TO EVALUATE J VALUES IN ELBOWS SUBMITTED TO MECHANICAL LOADING S. Marie and Y. Kayser, CEA (Gif-sur-Yvette, FRANCE), NORMALIZED STRESS INTENSITY FACTOR SOLUTION OF AN INNER-SURFACE CIRCUMFERENTIAL CRACK IN THIN AND THICK WALLED CYLINDER UNDER THERMAL STRIPING T. Meshii, Fukui University (Fukui, JAPAN); K. Watanabe, Tokyo University (Tokyo, JAPAN)
APPROXIMATE ELASTIC-PLASTIC J ESTIMATES OF CYLINDERS WITH OFF-CENTER CIRCUMFERENTIAL THROUGH-WALL CRACKS D.J. Shim, N.S. Huh, Y.J. Kim, and Y.J. Kim, Sungkyunkwan University (Suwon, Kuynggi-do KOREA)
SESSION 2.3K (HPT- 01)
Tuesday, July 22, 2:00 PM- 3:45 PM,
ADVANCED APPLICATIONS IN HIGH PRESSURE TECHNOLOGY
Sponsored by: High Pressure Technology Committee
PUBLISHED IN PVP VOL. 455, HIGH PRESSURE TECHNOLOGY: 2003 SHAPING HIGH PRESSURE TECHNOLOGY FOR THE FUTURE
Developed by: D. T. Peters. Autoclave Engineers (Erie, PA USA)
Chair: D. T. Peters. Autoclave Engineers (Erie, PA USA)
Vice Chair: T. Kovach, Autoclave Engineers (Erie, PA USA)
A CRITICAL EXAMINATION OF THE SACH'S MATERIAL-REMOVAL METHOD FOR DETERMINATION OF RESIDUAL STRESS A. Parker, Royal Military College of Science, Cranfield University (East Sussex, ENGLAND)
FINITE ELEMENT ANALYSIS RESIDUAL STRESSES DUE TO ULTRA HIGH PRESSURE WATERJET S. Kunaporn, M. Ramulu, and M. G. Jenkins, University of Washington (Seattle, WA USA); M. Hashish, Flow International (Kent, WA USA)
ADVANCED DESIGN METHODS FOR PACKING CUPS OF HYPERCOMPRESSOR CYLINDERS E. Giaccomelli, F. Graziani, S. Pratesi, and N. Campo, GE Power Systems (Florence ITALY)
SESSION 2.3L (MF- 01F) Tuesday, July 22, 2:00 PM - 3:45 PM,
APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT - VI
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 462, APPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT
Developed by: D. P. G. Lidbury, Serco Assurance (Warrington, Cheshire UK); D. A. Scarth, Kinectrics, Inc. (Toronto, Ontario CANADA); P. S. Lam, Westinghouse Savannah River Co. (Aiken, SC USA); Y. Y. Wang, Engineering Mechanics Corp. of Columbus (Columbus, OH USA)
Chair: D. P. G. Lidbury, Serco Assurance (Warrington, Cheshire UK)
Vice Chair: D. A. Scarth, Kinectrics, Inc. (Toronto, Ontario CANADA)
FRACTURE TOUGHNESS TRANSFERABILITY STUDY BETWEEN THE MASTER CURVE METHOD AND A PRESSURE VESSEL NOZZLE USING LOCAL APPROACH A. Laukkanen, P. Nevasmaa, K. Wallin, H. Keinanen, VTT Industrial Systems (Espoo FINLAND)
CALCULATING CRACK OPENING AREA FOR THE LIMITED PLASTICITY SITUATION E. Smith, Manchester University/UMIST (Manchester UK)
ALLOWABLE AXIAL FLAW SIZES FOR STAINLESS STEEL PIPES DERIVED FROM LIMIT LOAD CRITERIA AND FAILURE ASSESSMENT DIAGRAM PROCEDURE K. Hasegawa and K. Miyazaki, Hitachi, Ltd. (Hitachi-shi JAPAN); G. M. Wilkowski, Engineering Mechanics Corporation of Columbus (Columbus, OH USA); D. A. Scarth, Kinectrics Inc. (Toronto, Ontario CANADA)
SESSION 2.3M (MF- 03)
Tuesday, July 22, 2:00 PM - 3:45 PM,
SERVICE EXPERIENCE IN OPERATING NUCLEAR PLANTS
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 463, FLAW EVALUATION, SERVICE EXPERIENCE AND RELIABILITY
Developed by: W. H. Bamford, Westinghouse (Pittsburgh, PA, USA); D. K. Rodgers, Atomic Energy of Canada, Ltd. (Chalk River, Ontario CANADA) Chair: W. H. Bamford, Westinghouse (Pittsburgh, PA USA)
Vice Chair: D. K. Rodgers, Atomic Energy of Canada, Ltd. (Chalk River, Ontario CANADA)
THE EMBEDDED FLAW PROCESS FOR REPAIR OF REACTOR VESSEL HEAD PENETRATIONS AND ITS APPLICATION AT NORTH ANNA UNIT 2 W. H. Bamford, Westinghouse Electric Company (Pittsburgh PA, USA), L. L. Spain, Dominion Generation (Richmond, VA USA), R. E. Gold, W. R. Gahwiller, and J. P. Lareau, Westinghouse Electric Company (Pittsburgh PA, USA)
INSPECTION AND REPLACEMENT OF THE NORTH ANNA UNIT 2 RV HEAD L. Spain, Dominion Energy (Glen Allen, VA USA); W. H. Bamford, Westinghouse Electric Company (Pittsburgh, PA USA)
PRESSURE PROTECTION EVALUATION PROGRAM AT SAVANNAH RIVER SITE J. K. Chan and J. W. Ramsey, Westinghouse Savannah River Company (Aiken, SAC USA)
A FRACTURE MECHANICS EVALUATION OF BWR SHROUD MID-CORE HORIZONTAL WELD TO JUSTIFY CONTINUED OPERATION H. Mehta, General Electric Nuclear Energy (San Jose, CA USA); G. Inch and S. Dhar, Constellation Energy Group (Lycoming, NY USA)
SESSION 2.3N (FSI- 02F)
Tuesday, July 22, 2:00 PM - 3:45 PM,
SYMPOSIUM ON FLOW-INDUCED VIBRATION: VIBRATION AND ACOUSTICS IN PIPING SYSTEMS
Sponsored by: The Fluid-Structure Interaction Committee
Published in PVP Vol. 465, FLOW-INDUCED VIBRATION-2003
Developed by: M. J. Pettigrew, École Polytechnique (Montréal, QC CANADA); F. L. Eisinger, Foster Wheeler Corporation (NJ USA); B. A. W. Smith, Atomic Energy of Canada (Chalk River, Ontario CANADA)
Chair: F. L. Eisinger, Foster Wheeler Corporation (NJ USA)
Vice Chair: P. Moussou, EDF (Clamart, FRANCE) ACOUSTIC TRANSFER MATRIX DETERMINATION OF A PUMP USING REDUNDANT SENSORS Y. Han, B. A. W. Smith, and B. V. Luloff, Atomic Energy of Canada, Ltd. (Chalk River, Ontario CANADA)
THE SCALING OF PRESSURE FLUCTUATIONS FROM EQUAL-TEE PIPING COMPONENTS FOR IN-PLANT NOISE PREDICTION D. G. Karczub, SVT-Engineering Consultants (AUSTRALIA); A. C. Fagerlund and F. W. Catron, Fisher Controls International (Marshalltown, Iowa USA)
A PERFORATED CONNICAL STRAINER AS AN EXAMPLE OF AN ACOUSTIC NOISE GENERATOR R. W. Motriuk, Arcus Solutions Inc. (Calgary, CANADA)
DYNAMIC SUPPORT IN PIPING SYSTEMS - A NOVEL DESIGN BASED ON AUTOMOTIVE SHOCK ABSORBERS R. W. Motriuk, Arcus Solutions Inc. (Calgary, CANADA); E. Mikulcik, Sagittar Inc. (Calgary, CANADA)
SESSION 2.3O (FSI- 01G)
Tuesday, July 22, 2:00 PM - 3:45 PM,
FLUID-STRUCTURE COUPLING ANALYSIS - I
Sponsored by: Fluid Structure Interaction Committee
Published in PVP Vol. 460, 7TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGIES IN FLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS- 2003
Developed by: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA); M. Fischer, Technical Consultant (München, GERMANY); A. E. Holdo, University of Hertfordshire (Herts, UK); S. Itoh, Kummamoto University (Kumamoto, JAPAN); M. Souli, Université de Lille (Lille, FRANCE)
Chair: E. Longatte, EDF (Chatou FRANCE)
Vice Chair: J.Gabrys, The Boeing Company (Philadelphia, PA, USA)
QUALITATIVE EXPERIMENTAL STUDY ABOUT THE SAFETY INJECTION IN THE COLD LEG OF A REACTOR PRESSURE VESSEL (S) T. Bichet, A. Martin, and F. Beaud, EDF Research and Development (Chatou, FRANCE)
STEAM GENERATOR TUBE VIBRATIONS: EXPERIMENTAL DETERMINATION VERSUS ALE COMPUTATION OF FLUIDELASTIC FORCES (S) Z. Bendjeddou, E. Longatte and A. Adobes, EDF Research and Development Division (Chatou, FRANCE); M. Souli, University of Lille (Lille, FRANCE)
ALE AND FLUID/STRUCTURE INTERACTION IN LSDYNA (S) M. Souli, and A. Sofiane, University of Lille (Lille, FRANCE); L. Olovson, Livermore Software Technology Corporation (Livermore, CA USA)
SESSION 2.3P
Tuesday, July 22, 2:00 PM - 3:45 PM, Gold Assembly
SOFTWARE DEMONSTRATION FORUM - III
Sponsored by: The PVP Division Conference Committee
Developed by: J. F. Cory, Jr., EDS PLM Solutions (Milford, OH USA)
Participants:
Codeware, www.codeware.com Advanced Technology Corporation, www.atc-ssm.com COADE, www.COADE.com TECHStreet, www.techstreet.com CC Technologies, www.cctechnologies.com Computer Engineering, www.computereng.com ABS Consulting Group, Inc.,www.abs-jbfa.com Finglow Ltd, www.finglow.co.uk ATDAS CD adapco Group, www.cd-adapco.com Westinghouse Electric Company, LLC, www.westinghouse.com ANSYS CFX, www.Ansys.com The Equity Engineering Group, www.equityeng.com Structural Reliability Technology, www.srt-boulder.com CEA Systems, www.cea-int.com Stevenson and Associates, www.vecsa.com
Block 2.4: Tuesday, July 22 (4:00 PM - 5:45 PM)
SESSION 2.4B (CS- 02B, MF-10)
Tuesday, July 22, 4:00 PM - 5:45 PM, ENVIRONMENTAL FATIGUE ISSUES IN THE ASME B&PV CODE - II
Sponsored by: Codes and Standards Committee and Materials and Fabrication Committee
Published in PVP Vol. 453, PRESSURE VESSELS AND PIPING CODES AND STANDARDS - 2003
Developed by: D. P. Jones, Bechtel Bettis, Inc. (Pittsburgh, PA USA); M. Higuchi, IHI (Yokohama, JAPAN); H. Mehta, GE (San Jose, CA USA); S. Yukawa, Consultant (Boulder, CO USA)
Chair: H. Mehta, GE (San Jose, CA USA)
Vice Chair: M. Higuchi, IHI (Yokohama, JAPAN)
STATISTICAL ANALYSIS OF IN-AIR AND IN-WATER FATGUE TEST DATA OF AUSTENTIC STAINLESS STEELS AND FERRITIC STEELS Y. Takahashi, Central Research Institute of Electric Power Industry (Tokyo, JAPAN); T. Nakamura, The Kansai Electric Power Company (Osaka, JAPAN)
REVISED FATIGUE CRACK GROWTH RATE OF MEDIUM AND LOW SULFUR FERRITIC STEELS IN PRESSURIZED WATER REACTOR PRIMARY WATER ENVIRONMENTS E. D. Eason and E. E. Nelson, Modeling and Computing Services, LLC (Boulder, CO USA); G. Heys, Nuclear Installations Inspectorate (Bootle, UK)
CONSIDERATION OF ENVIRONMENTAL FATIGUE IN THE ASME CODE FOR CARBON AND LOW-ALLOY STEEL COMPONENTS S. Rosinski, EPRI (Charlotte, NC USA); Arthur F. Deardorff, Structural Integrity Associates (San Jose, CA USA); R. E. Nickell, Applied Science & Technology (Poway, CA USA)
SESSION 2.4C (CT- 04D)
Tuesday, July 22, 4:00 PM - 5:45 PM,
ANALYSIS OF BOLTED JOINT - IV
Sponsored by: Computer Technology Committee
Published in PVP Vol. 457, ANALYSIS OF BOLTED JOINTS - 2003 Developed by: A. Bouzid, Ecole de Technologie Superieure (Montreal, QC CANADA); T. Sawa, University of Yamanashi (Yamanashi, JAPAN); H. Kockelmann, University of Stuttgart (Stuttgart, GERMANY)
Chair: J. R. Payne, JPAC (Long Valley, NJ USA)
Vice Chair: H. Kockelmann, University of Stuttgart (Stuttgart, GERMANY)
ON THE USE OF DUAL KRIGING INTERPOLATION FOR THE DETERMINATION OF THE GASKET STRESS DISTRIBUTION IN BOLTED JOINTS A. Bouzid and H. Champliaud, Ecole de Technologie Superieure (Montreal, Quebec CANADA)
FEM STRESS ANALYSIS AND SEALING PERFORMANCE IN PIPE FLANGE CONNECTIONS WITH GASKETS SUBJECTED TO AND EXTERNAL BENDING MOMENT (CASE WHERE INTERNAL FLUID IS LIQUID) T. Sawa and M. Matsumoto, University of Yamanashi (Yamanashi, JAPAN); F. Ando, Chiyoda Advanced Solutions Corporation (Yokohama, JAPAN)
WEB-ENABLED DATABASE FOR GASKET PARAMETERS H. H. Over and JRC Petten (NETHERLAND); A. Igelmund, IRTA, (GERMANY); H. Zerres and Y. Gouérout, ASE (Cambridge, UK); H. Kockelmann, University of Stuttgart (Stuttgart, GERMANY)
EFFECT OF CREEP-RELAXATION CHARACTERISTICS OF GASKETS ON THE BOLT LOADS OF GASKETED JOINTS T. Kobayashi, Numazu College of Technology (Shizuoka, JAPAN); T. Nishida and Y. Yamanaka, Nippon Valqua Industries, Ltd. (Osaka, JAPAN)
SESSION 2.4E (DA- 03B)
Tuesday, July 22, 4:00 PM - 5:45 PM,
DESIGN AND ANALYSIS OF VESSELS AND COMPONENTS - II
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 459, DESIGN AND ANALYSIS METHODS AND FITNESS FOR SERVICE EVALUATIONS FOR PRESSURE VESSELS AND COMPONENTS
Developed by: D. H. Martens, Black & Veatch Pritchard Inc. (Overland Park, KS USA); M. A Porter, Dynamic Analysis (Lawrence, KS USA)
Chair: D. H. Martens, Black & Veatch Pritchard Inc. (Overland Park, KS USA) Vice Chair: M. A Porter, Dynamic Analysis (Lawrence, KS USA)
THREE TURNAROUND HEAT TREATING STUDIES J. Taapgepera, M. Clift, and K. Marden, Valero Benicia Refinery (Benicia, CA USA)
THE USE OF FEM IN THE REVAMPING OF EXISTING SYSTEMS M. A Porter, Dynamic Analysis (Lawrence, KS USA); D. H. Martens, Black & Veatch Pritchard Inc. (Overland Park, KS USA)
THERMO- HYDRAULICAL ANALYSIS IN AN ASSEMBLY REPRESENTATIVE OF A FEEDWATER NOZZLE X. Boissiere and C. Laine, DCN Establissement de Nantes Indret (La Montagne, FRANCE); L. Doubliez, Universite de Nantes (Nantes FRANCE) PREDICITIONS OF RESIDUAL STRESSES IN THE MECHANICAL ROLL EXPANSION OF HX TUBES INTO TEMA GROOVES D. K. Williams, Sharoden Engineering Consultants, P.A. (Matthews, NC USA)
SESSION 2.4F (OAC- 04B, CT- 07)
Tuesday, July 22, 4:00 PM - 5:45 PM,
RISK AND RELIABILITY TOPICS - II
Sponsored by: Operations, Applications & Components Committee and Computer Technology Committee
Published in PVP Vol. 458, COMPUTER TECHNOLOGY AND APPLICATIONS
Developed by: J. A. Farquharson, ABS Consulting (Knoxville, TN USA)
Chair: J. A. Farquharson, ABS Consulting (Knoxville, TN USA)
Vice Chair: F.L. Cho, Illinois Department of Nuclear Safety (Springfield, IL USA)
ENHANCING PROBABILISTIC SAFETY ASSESSMENT METHODOLOGY FOR REACTOR SAFETY ANALYSIS: PART 1 - A PARADIGM OF NUCLEAR ACCIDENT MEASURE F. L. Cho, Illinois Department of Nuclear Safety (Springfield, IL USA)
ROLE OF HUMAN FACTOR IN THE LIFE CYCLE AND SAFETY OF PRESSURE VESSELS AND PIPING S. A. Timashev, Science & Engineering Center, Ural Branch, Russian Academy of Sciences (Ekaterinburg, RUSSIA) RISK ASSESSMENT FOR DAMAGED PRESSURE TANK CARS S. Kirkpatrick, Applied Research Associates, Inc. (Mountain View, CA, USA) and R. W. Klopp, Exponent Failure Analysis Associates (Menlo Park, CA USA)
SAFETY ANALYSIS AND RISK ASSESSMENT FOR PRESSURE SYSTEMS B. Blyukher, Health and Safety Department, Indiana State University (Terre Haute, IN USA)
SESSION 2.4G (DA- 04D)
Tuesday, July 22, 4:00 PM - 5:45 PM,
FRACTURE ANALYSIS - I
Sponsored by: DESIGN & ANALYSIS Committee
Published in PVP Vol. 461, FATIGUE, FRACTURE AND DAMAGE ANALYSIS - 2003
Developed by: D. Moinereau, EDF (Cedex FRANCE); K. Yoon, Framatome, ANP (Lynchburg, VA USA); J.-B. Choi, Sungkyunkwan University (KOREA)
Chair: S. Marie, CEA (Saclay, FRANCE)
Vice Chair: T. Dickson, Oak Ridge National Laboratory (Oak Ridge, TN USA)
MECHANICAL ANALYSIS OF UNDERCLAD CRACKS IN REACTOR PRESSURE VESSEL NOZZLES N. Verdière, EDF (Saint-Denis, FRANCE); H. Churier-Bossennec, EDF (Villeurbanne, FRANCE); F. Champigny, EDF (Saint-Denis, FRANCE)
ASSESSMENT OF POTENTIAL DAMAGE TO DUCTILE CAST IRON CASK AS A RESULT OF EXCEPTIONAL IMPACT LOADING N. Bonora and A. Ruggiero, University of Cassino (Cassino ITALY)
ELASTIC-PLASTIC FRACTURE MECHANICS ASSESSMENT OF TEST DATA FOR CIRCUMFERENTIAL CRACKED PIPES N.S. Huh, D.J. Shim, Y.J. Kim, and Y.J. Kim, Sungkyunkwan University (Suwon, Kyunggi-do KOREA)
SESSION 2.4J (SE- 04)
Tuesday, July 22, 4:00 PM - 5:45 PM, SEISMIC EVALUATION OF SYSTEMS, STRUCTURES, AND COMPONENTS - I
Sponsored by: The Seismic Engineering Committee
Published in PVP Vol. 466, SEISMIC ENGINEERING - 2003
Developed by: M. E. Nitzel, Idaho National & Environmental Laboratory (Idaho Falls, ID USA)
Chair: M. E. Nitzel, Idaho National & Environmental Laboratory (Idaho Falls, ID USA)
Vice Chair: G. Roussel, AVN (Brussels, BELGIUM)
A COMPREHENSIVE REVIEW OF ULTIMATE AND ALLOWABLE STRESS DESIGN METHODOLOGIES FOR EXTERNAL LOAD CALCULATION OF PETROCHEMICAL EQUIPMENT: EUROCODE 8 VERSUS ASME CODE. C. Botsis, G. Anagnostidis, and N. Kokavesis, Asprofos Engineering S. A. (Athens, GREECE)
SEISMIC DESIGN OF CYLINDRICAL AND SPHERICAL STORAGE TANKS ACCORDING TO API AND EUROCODE: A DIFFICULT MERGE IN DESIGN PHILOSOPHIES C. Botsis, G. Anagnostidis, and N. Kokavesis, Asprofos Engineering S. A. (Athens, GREECE)
PERFORMANCE GOAL-BASED SEISMIC DESIGN STANDARDS FOR CRITICAL FACILITIES IN THE UNITED STATES Q. Hossain, Lawrence Livermore National Laboratory (Livermore, CA USA)
SESSION 2.4K (HPT- 02)
Tuesday, July 22, 4:00 PM - 5:45 PM,
NEW DEVELOPMENTS IN HIGH PRESSURE ANALYSIS
Sponsored by: High Pressure Technology Committee
PUBLISHED IN PVP VOL. 455, HIGH PRESSURE TECHNOLOGY: 2003 SHAPING HIGH PRESSURE TECHNOLOGY FOR THE FUTURE
Developed by: T. Kovach. Autoclave Engineers (Erie, PA USA)
Chair: T. Kovach, Autoclave Engineers (Erie, PA USA) Vice Chair: R. Mielnik, Autoclave Engineers (Erie, PA USA)
STRESS INTENSITY FACTORS FOR INTERNAL STRAIGHT AND CURVED-FRONTED CRACKS IN PRESSURIZED THICK CYLINDERS A. Parker, Royal Military College of Science, Cranfield University (East Sussex, ENGLAND); C. L. Tan and C. Cassell, Carleton University (Ottawa CANADA)
THE FAVORABLE EFFECT OF AUTOFRETTAGE ON UNIFORM ARRAYS OF 3-D UNEQUAL-DEPTH CRACKS IN A THICK-WALLED CYLINDRICAL PRESSURE VESSEL M. Perl and B. Ostraich, Ben-Gurion University (Beer-Sheva, ISREAL)
STRESS INTENSITY CORRECTION FACTORS FOR RADIAL-LONGITUDINAL, SURFACE CRACKS IN THICK-WALLED CYLINDERS A. Kiciak, General Electric(Warsaw POLAND); D. J. Burns, Conestoga College (Kitchener, Ontario CANADA); G. Glinka Department of Mechanical Engineering, University of Waterloo (Waterloo, Ontario CANADA)
EFFECT OF BLEND RADIUS ON STRESS CONCENTRATION FACTOR OF CROSSBORED HOLES IN THICK WALLED PRESSURE VESSELS D. T. Peters, Autoclave Engineers (Erie, PA USA)
SESSION 2.4L (MF- 07B)
Tuesday, July 22, 4:00 PM - 5:45 PM,
PANEL SESSION: PRESSURIZED THERMAL SHOCK
Sponsored by: The Materials and Fabrication Committee
Developed by: M. T. Kirk, U. S. NRC (Rockville, MD USA) K. Yoon, Framatome ANP, (Lynchburg, VA USA)
Chair: M. T. Kirk, U. S. Nuclear Regulatory Commission (Rockville, MD USA)
Vice Chair: K. Yoon, Framatome ANP, (Lynchburg, VA USA)
PANELISTS:
T. Dickson, Oak Ridge National Laboratory (Oak Ridge, TN USA) C. Faidy, Electricity de France (Villeurbanne FRANCE) M. Natishan, Phoenix Engineering Associates, Inc. (Sykesville, MD USA) SESSION 2.4M (MS- 01)
Tuesday, July 22, 4:00 PM - 5:45 PM,
PANEL SESSION: M&S OPPORTUNITIES IN HYDROGEN AS A FUEL
Sponsored by: Materials and Structures Group
Developed by: D. E. Bray, Don E. Bray, Inc. (College Station, TX USA); W. J. Bees, BWX Technologies, Inc. (Barberton, OH USA)
Chair: D. E. Bray, Don E. Bray, Inc. (College Station, TX USA)
Vice Chair: W. J. Bees, BWX Technologies, Inc. (Barberton, OH USA)
PRESENTATIONS:
NAVAL APPLICATIONS OF ADVANCED POWER SYSTEMS (FUEL CELL TECHNOLOGY) J. Pizzino, Naval Surface Warfare Center (Philadelphia, PA USA)
ASME C&S ACTIVITIES FOR HYDROGEN INFRASTRUCTURE J. Koehr, ASME Codes and Standards Technology Institute (New York, NY USA)
PANELISTS:
C. Jaske, CC Technologies (Dublin, OH USA) H. Chung, MITEC International, Inc. (Naperville, IL USA) W. T. Springer, University of Arkansas (Fayetteville, AR USA) W. A. Curtin, Brown University (Providence, RI USA)
SESSION 2.4N (FSI- 02G)
Tuesday, July 22, 4:00 PM - 5:45 PM,
SYMPOSIUM ON FLOW-INDUCED VIBRATION: SELECTED TOPICS IN FLUID- STRUCTURE INTERACTION
Sponsored by: The Fluid-Structure Interaction Committee
Published in PVP Vol. 465, FLOW-INDUCED VIBRATION-2003
Developed by: M. J. Pettigrew, École Polytechnique (Montréal, QC CANADA); D. S. Weaver, McMaster University (Hamilton, Ontario CANADA) Chair: J. Antunes, Instituto Technologico Nuclear (Lisbon, PORTUGAL)
Vice Chair: F. Inada, CRIEPI (Tokyo, JAPAN)
FLUIDELASTIC INSTABILITY OF FLEXIBLE TUBULAR CYLINDERS SUBJECTED TO TWO-PHASE INTERNAL FLOW C. Monette and M. J. Pettigrew, Ecole Polytechnique (Montreal, QC CANADA)
MODEL TESTS FOR NON-ECCENTRICITY DYNAMIC INSTABILITY CLOSELY RELATED TO FOLSOM DAM TAINTER-GATE FAILURE K. Anami, Kyoto University (Kyoto, JAPAN); N. Ishii, Osaka Electro-Communication University (Osaka, JAPAN)
FLOW INDUCED VIBRATION OF FLEXIBLE DISK SUBJECTED TO SWIRLING FLOW M. Watanabe, N. Wakita, and T. Takahashi, Aoyama Gakuin University (Tokyo, JAPAN)
A THEORETICAL SERIES SOLUTION FOR THE DYNAMICS OF FINITE-LENGTH BEARINGS AND SQUEEZE-FILM DAMPERS J. Antunes, Institute of Nuclear Technology (PORTUGAL); M. Moreira, Polytechnic Institute of Setubal (PORTUGAL); P. Piteau, Commissariat à l’Énergie Atomique (Saclay, FRANCE)
SESSION 2.4O (FSI- 01H)
Tuesday, July 22, 4:00 PM - 5:45 PM,
FLUID-STRUCTURE COUPLING ANALYSIS - II
Sponsored by: Fluid Structure Interaction Committee
Published in PVP Vol. 460, 7TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGIES IN FLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS - 2003
Developed by: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA); M. Fischer, Technical Consultant (München, GERMANY); A. E. Holdo, University of Hertfordshire (Herts, UK); S. Itoh, Kummamoto University (Kumamoto, JAPAN); M. Souli, Université de Lille (Lille, FRANCE)
Chair: J.Gabrys, The Boeing Company (Philadelphia, PA USA)
Vice Chair: E. Longatte EDF (Chatou, FRANCE)
DAMPING EFFECT IN FLUID-STRUCTURE INTERACTIONS: APPLICATION TO SLAMMING PROBLEM N.Aquelet and M. Souli, University of Lille (Lille, FRANCE) HIGH EXPLOSIVE IMPACT ANALYSIS USING LS-DYNA M. Kamel, N.Aquelet, and M. Souli, University of Lille (Lille, FRANCE)
FLOW-INDUCED VIBRATION IN SPIRAL FINNED GAS TUBE BUNDLE HEAT EXCHANGERS M. Fischer, Independent Technical Consultant (München, GERMANY)
SIMULATION OF THE ULTRASONIC DIFFRACTION IN VISCOUS FLUIDS N. Bouaoua, A. Alia, and H. Djelouah, Faculté de Physique, U.S.T.H.B, (Alger, ALGERIA)
SESSION 2.4P
Tuesday, July 22, 4:00 PM - 5:45 PM, Gold Assembly
SOFTWARE DEMONSTRATION FORUM - IV
Sponsored by: The PVP Division Conference Committee
Developed by: J. F. Cory, Jr., EDS PLM Solutions (Milford, OH USA)
Participants:
Codeware, www.codeware.com Advanced Technology Corporation, www.atc-ssm.com COADE, www.COADE.com TECHStreet, www.techstreet.com CC Technologies, www.cctechnologies.com Computer Engineering, www.computereng.com ABS Consulting Group, Inc.,www.abs-jbfa.com Finglow Ltd, www.finglow.co.uk ATDAS CD adapco Group, www.cd-adapco.com Westinghouse Electric Company, LLC, www.westinghouse.com ANSYS CFX, www.Ansys.com The Equity Engineering Group, www.equityeng.com Structural Reliability Technology, www.srt-boulder.com CEA Systems, www.cea-int.com Stevenson and Associates, www.vecsa.com
WEDNESDAY, July 23 Block 3.1: Wednesday, July 23 (8:30 AM - 10:15 AM)
SESSION 3.1A (TUT- 03A)
Wednesday, July 23, 8:30 AM - 10:15 AM,
TUTORIAL: THE ASME HPS SECTION 6000 “HAZARDOUS RELEASE PROTECTION”: PROTECTION WORKING WITH PERFORMANCE TO SET A STANDARD FOR RISK BASED SAFETY OF PRESSURE SYSTEMS - I
Sponsored by: The PVP Division Conference Committee
Presented by: S. J. Brown, Quest Engineering & Development Corp. (Humble, TX USA)
SESSION 3.1B (CS- 02C, MF-11)
Wednesday, July 23, 8:30 AM - 10:15 AM,
ENVIRONMENTAL FATIGUE ISSUES IN THE ASME B&PV CODE - III
Sponsored by: Codes and Standards Committee, and Materials and Fabrication Committee
Published in PVP Vol. 453, PRESSURE VESSELS AND PIPING CODES AND STANDARDS - 2003
Developed by: D. P. Jones, Bechtel Bettis, Inc. (Pittsburgh, PA USA); M. Higuchi, IHI (Yokohama, JAPAN); H. Mehta, GE (San Jose, CA USA); S. Yukawa, Consultant (Boulder, CO USA)
Chair: D. P. Jones, Bechtel Bettis, Inc. (Pittsburgh, PA USA)
Vice Chair: M. Higuchi, IHI (Yokohama, JAPAN)
DEVELOPMENT OF WATER ENVIRONMENT FATIGUE DESIGN CURVE FOR AUSTENTIC STAINLESS STEELS T. R. Leax, Bechtel Bettis, Inc. (West Mifflin, PA USA)
PROBABILISTIC ANALYSIS OF 60-YEAR ENVIRONMENTAL FATIGUE EFFECTS FOR REACTOR COMPONENTS A. F. Deardorff, Structural Integrity Associates (San Jose, CA USA); D. O. Harris and D. Dedhia, Engineering Mechanics Technology (San Jose, CA USA); S. Rosinski, EPRI (Charlotte, NC USA)
GUIDELINES ON ENVIRONMENTAL FATIGUE EVALUATION FOR LWR COMPONENTS T. Nakamura, The Kansai Electric Power (Osaka, JAPAN); I. Saito, Mitsubishi Heavy Industries, Ltd. (Kobe, JAPAN); Y. Asada, Central Research Institute of Electric Power Industry (Tokyo, JAPAN)
REVIEW OF MARGINS NEEDED TO DEVELOP FATIGUE DESIGN CURVES FROM LABORATORY TEST DATA W. A. Van Der Sluys, Consultant (Eustis, FL USA)
SESSION 3.1C (CT- 04E)
Wednesday, July 23, 8:30 AM - 10:15 AM,
ANALYSIS OF BOLTED JOINT - V
Sponsored by: Computer Technology Committee
Published in PVP Vol. 457, ANALYSIS OF BOLTED JOINTS - 2003
Developed by: A. Bouzid, Ecole de Technologie Superieure (Montreal, QC CANADA); T. Sawa, University of Yamanashi (Yamanashi, JAPAN); H. Kockelmann, University of Stuttgart (Stuttgart, GERMANY)
Chair: T. Sawa, University of Yamanashi (Yamanashi, JAPAN)
Vice Chair: A. Bouzid, Ecole de Technologie Superieure (Montreal, QC CANADA)
STANDARDIZATION RELATED TO THE PRESSURE EQUIPMENT DIRECTIVE WITH A FOCUS ON BOLTED JOINTS A. Hövel and P. Hecker, DIN, (Cologne, GERMANY)
FINITE ELEMENT ANALYSIS OF THE THERMAL AND MECHANICAL BEHAVIORS OF BOLTED JOINT T. Fukuoka, Kobe University of Mercantile Marine (Kobe, JAPAN)
AN EXAMINATION OF B16.5 FLANGED JOINTS USING THE CEN CALCULATION PROCEDURE EN 1591 (Presentation Only) H. Zerres, ASE (Cambridge, UK); J.R. Payne, JPAC (Long Valley, NJ USA) CONSIDERATION ON THE REPRESENTATIONS OF SEALING BEHAVIOR OF GASKETS (EFFECTS OF THE INTERNAL PRESSURE AND THE GASKET WIDTH) T. Kobayashi, Numazu College of Technology (Shizuoka, JAPAN); T. Nishida and Y. Yamanaka, Nippon Valqua Industries, Ltd. (Osaka , JAPAN)
SESSION 3.1D (OAC- 04C, CT- 08)
Wednesday, July 23, 8:30 AM - 10:15 AM,
PANEL SESSION: RISK BASED VS DETERMINISTIC APPROACH
Sponsored by: Operations, Applications and Components Committee and Computer Technology Committee
Published in PVP Vol. 458, COMPUTER TECHNOLOGY AND APPLICATIONS
Developed by: J. A. Farquharson, ABS Consulting (Knoxville, TN USA)
Chair: J. A. Farquharson, ABS Consulting (Knoxville, TN USA)
Vice Chair: A. Smith, Savannah River Plant, Aiken, SC USA)
PANELISTS:
J. A. Farquharson, ABS Consulting (Knoxville, TN USA) A. Smith, Savannah River Plant, Aiken, SC USA) K. Dungan, Risk Technologies LLC (Knoxville, TN USA) R. Smith, Packaging Technology, Inc. (Richland, WA USA)
SESSION 3.1E (OAC- 03C)
Wednesday, July 23, 8:30 AM - 10:15 AM,
TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - III: CORROSION ISSUES
Sponsored by: Operations, Applications & Components Committee
Published in PVP Vol. 467, TRANSPORTATION, STORAGE AND DISPOSAL OF RADIOACTIVE MATERIALS
Developed by: R. S. Hafner and R. B. Rebak, Lawrence Livermore National Laboratory (Livermore, CA USA); M. E. Wangler, International Atomic Energy Agency (Vienna, AUSTRIA) Chair: M. R. Feldman, BWXT Y-12, L.L.C. (Oak Ridge, TN USA)
Vice Chair: M. Greiner, University of Nevada (Reno, NV USA)
MODELING OF STRESS CORROSION CRACKING FOR HIGH LEVEL RADIOACTIVE- WASTE PACKAGES S. C. Lu, Lawrence Livermore National Laboratory (Livermore, CA USA); G. M. Gordon, Framatome ANP (Las Vegas, NV USA); P. L. Andresen, GE Global Research (Schenectady, NY USA); M. L. Herrera, Structural Integrity Associates (San Jose, CA USA)
ANODIC BEHAVIOR OF ALLOY 22 IN CALCIUM CHLORIDE AND IN CALCIUM CHLORIDE PLUS CALCIUM NITRATE BRINES K. J. Evans, S. D. Day, G. O. Ilevbare, M. T. Whalen, K. J. King, G. A. Hust, L. L. Wong, J. C. Estill and R. B. Rebak, Lawrence Livermore National Laboratory (Livermore, CA USA)
CORROSION RATE OF ALLOY 22 IN OXALIC ACID SOLUTIONS (Presentation Only) S. D. Day, K. J. King, M. T. Whalen, J. C. Estill and R. B. Rebak, Lawrence Livermore National Laboratory (Livermore, CA USA)
CORROSION CHARACTERISTICS OF TITANIUM ALLOYS IN MULTI-IONIC ENVIRONMENTS L. L. Wong, J. C. Estill, D. V. Fix and R. B. Rebak, Lawrence Livermore National Laboratory (Livermore, CA USA)
SESSION 3.1F (DA- 01B)
Wednesday, July 23, 8:30 AM - 10:15 AM,
DESIGN AND ANALYSIS OF PIPING COMPONENTS - II
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 469, DESIGN AND ANALYSIS OF PRESSURE VESSELS AND PIPING: IMPLEMENTATION OF ASME B31, FATIGUE, ASME SECTION VIII, AND BUCKLING ANALYSES
Developed by: J. McCabe, Electric Boat Corporation (Groton, CT USA); C. Basavaraju, Bechtel Corporation (Frederick, MD USA); T. Seipp, Fluor Canada Ltd. (Calgary, AB CANADA)
Chair: J. McCabe, Electric Boat Corporation (Groton, CT USA)
Vice Chair: T. Seipp, Fluor Canada Ltd. (Calgary, AB CANADA) DETERMINATION OF DISCHARGE COEFFICIENTS FOR HYDRAULIC SPARGER DESIGN W. Gregg, D. Werth, and C. Frizzel, Clemson University (Clemson, SC USA)
EFFECTS OF INLINE ROTATING COMPONENT ON PIPING SYSTEM DYNAMIC CHARACTERISTICS Z. Ibrahim, Sargent & Lundy LLC (Chicago, IL, USA)
DEFORMATION RELAXATION: A FINITE ELEMENT OPTIMIZATION METHOD FOR TEE S. Wang and J. Zhao, Xia’an University of Technology (Shaanxi P. R. CHINA)
SESSION 3.1G (DA- 04E)
Wednesday, July 23, 8:30 AM - 10:15 AM,
FRACTURE ANALYSIS - II
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 461, FATIGUE, FRACTURE AND DAMAGE ANALYSIS - 2003
Developed by: D. Moinereau, EDF (Cedex FRANCE); K. Yoon, Framatome, ANP (Lynchburg, VA USA); J.-B. Choi, Sungkyunkwan University (KOREA)
Chair: D. Moinereau, EDF (Cedex FRANCE),
Vice Chair: S. Marie, CEA, (Saclay, FRANCE)
A MICROMECHANICS APPROACH TO ASSESS DUCTILE CRACK INITIATION IN DAMAGED PIPELINES C. Ruggieri and F.F. Santos, University of Sao Paulo (Sao Paulo, BRAZIL); M. Ohata and M. Toyoda, Osaka University (Osaka, JAPAN)
THE ENERGY APPROACH OF ELASIC-PLASTIC FRACTURE MECHANICS APPLIED TO THE ANALYSIS OF THE WARM PRE-STRESS EFFECT Y. Wadier, EDF (Clamar, FRANCE), M. Bonnamy, AUSY (Issy les Moulineaux, FRANCE)
THE BEHAVIOUR OF A PROCESS ZONE AT THE ROOT OF A DEEP SHARP FLAW FOR MODE I LOADING E. Smith, University of Manchester (Manchester, UK)
TESTS AND CALCULATIONS OF THERMOMECHANICAL SHOCKS IN THE BRITTLE/DUCTILE TRANSITION ZONE OF A PRESSURE VESSEL STEEL M. Reytier and S. Chapuliot, CEA (Gif-sur-Yvette FRANCE); M. Nedelec, IRSN (Fontenay aux Roses, FRANCE)
SESSION 3.1J (SE- 05)
Wednesday, July 23, 8:30 AM - 10:15 AM,
SEISMIC EVALUATION OF SYSTEMS, STRUCTURES, AND COMPONENTS - II
Sponsored by: The Seismic Engineering Committee
Published in PVP Vol. 466, SEISMIC ENGINEERING - 2003
Developed by: S. C. Lu and Q. Hossain, Lawrence Livermore National Laboratory (Livermore, CA USA)
Chair: Q. Hossain, Lawrence Livermore National Laboratory (Livermore, CA USA)
Vice Chair: S. C. Lu, Lawrence Livermore National Laboratory (Livermore, CA USA)
AN UPDATE ON THE IMPLEMENTATION OF EXPERIENCE BASED SEISMIC EQUIPMENT QUALIFICATION IN THE ASME QME-1 standard T. M. Adams, Stevenson and Associates (Cleveland, OH, USA); D. Moore, Southern Company Services (Birmingham, AL USA); G. Antaki, Westinghouse Savannah River CO. (Aiken, SC USA); K. Manoly, USNRC (Washington DC USA); P. Baughman, ABS Consulting (Strathman, NH USA); R. Burns, Texas Utilities (Glenrose, TX USA); J. Richards, Duke Power Company (Charlotte, NC USA); and R. Stark, MPR Associates (Alexandria, VA USA)
A CRITICAL COMPARISON OF SEISMIC QUALIFICATION REQUIREMENTS FOR SAFETY EQUIPMENT IN VARIOUS CODES AND STANDARDS G. Abatt and M. Meyer, M&D Professional Services Inc. (Richland, WA USA), and Q. Hossain, Lawrence Livermore National Laboratory (Livermore, CA USA)
A DIRECT METHOD ON THE ANALYSIS OF STEADY STATE RESIDUAL STRAINS IN A STEEL JOINT SUBJECTED TO CYCLIC LOADS C.-C. Yu, National University of Kaohsiung (Kaohsiung, TAIWAN); C.-T. Wu and T.-P. Chang, National Kaohsiung First University of Science and Technology (Kaohsiung, TAIWAN)
SESSION 3.1L (MF- 06A) Wednesday, July 23, 8:30 AM - 10:15 AM,
FLAW EVALUATION PROCEDURES - I
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 463, FLAW EVALUATION, SERVICE EXPERIENCE AND RELIABILITY
Developed by: C. Faidy, EDF (Villeurbanne, FRANCE)
Chair: D. A. Scarth, Kinectrics, Inc. (Toronto, Ontario CANADA)
Vice Chair: P. Dillström, Det Norske Veritas AB (Stockholm, SWEDEN)
FLAW EVALUATION PROCEDURES AND ACCEPTANCE CRITERIA FOR NUCLEAR COMPONENTS IN ASME CODE SECTION XI R. C. Cipolla, Aptech Engineering Services, Inc. (Sunnyvale, CA USA); G. H. DeBoo, Exelon Nuclear (Warrenville, IL USA); W. H. Bamford, Westinghouse Energy Center (Pittsburgh, PA USA); K. K. Yoon, Framatome ANP (Lynchburg, VA USA); K. Hasegawa, Hitachi, Ltd. (Hitachi-shi JAPAN)
DEVELOPMENTS IN THE FLAW ASSESSMENT PROCEDURES OF R6 REVISION 4 AND BS7910 R. A. Ainsworth and P. J. Budden, British Energy Generation Ltd. (Gloucester, UK); A. R. Dowling, BNFL Magnox Generation (Berkeley, UK); J. K. Sharples, Serco Assurance (Warrington, UK)
GENERAL PRESENTATION OF FRENCH CODIFIED FLAW EVALUATION PROCEDURE: RSE-M C. Faidy, EDF (Villeurbanne, FRANCE)
FLAW EVALUATION AND ALLOWABLE FLAW SIZES OF NUCLEAR PIPING IN JSME CODE K. Hasegawa, Hitachi, Ltd. (Hitachi-shi JAPAN); H. Kobayashi, Tokyo Institute of Technology (Tokyo JAPAN); K. Kashima, Central Research Institute of Electric Power Industry (Tokyo JAPAN)
SESSION 3.1M (MF- 04A)
Wednesday, July 23, 8:30 AM - 10:15 AM,
WELDING AND RESIDUAL STRESS - I
Sponsored by: The Materials and Fabrication Committee Published in PVP Vol. 464, RESIDUAL STRESS, FITNESS-FOR-SERVICE, AND MANUFACTURING PROCESSES (AND) STUDENT PAPER COMPETITION
Developed by: E. Keim, Framatome ANP GmbH Technical Center, (Erlangen, GERMANY); P. Dong, Battelle Memorial Institute (Columbus, Ohio USA); F. W. Brust, Battelle Memorial Institute (Columbus, Ohio USA)
Chair: E. Keim, Framatome ANP GmbH (Erlangen, GERMANY)
Vice Chair: Y. Yang, Battelle Memorial Institute (Columbus, OH USA)
TIME-TEMPERATURE-THICKNESS RELATIONSHIP IN STRESS RELIEF PWHT (Presentation Only) P. Dong, Battelle Memorial Institute (Columbus, OH USA); M. Prager, Pressure Vessel Research Council (New York, NY USA); D. Osage, Equity Engineering Group (Shaker Heights, OH USA)
RESIDUAL STRESSES IN A PWR DISSIMILAR METAL WELD JUNCTION (Presentation Only) N. Safa, P. Gilles, Framatome-ANP (FRANCE), J. Devaux, ESI-France Le Discover (FRANCE)
INVESTIGATION OF RESIDUAL STRESS CAUSED BY WELDING, CLADDING AND TEMPERING OF REACTOR PRESSURE VESSELS V. I. Kostylev, B. Z. Margolin, and A. Y. Varovin, CRISM (Prometey, RUSSIA); E. Keim Framatome ANP (GERMANY)
SESSION 3.1O (FSI- 01I)
Wednesday, July 23, 8:30 AM - 10:15 AM,
NEW APPLICATIONS OF SHOCK PROCESSING - I
Sponsored by: Fluid Structure Interaction Committee
Published in PVP Vol. 460, 7TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGIES IN FLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS - 2003
Developed by: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA); M. Fischer, Technical Consultant (München, GERMANY); A. E. Holdo, University of Hertfordshire (Herts, UK); S. Itoh, Kummamoto University (Kumamoto, JAPAN); M. Souli, Université de Lille (Lille, FRANCE) Chair: A. E. Holdo, University of Hertfordshire (Herts, UK)
Vice Chair: M. Fischer, Technical Consultant (München, GERMANY)
KEYNOTE: SHOCK WAVE AND BIOTECHNOLOGY S. Itoh, Kumamoto University (Kumamoto, JAPAN)
SHOCK STERILIZATION OF DRY POWDER FOODS K. Fujiwara, T. Hiroe, and M. Asakawa, Kumamoto University (Kumamoto, JAPAN)
STUDY FOR STERILIZATION TECHNOLOGY BY UNDERWATER SHOCK WAVE T. Watanabe, National Fisheries University (Shimonoseki, JAPAN); K. Harada, National Fisheries University (Yamaguchi, JAPAN); A. Takemoto and S. Itoh, Kumamoto University (Kumamoto, JAPAN)
Block 3.2: Wednesday, July 23 (10:30 AM - 12:15 PM)
SESSION 3.2A (TUT- 03B)
Wednesday, July 23, 10:30 AM - 12:15 PM,
TUTORIAL: THE ASME HPS SECTION 6000 “HAZARDOUS RELEASE PROTECTION”: PROTECTION WORKING WITH PERFORMANCE TO SET A STANDARD FOR RISK BASED SAFETY OF PRESSURE SYSTEMS - II
Sponsored by: The PVP Division Conference Committee
Presented by: S. J. Brown, Quest Engineering & Development Corp. (Humble, TX USA)
SESSION 3.2B (CS- 02D, MF-12)
Wednesday, July 23, 10:30 AM - 12:15 PM,
PANEL SESSION: ENVIRONMENTAL FATIGUE ISSUES IN THE ASME B&PV CODE
Sponsored by: Codes and Standards Committee and Materials and Fabrication Committee
Developed by: D. P. Jones, Bechtel Bettis, Inc. (Pittsburgh, PA USA); W. A. VanDer Sluys, Consultant (Eustis, FL USA) Chair: D. P. Jones, Bechtel Bettis, Inc. (Pittsburgh, PA USA)
Vice Chair: W. A. VanDer Sluys, Consultant (Eustis, FL USA)
PANELISTS:
O. K. Chopra, ANL (Argonne, IL USA) H. Mehta, GE (San Jose, CA USA) M. Higuchi, Ishikawajima-Harima Heavy Industries Co. Ltd. (Yokohama, JAPAN) W. J. O’Donnell, O’Donnell Consulting (Bethel Park, PA USA) S. T. Rosinski, EPRI (Charlotte, NC USA)
SESSION 3.2C (CT- 04F)
Wednesday, July 23, 10:30 AM - 12:15 PM,
PANEL SESSION: CURRENT FUGITIVE EMISSIONS AND FLANGE DESIGN DEVELOPMENTS
Sponsored by: The PVRC bolted Flanged Connections Committee, and The Computer Technology Committee
Developed by: A. Bouzid, Ecole de Technologie Superieure (Montreal, QC CANADA); T. Sawa, University of Yamanashi (Yamanashi, JAPAN); H. Kockelmann, University of Stuttgart (Stuttgart, GERMANY)
Chair: A. Bouzid, Ecole de Technologie Superieure (Montreal, QC CANADA)
Vice Chair: H. Kockelmann, University of Stuttgart (Stuttgart, GERMANY)
PANELISTS:
A. Bouzid, Ecole de Technologie Superieure (Montreal, Quebec, CANADA) J. Hoyes, Flexitallic (West Yorkshire, UK) T. Kobayashi, Numazu College of Technology (Shizuoka, JAPAN) H. Kockelmann, University of Stuttgart, (Stuttgart, GERMANY) J.R. Payne, JPAC (Long Valley, NJ USA) T. Sawa, University of Yamanashi (Yamanashi, JAPAN)
SESSION 3.2D (OAC- 02C)
Wednesday, July 23, 10:30 AM - 12:15 PM, MAINTENANCE AND MACHINERY HEALTH MONITORING
Sponsored by: Operations, Applications and Components Committee
Published in PVP Vol. 468, AGING MANAGEMENT AND COMPONENT ANALYSIS
Developed by: B. O. Al-Bedoor, Mechanical Engineering Department, University of Jordan (Amman, JORDAN); L. I. Ezekoye, Westinghouse Electric Co. (Pittsburgh, PA USA)
Chair: B. O. Al-Bedoor (Amman, JORDAN)
Vice Chair: L. I. Ezekoye (Pittsburgh, PA USA)
IDENTIFYING ROTATING BLADES VIBRATION FROM THE SHAFT TORSIONAL VIBRATION SIGNALS B. O. Al-Bedoor, University of Jordan, (Amman, JORDAN); Y. N. Al-Nassar, S. A. Adewusi, and L. Ghoutti, King Fahd University of Petroleum & Minerals, (Dhahran, SAUDI ARABIA)
FINITE ELEMENT STUDY ON PIEZOLECTRIC SENSORS FOR BLADE VIBRATION MEASUREMENTS M. Sunar, King Fahd University of Petroleum & Minerals, (Dhahran, SAUDI ARABIA); B. O. Al-Bedoor, University of Jordan, (Amman, JORDAN)
EFFECT OF FLUID MASS ON NON-LINEAR NATURAL FREQUENCIES OF A ROTATING BEAM A. A. Al-Qaisia, University of Jordan (Amman, JORDAN)
FINITE ELEMENT MODELING OF BLADE-ROTOR SYSTEM IN TURBOMACHINERY Y. N. Al-Nassar, King Fahd University of Petroleum & Minerals, (Dhahran, SAUDI ARABIA)
SESSION 3.2E (OAC- 03D)
Wednesday, July 23, 10:30 AM - 12:15 PM,
TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - IV: STRUCTURAL ISSUES
Sponsored by: Operations, Applications & Components Committee
Published in PVP Vol. 467, TRANSPORTATION, STORAGE AND DISPOSAL OF RADIOACTIVE MATERIALS Developed by: R. S. Hafner, Lawrence Livermore National Laboratory (Livermore, CA USA); M. E. Wangler, International Atomic Energy Agency (Vienna, AUSTRIA)
Chair: M. Greiner, University of Nevada (Reno, NV USA)
Vice Chair: W. H. Lake, ASE, Inc. (Silver Spring, MD USA)
FAILURE PRESSURE SIMULATIONS FOR 3013 INNER CAN UNDER ROOM FIRE CONDITIONS N. K. Gupta, Westinghouse Savannah River Company (Aiken, SC USA)
DEVELOPING ACCEPTANCE CRITERIA FOR ONSITE TYPE B PACKAGES BASED ON CUMULATIVE STRAIN (Presentation Only) S. S. Shiraga, L. M. Hay, and S. N. Huang, Duratek Federal Services, Inc. (Richland, WA USA)
IMPACT TESTING OF MATERIALS (Presentation Only) S. D. Snow, D. K. Morton, T. E. Rahl, R. K. Blandford, and T. J. Hill, Idaho National Engineering & Environmental Laboratory (Idaho Falls, ID USA)
EVALUATION OF CANDU SPENT NUCLEAR FUEL BUNDLE STRUCTURAL INTEGRITY DURING NORMAL TRANSPORT CONDITIONS G. D. Morandin, Atomic Energy of Canada Ltd. (Mississauga, Ontario, CANADA); D. J. Ribbans, Ontario Power Generation (Toronto, Ontario, CANADA); E. Araujo, Atomic Energy of Canada Ltd. (Mississauga, Ontario, CANADA)
SESSION 3.2F (DA- 07)
Wednesday, July 23, 10:30 AM - 12:15 PM,
PANEL SESSION: GENERATION IV NUCLEAR REACTORS — MATERIALS AND STRUCTURES CHALLENGES FOR PRESSURE VESSELS AND PIPING
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 459, DESIGN AND ANALYSIS METHODS AND FITNESS-FOR- SERVICE EVALUATIONS FOR PRESSURE VESSELS AND COMPONENTS
Developed by: M. B. Ruggles-Wrenn, Oak Ridge National Laboratory (Oak Ridge, TN USA)
Chair: M. B. Ruggles-Wrenn, Oak Ridge National Laboratory (Oak Ridge, TN USA) Vice Chair: W. R. Corwin, Oak Ridge National Laboratory (Oak Ridge, TN USA)
PANELISTS:
W. R. Corwin, Oak Ridge National Laboratory (Oak Ridge, TN USA) R. M. Versluis, U.S. Department of Energy (Washington, DC USA) R. R. Schultz, Idaho National Engineering and Environmental Laboratory (Idaho Falls, ID USA) F. Southworth, Idaho National Engineering and Environmental Laboratory (Idaho Falls, ID USA) M. Mayfield, U. S. Nuclear Regulatory Comission (Washington, DC USA)
SESSION 3.2G (DA- 04F)
Wednesday, July 23, 10:30 AM - 12:15 PM,
FATIGUE ASSESSMENT FOR DESIGN
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 469, DESIGN AND ANALYSIS OF PRESSURE VESSELS AND PIPING: IMPLEMENTATION OF ASME B31, FATIGUE, ASME SECTION VIII, AND BUCKLING ANALYSES
Developed by: D. Moinereau, EDF (Cedex FRANCE); K. Yoon, Framatome, ANP (Lynchburg, VA USA); J.-B. Choi, Sungkyunkwan University (KOREA)
Chair: K. Yoon, Framatome, ANP (Lynchburg, VA USA)
Vice Chair: F. Curtit, EDF (Moret-sur-Loing, FRANCE)
PRESENTATION OF A NUMERICAL 3D APPROACH TO TACKLE THERMAL STRIPING IN A PWR NUCLEAR PLANT T-JUNCTION C. Péniguel, M. Sakiz, and S. Benhamadouche, EDF (Chatou, FRANCE); J.M. Stephan, EDF (Moret-sur-Loing, FRANCE); C. Vindeirinho, EDF (Chatou, FRANCE)
FATIGUE CRACK INITIATION IN PRESSURE VESSEL STEELS USING A DISTANCE PARAMETER S. Chattopadhyay, Bucknell University (Lewisburg, PA USA)
PROPOSAL OF DETERMINATION PROCEDURE ABOUT FATIGUE SAFETY FACTORS FOR ARBITRARY FIT CURVES N. Kawasaki, Japan Nuclear Cycle Development Institute (Ibaraki, JAPAN) SESSION 3.2J (SE- 07)
Wednesday, July 23, 10:30 AM - 12:15 PM,
DEVELOPMENT OF ADVANCED CONSTITUTIVE MODELS AND NUMERICAL CALCULATION PROCEDURES IN SEISMIC ENGINEERING - I
Sponsored by: The Seismic Engineering Committee
Published in PVP Vol. 466, SEISMIC ENGINEERING - 2003
Developed by: C. S. Tsai, Feng Chia University (Taichung, TAIWAN); J. C. Chen, Lawrence Livermore National Laboratory (Livermore, CA USA)
Chair: C. S. Tsai, Feng Chia University (Taichung, TAIWAN),
Vice Chair: J. C. Chen, Lawrence Livermore National Laboratory (Livermore, CA USA)
CONSTRUCTION OF GENERALIZED NEURAL NETWORK SYSTEM FOR RECOGNIZING SEVERAL NON-LINEAR BEHAVIORS T. Mazda, H. Otsuka, W. Yabuki, and K. Iwamoto, Kyushu University (Fukuoka, JAPAN)
AN ADVANCED CAP MODEL FOR CONCRETE MATERIALS C. S. Tsai, C. S. Chen, Y. Z. Lin, and B. J. Chen, Feng Chia University (Taichung, TAIWAN); J. C. Chen, Lawrence Livermore National Lab. (Livermore, CA USA)
EFFECT OF SMEAR ON FINITE STRAIN RADIAL CONSOLIDATION FOR VERTICAL PREFABRICATED DRAIN IN COMPRESSIBLE SOILS K. H. Chen, T. H. Hsieh, and I. F. Lin, Feng Chia University (Taichung, TAIWAN)
SESSION 3.2L (MF- 06B)
Wednesday, July 23, 10:30 AM - 12:15 PM,
FLAW EVALUATION PROCEDURES - II
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 463, FLAW EVALUATION, SERVICE EXPERIENCE AND RELIABILITY
Developed by: C. Faidy, EDF (Villeurbanne FRANCE) Chair: R. C. Cipolla, Aptech Engineering Services, Inc. (Sunnyvale, CA USA)
Vice Chair: K. Hasegawa, Hitachi, Ltd. (Hitachi-shi JAPAN)
FLAW EVALUATION PROCEDURES AND ACCEPTANCE CRITERIA FOR NUCLEAR PIPING IN ASME CODE SECTION XI D. A. Scarth, Kinectrics, Inc. (Toronto, Ontario CANADA); G. M. Wilkowski, Engineering Mechanics Corporation of Columbus (Columbus, OH USA); R. C. Cipolla, Aptech Engineering Services, Inc. (Sunnyvale, CA USA); S. K. Daftuar, Arizona Public Service (Tonopah, AZ USA); and K. K. Kashima CRIEPI (Tokyo JAPAN)
A NEW COMBINED DETERMINISTIC AND PROBABILISTIC FLAW EVALUATION PROCEDURE P. Dillström, DNV (SWEDEN)
API 579 - A COMPREHENSIVE FITNESS-FOR-SERVICE STANDARD D. A. Osage, The Equity Engineering Group, Inc. (Shaker Heights, OH USA)
FITNESS-FOR-SERVICE ASSESSMENT FOR PRESSURE EQUIPMENT IN JAPAN T. Tahara, High Pressure Institute of Japan (Tokyo JAPAN)
SESSION 3.2M (MF- 04B)
Wednesday, July 23, 10:30 AM - 12:15 PM,
WELDING AND RESIDUAL STRESS - II
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 464, RESIDUAL STRESS, FITNESS-FOR-SERVICE, AND MANUFACTURING PROCESSES (AND) STUDENT PAPER COMPETITION
Developed by: E. Keim, Framatome ANP GmbH Technical Center, (Erlangen GERMANY); P. Dong, Battelle Memorial Institute (Columbus, OH USA); F. W. Brust, Battelle Memorial Institute (Columbus, OH USA)
Chair: F. W. Brust, Battelle Memorial Institute (Columbus, OH USA)
Vice Chair: A. H. Sherry, Serco Assurance (Cheshire, UK)
ALLOWANCE FOR RESIDUAL STRESSES AND MATERIAL INTERFACES WHEN CALCULATING J IN AND CLOSE TO WELDED JOINTS WELDS A. H. Sherry and D. W. Beardsmore, Serco Assurance, (Cheshire UK)
OPTIMIZED CONDITIONS FOR TENSILE RESIDUAL STRESS REDUCING WELD USING WATER-SHOWER COOLING N. Yanagida, K. Enomoto, and H. Anzai, Hitachi, Ltd. (Ibaraki JAPAN)
VIRTUAL FABRICATION TECHNOLOGY WELD MODELING TOOL AND ITS APPLICATIONS IN DISTORTION PREDICTIONS Y. P. Yang, F. W. Brust, and Z. Cao, Battelle Memorial Institute (Columbus, OH USA)
CREEP BEHAVIOR OF WELD METAL AND HEAT AFFECTED ZONE ON A BIMETALLIC WELDED PIPE Y. P. Yang, F.W. Brust and J. Oh, Battelle Memorial Institute (Columbus, OH USA)
SESSION 3.2O (FSI- 01J)
Wednesday, July 23, 10:30 AM - 12:15 PM,
NEW APPLICATIONS OF SHOCK PROCESSING - II
Sponsored by: Fluid Structure Interaction Committee
Published in PVP Vol. 460, 7TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGIES IN FLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS - 2003
Developed by: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA); M. Fischer, Technical Consultant (München, GERMANY); A. E. Holdo, University of Hertfordshire (Herts, UK); S. Itoh, Kummamoto University (Kumamoto, JAPAN); M. Souli, Université de Lille (Lille, FRANCE)
Chair: A. Pierorazio, Baker Engineering and Risk Consultants (San Antonio, TX, USA)
Vice Chair: Q. Zhang, INTEC Engineering Partnership Ltd.. (Houston, TX, USA)
CELL RUPTURES OF MICROORGANISMS BY SHOCK WAVE AND ULTRASONIC WAVE K. Fujiwara, T. Hiroe, and M. Asakawa, Kumamoto University (Kumamoto, JAPAN)
BASIC STUDY FOR CRUSHING OF FROZEN SOIL BY UNDERWATER SHOCK WAVE T. Watanabe, National Fisheries University (Yamaguchi, JAPAN); S. Itoh, and T. Hamada, Kumamoto University (Kumamoto, JAPAN); Y. Kuroyama, and A. Nakachi, NOF Corporation (Hokkaido,JAPAN); O. Kiyama, Kumamoto University (Kumamoto, JAPAN)
NUMERICAL SIMULATION FOR THE MULTIPLE CYLINDRICAL HIGH PRESSURE DEVICE S. Itoh, H. Morimoto, and O. Kiyama, Kumamoto University (Kumamoto, JAPAN); E. Kakimoto, Asahikasei Corporation (Chikushino, JAPAN) Block 3.3: Wednesday, July 23 (2:30 PM - 4:15 PM)
SESSION 3.3A
Wednesday, July 23, 2:45 PM - 4:00 PM,
PVP04 TRAINING - CHAIRS, TPRS, DEVELOPERS, OFFICERS AUTHORS, AND MEMBERS
THURSDAY, July 24
Block 4.1: Thursday, July 24 (8:30 AM - 10:15 AM)
SESSION 4.1A (TUT- 04A)
Thursday, July 24, 8:30 AM - 10:15 AM,
TUTORIAL: RISK-BASED MAINTENANCE AND INTEGRITY MANAGEMENT - I
Sponsored by: The PVP Division Conference Committee
Presented by: J. A. Farquharson and R. L. Montgomery, ABS Consulting (Knoxville, TN USA)
SESSION 4.1B (CS- 06A)
Thursday, July 24, 8:30 AM - 10:15 AM,
PANEL SESSION: CURRENT AND ONGOING PERSPECTIVES OF ASME BOILER AND PRESSURE VESSEL CODES
Sponsored by: Codes and Standards Committee Published in PVP Vol. 453, PRESSURE VESSELS AND PIPING CODES AND STANDARDS - 2003
Developed by: K. R. Rao (Retired), Entergy Operations (Brandon, MS USA)
Chair: C. Becht IV, Becht Engineering Co. (Liberty Corner, NJ USA)
Vice Chair: W. J. Koves, UOP LLC (Des Plaines, IL USA)
OBSERVATIONS ON THE EVOLUTION OF DESIGN RULES CONSIDERING THE COMPUTER C. Becht IV, Becht Engineering (Liberty Corner, NJ USA)
PVRC ACTIVITIES SUPPORTING THE DEVELOPMENT OF ASME CODES AND STANDARDS W. J. Koves, UOP LLC (Des Plaines, IL USA)
SECTION III AND SECTION XI: INTEGRATION IN THE DESIGN SPECIFICATION AND DESIGN REPORT J. T. Land (Pensacloa, FL USA)
ASME SECTION III SUBSECTION NF LINEAR CURRENT AND FUTURE CONCEPTS R. J. Masterson (Fall River, MA USA)
REACTOR WATER ENVIRONMENTAL FATIGUE W. J. O’Donnell, O’Donnell Consulting Engineers, Inc. (Bethel Park, PA USA)
SESSION 4.1C (CT- 01C)
Thursday, July 24, 8:30 AM - 10:15 AM,
FINITE ELEMENT METHODOLOGY FOR MANUFACTURING SIMULATIONS AND FIELD APPLICATIONS
Sponsored by: Computer Technology Committee
Published in PVP Vol. 458, COMPUTER TECHNOLOGY AND APPLICATIONS
Developed by: J. Martin, Lockheed Martin, Inc (Albany, NY USA); Y. Urthaler, Texas A&M University (College Station, TX USA)
Chair: J. Martin, Lockheed Martin, Inc (Albany, NY USA)
Vice Chair: Y. Urthaler, Texas A&M University (College Station, TX USA) STRESS ANALYSIS OF A PIN AND CLEVIS ASSEMBLY E. Shields, B. Pechatsko, J. Stambolia, J. Davenport, and A. Orning; Youngstown State University (Youngstown, OH USA)
MODELLING STUDIES OF THE FATIGUE BEHAVIOR OF A NOZZLE-TO-VESSEL INTERSECTION A. M. P. DeJesus, A. S. Ribeiro, and A. A. Fernandes, Universidads de Tras-os-Montes, (Quinta de Prados, PORTUGAL)
A FINITE ELEMENT STUDY OF FRICTIONAL EFFECT IN FOUR-POINT BENDING CREEP TEST Y. S. Kim, and D. R. Metzger, McMaster University (Hamilton, Ontario CANADA)
METHODS, MODELS, AND ASSUMPTIONS USED IN FINITE ELEMENT SIMULATION OF A PILGERING METAL FORMING PROCESS J. Martin, Lockheed Martin, Inc. (Albany, NY USA)
SESSION 4.1D (MF- 07A)
Thursday, July 24, 8:30 AM - 10:15 AM,
RELIABILITY OF DEGRADING PROCESSING AND STORAGE STRUCTURES
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 463, FLAW EVALUATION, SERVICE EXPERIENCE AND RELIABILITY
Developed by: R. L. Sindelar and P. S. Lam, Westinghouse Savannah River Company (Aiken, SC USA)
Chair: R. L. Sindelar, Westinghouse Savannah River Company (Aiken, SC USA)
Vice Chair: P. S. Lam, Westinghouse Savannah River Company (Aiken, SC USA)
PROBABILISTIC PREDICTIONS FOR PIPING FATIGUE INCLUDING THE EFFECTS OF ULTRASONIC EXAMINATIONS F. A. Simonen, Pacific Northwest National Laboratory (Richland, WA USA)
EFFECTS OF WELD REPAIRS ON CALCULATED FAILURE PROBABILITIES FOR REACTOR PRESSURE VESSELS AND PIPING F. A. Simonen, G. J. Schuster, and S. R. Doctor, Pacific Northwest National Laboratory (Richland, WA USA) CREEP ACTIVATION ENERGY OF ELECTROSLEEVETM NANO-CRYSTALLINE NICKEL -PHOSPHOROUS TUBE REPAIR AND Ni-200 M. G. Pop, J. C. Griffith, J. E. Galford and J. A. Burgess, Jr., Framatome Advanced Nuclear Power (Lynchburg, VA USA)
REMOTE INSPECTION OF A HIGH LEVEL RADIOACTIVE WASTE STORAGE TANK FOR CRACKING, THINNING, AND PITTING J. B. Elder, B. J. Wiersma, and R. L. Sindelar, Westinghouse Savannah River Company (Aiken, SC USA)
STRUCTURAL IMPACT ASSESSMENT OF FLAWS DETECTED DURING ULTRASONIC EXAMINATION OF A RADIOACTIVE WASTE TANK B. J. Wiersma and J. B. Elder, Westinghouse Savannah River Company (Aiken, SC USA)
SESSION 4.1E (OAC- 03E)
Thursday, July 24, 8:30 AM - 10:15 AM,
TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - V: THERMAL ISSUES I
Sponsored by: Operations, Applications & Components Committee
Published in PVP Vol. 467, TRANSPORTATION, STORAGE AND DISPOSAL OF RADIOACTIVE MATERIALS
Developed by: R. S. Hafner, Lawrence Livermore National Laboratory (Livermore, CA USA); A. C. Smith, Westinghouse Savannah River Company (Aiken, SC USA); M. E. Wangler, International Atomic Energy Agency (Vienna, AUSTRIA)
Chair: G. D. Morandin, Atomic Energy of Canada Ltd. (Mississauga, Ontario, CANADA)
Vice Chair: S. D. Snow, Idaho National Engineering & Environmental Laboratory (Idaho Falls, ID USA)
THERMAL ANALYSIS AND TEST RESULTS FOR THE OVERPACK OF A TYPICAL RADIOACTIVE MATERIALS PACKAGE N. K. Gupta and A. C. Smith, Westinghouse Savannah River Company (Aiken, SC USA)
POST FIRE TRANSIENT TEMPERATURE DISTRIBUTION IN DRUM TYPE PACKAGES IN THE ABSENCE OF HEAT GENERATION A. C. Smith, Westinghouse Savannah River Company (Aiken, SC USA) VALIDATION OF THE ISIS-3D COMPUTER CODE FOR SIMULATING LARGE POOL FIRES UNDER A VARIETY OF WIND CONDITIONS M. Greiner, University of Nevada (Reno, NV USA); A. J. Suo-Anttila, Innovative Technology Solutions (Albuquerque, NM USA)
SESSION 4.1F (DA- 04G)
Thursday, July 24, 8:30 AM - 10:15 AM,
FATIGUE ANALYSIS METHODS
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 461, FATIGUE, FRACTURE AND DAMAGE ANALYSIS - 2003
Developed by: D. Moinereau, EDF (Cedex FRANCE); K. Yoon, Framatome, ANP (Lynchburg, VA USA); J.-B. Choi, Sungkyunkwan University (KOREA)
Chair: S. Chattopadhyay, Bucknell University (Lewisburg, PA USA)
Vice Chair: K. Yoon, Framatome, ANP (Lynchburg, VA USA)
AN ANALYTICAL MODEL FOR THERMAL FATIGUE CRACK INITIATION AND PROPAGATION IN MIXING ZONES OF PIPING SYSTEMS S. Musi, and F. Beaud, EDF (Villeurbanne, FRANCE)
FREQUENCY TRANSFER FUNCTION FROM FLUID TEMPERATURE FLUCTUATIONS TO STRESS INTENSITY FACTORS N. Kasahara and M. Ando, Japan Nuclear Cycle Development Institute (Oarai, JAPAN); I. Furuhashi, CRC Solutions Co., Ltd. (Oarai, JAPAN); C. Fuquan, Shanghai Nuclear Engineering (Shanghai CHINA); H. Takasho, Joyo Industries, Ltd. (Oarai, JAPAN),
PROBABILISTIC FRAMEWORK FOR FATIGUE LIFE ASSESSMENT B. Sudret, P. Hornet, J.M. Stephan, EDF (Moret-sur-Loing FRANCE); Z. Guédé and M. Lemaire, IFMA (Aubiere, FRANCE)
THERMAL FATIGUE IN MIXING AERAS. ON-GOING PROGRAM TO SUPPORT CODE RULE IMPROVEMENTS C. Faidy, EDF (Villeurbanne, FRANCE)
SESSION 4.1J (SE-12)
Thursday, July 24, 8:30 AM - 10:15 AM, PANEL SESSION: PERFORMANE BASED SEISMIC DESIGN OF EQUIPMENT AND COMPONENTS
Sponsored by: The Seismic Engineering Committee
Developed by: Q. Hossain and J. C. Chen, Lawrence Livermore National Laboratory Livermore, CA, USA)
Chair: N. Shimizu, Iwaki Meisei University (Iwaki, Fukushima, JAPAN)
Vice Chair: Q. Hossain, Lawrence Livermore National Laboratory (Livermore, CA USA)
PANELISTS:
T. M. Adams Stevenson and Associates (Cleveland, OH USA) P. D. Baughman ABS Consulting (Strathman, NH USA) Q. A. Hossain Lawrence Livermore National Laboratory (Livermore, CA USA) J. D. Stevenson Stevenson and Associates (Cleveland, OH USA)
SESSION 4.1K (HPT- 03)
Thursday, July 24, 8:30 AM - 10:15 AM,
PANEL SESSION: THE RULES SHAPING THE HIGH PRESSURE INDUSTRY: WHERE WE ARE AND WHERE WE ARE GOING
Sponsored by: High Pressure Technology Committee
Published in PVP Vol. 455, HIGH PRESSURE TECHNOLOGY: 2003 SHAPING HIGH PRESSURE TECHNOLOGY FOR THE FUTURE
Developed by: D. T. Peters, Autoclave Engineers (Erie, PA USA)
Chair: E. Roll, Ingersoll-Rand Co. (Bryan, OH USA)
Vice Chair: D. T. Peters, Autoclave Engineers (Erie, PA USA)
PANELISTS:
ASME SECTION VIII DIVISION 3 DESIGN OF HIGH PRESSURE VESSELS J. R. Sims Jr., Engr. Assoc., Becht Engineering Co., Inc. (Liberty Corner, NJ USA) ASME HIGH PRESSURE SYSTEMS D. Fryer, High Pressure Engineering and Safety (Fairview, PA USA)
ASME B31.3 HIGH PRESSURE PIPING F. W. Tatar, FM Global Research (Norwood, MA USA); R. J. Medvick, Swagelok (Solon, OH USA)
ASME HIGH PRESSURE RELIEF DEVICES A. West, Tyco Valves & Controls, Anderson Greenwood Crosby (Stafford, TX USA)
SESSION 4.1L (MF- 06C)
Thursday, July 24, 8:30 AM - 10:15 AM,
FLAW EVALUATION PROCEDURES - III
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 463, FLAW EVALUATION, SERVICE EXPERIENCE AND RELIABILITY
Developed by: C. Faidy, EDF (Villeurbanne FRANCE)
Chair: D. A. Osage, The Equity Engineering Group, Inc. (Shaker Heights, OH USA)
Vice Chair: T. Tahara, High Pressure Institute of Japan (Tokyo JAPAN)
A FRENCH GUIDELINE FOR DEFECT ASSESSMENT AT ELEVATED TEMPERATURE AND LEAK BEFORE BREAK ANALYSIS Y. Kayser, S. Marie, S. Chapuliot, M. H Lacire, and B.Drubay, CEA (Gif-sur-Yvette FRANCE)
ASSESSMENT OF CREEP AND CREEP-FATIGUE CRACK GROWTH FOLLOWING THE R5 PROCEDURES R. A. Ainsworth, P. J. Budden, D. W. Dean, M. J. H. Fox, and M. P. O’Donnell, British Energy Generation Ltd. (Gloucester UK); J. M. H. Dean, BNFL Magnox Generation (Berkeley UK); I. W. Goodall, Imperial College (London UK); D. G. Hooton, Serco Assurance (Warrington UK)
DEFECT ASSESSMENT PROCEDURE FOR THE LOW TO HIGH TEMPERATURE RANGE B. Dogan, GKSS (GERMANY); R. A. Ainsworth, British Energy Generation Ltd. (Gloucester UK) SESSION 4.1N (FSI- 05)
Thursday, July 24, 8:30 AM - 10:15 AM,
FLUID STRUCTURE INTERACTION AND SLOSHING
Sponsored by: Fluid Structure Interaction Committee
Published in PVP Vol. 454, PROBLEMS INVOLVING THERMAL-HYDRAULICS, LIQUID SLOSHING, AND EXTREME LOADS IN STRUCTURES
Developed by: D. Brochard, Institute for Protection and Nuclear Safety (Gif-sur-Yvette Cedex, FRANCE); C. Minowa, National Research Institute for Earth Science and Disaster Prevention (Tsukuba, JAPAN); D. C Ma, Argonne National Laboratory (Argonne, IL USA)
Chair: D. Brochard, Institute for Protection and Nuclear Safety (Gif-sur-Yvette Cedex, FRANCE)
Vice Chair: C. Minowa,National Research Institute for Earth Science and Disaster Prevention (Tsukuba, JAPAN)
EFFECTS OF DAMPER FORCE RANGES AND GROUND MOTION PULSE PERIODS ON THE PERFORMANCE OF SEMI-ACTIVE ISOLATION SYSTEMS H. Gavin and J. Thurston, Duke University (Durham, NC USA); C. Minowa, National Research Institute for Earth Science and Disaster Prevention (Tsukuba, JAPAN); H. Fujitani, Building Research Institute (Tsukuba, JAPAN)
CHOICE AND LIMITS OF A LINEAR FLUID MODEL FOR THE NUMERICAL STUDY IN DYNAMIC FLUID STRUCTURE INTERACTION PROBLEM J. F. Sigrist, C. Laine, and D. Lemoine, Service Scientific of Technology (La Montagne, FRANCE); B. Peseux, Ecole Centrale of Nantes (Nantes, Cedex FRANCE)
DISCUSSION ON TWO TIMES INTEGRAL DISPLACEMENTS OF STRONG GROUND MOTION RECORDS AND SHAKING TABLE DATA M. Toyoshima, Tokyu Construction Corporation (Tokyu, JAPAN); C. Minowa, National Research Institute for Earth Science and Disaster Prevention (Tsukuba, JAPAN)
ENTROPY AND LYAPUNOV EXPONENTS RELATIONSHIPS IN STOCHASTIC DYNAMIC SYSTEMS F. Jedrzejewski, CEA-CE Saclay (Gif-sur-Yvette, Cedex FRANCE) SESSION 4.1O (FSI- 01B)
Thursday, July 24, 8:30 AM - 10:15 AM,
ADVANCES IN FLUID-STRUCTURE INTERACTION IN PLANT DESIGN - II
Sponsored by: Fluid Structure Interaction Committee
Published in PVP Vol. 460, 7TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGIES IN FLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS - 2003
Developed by: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA); M. Fischer, Technical Consultant (München, GERMANY); A. E. Holdo, University of Hertfordshire (Herts, UK); S. Itoh, Kummamoto University (Kumamoto, JAPAN); M. Souli, Université de Lille (Lille, FRANCE)
Chair: M. Fischer, Technical Consultant (München, GERMANY)
Vice Chair: M. Souli, Université de Lille (Lille, FRANCE)
NUMERICAL SIMULATION OF STIRRER OSCILLATIONS IN CONSIDERATION OF FLUID-STRUCTURE -INTERACTION AND FLEXIBLE RESTRAINT SYSTEMS T. Berger and K. Strohmeier, Technical University of Munich (Garching, GERMANY)
CIRCULAR CYLINDER EXPOSED TO CROSS FLOW FLUID FORCES - PARAMETERS OF INFLUENCE - LIMITS OF NUMERICAL MODELS C. Reichel and K. Strohmeier, Technical University of Munich (Garching, GERMANY)
CALCULATION OF FLOW INDUCED VIBRATION AMPLITUDES OF RADIAL SEWAGE WATER PUMPS F.-K. Benra, H. J. Dohmen, and O. Schneider, Gerhard-Mercator-University (Duisburg, GERMANY)
EFFECT OF FLOW-PIPE INTERACTION ON DRILL PIPE BUCKLING AND DYNAMICS Q. Zhang, INTEC Engineering Partnership Ltd. (Houston, Texas USA); S. Miska, University of Tulsa (Tulsa, Oklahoma USA)
Block 4.2: Thursday, July 24 (10:30 AM - 12:15 PM) SESSION 4.2A (TUT- 04B)
Thursday, July 24, 10:30 AM - 12:15 PM,
TUTORIAL: RISK-BASED MAINTENANCE AND INTEGRITY MANAGEMENT - II
Sponsored by: The PVP Division Conference Committee
Presented by: J. A. Farquharson and R. L. Montgomery, ABS Consulting (Knoxville, TN USA)
SESSION 4.2B (CS- 06B)
Thursday, July 24, 10:30 AM - 12:15 PM,
PANEL SESSION: CURRENT AND ONGOING PERSPECTIVES OF ASME CODE SECTION XI
Sponsored by: Codes and Standards Committee
Published in PVP Vol. 453, PRESSURE VESSELS AND PIPING CODES AND STANDARDS - 2003
Developed by: K. R. Rao (Brandon, MS USA)
Chair: R. E. Gimple, Wolf Creek Nuclear Operation Corp. (Burlington, KS USA)
Vice Chair: J. Spanner, Jr., EPRI (Charlotte, NC USA)
AN OVERVIEW OF CURRENT ASME SECTION XI ACTIVITIES R. E. Gimple, Wolf Creek Nuclear Operation Corporation (Burlington, KS USA)
ADVANCES IN RISK-INFORMED APPLICATION WITHIN ASME SECTION XI G. Park, Monticello Nuclear Generating Facility (Monticello, MN USA)
STATUS AND FUTURE OF NDE IN SECTION XI J. Spanner Jr., EPRI (Charlotte, NC USA)
SECTION XI: RESPONDING TO INSERVICE INSPECTION FINDINGS W. Bamford, Westinghouse Electric Co. (Pittsburgh, PA USA) SIGNIFICANT CHANGES IN THE ASME SECTION XI REQUIREMENTS FOR REPAIR/REPLACEMENT ACTIVITIES R. W. Swayne, Reedy Engineering (Campbell, CA USA)
CHANGES NEEDED TO ADDRESS CURRENT INSTITUTIONAL PROBLEMS O. F. Hedden, (Fort Worth, TX USA)
SESSION 4.2C (CT- 02A, MF-13)
Thursday, July 24, 10:30 AM - 12:15 PM,
NEW AND EMERGING COMPUTATIONAL METHODS - I
Sponsored by: Computer Technology and Manufacturing and Fabrication Committees
Published in PVP Vol. 458, COMPUTER TECHNOLOGY AND APPLICATIONS
Developed by: J. Tang, University of Iowa (Iowa City, IA USA); Y. H. Park, New Mexico State University (Las Cruces, NM USA); B. N. Rao, University of Iowa (Iowa City, IA USA)
Chair: J. Tang, University of Iowa (Iowa City, IA USA)
Vice Chair: B. N. Rao, University of Iowa (Iowa City, IA USA)
ELASTO-PLASTIC BEHAVIOR OF POLYCRYSTALLINE STEEL AT MESOSCOPIC AND MACROSCOPIC LEVELS M. Kovac, I. Simonovski, and L.Cizelj, Josef Stefan Institute (Ljubljana, SLOVENIA)
STUDY OF EFFECTIVE ELASTIC MODULI OF CRACKED SOLID Y. H. Park and W. Morgan, New Mexico State University (Las Cruces, NM USA)
CALCULATION OF THE TEMPERATURE FIELD OF THE SOLIDIFYING CERAMIC MATERIAL EUCOR F. Kavicka, Brno University of Technology (Technicka, CZECH REPUBLIC)
AUTOMATED MODELING AND CRACK GROWTH SIMULATION PRESSURIZED FUSELAGE PANELS WITH MULTI-SITE DAMAGE K. V. N. Gopal and B. Dattaguru, Indian Institute of Science (Bangalore, INDIA)
TRANSIENT ANALYSIS OF HEAT CONDUCTION IN ORTHOTROPIC MEDIA BY THE DQEM AND EDQ BASED TIME INTEGRATION SCHEMES C.-N. Chen, National Cheng Kung University (Tainan, TAIWAN) SESSION 4.2E (OAC- 03F)
Thursday, July 24, 10:30 AM - 12:15 PM,
TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - VI: THERMAL ISSUES II
Sponsored by: Operations, Applications & Components Committee
Published in PVP Vol. 467, TRANSPORTATION, STORAGE AND DISPOSAL OF RADIOACTIVE MATERIALS
Developed by: R. S. Hafner, Lawrence Livermore National Laboratory (Livermore, CA USA); M. E. Wangler, International Atomic Energy Agency (Vienna, AUSTRIA)
Chair: S. D. Snow, Idaho National Engineering & Environmental Laboratory (Idaho Falls, ID USA)
Vice Chair: R. J. Smith, Packaging Technology, Inc. (Tacoma, WA USA)
TRANSIENT THERMAL ANALYSIS OF PACKAGING USING THE INTEGRAL METHOD (Presentation Only) W. H. Lake, ASE, Inc. (Silver Spring, MD USA)
ANALYSIS OF THE IMPACT OF A TUNNEL FIRE ENVIRONMENT ON A SPENT NUCLEAR FUEL TRANSPORTATION CASK C. S. Bajwa, U.S. Nuclear Regulatory Commission (Rockville, MD USA)
GETTING READY TO SHIP SPENT FUEL AND HIGH LEVEL RADIOACTIVE WASTE TO A REPOSITORY IN 2010 (Presentation Only) W. H. Lake, ASE, Inc. (Silver Spring, MD USA)
SESSION 4.2F (DA- 05)
Thursday, July 24, 10:30 AM - 12:15 PM,
DESIGN AND ANALYSIS FOR ELEVATED TEMPERATURES
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 459, DESIGN AND ANALYSIS METHODS AND FITNESS FOR SERVICE EVALUATIONS FOR PRESSURE VESSELS AND COMPONENTTS Developed by: C. Becht IV, Becht Engineering Co., Inc. (Liberty Corner, NJ USA); A. Ponter, University of Leicester (Leicester UK)
Chair: A. Ponter, University of Leicester (Leicester UK)
Vice Chair: C. Becht IV, Becht Engineering Co., Inc. (Liberty Corner, NJ USA)
EVALUATION OF SHORT-TERM CREEP RUPTURE STRENGTH OF HIGH TEMPERATURE P122 BOILER MATERIAL J. Pumwa, Papua New Guinea University of Technology (Papua NEW GUINEA)
CALCULATION OF STRESS RELAXATION PROPERTIES FOR 1CRMOV BOLT MATERIAL F. V. Ellis, Tordonato Energy Consultants, Inc. (Chattanooga, TN USA); S. Tordonato, Tordonato Energy Consultants, Inc. (Clifton, VA USA)
A MODIFIED POWER LAW FOR CREEP ANALYSIS M. Katcher, Hayes International (Kokomo, IN USA)
METHODS FOR THE EVALUATION OF CREEP RELAXATION AND THE AMPLITUDE OF REVERSE PLASTIC STRAIN FOR BODIES SUBJECTED TO CYCLIC LOADING H. Chen and A. Ponter, University of Leicester (Leicester UK)
SESSION 4.2J (SE- 08)
Thursday, July 24, 10:30 AM - 12:15 PM,
DEVELOPMENT OF ADVANCED CONSTITUTIVE MODELS AND NUMERICAL CALCULATION PROCEDURES IN SEISMIC ENGINEERING - II
Sponsored by: The Seismic Engineering Committee
Published in PVP Vol. 466, SEISMIC ENGINEERING - 2003
Developed by: C. S. Tsai, Feng Chia University (Taichung, TAIWAN); J. C. Chen, Lawrence Livermore National Laboratory (Livermore, CA USA)
Chair: G. Roussel, AVN (Brussels, BELGIUM)
Vice Chair: C. S. Tsai, Feng Chia University (Taichung, TAIWAN)
FINITE ELEMENT FORMULATIONS AND THEORETICAL STUDY FOR VCFPS C. S. Tsai, T. C. Chiang, and B. J. Chen, Feng Chia University (Taichung, TAIWAN) AN ADVANCED CAP MODEL FOR SOILS C. S. Tsai, C. S. Chen, Z. Y. Zhang , and B. J. Chen, Feng Chia University (Taichung, TAIWAN); J. C. Chen, Lawrence Livermore National Lab. (Livermore, CA USA)
ERROR PROPAGATION FOR EXPLICIT PSEUDODYNAMIC TESTING S. Y. Chang, National Taipei University of Technology (Taipei, TAIWAN)
SESSION 4.2K (HPT- 04)
Thursday, July 24, 10:30 AM - 12:15 PM,
ADVANCEMENT IN HIGH PRESSURE FAILURE PROTECTION DEVICES, ANALYSIS AND FORENSICS
Sponsored by: High Pressure Technology Committee
Published in PVP Vol. 455, HIGH PRESSURE TECHNOLOGY: 2003 SHAPING HIGH PRESSURE TECHNOLOGY FOR THE FUTURE
Developed by: D. T. Peters. Autoclave Engineers (Erie, PA USA)
Chair: M. Quint, Autoclave Engineers (Erie, PA USA)
Vice Chair: R. Mielnik, Autoclave Engineers (Erie, PA USA)
POWER ACTUATED PRESSURE RELIEF VALVE FOR HIGH PRESSURE VESSELS A. Traff and P. Jansson, Avure Technologies (Västerås, SWEDEN)
LESSONS LEARNED FROM A VESSEL EXPLOSION CAUSED BY HUMAN ERROR R. D. Dixon, E. H. Perez, E. I. DuPont and Company (Willmington, DE USA)
DESIGN CRITERIA FOR PREVENTION OF DUCTILE FAILURE IN EXPLOSIVELY- LOADED PRESSURE VESSELS E. A. Rodriquez, Los Alamos National Laboratory (Los Alamos, NM USA); T. A. Duffey (Tijeras, NM USA); R. E. Nickell, Applied Science & Technology (Poway, CA USA)
SESSION 4.2L (MF- 05A)
Thursday, July 24, 10:30 AM - 12:15 PM,
RESIDUAL STRESS AND FITNESS FOR SERVICE
Sponsored by: The Materials and Fabrication Committee Published in PVP Vol. 464, RESIDUAL STRESS, FITNESS-FOR-SERVICE, AND MANUFACTURING PROCESSES (AND) STUDENT PAPER COMPETITION
Developed by: P. Dong, Battelle Memorial Institute (Columbus, OH USA); A. K. Motarjemi, TWI Limited (Cambridge, UK)
Chair: P. Dong, Battelle Memorial Institute (Columbus, OH USA)
Vice Chair: A. K. Motarjemi, TWI Limited (Cambridge, UK)
CRACK GROWTH BEHAVIOR IN RESIDUAL STRESS FIELD IN VESSEL TYPE STRUCTURES P. Dong, Battelle Memorial Institute (Columbus, OH USA); G. Rawls, Westinghouse Savannah River Company (Aiken, SC USA)
EFFECTS OF PLASTICITY ON FATIGUE LIFE ON WELDED NUCLEAR COMPONENT WITH LOCAL BRITTLE ZONE J-S. Kim, S-H. Lee, and T-E. Jin, Korea Power Engineering Company (Yougin, Kyunggi-do KOREA)
FRACTURE ASSESSMENT OF THE HIGH STRENGTH SUPER-MARTENSITIC STAINLESS STEEL WELDS BY SINTAP PROCEDURE A. K. Motarjemi, M. Kocak and R. Segar, Institute of Materials Research, GKSS Research Center (Geesthacht GERMANY)
EUROPEAN FITNESS FOR SERVICE THEMATIC NETWORK-FITNET (Presentation Only) A. K. Motarjemi, Institute of Materials Research, GKSS Research Center (Geesthacht GERMANY)
OVERVIEW OF FFS PROCEDURES IN API 579 AND ASME DIV 2 REWRITE (Presentation Only) D. Osage, The Equity Engineering Group, Inc. (Shaker Heights, OH USA); M. Prager, Pressure Vessel Research Council (New York, NY USA)
SESSION 4.2N (FSI- 06A)
Thursday, July 24, 10:30 AM - 12:15 PM,
STRUCTURES UNDER EXTREME LOADING CONDITIONS- PENETRATION AND BLAST LOADING
Sponsored by: Fluid Structure Interaction Committee Published in PVP Vol. 454, PROBLEMS INVOLVING THERMAL-HYDRAULICS, LIQUID SLOSHING, AND EXTREME LOADS ON STRUCTURES
Developed by: H. S. Levine, Weidlinger Associates Inc. (Los Altos, CA USA); S.E. Jones, University of Alabama (Tuscaloosa, AL USA); M. L. Hughes, Air Force Research Laboratory - AFRL/MNMW (Eglin AFB, FL USA); D. S. Preece, Sandia National Laboratories (Albuquerque, NM USA)
Chair: S.E. Jones, University of Alabama, Tuscaloosa, AL USA)
Vice Chair: M. L. Hughes, Air Force Research Laboratory - AFRL/MNMW, (Eglin AFB, FL USA)
HIGH-SPEED PENETRATION OF CONCRETE USING A NEW ANALYTICAL MODEL OF VELOCITY-DEPENDENT FRICTION R. N. Davis and S.E. Jones, University of Alabama (Tuscaloosa, AL USA); M. L. Hughes, Air Force research Laboratory (Eglin AFB, FL USA)
MODELING OF SLEEVED TAYLOR IMPACT SPECIMENS - MATERIAL PROPERTY EXTRACTION AND SUGGESTIONS FOR NEW GEOMETRIES W. K. Rule, SUNY Oswego (Oswego, NY USA)
RESPONSE OF THE EXPLOSIVE DESTRUCTION SYSTEM CONTAINMENT VESSEL TO INTERNAL DETONATIONS B. Haroldsen, J. Stofleth, and J. Didlake, Sandia National Laboratories (Albuquerque, NM USA)
BLASTWALL EFFECTS ON DOWN RANGE EXPLOSIVELY-INDUCED OVERPRESSURE D. S. Preece and W. Venner Saul, Sandia National Laboratories (Albuquerque, NM USA)
SESSION 4.2O (FSI- 01K)
Thursday, July 24, 10:30 AM - 12:15 PM,
ADVANCES IN EXPLOSIVE-STRUCTURE INTERACTIONS
Sponsored by: Fluid Structure Interaction Committee
Published in PVP Vol. 460, 7TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGIES IN FLUIDS, STRUCTURES, AND FLUID/STRUCTURE INTERACTIONS -2003
Developed by: W. L. Cheng, Weidlinger Associates, Inc. (Los Altos, CA USA); M. Fischer, Technical Consultant (München, GERMANY); A. E. Holdo, University of Hertfordshire (Herts, UK); S. Itoh, Kummamoto University (Kumamoto, JAPAN); M. Souli, Université de Lille (Lille, FRANCE)
Chair: M. Souli, Université de Lille (Lille, FRANCE)
Vice Chair: A. P. Gordon, Georgia Institute of Technology (Atlanta, GA, USA)
THE DESIGN OF SUPERCRITICAL LIQUID PIPE FOR ORGANIC MATERIAL TREATMENT H. Iyama, Yatsushiro National College of Technology (Kumamoto, JAPAN); K. Raghukandan, Annamalai University (Tamil Nadu, INDIA); S. Itoh, Kumamoto University (Kumamoto, JAPAN)
THE EFFECTS OF PRESSURE VESSEL FOR EXPLOSIVE FORMING H. Iyama, Yatsushiro National College of Technology (Kumamoto, JAPAN); K. Raghukandan, Annamalai University (Tamil Nadu, INDIA); S. Nagano, Kumamoto University (Kumamoto, JAPAN); S. Itoh, Kumamoto University (Kumamoto, JAPAN)
SHOCK CONSOLIDATION SYSTEM OF METALLIC POWDER USING CONCENTRIC DOUBLE CYLINDRICAL HIGH EXPLOSIVE T. Hamada, Kumamoto University (Kumamoto, JAPAN); Y. Nakamura, K.Murata and Y. Kato, NOF Corporation (Aichi, JAPAN); S. Itoh, Kumamoto University (Kumamoto, JAPAN)
STUDENT SESSION PAPER: THE PERFORMANCE OF PRESSURE VESSEL USING CONCENTRIC DOUBLE CYLINDRICAL HIGH EXPLOSIVE T. Hamada, Kumamoto University (Kumamoto, JAPAN); Y. Nakamura, K. Murata and Y. Kato, NOF Corporation (Aichi, JAPAN); S. Itoh, Kumamoto University (Kumamoto, JAPAN)
Block 4.3: Thursday, July 24 (2:00 PM - 3:45 PM)
SESSION 4.3B (CS- 05A)
Thursday, July 24, 2:00 PM - 3:45 PM, :
PANEL SESSION: AN OVERVIEW OF THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE (97/23/EC)
Sponsored by: Codes and Standards Committee
Published in PVP Vol. 453, PRESSURE VESSELS AND PIPING CODES AND STANDARDS - 2003 Developed by: B. T. Lubin, College of Engineering, University of Hartford (West Hartford, CT USA); A. Garbolevsky, HSB Global Standards (Framingham, MA USA)
Chair: A. Garbolevsky, HSB Global Standards (Framingham, MA USA)
Vice Chair: G. Chakrabarti, Westinghouse Electric Company (Madison, PA USA)
THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE 97/23/EC (PED): AN OVERVIEW A. Garbolevsky, HSB Global Standards (Framingham, MA USA)
THE RELATIONSHIP BETWEEN ISO 9000 AND PED QUALITY MODULES M. D. Norman, Det Norske Veritas Certification Inc. (Houston, TX USA)
SESSION 4.3C (CT- 02B, MF-14)
Thursday, July 24, 2:00 PM - 3:45 PM,
NEW AND EMERGING COMPUTATIONAL METHODS - II
Sponsored by: Computer Technology, and Manufacturing and Fabrication Committees
Published in PVP Vol. 458, COMPUTER APPLICATIONS AND TECHNOLOGY
Developed by: J. Tang, University of Iowa (Iowa City, IA USA); Y. H. Park, New Mexico State University (Las Cruces, NM USA); B. N. Rao, University of Iowa (Iowa City, IA USA)
Chair: B. N. Rao, University of Iowa (Iowa City, IA USA)
Vice Chair: Y. H. Park, New Mexico State University (Las Cruces, NM USA)
CONTINUUM SENSITIVITY ANALYSIS OF FRACTURE IN FUNCTIONALLY GRADED MATERIALS B. N. Rao and S. Rahman, University of Iowa (Iowa City, IA USA)
A METHODOLOGY FOR FATIGUE RELIABILITY ANALYSIS OF MECHANICAL COMPONENTS BASED ON STRESS LIFE PREDICTION APPROACH Y. H. Park New Mexico State University (Las Cruces, NM USA); J. Tang, University of Iowa (Iowa City, IA USA)
COUPLED MESHFREE & FE METHOD FOR MANUFACTURING H. P. Wang and M. E. Botkin, GM R&D Center (Warren, MI USA) BEHAVIOUR OF EMBEDDED STEEL PLATES IN REINFORCED CONCRETE: NEW DESIGN BASIS S. K. Chakrabarti, Indian Institute of Technology (Kanpur, INDIA)
GENERALIZED DIFFERENTIAL QUADRATURE METHOD FOR BURGERS EQUATION M. Mestrovic, University of Zagreb (Zagreb, CROATIA)
SESSION 4.3E (OAC- 03G)
Thursday, July 24, 2:00 PM - 3:45 PM,
TRANSPORTATION, STORAGE, AND DISPOSAL OF RADIOACTIVE MATERIALS - VII: OPERATIONAL ISSUES
Sponsored by: Operations, Applications & Components Committee
Published in PVP Vol. 467, TRANSPORTATION, STORAGE AND DISPOSAL OF RADIOACTIVE MATERIALS
Developed by: R. S. Hafner, Lawrence Livermore National Laboratory (Livermore, CA USA); M. E. Wangler, International Atomic Energy Agency (Vienna, AUSTRIA)
Chair: W. H. Lake, ASE, Inc. (Silver Spring, MD USA)
Vice Chair: R. S. Hafner, Lawrence Livermore National Laboratory (Livermore, CA USA)
SPENT FUEL REMOVAL AND TRANSFER FOR HANFORD 324 BUILDING DEACTIVATION (Presentation Only) R. J. Smith, Packaging Technology, Inc. (Tacoma, WA USA); R. W. Rasmussen, Mid Columbia Engineering, Inc. (Richland, WA USA)
DESIGN AND DEVELOPMENT OF THE DPP-2 SHIPPING PACKAGE (Presentation Only) M. R. Feldman, BWXT Y-12, L.L.C. (Oak Ridge, TN USA)
TESTING OF THE ES-2100 AND DPP-2 SHIPPING PACKAGES (Presentation Only) M. R. Feldman, BWXT Y-12, L.L.C. (Oak Ridge, TN USA)
RECENT DEVELOPMENTS IN THE DEVELOPMENT OF THE NUPACK CODE (Presentation Only) G. C. Mok, Lawrence Livermore National Laboratory (Livermore, CA USA) SESSION 4.3F (DA- 06)
Thursday, July 24, 2:00 PM - 3:45 PM,
STRESS CLASSIFICATION ISSUES IN THE ANALYSIS OF PRESSURE VESSELS
Sponsored by: Design and Analysis Committee
Published in PVP Vol. 469, DESIGN AND ANALYSIS OF PRESSURE VESSELS AND PIPING: IMPLEMENTATION OF ASME B31, FATIGUE, ASME SECTION VIII, AND BUCKLING ANALYSES
Developed by: D. K. Williams, Sharoden Engineering Consultants (Matthews, NC USA)
Chair: D. K. Williams, Sharoden Engineering Consultants (Matthews, NC USA)
Vice Chair: T. G. Seipp, Fluor Canada (Calgary, AB Canada)
CODE CASE 2286 APPLIED TO THE DESIGN OF PRESSURE VESSELS M. Lengsfeld, K. Bardia, D. LaBounty,and B. Au, Fluor Daniel (Aliso Viejo, CA USA)
DESIGN OF AN OPTIMUM I-BEAM REINFORCEMENT FOR AN API 620 TANK Y. Hari, R. Munjal, and N. Singh, University of North Carolina - Charlotte (Charlotte, NC USA)
CONSIDERATIONS IN THE DESIGN & ANALYSIS OF AN ASME SECTION VIII, DIVISION 2 REACTOR SUPPORT SKIRT D. Williams, Sharoden Engineering Consultants (Matthews, NC USA); T. Seipp, Fluor Canada Ltd. (Calgary, AB CANADA)
QUALIFICATION OF A JACKETED VESSEL USING FINITE ELEMENT ANALYSIS Y. Hari, R. Munjal, and C. Obeid, University of North Carolina - Charlotte (Charlotte, NC USA)
BUCKLING CONSIDERATIONS AND THE USE OF CODE CASE 2286-1 FOR THE ANALYSIS OF A FLUE GAS DESULFURIZATION VESSEL D. Williams, Sharoden Engineering Consultants (Matthews, NC USA)
SESSION 4.3J (SE- 09, FSI- 08)
Thursday, July 24, 2:00 PM - 3:45 PM, SEISMIC RESPONSES OF LIQUID STORAGE TANKS - I
Sponsored by: Seismic Engineering and Fluid-Structure InteractionCommittees
Published in PVP Vol. 466, SEISMIC ENGINEERING - 2003
Developed by: K. Fujita, Osaka Prefecture University (Osaka, JAPAN); J. C. Chen, Lawrence Livermore National Laboratory (Livermore, CA USA); S. Fujita, Tokyo Denki University (Tokyo, JAPAN)
Chair: V. Matzen, Center for Nuclear Power Plant Structures, Equipment, and Piping, North Carolina state University, (Raleigh, NC USA)
Vice Chair: K. Fujita, Osaka Prefecture University (Osaka, JAPAN)
INVESTIGATION ON BUCKLING BEHAVIOR OF CYLINDRICAL LIQUID STORAGE TANKS UNDER SEISMIC EXCITATION (1ST REPORT; INVESTIGATION ON ELEPHANT FOOT BULGE) T. Ito, Osaka Prefecture University (Osaka, JAPAN); H. Morita, K. Hamada, A. Sugiyama, and Y. Kawamoto, Mitsubishi Heavy Industries, Ltd. (Hyogo, JAPAN); H. Ogo, E. Shirai, The Kansai Electric Power Co. (Osaka, JAPAN)
DEVELOPMENT OF A NEW METHOD OF BASELINE CORRECTION ON EARTHQUAKE STRONG MOTIONS AND ITS APPLICATION TO LONG PERIOD SLOSHING RESPONSE MOTIONS OF WATER TANKS DURING STRONG EARTHQUAKES C. Minowa, National Research Institute for Earth Science and Disaster Prevention (Tsukuba, JAPAN)
ROCKING RESPONSE OF UNANCHORED FLAT-BOTTOM CYLINDRICAL SHELL TANKS SUBJECTED TO HORIZONTAL BASE EXCITATION, PART I: RIGID BOTTOM PLATE T. Taniguchi, Tottori University, (Tottori, JAPAN)
CONFIRMATION OF REDUCTION EFFECT DUE TO TANK’S ROCKING BEHAVIOR AND PROPOSAL FOR A SIMPLIFIED EVALUATION METHOD OF NONLINEAR SEISMIC RESPONSE S. Yamaguchi, H. Tazuke, and K. Ishida, Ishikawajima-Harima Heavy Industries Co., Ltd. (Tokyo, JAPAN)
SESSION 4.3K (HPT- 05)
Thursday, July 24, 2:00 PM - 3:45 PM, FATIGUE
Sponsored by: High Pressure Technology Committee
Published in PVP Vol. 455, HIGH PRESSURE TECHNOLOGY: 2003 SHAPING HIGH PRESSURE TECHNOLOGY FOR THE FUTURE
Developed by: J. Keltjens, DSM TechnoPartners, (Geleen, NETHERLANDS)
Chair: J. Keltjens, DSM TechnoPartners, (Geleen, NETHERLANDS)
Vice Chair: W. Hiller, Uhde Hochdruck Technik, (Hagen, GERMANY)
FATIGUE BEHAVIOR OF HIGH PRESSURE TEST-TUBES UNDER CONSIDERATION OF AUTOFRETTAGE M. Poelzl and J. Schedelmaier, Böhler Hochdrucktechnik (Kapfenberg, AUSTRIA)
UTILIZING FINITE ELEMENT ANALYSIS TO ACCURATELY PREDICT FATIGUE LIFE OF AUTOFRETTAGED ULTRA-HIGH PRESSURE COMPONENTS W.W. Ni, Ingelsoll-Rand Waterjet Division (Bryan, OH USA)
DESIGN AND ANALYSIS OF A NEW CROSS FOR ULTRA-HIGH PRESSURE M.K. Sahney, Flow International Corporation (Kent, WA USA)
SESSION 4.3L (MF- 05B)
Thursday, July 24, 2:00 PM - 3:45 PM,
FITTNESS FOR SERVICE ON PIPELINES
Sponsored by: The Materials and Fabrication Committee
Published in PVP Vol. 464, RESIDUAL STRESS, FITNESS-FOR-SERVICE, AND MANUFACTURING PROCESSES (AND) STUDENT PAPER COMPETITION
Developed by: S. A. Timashev, Russian Academy of Sciences (Ekaterinburg RUSSIA)
Chair: S. A. Timashev, Russian Academy of Sciences (Ekaterinburg RUSSIA)
Vice Chair: Y. Y. Wang, Engineering Mechanics Corp. of Columbus, (Columbus, OH USA) STRENGTH OF PIPELINES WITH CORROSION DEFECTS A. O. Chernyavsky, Southern-Ural State University (Chelyabinsk RUSSIA); N. L. Zaitsev, JSC Uraltransgas (Chelyabinsk RUSSIA)
ASSESSMENT OF THE POSSIBILITY OF OPERATING PIPELINES WITH DEFECTS A. O. Chernyavsky, Southern-Ural State University (Chelyabinsk RUSSIA); S. A. Timashev, Russian Academy of Sciences (Ekaterinburg RUSSIA); and N. L. Zaitsev, JSC Uraltransgas (Chelyabinsk RUSSIA)
EXPERIMENTAL ASSESSMENT OF MATERIAL STRENGTH OF TWO OPERATING MAIN OIL PIPELINES S. A. Timashev, Russian Academy of Sciences (Ekaterinburg RUSSIA); O. F. Chernyavsky, and Yu. N. Rebyakov, Southern-Ural State University (Chelyabinsk RUSSIA)
SESSION 4.3N (FSI- 06B)
Thursday, July 24, 2:00 PM - 3:45 PM,
STRUCTURES UNDER EXTREME LOADING CONDITIONS - AIR BLAST LOADINGS ON BUILDINGS AND BUILDING COMPONENTS
Sponsored by: Fluid Structure Interaction Committee
Published in PVP Vol. 454, PROBLEMS INVOLVING THERMAL-HYDRAULICS, LIQUID SLOSHING, AND EXTREME LOADS ON STRUCTURES
Developed by: H. S. Levine, Weidlinger Associates Inc. (Los Altos, CA USA); S.E. Jones, University of Alabama (Tuscaloosa, AL USA); M. L. Hughes, Air Force Research Laboratory - AFRL/MNMW (Eglin AFB, FL USA); D. S. Preece, Sandia National Laboratories (Albuquerque, NM USA)
Chair: H. S. Levine, Weidlinger Associates Inc. (Los Altos, CA USA)
Vice Chair: D. S. Preece, Sandia National Laboratories (Albuquerque, NM USA)
RESPONSE OF AISC STEEL COLUMN SECTIONS TO BLAST LOADING D. Lawver, D. Vaughan, and H. Levine, Weidlinger Associates, Inc. (Los Altos, CA USA); M. Stanley, EMRTC, New Mexico Institute of Mining and Technology (Socorro, NM USA)
BEHAVIOR OF FACILITIES UNDER EXPLOSIVE LOADING DUE TO MALEVOLENT ACTS B. Autrusson, D. Brochard, Institut de Radioprotection et de Surete Nucleaire (IRSN) (Cedex FRANCE) STUDY OF THE DYNAMIC RESPONSE OF LARGE SCALE BUILDINGS USING SIMPLIFIED APPROACHES O. Loiseau, K. Cheval, B. Autrusson, and D. Brochard, Institut de Radioprotection et de Sûrété Necléaire (IRSN) (Cedex FRANCE)
BEHAVIOR OF A BUILDING UNDER EXPLOSIVE LOADING K. Cheval, O. Loiseau, B. Autrusson, and D. Brochard, Institut de Radioprotection et de Sûrété Necléaire (IRSN) (Cedex FRANCE)
BLAST-RESISTANT WINDOW CONCEPTS W. S. Strickland, Air Force Research Laboratory, M. Anderson, Applied Research Associates, Inc., and D. Dover, Israeli Air Force (Tyndall AFB, FL USA)
SESSION 4.3O (CS- 07)
Thursday, July 24, 2:00 PM - 3:45 PM,
PANEL SESSION: POST 9-11 SECURITY ISSUES
Sponsored by: Codes and Standards Committee
Published in PVP Vol. 453, PRESSURE VESSEL AND PIPING CODES AND STANDARDS - 2003
Developed by: K. R. Rao (Brandon, MS USA)
Chair: R. E. Nickell, Applied Science & Technology (Poway, CA USA)
Vice Chair: Richard E. Feigel, Hartford Steam Boiler INSP/INS (Hartford, CT USA)
NUCLEAR PLANT STRUCTURES: RESISTANCE TO AIRCRAFT IMPACT R. E. Nickell, Applied Science & Technology (Poway, CA USA)
TERRORISM RISK MODELS - THE NEED FOR COMMON MEASURES R. E. Feigel, Hartford Steam Boiler Inspection & Insurance Co. (Hartford, CT USA)
ENGINEERED SECURITY MEASURES OF NUCLEAR PLANTS F. J. Moody (Murphys, CA USA)
A COMMON APPROACH TO RISK ANALYSIS METHODOLOGY R. J. Sims, Jr., Becht Engineering Company (Liberty Corner, NJ USA)
PIPE LINE SECURITY - DESIGN OF PIPE TO RESIST BLAST TYPE LOADS J. D. Stevenson, Stevenson & Associates (Cleveland, OH USA)
Block 4.4: Thursday, July 24 (4:00 PM - 5:45 PM)
SESSION 4.4B (CS- 05B)
Thursday, July 24, 4:00 PM - 5:45 PM,
PANEL SESSION: THE PED COMPLIANT SULCIS BOILER
Sponsored by: Codes and Standards Committee
Published in PVP Vol. 453, PRESSURE VESSELS AND PIPING CODES AND STANDARDS - 2003
Developed by: B. T. Lubin, College of Engineering, University of Hartford (West Hartford, CT USA); A. Garbolevsky, HSB Global Standards (Framingham, MA USA)
Chair: A. Garbolevsky, HSB Global Standards (Framingham, MA USA)
Vice Chair: G. Chakrabarti, Westinghouse Electric Company (Madison, PA USA)
THE PED COMPLIANT SULCIS BOILER J. D. Fishburn, Alstom Power Inc. (Windsor, CT USA)
SESSION 4.4C (CT- 02C, MF-15)
Thursday, July 24, 4:00 PM - 5:45 PM,
NEW AND EMERGING COMPUTATIONAL METHODS - III
Sponsored by: Computer Technology, and Manufacturing and Fabrication Committees
Published in PVP Vol. 458, COMPUTER APPLICATIONS AND TECHNOLOGY
Developed by: J. Tang, University of Iowa (Iowa City, IA USA); Y. H. Park, New Mexico State University (Las Cruces, NM USA); B. N. Rao, University of Iowa (Iowa City, IA USA) Chair: Y. H. Park, New Mexico State University (Las Cruces, NM USA)
Vice Chair: J. Tang, University of Iowa (Iowa City, IA USA)
A NEW INTERACTION INTEGRAL METHOD FOR ANALYSIS OF CRACKS IN ORTHOTROPIC FUNCTIONALLY GRADED MATERIALS B. N. Rao and S. Rahman, University of Iowa (Iowa City, IA USA)
RIGID-PLASTIC ANALYSIS OF METAL FORMING USING MESHFREE METHOD Y. H. Park, New Mexico State University (Las Cruces, NM USA)
STUDY ABOUT REAL-TIME FINITE ELEMENT METHOD USING CNN J. Gao, J. Zhang, and M. Xu, Harbin Institute of Technology (Harbin, CHINA)
CRACK SHAPE DEVELOPMENT OF TWO INTERACTING SURFACE ELLIPTICAL CRACKS S. K. Patel, B. Dattaguru, and K. Ramachandra, Indian Institute of Science (Bangalore, INDIA)
DQEM ANALYSIS OF IN-PLANE DEFLECTION OF CURVED BEAM STRUCTURES C.-N. Chen, National Cheng Kung University, (Tainan, TAIWAN)
SESSION 4.4J (SE-10, FSI- 09)
Thursday, July 24, 4:00 PM - 5:45 PM,
SEISMIC RESPONSES OF LIQUID STORAGE TANKS - II
Sponsored by: The Seismic Engineering Committee and the Fluid-Structure Interaction Committee
Published in PVP Vol. 466, SEISMIC ENGINEERING - 2003
Developed by: K. Fujita, Osaka Prefecture University (Osaka, JAPAN); J. C. Chen, Lawrence Livermore National Laboratory (Livermore, CA USA)
Chair: K. Fujita, Osaka Prefecture University (Osaka, JAPAN)
Vice Chair: V. Matzen, North Carolina state University, (Raleigh, NC USA) INVESTIGATION ON BUCKLING BEHAVIOR OF CYLINDRICAL LIQUID STORAGE TANKS UNDER SEISMIC EXCITATION (2ND REPORT; INVESTIGATION ON NONLINEAR OVALING VIBRATION AT THE UPPER WALL) H. Morita, Mitsubishi Heavy Ind. Ltd. (Hyogo, JAPAN); T. Ito, Osaka Prefecture University, (Osaka, JAPAN); K. Hamada, A. Sugiyama, Y. Kawamoto, Mitsubishi Heavy Ind. Ltd. (Hyogo and Nagasaki, JAPAN); H. Ogo, and E. Shirai, The Kansai Electric Power Co. (Osaka, JAPAN)
INVESTIGATION ON BUCKLING BEHAVIOR OF CYLINDRICAL LIQUID STORAGE TANKS UNDER SEISMIC LOADING (3RD REPORT; PROPOSED DESIGN PROCEDURE CONSIDERING DYNAMIC RESPONSE REDUCTION) A. Sugiyama, K. Setta, Y. Kawamoto, K. Hamada, and H. Morita, Mitsubishi Heavy Ind. Ltd. (Hyogo and Nagasaki, JAPAN); T. Ito, Osaka Prefecture University (Osaka, JAPAN); H. Ogo, and E. Shirai, The Kansai Electric Power Co. (Osaka, JAPAN)
FREE VIBRATION AND SEISMIC RESPONSE ANALYSIS OF A LIQUID STORAGE THIN SHELL WITH UNAXISYMETRIC ATTACHED MASS AND STIFFNESS K. Fujita and A. Saito, Osaka Prefecture University (Osaka, JAPAN)
ROCKING RESPONSE OF UNANCHORED FLAT-BOTTOM CYLINDRICAL SHELL TANKS SUBJECTED TO HORIZONTAL BASE EXCITATION, PART II: FLEXIBLE BOTTOM PLATE T. Taniguchi, Tottori University (Tottori, JAPAN) Floor Layout
Superior is on Lower Lobby Level (First Floor)