Product Bulletin for the Toyota Electric Vehicle 30A Charging Station

30 Amp Electric Vehicle Charging Station for Toyota Level 2 EV Charging: 30A, 240V, 7.2kW output

Leviton’s Level 2, 30 amp 240 volt Charging Station has been developed to provide charging rates that will “fill up” your Toyota RAV4 EV in approximately 6.5 to 8 hours and fully charge your Prius Plug-in EV in 1.5 hours. The Charging Station can be cord connected or hardwired and is ideal for home charging and light commercial applications. The 25-foot charging cable offers you the convenience of a variety of mounting locations.

Features and Benefits: n Compatible with all Electric Vehicle Supply Equipment (EVSE) Standards and Recommended Practices, including SAE J1772™, NEC 625, UL 2231, and UL 2594 n Built-in communication verifies proper connection with the vehicle before charging n Auto-Reclosure feature enables charging to restart following a minor 30 Amp power interruption, thereby reducing the chance of being stranded with an uncharged battery n Plug-In unit is capable of being converted to a “hard-wired” installation if required n Enclosure is rated NEMA, Type 4 Watertight. This rating applies to hard-wired applications only Prius Plug-in RAV4 EV Charger n Wrap-around cord management for easy storage between uses Charge Time* Charge Time* n Ground monitor interrupter circuit for additional safety Level 1 ~3 Hours ~44+ Hours n Charge connector lockout hole prevents unauthorized use Level 2, 16A ~1.5 Hours ~12–15 Hours n Industry exclusive 10-year warranty with Leviton-certified installation Level 2, 30A ~1.5 Hours ~ 6.5 - 8 Hours

* Based on a fully depleted battery

1-(855)-5-PLUGIN n Leviton.com/Toyota n [email protected] Features Dimensions 5.19” (131.82mm) Cat No. EVB30-5PT 13.66” 0.21” 3.01” (5.33mm) Cable (346.96mm) (76.45mm) Management System provides for convenient storage

Watertight and dust-tight enclosure for electronic housing 20.36” (517.14mm) Charge Connector lockout hole prevents unauthorized use

SAE J1772™ Compliant Charging Connector Status Indicator lights alert power, charging status and faults Installation The charging station box can not be mounted higher than 48” and 25’ Charging the bottom of the box no lower than 18” from the floor for indoor Cable length applications only per NEC 625. See mounting template in EVK05-M. provides flexibility EVB16-8PT plug-in unit only suitable for flush mounting. For surface in mounting mounting, contact Leviton @ 1-(855)-5-PLUGIN. location Specifications

Electrical Input EVB30-5PT Standards, Code & Recommended Practice

30A (50A dedicated circuit for plug-in Standards for Plugs, Receptacles and Couplers UL 2251 Amperage applications, 40A minimum dedicated for Electric Vehicles circuit for hard-wired applications) Standard for Tests for Safety-Related Controls UL 991 Voltage 208VAC - 240VAC Employing Solid-State Devices Standard for Personal Protection Systems for 50A, 2P (for plug-in applications) UL 2231 Breaker 40A, 2P (for hard-wired applications) Electric Vehicle (EV) Supply Circuits Standard for Software in Programmable Plug Configuration NEMA 6-50P UL 1998 Components Electrical Output Outline of Investigation for Electric Vehicle UL 2594 Supply Equipment Power 7.2kW (30A @ 240V) UL 62 Standard for EV Flexible Cables SAE J1772™ Charge Connector on Charging Connector 25’ (7.62m) long cable Electric Vehicle Conductive Charge Coupler SAE J1772™ Standard Material Specifications NEC Article 625 Electric Vehicle Charging System Equipment Enclosure Valox™ PBT Federal Communications Commission Charge Cable UL Type EV FCC Part 15 Part 15 Radio Frequency Devices Class B Residential Use Environmental Specifications EMI Per UL 2231 Radiated Immunity Risk Operating Temperature -35°C to 50°C Ordering Information Storage Temperature -50°C to 80°C Cat. No Description Enclosure NEMA Type 4 Leviton Electric Vehicle Charging Station: EVB30-5PT For more information call 1-(855)-5-PLUGIN 30 Amp, 7.2kW output, cord-connected (plug-in) or visit Leviton.com/Toyota Installation kit for plug-in applications of EVK05-M or email us at [email protected] EVB30-5PT. Required for plug-in applications

Leviton Manufacturing Co., Inc. 201 N Service Rd, Melville, NY 11747

© 2012 Leviton Manufacturing Co., Inc. All rights reserved. Specifications subject to change without notice. J1772 is a trademark of SAE International. Toyota is a trademark of Toyota Motor Sales, U.S.A., Inc. Valox is a trademark of SABIC Innovative Plastics IP BV. 072512