MICROFILTRATION 02MEMBRANE FILTERS SYRINGE FILTERS VENTING FILTERS BLOOTING MEMBRANES MEMBRANE DISPENSER MICROBIOLOGICAL MONITORS MEMBRANE HARDWARE STERILE DISPOSABLE VACUUM FILTRATION UNITS 26

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 02. 2.1 pharmaceutcal, cosmetcs, etc. beverage,food, industries; ofrange wide procedurescontrola forqualitymicrobiological in used are flters Membrane Membranes are made of diferent polymers andare available inseveral diameters andpore sizes. The microfltraton isslower than the fltraton with the flter papers (depth flters). flter unless otherthe interactons into the flter retain them into the flterthough matrix. goes partcles smaller whilst surface, flter the on remain porosity nominal the than bigger Partcles or collect micro-organisms for analysis from afuid. removeseparate,micro-porouspartcles precise structure.to a They used arewith flters surfaceare flters Membrane bypassing through amicroporousgas) membrane. or (liquid fuid a from contaminants removes which process fltraton technical membrane a is Microfltraton MICROFILTRATION 142 and293mm (other diameters available under request). 90, 50, 47, 25, 13, diameters, diferent seven in and µm, 0.80 and 0.65 0.45, 0.2, sizes, four pore in They supplied are They are alsolowmedia. inextractables andcan be repeatedly and autoclaved. bufers solutons, aqueous sterilize to holders flter disc in use for suited perfectly size pore μm 0.2 the making characteristcs, adsorpton low very with stability thermal and rates fow high combine membranes These performance. reliable ensure rates fow consistent and size pore uniform Its web. polyester inert byan supported internally is that acetate cellulose ofpure composed are membranes and Filtraton applicatons biological samples, aqueous the for proteinfltraton. recommended are MCA, type membranes Acetate Cellulose CHM® MCA Cellulose Acetate membrane flters MEMBRANE FILTERS · Tissue culture media sterilizaton · Biological andclinical analysis · Protein andenzyme fltraton · Aqueous solutons fltraton Applicatons: · High fow rate · Exceptonal dimensional strength andlow bindingcharacteristcs · Low extractables: ensures tests will beclean with consistent results · Compatble to aqueous solutons with pH 4-8, most alcohols, hydrocarbons andoils · Hydrophilic membrane Features: Extractables Chemical compatbility Thermal stability Sterilizaton value Thickness average Material Filter diameter cm Typical values per Flow rates weted with water minimum value, Bubble point PORE SIZES pressure: (100 kPa) diferental ORDER NUMBER MCA080293T MCA080142T MCA080090T MCA080050H MCA080047H MCA080025H MCA080013H MCA065293T MCA065142T MCA065090T MCA065050H MCA065047H MCA065025H MCA045293T MCA045142T MCA045090T MCA045050H MCA045047H MCA045025H MCA045013H MCA020293T MCA020142T MCA020090T MCA020050H MCA020047H MCA020025H MCA020013H 2 for water at 1bar 135 Cellulose acetate membrane With water lessthan 1% compatbility table) Resistant to aqueous solutons inpH range 4-8, to most alcohols, hydrocarbons andto oils(see chemical Max. 180ºC By autoclaving at 121ºCor 134ºC, with gamma-radiaton or with ethylene oxide 22 ml/min 0,2 13 mm, 25mm, 47mm, 50mm, 90mm, 142mm, 293mm (other sizes available under request) 3.5 bar (350kPa) µm µm 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 0.2 0.2 0.2 0.2 PORE SIZE ( 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.65 0.65 0.65 0.65 0.65 0.65 0.45 0.45 µm) TECHNICAL SPECIFICATIONS ORDER INFORMATION 69 ml/min 0,45 2.0 bar (200kPa) DIAMETER ( 90 50 47 25 13 293 142 90 50 47 25 13 293 142 90 50 47 25 13 293 142 90 50 47 25 293 142 µm mm) 130 ml/min 0,65 1.3 bar (130kPa) NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO STERILE µm 200 ml/min 0,8 0.80 bar (80kPa) 25 25 25 100 100 100 100 25 25 25 100 100 100 25 25 25 100 100 100 100 25 25 25 100 100 100 100 QUANTITY/BOX µm

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 27 28

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION · Dimethylsulfoxide acetamide Diethyl · · Chloroform (ethyl) Cellosolve · · n-Butanol · Gasoline · Acetonitrile · Acetone with: compatble are They FS047300S). and FS047300T (ourreferences holder All-glass the with combinaton in HPLC for phases mobile and solvents de-gassing and ultra-cleaning for used Ofen solvents. from removal forpartcle suited perfectly are flters membrane hydrophilic solvent-resistant These solvents. oforganic fltraton the for membranes Cellulose Regenerated - MRC CHM® CHM® MRC Regenerated Cellulose membrane flters · Dioxane · Protein chemistry · Clarifcaton · Ultra-cleaning andde-gassing solvents andmobile phases for HPLC · Partcle removal from organic solvents or mixtures of aqueous andnon-aqueous samples · Filtraton of aqueous andorganic solutons Applicatons: · High mechanical strength · Superior thermal resistance · Low non-specifc adsorpton · Excellent chemical compatbility and resistance to organic solvents · Hydrophilic Features: · Methylene · Isopropanol · Isobutanol · Hexane · Freon TF glycol Ethylene · acetate Ethyl · · Ethanol (96%) acid · Acetc · Xylene Xylene · · Water · Trichlorethane (25%) · acid Trichloroacetc · Toluene · Tetrahydrofuran · Pentane · Methyl ethyl ketone · Methylene chloride Extractables Chemical compatbility Sterilizaton value Thickness average Material Filter diameter cm Typical values per Flow rates weted with water minimum value, Bubble point PORE SIZES pressure: (100 kPa) diferental ORDER NUMBER MRC045293T MRC045142T MRC045090T MRC045050H MRC045047H MRC045025H MRC045013H MRC020293T MRC020142T MRC020090T MRC020050H MRC020047H MRC020025H MRC020013H 2 for water at 1bar 160-200 Regenerated cellulose membrane reinforced with no-woven cellulose 13 mm, 25mm, 47mm, 50mm, 90mm, 142mm, 293mm. (Other sizes available under request). With water lessthan 1% (see chemical compatbility table) Resistant to almost allsolvents (see table above) andto aqueous solutons inthe pH range 3-12 By autoclaving at 121ºCor 134ºC, with gamma-radiaton or with ethylene oxide 16 ml/min 4.7 bar (470kPa) 0,2 µm 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 0.2 0.2 0.2 0.2 PORE SIZE ( µm µm) TECHNICAL SPECIFICATIONS ORDER INFORMATION DIAMETER ( 293 142 90 50 47 25 13 293 142 90 50 47 25 13 mm) 28 ml/min 3.0 bar (300kPa) 0,45 µm NO NO NO STERILE NO NO NO NO NO NO NO NO NO NO NO 100 100 100 QUANTITY/BOX 25 25 25 100 100 100 100 25 25 25 100

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 29 30

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION Available in white, black or green, gridded (3.1 x 3.1 mm) or plain, sterile or non-sterile or box or oneach individual envelopesterile for the sterile versions. plain, the on or printed are mm) number lot and 3.1 identfcaton x Filter tme. preparatory save (3.1 and membranes use ready-to are They gridded green, or black white, in Available chemotaxis. and testng partcle pre-treatment, sample for membranes Nitrate Cellulose CHM® MCN Cellulose Nitrate (Ester) membrane flters cm Typical values per Flow rates weted with water minimum value, Bubble point PORE SIZES Extractables Chemical compatbility Thermal stability Sterilizaton value Thickness average Material Filter diameter pressure: (100 kPa) diferental ORDER NUMBER MCN045047H-S MCN045025H MCN045013H MCN020293T MCN020142T MCN020090T MCN020050H MCN020047H MCN020025H MCN020013H 2 of impurity · Removal of partcles in suspensions to determine the degree further analysis · Pre-fltraton and clarifcaton of samples prior to · Partcle size analysis · Microbiological analysis andpartcle counts · Clarifcaton andsterilisaton of aqueous solutons Applicatons: · Very highfow rate · Autoclavable · Maximum temperature 130ºC · Various colours give the best contrast to the colonies which are to becounted · Very uniform pore structure which ensures homogeneous distributon of the partcles retained on the flter · Made ofsurface Cellulose Nitrate. This material assures excellent retenton andoptmum colony growth · Hydrophilic membrane Features: for water at 1bar Between 90µm and140µm according to diferent pore size Cellulose Nitrate Resistant to aqueous solutons inthe pH range 4-8, to hydrocarbons andto some solvents Max. 130ºC By autoclaving (at 121ºC), with gamma radiaton or with ethylene oxide With water lessthan 1% (see chemical compatbility table) 13 mm, 25mm, 47mm, 50mm, 90mm, 142mm, 293mm. (Other sizes available under request). ml/min 20 0,2 (470 kPa) 4.0 bar µm 0.45 0.45 0.45 0.2 0.2 0.2 0.2 0.2 0.2 0.2 PORE SIZE ( ml/min 69 0,45 (000 kPa) 2.5 bar µm) µm TECHNICAL SPECIFICATIONS ORDER INFORMATION ml/min 130 0,65 (000 kPa) 2.0 bar DIAMETER ( 47 25 13 293 142 90 50 47 25 13 µm ml/min 200 0,8 (000 kPa) 1.4 bar mm) µm ml/min 320 1,2 (000 kPa) 1.0 bar YES NO NO NO NO NO NO NO NO NO STERILE µm ml/min 430 3 (000 kPa) 0.6 bar µm ml/min 570 5 (000 kPa) 0.5 bar µm 100 100 100 25 25 25 100 100 100 100 QUANTITY/BOX ml/min 750 8 (000 kPa) 0.3 bar µm ORDER NUMBER MCN800293T MCN800142T MCN800050H MCN800047H MCN800047H-S MCN800037H MCN800025H MCN800013H MCN500293T MCN500142T MCN500050H MCN500047H MCN500025H MCN500013H MCN300293T MCN300142T MCN300050H MCN300047H MCN300047H-S MCN300025H MCN300013H MCN120293T MCN120142T MCN120090T MCN120050H MCN120047H MCN120047H-S MCN120025H MCN080293T MCN080142T MCN080090T MCN080050H MCN080047H MCN080047H-S MCN080025H MCN080013H MCN065293T MCN065142T MCN065090T MCN065050H MCN065050H-S MCN065047H MCN065047H-S MCN065025H MCN045293T MCN045142T MCN045090T MCN045050H MCN045047H 0.45 PORE SIZE ( 5 3 3 3 3 3 3 3 1.2 1.2 1.2 1.2 1.2 1.2 1.2 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.45 0.45 0.45 0.45 8 8 8 8 8 8 8 8 5 5 5 5 5 µm) ORDER INFORMATION DIAMETER ( 47 13 293 142 50 47 47 25 13 293 142 90 50 47 47 25 293 142 90 50 47 47 25 13 293 142 90 50 50 47 47 25 293 142 90 50 293 142 50 47 47 37 25 13 293 142 50 47 25 mm) NO NO NO YES NO NO NO NO NO NO YES NO YES NO NO NO NO NO NO STERILE NO NO NO NO YES NO NO NO NO NO NO NO NO NO NO NO NO NO YES NO NO NO NO NO NO NO YES NO NO NO 25 100 100 100 100 100 25 25 25 100 100 100 100 100 25 25 25 100 100 QUANTITY/BOX 25 25 100 100 100 100 100 100 25 25 100 100 100 100 25 25 100 100 100 100 100 25 25 25 100 100 100 100 25 25

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 31 32

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION Hydrophobic edge membranes are used mainly in the sterility testng solutons containing antbiotcs. containing solutons testng sterility the in mainly used are membranes edge Hydrophobic counted be to colonies the to contrast best the which colours green). and various black in (white, Available mm. 3.1x3.1 is size grid The box or oneach individual envelope for the sterile versions.the on printed are number lot and identfcaton Filter tme. preparatory save and membranes use ready-to are They microbiological routne in counts colony for packed, quality control. individually and sterile membranes, gridded Nitrate Cellulose analysis microbiological for CelluloseMNGNitrateMNW,griddedMNB, membraneCHM®flters ORDER NUMBER CHM® MNW - Cellulose Nitrate membranes. Black gridandpink hydrophobic edge CHM® MNW - Cellulose Nitrate white membranes. Green gridandfor E.coli and coliforms CHM® MNG - Cellulose Nitrate Green membranes. Dark green grid.For colony counts CHM® MNB - Cellulose Nitrate black membranes. White grid.For the detecton of yeasts andmoulds CHM® MNW - Cellulose Nitrate white membranes. Black grid (*) pack for membrane dispenser 6 mm edge MNW045047H-SGP6 3 mm edge MNW045050H-SGP3 3 mm edge MNW045047H-SGP3 3 mm edge MNW020050H-SGP3 3 mm edge MNW020047H-SGP3 MNW045047M-SV MNW045047H-SV MNG045047M-SV MNG045047H-SV MNB080047M-SW MNB080047H-SW MNB065047H-SW MNB045047M-SW MNB045047H-SW MNW120047H-G MNW120047M-SG MNW120047H-SG MNW120025H-G MNW080047H-G MNW080047M-SG MNW080047H-SG MNW065047H-G MNW065047M-SG MNW065047H-SG MNW045047R-SG (*) MNW045047H-G MNW045047M-SG MNW045047H-SG MNW045025H-G MNW020047H-G MNW020047M-SG MNW020047H-SG PORE SIZE ( 0.8 0.8 0.65 0.45 0.45 1.2 1.2 1.2 1.2 0.8 0.8 0.8 0.65 0.65 0.65 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 0.45 0.45 0.45 0.2 0.2 0.45 0.45 0.45 0.45 µm) ORDER INFORMATION DIAMETER ( 47 47 47 47 25 47 47 47 47 50 47 50 47 47 47 47 47 47 47 47 47 47 47 47 47 25 47 47 47 47 47 47 mm) STERILE YES NO YES YES NO NO YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES NO YES YES NO NO YES YES NO YES YES QUANTITY/BOX 300 100 1000 100 100 100 1000 100 100 100 100 100 100 1000 100 1000 100 1000 100 100 1000 100 100 1000 100 100 100 1000 100 100 1000 100 FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 33 34

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 47 mm. Other pore sizes (2, 3, 5, 8, 12, 14 and 20 µm) are available under request. under available are µm) 20 and 14 12, 8, 5, 3, (2, sizes pore Other mm. 47 and 25 diameters diferent 2 in and µm 1.0 and 0.8 0.6, 0.4, 0.2, 0.1, sizes: pore diferent six in standard as Available size. pore than larger ofcells percent 100 capturing membrane the through moving liquids for control fow Provides microscopy. by identfcaton partcle for is pore Their and precise uniform structure capillary with a narrow The makes pore surface them ideal size distributon. track-etch using flm polycarbonate grade high from manufactured technology. The resultng are membrane is a thin, translucent membranes and microporous polycarbonate Polycarbonate flm with a smooth MPC fat surface. CHM® CHM® MPC Polycarbonate membranes Filter diameter cm Typical values per Flow rates weted with water minimum value, Bubble point PORE SIZES Extractables Chemical compatbility Sterilizaton value Thickness average Material pressure: (100 kPa) diferental ORDER NUMBER MPC020025H MPC010047H MPC010025H 2 · High translucency. · Hydrophilic · Made of highgrade polycarbonate flm Features: · Environmental analysis (detecton of AOX in water) · Water microbiology (analysis for Legionella indrinking water) · Removal of red bloodcells from plasma · Biological tests, cell biology andcell cultures · Cytology · Fluid clarifcaton · Epifuorescence microscopy · Partculate analysis Applicatons: · Sterilisaton: by autoclaving at 121ºCor 134ºC, γ-radiaton or ethylene oxide · Available ashydrophilic or hydrophobic · Low protein binding · Low extractables · A very smooth andshiny surface onboth sidesfacilitates easy sample examinaton · High fow rate for water at 1bar Between 5µm and12µm according to diferent pore size Polycarbonate Low extractables See chemical compatbility table By autoclaving at 121ºC 25 mm, 47mm 2.5 ml/min 0.1 30 psi µm 0.2 0.1 0.1 PORE SIZE (

µm) (*) 10 ml/min 0.2 20 psi µm TECHNICAL SPECIFICATIONS

ORDER INFORMATION DIAMETER ( 25 47 25 33 ml/min 0.4 12 psi µm

mm) 60 ml/min 0.6 9 psi NO NO NO STERILE µm

90 ml/min 0.8 7 psi µm

100 100 100 QUANTITY/BOX 130 ml/min 1.0 6 psi µm

The main applicaton of this membrane flter type is air/gas fltraton. is type flter membrane ofthis applicaton main The ofaqueous media. fltraton of the before methanol fltraton or ethanol with the pre-weted be for must they characteristcs, used hydrophobic their to also Due are they compatbility; resistant. not are types flter other chemical which to acids, and excellent chemicals, aggressive an have flters membrane MTF CHM® low at air of passage unhindered diferental pressures. allowing humidity, air by weted not are they types, flter (hydrophilic) other Unlike hydrophobic. permanently therefore are and (polytetrafuoroethylene) ofPTFE purely made Theyare CHM® MTF PTFE membrane flters Extractables Chemical compatbility Sterilizaton value Thickness average Material Filter diameter cm Typical values per Flow rates weted with water minimum value, Bubble point PORE SIZES pressure: (100 kPa) diferental ORDER NUMBER (*) Also available inother pore sizes under request MPC100047H MPC100025H MPC080047H MPC080025H MPC060047H MPC060025H MPC040047H MPC040025H MPC020047H 2 · Phase separatons · Ventng applicatons · Sterilisaton of air andgases(0.2µm) · Clarifcaton of samples andmobile phases of HPLC andGC (0.45µm) · Clarifying corrosive substances, strong acids andalkalis(0.45µm) · Filtraton of strong acids andaggressive solutons Applicatons: · Extractables with water not detected · · · · Naturally hydrophobic Features: for water at 1bar

Sterilisaton by at 121 ºC or 134ºC or by ethylene oxide ethylene by or 134ºC or ºC 121 at by Sterilisaton Allowing passage of air even at low diferental pressure solutons aggressive and acids strong with Compatble Between 150µm and 250µm according to diferent pore size Polytetrafuoroethylene With water nonedetectable Resistant to almost allchemicals (see chemical compatbility table) By autoclaving at 121ºCor 134ºCand with ethylene oxide 13 mm, 25mm, 47 mm, 50mm, 90mm, 142mm, 293 mm. (Other sizes available under request). (0.2 µm) 0.2 ml/min (0.2 µm) 1.2 bar 0.1 (air), 0.05, 0.1, 0.22, 0.45, 1.0, 3.0, 5.0, 10.0 0.6 0.4 0.4 0.2 PORE SIZE ( 1.0 1.0 0.8 0.8 0.6 µm) (*) TECHNICAL SPECIFICATIONS ORDER INFORMATION (0.45 µm) 0.3 ml/min (0.45 µm) 0.8 bar DIAMETER ( 25 47 25 47 47 25 47 25 47 mm) (1 µm) 1.6 ml/min (1 µm) 0.45 bar NO NO NO NO NO NO NO NO NO STERILE (5 µm) 4 ml/min (5 µm) 0.1 bar 100 100 100 100 100 100 100 100 100 QUANTITY/BOX

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 35 36

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION They are not recommended for use sterilizing cellular solutons, for which applicaton it is advisable to use the the use to advisable is it applicaton which for solutons, cellular membranes. acetate cellulose CHM®MCA sterilizing use for recommended not are They transferof immobilizaton and acids. nucleic formainly techniques, makes them in blotng very which useful adsorpton, non-specifc have high membranes These HPLC. for phases mobile the of clarifcaton and sterilizaton for This type a of being and is solvents, some good samples organic with alternatve compatble most membranes aqueous bases, most to resistant chemically partcularly them making forindicated of sterilizaton and clarifcaton solutons. and alkaline nature hydrophilic of membranes are flters membrane nylon MNY CHM® CHM® MNY Nylon membrane flters ORDER NUMBER (*) Also available inother pore sizes between 0.01and10µm under request MTF100025H MTF045142T MTF045090T MTF045050H MTF045047H MTF045025H MTF045013H MTF020142T MTF020090T MTF020050H MTF020047H MTF020025H MTF020013H MTF500142T MTF500047H MTF500025H MTF100142T MTF100047H · · · Sterilizaton andclarifcaton of aqueous andorganic solvent solutons Applicatons: · · · · · · Made entrely of polyamide Features:

Isolatng Legionella Isolatng HPLCpreparaton sample oxide ethylene or 121ºC) (at autoclaving by Sterilizaton extractables Low stability mechanical High adsorpton non-specifc High Hydrophilic 5 5 5 1 1 1 0.45 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 0.2 0.2 0.2 PORE SIZE ( µm) (*) ORDER INFORMATION DIAMETER ( 142 47 25 142 47 25 142 90 50 47 25 13 142 90 50 47 25 13 mm) NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO STERILE 25 100 100 25 100 100 25 25 100 100 100 100 25 25 100 100 100 100 QUANTITY/BOX 25, 47, 50, 90, 142 and 293 mm (other sizes available under request). under available sizes (other mm 293 and 142 90, 50, 47, 25, diameters: diferent 6 in and µm, 0.45 and 0.2 sizes pore in supplied are and non-sterile, are flters membrane These compatbility. chemical broad and extractables low throughput, and rates fow high provide and Fluoride, Polyvinylidene of made are flters membrane MPV CHM® CHM® MPV PVDF membrane flters Extractables Chemical compatbility Thermail stability Sterilizaton value Thickness average Material Filter diameter cm Typical values per Flow rates weted with water minimum value, Bubble point PORE SIZES pressure: (100 kPa) diferental ORDER NUMBER (*) Also available inother pore sizes between 0.1and5µm under request MNY045293T MNY045142T MNY045090T MNYO45050H MNY045047H MNY045025H MNY045013H MNY020293T MNY020142T MNY020090T MNY020050H MNY020047H MNY020025H MNY020013H 2 · · · · · Filtraton of aqueous andorganic solutons Applicatons: · · · · Hydrophilic Features: for water at 1bar

Protein chemistry Protein Clarifcaton Chromatography Analytcal sample preparaton oxide ethylene or γ-radiaton bar, 1 at 121ºC at autoclaving by Sterilisaton: Excellentcompatbility chemical aggressive with solvents, alcohols and acids extractables Low 125 µm Nylon Low extractables See chemical compatbility table Max. 140ºC By autoclaving at 121ºCand with ethylene oxide 14 ml/min (0.2µm) 3.4 bar (0.2µm) 0.1, 0.2, 0.45, 0.65, 1,2,3,5,10 13 mm, 25mm, 47mm, 90mm, 142mm, 293mm. (Other sizes available under request). 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 0.2 0.2 0.2 0.2 PORE SIZE ( µm) (*) TECHNICAL SPECIFICATIONS ORDER INFORMATION DIAMETER ( 293 142 90 50 47 25 13 293 142 90 50 47 25 13 mm) 28 ml/min (0.45µm) 2.2 bar (0.45µm) NO NO NO NO STERILE NO NO NO NO NO NO NO NO NO NO 100 100 100 100 QUANTITY/BOX 25 25 25 100 100 100 100 25 25 25

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 37 38

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION Chemical compatbility Thermail stability Sterilizaton value Thickness average Material Filter diameter cm Typical values per Flow rates PORE SIZES pressure: (100 kPa) diferental ORDER NUMBER (*) Also available inother pore sizes between 0.1and5µm under request MPV045293T MPV045142T MPV045090T MPV045050H MPV045047H MPV045025H MPV020293T MPV020142T MPV020090T MPV020050H MPV020047H MPV020025H 2 for water at 1bar Between 90µm and100µm according to diferent pore size Polyvinylidene Fluoride (PVDF) See chemical compatbility table Max. 85ºC By autoclaving at 121ºCand with ethylene oxide 25 mm, 47mm, 50mm, 90mm, 142mm, 293mm. (Other sizes available under request). 3 ml/min 0.2 µm 0.45 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 0.2 0.2 0.2 PORE SIZE (*) ( µm) TECHNICAL SPECIFICATIONS ORDER INFORMATION DIAMETER ( 293 142 90 50 47 25 293 142 90 50 47 25 mm) 7 ml/min 0.45 µm NO NO NO NO NO NO NO NO NO NO NO NO STERILE 25 25 25 100 100 100 25 25 25 100 100 100 QUANTITY/BOX CHM® MPP polypropylene membrane flters are suitable for numerous applicatons in chromatography and and chromatography request). under available sizes (other in mm 293 and applicatons 142 90, 50, 47, 25, diameters: diferent 6 in numerous and sizes, pore µm 0.45 and 0.2 in for available are They suitable are flters laboratories. biotechnology membrane polypropylene MPP CHM® samples. solvent organic and aqueous with use its allowing compatbility chemical broad ofer flters These pickedbyup or hand forceps. when or distort ratngs. break tear, crack, not will size membrane the that pore means device of the strength uniform absolute exceptonally The with polypropylene pure of composed are flters membrane polypropylene MPP CHM® CHM® MPP Polypropylene membrane flters Chemical compatbility Sterilizaton value Thickness average Material Filter diameter cm Typical values per Flow rates weted with water minimum value, Bubble point PORE SIZES pressure: (100 kPa) diferental ORDER NUMBER MPP045293T MPP045142T MPP045090T MPP045050H MPP045047H MPP045025H MPP020293T MPP020142T MPP020090T MPP020050H MPP020047H MPP020025H 2 · · · · · Used asasupport for cell growth, fltraton of media andsterilizaton of tssue culture media Applicatons: · · · Hydrophilic Features: for water at 1bar

Ion chromatography Ion HPLCpreparaton sample requiring low levels detecton nm) 230 (< work for biological used solutons other and Pharmaceutcals fltraton solvent organic and Aqueous compatbility chemical Broad extractables Low Between 110µm and120µm according to diferent pore size Polypropylene See chemical compatbility table Autoclave, gamma irradiaton 25 mm, 47mm, 50mm, 90mm, 142mm, 293mm. (Other sizes available under request). 13 ml/min 15 psi 0.2 µm 0.45 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 0.2 0.2 0.2 PORE SIZE ( µm) TECHNICAL SPECIFICATIONS ORDER INFORMATION DIAMETER ( 293 142 90 50 47 25 293 142 90 50 47 25 mm) 22 ml/min 11 psi 0.45 µm NO NO NO NO NO NO NO NO NO NO NO NO STERILE 25 25 25 100 100 100 25 25 25 100 100 100 QUANTITY/BOX

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 39 40

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION (other sizes available under request). under available sizes (other mm 142 and 90 50, 47, 25, 13, diameters: 6 with and µm, 0.45 and 0.2 size pore in standard as supplied are They liquids viscous with even speed, fow Excellent applicatons. science life in use for suited ideally them make They are to designed remove during general partculates fltraton and their low protein and fltraton. drug binding protein characteristcs and applicatons biological solutons aqueous for recommended are flters membrane These is that polymer polyethersulfone resistant. temperature base and acid high a from constructed is membrane flm micro-porous strong This CHM® MPE PES membrane flters Extractables Chemical compatbility Sterilizaton Material Filter diameter Flow rates weted with water minimum value, Bubble point PORE SIZES value Thickness average cm Typical values per pressure: (100 kPa) diferental ORDER NUMBER MPE045142T MPE045090T MPE045050H MPE045047H MPE045025H MPE045013H MPE020142T MPE020090T MPE020050H MPE020047H MPE020025H MPE020013H 2 · Filtraton andsterilisaton of pharmaceutcal solutons · Biological andclinical analysis · Sterilisaton of biological fuids, serum andtssue culture media · Protein and enzyme fltraton and sterilizaton Applicatons: · Sterilisaton: by autoclaving at 121ºC, with γ-radiaton, or ethylene oxide · Low extractables · Low drug andprotein binding · Very low non-specifc adsorpton · Hydrophilic · Made entrely from polyethersulfone Features: for water at 1bar Between 110µm and150µm according to diferent pore size Polyethersulfone (PES) < 2% (<0.015mg/cm By autoclaving at 121ºC, with γ-radiaton, or ethylene oxide See chemical compatbility table 13 mm, 25mm, 47mm, 50mm, 90mm, 142mm. (Other sizes available under request). 15 ml/min 50 - 70psi 0.2 µm 0.45 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 0.2 0.2 0.2 PORE SIZE ( µm) 2 TECHNICAL SPECIFICATIONS ) ORDER INFORMATION DIAMETER ( 142 90 50 47 25 13 142 90 50 47 25 13 mm) 35 ml/min 35 - 50psi 0.45 µm NO NO NO NO NO NO NO NO NO NO NO NO STERILE 25 25 100 100 100 100 25 25 100 100 100 100 QUANTITY/BOX 2.2 and environmental labs. food agricultural, biotechnology, for pharma, in laboratories cover of flters most applicatons the syringe the versions, glass and (4, and 13 non-sterile and and 25), 1, 0.8, sterile 0.7, with 1.2 PES and and PP,diameters 3.1) 0.45, pore (0.2, PVDF,sizes micro-fber), PTFE, Cellulose, Regenerated Nylon, Acetate, (Cellulose membranes of range wide a With easy. and efectve efcient, fast, fltraton provide to flters syringe our Wedesigned have standards. fltraton your raise to choice best the are flters syringe Premium CHM® Premium syringe flters labs. environmental and beverages food, agricultural, biotechnology, pharmaceutcal, the in applicatons of cover range to a wide membranes and formats a ofin variety sizes, available are line Chrodisc and Premium CHM® CHMLAB ofers a wide range of syringe flters designed to provide efcient and fast fltraton of organic and aqueous solutons. SYRINGE FILTERS They are supplied in sterile and non-sterile versions. non-sterile and sterile in supplied Theyare 13 and25mm, to fulfl your fltraton requirements for clarifying/ultra cleaning. diameters: 2 in and µm 5 and 1.2 0.8, 0.45, 0.2, sizes: pore 5 in presented pressures, inlet low at rates fow oferhigh units, Ready-to-use up ml to of100 fltraton liquid. efcient for and quick the are designed SCAflters CHM® syringe SCA · Clarifcaton of aqueous andalcohol solutons · Cell culture · Protein andenzyme fltraton · Biological sample preparaton · HPLC sample preparaton Applicatons: · Up to 100ml of sample · Superior strength and stability · High throughput · Low protein binding · Hydrophilic membrane Features: Cellulose Acetate syringe flters

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 41 42

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION Colouring code PORE SIZES Connectors Material Limits for use Hold-up volume Filtraton area Filter diameter Flow rates cm Typical values per pressure: (100 kPa) diferental ORDER NUMBER SCA500025Q SCA500025H SCA500025K-S SCA500013Q SCA500013K-S SCA120025Q SCA120025H SCA120025K-S SCA120013Q SCA120013K-S SCA080025Q SCA080025H SCA080025K-S SCA080013Q SCA080013K-S SCA045025Q SCA045025H SCA045025K-S SCA045013Q SCA045013K-S SCA020025Q SCA020025H SCA020025K-S SCA020013Q SCA020013K-S 2 for water at 1bar 5.3 cm 0.1 ml Blue 0.2 Female Luer lock inlet, male Luer lock outlet Cyrolite (CY/RO Industries trademarked MBS copolymer) housing Cellulose acetate membrane Max. Temperature 50ºC Housing resists burstng up to 6bar (600kPa) Max. Recommended operatng pressure: 4.5bar (450kPa) 25 mm (also available in13mm) 60 ml/min µm 0.8 0.8 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 0.2 0.2 PORE SIZE ( 5 5 5 5 5 1.2 1.2 1.2 1.2 1.2 0.8 0.8 0.8 2 µm) Yellow 180 ml/min 0.45 TECHNICAL SPECIFICATIONS ORDER INFORMATION µm DIAMETER ( 25 25 25 13 13 25 25 25 13 13 25 25 25 13 13 25 25 25 13 13 25 25 25 13 13 Green 350 ml/min 0.8 mm) µm NO NO YES NO YES NO NO YES NO YES NO NO YES NO YES NO NO YES NO YES NO NO YES NO YES STERILE Red 400 ml/min 1.2 µm 500 100 50 500 50 500 100 50 500 50 500 100 50 500 50 500 100 50 500 50 500 100 50 500 50 QUANTITY/BOX Brown 500 ml/min 5 µm They are supplied in two pore sizes, 0.2 and 0.45 µm, and in three diameters 4, 13 and 25 mm. 25 and 13 4, diameters three in and µm, 0.45 and 0.2 sizes, pore two in supplied Theyare clarifying for recommended and sterilizing HPLC samples up to 200ml are volume. flters syringe these strength, physical and compatbility chemical high their to Due housing. polypropylene a in membrane nylon a ofers flters SNYsyringe CHM® SNY cm Typical values per Flow rates Bubble point PORE SIZES Connectors Materials Limits for use Hold-up volume Filtraton area Filter diameter pressure: (100 kPa) diferental ORDER NUMBER SNY045025Q SNY045025H SNY045013Q SNY045013H SNY045004Q SNY045004H SNY020025Q SNY020025H SNY020013Q SNY020013H SNY020004Q SNY020004H 2 · Biological sample preparaton · HPLC sample preparaton · Sterilizaton of aqueous anddilute organic solvents · Filtraton andclarifcaton of small volumes Applicatons: · Autoclaved · Up to 200ml sample · Wide chemical compatbility range · Hydrophilic Features: for water at 1bar Nylon syringe flters Max. Temperature 121ºC/30min (autoclave) Max. Recommended operatng pressure: 6bar (600kPa) 0.15 ml (25mm) Female Luer Lock inlet, Luer slip outlet Polypropylene housing Nylon membrane 4.8 cm 4 mm, 13mm, 25mm 65 ml/min (25mm) 3.4 bar 0.2 µm 0.45 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 0.2 0.2 0.2 PORE SIZE ( 2 (25 mm) µm) TECHNICAL SPECIFICATIONS ORDER INFORMATION DIAMETER ( 25 25 13 13 4 4 25 25 13 13 4 4 mm) 110 ml/min (25mm) 2.0 bar 0.45 µm NO NO NO NO NO NO NO NO NO NO NO NO STERILE 500 100 500 100 500 100 500 100 500 100 500 100 QUANTITY/BOX

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 43 44

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION vol. <100 ml - Ø 25 mm 25 Ø - ml <100 vol. mm 13 Ø - ml <5 vol. mm 4 Ø - ml <1 vol. fltered: be to volume the on depends ofdiameter choice The mm. 25 and 13, 4, diameters three in and µm, 0.45 and 0.2 sizes, pore two in supplied Theyare analysis. GC or HPLC for samples ofsmall-volume ultra-cleaning reliable and rapid simple, for solvents of range wide a to resistant are units flter syringe ready-to-use CHM® These membranes. cellulose regenerated solvent-resistant and hydrophilic contains units SRC CHM® SRC Connectors Materials Limits for use pressure Diferental (100 kPa) Typical values at 1bar Flow rates Filtraton area (water) Bubble point Pore FILTER DIAMETER · Protein chemistry · Clarifcaton · Sample preparaton for HPLC andGC · Filtraton of aqueous andorganic solutons Applicatons: · Autoclaved · Extremely versatle · Resistant to a wide range of solvents · Low protein adsorpton · Suitable for aqueous solutons andorganic solvents. · Hydrophilic membrane Features: Regenerated Cellulose syringe flters 4 mm Female Luer lock inlet, Luer Slip outlet Polypropylene housing Regenerated cellulose membrane. Max. Temperature 121ºC,30min (autoclave) Burst pressure: 6bar (600kPa) Max. operatng pressure: 4.5bar (450kPa) c) for water b) for methanol a) for hexane 0.07 cm > 2.0bar (0.45µm) > 3.4bar (0.2µm) 0.20 0.5 ml/min 1.5 ml/min 3.5 ml/min µm 2 0.45 1.5 ml/min 3 ml/min 10 ml/min 4 mm 0.07 cm TECHNICAL SPECIFICATIONS µm 2 0.20 10 ml/min 55 ml/min 140 ml/min 13 mm 1.7 cm µm 2 0.45 1.7 cm 30 ml/min 105 ml/min 280 ml/min 13 mm µm 2 0.20 4.8 cm 25 mm 60 ml/min 160 ml/min 230 ml/min µm 2 0.45 4.8 cm 25 mm 100 ml/min 325 ml/min 430 ml/min µm 2 vol. <100 ml - Ø 25 mm 25 Ø - ml <100 vol. mm 13 Ø - ml <5 vol. mm 4 Ø - ml <1 vol. fltered: be to volume the on depends ofdiameter choice The mm. 25 and 13 4, diameters three in and µm, 0.45 and 0.2 sizes, pore two in supplied Theyare cellulose). (Regenerated SRC CHM® by ofered than required is resistance for to small samples are clean volume CHM® STF HPLC flters indicated syringe or where GC chemical higher analysis, STF PTFE ORDER NUMBER SRC045025Q SRC045025H SRC045013Q SRC045013H SRC045004Q SRC045004H SRC020025Q SRC020025H SRC020013Q SRC020013H SRC020004Q SRC020004H · Filtraton of strong acids andaggressive solutons Applicatons: · Autoclaved · Up to 100ml sample · High chemical resistance to most solvents andacids · Hydrophobic Features: · Phase separaton · Degassing solvents · Ventng applicatons · Cleaningof small volume samples for HPLC or GC applicaton which require greater chemical resistance than regenerated cellulose syringe flters. syringe cellulose regenerated syringe flters 0.2 0.2 0.2 0.2 PORE SIZE ( 0.45 0.45 0.45 0.45 0.45 0.45 0.2 0.2 µm) ORDER INFORMATION DIAMETER ( 13 13 4 4 25 25 13 13 4 4 25 25 mm) NO NO NO NO NO NO NO NO NO NO NO NO STERILE 500 100 500 100 500 100 500 100 500 100 500 100 QUANTITY/BOX

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 45 46

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION Connectors Materials penetraton pressure Wetng water Limits for use pressure Diferental (100 kPa) Typical values at 1bar Flow rates Filtraton area (water) Bubble point Pore FILTER DIAMETER ORDER NUMBER STF045025Q STF045025H STF045013Q STF045013H STF045004Q STF045004H STF020025Q STF020025H STF020013Q STF020013H STF020004Q STF020004H 4 mm 0.07 cm > 0.9bar (0.45µm) > 1.4bar (0.2µm) 0.20 Female Luer lock inlet, Luer Slip outlet Polypropylene housing Regenerated cellulose membrane. Max. Temperature 121ºC,30min (autoclave) Burst pressure: 6bar (600kPa) Max. operatng pressure: 4.5bar (450kPa) c) for air b) for methanol a) for ethanol (400kPa) 4 bar 0.45 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 0.2 0.2 0.2 PORE SIZE µm 2 (µm) 0.06 ml/min 4.5 ml/min 2.0 ml/min 0.45 0.07 cm 4 mm (400kPa) 3.0 bar TECHNICAL SPECIFICATIONS µm ORDER INFORMATION 2 DIAMETER 25 25 13 13 4 4 25 25 13 13 4 4 0.5 ml/min 55 ml/min 25 ml/min 0.20 13 mm 1.7 cm (400kPa) 4 bar µm 2 (mm) 0.45 1.7 cm (400kPa) 3.0 bar 1.1 ml/min 105 ml/min 65 ml/min 13 mm NO NO NO NO NO NO NO NO NO NO NO NO STERILE µm 2 0.20 4.8 cm (400kPa) 4 bar 25 mm 1.7 ml/min 160 ml/min 70 ml/min µm 2 500 100 500 100 500 100 500 100 500 100 500 100 QUANTITY/BOX 0.45 4.8 cm (400kPa) 3.0 bar 25 mm 2.2 ml/min 260 ml/min 130 ml/min µm 2 They are supplied in two pore sizes, 0.2 and 0.45 µm, and in three diameters 4, 13 and 25 mm. 25 and 13 4, diameters three in and µm, 0.45 and 0.2 sizes, pore two in supplied Theyare Also available inindividual sterile peel-pack. sample. of ml 100 to Up alcohols. and acids aggressive with even solvents, of solutons. range wide a with biological ofcompatble are They fltraton clarifying and sterilizing for ideal are units flter syringe ready-to-use CHM® These membrane. (PVDF) fuoride polyvinylidene contains SPVunits CHM® SPV PVDF Connectors Materials diferental pressure 23ºC (100kPa) water at 15psi and Typical values for Flow rates Filtraton area Bubble point Pore Size DIAMETERS ORDER NUMBER SPV045025Q SPV045025H SPV045025K-S SPV045013Q SPV045013K-S SPV045004Q SPV045004H SPV020025Q SPV020025H SPV020025K-S SPV020013Q SPV020013K-S SPV020004Q SPV020004H · Protein sequencing · Chromatography · Sterilizing andclarifying fltraton of biological solutons · Sterilizaton of aggressive andnon-aggressive solvent-based mobile phases · Filtraton of aqueous andorganic solutons Applicatons: · Autoclaved · High fow rates · Excellent chemical compatbility · High bindingcapacity · Low protein adsorpton · Hydrophilic membrane Features: Polyvinylidene Fluoride syringe flters 1.7 cm 13 ml/min 0.20 Female Luer Lock inlet, Luer Lock outlet Polypropylene housing PVDF membrane 2.3 bar 13 mm 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 0.2 0.2 0.2 0.2 PORE SIZE ( µm 2 µm) TECHNICAL SPECIFICATIONS ORDER INFORMATION 1.1 bar 0.45 13 mm 50 ml/min DIAMETER ( 25 25 25 13 13 4 4 25 25 25 13 13 4 4 µm mm) 2.3 bar 50 ml/min 4.5 cm 0.20 25 mm NO NO YES NO YES NO NO NO NO YES NO YES NO NO STERILE µm 2 1.1 bar 200 ml/min 0.45 25 mm 500 100 50 500 50 500 100 500 100 50 500 50 500 100 QUANTITY/BOX µm

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 47 48

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION They are supplied in two pore sizes 0.2 and 0.45 µm, and in two diameters 13 and 25 mm 25 and 13 diameters two in and µm, 0.45 and 0.2 sizes pore two in supplied are They nm. 230 below are levels detecton HPLC where in used are flters syringe polypropylene These chromatographyapplicatons. ionsensitveconsistent for resultsanalysisand provideaccurateand extractable to levelslow haveaqueous They with solvents. used be organic can flters syringe ready-to-use CHM® these compatbility, chemical broad their to Due membrane. (PP) Polypropylene contains units SPP CHM® SPP Connectors Materials Pore size DIAMETERS ORDER NUMBER SPP045025Q SPP045025H SPP045013Q SPP020025Q SPP020025H SPP020013Q · Total digest for heavy metals · Ion chromatography · HPLC applicatons. Detecton levels <230nm · Filtraton of aqueous andorganic solvents Applicatons: · Negligible protein binding · Hydrophobic membrane · Broad chemical compatbility Features: Polypropylene syringe flters Female Luer Lock inlet, Luer Lock outlet Polypropylene housing PP membrane 0.2 13 mm µm 0.45 0.45 0.45 0.2 0.2 0.2 PORE SIZE ( µm) TECHNICAL SPECIFICATIONS ORDER INFORMATION 0.45 13 mm DIAMETER ( 25 25 13 25 25 13 µm mm) 0.2 25 mm NO NO NO NO NO NO STERILE µm 0.45 25 mm 500 100 500 500 100 500 QUANTITY/BOX µm They are supplied in two pore sizes, 0.2 and 0.45 µm, and in two diameters 13 and 25 mm. 25 and 13 diameters two in and µm, 0.45 and 0.2 sizes, pore two in supplied Theyare peel-pack. sterile individual in available Also sample. of ml 100 to Up analysis. chromatography for solutons based protein or biological aqueous, of Preparaton are They fltraton. general during partcles remove ideal for use inlifeto science applicatons. designed are units flter syringe ready-to-use CHM® These membrane. (PES) Polyethersulfone contains units SPE CHM® SPE diferental pressure 23 ºC(100kPa) water at 15psi and Typical values for Flow rates Filtraton area Bubble point Pore size DIAMETERS ORDER NUMBER SPE045025Q SPE045025H SPE045025K-S SPE045013Q SPE045013K-S SPE020025Q SPE020025H SPE020025K-S SPE020013Q SPE020013K-S · Tissue culture media sterilizaton · Cell culture · ICchromatography · Protein andenzyme fltraton sterilizaton · Applicatons: · Not autoclaved. Sterilizaton only by gamma irradiaton or ethylene oxide · High fow rates · Wide range of chemical compatbility · Fast fow rates · Low protein binding · Hydrophilic membrane Features: Purifcaton and sterilizaton of aqueous solutons and/or biological samples and/or biological solutons of aqueous sterilizaton and Purifcaton Polyethersulfone syringe flters 8 ml/min 1.7 cm 0.20 2.0 bar 13 mm 0.2 0.2 PORE SIZE ( 0.45 0.45 0.45 0.45 0.45 0.2 0.2 0.2 µm 2 µm) TECHNICAL SPECIFICATIONS ORDER INFORMATION 0.7 bar 0.45 13 mm 12 ml/min DIAMETER ( 13 13 25 25 25 13 13 25 25 25 µm mm) 25 mm 2.0 bar 100 ml/min 0.20 4.8 cm NO NO YES NO YES NO NO YES NO YES STERILE µm 2 0.7 bar 150 ml/min 0.45 25 mm 500 100 50 500 50 500 100 50 500 50 QUANTITY/BOX µm

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 49 50

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION They are available in 0.7 µm, 1.0 µm, 1.2 µm and 3.1 µm. 3.1 and µm 1.2 µm, 1.0 µm, 0.7 in available are They SCA. CHM® µm or 0.45 µm of 0.2 a pre-flter or as clarifed, be to have solutons dirty relatvely when It is useful very partcles. spherical µm for1.2 of98% efciency retenton a with flter fbre glass a contain flters syringe SGF CHM® pre-flter syringe microfber Glass SGF Max. temperature Brust pressure Filtraton area Filter diameter PORE SIZE Connectors pressure Max. operatonal ORDER NUMBER SGF310025Q SGF120025Q SGF100025Q SGF070025Q · Fuel hydraulic fuids andmachined parts · Pre-flter of small volume liquids to avoid saturaton of small-porosity membranes · Fast pre-fltraton of samples with highpartcle load · Filtraton of aqueous andorganic solutons Applicatons: · Not autoclaved. Sterilizaton only by gamma irradiaton or ethylene oxide · Up to 500ml of sample volume · High fow rates · Acrylic binder · Hydrophilic material Features: Glass microfber syringe pre-flter 50 ºC 6 bar 6.2 4.5 bar 25 mm 0.7 µm Female Luer Lock inlet, Male Luer Lock outlet cm 3.1 1.2 1.0 0.7 PORE SIZE 2 (µm) TECHNICAL SPECIFICATIONS ORDER INFORMATION 1.0 µm DIAMETER 25 25 25 25 (mm) 1.2 µm NO NO NO NO STERILE 3.1 µm 500 500 500 500 QUANTITY/BOX Membrane porosity: 0.45 µm, flter diameter 25 mm 25 diameter flter µm, 0.45 porosity: Membrane microfberflter. µm glass 1.0 with are combined PTFE, and (PSE) Polyethersulfone Nylon, Acetate, Cellulose materials, membrane The efciency. preparaton sample enhance flter membrane with combined pre-flter microfber Glass S+GF ORDER NUMBER SCA045025Q+GF SPE045025Q+GF STF045025Q+GF SNY045025Q+GF · HPLC, GC andICchromatography · Prefltraton · Filtraton of organic solutons · Applicatons: Filtratonof solutons aqueous Syringe flter +glassmicrofber preflter MATERIAL Acetate membrane Glass microfber preflter +Cellulose Polyethersulfone membrane Glass microfber preflter + membrane Glass microfber preflter +PTFE membrane Glass microfber preflter +Nylon ORDER INFORMATION (µm) PORE SIZE 1.00 +0.45 1.00 +0.45 1.00 +0.45 1.00 +0.45 (mm) DIAMETER 25 25 25 25 STERILE NO NO NO NO QUANTITY/BOX 500 500 500 500

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 51 52

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION These syringe flters are suitable for a wide range of applicatons in pharmaceutcal, environmental, biotechnology, biotechnology, laboratories. environmental, testng PVDF) agricultural pharmaceutcal, and beverage, and in food and applicatons PP of range PTFE, wide a for (Nylon, suitable are media flters syringe diferent These the with combined edge fltraton. efcient and gear fast a to contributes coloured the of design special The solutons. ofaqueous clarifcaton the for excellent are units flter CHRODISC These industry. the in products flter into laboratory ofthe flter choices of best your syringe one this convert which reliability and consistency membrane, quality high ofer units flter CHRODISC Chrodisc syringe flters · Composite assays · Biofuel analysis · Food analysis · Environmental samples · Routne QC analysis · HPLC, UHPLC, IC,GC · Dissoluton testng · General partcle removal Applicatons: · 0.45µm for most clarifcaton applicatons and0.22µm when fne partculate removal isrequired. · Colour coding to identfy flter membrane · High resoluton print: easy to identfy pore size andmedia · Minimum sample hold-up: syringe flters’ housings are specifcally designedto maximize sample recovery · Sample volume: · Low extractables andlow binding · Special design Features and benefts: <150ml (33mm) <100ml (25mm) <10ml (13mm) NUMBER ORDER XPP045033M XPP045033D XPP020033M XPP020033D XPP045025M XPP045025D XPP020025M XPP020025D XPP045013M XPP045013D XPP020013M XPP020013D XNY045033M XNY045033D XNY020033M XNY020033D XNY045025M XNY045025D XNY020025M XNY020025D XNY045013M XNY045013D XNY020013M XNY020013D XPV045033M XPV045033D XPV020033M XPV020033D XPV045025M XPV045025D XPV020025M XPV020025D XPV045013M XPV045013D XPV020013M XPV020013D XTF045033D XTF045033D XTF020033M XTF020033D XTF045025M XTF045025D XTF020025M XTF020025D XTF045013M XTF045013D XTF045033M XTF020013D PP PP PP PP PP PP PP PP PP PP NYLON NYLON NYLON NYLON NYLON NYLON NYLON NYLON NYLON NYLON NYLON NYLON PVDF PVDF PVDF PVDF PVDF PVDF PVDF PVDF PVDF PVDF PVDF PVDF PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PP PP TYPE MEMBRANE (µm) PORE SIZE 0.45 0.2 0.2 0.45 0.45 0.2 0.2 0.45 0.45 0.2 0.2 0.45 0.45 0.2 0.2 0.45 0.45 0.2 0.2 0.45 0.45 0.2 0.2 0.45 0.45 0.2 0.2 0.45 0.45 0.2 0.2 0.45 0.45 0.2 0.2 0.45 0.45 0.2 0.2 0.45 0.45 0.2 0.2 0.45 0.45 0.2 0.2 0.45 ORDER INFORMATION ORANGE ORANGE PURPLE PURPLE PURPLE PURPLE PURPLE PURPLE PURPLE PURPLE PURPLE PURPLE PURPLE PURPLE YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW RED RED RED RED RED RED RED RED RED RED RED RED COLOUR ORANGE ORANGE ORANGE ORANGE ORANGE ORANGE ORANGE ORANGE ORANGE ORANGE 33 25 25 25 25 13 13 13 13 33 33 33 33 25 25 25 25 13 13 13 13 (mm) DIAMETER 33 33 33 33 25 25 25 25 13 13 13 13 33 33 33 33 25 25 25 25 13 13 13 13 33 33 33 NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO STERILE NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 BOX QUANTITY/ 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 53 54

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 2.3 They are supplied in two pore sizes, 0.2 and 0.45 µm 0.45 and 0.2 sizes, pore two in supplied Theyare These units are easily connected to fermenters or containers. They can work at high pressure. The large fltering fltering large The pressure. high at work can They cm containers. (20 surface or fermenters to connected easily are units These housing. polypropylene a in gauze, polypropylene with membrane PTFE reinforced a contain that units reusable are flters SVT ventng CHM® SVT VENTING FILTERS PORE SIZE Connectors Materials Max. temperature Max. operatonal pressure Hold-up volume Filter housing Filter diameter Filtraton area Sterilizaton Air fow (1bar) ORDER NUMBER STF045050T-S STF045050T STF020050T-S STF020050T · Sterilizaton of air andgases · Ventng of autoclaves Applicatons: · Sterile andnon-sterile versions · Autoclaved · High fow rates · Light weight (approx. 20g) · Reusable flter units (at least 20autoclaving) · Hydrophobic Features: Ventng flters 2 ) makes it possible to work at high air fow rates even with a low pressure diferental. diferental. pressure low a with even rates fow air high at work to possible it makes ) Housing: Polypropylene Membrane: Reinforced PTFE 134 ºC 3.5 bar 0,5 ml 62 mm 50 mm Autoclave up to 10tmes Autoclave at 121ºCor ETO 0.2 20 cm 27 l/min 6-12 mm or stepped barb PORE SIZE ( 0.45 0.45 0.2 0.2 µm 2 µm) TECHNICAL SPECIFICATIONS ORDER INFORMATION DIAMETER ( 50 50 50 50 mm) 32 l/min 0.45 YES NO YES NO STERILE µm 10 10 10 10 QUANTITY/BOX 2.4 requiring rigorous handling. rigorous requiring NC Supported Bio-tr@ns CHMLAB blotng. protein in specially transfers, the all in results excellent ensures nitrate cellulose of pure sensitvity high The content. extractable lower water a have and agent of wetng amounts Minimize NC Pure Bio-tr@ns CHMLAB BIO-tr@ns Pure NC membrane requirements. your per as use diferent and package contents, size, shape, the like membrane, blotng custom can We diferent exhibit membranes of transfer technique. specifc ofa success Bio-tr@ns outcome the afect membrane, ofdirectly can the which types characteristcs to transfer performance several The critcal PVDF procedure. is transfer membranes membrane protein or appropriate blotng acid the nucleic BIO-tr@ns a Selectng of membrane. kinds nylon and 3 membrane ofers nitrocellulose CHMLAB RNA. or transferring of method DNA a as genetcs, proteins, and biotechnology biology, molecular in widely used are membranes Blotng BIO-tr@ns blotngCHM® membrane BLOOTING MEMBRANES · High sensitvites,low backgrounds · Nucleic acid bindingup to 100µg/cm · Multple reprobings · Supported Nitrocellulose Features: · Dot/slot blots · Southerns · Northerns · Protein &inmunoblotng · Westerns Applicatons: · Binding Interacton: hydrophobic &electrostatc · No detergents added · Excellent strength · Compatble with Chromogenic, Radioactve, Fluorescent detecton methods · For process requiring optmum resoluton · 100% Pure Nitrocellulose Features: · Chemiluminescent detecton systems · Biotnylated detecton systems · Dot/slot blots · Southerns · Northerns · Colony/plaque lifs · Multple re-hybridatons Applicatons: CHM® BIO-tr@ns NY CHM® BIO-tr@ns PVDF CHM® BIO-tr@ns NC membrane is one of the most widely used in analytcal and research applicatons. applicatons. research and analytcal in used widely most the of one is membrane membrane recommended for DNA/RNA/Protein transfers with procedures procedures with transfers DNA/RNA/Protein for recommended membrane 2

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 55 56

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION for fuorescent blots dramatcally increase signal for high sensitvity in quanttatve, multplexing applicatons. multplexing quanttatve, in sensitvity high for signal increase dramatcally blots fuorescent for lost. Open pore structure makes bound accessing proteins and removing probes unbound easily. Membranes optmized PVDF Bio-tr@ns CHMLAB BIO-tr@ns PVDF membrane PORE SIZE ROLLS (1/PACK) 22 xcm 20 xcm 15 xcm PORE SIZE 20 cm x3m 30 cm x3m 22 xcm 20 xcm 15 xcm SHEETS (cm) (5/box) 137 132 85 82 20 cm x3m 30 cm x3m ROLLS (1/PACK) CIRCLES (mm) (50/box) SHEETS (cm) (5/box) · Lipopolysaccharide analysis · Glycoprotein visualizaton · Dot/slot blotng · N-terminal protein sequencing · Amino acid analysis · Binding assays · Western blotng · Western blots Applicatons: · Hydrophobic · Nonfammable · No discoloraton · Chemical resistance · Ideal for protein sequencing · Compositon unsuported Polyvinylidene Fluoride Features: membrane has high protein adsorpton, so proteins during transfer or reprobing won’t be be won’t reprobing or transfer during proteins so adsorpton, protein high has membrane PURE NITROCELLULOSE 0.45 BCN04520300R BCN04530300R BCN045220220V BCN045200200V BCN045150150V BCN0450137K BCN0450132K BCN045085K BCN045082K BPV04520300R BPV04530300R BPV045220220V BPV045200200V BPV045150150V SHEETS (5/box) 0.45 µm µm ORDER INFORMATION ORDER INFORMATION 0.20 BCN02020300R BCN02030300R BCN020220220V BCN020200200V BCN020150150V BCN020137K BCN020220220V BCN020085K BCN020082K µm 0.45 SUPPORTED NITROCELLULOSE BCNS04520300R BCNS04530300R BCNS045220220V BCNS045200200V BCNS045150150V BCNS0450137K BCNS0450132K BCNS045085K BCNS045082K 0.20 BPV02020300R BPV02030300R BPV020220220V BPV020200200V BPV020150150V µm µm 0.20 BCNS02020300R BCNS02030300R BCNS020220220V BCNS020200200V BCNS020220220V BCNS020137K BCNS020132K BCNS020085K BCNS020082K µm allow for numerous reprobings. reprobings. numerous for allow Nylon Charged Reprobing Bio-tr@ns CHMLAB probe and allows efcient removal of unhybridized probe, thereby reducing background. reducing thereby probe, ofunhybridized removal efcient allows and probe Nylon. Neutral Bio-tr@ns CHMLAB BIO-tr@ns NYLON membrane · Alkaline blotng · UV crosslinking · Multple reprobings · Radiolabelled andnon-radiolabelled detecton systems · Southerns · Northerns Applicatons: · Provide consistent results through 12or more reprobings · Nucleic acid binding is450µg/cm · Positvely Supported charged nylon membrane Features: · Macroarrays · Microarrays · Protein binding · Southerns · Northerns · Chromogenic, radioactve, fuorescent detecton systems · Clarifcaton of aqueous solutons · Cell culture · Dot/slot blotng · Colony/plaque lifs Applicatons: · Hydrophilic · Chemical resistance · Versatle adsorpton propertes · High sensitvity · High strength Features: Open pore structure permits maximum accessibility of target sequences to the the to sequences target of accessibility maximum permits structure pore Open 2 is an inherently charged nylon membrane, specifcally designed to to designed specifcally membrane, nylon charged inherently an is

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 57 58

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 2.5 band slippage or even flter damaged membranes. avoids accessible; reliably and quickly membrane each makes dispenser the reels, in pack special the to Thanks design makeseasy it for seal and open to its storage. and band, pleated special a on sealed individually flters membrane reels. 300 in contains box packed reel membrane membranes Each nitrate cellulose sterile-packaged individually for designed is dispenser membrane This equipment. laboratory advanced on placed requirements all meets dispenser flter membrane new completely The MEMBRANE DISPENSER MNB080047R-SW MNB045047R-SW MNB020047R-SW MNW080047R-SG MNW045047R-SG MNW020047R-SG MD001 20 cm x3m 30 cm x3m 22 xcm 20 xcm 15 xcm SHEETS (cm) (50/box) 137 132 85 82 PORE SIZE ORDER NUMBER ROLLS (1/PACK) CIRCLES (mm) (50/box) · · · · · Compact androbust design Features:

Low weight for easy transport easy for weight Low cleaning easy and quick allows design The tme same the at membranes ofseveral dispensing unwanted prevents system control The package membrane complete a having even without reels, membrane ofthe Easyinserton DESCRIPTION NYLON Pore size 0.80 µm Diameter 47mm Black cellulose nitrate membrane. Pore size 0.45 µm Diameter 47mm Black cellulose nitrate membrane. Pore size 0.20 µm Diameter 47mm Black cellulose nitrate membrane. Pore size 0.80 µm Diameter 47mm Cellulose nitrate membrane. Gridded. Pore size 0.45 µm Diameter 47mm Cellulose nitrate membrane. Gridded. Pore size 0.20µm Diameter 47mm Cellulose nitrate membrane. Gridded. Membrane dispenser BNY04520300R BNY04530300R BNY045220220V BNY045200200V BNY045150150V BNY0450137K BNY0450132K BNY045085K BNY045082K 0.45 µm ORDER INFORMATION ORDER INFORMATION 0.45 NYLON REPROBING CHARGED QUANTITY BNYR04520300R BNYR04530300R BNYR045220220V BNYR045200200V BNYR045150150V BNYR0450137K BNYR0450132K BNYR045085K BNYR045082K 300 300 300 300 300 300 1 µm 2.6 Funnel adaptors onto bases are provided in each box. All units are supplied sterile and individually wrapped. wrapped. individually and sterile supplied are units box. All each in provided are bases onto adaptors Funnel manifold. ofa vacuum bases the onto placed be to designed units flter use to ready are Monitors 100 Biofun® reducton. this to due results reproducible make and error ofexternal chance the reduce units fltraton All-in-one and membrane. funnel between cross-contaminaton eliminate that virtually materials single-use to the thank contaminaton Reduced 70%. to byup reduced be can tme testng samples, between base or flter funnels sterilize to need no with and required No faming culturing. for incubated and labelled be can which dish, Petri a to converts easily unit Filtraton food, cosmetcs, beverages, water andother liquids. pharmaceutcals, in they and microorganisms of samples enumeraton and aqueous ofdetecton the types for all designed in specifcally are contaminants monitoring for suited are units ml 100 ready-to-use These analysis. for makes ideal them flter microbiological funnels of microbiological these constructon sterile The all-in-one plug. and lid removable membrane, pad, base, funnel, flter measured a of consistng to unit fltering technique pre-sterilized single-use, a fltraton is monitor Each membrane the in used samples. be aqueous from to microorganisms designed recover are monitors microbiological sterile Biofun CHM® CHM® Biofun microbiological monitors M100-MNB080056K-SW M100-MNB080047K-SW M100-MNB045056K-SW M100-MNB045047K-SW M100-MNB020047K-SW M100-MNW080047K-SG M100-MNW045056K-SG M100-MNW045047K-SG M100-MNW020056K-SG M100-MNW020047K-SG RDER UMBER · Easy handling · Reproducible results · Reduced contaminaton. · No faming required: minimizes the risk of cross-contaminaton · Rapid testng. Testng tme can be reduced by up to 70% · All-in-one system. Features and Benefts: MCRBGCA MTRS Black MCE griddedmembrane with pad Black MCE griddedmembrane with pad Black MCE griddedmembrane with pad Black MCE griddedmembrane with pad Black MCE griddedmembrane with pad White MCE griddedmembrane with pad White MCE griddedmembrane with pad White MCE griddedmembrane with pad White MCE griddedmembrane with pad White MCE griddedmembrane with pad MEMBRAE TPE ORDER INFORMATION · Wine · Beer · Dairy products · Sof drinks · Water (potable and waste) Applicatons. Microbiological analysis of: 0.8 0.8 0.45 0.45 0.2 0.8 0.45 0.45 0.2 0.2 (µm) SZE PRE DAMETER 56 47 56 47 47 47 56 47 56 47 (mm) STERE YES YES YES YES YES YES YES YES YES YES PAC UTS 50 50 50 50 50 50 50 50 50 50

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 59 60

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 2.7 Funnel and flter support can be autoclavable and fame sterilisable fame and autoclavable be can support flter and Funnel rinsing and cleaning efcient and easy facilitates surface polished Highly the can on residues holder the ofeach for distributon vacuum homogenous membraneflter surface. the a ensures ports, frit manifold steel the stainless on The individually. taps of and steel on stainless turned be the to due units, branch 6 or 3 the In funnels. capacity the ml 500 and ml 100 on 40, in and funnels, retained fltraton 6 and 3 1, with available are microorganisms and 304 of AISI made are or manifolds The partcles the which in applicatons membraneflter surface are of interest. for specifcally designed been have They stopcock. a with port one ofany usage independent allow manifolds CHM®FR 1-, 3-and 6-branch CHM®FR manifold MEMBRANE HARDWARE FR6x500 FR6x100 FR3x500 FR3x100 FR1x500 FR1x100 FR1x040 ORDER NUMBER Sterilizaton Membrane flter Materials FILTRATION AREA VP086KN18 VP022AT18 ORDER NUMBER Sanitzaton with faming By autoclaving at (121ºCor 134ºC)or dry heat (180ºC). 47 /50mm diameter Silicone sealingringsfor lid,cap andhosenipple connector Silicone fat gaskets. Stainless steel manifold, funnels, lids,clamps andflter supports. 12.5 cm 2 ORDER INFORMATION VACUUM PUMPS 6 6 3 3 1 1 1 NO. OF BRANCH MANIFOLD PPS Aluminium PUMP HEAD TECHNICAL SPECIFICATIONS ORDER INFORMATION EPDM PTFE-coated DIAPHRAGM 500 ml 100 ml 500 ml 100 ml 500 ml 100 ml 40 ml FUNNELS VOLUME FPM Stainless steel VALVES 6 15 (Rate (l/min) MAX FLOW ground glass outer and inner joints to connect to the receiving glass or with silicon stopper connector. stopper silicon or with glass receiving the to connect to joints inner and outer glass ground with: supplied is fask receiving and connector vacuum with base and funnel ofglass composed system The solids. suspended of collecton for and countng colony for Recommended surface. flter the on partcles retained of distributon uniform the It ensures support. flter frit a glass with are supplied holders flter all-glass versatle These CHM® Glass flter holders Filter holders · · Filter holder for volumes up to 100ml (25mm membrane diameter) · holders: of flter ranges 3 ofering is CHMLAB fltered, be to ofsample type the and volume the on Depending applicatons. the of functon in materials diferent in These made are samples. devices aggressive and reusable aqueous of sterilisaton and clarifcaton for designed specially are holders flter The Re-usable CHM® flter holders

Filterholder for volumes membranemm diameter) 50 more and with (47 ml 100 than Filterholder for membranemm diameter) volumes(13 ml 10 to up FS047300S FS047300T ORDER NUMBER Glass fltraton system for 47mm (or 50mm) membranes without stopper Glass fltraton system for 47mm (or 50mm) membranes with stopper DESCRIPTION ORDER INFORMATION

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 61 62

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION Filter supports in the top and botomallowFilter and parts top the in supports fltraton either in directon. supplied. tool tghtening the using part botom the on mounted be easily can part top The ºC). 180 (max. heat by dry or ºC) 134 (max. byautoclaving Sterilisaton: membrane type. used flter the on only depends compatbility chemical the and good, extremely is resistance temperature The ring. sealing a without sealing proof leak ensures and holder flter the of property important an is part top the on surface PTFE-coated The chemicals. and solvents for holder inox HIN CHM® CHM® HIN Stainless steel flter holder The transparent top part allows the visual control of the correct ft. correct ofthe control visual the allows part top transparent The pressure. ofoperatng bar 7 to up pressure; to resistance excellent an has holder The botomallowFilter and parts top the in supports fltraton either in directon. 121°C). (max. byautoclaving sterilized be can It cycles. washing and working numerous withstands material polycarbonate The sealing. proof leak for gasket silicone a contains and polycarbonate ofstable made is holder flter HPC CHM® This solutons. aqueous for holder Polycarbonate HPC CHM® CHM® HPC Polycarbonate flter holder HIN047001 HIN025001 ORDER NUMBER cm Typical values per Flow rates Filtraton area MEMBRANE FILTER pressure: (100 kPa) diferental cm Typical values per Flow rates Filtraton area MEMBRANE FILTER Connectors Sterilizaton Chemical compatbility pressure Max. operatng pressure: (100 kPa) diferental 2 2 for water at 1bar for water at 1bar 0.5 cm 35 ml/min (0.45µm flter) 18 ml/min (0.2µm flter) 13 mm 25 mm 3 cm Luer slip outlet Female Luer Lock inlet, By autoclaving (max 134ºC)or by dry heat (max 180ºC) As for stainless steel andPTFE 7 bar (700kPa) 80 ml/min (0.45µm flter) 45 ml/min (0.2µm flter) 2 2 INOX INOX MATERIAL TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS ORDER INFORMATION 110 ml/min (0.45µm flter) 70 ml/min (0.2µm flter) 3 cm 25 mm 2 47 25 DIAMETER (mm) 20 bar (2000kPa) 1.0 l/min (0.45µm flter) 0.5 l/min (0.2µm flter) 47 mm (in line) Hose nipples DN10 13 cm 2 12.5 cm 320 ml/min (0.45µm flter) 150 ml/min (0.2µm flter) 47 mm (in line) 1 1 QUANTITY/PACK 2 contnue onnext page >> flter base. onto tghtened the is top the when ofmembrane the twistng avoids and ring, a sealing without proof sealing leak ensures ofholder the constructon The methods. analytcal for reagents and samples from removal partcle for indicated is It 180ºC. at byheat dry Autoclavable Easycleaning. be released into the liquid beingfltered. could which elements trace no contains and compatbility chemical broad a has holder this of PTFE, completely Made chemicals. aggressive and solvents organic for holder flter HTF CHM® CHM® HTF PTFEflter holder Connectors Sterilizaton Chemical compatbility Materials pressure Max. operatng Connectors Sterilizaton Chemical compatbility Materials pressure Max. operatng HPC047012 HPC047001 HPC025012 HPC025001 HPC013012 HPC013001 ORDER NUMBER MEMBRANE FILTER HTF013001 ORDER NUMBER cm Typical values per Flow rates Filtraton area MEMBRANE FILTER pressure: (100 kPa) diferental 2 for water at 1bar Female Luer Lock inlet, Luer slip outlet By autoclaving (max 121ºC) As for polycarbonate andsilicone 7 bar (700kPa) Female Luer Lock inlet, Luer slip outlet By autoclaving (max 134ºC)or by dry heat (max 180ºC) As for PTFE 5 bar (500kPa) Silicone gasket 20.5x26.5mm Polycarbonate top andbotom parts 13 mm PTFE top andbotom part 0.5 cm 18 ml/min (0.45 µm flter) 10 ml/min (0.2 µm flter) 13 mm 2 Polycarbonate Polycarbonate Polycarbonate Polycarbonate Polycarbonate Polycarbonate MATERIAL PTFE MATERIAL TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS ORDER INFORMATION ORDER INFORMATION 25 mm 47 47 25 25 13 13 DIAMETER (mm) 13 DIAMETER (mm) Hose nipples 47 mm (in line) 12 1 12 1 12 1 QUANTITY/PACK 1 QUANTITY/PACK

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 63 64

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 2.8 connector for vacuum fltraton of your valuable laboratory samples. laboratory of your valuable fltraton for vacuum connector receiver hose with adaptor neck a polyethylene polystyrene includes Also a choices. flter a ofof with variety membrane funnel flter and botle consists system new The extractable. and binding protein low extremely with throughput and fow-rates highest combine and PVDF) Hydrophilic and Nylon Acetate, high Cellulose a MCE, contain (PES, units membranes The quality solutons. aqueous other and fuids biological media, culture tssue culture, cell storing and CHM units fltraton vacuum disposable sterile VacFILSeries CHM® STERILEDISPOSABLE VACUUM · PVDF (Polyvinylidene fuoride). Extremely low protein-binding. For fltraton of non-aggressive aqueous and · Nylon. Provides abroad range of chemical compatbility for the fltraton of either aqueous or organic · CA (Cellulose Acetate). Fast fow rates and low protein binding are good for fltering cell culture media. · MCE (Mixed Cellulose Ester) for sterile fltraton, prefltraton or clarifcaton of bufers andother aqueous · PES (Polyethersulfone) with low protein bindingandlow extractable are the best choice for sterile fltraton Membranes: · Sterile, individually packed · Detergent-free · Non-pyrogenic · Light weight andheavy wall constructon · Membrane diameter: 50and90mm · Three receiver botle volumes: 250,500and1000ml · Two funnel volumes: 250and500ml · Two membrane pore sizes: 0.22μm and0.45μm · Available in5diferent membranes: PES, MCE, Cellulose Acetate, Nylon andHydrophilic PVDF Features: ® mild organic solutons, or organic mild solutons, wereprotein maximizing recovery important. is solvents; hydrophilic; it can be used in a broad pH range. Surfactant-free and ofer the lowest extractable. solutons when protein bindingtrace isnot aconcern. PVDF. than rates fow faster Substantally bufers. and additves serum, media, culture cell of VacFILSeries are single-use vacuum fltraton units for sterile and vacuum fltraton, mainly used for fltering fltering for used mainly fltraton, vacuum and sterile for units fltraton vacuum single-use are VacFILSeries FILTRATION UNITS

VF10500NY022T-S VF10500CA022T-S VF10500CN022T-S VF10500PE022T-S VF05500PV045T-S VF05500NY045T-S VF05500CA045T-S VF05500CN045T-S VF05500PE045T-S VF05500PV022T-S VF0550NY022T-S VF05500CA022T-S VF05500CN022T-S VF05500PE022T-S VF05250PV045T-S VF05250NY045T-S VF05250CA045T-S VF05250CN045T-S VF05250PE045T-S VF05250PV022T-2 VF05250NY022T-S VF05250CA022T-S VF05250CN022T-S VF05250PE022T-S VF02250PV045T-S VF02250NY045T-S VF02250CA045-T-S VF02250CN045T-S VF02250PE045T-S VF02250PV022T-S VF02250NY022T-S VF02250CA022T-S VF02250CN022T-S VF02250PE022T-S ORDER NUMBER VF10500PV045T-S VF10500NY045T-S VF10500CA045T-S VF10500CN045T-S VF10500PE045T-S VF10500PW022T-S 1000 ml Receiver capacity: 500 ml Funnel capacity: 500 ml Receiver capacity: 500 ml Funnel capacity: 500 ml Receiver capacity: 250 ml Funnel capacity: 250 ml Receiver capacity: 250 ml Funnel capacity: FUNNEL CAPACITY 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 90 DIAMETER (mm) ORDER INFORMATION 0.45 0.22 0.45 0.22 0.45 0.22 0.45 0.22 PORE SIZE (µm) MATERIAL MEMBRANE PES PVDF NYLON CA MCE PES PVDF NYLON CA MCE PES PVDF NYLON CA MCE PES PVDF NYLON CA MCE PES PVDF NYLON CA MCE PES PVDF NYLON CA MCE PES PVDF NYLON CA MCE PES PVDF NYLON CA MCE 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 QUANTITY/BOX

FILTRATION & MICROFILTRATION - NEW POSSIBILITIES IN FILTRATION 65