Blue Paper Orca Omx 2020 2 | Orbea Technical Manual Blue Paper Orca Omx 2020 Orbea

TECHNICAL MANUAL

BLUE PAPER ORCA OMX 2020 2 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 3 INDEX

GEOMETRY & SIZING 4 TECHNICAL SPECIFICATIONS 6 HEADSET 8 AXLES AND DERAILLEUR HANGER 10 FRAME HARDWARE 14 SEATPOST 16 ICR01 STEM 21 CABLING 25 HEADSET SPACERS/CUTTING THE STEERER TUBE 29 MAINTENANCE 30 WARRANTY 32 4 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 5

GEOMETRY & SIZING

SIZE 47 49 51 53 55 57 60

1 - Seat tube (c-t) 440 460 480 500 520 540 570

2 - Top tube (eff) 510,45 523,24 535,84 548,51 560,43 576,13 589,97

3 - Head tube 105,6 113,2 129,6 147,9 168 186,2 213,3

4 - Chainstay 408 408 408 408 408 408 408

5 - Bb height 264 264 264 266 266 266 266

6 - Bb drop 72 72 72 70 70 70 70

7 - Wheelbase 971,9 976 980 981,17 991,39 1001,86 1015,7

8 - Head angle 71º 71,5º 72,20º 72,80º 73,00º 73,20º 73,20º

9 - Seat angle 74,5º 74º 73,7º 73,5º 73,5º 73,2º 73,2º

10 - Standover heigh 726,48 739,84 758,48 778,84 799,12 817,55 845,06

11 - Reach 370,08 375,56 380 385 391,02 398 404

12 - Stack 506,06 515 533 552 571,92 590 616

13 - Fork length 370 370 370 370 370 370 370

HEIGHT (CM) HEIGHT (IN) SIZE

155-160 61.1”-63.0” 47

160-166 63.0”-65.4” 49

167-172 65.7”-67.7” 51

173-179 68.1”-70.5” 53

180-185 70.9”-72.8” 55

186-191 73.2”-75.2” 57

192-207 75.6”-81.5” 60

*The sizing measurements are orientative. **The ICR01 stem is available in sizes from 80mm to 130mm in 10mm increments. 6 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 7

TECHNICAL SPECIFICATIONS

MATERIAL BIG OVAL CHAINRING MAX. SIZE 55T

FRAME ORBEA CARBON OMX SMALL OVAL CHAINRING MAX. SIZE 42T

FORK ORBEA CARBON OMX TRIPLE CRANKSET NO

AVAILABLE SIZES 47-49-51-53-55-57-60 DERAILLEUR HANGER STANDARD AND DIRECT MOUNT

STEM ORBEA COMPONENTS ICR01 (INTERNAL CABLING) ONLY SHIMANO 11V DRIVETRAIN COMPATIBILITY SRAM 11V Y 12V FORK RAKE 48mm(SIZES 47, 49, 51) and 43mm (TALLAS 53, 55, 57, 60) CAMPAGNOLO 11V MAXIMUM HEADSET SPACERS STACK 40MM FRONT BRAKE DISC ONLY. FLAT MOUNT 140MM

FORK STEERER TUBE TAPERED 1 1/8-1,5 MAX. FRONT ROTOR DIAMETER 160MM

WHEEL SIZE 700C. 28” REAR BRAKE DISC ONLY. FLAT MOUNT 140MM

MAXIMUM TYRE WIDTH 700x32C MAX. REAR ROTOR DIAMETER 160MM

BOTTOM BRACKET BB386EVO. DIAMETER 46MM CALIPER BOLT LENGHT 30MM 1” 1/2-1” 1/2 (UPPER BEARING WITH 1 1/8-1 1/5 ADAPTER HEADSET BEARINGS INTERNAL (BRAKE AND GEARS) IN DOWNTUBE AND CHAINSTAYS FOR INTERNAL CABLING) CABLING WITH OUTER CABLE IN DOWNTUBE INTERNAL BRAKE CABLE ROUTING IN FORK BLADE FRONT AXLE 12X100 BOTTLE HOLDER 2 FRONT AXLE THREAD PITCH MAVIC SPEED RELEASE P1.0 YES. INTERNAL BATTERY ONLY. REAR AXLE STANDARD 12x142 COMPATIBLE DI2 Y EPS BATTERY HOLDER SPECIFIC ORCA OMX SEATPOST EPS ONLY WITH BATTERY V3 REAR AXLE THREAD PITCH MAVIC SPEED RELEASE P1.0 MUDGUARD COMPATIBLE NO REAR DROPOUTS THRU-AXLE/SPEED RELEASE RACK COMPATIBLE NO SEATPOST DIAMETER AERO ORCA OMX SPECIFIC

SEATPOST CLAMP ORCA OMX SPECIFIC (INTEGRATED) SRM: YES (11S Y 10S) POWER2MAX: YES STAGES: CHECK STAGES COMPATIBILITY DOCUMENTATION MINIMUM INSERTION 90MM POWERMETER COMPATIBILITY ROTOR POWER: YES SEATPOST LENGHT 350MM QUARQ: YES POWERTAP: YES FRONT DERAILLEUR DOWNPULL. BRAZE-ON UCI LEGAL YES FRONT DER. ANGLE 63º

BIG CHAINRING MAX. SIZE 55T

OVAL CHAINRING COMPATIBLE YES 8 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 9

HEADSET 3

1.2 Ø 52.1±0.05

+0 6.6 45º -0.2

1.1

ORCA OMX HEADSET BEARINGS 01 KIT Nº: Y0000166 QUANTITY 1.1 LOWER BEARING 1-1/2 1 1.2 UPPER BEARING 1-1/2 INTERN. CABLING 1

COMPRESSION RING. INTERNAL CABLING 02 ART Nº: 14030103 QUANTITY +0 5.5 COMPRESSION RING. INTERNAL CABLING 1 -0.2

Ø 52.1±0.05 HEADSET-FRAME CAP INTERN. CABLING 03 ART Nº: 11030033 QUANTITY HEADSET-FRAME CAP INTERN. CABLING 1 10 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 11

AXLES AND DERAILLEUR HANGER FRONT AXLE

STANDARD ORCA OMX DER. HANGER 7 04 KIT Nº: Y0000157 QUANTITY 4.1 DER. HANGER ROAD 20 X12 1 4.2 BOLT M4x12 1

8 DIRECT MOUNTORCA OMX DER. HANGER 05 KIT Nº: Y0000158 QUANTITY 5.1 DM DER. HANGER ROAD 20 X12 1 5.2 BOLT M4x12 1

NUT M18 HANGER X12 ORCA OMX

6 17 06 ART Nº: 12310052 QUANTITY 4 Nm NUT M18 HANGER X12 ORCA OMX 1

5.1 THRU-AXLE ROAD 12X142 THREAD PITCH 1.0 4.1 07 ART Nº: 11100094 QUANTITY THRU-AXLE ROAD 12x142 THREAD PITCH 1.0 1 5.2

4.2 MAVIC SPEED RELEASE AXLE 12X142 08 ART Nº: 11103397 QUANTITY MAVIC SPEED RELEASE AXLE 12x142 1

Orca OMX is only compatible with thru axles with the Mavic Speed Release standard, with a specific thread pitch “double lead” P1 for faster wheel removal. 12 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 13

AXLES AND DERAILLEUR HANGER USE OF MAVIC SPEED RELEASE AXLES REAR AXLE

1. Turn anti-clockwise

3. Remove the wheel pushing downwards.

2. Pull from the axle until it is out of the left dropout (front wheel) or right dropout (rear wheel). THRU-AXLE ROAD 12X100 THREAD PITCH 1.0 09 ART Nº: 11100093 QUANTITY THRU-AXLE ROAD 12x100 THREAD PITCH 1.0 1 TRAINER AXLE COMPATIBILITY MAVIC SPEED RELEASE AXLE 12X100 To use Orca OMX on a trainer, it is necessary to use a 10 ART Nº: 11103396 QUANTITY specific trainer axle with the Mavic Speed Release thread MAVIC SPEED RELEASE AXLE 12x100 1 pitch. Using a non-compatible axle will damage the frame.

Orca OMX is only compatible with thru axles with the Mavic Speed Release standard, with a specific thread pitch “double lead” P1 for faster wheel removal. 14 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 15

FRAME HARDWARE

5 8 Nm ORCA OMX FRONT DERAILLEUR HANGER 12 KIT Nº: Y0000161 QUANTITY 12.1 FRONT DERAILLEUR HANGER 1 12.2 BOLT M5x16 2 17

13.1 DOWNTUBE DI2/MECH COVER

16 13.2 13 KIT Nº: Y0000162 QUANTITY 2 13.1 DI2 JUNCTION DOWNTUBE COVER 1 3 Nm 5 13.2 MECHANICAL DOWNTUBE BLIND COVER 1 8 Nm BOLT M3x12 2

3 4 Nm ORCA OMX SEATPOST CLAMP

11.6 14 KIT Nº: Y0000172 QUANTITY ORCA OMX SEATPOST CLAMP 1

12 3 4 Nm 11.1 RUBBER SEAL SEATPOST ORCA OMX

11.3 15 ART Nº: 11160008 QUANTITY RUBBER SEAL SEATPOST ORCA OMX 1 11.5

11.2 11.7 11.1 11.4 DI2 BATTERY HOLDER ORCA OMX 16 KIT Nº: Y0000172 QUANTITY ORCA OMX FRAME STOP/CABLEGUIDE KIT MECH/DI2/ETAP DI2 BATTERY HOLDER ORCA OMX 1 11 KIT Nº: Y0000160 QUANTITY 11.1 BLIND GROMMET MEC/Di2/eTAP 3 ORCA OMX SEATPOST (WITHOUT SADDLE CLAMP ASSEMBLY) 11.2 MECH. FRONT DERAILLEUR GROMMET 1 17 KIT Nº: Y0000163 QUANTITY 11.3 DI2 FRONT DERAILLEUR GROMMET 1 ORCA OMX SEATPOST 350mm 1 11.4 REAR DER. CABLE STOP MECHANICAL 1 OMX SEATPOST BARREL NUT 1 11.5 REAR DER. DI2 GROMMET 1 OMX SEATPOST TILT BOLT 1 11.6 REAR BRAKE CLIP 1 OMX SEATPOST TILT NUT 2 11.7 BB CLIP CABLE GUIDE 1 *Saddle tilt assembly pre-assembled with orca omx seatpost. 16 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 17

SEATPOST ASSEMBLY AND HARDWARE ORCA OMX SEATPOST

19.1 17.4

17.2 18.2 19.2

17.3 Oval rails assembly 7x9 Oval rails assembly Ø7 18.2 19.2 18.1 19.1 ORCA OMX SEATPOST (WITHOUT SADDLE CLAMP ASSEMBLY) 18.1 17 KIT Nº: Y0000163 QUANTITY 17.4 17.1 ORCA OMX SEATPOST 350mm 1 17.2 1 18.3 OMX SEATPOST BARREL NUT 18.1 17.3 OMX SEATPOST TILT BOLT 1 19.3 19.1 17.4 OMX SEATPOST TILT NUT 2 18.1 *Saddle tilt assembly pre-assembled with orca omx seatpost. 19.1 17.1

5 8 Nm ROUND RAILS SADDLE CLAMP ASSEMBLY (7MM) 18 KIT Nº: Y0000164 QUANTITY 18.1 ROUND RAILS SADDLE CLAMP ASSEMBLY. 7mm 1 18.2 BUSHING 2 18.3 BOLT M6x53 1

OVAL RAILS SADDLE CLAMP ASSEMBLY (7X9) 19 KIT Nº: Y0000165 QUANTITY 19.1 OVAL RAILS SADDLE CLAMP ASSEMBLY. (7x9) 1 19.2 BUSHING 2 19.3 BOLT M6x53 1 18 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 19

SEATPOST SEATPOST SADDLE SETBACK SADDLE´S TILT ADJUSTMENT

Orca OMX seatpost saddle clamp can be used in two posi- Orca OMX seatpost allows to adjust the saddle´s tilt angle tions (0mm and 25mm setback). from 63º to 93º. The adjustment range depends on the saddle characteristics (angle between the saddle´s rails and the saddle´s surface) and the seat tube angle depending on the frame´s size.

63º - 93º

ORCA OMX 47 ORCA OMX 49 ORCA OMX 51 ORCA OMX 53 SADDLE ST=74,5º ST=74º ST=73,7º ST=73,5º Rail Nose Nose Nose Nose Nose Up Nose Up Nose Up Nose Up Angle Down Down Down Down Neutral Saddle 0 18,5 -11,5 19 -11 19,3 -10,7 19,5 -10,5

Medium Rail 5 13,5 -16,5 14 -16 14,3 -15,7 14,5 -15,5 Setback 0mm Setback 25mm Angle Note: Saddle clamp bolt´s head on the left. Note: Saddle clamp bolt´s head on the right. Extreme Rail Angle 7 11,5 -18,5 12 -18 12,3 -17,7 12,5 -17,5

ORCA OMX 55 ORCA OMX 57 ORCA OMX 60 SADDLE ST=73,5º ST=73,2º ST=73,2º Rail Nose Nose Nose Nose Up Nose Up Nose Up Angle Down Down Down Neutral Saddle 0 19,5 -10,5 19,8 -10,2 19,8 -10,2 Medium Rail Angle 5 14,5 -15,5 14,8 -15,2 14,8 -15,2 Extreme Rail Angle 7 12,5 -17,5 12,8 -17,2 12,8 -17,2 20 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 21

ICR01 STEM SPECIFICATIONS

STEERER Ø 1" 1/8

HANDLEBAR Ø 31,8 mm

FRAME

- Headtube external max.Ø 58 mm + Upper bearing external race max.Ø 52 mm 5 3 INTERNAL CABLING Up to 2 brake hoses and 2 gear cable outers

Internal cabling into stem with internal cabling handle- SHIMANO Di2 bars

COMPUTER BRACKET MAX. COMPUTER SIZE GARMIN 1030

AVAILABLE LENGHTS 80, 90, 100, 110, 120, 130

ANGLE -8º 1. Loosen the M6x53 bolt 2. Turn the adjustment nut clockwise to bring the saddle´s nose up (+10º) and counter-clockwise to bring it down (-10º)

+10°

-10°

5 8 Nm

TILT -8º

3. Tighten the M6x53 bolt to the recommended torque setting. 22 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 23

ICR01 STEM HARDWARE AND ASSEMBLY

ICR01 STEM HEADSET SPACERS KIT 24.1 20 KIT Nº: Y0000167 QUANTITY 20.1 ICR01 10mm SPACER 2

24.2 20.2 ICR01 5mm SPACER 2

24.3 ICR01 STEM ANGLE SPACER

24.3 21 ART Nº: 11140119 QUANTITY

24.3 ICR01 STEM ANGLE SPACER 1

COMPUTER BRACKET KIT STEM ICR01/R01 4 6 Nm 22 KIT Nº: Y0000168 QUANTITY 24.6 CAMERA BRACKET 1 1 21 GARMIN/WAHOO ADAPTER COMPUTER BRACKET 1 23.1 23.6 4 6 Nm BOLT M3x10 2 2 24.3 2 Nm 22 20.1 ICR01 STEM LOWER COVER 80MM Garmin 23.1 KIT Nº: Y0000182 QUANTITY 20.2 ICR01 STEM LOWER COVER 80mm 1 BOLT M3x10 2 Wahoo ICR01 STEM LOWER COVER 90MM 23.2 KIT Nº: Y0000183 QUANTITY ICR01 STEM LOWER COVER 90mm 1 BOLT M3x10 2

ICR01 STEM LOWER COVER 100MM 23.3 KIT Nº: Y0000184 QUANTITY ICR01 STEM LOWER COVER 100mm 1 BOLT M3x10 2 24 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 25

POTENCIA ICR01 CABLING PIECERÍO Y MONTAJE MECHANICAL GROUPSETS FRONT AND REAR DERAILLEUR CABLING ICR01 STEM LOWER COVER 110MM 23.4 KIT Nº: Y0000185 QUANTITY ICR01 STEM LOWER COVER 110mm 1 BOLT M3x10 2

ICR01 STEM LOWER COVER 120MM 23.5 KIT Nº: Y0000186 QUANTITY ICR01 STEM LOWER COVER 120mm 1 BOLT M3x10 2

ICR01 STEM LOWER COVER 130MM 23.6 KIT Nº: Y0000187 QUANTITY ICR01 STEM LOWER COVER 130mm 1 BOLT M3x10 2

The ICR01 stem is available in lenghts from 80mm to 130mm in 10mm increments The stem lower cover is specific for each lenght.

ICR01 STEM HARDARE KIT 24 KIT Nº: Y0000169 QUANTITY 24.1 BOLT M6x40 TOP CAP 1 24.2 TOP CAP 1 24.3 BOLT M5x15 DIREC. AND FACEPLATE 6 24.4 FACEPLATE 1 BOLT M3x10 2 24.6 LOGO ORBEA FACEPLATE 1 26 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 27

CABLING CABLING BRAKE HOSES ROUTING ROUTING THROUGH THE HEADSET-FRAME CAP AND THE UPPER BEARING ADAPTER

Left brake Front derailleur or Di2 cable Rear derailleur or Di2 cable Right brake 28 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 29

CABLING HEADSET SPACERS/CUTTING SHIMANO DI2 ELECTRONIC GROUPSETS CABLING THE STEERER TUBE

Internal cabling on OC Components handlebars OC1 Alloy, Due to the front brake hose being internally routed throu- When cutting, be careful not to damage any components OC2 Alloy, OC2 Carbon, OC1 AllRoad Alloy gh the fork´s blade and steerer tube, removing the fork on or cables. Orca OMX requires to disconnect the front brake caliper hose. The installation or removal of headset spacers does not require to remove any cables. They are composed of two However, it is not necessary to disconnect the front caliper halves that allow for easy installation without interfering to cut the fork´s steerer tube to the desired height. with the cabling. Simply disassemble the ICR01 stem from the steerer tube and remove the headset spacers (these can be split in two When installing headset spacers (40mm maximum), make halves to allow you to remove them without interfering sure that the steerer tube is long enough to allow for a co- with the cabling). rrect and safe installation of the stem and that the cables are long enough. SM-JC41 With the fork completely inserted into the headtube and (Inside the stem) the bike positioned so the fork is horizontally positioned IMPORTANT: Never install headset spacers above the to avoid debris from falling into the headset, use a steerer stem. The steerer tube lenght must be set so no spa- EW-RS910 tube cutting guide and a carbon specific saw to cut the cers are needed above the stem. steerer to the desired height. Measure the final height of all components before cutting the steerer.

SM-JC41

To Shimano STI Di2 lever

Cable EW- SD50-800mm

EW-RS910

BT-DN110 Cable EW- SD50-800mm

SM-JC41 30 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 31

MAINTENANCE

Orbea products are carefully designed to be long-lasting, TEST RIDE Take a quick ride up and down the street to efficient and easy to maintain. The carbon and aluminum make sure your bike is shifting and braking properly. Lis- AFTER A CRASH OR IMPACT frames on the Orca OMX are extremely corrosion-resistant. ten for unusual noises. However, your Orbea bicycle needs regular maintenance Falling is part of riding and it’s impossible to avoid minor of its components in order to work properly and to ensure accidents. If you crash your Orca OMX, please make sure their longevity. you are okay and seek medical attention if necessary. If 4) BEARINGS you are not injured, you should check your bike before continuing: 1) KEEP YOUR ORCA OMX CLEAN Bearings are one element subject to wear and tear. They must be in good condition to ensure that the other parts 1) Inspect your frame and components for damage. Washing your bike with mild soap and water will keep you of the bicycle work correctly: on the wheels, the steering Do not ride your bike if any problems are detected. looking stylish and allow you to check the condition of the column and the bottom bracket. frame and components. Don’t use high water pressure and avoid spraying water into bearings or frame tubes. Citrus Regularly check to make sure that the bearings turn freely WHAT TO LOOK FOR degreasers are biodegradeable and do a great job of re- in their housing and there are no signs of lateral play. Bea- mo-ving dirty grease from gears and chain. rings that do not turn properly or that have any lateral play Inspect Frame and fork for evidence of cracking or ben- must be replaced immediately in order to prevent wear ding. If cracks are discovered, discontinue use imme- and tear to the parts of the frame. Very damp weather dia-tely. 2) KEEP YOUR ORCA OMX LUBED conditions can cause the bearings to wear out faster. Avoid washing your bicycle with pressurized water hoses. If you Check the drivetrain and spin the wheels to make sure Once your bike is clean, it’s a good time to put fresh lube have any questions, take your bicycle to an Orbea dealer components are operating correctly. If you discover on the chain. Use only enough to get inside the links and for correct diagnosis and maintenance. da-mage to your components, discontinue use immedia- wipe off any excess because it will attract dirt. Headset tely. and pivot bearings should be inspected every few months for smoothness and to ensure that the seals are intact and Even if you don’t find any damage, pay careful attention lube is clean. to the sound of your bike when you continue riding. Un- usual noises can be caused by cracks or other problems. A well-maintained bike will be quiet and free of creaks or 3) INSPECT YOUR ORCA OMX BEFO- squeaks. Investigate and locate the source of any new RE YOU RIDE noises. 2) Bring your bike to your Orbea dealer for profes- Do a quick check before every ride to make sure your bike sio-nal inspection. Some damage can only be detected is in excellent condition. It is very common to discover by disassembling the bike to check for cracks or other small issues at home that can become big problems on the signs of stress. trail. CHAIN Is the chain dirty, noisy or dry? Clean and lube your chain before riding. BRAKES Check your brakes to A crash or impact can put extraordinary stress on your make sure they are working correctly. Check for missing/ bike and components, causing them to fail or to fa-ti- loose caliper and rotor bolts. TIRES Look for damage to gue prematurely. Failure can happen suddenly with the sidewalls of your tires. Check and adjust tire pressu-re. no warning, causing loss of control, serious injury or WHEELS Spin the wheels and look for wobbles, check death. for loose or broken spokes. Check quick release levers to make sure they are functioning properly. FRONT END Stand over the saddle, pull on the brakes and rock the bike back and forth. Feel for any play or knocking that might indicate a loose headset, loose brake rotors or calipers, or worn fork bushings. 32 | ORBEA TECHNICAL MANUAL BLUE PAPER ORCA OMX 2020 ORBEA | 33

ORBEA WARRANTY ADDITIONAL INFORMATION

The constant effort we make every day to produce the See the full description of the coverage and the Lifetime ORBEA participates actively on facebook and Twitter with highest quality bicycles enables us to offer the following Warranty conditions at: WARRANTY CLAIM PROCESS our fantastic global community of riders. Looking to find warranty and coverage conditions: https://www.orbea.com/int-en/warranty-benefits/ spots to ride or plan a vacation? Someone will have the All warranty claim processes must be processed through answers: an Orbea dealer, who will provide the company with the LEGAL WARRANTY REGISTER YOUR BICYCLE necessary documentation for the diagnosis of said claim. The dealer will inform the customer of the decision made by Orbea. FACEBOOK Orbea guarantees its products by law for a period of 2 In order to benefit from the extension of the Orbea Life- www.facebook.com/OrbeaBicycles years or whatever has been stipulated as the legal warran- ti-me Warranty, register your bike within the first 30 days ty period in the country where the purchase was made, to of having purchased it at www.orbea.com the original owner of the bicycle/component. TWITTER 01. REGISTER YOUR ACCOUNT www.twitter.com/Orbea/ This warranty covers Orbea products against manufac- tu-ring defects and/or lack of conformity and guarantees the repair or replacement of the defective product at no YOUTUBE cost to the affected customer. Likewise, this warranty also Visit our Orbea Channel on You Tube for a variety of helpful co-vers paint, varnish and corrosion defects on all frames 02. REGISTRATION NUMBER setup and tech videos: and rigid forks assembled on our bicycles during the pe- www.youtube.com/user/OrbeaBicycles riod specified in the first paragraph of this warranty.

This warranty does not cover in any case damage derived INSTAGRAM www.instagram.com/orbeabicycles from misuse or the lack of maintenance, or from the nor- mal wear and tear of perishable parts, such as, but not limited to: seals, bearings, handlebar tape, spokes, hub, ORBEA CONTENT threads, tires, seat, etc. View and download photos, videos and documents. content.orbea.com/us-en/ See the full description of the coverage and the legal warranty conditions at: https://www.orbea.com/int-en/warranty-benefits/ 03. WHERE TO FIND YOUR NUMBER BLOG ORBEA www.orbea.com/es-es/blog/ ORBEA LIFETIME WARRANTY 2 YOUR ORBEA DEALER As a complement to the legal warranty, Orbea offers the Our dealers are experts and should be able to assist you original buyer of the bicycle, under the condition of ha- with setting up and maintaining your Orbea bicycle. A ving registered their bicycle on the Orbea website within a com-plete listing of Orbea dealers and distributors can be period of 30 days following its purchase, the Orbea Li-fe- located on our website: time Warranty, which covers the frames and rigid forks 1 3 www.orbea.com/us-en/dealers/?country=INT we assemble on our bicycles, with no time limit, against manufacturing defects. SUPPORT This warranty extends the original period of coverage For technical questions about Orbea products, write to: 1 2 3 against pain, varnish or corrosion defects on our frames [email protected] and rigid forks for one additional year after the end of the legal warranty period. For any other question: [email protected] WWW.ORBEA.COM