Frame Fit 2017 Road Specifications

GEN.0000000005175 Rev C 2017 SRAM, LLC Table of Contents Electronic Shifters SRAM RED® eTap® BlipBox™ SRAM RED eTap Blips SRAM RED eTap BlipClamp™ and BlipGrip Wireless Dimensions...... 3 Remote Shift Buttons and Connector Remote Shifter Mounting...... 8 SRAM RED eTap BlipBox Dimensions...... 6 SRAM RED eTap Clics™ Wireless Shifter with Connectors...... 4 SRAM RED eTap BlipBox and Blips Extension Shift Buttons...... 9 SRAM RED eTap BlipBox Internal Mounting Specifications...... 7 SRAM RED eTap Shift/Brake Levers Mounting Specifications...... 5 Remote Shifter Connections...... 10 Electronic Front SRAM RED eTap SRAM RED eTap SRAM RED eTap Front Derailleur Dimensions...... 12 Front Derailleur Cage Alignment...... 14 Front Derailleur Clearance...... 16 SRAM RED eTap SRAM RED eTap SRAM RED eTap Frame Compatiblity Including Chainstay Front Derailleur Position with Clamp Braze-on Hanger Dimensions...... 17 Information...... 13 Adapter...... 15

2x11 Front SRAM RED/ SRAM Force/ SRAM Rival/ SRAM RED/ SRAM Force/ SRAM Rival/ SRAM RED/ SRAM Force/ SRAM Rival/ S-390 S-390 S-390 Frame Compatiblity Including Chainstay Front Derailleur Position with Clamp Braze-on Hanger Dimensions...... 23 Information...... 19 Adapter...... 21 SRAM RED/ SRAM Force/ SRAM Rival/ SRAM RED/ SRAM Force/ SRAM Rival/ S-390 S-390 Front Derailleur Cage Alignment...... 20 Front Derailleur Clearance...... 22

2x10™ Front Derailleurs SRAM Apex® SRAM Apex SRAM Apex Frame Compatiblity Including Chainstay Front Derailleur Position with Clamp Braze-on Hanger Dimensions...... 29 Information...... 25 Adapter...... 27 SRAM Apex SRAM Apex Front Derailleur Cage Alignment...... 26 Front Derailleur Clearance...... 28

2 135 mm OLD Compatibility Information on 2x11 Wide Axle Cranksets for 2x11 Wide Axle Cranks for 135 OLD SRAM Rival®/S552 Wide Axle 135 OLD ...... 30 Compatibility Crankset Frame Clearance Information.32 Front Derailleur Position with Clamp Adapter S902/S952 Wide Axle and Braze-on...... 31 Crankset Frame Clearance Information.33

Chainstay Clearance Chainstay Clearance - 1x11 & 2x11 ...... 35 Rear Derailleurs 2x11 SRAM RED®/ SRAM Force®/ SRAM Rival 1x11 SRAM Force 1 / SRAM Rival 1 / SRAM 2x10™ SRAM Apex ...... 37 Apex® 1 ...... 39 ...... 38 2x11 Cranksets SRAM RED SRAM Rival/ Quarq Prime Aluminum Power Quarq DZero Platform Power Meters Crankset Frame Clearance...... 41 Ready/ S-552 Power Meter Spider Frame Clearance...45 SRAM Force/SRAM RED Quarq® Power Crankset Frame Clearance...... 43 Meters/ Quarq Prime Carbon Power Ready/ S-390 S902/S952 Crankset Frame Clearance...... 44 Crankset Frame Clearance...... 42

1X™ Cranksets SRAM Force 1 SRAM Apex 1 Crankset Frame Clearance...... 47 Crankset Frame Clearance...... 49 SRAM Rival 1 S350-1 Crankset Frame Clearance...... 48 Crankset Frame Clearance...... 50

3 2x10™and 1x1 Cranksets SRAM Rival® OCT™ with PowerGlide™ S500/S550 with PowerGlide Chainrings ISOFLOW® with PowerGlide™ Chainrings Chainrings Crankset Frame Clearance...... 55 Crankset Frame Clearance...... 58 Crankset Frame Clearance...... 52 SRAM Apex®/ELITA®/S300/S350 with OMNIUM® S901/S951 Yaw™ Compatible PowerGlide Chainrings Crankset Frame Clearance...... 59 Crankset Frame Clearance...... 53 Crankset Frame Clearance...... 56 S900/S950 with PowerGlide Chainrings Touro/S100/S150 with PowerGlide Chainrings Crankset Frame Clearance...... 54 Crankset Frame Clearance...... 57 Bottom Brackets PressFit™ GXP® PressFit 30 GXP English/ GXP Italian/ Power Spline 86.5 mm Road Symmetric Shell BB Shell Specification...... 63 BB Shell Specifications...... 65 Specifications...... 61 PressFit 30 BB30...... 66 PressFit 30™ Road BB Shell Specification...... 64 ...... 62 Brakes SRAM RED® eTap® HRD/ SRAM RED® HRD/ SRAM RED eTap HRD/ SRAM RED HRD/ SRAM RED eTap/ SRAM RED/ SRAM Force/ SRAM Force® HRD/ SRAM Rival® HRD/ SRAM Force HRD/ SRAM Rival HRD/ SRAM Rival/ SRAM Apex/ S-700/ S-500 SRAM Apex® HRD/ S-700 HRD SRAM Apex HRD/ S-700 HRD/BB7™/ BB5™ Rim Brake Caliper Design Dimensions... 79 Road Hydraulic Disc Brake Safety Guidelines Rotor Dimensions...... 73 SRAM RED eTap/ SRAM RED/ SRAM Force/ for Rotor Size and Brake Pad Material....68 SRAM RED eTap HRD/ SRAM RED HRD/ SRAM Rival/SRAM Apex/ S-700/ S-500 SRAM RED HRD/ SRAM Force HRD/ SRAM Force HRD/ SRAM Rival HRD/ Rim Brake Caliper Design Dimensions...80 SRAM Rival HRD/ SRAM Apex HRD/ SRAM Apex HRD S-990/S-900/S-500 S-700 HRD Flat Mount Caliper Fork Spec...... 74-76 Aero Brake Lever Bar Guidelines...... 81 Disc Brake Hose Length Specification...69 SRAM RED eTap HRD/ SRAM RED HRD/ SINGLE DIGIT® SRAM RED eTap HRD SRAM Force HRD/SRAM Rival HRD/ Cable Link/Noodle/Boot...... 82-83 Disc Brake Hose Length Measurement. 70 SRAM Apex HRD/ S-700 HRD/ BB7/ BB5 Clearance...... 77 Shorty™ Ultimate SRAM RED eTap HRD/ SRAM RED HRD/ Dual Mounted Brake Caliper...... 84 SRAM Force HRD/SRAM Rival HRD/ SRAM BB7/ BB5 Road Apex HRD/ S-700 HRD Mechanical Disc Brake Clearance...... 78 Shorty 6/ Shorty 4 Post Mount Frame/Fork Spec...... 71-72 Cable Carrier & Straddle Cable Length...85 Mechanical Brake Compatibility ...... 86

4 Wheels and Hubs Zipp® Wheels Zipp Hubs with Center Locking Disc Brake Maxle™ Description Decoder ...... 98 Rim/Disc Design Parameters...... 88 Mount Maxle Ultimate Driver and Wheel Standard- Road Front and Rear Hub Distance to Rotor....93 Frame / Fork Clearance...... 99 Continued...... 89-90 Zipp Hubs with ISO 6 Bolt Disc Brake Mount Maxle Stealth™ Zipp® Hubs with Center Locking Disc Brake Front Hub Specifications...... 94 ...... 100 Mount Zipp Hubs with ISO 6 Bolt Disc Brake Mount Maxle Lite™ & Maxle Front Hub Specifications...... 91 Rear Hub Specifications...... 95 Frame / Fork Clearance ...... 101 Zipp Hubs with Center Locking Disc Brake Zipp Rim Brake Hubs Maxle, Maxle Lite, Maxle Ultimate, Maxle Mount Front Hub Specifications...... 96 Stealth Rear Hub Specifications...... 92 Zipp Rim Brake Hubs Rear Frame Specification...... 102 Rear Hub Specifications...... 97

5 General Notes All dimensions are in millimeters unless otherwise noted. Images in this document are not to scale. Your product's appearance may vary slightly from the images in this document. Information in this document is subject to change without prior notice. If you have any questions please contact your SRAM representative. Electronic Shifters

2 SRAM RED® eTap® BlipBox™ Wireless Shifter Dimensions

18 mm 40.6 mm

61.5 mm

1 Front (Button side) Side Back (Battery/Mount)

NOTES 1 Button access needed for pairing and adjustment of the derailleurs.

3 SRAM RED® eTap® BlipBox™ Wireless Shifter with Connectors

18 mm

1 72 mm

2

NOTES 1 Allow sufficient space for shifter, connector length, and wire minimum bend radius in desired mounting location. 2 Wire miniumum bend radius is 10 mm.

4 SRAM RED® eTap® BlipBox™ Mounting Specifications

1 4 90° Lock mount

Threaded direct mount M4x0.7 thread pitch, 4.6 mm depth NOTES 1 Consider additional clearance for 90° lock mount. 2 Cable connections can be made after mounting with proper port access. 3 Button access is only needed for setup. 4 90° mount is compatible with all SRAM/Zipp Quickview mounts. 5 BlipBox must be mounted externally on the bike to maintain integrity of the wireless signal. For internal mounting specifications, see page 7.

5 SRAM RED® eTap® Blips Remote Shift Buttons and Connector Dimensions

Left shift button Right shift button

1 2 Wire lengths 150 mm 230 mm 2.5 mm wire diameter 450 mm 650 mm

31.35 mm 1 5.0 mm connector diameter

NOTES 1 Consider the connector diameter and wire length when routing wires internally. 2 Choose the wire lengths based on application and desired location of the Blips.

6 SRAM RED® eTap® BlipBox™ and Blips Internal Mounting Specifications

Side A Side B

100 mm 100 mm 1 2 NOTES 1 Internally mounted shifter setup requires the Blip wires to be routed external of bar, , and frame materials a minimum of 100 mm per side. 2 Routing under bar tape is acceptable within the 100 mm length.

7 SRAM RED® eTap® BlipClamp™ and BlipGrip™ Remote Shifter Mounting

31.8 mm bar 22.2mm TT Extensions

1

22.2-35 mm bar

2

NOTES 1 Button holder designed for 31.8 mm bar mounting. 2 Direct mount under the handlebar tape for 22.2 mm through 35 mm diameter bars.

8 SRAM RED® eTap® Clics™ Extension Shift Buttons

18.8 mm

Fits 19 mm to 20 mm bore diameter

Wire lengths 500 mm 650 mm

Outer diameter 22.2mm for standard round extension

9 SRAM RED® eTap® Shift/Brake Levers Remote Shifter Connections

2

NOTES 1 The left and right shifter brake each provide two additional ports for auxiliary remote shifter buttons. 2 Use plugs when remote shifters are not in use. 3 Provide a small amount of slack in the wire for shifter brake repositioning. 4 Route the wires underneath the bar tape.

10 Electronic Front Derailleur

11 SRAM RED® eTap® Front Derailleur Dimensions

Hanger contact face

57 14

8.4

46

22.9 Fixation bolt center

40

41

12 SRAM RED® eTap® Frame Compatiblity Including Chainstay Information

Fixation Bolt Position Chainstay Angle* Minimum Chainstay Length C (mm) Chainring (mm) 130 OLD frames A (mm) B (°) 135 OLD frames 135 OLD frames w/ Wide Axle Cranks

55/42 151 ≥ 395 ≥ 430 53/39 147

2x11 52/36 145 61-66° ≥ 410 45 ≥ 405 50/34 141 ≥ 405

46/36 133 ≥ 410

*For 32T cassettes the chainstay angle (B) is 63-66°

Potential problems with not following the minimum chainstay length

B WARNING CRASH HAZARD WARNING CRASH HAZARD When the chain is on the small chainring and smallest When the chain is on the big chainring and smallest rear cog, rear cog, reduced clearance between the chain and large increased chain angle, increased chain angle can cause the chainring upshift rivets can cause the chain to unintentionally chain to derail outboard off of the large chainring under very catch on the upshift rivets, which may lead to loss of control high pedaling loads, which may lead to a crash and serious of the . injury and/or death to the rider. A

C

13 SRAM RED® eTap® Front Derailleur Cage Alignment

Hanger Offset from Seat Tube Axis Hanger Angle Relative to Seat Tube Axis Outer Cage Position Above Chainring Chainring D (mm) E (°) F (mm) G (mm)

55/42

53/39

2x11 52/36 8.7 ± 0.5 ± 1.5° > 0 1.75 ± 0.5

50/34

46/36

D E

G

F

14 SRAM RED® eTap® Front Derailleur Position with Clamp Adapter

Lower Clamp Position Upper Clamp Position Chainring H (mm) I (mm)

55/42 136 157

53/39 132 153

2x11 52/36 130 151

50/34 126 147

46/36 118 139

I

H

BB Axis

15 SRAM RED® eTap® Front Derailleur Clearance

Clearance Between Front Derailleur and Frame

A (mm) B (mm) C (mm) D E F

25 5-5.5 5.75 16 29 21.2

Clearance Between Front Derailleur and Crank Arm

G (mm) H (mm)

34 90.4

A A G

B Fixation bolt center

A 27

Bottom bracket 7.55 center 8.7 Ø34.9 14 Fixation bolt center

F E

57 C

D

H

Tire clearance to battery 20.1

D

16 SRAM RED® eTap® Braze-on Hanger Dimensions

R7.6

11.3

R5 0±0.5 mm Center line of seat tube to center line of 8.7

90°

34

25

17 2x11 Front Derailleurs

18 SRAM RED®/ SRAM Force®/ SRAM Rival®/ S-390 Frame Compatiblity Including Chainstay Information

Fixation Bolt Position Chainstay Angle* Minimum Chainstay Length C (mm) Chainring Cable Routing Chainline (mm) 130 OLD frames or A (mm) B (°) 135 OLD frames 135 OLD frames w/ Wide Axle Cranks

55/42 151 ≥ 395 ≥ 430 53/39 147 45

52/36 145 ≥ 410 2x11 Bottom pull 61-66° 50/34 141 ≥ 405 ≥ 405 45 (S-390 is 47)

46/36 ≥ 410 45 133 46/34 ≥ 405 47

*For 32T cassettes the chainstay angle (B) is 63-66° Potential problems with not following the minimum chainstay length

B WARNING CRASH HAZARD WARNING CRASH HAZARD When the chain is on the small chainring and smallest When the chain is on the big chainring and smallest rear cog, rear cog, reduced clearance between the chain and large increased chain angle, increased chain angle can cause the chainring upshift rivets can cause the chain to unintentionally chain to derail outboard off of the large chainring under very catch on the upshift rivets, which may lead to loss of control high pedaling loads, which may lead to a crash and serious of the bicycle. injury and/or death to the rider. A

C

19 SRAM RED®/ SRAM Force®/ SRAM Rival®/ S-390 Front Derailleur Cage Alignment

Hanger Offset from Seat Tube Axis Hanger Angle Relative to Seat Tube Axis Outer Cage Position Above Chainring Chainring D (mm) E (°) F (mm) G (mm)

55/42

53/39

52/36 2x11 8.7 ± 0.5 ± 1.5° > 0 1.75 ± 0.5 50/34

46/36

46/34

E

D

G

F

20 SRAM RED®/ SRAM Force®/ SRAM Rival®/ S-390 Front Derailleur Position with Clamp Adapter

Lower Clamp Position Upper Clamp Position Chainring H (mm) I (mm)

55/42 136 157

53/39 132 153

52/36 130 151 2x11 50/34 126 147

46/36 118 139 46/34

I

H

BB Axis

21 SRAM RED®/ SRAM Force®/ SRAM Rival®/ S-390 Front Derailleur Clearance

Clearance Between Front Derailleur and Frame

A (mm) B (mm) C (mm) D E F

25 5-5.5 5.75 16 29 21.2

Clearance Between Front Derailleur and Crank Arm

G (mm) H (mm)

34 90.4

A A A B B G

Bottom bracket center Fixation Bolt Center

C F E

H

D

D

22 SRAM RED®/ SRAM Force®/ SRAM Rival®/ S-390 Braze-on Hanger Dimensions

R7.6

11.3

R5 0±0.5 mm Centerline of seat tube to centerline of bottom bracket 8.7

90°

34

25

23 2x10™ Front Derailleurs

24 Sub-SectionSRAM Apex® Title - Shift+Ctrl Click to unlock and edit text SupplementalFrame Compatiblity Text Including Chainstay Information

Fixation Bolt Position Chainstay Angle* Chainstay Length C (mm) Chainring Cable Routing Chainline (mm) A (mm) B (°) 130 OLD 135 OLD

55/42 154 (lower hole) ≥395 54/42 152 (lower hole)

53/39 150 (lower hole)

2x10™ 52/36 Bottom pull 148 (lower hole) 61-66° ≥430 46

52/38 148 (lower hole) ≥405

50/34 152 (upper hole)

46/36 144 (upper hole) *For 32T cassettes the chainstay angle (B) is 63-66°

Potential problems with not following the minimum chainstay length

B WARNING CRASH HAZARD WARNING CRASH HAZARD When the chain is on the small chainring and smallest When the chain is on the big chainring and smallest rear cog, rear cog, reduced clearance between the chain and large increased chain angle, increased chain angle can cause the chainring upshift rivets can cause the chain to unintentionally chain to derail outboard off of the large chainring under very catch on the upshift rivets, which may lead to loss of control high pedaling loads, which may lead to a crash and serious of the bicycle. injury and/or death to the rider. A

C

25 Sub-SectionSRAM Apex® Title - Shift+Ctrl Click to unlock and edit text SupplementalFront Derailleur Text Cage Alignment

Hanger Offset from Seat Tube Axis Hanger Angle Relative to Seat Tube Axis Outer Cage Position Above Chainring Chainring D (mm) E (°) F (mm) G (mm)

55/42

54/42

53/39

2x10™ 52/36 8.7 ± 0.5 ± 1.5° > 0 1.75 ± 0.5

52/38

50/34

46/36

E

D

G

F

26 SRAM Apex® Front Derailleur Position with Clamp Adapter

Lower Clamp Position Upper Clamp Position Chainring H (mm) I (mm)

55/42 149 166

54/42 147 164

53/39 145 162

2x10™ 52/36 143 160

52/38 143 160

50/34 139 156

46/36 131 148

I

H

BB Axis

27 SRAM Apex® Front Derailleur Clearance

Clearance Between Front Derailleur and Frame

A (mm) B (mm) C (mm) D E F

25 5 8.4 15.2 34.2 (upper hole) 27.7 (upper hole)

Clearance Between Front Derailleur and Crank Arm

G (mm) H (mm)

31 85.3

A A A B B G

Bottom bracket center Fixation Bolt Center

C F E

H

D

D

28 SRAM Apex® Braze-on Hanger Dimensions

R7.6

11.3

R5 0±0.5 mm Centerline of seat tube to centerline of bottom bracket 8.7

90°

34

25

29 135 mm OLD Compatibility Information on 2x11 Wide Axle Cranksets for 135 OLD

30 2x11 Wide Axle Cranks for 135 OLD Compatibility Front Derailleur Position with Clamp Adapter and Braze-on

Frame BB shell width Crankset Chainline (mm) FD placement (mm) Available clamp diam- Q-factor (mm)

Braze-on -- 73 mm SRAM® Wide Axle crankset 47.5 27.5 150 (or 68 mm plus spacers)* 31.8 Clamp adapter 34.9

*68 mm BB shells may be spaced to 73 mm by installing 2.5 mm BB cup spacers. GXP® uses the spacers behind the BB cup, and BB30® models use the spacer on the outside of the BB cup shields.

Standard Braze-on and Clamp Adapter 135 Braze-on 135 SRAM Clamp Adapter

68 mm 73 mm 73 mm

25 mm 27.5 mm 27.5 mm

NOTES 1 Frame BB shell width and rear hub OLD are measured in total width. 2 Chainline and FD placement are measured from the centerline of the bike. 3 Drawings not to scale.

31 SRAM Rival®/S552 Wide Axle Crankset Frame Clearance Information

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

52/36 75.0 106.8 63.8 63.8 47.0 61.0 192.1 41.0 42.9 50.6 62.8 (BB30) 62.6 (BB30) 2x11 50/34 71.0 103.1

Q-factor : 154.6 (GXP : PFGXP) 152.4 (BB30 : PF30) Bottom Bracket Type(s): GXP® : PFGXP™ : BB30™ : PF30™

L2 L1

W5 L3 W4 W3 W1 L4

L5

W6

32 S902/S952 Wide Axle Crankset Frame Clearance Information

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

55/42 87.0 113.1 57.0 71.0 50.0 53/39 81.8 109.2

52/36 75.0 107.0 197.0 40.5 42.5 62.5 62.5 2x11 50/34 47.0 61.0 71..0 103.2 50.5

46/36 75.0 95.1

Q-factor : 150 Bottom Bracket Type(s): GXP® : BB30™ : PF30™

L2 L1

W5 L3 W4 W3 W1 L4

L5

W6

33 Chainstay Clearance

34 Sub-SectionChainstay Clearance Title - Shift+Ctrl - 1x11 & Click2x11 to unlock and edit text Supplemental Text

7 mm Max. 2

To center of bottom bracket

NOTES 1 Chainstay should be designed for sufficient clearance to the chain when on the smallest cog to avoid contact between chain and chainstay when riding over a rough surface. 2 7 mm Max applies where the chain crosses the chainstay while in the smallest cog. 3 The chainstay length for all 1x road chainrings is ≥ 395 mm. For 2x chainstay length go the Front Derailleur section.

35 Rear Derailleurs

36 Sub-Section2x11 SRAM RED®/ Title -SRAM Shift+Ctrl Force®/ Click SRAM to unlock Rival® and edit text Supplemental Text

Rear Derailleur Hanger Specifications

L (mm) X (mm) A R1 (mm) R2 (mm) T (mm) D (mm)

24-28 7-10 30°-35° 8.5 (max) 11.5-12.5 7-8 11.0 ±1.5

Rear Derailleur Hanger

To center of bottom bracket

R2 L T T

T

R1 T 90° A

X D

37 Sub-Section1x11 SRAM Force® Title -1 Shift+Ctrl / SRAM Rival® Click 1to / SRAMunlock Apex®and edit 1 text Supplemental Text

Rear Derailleur Hanger Specifications

L (mm) X (mm) A R1 (mm) R2 (mm) T (mm) D (mm)

24-28 7-10 30°-35° 8.5 (max) 11.5-12.5 7-8 11.0 ±1.5

Rear Derailleur Hanger

To center of bottom bracket

R2 L T

T

R1 T 90° A

X D

38 2x10™ SRAM Apex®

Rear Derailleur Hanger Specifications

L (mm) X (mm) A R1 (mm) R2 (mm) T (mm) D (mm)

24-28 7-10 30°-35° 8.5 (max) 11.5-12.5 7-8 11.5 ±1.5

Rear Derailleur Hanger

To center of bottom bracket

R2 L T

T

R1 T 90° A

X D

39 2x11 Cranksets

40 SRAM RED® Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

55/42 88.0 113.1 38.0 57.0 71.0 47.5 53/39 81.8 109.2 37.7

52/36 75.0 107.0 197.0 40.0 60.0 min 60.0 min 2x11 50/34 47.0 61.0 71.0 103.2 38.0 48.0

46/36 75.0 95.1

Q-factor : 145 Bottom Bracket Type(s): GXP® : BB30™ : PF30™ : PFGXP™

1 Cranks can be configured to fit BB386™, BB30a, and BBRight™. 2 SRAM RED 22 and SRAM RED BB386 crank variants use the same crankset frame clearance dimensions as SRAM Force® on page 42.

L2 L1

W5 L3 W4 W3 W1 L4

L5

W6

41 SRAM Force®/SRAM RED® Quarq® Power Meters/ Quarq Prime Carbon Power Ready/S902/S952 Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

55/42 87.0 113.1 38.0 57.0 71.0 47.5 53/39 81.8 109.2 37.7

52/36 75.0 107.0 197.0 40.0 60.0 min 60.0 min 2x11 50/34 47.0 61.0 71.0 103.2 38.0 48.0

46/36 75.0 95.1

Q-factor : 145 Bottom Bracket Type(s): GXP® : BB30™ : PF30™ : PFGXP™

1 Cranksets can be configured to fit BB386™, BB30a, and BBRight™.

L2 L1

W5 L3 W4 W3 W1 L4

L5

W6

42 SRAM Rival®/ Quarq® Prime Aluminum Power Ready/ S-552 Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

52/36 75.0 106.8 61.3 (GXP: 61.3 (GXP: PFGXP) PFGXP) 50/34 47.0 61.0 71.0 103.1 192.1 38.5 40.4 48.1 60.3 (BB30 60.3 (BB30 2x11 46/36 75.0 95.1 : PF30) : PF30)

Q-factor : 149.6 (GXP : PFGXP) 147.4 (BB30 : PF30) Bottom Bracket Type(s): GXP® : BB30™ : PF30™ : PFGXP™

1 Cranksets can be configured to fit BB386™, BB30a, and BBRight™.

L2 L1

W5 L3 W4 W3 W1 L4

L5

W6

43 S-390 Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

50/34 103.1 57.3 61 71 191.5 40.4 42.4 50.1 62 62 2x11 46/34 95.1

Q-factor : 149 Bottom Bracket Type(s): GXP® : BB30™ : PF30™ : PFGXP™

L2 L1

W5 L3 W4 W3 W1 L4

L5

W6

44 Quarq® DZero Platform Power Meters Power Meter Spider Frame Clearance

Model L1 (mm) L2 (mm) L3 (mm) L4 (mm) W1 (mm) W2 (mm) W3 (mm) W4 (mm) W5 (mm)

DZERO 110 38.5 46.95 42.0 DZERO 130 24.0 27.0 39.0 56.95 47.6 46.7 44.4 41.0

DFOUR 38.5 46.95 41.9

1 Cranksets can be configured to fit BB386™, BB30a, and BBRight™.

L1

L2

L3 W1 W2 W3 W4 W5

L4

Centerline

NOTES 1 DZero Carbon, DFour, and RED DZero crankset frame clearance is the same as SRAM Force on page 42. 2 DZero Aluminum crankset frame clearance is the same as SRAM Rival on page 43.

45 1X™ Cranksets

46 SRAM Force® 1 Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W5 (mm) W6 (mm)

54 112.2 57.0 72.0 52 108.2

50 104.1

48 100.1

46 96.1 197.0 38.0 43.7 60.0 60.0 1x11 44 47.0 62.0 92.0

42 88.0

40 84.0

38 79.9

Q-factor : 145 Bottom Bracket Type(s): GXP® : BB30™ : PF30™ : PFGXP™ L2 1 Cranksets can be configured to fit BB386™, BB30a, and BBRight™. L1

W5 W3 W1 L4

L5

W6

47 Sub-SectionSRAM Rival® Title1 - Shift+Ctrl Click to unlock and edit text SupplementalCrankset Frame Text Clearance

Chainring L1 (mm) L2 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W5 (mm) W6 (mm)

50 104.1

48 100.1

46 96.1 61.3 (GXP: 61.3 (GXP: PFGXP) PFGXP) 44 47.0 62.7 92.0 192.1 38.0 43.7 60.3 (BB30 60.3 (BB30 1x11 42 88.0 : PF30) : PF30)

40 84.0

38 79.9

Q-factor : 149.6 (GXP : PFGXP) 147.4 (BB30: PF30) Bottom Bracket Type(s): GXP® : BB30™ : PF30™ : PFGXP™

L2 L1

W5 W3 W1 L4

L5

W6

48 Sub-SectionSRAM Apex® Title 1 - Shift+Ctrl Click to unlock and edit text SupplementalCrankset Frame Text Clearance

Chainring L1 (mm) L2 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W5 (mm) W6 (mm)

44 92.0

42 49.0 61.0 88.0 191.7 41.3 43.7 62.0 62.1 1X™ 40 83.9

Q-factor : 149 Bottom Bracket Type(s): GXP® : BB30™ : PF30™ : PFGXP™

L2 L1

W5 W3 W1 L4

L5

W6

49 S350-1 Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W5 (mm) W6 (mm)

44 92.0

42 88.0 47.0 62.7 196.7 38.0 43.7 60.0 60.0 1X™ 40 84.0

38 79.9

Q-factor : 145 Bottom Bracket Type(s): GXP® : BB30™ : PF30™ : PFGXP™

L2 L1

W5 W3 W1 L4

L5

W6

50 2x10™and 1x1 Cranksets

51 SRAM Rival® OCT™ with PowerGlide™ Chainrings Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

53/39 57.0 71.0 81.0 109.2

52/38 79.0 107.2 52/36 75.0 47.0 61.0 50/34 103.2 196.0 38.0 40.0 47.3 61.0 min 61.0 min 2x10™ 71.0 48/34 99.0

46/38 57.0 71.0 79.0 95.1 46/36 47.0 61.0 75.0

Q-factor : 147 Bottom Bracket Type(s): GXP® : PFGXP™

L2 L1

W5 W4 L3 W3 W1 L4

L5

W6

52 S901/S951 Yaw™ Compatible Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

55/42 TT 88.0 113.3 38.0 57.0 71.0 48.0 53/39 81.8 109.2 197.0 37.7 40.0 60.0 min 60.0 min 2x10™ 50/34 47.0 61.0 71.0 103.2 38.0 48.3

Q-factor : 145 Bottom Bracket Type(s): GXP® : BB30™ : PF30™ : PFGXP™

L2 L1

W5 W4 L3 W3 W1 L4

L5

W6

53 S900/S950 with PowerGlide™ Chainrings Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

55/42 TT 113.3 88.0 54/42 TT 57.0 71.0 111.3

53/39 81.0 109.2

52/38 79.0 107.2 52/36 75.0 197.0 38.0 40.0 47.3 60.0 min 60.0 min 2x10™ 47.0 61.0 50/34 103.2 71.0 48/34 99.0

46/38 57.0 71.0 79.0 95.1 46/36 47.0 61.0 75.0

Q-factor : 145 Bottom Bracket Type(s): GXP® : BB30™ : PF30™ : PFGXP™

L2 L1

W5 W4 L3 W3 W1 L4

L5

W6

54 S500/S550 with PowerGlide™ Chainrings Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

53/39 57.0 71.0 81.0 109.2

52/38 79.0 107.2 52/36 75.0 47.0 61.0 50/34 103.2 196.5 38.0 40.0 47.3 60.0 60.0 2x10™ 71.0 48/34 99.0

46/38 57.0 71.0 79.0 95.1 46/36 47.0 61.0 75.0

Q-factor : 145 Bottom Bracket Type(s): GXP® : BB30™ : PF30™ : PFGXP™

L2 L1

W5 W4 L3 W3 W1 L4

L5

W6

55 SRAM Apex®/ELITA®/S300/S350 with PowerGlide™ Chainrings Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

53/39 57.0 71.0 81.0 109.2

52/38 79.0 107.2 52/36 75.0 47.0 61.0 2x10™ 50/34 103.2 38.0 40.0 47.3 71.0 196.7 60.0 60.0 48/34 99.0

46/38 57.0 71.0 79.0 95.1 46/36 47.0 61.0 75.0

1x1 48 57.0 71.0 NA 99.0 38.5 40.5 NA

Q-factor : 145 Bottom Bracket Type(s): GXP® : BB30™ : PF30™ : PFGXP™

L2 L1

W5 W4 L3 W3 W1 L4

L5

W6

56 Touro/S100/S150 with PowerGlide™ Chainrings Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

53/39 57.0 71.0 81.0 109.2

52/38 79.0 107.2 52/36 75.0 2x10™ 47.8 50/34 61.0 103.2 47.0 71.0 190.5 38.5 40.5 61.0 59.0 48/34 99.0

46/36 75.0 95.1

1x1 48 NA 99.0 NA 71.0 1x G52 57.0 107.2 112.5 46.0

Q-factor : 145 Bottom Bracket Type(s): Power Spline

L2 L1

W5 W4 L3 W3 W1 L4

L5

W6

57 ISOFLOW® with PowerGlide™ Chainrings Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm)

2x10™ 50/34 47.0 71.0 103.2 47.8 71.0 191.8 38.5 40.5 61.0 59.0 1x G52 57.0 107.2 112.5 46.0

Q-factor : 145 Bottom Bracket Type(s): Power Spline

L2 L1

W5

W3 W1 L4

L5

W6

58 OMNIUM® Crankset Frame Clearance

Chainring L1 (mm) L2 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W5 (mm) W6 (mm)

48 64.5 78.0 99.1 195.4 35.5 42.5 55.0 54.7 1x1 Q-factor : 145 Bottom Bracket Type(s): GXP®

L2 L1

W5

W3 W1 L4

L5

W6

59 Bottom Brackets

60 PressFit™ GXP® 86.5 mm Road Symmetric Shell Specifications

A 86.5 ±0.5 PressFit GXP BB-Key Dimensions 43.25 ITEM NO. DESCRIPTION

1 WAVE WASHER

2 DS SHIELD Ø41 0 -0.05 4 3 NDS SHIELD 3 4 DS CUP

5 NDS CUP

I A -A- Frame Center

86.5 ±0.5 NOTES 16.05 3 1 GXP integreated adapter is only compatible (2X) with the bottom bracket shell specifications 5 4 2 shown. 1 2 Only dimensions essential to bottom bracket 3 press fit and function are shown. Dimensions apply after finish.

Ø44 3 Tolerance applies to depth of 14 mm from (2X) surface -A- each side.

Drive Side (DS) 4 Press fit surfaces should be unpainted.

Non-Drive Side (NDS) 5 180 kg is the maximum recommended frame press-in force.

Ø27.8 Ø34 9.75 PressFit 14.8 region (2x) 24.5

Road Symmetric 86.5 Bottom Bracket

61 PressFit 30™

SRAM® PressFit 30™ (PF30) bottom brackets have been designed and tested to work within the bounds of the dimensions and tolerances in the shell specifications and bottom bracket specifications. Materials, manufacturing methods, and frame shell designs can potentially influence the performance of the bottom bracket, even when the shell is manufactured to these specifications. In these instances, it is recommended that bicycle manufacturers confirm the bottom bracket system performance with individual frame configurations. Things that should be considered when evaluating the frame and bottom bracket interaction include, but are not limited to: • Loosening of the adapter cups from the bottom bracket shell (frame material choice can greatly affect friction coefficient). • Binding of bearings within the bottom bracket. For more information regarding PF30 bottom bracket technical information, contact your SRAM representative.

62 PressFit 30™ BB Shell Specification

W ±0.25 4

NDS DS ±0.5 13 MIN 13 MIN B 2X 1±0.5 X 45° -A-

+0.0 Ø46 -0.05 Ø44.5 MIN

B DS

NOTES 3 Frame Centerline 1 Dimensions apply after finishing. 2 Only dimensions essential to bottom bracket PressFit and function are shown. All other Dim W 4 Dim DS Dim NDS details are left to the discretion of the frame or PF30 68 68 34 component designer. Dimensions shown do not take the place of proper frame, bottom bracket PF30 79 ASYM 79 34 45 shell, or crankset design. PF30 86.5 86.5 43.25 3 PressFit surfaces should be unpainted. 4 Recommended 68 mm - 86 mm for road applications.

63 PressFit 30™ Road BB Shell Specification

W ± .20 See Detail Z Dim W Dim DS Dim NDS A 1.5 (2X) PF30 68 68 34 27 PF30 79 ASYM 79 34 45

PF30 86.5 86.5 43.25 47

B

46.01 Ø52 Ø44 Ø39 46.07 (2X) (2X) Drive Side (DS) Non-Drive Side (NDS)

B Detail Z : Crank bottom bracket interface scale 5 : 1 11.5 ± 0.2 PressFit region 0.04 (2x) (2x) 11.25 ± 0.2 PressFit BB Shell to 13.79 region (2x) BB shell shown for 14.65 reference Shield Outerface - DS A

NDS DS Frame Center Notes 1 Dimensions apply after finishing. 2 Only dimensions essential to bottom bracket PressFit and function are shown. All other details are left to the discretion of the frame Ø46.76 or crankset designer. Dimensions shown do not take the place of (2X) proper frame, bottom bracket shell, or crankset design. 3 Ensure that the bottom bracket cups are completely pressed into W+.08 to the frame shell. There should be no gap between the flange and Shield - Outerface - NDS the bottom bracket shell. Shield - Outerface - DS

64 GXP® English/ GXP Italian/ Power Spline BB Shell Specifications

Minimum usable threads Bottm bracket dimension A B C (mm) D (mm)

GXP English Power Spline 1.37" x 24 TPI R.H. Class 2A 1.37" x 24 TPI L.H. Class 2A 68 or 73 ±0.5* Square Taper 21

GXP Italian 36 mm x 24 TPI R.H. Class 2A 70 ±0.5 *2.5 mm spacers may be used between the frame-shell and the adapter cups to adjust BB spacing.

A B

C

Chamfer DO NOT EXCEED Ø 36.86 mm Drive Side (DS) Non-Drive Side (NDS)

D

65 BB30™

Information for the BB30 drawing and legal agreement can be found on www.BB30standard.com. Use of the information contained in the drawing is forbidden witThout reviewing and agreeing to the legal terms and conditions found on www.BB30standard.com. By using the information contained in the drawing you are certifying that you have agreed to the terms and conditions found within that legal agreement.

66 Brakes

67 SRAM RED® eTap® HRD/ SRAM RED® HRD/ SRAM Force® HRD/ SRAM Rival® HRD/ SRAM Apex® HRD/ S-700 HRD Road Hydraulic Disc Brake Safety Guidelines for Rotor Size and Brake Pad Material

Chainring Brake pad material Minimum rotor size (mm)

Road Riding Organic 160 Riding Type Cyclocross Racing Organic or Metal Sintered 140

⚠WARNING - CRASH HAZARD SRAM disc brakes pass laboratory testing designed to simulate worst case riding conditions. The rotor size and pad compound materials recommendations were generated through controlled testing. Use of any combination not mentioned above will void the warranty and could result in a crash.

68 SRAM RED® HRD/ SRAM Force® HRD/ SRAM Rival® HRD/ SRAM Apex® HRD/ S-700 HRD Disc Brake Hose Length Specification

NOTES Stealth-a-majig Connect-a-majig 1 Connectamajig™ quick disconnect for initial assembly only. See Connectamajig Attach to 5 6 Attach to caliper caliper here here specification for dimensions and details. Ø5.1 max Ø6.8 2 Caliper Connectamajig is located here. The hose fitting feeds through the frame from front to back. Specify caliper hose exit angle ±10 mm per hose angle specification. Hose length Attach to side of hood, under ±10 mm 3 Hose inline Connectamajig is located here. hood cover Hose length The hose fitting feeds through the frame Banjo connection from back to front. under reservoir cover 4 Measure hose length from the hood attachment to the caliper fitting. The hood bolt 4 Hose length starts approximately 20 mm from the end of 4 20 mm the hose, as shown. 5 For internal routing, the SJ (Stealth-a-majig) connection requires a hole in the frame or fork that is at least 5.1 mm, the size of the brake hose diameter. 6 For internal routing, the CJ (Connect-a-majig) connection requires a hole in the frame or fork 3 Inline CJ located here that is at least 7 mm. The necessary hole size depends on the angle required for passing the hose through the frame. 7 Hose bend radius at 20° C = 30 mm minimum; Hose diameter Ø 5.1 maximum. 8 Brake system is not compatible with mineral based fluids such as damping fluid, mineral oil, fork fluid, or RockShox® Reverb™ fluid.

2 Caliper CJ located here

69 SRAM RED® eTap® HRD Disc Brake Hose Length Measurement

1

1 1

NOTES 1 Measure the hose length from the caliper fitting to the hood fitting. 2 The hose bend radius at 20°C=30 mm minimum. Internal routing holes should not be less than Ø5.1 mm. 3 Caliper location and orientation as shown for reference only; see frame-mount user specification for defining criteria. 4 Brake system and brake system Connectamajig are not compatible with mineral based fluids such as damping oil, mineral oil, fork oil, or RockShox® Reverb™ fluid. Use only DOT 4 or DOT 5.1 fluids with SRAM hyrdaulic brakes.

70 SRAM RED® eTap® HRD/ SRAM RED® HRD/ SRAM Force® HRD/ SRAM Rival® HRD/ SRAM Apex® HRD/ S-700 HRD Post Mount Frame/Fork Specification

Frame Mount - 130 and 135 QR Dropout Fork Mount Dropout Frame Clearance

95 min

0

10 min 0.94 0 38 min 6.44 5.5 10.5

11

15.5

71 SRAM RED® eTap® HRD/ SRAM RED® HRD/ SRAM Force® HRD/ SRAM Rival® HRD/ SRAM Apex® HRD/ S-700 HRD Post Mount Frame/Fork Specification

Direct mount rotor size A (mm) B(mm) C (mm) D (mm)

140 mm 47.2 2.2 47.2 89.8

160 mm 56.0 6.8 56.4 98.5

Chainstay Mount Seatstay Mount Fork Mount

B D 74.2 ±0.1

74.2 ±0.1 C D B A

74.2 ±0.1

A

A C B C

D

72 SRAM RED® eTap® HRD/ SRAM RED® HRD/ SRAM Force® HRD/ SRAM Rival® HRD/ SRAM Apex® HRD/ S-700 HRD/BB7™/ BB5™ Rotor Dimensions

Radiused (OD) Non-radiused (OD) Rotor size A (mm) A (mm)

140 mm 140.8 140

160 mm 160.8 160

Rotation

A Outer Diameter (OD)

NOTES 1 Rotor mounting bolt value is 6.2 N·m (55 in-lb). ⚠WARNING 2 Use only 10 mm length rotor bolts. Ø34.8 Rotor bolts longer than 10 mm will not Max clearance secure the rotor to the wheel hub.

Ø5.5 thru 6x, Ø44 equally spaced Bolt circle 1.85

73 RED/Force/Rival

Flat Mount Caliper Front Frame Specification

SRAM RED® eTap® HRD/ SRAM RED® HRD/ SRAM Force® HRD/ SRAM Rival® HRD/ SRAM Apex® HRD Flat Mount Caliper Fork Specification

Min 13 mm Boss Min 10 mm depth diameter M5x0.8-6H (2X)

40° max dropout angle

Co-planar 70 ±0.15 mounting Bolt hole spacing surfaces

1.7±0.4 Dropout face to hole pattern centerline

23.5 ±0.15

See hub specification for dropout face to rotor mounting face dimension 11 ±0.15 Dropout to mounting face

74 RED/Force/Rival

Flat Mount Caliper Rear Frame Specification

SRAM RED® eTap® HRD/ SRAM RED® HRD/ SRAM Force® HRD/ SRAM Rival® HRD/ SRAM Apex® HRD Flat Mount Caliper Frame Specification

16 ±0.15

Min dropout angle 69° Rear mount thickness 10, 15, 20, 25, 30, or 35 ±0.5

Underside of boss 5.2 ±0.1 to accommodate Ø14 min 11 mm diameter Boss diameter washer.

See hub specification for dropout face to rotor mounting face NOTES dimension 34 ±0.15 36.5 ±0.15 1 Frame and caliper interface may reach 120°C. +0.5 Slot spacing (2X) 3 -1.0 Rear slot centerline to (2X) 2.05 ±0.4 Slot width axle centerline Dropout face to outboard most mounting location

75 SRAM RED® eTap® HRD/ SRAM RED® HRD/ SRAM Force® HRD/ SRAM Rival® HRD/ SRAM Apex® HRD Flat Mount Caliper Frame Specification

5-7 mm

⚠WARNING - CRASH HAZARD NOTES There must be 5-7 mm of mounting bolt thread engagement when mounting brake calipers to forks and frames with flat mount hardward and brackets. Riding a bike with improper bolt engagement can allow the brakes to disengage from the 1 Available in rear bolt lengths: bicycle, which can lead to a crash and serious injury or death to the rider. 17, 22, 27, 32, 37, and 42 mm

76 SRAM RED® eTap® HRD/ SRAM RED® HRD/ SRAM Force® HRD/ SRAM Rival® HRD/ SRAM Apex® HRD/ S-700 HRD/ BB7™/ BB5™ Spoke Clearance

180 mm ± 0.5 170 mm ± 0.5 160 mm ± 0.5

140 mm ± 0.5

61 mm Max 1 Spoke clearance

2

18.26 Min 19.12 Min Rotor Mounting Face 20.09 Min

Hub Axis 3 20.57 Min

21.05 Min

NOTES 1 Wheel designer to determine the safe clearance distance from the caliper to account for wheel flex and tolerance stack. 2 Caliper body will not extend beyond this datum. Datum accounts for caliper manufacturing tolerances and variation in pad advancement 3 Caliper position shown for 160 mm rotor.

77 BB7™/ BB5™ Road Mechanical Disc Brake Clearance

15° 22.20

14.23

11.5

47.91 26.26 4

2

78 SRAM RED eTap®/ SRAM RED®/ SRAM Force®/ SRAM Rival®/ SRAM Apex®/ S-700/ S-500 Rim Brake Caliper Design Dimensions

Front Rim Brake Caliper Rear Rim Brake Caliper 360

356

352 Dim B

348

344 90° -25 0 25 75 90° Dim A

Brake Caliper Pivot Location (Short Reach 39-49 mm)

Dim A -25 25 75 Max 355 360 355 Dim B B Min 346 350 346 B

A NOTES 1 For maximum tire clearance, use the top 1/3 A of the graph. (+) (-) (+) (-)

79 SRAM RED eTap®/ SRAM RED®/ SRAM Force®/ SRAM Rival®/ SRAM Apex®/ S-700/ S-500 Rim Brake Caliper Design Dimensions

Front Brake Caliper Rear Brake Caliper

39 49

29 39 49 33

29 27 33

27

80 S-990/S-900/S-500 Aero Brake Lever Bar Guidelines

NOTES 1 Bar guidelines: Round inner diameter of 19.5 mm to 21.0 mm with unobstructed minimum insertion of 36.5 mm.

81 SINGLE DIGIT®

Link to Arm Dimension Brake Pad Adjustment Slot

The link must be a minimum of 38 mm from the inside edge of the cable Single Digit Brakes arm to prevent the link from contacting the cable anchor arm. If the link Min 21.25 mm and arms are too far apart, the top of the brake arm can extend too far from the frame or fork and interfere with the rider's feet. Max 35 mm

> 38 mm

19 mm

38 mm

19 mm

82 SINGLE DIGIT® Cable Link/Noodle/Boot

⚠WARNING - CRASH HAZARD Do not use roller-type noodles with Avid side-pull brakes. Due to the radius of most roller-type noodles, and the diameter of the brake cable, there is a safety concern.

Overcoat Boot Installation NOTES 1 The Avid® cable link on all side-pull brakes is made of stainless steel and is riveted onto the brake arm. It is specifically designed for use with the Avid noodle. 2 The Avid noodle on Single Digit 7/SL is specifally designed to allow the installation and removal from the link without removing the Overcoat boot from the noodle tip. 3 The noodle is available in the following bends: 90, 110, and 135 degrees.

83 Shorty™ Ultimate Dual Mounted Brake Caliper

250 mm straddle wire (recommended)

145 mm 90° (recommended) to top of cable hanger 18-23 mm rim width*

79-82 mm brake boss spacing

NOTES 1 For wheel rims wider than 23 mm, consult the spare parts catalog on www.sram.com/service for part numbers.

84 Shorty™ 6/ Shorty™ 4 Cable Carrier and Straddle Cable Length

Length of Opening angle of Designed width of Total height Designed height Total width straddle cable straddle cable Shorty Pivot width Opening

A (mm) C D (mm) H 9mm) h (mm) W (mm)

CCC Type S 63 100° 92.94 51.61 63.21 39.65

CCC Type A 73 95° 106.12 53.82 67.64 44.08

CCC Type B 82 87° 31.78 116.28 56.80 56.45 72.89 49.33

CCC Type C 106 80° 138.00 68.14 96.27 72.71

CCC Type D 93 90 122.56 65.76 91.52 67.96

W/2

18-23 mm A rim width C/2

H Opening

D h 31.78 56.8

79- 82 mm brake boss spacing

85 Mechanical Brake Compatibility

Caliper and Lever Compatibility

SRAM RED®/ SRAM SINGLE DIGIT® SL™/ Shorty™4/ Shorty 6/ Force®/ SRAM Rival®/ BB7™ Road/ BB5™ Road BB7 MTB/ BB5 MTB SINGLE DIGIT 7/ SINGLE Shorty Ultimate SRAM Apex®/S-700 DIGIT 5/ SINGLE DIGIT 3

SRAM RED eTap®, SRAM RED/ Road Shift-Brake SRAM Force/ SRAM Rival/ SRAM x x x Levers Apex

S990 Aero/ S900 Aero/ S900 Road Brake Road/ S700 Flat Bar/ S500 Aero/ x x x Levers S500 Road/ SRAM Force, SRAM Rival, SRAM Apex

MTB Brake Speed Dial 7, FR5™, Via GT x x Levers

NOTES Range of Speed Dial 1 Brake levers with a cable pull of more than Min. Cable Pull Leverage Ratio Max. Cable Pull Leverage Ratio 32 mm are compatible with Avid Single Digit, FR-5 29 BB7 MTB, and BB5 MTB mechanical disc 25 2:1 2.75 : 1 brakes, but reduce brake power. Speed Dial 7 & SL 32 2 Avid® Single Digit, BB7 MTB, and BB5 MTB mechanical disc brakes are compatible with virtually all side-pull specific brake levers. As with any side-pull brake, it is recommended to use adjustable leverage brake levers when using Single Digit, BB7 MTB, and BB5 MTB mechanical disc brakes.

86 Wheels and Hubs

87 Zipp® Wheels Rim/Disc Design Parameters

Max width Depth at max width Max depth Radius to center axis Frame clearance 4 mm minimum per side

A (mm) B (mm) C (mm) R1 (mm) A 30™ Course CC 316.60 10.00 30 Course TU 316.25 25 26.00 30 Course CC DB 316.60 5.45 30 Course TU DB 316.25

202™ Firecrest & 202 NSW CC 25.65 13.01 32.54 316.62 B 202 TU 22.86 8.23

202 DB 25.41 12.14 32.82 316.67

303™ Firecrest & 303 NSW CC 19.45 28.25 46.60 316.62 303 Firecrest TU 19.08 C 303 Firecrest Tubeless DB 29.88 23.70 45.50 316.67

404™ Firecrest & 404 NSW CC 27.8 26.06 58.75 316.62 404 Firecrest TU 27.32 25.13

404 650 C Firecrest CC 26.78 26.06 58.49 291.03 R1

808™ Firecrest & 808 NSW CC 27.8 50.05 81.82 808 Firecrest TU 27.17 49.77 316.62 900 TU DB 21.28

Super-9™ CC DB NA NA 28.25 Super-9 TU DB 317.54

30 CC 21.40 14.51 30.30 316.92 NOTES 1 Disc brake and rim brake wheels are combined unless otherwise noted. Center axis of wheel

CC: Carbon Clincher DB: Disc Brake TU: Tubular 88 Driver and Wheel Standard- Road

See detail A

75 Dropout distance Detail A: Scale 5:1 +1 10 sp: 40.6 -0.3 11 sp: 42.4 ±0.2

Max recess 1 Transition start max 0.5

Installation space border for drivetrain

Spoke clearance min 7 at 75 mm offset from wheel center

7

89 Driver and Wheel Standard- Road Continued

See detail B Detail B: Scale 10:1

Ø 38 +4 -1 Max R1

Max R0.4 Max R0.3

Max R0.3

90 Sub-SectionZipp® Hubs with Title Center - Shift+Ctrl Locking Click Disc to unlock Brake andMount edit text SupplementalFront Hub Specifications Text

A (mm) B (mm) C (mm) E (mm)

9x10 Quick Release Hub Ø 5.3 ± 0.1 Ø 19.5 ± 0.1 Ø 8.85 ± 0.05

12x100 Thru Axle Hub 100.0 ± 0.75 Ø 12.0 + 0.1 Ø 18.7 ± 0.1 N/A 15x100 Thru Axle Hub Ø 15.0 + 0.1

Quick Release Hub Thru Axle Hub

A A

B E C B C

91 Sub-SectionZipp® Hubs with Title Center - Shift+Ctrl Locking Click Disc to unlock Brake andMount edit text SupplementalRear Hub Specifications Text

A (mm) B (mm) C (mm) E (mm) F (mm)

10x135 Quick Release Hub Ø 5.3 ± 0.1 Ø 19.5 ± 0.1 Ø 9.85 ± 0.05 135.0 ± 0.5 42.4 ± 0.2 12x135 Thru Axle Hub Ø 12.0 + 0.1 Ø 18.7 ± 0.1 N/A 12x142 Thru Axle Hub 142.0 ± 0.5 45.9 ± 0.2

Quick Release Hub Thru Axle Hub

A A F F

B E C B C

92 Sub-SectionZipp® Hubs with Title Center - Shift+Ctrl Locking Click Disc to unlock Brake andMount edit text SupplementalFront and Rear Text Hub Distance to Rotor

D (mm) Detail A: Scale 5:1

9x10 Quick Release Hub

12x100 Thru Axle Hub 10.5 ± 0.3

15x100 Thru Axle Hub

10x135 Quick Release Hub 15.25 ± 0.3 12x135 Thru Axle Hub

12x142 Thru Axle Hub 18.75 ± 0.3

Detail A

D 9

93 Sub-SectionZipp® Hubs with Title ISO - Shift+Ctrl 6 Bolt Disc Click Brake to unlock Mount and edit text SupplementalFront Hub Specifications Text

A (mm) B (mm) C (mm) D (mm) E (mm)

9x100 Quick Release Hub Ø 5.3 ± 0.1 Ø 19.5 ± 0.1 Ø 8.85 ± 0.05

12x100 Thru Axle Hub Ø 12.0 + 0.1 Ø 19.0 ± 0.1 100.0 ± 0.75 10.5 ± 0.3 15x100 Thru Axle Hub Ø 15.0 + 0.1 N/A Ø 19.5 ± 0.1 9x100 Thru-bolt Hub Ø 9.0 + 0.1

Quick Release Hub Thru Axle and Thru-bolt Hub

A A D D

B E C B C

94 Sub-SectionZipp® Hubs with Title ISO - Shift+Ctrl 6 Bolt Disc Click Brake to unlock Mount and edit text SupplementalRear Hub Specifications Text

A (mm) B (mm) C (mm) D (mm) E (mm) F (mm)

10x135 Quick Release Hub Ø 5.3 ± 0.1 Ø 19.5 ± 0.1 Ø 9.85 ± 0.05 135.7 ± 0.3/-1.0 15.5 ± 0.2 42.4 ± 0.2 12x135 Thru Axle Hub Ø 12.0 + 0.1 Ø 19.0 ± 0.1 12x142 Thru Axle Hub 142.7 ± 0.3/-1.0 19.0 ± 0.2 N/A 45.9 ± 0.2

10x135 Thru-bolt Hub 135.7 ± 0.3/-1.0 Ø 10.0 + 0.1 Ø 19.5 ± 0.1 15.5 ± 0.2 42.4 ± 0.2

Quick Release Hub Thru Axle and Thru-bolt Hub

A A F F D D

B E C B C

95 Sub-SectionZipp® Rim Brake Title Hubs - Shift+Ctrl Click to unlock and edit text SupplementalFront Hub Specifications Text

A (mm) B (mm) C (mm) E (mm) 9x100 Quick Release Hub 100 ± 0.75 Ø 5.3 ± 0.1 Ø 18.3 MAX Ø 8.85 ± 0.05

A

B E C

96 Sub-SectionZipp® Rim Brake Title Hubs - Shift+Ctrl Click to unlock and edit text SupplementalRear Hub Specifications Text

A (mm) B (mm) C (mm) E (mm) F (mm) 10x130 Quick Release Hub 130.7 ± 0.3/-1.0 Ø 5.3 ± 0.1 Ø 19.5 ± 0.1 Ø 9.85 ± 0.05 42.4 ± 0.2

A F

B E C

97 Sub-SectionMaxle™ Description Title - Shift+Ctrl Decoder Click to unlock and edit text Supplemental Text

Length

Thread Length

Thread Diameter

Thread Pitch

AX MAXLE ULT FRONT L148 TL9 M15 X 1.5

Platform: Axle Model: Maxle Ultimate Orientation: Front Length: 148 mm Thread Length: 9 mm Thread Diameter: 15 mm Thread Pitch: 1.5 mm

98 Sub-SectionMaxle Ultimate™ Title - Shift+Ctrl Click to unlock and edit text Supplemental Frame / Fork ClearanceText

Lever in Closed Position

21.5921.59

Ø 24

65.24

7.62

NOTES Lever in Open Position 1 Drawing is not to scale. 30.77 2 Customer is responsible for ensuring hub, frame, and axle compatibility. 3 The frame manufacturer is responsible for ensuring the frame and/or fork assemblies 62.96 using Maxles are compliant with existing safety standards. 4 Head translates along the Maxle axis approximately 1.46 mm when lever is moved from open to closed.

99 Sub-SectionMaxle Stealth™ Title - Shift+Ctrl Click to unlock and edit text Supplemental Text

Ø 19

SEE TABLE

DESCRIPTION HEX SIZE TORQUE VALUE

Maxle 12 5 9-13.5 N•m

Maxle 15 6 9-13.5 N•m

NOTES 1 Drawing is not to scale. 2 Customer is responsible for ensuring hub, frame, and axle compatibility. 3 The frame manufacturer is responsible for ensuring the frame and/or fork assemblies using Maxles are compliant with existing safety standards.

100 Sub-SectionMaxle Lite™ & Title Maxle - Shift+Ctrl Click to unlock and edit text SupplementalFrame / Fork Clearance Text

Lever in Closed Position

6 mm hex Ø 28 Torque to 4.5 N·m (+/-0.2) [39.8 in-lb (+/-1.8)]

Ø25

64.5 1.9 22.5

17.8 Lever in Open Position NOTES 6° 1 Drawing is not to scale. 2 Customer is responsible for ensuring hub, frame, and axle compatibility. 7 3 The frame manufacturer is responsible for ensuring the frame and/or fork assemblies using Maxles are compliant with existing safety standards.

101 Sub-SectionMaxle™, Maxle Title Lite™, - Shift+Ctrl Maxle Ultimate™, Click to unlock Maxle andStealth™ edit text SupplementalRear Frame Specification Text

Frame dropouts with axle installed

A 16 min 16 min OLD

24 min flat surface

Ø 12 Section A-A

A

102 Sub-SectionMaxle™, Maxle Title Lite™, - Shift+Ctrl Maxle Ultimate™, Click to unlock Maxle andStealth™ edit text SupplementalFork Specification Text

DESCRIPTION A B

MAXLE 15 14.98 M15 X 1.5 - 6H

MAXLE 12 12.03 M12 X 1.5 - 6H

OLD

103 Sub-SectionMaxle™, Maxle Title Lite™, - Shift+Ctrl Maxle Ultimate™, Click to unlock Maxle andStealth™ edit text SupplementalFork Specification Text

A

Section A-A

M15 X 1.5 - 6H 15.01 Ø 14.95

24 min flat surface OLD A 15.9±0.1 24 min 24 min

104 www.sram.com

ASIAN HEADQUARTERS WORLD HEADQUARTERS EUROPEAN HEADQUARTERS SRAM Taiwan SRAM LLC SRAM Europe No. 1598-8 Chung Shan Road 1000 W. Fulton Market, 4th Floor Paasbosweg 14-16 Shen Kang Hsiang, Taichung City Chicago, Illinois 60607 3862ZS Nijkerk Taiwan R.O.C. U.S.A. The Netherlands