sign in sign up
<<
Home , Candelilla wax, Carnauba wax, Paraffin wax, Rice bran wax, Rosin

1

Natural

Candelilla – Unique Segmentation and Refining process Fraction Product What and why? Description Application s and % of use Tests *Adsorbent refining of Stick resistance with Candelilla Wax CG-4 *Highly refined Candelilla Waxes with low and impurities level Off-White tablets different oils and silicones Candelilla Wax CG-7 *Low level of impurities helps controlling phase change transition temperature *Long-Lasting Hardness of hot poured formulation MP: 68-72°C vs conventional Candelilla (pages 5-6 brochure) *Low level of resin helps to better organize the matrix and increase hardness *Good compatibility with silicone oils Wax wax and ozokerite *CG-7 higher purity than CG-4 *10-15% * with and adsorbent refining of Candelilla Wax / FOUNDATION / PENCIL Stick resistance with Candelilla wax SR-3 Yellow tablets *Highly refined Candelilla Wax with extremely low resin level different oils vs Candelilla (page 7 brochure) MP: 70-75°C *Higher and higher hardness due to very lower resin level wax conventional *Broad and Soft S preading but Solidity preserved *Resin extraction with ethanol and segmentation with silica gel column *Exudation reduction Stick resistance vs *High MW fraction of Candelilla Wax *Microcrystalline and substitute Candelilla wax Candelilla Wax FR-100 Yellow/Orange tablets Ester *Thin network for spreading improvement *Recommended to be used in combination with conventional and PE wax (pages 8-9 brochure) MP: 75-85°C *Whole matrix MW increased for exudation reduction linear hydrocarbon wax for stick resistance Stick surface hardness vs *Sharp MW distribution providing high stability *2-10% PE wax LIPSTICK / FOUNDATION / PENCIL *Resin extraction with ethanol and segmentation with silica gel column *High Solidity Stick resistance with *Linear Hydrocarbon Fraction of Candelilla Wax *Unique compatibility with silicone oils silicone and mineral oils FC-31 *Long and linear hydrocarbon chains create a strong crystal network and White tablets *Recommended to be used in combination with Hydrocarbon and ozokerite wax vs (pages 10-11 brochure) increase hardness MP: 60/70°C PE or ozokerite wax for solidity improvement control (ozokerite wax *Very narrow distribution of chain length which makes the phase change *2-8% only) transition very brutal LIPSTICK / FOUNDATION / PENCIL *Resin extraction with ethanol E-1: Hard Orange *Film-forming, Plastifying, Adhesion, Shine Candelilla Resin E-1 *Pure resin fraction of Candelilla Wax crystals Candelilla Resin E-2 *UV Filters crystallization prevention *Very high temperature required for formulation E-2: Hard and Yellow * and rosin substitute (lower (pages 12-14 brochure) *E-2 highly refined version (low odor, light color) crystals softening point) Mascara application with Lash Polymer CR -60 *High viscosity oils don’t exist in the nature! Resin *60% Candelilla Resin E-1 in isododecane to ease the formulation at RT Yellow viscous liquid and without Candelilla (page 16 brochure) *Floragrease helps color stability and dispersion Resin ( type) FloraGrease S and J *60 -65% Candelilla Resin E -2 in natural (sugar cane squalene or jojoba (high polarity pigments bind with high polarity Light Yellow liquid (page 15 brochure) oil) to ease the formulation at RT resin in low polarity oils) *60 -65% Candelilla Resin in natural (jojoba oil and sunflower wax) to *1-5% GrenGrease Light Yellow gel ease the formulation at room temperature MASCARA / EYELINER / LIPGLOSS / LIPSTICK

Carnauba Wax Fraction Product What and why? Description Application s and % of use Tests *100% Natural F ormulation *Hardness *Highly refined (T-1 refers to the higher degree of refining) *Good compatibility with natural oils *Its long linear chains bring string hardness Stick resistance in Carnauba Wax T-1 Light Yellow tablets *Microcrystalline and paraffin wax substitute Wax *Stronger lipstick structure and better transfer resistance than Candelilla for different oils vs Carnauba (page 17 brochure) MP: 78-83°C *Recommended to be used in combination with natural formulation Wax Conventional high viscous oils *Sharp MW distribution providing high stability *10-15% LIPSTICK / FOUNDATION / PENCIL

Hot poured formulation structure : Long and linear hydrocarbon chains High MW branched/polar chains Oils 2

Synthetic Waxes Product What and why? Description Application s and % of use Tests *Strong H ar dness *Paraffin wax substitute *Linear PE Wax (even number of ) with narrow and high MW *Recommended to be used in combination with a Lipwax A-4 *Perfect control of the phase change transition White tablets high polarity wax such as Carnauba Wax T-1 or (page 20-23 brochure) *Consistent solidity in combination with a wide range of oils at a lower % than MP: 98-104°C Candelilla Wax FR100 (esters) any other conventional linear PE wax for smoother and lighter skin feel *10-13% LIPSTICK / PENCIL *Mixture of linear and high MW Fischer -Tropsch Wax (odd number of *Strong H ardness but Soft Spreading hydrocarbons ) and Branched Copolymer /Polypropylene *Exudation reduction Lipwax PZ80-20 *The Linear Fischer-Tropsch Wax creates a thin crystal network to bring White tablets *Microcrystalline and ozokerite wax substitute Stick resistance in (page 20-23 brochure) hardness but soft spreading and the Branched Copolymer is dispersed into the MP: 88-94°C *May be used as its own different oils oil matrix and increases the MW and therefore reduces exudation. *10-13% *Precise MW of both polymers allows controlling phase change transition LIPSTICK / PENCIL *Strong Hardness Mascara spreading vs PE *Adhesion and Spreading wax conventional in Lashwax P *Branched PE Wax (lower solidity) White tablets *Water Resistance isododecane (pages 25-26 brochure) *Very fine crystals (microcrystalline properties) MP: 83-95°C *10% Mascara application vs MASCARA / LINER / in isododecane

Hybrid Waxes Products What and why? Description Application s and % of use Available t ests *Strong Hardness but Soft Spreading *Mixture of linear and high MW Fischer-Tropsch Wax (odd number of *Exudation reduction hydrocarbons), Branched Copolymer Polyethylene/Polypropylene and 30% Off-White beads *Microcrystalline and ozokerite wax substitute Stick resistance Lipwax NPZ-1 Carnauba Wax T-1 MP: 84-87°C *May be used as its own Shining properties *Same mechanism and performances as Lipwax PZ80-20 but higher natural *10-13% content, easier to use and more shiny; MW and MP higher than Smart Wax LIPSTICK / PENCIL *Mixture of linear PE Wax (even number of hydrocarbons) with narrow and *Strong H ar dness high MW and 30% Carnauba Wax T-1 Off-White beads *Paraffin wax substitute Lipwax NA-1 Stick resistance *Same mechanism and performances as Lipwax A-4 but higher natural content MP: 84-87°C *10-13% and easier to use; MW and MP higher than Smart Wax LIPSTICK / PENCIL *Strong Hardness but Very Soft Spreading *Exudation reduction *Mixture of 60-85% linear and high MW Fischer-Tropsch Wax , 14-30% Ratio between solidity Smartwax 7743S Off-White tablets *Ceresin, paraffin and ozokerite wax substitute Candelilla Wax FR-100 (esters) and 1-5% Carnauba Wax T-1 and spreadability vs other (pages 28-30 brochure) MP: 77-85°C *May be used as its own *Same mechanism as Lipwax PZ80-20 but higher natural content stick formulations *12% LIPSTICK / PENCIL *Mixture of 60 -85% linear and high MW Fischer -Tropsch Wax and Carnauba *Strong Hardness but Soft Spreading Ratio between solidity Smartwax 202S Wax T-1 Off-White tablets *5-12% and spreadability vs other (pages 31-33 brochure) *Same mechanism as Lipwax PZ80-20 but higher natural content MP: 75-86°C LIPSTICK / PENCIL stick formulations *NO CITES needed/NO Candelilla *High amount of wax without unwanted solidity Lashwax RP3010 *Mixture of Branched PE Wax and Yellow tablets / Yellow *Quick Dry (lower amount of solvent) Lashwax RP310 Paste 40 *Paste40: 40% of PE Wax and Rice Bran Wax in isododecane (hemisqualane paste *20% (pages 34-36 brochure) possible as well); to be incorporated at the end of the process MP: 81-86°C MASCARA / EYELINER

Hot poured formulation s tructure : Long and linear hydrocarbon chains High MW branched/polar chains Oils 3

Other products Products What and why? Description Application s and % of use Available t ests *RP4010 Paste 40: Mixture of PE W ax and Rice Bran Wax in isododecane or *High amount of wax without unwanted solidity RP: Light Yellow paste Filler Wax RP4010 Paste 40 (HS/SQ) hemisqualane (HQ) or squalane (SQ) *Easy Use and Application MP: 78-82°C Filler Wax BP4010 Paste 40 (HS/SQ) *BP4010 Paste 40: Mixture of PE Wax and Rice Bran Wax in isododecane or *Water Resistance BP: White paste (pages 37 brochure) hemisqualane (HQ) or squalane (SQ) *5-10% MP: 61-65°C *Made with highly refined rice bran wax and ester fraction of beeswax FOUNDATION / MASCARA / EYELINER *Mixture of Carnauba Wax High Hydroxyl value, Ester Fraction of Beeswax, *High amount of wax (used l ike a powder) without Filler Wax Binder CBR 35 highly refined Rice Bran Wax and High MW Branched PE Wax in hemisqualane White paste unwanted solidity Advanced BN *Different crystal sizes MP: 81-86°C *Binding without oily skin feel (pages 38-39 brochure) *Advanced BN is Filler Wax Binder CBR 35 coated with boron nitride White powder *5% for Filler Wax and 2-10% for Advanced BN *Highly refined Beeswax Esters create 10 micron spherical crystals PRESSED POWDERS *Sticky rice powder rich in Amylopectin *Prevent cracki ng Rice Powder BF *Water and oil resistant but not absorbent *Matte effect White powder Oil Delivery Powder M *Oil Delivery Powder M is Rice Powder BF with Dimethicone (can be developed FOUNDATION / PRESSED AND LOOSE POWDERS / with other oils, low polarity), to add oil in compact powders LIPSTICK *Ester fraction of Beeswax *Natural esters make crystals in low polarity oils, it is ideal for matte to Beeswax SS65 LIPSTICK / PENCIL use less powder content and get less dry sticks (usually 10% powders, possible to lower to 5% with this product)