Chlorodimethylsilane Technical Data

Total Page：16

File Type：pdf, Size：1020Kb

CHLORODIMETHYLSILANE TECHNICAL DATA Chemical Name:Chlorodimethylsilane CAS.NO:1066-35-9 Synonyms:Dimethylchlorosilane; chloro(dimethyl)silicon; ChlorodiMethylsilane; Molecular Formula:C2H7ClSi Molecular Weight:94.61550 Physical and Chemical Properties: Density:0.852; Melting point:-111oC; Boiling point:34.7oC; Flash point:-25oC; Index of Refraction:1.383; Specification: Appearance:Colorless clear liquid Purity(GC):≥96.0% Packing:170 kg/drum, can also be packaged according to customer requirements Storage:Store in a cool, ventilated place Application:All chlorosilanes react with water to produce hydrogen chloride. The remaining hydroxyl group bonds to the silicon, initially forming a silol group(analogous to alcohol). In general, this will eventually bond to a solid oxide surface or react with another chlorosilane or silol molecule. In the latter cases, the oxygen atom forms a link between two silicon atoms, analogous to the ether linkage in organic chemicals, and identical to the bonding in silicon dioxide. Organic chlorosilanes are usually used as coatings for silicon and glass surfaces, and in the production of silicone(polysiloxane) polymers. Methyl chlorosilanes have one to three methyl groups. In the case of dichlorodimethylsilane, two chlorine atoms are available, so thata reaction with excess water produces a linear chain of ether-like linkages between silicon atoms. As in polyethers, these flexiblelinkages produce a rubbery polymer, polydimethylsiloxane (PDMS). Trichloromethylsilane can be used to induce branching and crosslinking in PDMS molecules, while chlorotrimethylsilane serves to end backbone chains, limiting molecular weight. NINGBO INNO PHARMCHEM CO.,LTD. was established in 2007. The company team has 30 years of experience in R&D, production and management, and sales experience in domestic and foreign markets, striving to create a high-efficiency and high-quality integrated chemical service platform to better serve domestic and foreign customers.If you are looking for Chlorodimethylsilane manufacturer and Chlorodimethylsilane supplier,we should be your right choice! Sales Contact: E-mail: [email protected] Tel:86-574-87319282 87314919 Fax:86-574-27912196 Website:www.nbinno.com.

Copy Link

Recommended publications

EPA Handbook: Optical and Remote Sensing for Measurement and Monitoring of Emissions Flux of Gases and Particulate Matter
EPA Handbook: Optical and Remote Sensing for Measurement and Monitoring of Emissions Flux of Gases and Particulate Matter EPA 454/B-18-008 August 2018 EPA Handbook: Optical and Remote Sensing for Measurement and Monitoring of Emissions Flux of Gases and Particulate Matter U.S. Environmental Protection Agency Office of Air Quality Planning and Standards Air Quality Assessment Division Research Triangle Park, NC EPA Handbook: Optical and Remote Sensing for Measurement and Monitoring of Emissions Flux of Gases and Particulate Matter 9/1/2018 Informational Document This informational document describes the emerging technologies that can measure and/or identify pollutants using state of the science techniques Forward Optical Remote Sensing (ORS) technologies have been available since the late 1980s. In the early days of this technology, there were many who saw the potential of these new instruments for environmental measurements and how this technology could be integrated into emissions and ambient air monitoring for the measurement of flux. However, the monitoring community did not embrace ORS as quickly as anticipated. Several factors contributing to delayed ORS use were: • Cost: The cost of these instruments made it prohibitive to purchase, operate and maintain. • Utility: Since these instruments were perceived as “black boxes.” Many instrument specialists were wary of how they worked and how the instruments generated the values. • Ease of use: Many of the early instruments required a well-trained spectroscopist who would have to spend a large amount of time to setup, operate, collect, validate and verify the data. • Data Utilization: Results from path integrated units were different from point source data which presented challenges for data use and interpretation.
[Show full text]
The Synthesis and Characterization of Binuclear Zirconocene Complexes and Their Study As Initiators in the Polymerization of M
END-GROUP FUNCTIONALIZATION OF ANIONICALLY SYNTHESIZED POLYMERS VIA HYDROSILATION REACTIONS A Dissertation Presented to The Graduate Faculty of The University of Akron In Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy Hoon Kim May, 2006 END-GROUP FUNCTIONALIZATION OF ANIONICALLY SYNTHESIZED POLYMERS VIA HYDROSILATION REACTIONS Hoon Kim Dissertation Approved: Accepted: Advisor Department Chair Dr. Roderic P. Quirk Dr. Mark D. Foster Committee Member Dean of the College Dr. Joseph P. Kennedy Dr. Frank N. Kelley Committee Member Dean of the Graduate School Dr. William Brittain Dr. George R. Newkome Committee Member Date Dr. Coleen Pugh Committee Member Dr. Chrys Wesdemiotis ii ABSTRACT One of the unique features of living, alkyllithium-initiated, anionic polymerization is the ability to produce a stable carbanionic chain end after complete monomer consumption, which can be followed by reaction with electrophiles to form various end- functionalized polymers. Although a variety of functional polymers have been synthesized in the last few decades, each specific functionalization has had to be designed and optimized individually. Consequently, the development of general functionalization methodologies has drawn recent interest. However, even these general functionalization methods require the use of protecting groups, and the complexity in synthetic routes and the thermal/moisture instability of many protected functional agents have restricted their practical application. This thesis describes a new, general functionalization methodology, combining well-defined, living anionic polymerization with efficient and highly selective, platinum-catalyzed hydrosilation reactions with functionalized alkenes. Well-defined, Si-H functionalized polymers (P-SiH) have been synthesized by sec- butyllithium-initiated, living anionic polymerization in benzene followed by termination with dimethylchlorosilane.
[Show full text]
A Review of Organosilanes in Organic Chemistry
A Review of Organosilanes in Organic Chemistry • Silyl Protecting and Derivatisation Reagents • Organosilanes as Reducing Agents • Silanes in Cross-coupling Chemistry • Allylsilanes Used to Stabilize α-Carbanions and β-Carbocations INTRODUCTION Organosilanes have varied uses in organic chemistry from the most frequently employed protecting groups to intermediates in organic synthesis. The Acros Organics portfolio of organosilanes is continuously expanding to meet your chemistry needs. In this brochure you will find an overview of four of the most important applications of organosilanes: • Silyl Protecting and Derivatisation Reagents 1, 2 • Organosilanes as Reducing Agents 3 • Silanes in Cross-coupling Chemistry 4 • Allylsilanes Used to Stabilize α-Carbanions and β-Carbocations4 Silyl Protecting and Derivatisation Reagents Silicon protecting groups are probably the most frequently employed of all protecting groups, and modern natural product synthesis is inconceivable without them.5 Silylating agents are mostly used to protect alcohols and phenols, but have also found application in the protection of amines, carboxylic acids, amides, thiols and alkynes. By varying the substituents attached to silicon, the steric and electronic characteristics of the protecting group can be finely tuned, allowing a wide variety of both reaction and deprotection conditions. The leaving group also plays an important role in the reactivity and use of silylating reagents. Whilst chlorotrimethylsilane [product code: 42643] liberates hydrogen chloride on reaction,
[Show full text]
Hazardous Substances (Chemicals) Transfer Notice 2006
16551655 OF THURSDAY, 22 JUNE 2006 WELLINGTON: WEDNESDAY, 28 JUNE 2006 — ISSUE NO. 72 ENVIRONMENTAL RISK MANAGEMENT AUTHORITY HAZARDOUS SUBSTANCES (CHEMICALS) TRANSFER NOTICE 2006 PURSUANT TO THE HAZARDOUS SUBSTANCES AND NEW ORGANISMS ACT 1996 1656 NEW ZEALAND GAZETTE, No. 72 28 JUNE 2006 Hazardous Substances and New Organisms Act 1996 Hazardous Substances (Chemicals) Transfer Notice 2006 Pursuant to section 160A of the Hazardous Substances and New Organisms Act 1996 (in this notice referred to as the Act), the Environmental Risk Management Authority gives the following notice. Contents 1 Title 2 Commencement 3 Interpretation 4 Deemed assessment and approval 5 Deemed hazard classification 6 Application of controls and changes to controls 7 Other obligations and restrictions 8 Exposure limits Schedule 1 List of substances to be transferred Schedule 2 Changes to controls Schedule 3 New controls Schedule 4 Transitional controls ______________________________ 1 Title This notice is the Hazardous Substances (Chemicals) Transfer Notice 2006. 2 Commencement This notice comes into force on 1 July 2006. 3 Interpretation In this notice, unless the context otherwise requires,— (a) words and phrases have the meanings given to them in the Act and in regulations made under the Act; and (b) the following words and phrases have the following meanings: 28 JUNE 2006 NEW ZEALAND GAZETTE, No. 72 1657 manufacture has the meaning given to it in the Act, and for the avoidance of doubt includes formulation of other hazardous substances pesticide includes but
[Show full text]
Dräger Gas List 2015 List of Detectable Gases and Vapours Dräger Gas List 2015 List of Detectable Gases and Vapours
D-34313-2009 Dräger Gas List 2015 List of detectable gases and vapours Dräger Gas List 2015 List of detectable gases and vapours Gas list to find a suitable fixed installed Dräger gas detection instrument for the detection of a specified substance Edition July 2015 Subject to alteration Dräger Safety AG & Co. KGaA Lübeck, 2015 04 | DRÄGER GAS LIST 2015 | SEARCH INDEXES Search Indexes This list of gases consists of three search indexes and the main part. The search indexes are suitable to find the substance in question by having only its CAS-number, its name (including short name or technical abbreviation), or its sum formula. Using the search indexes you will obtain the substance’s Search Index for Sum formula For every chemical formula - normally associated number to look for in the list of gases. given as a semi-structure formula - a If the substance is not listed, this does not necessarily sum formula exists. A sum formula is mean that this substance is not detectable. formed according to the Hill-system: Within each sum formula the element symbol C (for Carbon) is on the first Search Index for CAS-Number When searching 1.2-Dichloroethane place, the element symbol H (for The CAS-number is a worldwide used look for Dichloroethane, find tert- Hydrogen) on the second, followed by code to identify a chemical substance Butanol under Butanol and Methyl- all other element symbols in alphabetical non-ambiguously. This number is issued tertbutylether under Methylbutylether. order. For every element symbol the by the Chemical Abstracts Service order is given with increasing number of and is the easiest way to characterise This search index also lists short names atoms of the corresponding molecule.
[Show full text]
SILICONES USED for FOOD CONTACT APPLICATIONS Version 1 Œ 10.06.2004
PUBLIC HEALTH COMMITTEE COMMITTEE OF EXPERTS ON MATERIALS COMING INTO CONTACT WITH FOOD POLICY STATEMENT CONCERNING SILICONES USED FOR FOOD CONTACT APPLICATIONS Version 1 œ 10.06.2004 NOTE TO THE READER The following documents are part of the Policy statement concerning silicones used for food contact applications: Resolution ResAP (2004) 5 on silicones to be used for food contact applications Technical document No. 1 œ List of substances to be used in the manufacture of silicones used for food contact applications The documents are available on the Internet website of the Partial Agreement Division in the Social and Public Health Field: www.coe.int/soc-sp 2 TABLE OF CONTENTS Page Resolution ResAP (2004) 5 on silicones to be used for food contact applications ……………………………………………………………………….……. 4 Technical document No. 1 œ List of substances to be used in the manufacture of silicones used for food contact applications ……………………… 8 3 RESOLUTION RESAP (2004) 5 ON SILICONES USED FOR FOOD CONTACT APPLICATIONS 4 RESOLUTION RESAP (2004) 5 ON SILICONES USED FOR FOOD CONTACT APPLICATIONS (adopted by the Committee of Ministers on 1st December 2004 at the 907 th meeting of the Ministers‘ Deputies) (superseding Resolution AP AP (99) 3) The Committee of Ministers, in its composition restricted to the Representatives of Austria, Belgium, Cyprus, Denmark, Finland, France, Germany, Ireland, Italy, Luxembourg, The Netherlands, Norway, Portugal, Slovenia, Spain, Sweden, Switzerland and the United Kingdom, member states of the Partial Agreement in the Social and Public Health Field, Recalling Resolution (59) 23 of 16 November 1959, concerning the extension of the activities of the Council of Europe in the social and cultural fields; Having regard to Resolution (96) 35 of 2 October 1996, whereby it revised the structures of the Partial Agreement and resolved to continue, on the basis of revised rules replacing those set out in Resolution (59) 23, the activities hitherto carried out and developed by virtue of that resolution; these being aimed in particular at: a.
[Show full text]
Cocam 4, 16-18 April 2013 US/ICCA 1 SIDS INITIAL ASSESSMENT PROFILE Category Name Monomeric Chlorosilanes CAS No(S). 1066-35-9 7
CoCAM 4, 16-18 April 2013 US/ICCA SIDS INITIAL ASSESSMENT PROFILE Category Name Monomeric Chlorosilanes 1066-35-9 75-54-7 CAS No (s). 10025-78-2 10026-04-7 Chlorodimethylsilane (ClMe2SiH) Dichloromethylsilane (Cl2MeSiH) Chemical Name(s) Trichlorosilane (Cl3SiH) Tetrachlorosilane (Cl4Si) ClMe2SiH Structural Formula(s) Cl2MeSiH Cl3SiH This document may only be reproduced integrally. The conclusions and recommendations (and their rationale) in this document are intended to be mutually supportive, and should be understood and interpreted together. 1 CoCAM 4, 16-18 April 2013 US/ICCA Cl4Si SUMMARY CONCLUSIONS OF THE SIAR Analogue/Category Rationale These chemicals can be represented by a similar general molecular formula: (Cl)xSi(H)y(Me)z Where Cl = chlorine, x = 1, 2, 3, or 4; Si = silicon [=1]; H = hydrogen, y = 0 or 1; if y = 0, then x = 4 Me = CH3, z = 0, 1, or 2 Chlorosilanes react rapidly when exposed to moisture or polar reagents (those that contain a dissociable H+), producing hydrogen chloride (HCl; CAS No. 7647-01-0) and the corresponding silanols (in general, siloxane oligomers and polymers). The half lives of the monomeric chlorosilanes are expected to be < 1 minute based on data from the structurally similar chlorosilanes dichloro(dimethyl)silane (Cl2DMS) and trichloro(methyl)silane (Cl3MS). Data are not available on the hydrolysis of these compounds. However, the following is expected: ClMe2SiH is expected to hydrolyze to form one mole each of HCl and dimethylsilanol (note that dimethylsilanol can hydrolyze to form dimethylsilanediol (DMSD) ultimately through hydrolysis of the SiH bond, which is pH dependent and occurs most rapidly under alkaline conditions).
[Show full text]
Synthesis of Hydrogenated Thiol-Silanes for Selective Reactions Macartney Welborn Southern Methodist University, [email protected]
Southern Methodist University SMU Scholar Collection of Engaged Learning Engaged Learning Fall 11-23-2014 Synthesis of Hydrogenated Thiol-Silanes for Selective Reactions Macartney Welborn Southern Methodist University, [email protected] Follow this and additional works at: https://scholar.smu.edu/upjournal_research Part of the Chemistry Commons Recommended Citation Welborn, Macartney, "Synthesis of Hydrogenated Thiol-Silanes for Selective Reactions" (2014). Collection of Engaged Learning. 64. https://scholar.smu.edu/upjournal_research/64 This document is brought to you for free and open access by the Engaged Learning at SMU Scholar. It has been accepted for inclusion in Collection of Engaged Learning by an authorized administrator of SMU Scholar. For more information, please visit http://digitalrepository.smu.edu. Macartney Welborn ! ! ! ! ! ! ! ! Synthesis of Hydrogenated Thiol-Silanes for Selective Reactions ! ! Engaged Learning Final Report! ! Macartney Welborn! Mentor: Dr. David Son Ph.D. ! ! ! "1 Macartney Welborn Synthesis of Hydrogenated Thiol-Silanes for Selective Reactions Engaged Learning Final Report ! Abstract The intention of this experiment is to show the creation of multifunctional thiols from the reaction between various hydrochlorosilanes and mercaptoethanol in an attempt to utilize their distinct properties for practical applications. Multifunctional thiols have many useful applications including use in high-refractive-index lenses,1 heavy metal chelation,2 and degradable plastics.3 Previous work,5 in our lab has explored a class of reactions key to the synthesis of these compounds: the reaction between methylated chlorosilanes with mercaptoalcohols. We extended this reaction to include hydrogenated chlorosilanes. This allows us to produce multifunctional thiols with an additional functionalizable position at the hydrogen, allowing for greater flexibility in regards to practical applications.
[Show full text]
A Review of Organosilanes in Organic Chemistry
A Review of Organosilanes in Organic Chemistry • Silyl Protecting and Derivatisation Reagents • Organosilanes as Reducing Agents • Silanes in Cross-coupling Chemistry • Allylsilanes Used to Stabilize α-Carbanions and β-Carbocations INTRODUCTION Organosilanes have varied uses in organic chemistry from the most frequently employed protecting groups to intermediates in organic synthesis. The Acros Organics portfolio of organosilanes is continuously expanding to meet your chemistry needs. In this brochure you will find an overview of four of the most important applications of organosilanes: • Silyl Protecting and Derivatisation Reagents 1, 2 • Organosilanes as Reducing Agents 3 • Silanes in Cross-coupling Chemistry 4 • Allylsilanes Used to Stabilize α-Carbanions and β-Carbocations4 Silyl Protecting and Derivatisation Reagents Silicon protecting groups are probably the most frequently employed of all protecting groups, and modern natural product synthesis is inconceivable without them.5 Silylating agents are mostly used to protect alcohols and phenols, but have also found application in the protection of amines, carboxylic acids, amides, thiols and alkynes. By varying the substituents attached to silicon, the steric and electronic characteristics of the protecting group can be finely tuned, allowing a wide variety of both reaction and deprotection conditions. The leaving group also plays an important role in the reactivity and use of silylating reagents. Whilst chlorotrimethylsilane [product code: 42643] liberates hydrogen chloride on reaction,
[Show full text]
Global Safe Handling of Chlorosilanes
GLOBAL SAFE HANDLING OF CHLOROSILANES Developed by the Operating Safety Committees of the Silicones Environmental, Health and Safety Center, CES-Silicones Europe, in partnership with the Silicones Industry Association of Japan October 2017 TABLE OF CONTENTS CHAPTER 1 - INTRODUCTION 3 CHAPTER 2 - CHLOROSILANE NOMENCLATURE 5 CHAPTER 3 - HEALTH FACTORS 6 3.1 GENERAL 6 3.2 ACUTE TOXICITY 6 3.3 CHRONIC TOXICITY 8 CHAPTER 4 - PERSONAL PROTECTIVE EQUIPMENT 9 4.1 GENERAL 9 4.2 PROTECTIVE EQUIPMENT 9 CHAPTER 5 - TRAINING AND JOB SAFETY 12 CHAPTER 6 - FIRE HAZARDS AND FIRE PROTECTION 13 6.1 FIRE HAZARDS 13 6.2 FIRE PREVENTION 13 6.3 EXTINGUISHING AGENTS 14 6.4 MANUAL FIRE FIGHTING 15 6.5 FIXED FIRE PROTECTION 16 6.6 PLUME AND VAPOR CLOUD MITIGATION 17 CHAPTER 7 - SPILL CONTAINMENT AND ENVIRONMENTAL 19 IMPACT CHAPTER 8 - INSTABILITY AND REACTIVITY HAZARDS 20 8.1 INSTABILITY HAZARDS 20 8.2 REACTIVITY HAZARDS 20 CHAPTER 9 - MINIMUM ENGINEERING CONTROL OF HAZARDS 22 9.1 BUILDING DESIGN 22 9.2 EQUIPMENT DESIGN 22 9.3 VENTILATION 25 9.4 ELECTRICAL EQUIPMENT 25 9.5 STATIC ELECTRICITY 25 CHAPTER 10 - SHIPPING, LABELLING AND MARKING 27 CHAPTER 11 - HANDLING OF BULK CONTAINERS, DRUMS, PRESSURE DRUMS AND PRESSURE CYLINDERS 28 CHAPTER 12 - WASTE DISPOSAL 33 CHAPTER 13 - EQUIPMENT CLEANING AND REPAIRS 34 Update on October 2, 2017 2 GLOBAL SAFE HANDLING OF CHLOROSILANES CHAPTER 1. INTRODUCTION The Silicones Environmental, Health and Safety Center (SEHSC) and CES-Silicones Europe are not-for-profit trade associations comprised of North American and European silicone chemical producers and importers.
[Show full text]
Safety Data Sheet
SAFETY DATA SHEET Revision Date 14-Feb-2020 Revision Number 2 1. Identification Product Name Chlorodimethylsilane Cat No. : A13113 CAS-No 1066-35-9 Synonyms No information available Recommended Use Laboratory chemicals. Uses advised against Food, drug, pesticide or biocidal product use. Details of the supplier of the safety data sheet Company Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. 30 Bond Street Ward Hill, MA 01835-8099 Tel: 800-343-0660 Fax: 800-322-4757 Email: [email protected] www.alfa.com Emergency Telephone Number During normal business hours (Monday-Friday, 8am-7pm EST), call (800) 343-0660. After normal business hours, call Carechem 24 at (866) 928-0789. 2. Hazard(s) identification Classification This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Flammable liquids Category 1 Skin Corrosion/Irritation Category 1 B Serious Eye Damage/Eye Irritation Category 1 Specific target organ toxicity (single exposure) Category 3 Target Organs - Respiratory system. Label Elements Signal Word Danger Hazard Statements Extremely flammable liquid and vapor Causes severe skin burns and eye damage May cause respiratory irritation ______________________________________________________________________________________________ Page 1 / 8 Chlorodimethylsilane Revision Date 14-Feb-2020 ______________________________________________________________________________________________ Precautionary Statements Prevention Do not breathe dust/fume/gas/mist/vapors/spray Wash face, hands and any exposed
[Show full text]
A Review of Organosilanes in Organic Chemistry
A Review of Organosilanes in Organic Chemistry • Silyl Protecting and Derivatisation Reagents • Organosilanes as Reducing Agents • Silanes in Cross-coupling Chemistry • Allylsilanes Used to Stabilize α-Carbanions and β-Carbocations INTRODUCTION Organosilanes have varied uses in organic chemistry from the most frequently employed protecting groups to intermediates in organic synthesis. The Acros Organics portfolio of organosilanes is continuously expanding to meet your chemistry needs. In this brochure you will find an overview of four of the most important applications of organosilanes: • Silyl Protecting and Derivatisation Reagents 1, 2 • Organosilanes as Reducing Agents 3 • Silanes in Cross-coupling Chemistry 4 • Allylsilanes Used to Stabilize α-Carbanions and β-Carbocations4 Silyl Protecting and Derivatisation Reagents Silicon protecting groups are probably the most frequently employed of all protecting groups, and modern natural product synthesis is inconceivable without them.5 Silylating agents are mostly used to protect alcohols and phenols, but have also found application in the protection of amines, carboxylic acids, amides, thiols and alkynes. By varying the substituents attached to silicon, the steric and electronic characteristics of the protecting group can be finely tuned, allowing a wide variety of both reaction and deprotection conditions. The leaving group also plays an important role in the reactivity and use of silylating reagents. Whilst chlorotrimethylsilane [product code: 42643] liberates hydrogen chloride on reaction,
[Show full text]