DATA SHEET Datasheet Page 1 of 3 PI Revision 28-oct-14
General Description The ‘around-the-pump’ inductor is a foam concentrate proportioning unit designed for connection in a by-pass between the pressure and suction side of the fire water pump. This system diverts a small part of the feed water flow through the PI, with a negligible effect on the fire water line pressure. The proportioner inducts a rich solution which becomes the required proportion in the main stream.
Commonly used in marine applications, ‘around-the-pump’ inductors are also used on specialised foam trucks or fixed systems where a dedicated water pump is available. Order Information - Please Specify Product Features 1. Part number 2. Foam induction n Manufactured using corrosion resistant materials n Factory calibrated flow/pressure settings Part No. Description n Can be set to selected flows anywhere within the PI range n 122102105 PI-25 n Virtually no pressure drop effect n 122106106 PI-65 DIN n Cost effective, value added solution n 122106203 PI-65 ANSI n High quality, high reliability n 122210123 PI-100 DIN n Can be installed horizontally or vertically n 122210172 PI-100 ANSI n Integrated suction check valve and regulating valve n PI series ranges from 100 to 22,500 l/min system capacity and 1 to 680 l/min foam liquid suction capacity
Connections n Water / foam inlet: flanged to fit DIN PN16 or ANSI 150 lbs or screw threaded BSP
Listings and Approvals n Russian Maritime Register of Shipping (RMRS) n Tanusitvany (Hungary)
Tyco Park l Grimshaw Lane l Newton Heath l Manchester l M40 2WL Tel: +44 (0) 161 259 4000 l www.tfppemea.com l Copyright © 2013 Tyco Fire Products LP. Consilium Incendium AB Telephone: +46All 303 rights 44 00reserved. 30 E-mail: [email protected] www.incendiumfire.com Datasheet Page 2 of 3 PI Revision 28-oct-14
PI-25 PI-65
~180 250
DIN 65 Water Solution DIN 65 or or 21/2” 1”BSP 1”BSP 21/2” ANSI ANSI
Water Solution ~230 ~310
1”BSP
Foam conc.
2”BSP
Foam conc.
PI-100 DIN 100 or 4” Pump DIN 100 490 ±5 ANSI or 4” ANSI
Water Solution Fire water line foam solution Water suction line Feed water Around the pump inductor 482 ± 5
PI 65
Foam concentrate DIN 80 or 3” ANSI ~130
Foam conc.
Consilium Incendium AB Telephone: +46 303 44 00 30 E-mail: [email protected] www.incendiumfire.com Datasheet Page 3 of 3 PI Revision 28-oct-14
Performance Data Specification PI-25 PI-25
Feed water capacity Max. induction capacity Max. counter pressure 0.5 bar / 7.2 psi bar psi l/min USGPM l/min USGPM Max. working pressure 16 bar / 232 psi 6 87 76 20 65 17 Connection: Water Male 1” BSP 8 116 88 23 65 17 Connection: Foam Concentrate Female 1” BSP 10 145 98 26 65 17 Weight 3 kg / 6.6 lbs 12 174 107 28 65 17 Material: Inductor Brass Material: Foam conc. valve Brass
PI-65 PI-65
Feed water capacity Max. induction capacity Max. counter pressure 0.5 bar / 7.2 psi bar psi l/min USGPM l/min USGPM Max. working pressure 16 bar / 232 psi 6 87 230 61 255 67 65 DIN PN 16 or Connection: Water 2 1/2” ANSI 150 lbs 8 116 267 71 255 67 Female 2” BSP 10 145 300 79 255 67 Connection: Foam Concentrate or Male 2” NPT 12 174 327 86 255 67 Weight 14 kg / 31 lbs Material: Body Stainless steel Material: Nozzle, diffuser Polypropylene Material: Valve, check valve Brass
PI-100 PI-100
Feed water capacity Max. induction capacity Max. counter pressure 0.5 bar / 7.2 psi bar psi l/min USGPM l/min USGPM Max. working pressure 16 bar / 232 psi 6 87 620 164 680 180 100 DIN PN 16 or Connection: Water 4” ANSI 150 lbs 8 116 720 190 680 180 80 DIN PN 16 or 10 145 800 233 680 180 Connection: Foam Concentrate 3” ANSI 150 lbs 12 174 880 233 680 180 Weight 45 kg / 99 lbs Material: Body Stainless steel Material: Nozzle, diffuser Polypropylene Material: Valve, check valve Stainless steel Flange Galvanized steel
1 bar = 0.1 MPa = 14.5 psi
www.skum.com
Consilium Incendium AB Telephone: +46 303 44 00 30 E-mail: [email protected] www.incendiumfire.com