DOCSLIB.ORG

A Micro-Generation Manifesto

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

A micro-generation manifesto “green alliance... A micro-generation manifesto by Joanna Collins Published by Green Alliance, September 2004, £20 Artwork and print by Calverts – www.calverts.coop Printed on Revive matt – 75 per cent post-consumer waste. ISBN 0 9543813 7 8 © Copyright Green Alliance 2004 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, without the prior permission in writing of Green Alliance. Within the UK, exceptions are allowed in respect of any fair dealing for the purposes of private research or study, or criticism or review, as permitted under the Copyright, Design and Patents Act, 1988, or in the case of reprographic reproduction in accordance with the terms of the licences issued by the Copyright Licensing Agency. This book is sold subject to condition that it shall not, by way of trade or otherwise, be lent, resold, hired out or otherwise circulated without the publisher’s prior consent in any form of binding or cover other than that in which it was published and without a similar condition including the condition being imposed on subsequent purchaser. Front cover images, left to right: © Renewable Devices, © Solar Century, © Solar for London, © Solar for London, © Solar Century. Green Alliance 40 Buckingham Palace Road, London SW1W 0RE tel: 020 7233 7433 fax: 020 7233 9033 email: [email protected] website: www.green-alliance.org.uk Green Alliance is a registered charity number 1045395. Company Limited by guarantee, registered number 3037633 1 A micro-generation manifesto A micro-generation The micro-generation manifesto has been developed in consultation with members of the Energy Entrepreneurs Network. For more information on this network, visit www.green-alliance.org.uk Organisations supporting the manifesto include: British Wind Energy Association Combined Heat and Power Association Energy 21 Renewable Power Association Solar Century The Micropower Council The National Trust Town and Country Planning Association UK Business Council for Sustainable Energy acknowledgements Green Alliance wishes to thank the Ashden Trust for their generous support of the Energy Entrepreneurs Network, and of this report. We would also like to extend our thanks to all the organisations and individuals who were involved in the project. Particular thanks are due to Sebastian Berry, Sarah Butler-Sloss, Adrian Hewitt and Dave Sowden. Green Alliance Green Alliance is one of the UK’s foremost environmental groups. An independent charity, its mission is to promote sustainable development by ensuring that the environment is at the heart of decision-making. It works with senior people in government, parliament, business and the environmental movement to encourage new ideas, dialogue and constructive solutions. 2 contents executive summary . 3 the case for micro-generation . 4 behaviour change . 5 carbon reduction. 6 fuel poverty . 7 security of supply . 8 economic value . 8 system resistance . 9 energy markets . 9 A micro-generation manifesto A micro-generation mindsets . 11 the way forward . 12 new build . 12 local heat and power networks . 15 energy services . 16 a micro-generation strategy . 17 Climate Change Programme review. 18 consumer incentives. 19 capital grant schemes. 19 home energy ratings . 19 fiscal measures . 20 export reward . 21 distribution charges . 21 Renewables Obligation Certificates . 21 Winter Fuel Payments . 22 supplier incentives . 23 Energy Efficiency Commitment. 23 Renewables Obligation Certificates . 24 fuel poverty . 24 developer incentives. 24 procurement . 25 planning. 25 Building Regulations. 26 advice and training . 27 annex A – micro-generation technologies . 29 existing technologies . 29 ground source heat pumps. 29 micro-wind turbines . 30 solar thermal . 30 solar photovoltaics (PV) . 31 micro-hydropower turbines . 31 woodfuel boilers . 32 emerging technologies. 32 micro combined heat and power (micro-CHP). 32 stationary fuel cells. 33 annex B – relevant policy agendas by department. 33 annex C – glossary of acronyms. 34 notes . 35 executive summary 3 Over the last year Green Alliance has coordinated the Energy Entrepreneurs network, which brings together a diverse coalition of planners, architects, entrepreneurs and energy experts. We have been making the political case for micro- generation to Ministers, advisers and officials across Government.This report presents our conclusions. We have been able to do this work thanks to generous support from the Ashden Trust. Micro-generation is the generation of low-carbon heat and power by individuals, small businesses and communities to meet their own needs. Bringing energy generation closer to people in this way will forge the vital link between our concern about climate change and our energy consumption in the home. It can help to manifesto A micro-generation overcome the antagonism of a minority towards renewable energy, by bringing every householder and business closer to the solution. Homes with micro- generation are also affordable homes, with low or zero energy costs. And by curbing the rising demand for imported electricity, home energy generation can avert the need for investment in large new power stations and the ageing grid network. However, there is considerable resistance to micro-generation. Current incentives discourage energy suppliers and grid operators from bringing energy generation to the point of demand. Policy-makers are accustomed to an energy system based on big, centralised projects like nuclear or gas-fired power stations. But we now have an opportunity to start to change these mindsets and incentives, and bring micro-generation into the mainstream. The Government has made an important commitment in the Energy Act 2004 to develop a micro-generation strategy by December 2005.This manifesto sets out a broad framework of policies that Green Alliance and the Energy Entrepreneurs Network hope will be addressed in the government strategy. The Government already helps to promote micro-generation through capital grant programmes. However, more decisive policy action has been postponed on the assumption that the technologies will remain too expensive until 2020. Such assumptions are self-fulfilling. Niche products are always expensive. Costs will come down significantly when policies are introduced to increase demand, allowing manufacturers to move from ‘built-to-order’ to mass production.To enable this to happen, Green Alliance and the Energy Entrepreneurs call on the Government to: ● Integrate micro-generation into new build by setting targets in planning and procurement, particularly for the growth areas in the Sustainable Communities Plan, and for the proposed new generation of secondary school buildings. Future rises in carbon emission standards for new build should be clearly signalled to drive “ the Government investment in technological innovation. ● Encourage Local Authorities to plan for community-scale grid has made an networks that supply locally-generated heat and power to new or important existing developments, bypassing the costs and inefficiencies associated with national network use. commitment ● Introduce incentives for energy suppliers to develop energy service contracts that enable existing householders to retrofit to develop a micro-generation.These should allow the upfront costs to be paid micro-generation back through bills over a long period and to be offset by tariffs that reward exported electricity.A strong incentive would come strategy” 4 from a trading scheme in demand reduction certificates, which should be introduced at the earliest opportunity. ● Reform the fiscal framework to enable householders to see micro- generation and energy efficiency as an investment in their property value. Stamp duty rebates for low carbon homes should be introduced to coincide with new home energy ratings. ● Develop the simplest possible procedures for householders and small businesses to apply for grants and grid connection.The public’s interest in home energy generation could be fatally undermined by excessive paperwork requirements. Micro-generation offers an exciting opportunity to involve the public in tackling A micro-generation manifesto A micro-generation climate change and give householders and businesses an incentive to use energy more efficiently.The Government should embrace this opportunity and bring micro- generation into the heart of its Climate Change Programme by adopting these policies. the case for micro-generation The UK Energy White Paper, published in March 2003, established the need to tackle climate change as one of the central aims of energy policy. It set out an ambition for the UK to reduce its emissions of carbon dioxide by 60 per cent over the next fifty years, with clear milestones in the interim.The two main routes to carbon reduction foreseen are an increase in the use of renewable energy, and a step-change in energy efficiency, amounting to a doubling of the historic rate of energy efficiency improvements.These targets are certainly ambitious, and they will not be reached without sustained action by consumers. However, despite the evidence from opinion polls of widespread public support for policies to tackle climate change, the signs are that in practice the majority of consumers remain disengaged. Energy efficiency policy meets with apathy; wind farm proposals meet with antagonism from a vocal minority. Government has yet to confront head-on the challenge of engaging the public, both as citizens and
Recommended publications
  • Consumer Guide: Balancing the Central Heating System

    Consumer Guide: Balancing the Central Heating System

    Consumer Guide: Balancing the central heating system System Balancing Keep your home heating system in good working order. Balancing the heating system Balancing of a heating system is a simple process which can improve operating efficiency, comfort and reduce energy usage in wet central heating systems. Many homeowners are unaware of the merits of system balancing -an intuitive, common sense principle that heating engineers use to make new and existing systems operate more efficiently. Why balance? Balancing of the heating system is the process of optimising the distribution of water through the radiators by adjusting the lockshield valve which equalizes the system pressure so it provides the intended indoor climate at optimum energy efficiency and minimal operating cost. To provide the correct heat output each radiator requires a certain flow known as the design flow. If the flow of water through the radiators is not balanced, the result can be that some radiators can take the bulk of the hot water flow from the boiler, leaving other radiators with little flow. This can affect the boiler efficiency and home comfort conditions as some rooms may be too hot or remain cold. There are also other potential problems. Thermostatic radiator valves with too much flow may not operate properly and can be noisy with water “streaming” noises through the valves, particularly as they start to close when the room temperature increases. What causes an unbalanced system? One cause is radiators removed for decorating and then refitted. This can affect the balance of the whole system. Consequently, to overcome poor circulation and cure “cold radiators” the system pump may be put onto a higher speed or the boiler thermostat put onto a higher temperature setting.
  • Microgeneration Strategy: Progress Report

    Microgeneration Strategy: Progress Report

    MICROGENERATION STRATEGY Progress Report JUNE 2008 Foreword by Malcolm Wicks It is just over two years since The Microgeneration Strategy was launched. Since then climate change and renewables have jumped to the top of the global and political agendas. Consequently, it is more important than ever that reliable microgeneration offers individual householders the chance to play their part in tackling climate change. In March 2006, there was limited knowledge in the UK about the everyday use of microgeneration technologies, such as solar thermal heating, ground source heat pumps, micro wind or solar photovolatics. Much has changed since then. Thousands of people have considered installing these technologies or have examined grants under the Low Carbon Buildings Programme. Many have installed microgeneration and, in doing so, will have helped to reduce their demand for energy, thereby cutting both their CO2 emissions and their utility bills. The Government’s aim in the Strategy was to identify obstacles to creating a sustainable microgeneration market. I am pleased that the majority of the actions have been completed and this report sets out the excellent progress we have made. As a consequence of our work over the last two years, we have benefited from a deeper understanding of how the microgeneration market works and how it can make an important contribution to a 60% reduction in CO2 emissions by 2050. Building an evidence base, for example, from research into consumer behaviour, from tackling planning restrictions and from tracking capital costs, means that we are now in a better position to take forward work on building a sustainable market for microgeneration in the UK.
  • The Role of Micro-Generation Technologies in Alleviating Fuel

    The Role of Micro-Generation Technologies in Alleviating Fuel

    The role of micro -generation technologies in alleviating fuel poverty In a bid to ease the burden of fuel poverty, social housing providers are increasingly turning to micro-generation technologies to help reduce fuel costs. However, with many different types of micro-generation technologies on the market, designers need to know which technologies offer the best chance of alleviating fuel poverty The aim of the study was to determine the The three different types of micro-generation impact of micro-renewable energy technologies technologies were evaluated across three in alleviating fuel poverty. In particular, it sought different case study schemes in South to establish which micro-renewable energy Yorkshire and the West Midlands. Evaluation technologies offered the most cost-effective of the technologies involved monitoring their means of alleviating fuel poverty; and the factors performance, interviewing residents, collecting that influenced the cost-effectiveness of such longitudinal household energy consumption technologies. In doing so we focused on three data and modelling the financial payback of types of technology: ground source heat pumps the systems. (GSHPs); solar thermal hot water (STHW) systems; and solar photovoltaic (PV) systems. Key findings Solar thermal hot water systems The study was conducted by Fin O'Flaherty of STHW systems are not a cost-effective the Centre for Infrastructure Management and measure for alleviating fuel poverty, based on James Pinder, Visiting Fellow, Sheffield Hallam University. the data from our case studies. Although they are relatively cheap to purchase and install (at Background around £3,500 each), the net financial savings This report is based on the findings of a two generated from STHW systems are relatively year study into the role that micro-generation small (approximately £50 per year in this technologies can play in alleviating fuel study), particularly for under-performing poverty in the UK.
  • Energy Saving Trust CE131. Solar Water Heating Systems: Guidance For

    Energy Saving Trust CE131. Solar Water Heating Systems: Guidance For

    CE131 Solar water heating systems – guidance for professionals, conventional indirect models Contents 1 Solar hot water systems 3 1.1 Scope 3 1.2 Introduction 3 1.3 Safety 4 1.4 Risk assessment 5 1.5 Town and country planning 5 2 Design overview 6 2.1 Introduction 6 2.2 Solar domestic hot water (SDHW) energy 6 2.3 SDHW systems 7 3 Design detail 8 3.1 Collectors 8 3.2 Solar primary types 9 3.3 Primary system components 10 3.4 Secondary systems 11 3.5 Pre-heat storage 11 3.6 Auxiliary DHW heating 14 3.7 Combined storage – twin-coil cylinders 15 3.8 Separate storage – two stores 15 3.9 Separate storage – direct DHW heaters 16 3.10 Risk of scalding 16 3.11 Risk of bacteria proliferation 17 3.12 Risk of limescale 17 3.13 Energy conservation 18 3.14 Controls and measurement 20 4 Installation and commissioning 23 4.1 Installation tasks: site survey – technical 23 4.2 Installation tasks: selecting specialist tools 28 4.3 Installation tasks: Initial testing 28 4.4 Commissioning 29 5 Maintenance and documentation 30 6 Appendices 31 6.1 Sample commissioning sheet 31 6.2 Annual solar radiation (kWh/m2) 33 6.3 Sample installation checklist 33 6.4 Further reading 37 6.5 Regulations 38 6.6 Other publications 39 7 Glossary 40 The Energy Saving Trust would like to thank the Solar Trade Association for their advice and assistance in producing this publication. 2 Solar water heating systems – guidance for professionals, conventional indirect models 1 Solar hot water systems 1.1 Scope By following the Energy Saving Trust’s best practice This guide is designed to help installers, specifiers and standards, new build and refurbished housing will commissioning engineers ensure that conventional be more energy efficient – reducing these emissions indirect solar domestic hot water systems (SDHW) and saving energy, money and the environment.
  • Legal Regulation of Aircraft Engine Emissions in the Age of Climate Change

    Legal Regulation of Aircraft Engine Emissions in the Age of Climate Change

    Legal Regulation of Aircraft Engine Emissions in the Age of Climate Change by Jin Liu A thesis submitted to University College London for the degree of Doctor of Philosophy June 2011 Faculty of Laws UCL 1 I, Jin Liu confirm that the work presented in this thesis is my own. Where information has been derived from other sources, I confirm that this has been indicated in the thesis. _____________________________________ Jin Liu 2 Abstract Although the contribution of international civil aviation to climate change seems small (with a global share of just 3.5 percent of emissions of CO 2), the projected growth in air traffic means that it is highly significant. There is thus an urgent need to explore legal regulations for limiting and/or reducing the adverse impacts of aircraft emissions on the environment. This thesis examines the progress which has been made on international aviation emissions abatement and provides an analysis of the reasons for delay. It concludes that the contribution of aviation to climate change is a multi-scalar problem and as such neither conventional top-down international legal regimes, nor any single regulatory instrument can solve it. The research question for this thesis is how to break the deadlock of conventional legal approaches and overcome the barriers to international aviation greenhouse gas emissions abatement. New governance theory provides the theory within which the future of aviation emissions regulation has been explored. Drawing on the scholarly literature on new governance, this thesis argues for a multi-scalar regulatory architecture which simultaneously engages multi-level governance, and a multi-party and multi-instrument approach to the problem.
  • Fair Play? What Are the Odds on Sustainable Gambling?

    Fair Play? What Are the Odds on Sustainable Gambling?

    greenfutures No.83 January 2012 Fair play? What are the odds on sustainable gambling? Meet Paul Polman, the man who wants to reinvent consumption It’s 2032: print some energy and drink the sea Jeremy Rifkin: imagine the internet, only for energy About Us greenfutures Green Futures is the leading international partners the opportunity to place themselves Published by magazine on environmental solutions at the heart of the debate. They enjoy and sustainable futures. It was founded privileged access to the expertise of the by Jonathon Porritt in 1996 to showcase Green Futures team and Forum for the examples of practical and desirable change, Future as a whole, as well as targeted free Editor in Chief MARTIN WRIGHT and is published by Forum for the Future. subscriptions and advertising opportunities. Our readership includes key decision- Managing Editor makers and opinion-formers in business, If you’d like to join us as a partner, please ANNA SIMPSON government, education and non-profit contact Katie Shaw: 020 7324 3660; Editorial and Marketing Coordinator organisations. [email protected] KATIE SHAW We work with a select group of partners who demonstrate a strong commitment Read Green Futures online: Design THE URBAN ANT LTD to sustainable development. In return www.greenfutures.org.uk “Hope and optimism – in spite of present difficulties.” for a contribution towards the cost of This old African saying, made famous by Namibian artist John Muafangejo, seems Founder producing Green Futures, we offer our @GreenFutures pretty apt just now. Even those of us who resolutely see the glass as half full only have JONATHON PORRITT to glance at the news to wonder if, after all, we’re pretty much down to the dregs.
  • Pump up the Volume

    Pump up the Volume

    PUMP UP THE VOLUME BRIngIng down costs and IncReasIng JoBs In the offshoRe wInd sectoR report Clare McNeil, Mark Rowney and Will Straw July 2013 © IPPR 2013 Institute for Public Policy Research AbOUT THE AUTHOrs Clare McNeil is a senior research fellow at IPPR. Mark rowney is a research fellow at IPPR. Will Straw is associate director for climate change, energy and transport at IPPR. AcknOwLEdgMEnTs the authors would like to thank Richard howard and adrian fox of the crown estate, Paul Reynolds from gL garrad hassan, Bruce Valpy from BVg associates, and aram w ood at statkraft for comments on an earlier draft of the report. we are also grateful to our IPPR colleagues graeme cooke, tony dolphin, Rick Muir, nick Pearce and Reg Platt for their comments. all of the views contained in this report are those of the authors and any errors remain ours alone. we owe a debt of gratitude to people at many organisations with whom we spoke over the course of the research. this includes alstom, the carbon trust, climate change capital, the committee on climate change, the crown estate, the danish wind Industry association, the danish embassy in London, dong energy, the energy technologies Institute, the german offshore wind energy foundation, greenpeace, Mainstream Renewable Power, Rwe, siemens UK, tata steel, the tUc, Vestas, and gL garrad hassan. thanks also to a number of civil servants across the government who engaged with us over the course of the project. thanks finally to sian ferguson at ashden trust and to gordon edge, nick Medic, Maf smith and Jennifer webber at RenewableUK for their kind sponsorship of this project and guidance throughout.
  • Passive House Cepheus

    Passive House Cepheus

    PASSIVE HOUSE CEPHEUS • The term passive house (Passivhaus in German) refers to the rigorous, voluntary, Passivhaus standard for energy efficiency in buildings. It results in ultra-low energy buildings that require little energy for space heating or cooling. A similar standard, MINERGIE-P, is used in Switzerland. The standard is not confined only to residential properties; several office buildings, schools, kindergartens and a supermarket have also been constructed to the standard. Passive design is not the attachment or supplement of architectural design, but an integrated design process with the architectural design. Although it is mostly applied to new buildings, it has also been used for refurbishments. Thermogram of a Passive house Explain the difference CEPHEUS - Passive Houses in Europe.mht • Passive Houses require superior design and components with respect to: • insulation • design without thermal brigdes • air tightness • ventilation with heat recovery • comfortwindows und • innovative heating technology • To realise an optimal interaction of all components, an energy balance of the building has to be worked out. And step by step any new design may be improved to meat Passive House sta HOW? WALL FLOOR WALL WINDOW Space heating requirement • By achieving the Passivhaus standards, qualified buildings are able to dispense with conventional heating systems. While this is an underlying objective of the Passivhaus standard, some type of heating will still be required and most Passivhaus buildings do include a system to provide supplemental space heating. This is normally distributed through the low- volume heat recovery ventilation system that is required to maintain air quality, rather than by a conventional hydronic or high-volume forced-air heating system, as described in the space heating section below.
  • Experience the Calming Beauty of RSF Fireplaces and the Real Wood Fire

    Experience the Calming Beauty of RSF Fireplaces and the Real Wood Fire

    2021 Experience the calming beauty of RSF fireplaces and the real wood fire. 1 “Just like Sunday dinner Nothing can replace the warm embrace of a real wood doesn’t come out of fire. A wood fire gives off a special kind of warmth that a can and fine wine penetrates and soothes. It’s true that burning wood in doesn’t come out of a your fireplace isn’t as convenient as burning gas. But box, a real fire doesn’t like all of life’s best things, that little extra effort makes come out of a pipeline.” a world of difference. Just like Sunday dinner doesn’t come out of a can and fine wine doesn’t come out of a box, a real fire doesn’t come out of a pipeline. If it’s a real fire…it’s wood. And if it’s a clean burning efficient wood fire… it’s probably an RSF fireplace. So come in, relax, kick off your shoes and leave your frantic life at the door. Experience the calming beauty of RSF fireplaces and the real wood fire. RSF is a proud supporting member of: 2 Contents 4 The RSF Built-in Advantage 5 The RSF Comfort Advantage 6 The RSF Smart BurnRate Air Control 7 Catalytic or Non-Catalytic Series: Choosing What’s Right for You 8 Focus 3600 Fireplace 10 Pearl 3600 Fireplace 14 Focus SBR Fireplace 16 Delta Fusion Fireplace 18 Opel Keystone Catalytic Fireplace 20 Opel 2 Plus Catalytic Fireplace 22 Opel 3 Plus Catalytic Fireplace 24 Focus ST Fireplace 26 Chimney Safety and Performance 26 RSF Convenience 27 RSF Heat Distribution 29 RSF Performance 29 RSF Accessories 30 RSF Specifications 31 Burning Wood in an RSF Fireplace is Good for the Environment 3 THE RSF THE RSF BUILT-IN ADVANTAGE COMFORT ADVANTAGE A fireplace is one of the most sought after features in a home and will increase its resale value more than a freestanding wood stove.
  • Underfloor Heating Systems :///Users//Downloads/ LDS7 FINAL.Pdf

    Underfloor Heating Systems :///Users//Downloads/ LDS7 FINAL.Pdf

    CI/SfB (53) First Issue April 2019 Underfloor Heating Systems :///Users//Downloads/ LDS7_FINAL.pdf SUPERIOR HEATING SOLUTIONS SINCE 1980 2 Firebird Envirofloor™ Underfloor Heating Systems An economical and environmentally friendly alternative to traditional heating and hot water systems. Firebird Products Ltd are market-leading manufacturers of heating products with a proven track record built on the global supply of heating systems. Established in Ireland in 1980, the Firebird name has become synonymous with performance, quality and innovative design. At the forefront of technology, Firebird are committed to providing cost-effective, energy-efficient heating solutions that not only meet, but easily exceed today’s stringent legislative requirements. Historically an oil-fired boiler manufacturer, the product range has been expanded to include air source heat pumps, biomass boilers & stoves, solar thermal systems and underfloor heating systems. @firebirdboilers www.firebird.uk.com 3 Underfloor Heating Systems Underfloor heating is not a new concept and dates back to Roman times when hot gasses from a fire or furnace passed through a network of flues under the floor of the building. From the 1960’s onwards, various modern systems have been introduced which include expensive to run electric underfloor heating and steel pipes, which had expensive material costs. In 1975 plastic underfloor heating pipe was introduced into the UK which greatly reduced the material cost and allowed wider access to this highly efficient way of heating. Suitable for both new build and renovation projects, Envirofloor underfloor heating systems are ‘wet’ underfloor heating is the most efficient way suitable for a wide range of ground and upper to provide space heating as it is up to 25% more floor constructions.
  • New Low-Temperature Central Heating System Integrated with Industrial Exhausted Heat Using Distributed Electric Compression Heat Pumps for Higher Energy Efficiency

    New Low-Temperature Central Heating System Integrated with Industrial Exhausted Heat Using Distributed Electric Compression Heat Pumps for Higher Energy Efficiency

    energies Article New Low-Temperature Central Heating System Integrated with Industrial Exhausted Heat Using Distributed Electric Compression Heat Pumps for Higher Energy Efficiency Fangtian Sun 1,2,*, Yonghua Xie 1, Svend Svendsen 2 and Lin Fu 3 1 Beijing Research Center of Sustainable Energy and Buildings, Beijing University of Civil Engineering and Architecture, Beijing 100044, China; [email protected] 2 Department of Civil Engineering, Technical University of Denmark, 2800 Lyngby, Denmark; [email protected] 3 Department of Building Science, Tsinghua University, Beijing 100084, China; [email protected] * Correspondence: [email protected]; Tel.: +86-010-6832-2133; Fax: +86-010-8836-1680 Received: 23 October 2020; Accepted: 9 December 2020; Published: 14 December 2020 Abstract: Industrial exhausted heat can be used as the heat source of central heating for higher energy efficiency. To recover more industrial exhausted heat, a new low-temperature central heating system integrated with industrial exhausted heat using distributed electric compression heat pumps is put forward and analyzed from the aspect of thermodynamics and economics. The roles played by the distributed electric compression heat pumps in improving both thermal performance and financial benefit of the central heating system integrated with industrial exhausted heat are greater than those by the centralized electric compression heat pumps. The proposed low-temperature central heating system has higher energy efficiency, better financial benefit, and longer economical distance of transmitting exhausted heat, and thus, its configuration is optimal. For the proposed low-temperature central heating system, the annual coefficient of performance, annual product exergy efficiency, heating cost, and payback period are about 22.2, 59.4%, 42.83 ¥/GJ, and 6.2 years, respectively, when the distance of transmitting exhausted heat and the price of exhausted heat are 15 km and 15 ¥/GJ, respectively.
  • Warmth, Efficiency, and Total Peace of Mind. Combi & Heating Boilers

    Warmth, Efficiency, and Total Peace of Mind. Combi & Heating Boilers

    Warmth, efficiency, and total peace of mind. Combi & Heating Boilers Self-Monitoring Self-Adjusting Self-Commissioning High Efficiency, Wall Mounted, Modulating Condensing Boilers with ”THINK Intelligence Within.” www.baxiboilers.com PN 240012218 Rev. [12/05/19] Why Choose Baxi? In North America, Baxi’s combination heating and domestic hot water boilers were first-to-market, reliably heating homes for almost 2 decades. 98% of customers recommend Baxi Over 8 million boilers produced Best in class ENERGY STAR® ratings at 95% AFUE provide lower utility bills and reduced carbon emissions. Why Choose a Combi Boiler? Combi boilers provide central heating and give you an endless supply of hot water. This means they’re economical to run, as hot water is only produced when you need it. What’s more, there’s no need for a separate water heater. Combi boilers are compact and wall-mounted, saving you valuable space. 150 Plus Years of Founder Richard Baxendale 1866 opened the doors to his new company. The Bermuda, Baxi’s most famous gas-fired boiler was 1966 launched. Celebrated 100th anniversary. A series of acquisitions took 1984 place leading to the ownership of the Bassano del Grappa ++ plant in Italy. Baxi introduced the first high efficiency combi boiler to 2000 North America. The award-winning Baxi #1 2006 Duo-tec Combi high efficiency boiler was launched. Baxi D+R Baxi merged with De Dietrich and Remeha to form BDR 2010 BDR THERMEA Thermea Group. BDR Thermea Group opens 2018 Baxi operations in North America. Innovative Technology Baxi’s pioneering THINK combustion management system provides the installer with the easiest boiler to commission and operate.