DOCSLIB.ORG

Classeur Afcem-2016.Xlsx

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Classeur Afcem-2016.Xlsx Taille Répertoire (Ko) Acronymes - dictionnaires 6 145_93 Antennas Terms.pdf 155 7 2008-aap15 Glossaire OTAN.pdf 1211 8 315_75 Graphic Symbols.pdf 1642 9 315A_86 Graphic Symbols.pdf 2255 10 60050-351 {Ed2.0}98 Vocabulaire.pdf 6422 11 91a_91 Logic Symbols.pdf 1727 12 AAP-42 Glossaire OTAN Normalisation.pdf 224 13 AAP-6_13 Glossaire OTAN.pdf 1911 14 Abbreviations & Acronyms.pdf 84 15 Abbreviations Dictionary.pdf 8155 16 Acp167- Glossary.pdf 335 17 Acronymes GPSM.pdf 11 18 Acronymes hyper.pdf 47 19 Acronyms & Abbreviations.pdf 179 20 Acronyms Glossary.pdf 59 21 Acronyms Initialisms & Abbreviations.pdf 474 22 Acronyms.pdf 626 23 Acronyms-2008.pdf 40 24 ADV1.0_2014 ESD Glossary.pdf 256 25 Advanced Access Networks.pdf 653 26 Aeronautics glosary.pdf 64 27 Air Force Compendium.pdf 1123 28 AOP-38 Ed4-06 Glossaire explosifs.pdf 1094 29 Assurance Information Glossary.pdf 464 30 Audio Dictionary.pdf 357 31 Author.pdf 160 32 Ballistic Missile Defense glossary.pdf 650 33 BBC202 Terminology for Loudness & Level.pdf 132 34 BICSI Acronyms.pdf 97 35 BROADBAND.pdf 200 36 Broadcast acronyms.pdf 195 37 Cable & Wire Glossary.pdf 429 38 Cable glossary.pdf 460 39 Communications-Electronics Terms.pdf 1425 40 Définitions nucléaires.pdf 201 41 DMSMS Acronym Dictionary.pdf 72 42 Draft.pdf 811 43 Electrical Engineering Dictionary.pdf 3698 44 Electronic Glossary ACP 167i.pdf 1415 45 EM 1110-2-2907 Glossary.pdf 175 46 EMI EMC Encyclopedia.pdf 181 47 ESD ADV1.0_2014 ESD Glossary.pdf 247 48 FED-STD-1037C.pdf 5352 49 Glossaire OTAN AAP15-2007.pdf 990 50 Glossary, Acronyms & Abbreviations.pdf 423 51 Guide terminologie.pdf 773 52 HDBK-XXXX-05 Glossary.pdf 441 53 IEC 60417 snapshot 2005.pdf 1168 54 Indian Standard - Automatic Control Vocabulary.pdf 998 55 Indian Standard - Electrical & Magnetic Vocabulary.pdf 773 56 Indian standard - Electroheat Vocabulary.pdf 1295 57 Indian Standard - Lighting & LEDs Definitions.pdf 375 58 Indian Standard - Physics Vocabulary.pdf 4270 59 Indian Standard - Solar PV Vocabulary.pdf 480 60 Information Assurance Dictionary.pdf 2533 61 Internet Security Glossary.pdf 821 62 ISO 7000 {Ed3}04.pdf 4685 63 ISO-DIS 13943 Fire Safety Vocabulary.pdf 281 64 JESD77D_12 Terms Definitions & Symbols.pdf 1277 65 JESD88E_13 Solid-State Dictionary.pdf 1342 66 JESD89 Cosmic Ray-Induced Soft Errors.pdf 320 67 JESD99C_13 Terms Definitions and Symbols.pdf 578 68 Lexique mécanique français-anglais.pdf 437 69 Lexique réseaux & télécom.pdf 5335 70 Military and Associated Terms.pdf 2008 71 NATO Glossary English French.pdf 728 72 PEARL2.1.pdf 797 73 PLL & Clocking Glossary.pdf 101 74 SEMI Compilation of Terms.pdf 1448 75 Sigles divers.pdf 2434 76 SPD definitions.pdf 113 77 Technical Report DSL Forum.pdf 232 78 Technology.pdf 351 79 Termes semi-conducteurs.pdf 130 80 WCH_19.pdf 272 81 Wireless Glossary.pdf 426 82 Acronymes - dictionnaires/IEC Symboles graphiques 83 60417 Snapshot 01-2005.pdf 1168 84 IEC 60417_03.pdf 911 85 IEC 60417_05.pdf 1168 86 IEC 60617 database snapshot_05.pdf 4140 87 IEC Symbols_CONDUCTORS.pdf 55 88 IEC Symbols_ELECTRICAL_ENERGY.pdf 59 89 IEC Symbols_GENERAL_SYMBOLS.pdf 108 90 IEC Symbols_PASSIVE_COMPONENTS.pdf 21 91 IEC Symbols_SEMICONDUCTORS.pdf 28 92 IEC Symbols_TEMPERATURE_SENSITIVE_SWITCHES.pdf 123 93 sdyz001a.pdf 142 94 Acronymes - dictionnaires/Vocabulaire CEM selon CEI 60050 95 IEC 60050 - (electromagnetic) compatibility level.pdf 61 96 IEC 60050 - (electromagnetic) compatibility margin.pdf 60 97 IEC 60050 - (electromagnetic) disturbance level.pdf 54 98 IEC 60050 - (electromagnetic) emission.pdf 55 99 IEC 60050 - (electromagnetic) radiation.pdf 56 100 IEC 60050 - (electromagnetic) susceptibility.pdf 57 101 IEC 60050 - (radiation) test site.pdf 54 102 IEC 60050 - (total) harmonic factor.pdf 58 103 IEC 60050 - Absorbing clamp.pdf 53 104 IEC 60050 - adjacent channel selectivity.pdf 59 105 IEC 60050 - appliance impedance.pdf 53 106 IEC 60050 - artificial hand.pdf 51 107 IEC 60050 - artificial mains network.pdf 62 108 IEC 60050 - asymmetrical control (single phase).pdf 58 109 IEC 60050 - asymmetrical terminal voltage.pdf 58 110 IEC 60050 - average detector.pdf 56 111 IEC 60050 - balun.pdf 49 112 IEC 60050 - bandwidth (of a device).pdf 57 113 IEC 60050 - bandwidth (of an emission or signal).pdf 60 114 IEC 60050 - broadband device.pdf 54 115 IEC 60050 - broadband disturbance.pdf 54 116 IEC 60050 - burst (of pulses or oscillations).pdf 57 117 IEC 60050 - burst firing control.pdf 57 118 IEC 60050 - cabinet radiation.pdf 54 119 IEC 60050 - click rate.pdf 51 120 IEC 60050 - click.pdf 48 121 IEC 60050 - common mode conversion.pdf 54 122 IEC 60050 - common mode current.pdf 54 123 IEC 60050 - common mode impedance.pdf 52 124 IEC 60050 - common mode voltage.pdf 54 125 IEC 60050 - commutation notch.pdf 52 126 IEC 60050 - conducted disturbance.pdf 53 127 IEC 60050 - continuous disturbance.pdf 53 128 IEC 60050 - continuous noise.pdf 53 129 IEC 60050 - coupling factor.pdf 54 130 IEC 60050 - coupling path.pdf 52 131 IEC 60050 - current probe.pdf 52 132 IEC 60050 - cycle of operation.pdf 52 133 IEC 60050 - cycle.pdf 48 134 IEC 60050 - cyclic on-off switching control.pdf 55 135 IEC 60050 - damped oscillatory wave.pdf 54 136 IEC 60050 - degradation (of performance).pdf 55 137 IEC 60050 - delay angle.pdf 54 138 IEC 60050 - delta network.pdf 53 139 IEC 60050 - desensitization.pdf 52 140 IEC 60050 - differential mode current.pdf 58 141 IEC 60050 - differential mode voltage.pdf 57 142 IEC 60050 - discontinuous disturbance.pdf 55 143 IEC 60050 - discontinuous interference.pdf 55 144 IEC 60050 - disturbance field strength.pdf 57 145 IEC 60050 - disturbance power.pdf 52 146 IEC 60050 - disturbance suppression.pdf 54 147 IEC 60050 - disturbance voltage.pdf 52 148 IEC 60050 - dummy lamp.pdf 50 149 IEC 60050 - duration of a voltage change.pdf 58 150 IEC 60050 - earth-coupled interference.pdf 56 151 IEC 60050 - earthing inductor.pdf 53 152 IEC 60050 - effective radiated power.pdf 65 153 IEC 60050 - effective selectivity.pdf 55 154 IEC 60050 - electrical charge time constant (of a detector).pdf 61 155 IEC 60050 - electromagnetic compatibility.pdf 59 156 IEC 60050 - electromagnetic disturbance.pdf 54 157 IEC 60050 - electromagnetic environment.pdf 62 158 IEC 60050 - electromagnetic interference.pdf 62 159 IEC 60050 - electromagnetic noise.pdf 54 160 IEC 60050 - electromagnetic screen.pdf 55 161 IEC 60050 - electrostatic discharge.pdf 57 162 IEC 60050 - emission (in radiocommunication).pdf 60 163 IEC 60050 - emission level (of a disturbing source).pdf 58 164 IEC 60050 - emission limit (from a disturbing source).pdf 61 165 IEC 60050 - emission margin.pdf 53 166 IEC 60050 - emitter (of electromagnetic disturbance).pdf 59 167 IEC 60050 - external immunity.pdf 54 168 IEC 60050 - flicker.pdf 49 169 IEC 60050 - flickermeter.pdf 52 170 IEC 60050 - fundamental (component).pdf 53 171 IEC 60050 - fundamental factor.pdf 52 172 IEC 60050 - fusion frequency.pdf 60 173 IEC 60050 - generalized phase control.pdf 55 174 IEC 60050 - harmonic (component).pdf 54 175 IEC 60050 - harmonic content.pdf 55 176 IEC 60050 - harmonic number.pdf 54 177 IEC 60050 - Ievel (of a time varying quantity).pdf 55 178 IEC 60050 - Iimit of disturbance.pdf 54 179 IEC 60050 - Iimit of interference.pdf 56 180 IEC 60050 - image rejection ratio.pdf 60 181 IEC 60050 - immunity (to a disturbance).pdf 57 182 IEC 60050 - immunity level.pdf 53 183 IEC 60050 - immunity limit.pdf 54 184 IEC 60050 - immunity margin.pdf 53 185 IEC 60050 - immunity test level.pdf 57 186 IEC 60050 - impulse.pdf 49 187 IEC 60050 - impulsive disturbance.pdf 53 188 IEC 60050 - impulsive noise.pdf 52 189 IEC 60050 - information technology equipment.pdf 62 190 IEC 60050 - input power control.pdf 55 191 IEC 60050 - installation wiring impedance.pdf 56 192 IEC 60050 - interference suppression.pdf 52 193 IEC 60050 - interfering signal.pdf 53 194 IEC 60050 - intermediate frequency rejection ratio.pdf 60 195 IEC 60050 - intermodulation.pdf 53 196 IEC 60050 - internal immunity.pdf 53 197 IEC 60050 - Inter-system interference.pdf 56 198 IEC 60050 - Intra-system interference.pdf 55 199 IEC 60050 - ISM (qualifier).pdf 53 200 IEC 60050 - ISM frequency band.pdf 54 201 IEC 60050 - long-term flicker indicator.pdf 62 202 IEC 60050 - magnitude of a voltage fluctuation.pdf 57 203 IEC 60050 - mains decoupling factor.pdf 60 204 IEC 60050 - mains immunity.pdf 56 205 IEC 60050 - mains-borne disturbance.pdf 58 206 IEC 60050 - man-made noise.pdf 53 207 IEC 60050 - mechanical time constant.pdf 68 208 IEC 60050 - multicycle control (by half-cycles).pdf 60 209 IEC 60050 - narrowband device.pdf 48 210 IEC 60050 - narrowband disturbance.pdf 54 211 IEC 60050 - natural noise.pdf 51 212 IEC 60050 - nth harmonic ratio.pdf 54 213 IEC 60050 - out-of-band emission.pdf 54 214 IEC 60050 - output power control.pdf 55 215 IEC 60050 - overload factor (of a receiver).pdf 61 216 IEC 60050 - parasitic oscillation.pdf 52 217 IEC 60050 - peak detector.pdf 58 218 IEC 60050 - peak-ripple factor.pdf 57 219 IEC 60050 - phase control.pdf 53 220 IEC 60050 - point of common coupling.pdf 60 221 IEC 60050 - professional equipment.pdf 53 222 IEC 60050 - program (of a control system).pdf 55 223 IEC 60050 - protection ratio.pdf 51 224 IEC 60050 - pulsating.pdf 49 225 IEC 60050 - pulse response characteristic.pdf 67 226 IEC 60050 - pulse.pdf 48 227 IEC 60050 - quasi-impulsive noise.pdf 54 228 IEC 60050 - quasi-peak detector.pdf 60 229 IEC 60050 - quasi-peak voltmeter.pdf 60 230 IEC 60050 - r.m.s ripple factor.pdf 58 231 IEC 60050 - radiated disturbance.pdf 54 232 IEC 60050 - radio (frequency)
Load more

Recommended publications
  • Věstníku ÚNMZ Č. 12/2017
    Ročník 2017 Úřadu pro technickou normalizaci, metrologii a státní zkušebnictví ČÍSLO 12 Zveřejněno dne 8. prosince 2017 OBSAH: ČÁST A – OZNÁMENÍ Strana: Oddíl 1. Harmonizované normy a určené normy ÚNMZ č. 115/17 o určených normách 2 ÚNMZ č. 116/17 o určených normách k nařízení vlády č. 120/2016 Sb. 3 Oddíl 2. České technické normy ÚNMZ č. 117/17 o vydání ČSN, jejich změn, oprav a zrušení 60 ÚNMZ č. 118/17 o schválení evropských norem k přímému používání jako ČSN 72 ÚNMZ č. 119/17 o zahájení zpracování návrhů českých technických norem 81 ÚNMZ č. 120/17 o veřejném projednání návrhů evropských norem CEN 110 ÚNMZ č. 121/17 o veřejném projednání návrhů evropských norem CENELEC 115 ÚNMZ č. 122/17 o veřejném projednání návrhů evropských telekomunikačních norem 117 Oddíl 3. Metrologie Oddíl 4. Autorizace Oddíl 5. Akreditace ČIA, č. 12/17 o udělení, pozastavení a zrušení akreditaci 119 Oddíl 6. Ostatní oznámení MO ČR č. 12/17 o vydání seznamu nových standardizačních dohod NATO, vydání doplňků ke standardizačním dohodám, o zrušení standardizačních dohod a přistoupení ke standardizačním dohodám 131 ČÁST B – INFORMACE ÚNMZ č. 12/17 Informačního střediska WTO o notifikacích Členů Dohody o technických překážkách obchodu (TBT), která je nedílnou součástí Dohody o zřízení Světové obchodní organizace (WTO) 138 ČÁST C – SDĚLENÍ ÚNMZ o ukončení platnosti norem 143 ČAS, p.o. ceník zboží a služeb poskytovaných Českou agenturou pro standardizaci, p. o. 144 Věstník č. 12/2017 ČÁST A – OZNÁMENÍ Oddíl 1. Harmonizované normy a určené normy OZNÁMENÍ č. 115/17 Úřadu pro technickou normalizaci, metrologii a státní zkušebnictví o určených normách Úřad pro technickou normalizaci, metrologii a státní zkušebnictví oznamuje podle § 4a odst.
    [Show full text]
  • High Voltage Transient Protection for Automotive
    High voltage transient protection for automotive Comparison of three different protection circuits for low power devices Viktor Lindholm Thesis for Master of Science in Engineering Main field of study: Electrical Engineering Credits: 300 Semester/Year: 2019 Supervisor: Kent Bertilsson Examiner: Mattias O´Nils Course code/registration number: EL039A High voltage transient protection Abstract for automotive 2019-06-27 Viktor Lindholm Abstract Electronics for automotive needs to be able to handle different situations that can occur on the power line, such as high voltage transients. ISO- 16750 and ISO-7637 describes different pulses and tests a system needs to be able to handle. This report compares three different protection circuits that can output +5V and +12V built for low power devices. The circuits use different techniques for protection, one that uses TVS diodes, another that uses a voltage regulator IC with built in protection. The last protec- tion uses P-channel MOSFET’s for protection. The circuits are compared against protection, price and leakage current. The most relevant transi- ents to test a system against are decided to be pulse1, pulse 2a and load dump. A pulse generator consisting of a pulse shaping network and a common drain amplifier is used to create the test pulses. The result shows that all the circuits could protect against pulse 2a and load dump. How- ever, all the circuits did fail against pulse 1 due to an undersized diode for negative voltage protection. The leakage current did not exceed 4µA for two of the circuits in the temperature interval of -40°C to +100°C.
    [Show full text]
  • CAN Outdoor Family Robust
    Series 09 CAN Outdoor Family Robust. Durable. Reliable. www.eao.com Series 09 CAN Outdoor Keypad Family CAN Modules – Robust. Durable. Reliable. Designed for E1 applications with functional safety and Advantages. CAN bus integration – The robust control units with flexible Individual 4-segment and RGB halo ring illumination Designed for functional safety: ISO 26262 and ISO 13849 illumination are ideally suited for use in heavy duty and Intelligent HMIs with CAN bus integration Robust, innovative, ergonomic design sealed up to IP67 protection special vehicles applications. Interchangeable ISO 7000 range of symbols or customised symbols Series 09 CAN Outdoor Keypad Family offers high reliability: and robust clip-in or screw-in mounting allows easy, flexible Typical applications Ambient conditions The modules are designed for E1 applications and functional installation, either vertically or horizontally. These high- Special vehicles Operating temperature: – 40 °C … + 85 °C safety in accordance with ISO 26262 ASIL B and EN ISO quality devices also offer excellent tactile feedback, and including fire-fighting vehicles, road Storage temperature: – 40 °C … + 85 °C 13849 PLD as well as an intelligent control with CAN bus are clearly visible in daylight and at night thanks to the sweepers, cleaning vehicles, refuse integration. The robust, modular design with sealing levels powerful RGB LED halo and LED symbol illumination. trucks, snow removers and groomers Protection degree of up to IP67 and the ability to customise and interchange Attractive and configurable 4-segment halo button illumina- Heavy duty vehicles IP67 protection (front and rear side) the keypad legends make these high-quality devices ideally tion is integrated as standard.
    [Show full text]
  • Final Program Pdf Version
    2021 JOINT IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, SIGNAL & POWER INTEGRITY, AND EMC EUROPE ENTER THE VIRTUAL PLATFORM AT: www.engagez.net/emc-sipi2021 CHAIRMAN’S MESSAGE TABLE OF CONTENTS A LETTER FROM 2021 GENERAL CHAIR, Chairman’s Message 2 ALISTAIR DUFFY & BRUCE ARCHAMBEAULT Message from the co-chairs Thank You to Our Sponsors 4 Twelve months ago, I think we all genuinely believed that we would have met up this year in either or Week 1 Schedule At A Glance 6 both of Raleigh and Glasgow. It was virtually inconceivable that we would be in the position of needing to move our two conferences this year to a virtual platform. For those who attended the virtual EMC Clayton R Paul Global University 7 Europe last year, who would have thought that they would not be heading to Glasgow with its rich history and culture? However, as the phrase goes, “we are where we are”. Week 2 Schedule At A Glance: 2-6 Aug 8 A “thank you” is needed to all the authors and presenters because rather than the Joint IEEE Technical Program 12 BRINGING International Symposium on EMC + SIPI and EMC Europe being a “poor relative” of the event that COMPATIBILITY had been planned, people have really risen to the challenge and delivered a program that is a Week 3 Schedule At A Glance: 9-13 Aug 58 TO ENGINEERING virtual landmark! Usually, a Chairman’s message might tell you what is in the program but we will Keynote Speaker Presentation 60 INNOVATIONS just ask you to browse through the flipbook final program and see for yourselves.
    [Show full text]
  • TTP Bus Communication Speed for MFM Physical Layer
    High-Performance Safety Controller – HY-TTC 590 General Description Features HY-TTC 590 is a high-end electronic control solution for the automotive CPU Core industry, suitable for a wide range of applications. The core of the • 32-Bit TI TMS570, ARM cortex-R4F based controller is the very powerful TMS570 CPU designed for use in • Dual-core lockstep CPU and memory protection for demanding, safety-critical and complex automotive and transportation safety-relevant applications scenarios. The HY-TTC 590 fulfills safety requirements up to ASIL C (ISO • 180 MHz, 298 DMIPS, Floating-Point Unit 26262*) / SIL 2 (IEC 61508) / PL d (ISO 13849) and AgPL d (ISO 25119). • 3 MB int. Flash, 256 kB int. RAM The HY-TTC 590 is part of a complete and compatible product family and • 32 MB ext. Flash, 2 MB ext. RAM, 32 kB ext. FRAM is protected by a rugged automotive housing. • Safety Companion CPU Specifications Interfaces • 6 x CAN 50 kbit/s up to 1 Mbit/s Parameter Unit • 1 x CAN ISOBUS ECU dimensions 231.3 x 204.9 x 38.8 mm • 4 x CAN bus termination, configurable via connector pins Dimensions for minimum 315.3 x 204.9 x 38.8 mm • 1 x 100BASE-T1 BroadR-Reach® connector release clearance • 1 x LIN, 1 x RS232 Weight 1,200 g • 1 x Real Time Clock Connector 154 pins Outputs Operating temperature -40 to +85 °C • 36 x PWM OUT or digital OUT, up to 4 A, high side, with high Operating altitude 0 to 4,000 m side current measurement Supply voltage 8 to 32 V 8 of these outputs can be alternatively used as Peak supply voltage 45 Vmax digital timer IN (0.1 Hz - 10
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 1
    Hrvatski zavod za norme Oglasnik za normativne dokumente 1/2017 siječanj, 2017. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije 1.1 Hrvatske norme....................................................................................................................A3 1.2 Nacrti hrvatskih norma.......................................................................................................... 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku.............................................................. A29 1.4 Povučene hrvatske norme.................................................................................................... A48 1.5 Povučeni nacrti hrvatskih norma........................................................................................... 1.6 Ispravci hrvatskih norma....................................................................................................... A88 1.7 Naslovi objavljenih hrvatskih norma na hrvatskome jeziku..................................................
    [Show full text]
  • ISO Update Supplement to Isofocus
    ISO Update Supplement to ISOfocus July 2021 International Standards in process ISO/CD Road vehicles — Environmental conditions and 16750-4 testing for electrical and electronic equipment An International Standard is the result of an agreement between — Part 4: Climatic loads the member bodies of ISO. A first important step towards an Interna- ISO/CD Road vehicles — Environmental conditions and tional Standard takes the form of a committee draft (CD) - this is cir- 16750-5 testing for electrical and electronic equipment culated for study within an ISO technical committee. When consensus — Part 5: Chemical loads has been reached within the technical committee, the document is TC 23 Tractors and machinery for agriculture sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the and forestry member bodies casting a vote. A confirmation vote is subsequently ISO/CD 11471 Agricultural tractors and machinery — Cod- carried out on a final draft International Standard (FDIS), the approval ing of remote hydraulic power services and criteria remaining the same. controls ISO/CD Tractors and machinery for agriculture and 11783-7 forestry — Serial control and communications data network — Part 7: Implement messages application layer ISO/CD Agricultural machinery and tractors — Safety 18497-1 of partially automated, semi-autonomous and autonomous machinery — Part 1: Machine design principles and vocabulary CD registered TC 24 Particle characterization including sieving Period from 01 June to 01 July 2021 ISO/DTS 4807 Reference materials for particle size measure- ment - Specification of requirements These documents are currently under consideration in the technical committee.
    [Show full text]
  • BODAS Controller RC18-12 Series 40 RC27-18 Series 40
    RE 95208/2021-08-09 Replaces: 2021-04-06 BODAS Controller RC18-12 series 40 RC27-18 series 40 ▶ For closed- and open-loop control of hydraulic components Features Contents ▶ 32-bit multi-core processor with 300 MHz clock Ordering code 2 frequency and hardware safety module (HSM) Optional accessories 2 ▶ Suitable for safety-relevant applications Description 3 ▶ Component of the BODAS system for mobile Block circuit diagram 5 applications Technical data 6 ▶ Robust and compact design meeting specifications for Qualification testing 8 mobile applications Connection diagram 13 ▶ High Electromagnetic Compatibility (EMC) Overview of functions 15 ▶ Inputs and outputs with fault detection Dimensions 25 ▶ Inhibit logic for safety-relevant outputs Installation position 26 ▶ Pulse-Width-Modulated (PWM) solenoid currents Mating connector 27 ▶ Closed-loop control of solenoid currents, Safety instructions 30 i.e. not dependent on supply voltage and temperature Main components ▶ 30 or 45 power outputs, 18 or 27 of which are current-controlled ▶ 8 low power switch outputs ▶ 58 multi-functional Inputs ▶ Program sequence monitoring with watchdog ▶ Four independent sensor voltage supplies ▶ Four independent CAN bus interfaces (one of which useable for ISOBUS and two with wake-up function) ▶ One LIN master interface RE 95208/2021-08-09, Bosch Rexroth AG 2 RC series 40 | BODAS Controller Ordering code Ordering code Optional accessories ▶ BODAS-service software 01 02 03 04 The windows-based PC software BODAS-service 4.x RC / 40 (see data sheet 95087) is used for displaying functions, Type errors and system variables as well as for setting 01 BODAS controller RC parameters via a PC.
    [Show full text]
  • Service Contract (Lecom029)
    SERVICE CONTRACT (LECOM029) APPENDIX A TO STATEMENT OF WORK (SOW) DES LE PfMO PEng Eng - Technical Publications Portfolio Review As At 11 June 2014 11 June 2014 DES LE PfMO PEng Eng - Technical Publications Portfolio Review Summary This review covers 96 publications from the DES LE PEng Eng Technical Publications Portfolio. All of the standards were reviewed by experts in the various fields covered across the 96 documents. The documents’ content, spelling & grammar as well as the currency of any other standards, organisations or materiel referred to, were all taken into account during the reviews. In a few cases, the need for the document at all was questioned, these were: • AESP 0200-A-201-013 – Welding Cutting and Brazing • AESP 0200-A-207-013 – Wet Abrasive Cleaning Process • AESP 0200-A-210-013 – Repair of Threaded Holes by Insert • AESP 0200-A-232-013 – Timber Selection, Preservation and Finishing • AESP 0200-A-237-013 – Fibre Optic Technology • AESP 2610-A-409-8 Pneumatic Tyres and Tubes Associated Road Wheels • Def Stan 34-1 – Flux, Soldering (Zinc Chloride Solution) • Def Stan 68-199 – Windscreen Wash Liquid Concentrate It is recommended that the usage and necessity for these documents is investigated Additionally, it is noted that all Def Stans feature the following preliminary paragraph: “3.3 In consideration of clause 3.2 above, users shall be fully aware of the issue and amendment status of all normative references, particularly when forming part of an Invitation to Tender or contract. Responsibility for the correct application of standards rests with users.” This could be overcome by not making specific reference to issue levels and years of release in the main body of the document.
    [Show full text]
  • Iso-7637-22011E, Standard
    INTERNATIONAL ISO STANDARD 7637-2 Third edition 2011-03-01 Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only Véhicules routiers — Perturbations électriques par conduction et par couplage — Partie 2: Perturbations électriques transitoires par conduction uniquement le long des lignes d'alimentation Reference number ISO 7637-2:2011(E) © ISO 2011 ISO 7637-2:2011(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT © ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester.
    [Show full text]
  • Announcer July
    Vol. XLII JULY – DECEMBER 2016 NO. 2 ISSN 0856 - 0374 20 29 34 inside stories Members of the Zanzibar House of Representatives Committee for Finance, Business and Agriculture in a group photo with the TBS Management during their familiarization visit at TBS headquarters VISION A model of excellence in standardization and quality assurance services by 2025. To promote standardization and quality assurance in industry and commerce MISSION through standards development, quality assurance, metrology and testing services for sustainable socio-economic development. Tanzania Bureau of Standards (TBS) endeavours, as mandated, to QUALITY deliver quality products that include standards and quality assurance POLICY services by meeting and even exceeding customers’ requirements so as to retain their loyalty. TBS provides resources and continually improves her processes to ensure that employees are capable of consistently producing quality products at the right time. CORE VALUES i. Customer focus We deliver services to meet consumers’ expectations. ii. Quality culture We employ the best available practices and professional values in performing our duties. iii. Transparency We exercise openness, impartiality, accurately and promptly share information with all stakeholders. iv. Integrity We constantly demonstrate impartiality, fairness and honesty while upholding the highest ethical standards. v. Team work We work together through concerted efforts to achieve our corporate goals. CONTENTS EDITORIAL 4 TBS role in industrialization is beyond descriptions NEWS IN BRIEF 6 EAC countries strive to phase out lead in paints 7 TBS grants 96 licences, certificates to manufacturers 7 TBS urged to strengthen public education in rural A model of excellence in standardization and quality assurance services VISION areas by 2025.
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 7
    Hrvatski zavod za norme Oglasnik za normativne dokumente 7/2017 srpanj, 2017. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije .................................................................................................. A3 1.1 Hrvatske norme ....................................................................................................................................... A3 1. Nacrti hrvatskih norma ............................................................................................................................ 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ................................................................................ A10 1.4 Povučene hrvatske norme ...................................................................................................................... A0 1.5 Povučeni nacrti hrvatskih norma ............................................................................................................. 1.6 Ispravci
    [Show full text]