performance TM User’s Guide This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594. IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this household sewing machine. Keep the instructions at a suitable place close to the machine. Make sure to hand them over if the machine is given to a third party. DANGER –TO REDUCE THE RISK OF ELECTRIC SHOCK: • A sewing machine should never be left unattended when plugged in. The electrical socket, to which the machine is plugged in should be easily accessible. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning, removing covers, lubricating or when making any other user servicing adjustments mentioned in the instruction manual. WARNING –TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO PERSON: • Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children. • Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual. • Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment. • Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot control free from the accumulation of lint, dust, and loose cloth. • Keep fingers away from all moving parts. Special care is required around the sewing machine needle. • Always use the proper needle plate. The wrong plate can cause the needle to break. • Do not use bent needles. • Do not pull or push fabric while stitching. It may deflect the needle causing it to break. • Wear safety glasses. • Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, etc. • Never drop or insert any object into any opening. • Do not use outdoors. • Do not operate where aerosol (spray) products are being used or where oxygen is being administrated. • To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet. • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. • The foot control is used to operate the machine. Avoid placing other objects on the foot control. • Do not use the machine if it is wet. • If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service agent or a similarly qualified person, in order to avoid a hazard. • If the cord connected with the foot control is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person, in order to avoid a hazard. • This sewing machine is provided with double insulation. Use only identical replacement parts. See instructions for Servicing of Double-Insulated Appliances. SAVE THESE INSTRUCTIONS

FOR CENELEC COUNTRIES ONLY: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. The noise level under normal operating conditions is less than 80dB(A). The machine must only be used with foot control of type FR5 manufactured by Shanghai Binao Precision Mould Co., Ltd.

FOR NON CENELEC COUNTRIES: This sewing machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the sewing machine by a person responsible for their safety. Children should be supervised to ensure that they do not play with the sewing machine. The noise level under normal operating conditions is less than 80dB(A). The machine must only be used with foot control of type FR5 manufactured by Shanghai Binao Precision Mould Co., Ltd. SERVICING OF DOUBLE INSULATED PRODUCTS In a double-insulated product, two systems of insulation are provided instead of grounding. No ground means is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing of a double-insulated product requires extreme care and knowledge of the system and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to those parts in the product. A double-insulated product is marked with the words ‘DOUBLE INSULATION’ or ‘DOUBLE INSULATED’. TABLE OF CONTENTS 1 Introduction ...... 7 Threading Tips and Hints ...... 34 Machine Overview...... 7 Threading for Twin Needle ...... 35 Front...... 7 Bobbin Winding...... 37 Needle Area ...... 8 Winding Through the Needle...... 38 Right Side ...... 8 Inserting the Bobbin...... 39 Rear...... 8 Changing the Bobbin Case...... 40 Top...... 9 Accessory Tray...... 9 IDT™ System (Integrated Dual Feed) ...... 41 Storing a Needle Plate...... 10 Engaging the IDT™ System...... 41 Disengaging the IDT™ System ...... 41 Function Buttons...... 11 Presser Foot Up and Extra Lift...... 11 Changing the Presser Foot...... 42 Presser Foot Down and Pivot ...... 11 Remove Presser Foot...... 42 Automatic Needle Threader ...... 11 Attach Presser Foot...... 42 Cut Function ...... 12 Attaching the Sensormatic Buttonhole Immediate Tie-Off ...... 12 Foot ...... 42 Stitch Re-Start...... 12 Changing to Straight Stitch Needle Plate .....43 Needle Stop Up/Down ...... 12 Start/Stop ...... 12 3 The Multi-Touch Screen...... 44 Reverse ...... 12 Multi-Touch Screen...... 44 Basic Gestures for the Multi-Touch Gestures...... 44 Screen ...... 13 Start Page ...... 45 Accessories...... 14 Start Sewing ...... 45 Included Accessories ...... 14 Load From mySewnet™ ...... 45 Presser Feet ...... 15 Open Help Center...... 45 Stitch Overview ...... 17 mySewnet™ Blog...... 45 Utility Stitches...... 17 Main Functions ...... 46 Stitch Menu Overview ...... 20 Save...... 46 Alphabets ...... 20 Home ...... 46 Mode Switch ...... 46 2 Preparations ...... 21 Common Functions...... 46 Unpacking Machine...... 21 OK...... 46 Connect the Power Cord and Foot Cancel...... 46 Control ...... 21 Touch & Hold ...... 46 Pack Away After Sewing ...... 22 Settings with Toggle Function ...... 47 USB Ports ...... 22 Help Center...... 48 User’s Guide ...... 48 Using a USB device...... 22 Getting Started ...... 48 Getting Started with WiFi and Techniques and Tutorials ...... 48 mySewnet™ Cloud...... 23 Sewing Instructions ...... 48 LED Lights ...... 23 Stabilizer Guide...... 48 Free Arm ...... 23 Settings...... 49 Manual Thread Cutter ...... 23 Sewing Settings ...... 49 Knee-Lift ...... 24 Machine Settings ...... 52 WiFi Settings...... 53 Speed Control Lever ...... 24 mySewnet™ Settings...... 53 Thread Sensor ...... 24 Machine Information ...... 53 Telescopic Thread Guide ...... 25 Smart Toolbox...... 54 Spool Pins...... 26 Top Bar...... 54 Spool Caps ...... 26 Help Center...... 54 Threads ...... 27 Quick Help ...... 55 Main Menu ...... 55 Needles ...... 28 Important Needle Information...... 28 Information Area ...... 55 WiFi ...... 56 Changing the Needle ...... 29 mySewnet™ ...... 56 Threading...... 30 Recommendations ...... 56 Threading the Upper Thread ...... 30 Information...... 56 Automatic Needle Threader ...... 32 Active Features...... 57 Balance ...... 80 Menu Panel ...... 57 Sewing Programs ...... 81 Options Selected From the Menu Panel ...... 57 Tapering Stitches ...... 81 Toolbar ...... 58 Taper Satin Stitch Exercise...... 81 Customize Your Work Area ...... 58 Stitch Repeat ...... 82 Full Screen View ...... 58 Patchwork Program...... 82 Single Stitch Program...... 82 Base Bar...... 58 Combining Programs...... 82 4 WiFi & mySewnet™ Services ...... 59 Sewing Techniques ...... 83 Buttonholes...... 83 WiFi Introduction ...... 59 Sew On a Button...... 84 Getting Started With WiFi ...... 59 Four Direction Sewing ...... 84 Hidden Network ...... 59 Special Stitch Techniques...... 85 Firmware Update Using WiFi ...... 59 Ribbon Stitches...... 85 Firmware Update Using a USB Device...... 59 Stacking Stitches...... 85 mySewnet™ Services ...... 60 Floating Stitches ...... 86 mySewnet™ Account ...... 60 Radiant Stitches...... 87 mySewnet™ Cloud ...... 60 Lace Edge Stitches ...... 87 Used Space in mySewnet™ Cloud...... 61 Optional Feet Stitches ...... 87 Installation of mySewnet™ cloud Sync Pop-up Messages in Sewing ...... 88 Tool for Computer...... 61 mySewnet™ Portal...... 62 6 Sequence Creator ...... 90 Troubleshooting Connectivity ...... 62 Sequence Creator — Introduction ...... 90 Sequence Creator – Overview...... 91 5 Sewing...... 64 Getting Started with Sequence Creator ...... 93 Sewing Mode – Introduction ...... 64 Load a Stitch ...... 93 Sewing Mode – Overview ...... 64 Load a Font ...... 93 Getting Started with Sewing...... 67 Adjust text and stitches ...... 94 Load a Stitch From the Menu Panel...... 67 Delete a Stitch or Letter ...... 94 Select a Stitch From the Selection Menu...... 68 Duplicate a Stitch or Letter ...... 94 Load a Stitch from File Manager ...... 68 Replace a Stitch or Letter...... 94 Sewing Recommendations...... 69 Directional Stitches ...... 95 Settings in Sewing Mode ...... 70 Sequence Commands...... 96 ActivStitch™ Technology ...... 70 True Size...... 96 Automatic Presser Foot Lift ...... 71 Saving a Sequence...... 97 Automatic Thread Cutter ...... 71 Sew Your Sequence...... 97 Free-Motion Options...... 71 Stitch Limiting Options ...... 72 Adjust the Entire Sequence...... 98 Needle Stop Position...... 73 Using Sequence Creator in Sewing Mode ....98 Presser Foot Pressure ...... 73 Pop-up Messages in Sequence Creator...... 99 Options for Feed Dogs ...... 73 Tie-Off Options ...... 73 7 Stitch Creator™ Feature ...... 100 Stitch Edit...... 74 Stitch Creator™ Feature – Introduction..... 100 Stitch Width ...... 74 Stitch Creator™ Feature – Overview ...... 101 Stitch Positioning...... 74 Getting Started with Stitch Creator™...... 102 Stitch Length ...... 74 Definition of a Stitch Point...... 102 Stitch Density ...... 75 Select Stitches/Stitch Points...... 102 Mirroring...... 75 Preview ...... 103 Buttonhole Slit Length ...... 75 Button Stitch Repetition ...... 75 Stitch Creator™ Edit Tools ...... 103 ActivStitch™ Technology ...... 76 Zoom...... 103 Move ...... 103 Free-Motion Options...... 77 Add a Stitch or Stitch Point ...... 104 Dynamic Spring Foot 6D Free-Motion...... 77 Duplicate Selected Stitch Point ...... 104 Spring Foot Free-Motion ...... 77 Triple Stitch...... 104 Sensormatic Free-Motion...... 78 Mirroring...... 104 Tie-Off Options ...... 78 Delete Selected Stitch Point ...... 104 Stitch Repeat ...... 79 Edit a stitch made in Stitch Creator™...... 105 Save Stitch ...... 80 Load and Sew a Stitch...... 105 Saving a Stitch...... 105 WARNING –TO REDUCE THE RISK OF Using Created Stitches in Sequence BURNS, FIRE, ELECTRIC SHOCK, OR INJURY Creator ...... 105 TO PERSON: ...... 126 SAVE THESE INSTRUCTIONS ...... 126 Pop-up Messages in Stitch Creator™ SERVICING OF DOUBLE INSULATED Feature ...... 105 PRODUCTS ...... 127 8 Help Center ...... 106 Licenses ...... 127 Help Center – Introduction...... 106 Help Center – Overview ...... 106 User’s Guide ...... 107 Getting Started...... 108 Techniques and Tutorials ...... 109 Garment Techniques...... 109 Sewing Techniques ...... 110 Quilting Techniques ...... 110 Stabilizer Guide ...... 110 Projects ...... 111 Project Viewer ...... 111 Video Player...... 112 9 File Manager ...... 113 File Manager – Introduction ...... 113 File Manager – Overview...... 114 File Formats...... 116 Browse File Manager ...... 116 Open a File or Folder ...... 116 Multi-Select ...... 116 mySewnet™ Cloud Folder ...... 116 USB Device...... 116 List/Thumbnail View ...... 117 Move up One Folder Level ...... 117 Organize...... 117 Create New Folder...... 117 Rename a File or Folder ...... 117 Move a File or Folder ...... 117 Copy a File or Folder ...... 118 Delete a File or Folder ...... 118 Pop-up Messages in File Manager...... 118 10 Maintenance ...... 120 Cleaning the Machine Exterior ...... 120 Removing the Needle Plate and Cleaning the Bobbin Area ...... 120 Cleaning Under the Bobbin Area ...... 120 Replacing the Needle Plate...... 121 Troubleshooting...... 121 Service ...... 124 Non-Original Parts and Accessories...... 124 Technical specification...... 124 11 IMPORTANT ...... 126 IMPORTANT SAFETY INSTRUCTIONS...... 126 DANGER –TO REDUCE THE RISK OF ELECTRIC SHOCK:...... 126 Introduction 7 for 20 19 17 18 11 15 16 14 13 page Buttons, slot Function see guide thread pin screen pin socket thread spool buttons, description winding 12 switch spool lifter detailed Knee Save Mode Function Home Multi-touch Bobbin Auxiliary Main Telescopic 1 12. 13. 14. 11. 15. 16. 17. 18. 19. 20. 6 11 6 9 2 3 button lever discs release slot Overview 7 8 tension take-up cutter plate cover cover oduction 10 plate light 4 6 Intr Base Lid Thread Thread LED Needle Bobbin Bobbin Thread Threading ont 5 10. 1. 2. 5. 7. 6. 8. 9. 3. 4. Fr 1 Machine Introduction 3. 2. 1. Rear 5. 4. 3. 2. 1. Right 7. 6. 5. 4. 3. 2. 1. Needle 8 Free Accessory Handle Control, control. ON/OFF Speed Built-in Speaker Handwheel Presser Presser IDT™ Presser Needle Needle Needle Automatic Side arm control Ar thread bar Threader, foot foot foot USB See page ea switch, socket needle with Connect ankle bar ports 21. lever guide needle sockets page threader, the 33 clamp Power for see power screw Using Cord cord and the and Foot Automatic foot 1 3 2 4 5 3 2 1 3 1 7 6 5 4 2 Introduction 9 winding 5 10 guide bobbin 6 for guide thread pin disc 4 thread pin 9 spool tension winding spool 8 3 Pre-tension Main Auxiliary Bobbin Thread 7 2 1 6. 7. 8. 9. 10. for so and 6 Foot catches; accessory tray the the safety needles in 5 in red sewing. for one Buttonhole compartments 4 two and sewing) before space 3 with bar special accessories Manual plus before foot the 5M removed 2 feet plate be for delivered lever discs features lever Store is presser all ay bobbins, (remove r 1 hole accessible. tray T presser bobbins the accessories needle and to take-up tension cutter winder winder for for should catch for for with machine easily feet accessories. The are These accessory attached Bobbin Bobbin Safety Thread Thread Thread Space Space Spaces Spaces Space op Accessory The presser 5. other they 6. 4. 2. 3. 1. 3. 4. 1. 2. 5. Note: one T tray. Introduction 2. 1. accessory Store Storing 10 To that right Insert lift the the remove the left the side needle the tray. a plate. side needle Needle right (A), the of plate push the plate, plate side plate, not Plate it of snaps place slightly. in the push use plate a into finger in it Lay the place. into to the it into bottom spring down right the of (B) hole on and your the so then by B A Introduction to 11 read to button again 33 threader, this the needle page it. down accessories, needle use touch to foot using 7 how Light automatic Threader, place, attached before automatic on in presser for eader is the other 6 to Needle or Thr Reverse Indication threader Touch thread carefully foot thread automatically. 9. 10. the damage the needle fabric. 5 Needle presser Automatic needle place the position. When instructions to prevent the the To needle, the automatic holds how pivot 4 Using to thread learn threading. to Automatic See firmly go up/down tie-off 3 start sew, stop raise restart to machine you The the will heavy 8 the Start/stop Immediate Stitch Needle be get 9 when foot raise 8. 5. 6. 7. starting and to will button. to Lift 2 1 presser before teeth easier once a pivot Pivot it lowered the 10 foot feed and Extr automatically lift button and and make the foot. pivot to up down and extra presser and and threader again completely lowered foot the foot and Up Down be is presser up down Buttons lowered needle Touch the oot oot will foot position, lower F F foot foot presser presser To lift foot. foot function the under the presser Presser Presser Automatic Cut esser esser extra unction to presser Pr The Pr Touch automatically fabric sewing. touch 1. 2. presser 3. 4. F Introduction change Tip: intensifies or indicator touching when temporary Note: threads completed, requested. indicator touch To and the needle needle Touch Needle stitch When Stitch sews Press Immediate Touch Cut special stitch. 12 down cut upper You needle. a F using If immediate re-start the once you The threads needle the the unction few when settings automatic under interfere accessory bobbin small Some and can Re-Start when the is light cut session set Stop and cut when you stitch stop When the tie-off your lit, also raises circular optional tie-off stop you the function to stop cover. function cut bobbin will stop at the you Tie-Off you with sewing begin tap is needle or needle settings machine presser tie-off the Up/Down the position. stop stitches function. function attached the up/down sewing. intensify, stitch touch button the Do made. the holes accessories end stitch threads presser sewing button sewing. plate. button foot not in while automatic stop foot the of sequence in the and cuts the Tapping in once use control or can a presser lift the down alerting these to button. stitch while middle sewing stitch at foot and stops and the the The has are needle be set more the thread cut to upper holes turned attached raises and your been the foot needle the will is or sequence sewing. automatically. beginning raise The you function set. of and plate while foot stitch will position needle. as deselected remember cutter a machine the and or indicator stitch, that off. that your control will just in not lower the The sequence, presser the bobbin is when located may a be move above of machine of action cut touch two in raised cuts does the the the any By an light is foot the up not the darning Reverse as machine Touch Start/Stop button intensify before For When Reverse start/stop touch long parts permanent the reverse the starting while as is stitches sewing and of button you start/stop also to the begin sewing, the is keep to used reverse, stitch. and active, without again machine sew. and the when tapering button the The to the touch button touch using machine cancel. sews sewing reverse reverse to stitches again the start pressed. the in If reverse manual will reverse indicator foot you indicator and to to stop. sew press control. stop step button until buttonholes, in will intensifies. between the the reverse you Touch once reverse for Introduction 13 is touch select. to the to swipe to gesture the scroll ouch without and, to out). areas with swift screen different and a seconds a between used screen in the to is (zoom detailed time few screen Multi-T screen on a your and finger more pinch distance for finger same swipe Screen. on the menu. or setting the For the your your in) or for at Top-bottom/bottom-top buttons stitch multi-touch a releasing window es below. the move a release (zoom some button Multi-Touch fingers on screen. e.g a menus. within on and see options. on without on two the Move stretch Left-right/right-left increase/reduce Hold Gestur stitch described on releasing, Used scroll to move and & once with once once more navigate to een swipe. hold. Touch Touch fingers without between used Swipe Touch, releasing position to Pinch/Stretch Touch Touch & access Touch Touch Touch gestures information, Basic Easily Scr Introduction • • • • Included 15. 14. 13. 12. 11. 10. 9. 8. 7. 6. 5. 4. 3. 2. 1. Included Accessories 14 Power Foot Soft Needles Multipurpose Straight Knee Bobbin Large Spool Spool Spool Thread ankle) Edge/Quilting Bobbins Brush Seam Screwdriver Thread cover control lift ripper cap, cap, cap, spool cord Accessories case cone net Stitch (6) Accessories for small medium large (4) holder for holder machine tool/Button Needle guide straight (2) (2) Not (2) (2) (used Plate in stitch Picture reed attached left (black) to presser foot 1 1 7 1 4 1 2 6 1 2 8 3 9 1 0 4 1 3 1 5 5 Introduction 15 to it The foot the right foot has stitch to to the the a needle the darning. cording that fabric. of in on making on the utility for machine. edge. with the needle position holds used length the from used other hem groove needle, icon™ stitches. foot the be underside guides the markings when stitching and the The from needle in the the the of of also foot the distance of on foot. oot over sewn left fold the can Move zigzag F Use stitches The performance is distance back this on especially the the foot and groove teeth. or the your toe The use plate. zigzag System Motion smoothly This on along The The with right stitches. ee T™ zipper buttonhole buttonholes. stitching short ride flow length, (6mm). System Fr needle oot the patchwork, ID the finger F to or to the the sewing. ¼″ (3mm). System delivery) T™ stitches. for of stitches. and is The stitch oot teeth. over stitch ID System ⅛″ compatible either F manual straight System T™ oot toe is upon on F for stitches ID sides T™ motion and for edge. T™ designed designed machine, toe ID piecing 1.0mm zipper mm. machine. for is ID for is right straight oot oot Buttonhole sewing free decorative blindhem both to F F the smoothly for 1.0 for esser the for to the right the than to oot foot for for for for mainly foot machine snapped Pr F Buttonhole garment of oot flow decorative than the closer into be oot F the the less designed the Stitch Stitch with F close oidery/Sensormatic to used perfect used used used used the of buttonhole. of on on edge feet is is is is can is is sew with sew longer connected sewing to ancy ancy Manual edge Embr Sensormatic entered F F to foot foot foot foot foot foot foot - Blindhem Zipper -Standard guide – Quilting – - - outer corded left position presser designed – – inner been the is red conjunction 6A This ¼″ This stitches 5A When 5M This for 3 This 4 This length 1A This 2A When to OA (attached This underside easy or only use results, sewing eet F best the For esser Note: Pr Introduction 16 presser This 8 center, techniques The Bi – Level Maxi Bi foot Level allowing foot is Guide Stitch such used is Guide designed as the for F F oot oot Edge Foot presserfoot side-motion for to is stitches ID be especially T™ higher to System and stitches. glide on floating suitable the along right stitches. for a folded side, sewing and The edge. the underside has exclusive a guide of stitch in the the Introduction 17 elastic fabrics joining decorative decorative with step. step. step. for and and quilting, bulky one one one used for in in in insertion. suitable sewing. Also leather, finishing finishing stitch lace fabrics fabrics fabrics Also hems. stretch cloth, edge edge and topstitching. and stretch stretch stretch and fabrics. fabrics. fabrics. terry or stitching. decorative top fabrics. patching, patching patching, finish fabrics hems stretch woven stretch for batting, on on seams. for clean overcasting overcasting overcasting and stretch stretch the darning, darning, darning, quilt and and on and hem hems hems for topstitching. undergarments, batting. decorative seams, sewing. and seams for bobbin. for of and seams seams seams seams blind appliqué. blind quilt stitch sewing, sewing, sewing, the fabrics stitch and in stitch decorative types overlapping sewing sewing sewing all sewing reinforced reinforcing sewing seaming stretch stretch stretch sewing sewing For For For For For For For For Description For For Decorative Elastic For sewing. For sewing. For thread fabrics For Joining Joining where Elastic hemstitching. stitch stitch straight zigzag stitch hem stitch elastic zigzag stitch stitch stitch stitch stitch stitch tricot triple triple stitch overlock overcast blind stitch stretch hem Overlock Elastic Stretch Basting Closed Zigzag Stretch Triple Elastic stitch Name Straight Honeycomb Stretch Three-step stitch Elastic Z-zigzag stitch Bridging Crosshem Blind stitch Foundation № 1.2.3 1.2.2 1.1.3 1.1.4 1.2.1 1.1.5 1.1.2 1.1.9 1.1.1 1.1.6 1.1.7 1.1.8 1.1.16 1.1.11 1.1.10 1.1.12 1.1.14 1.1.15 1.1.13 Overview Stitches Stitch Stitch Utility Introduction 18 Stitch 1.3.11 1.3.10 1.2.10 1.4.3 1.4.2 1.4.1 1.3.9 1.3.8 1.3.7 1.3.6 1.3.5 1.3.4 1.3.3 1.3.2 1.3.1 1.2.9 1.2.8 1.2.7 1.2.6 1.2.5 1.2.4 № Decorative Decorative Eyelet Bound Button buttonhole Decorative buttonhole Decorative buttonhole Decorative buttonhole Decorative Stretch Rounded pointed Eyelet with Rounded Standard hem Closed hem Open Mock Mock stretch Closed Closed patching Light Name crosswise knit overlock cover cover buttonhole buttonhole sewing overlock overlock overlock buttonhole tack buttonhole buttonhole buttonhole fabric Eyelet Eyelet round eyelet eyelet eyelet hem hem blind tack blind for with For For For For Decorative Decorative Decorative Decorative Foundation Buttonhole Buttonhole Tailors Basic Create Create For For Buttonhole Create Create fabrics. For Description belts, belts, belts, sewing patching, patching patching, buttonhole decorative decorative the the buttonhole laces, laces, laces, look look heirloom heirloom buttonhole buttonhole for for for on stitch and sewing sewing buttons stretch light garments. heirloom heirloom heirloom of of for sewing overlock overlock for a a or serger serger garments blouses, buttonhole. buttonhole. hems, hems, bound decorative fabrics. for for or sewing, sewing, sewing, hems tacking. jackets. jackets. cover cover blind blind sewing sewing buttonhole. shirts or in buttonhole. hem hem jackets. hem hem etc. etc. etc. stretch and seams seams for for for for jackets. fabrics. stretch stretch stretch woven and and overcasting overcasting. Also fabrics. fabrics. fabrics. fabrics. for pillowcases. in stretch Introduction 19 of of of stop. end end end reverse auto towels. lower lower lower touch at at at and linen as as as hole, and well well well darning over as as as loops. cloths loops loops loops belt table stitching belt belt belt continuous and etc. for jeans, begin stop. sewing, openings, openings, openings, openings and holes, reverse clothes, shirt shirt shirt shirt small touch work heirloom darning hole, mend pockets, pockets, pockets, pockets, mend laces, or over and belts, continuous darn zipper. zipper. zipper. Description For To for Darn Stitch Reinforce a Reinforce a Reinforce a Reinforce darning Eyelet bartack darning bartack bartack Name Decorative stitch Programmable Programmable reinforced stitch Bartack Denim Decorative Cross № 1.4.4 1.4.5 1.4.6 1.4.7 1.4.8 1.4.9 1.4.10 Stitch Introduction Stitch Alphabets There Stitch Outline quick 20 2 detailed See 1 Stitch 9 8 7 6 5 4 3 — — — — — — — — — also Quilt Utility Additional Stitch Monogram Miscellaneous Decorative Satin Needle help fonts are Menu and Menu stitch descriptions. several function, Stitches Stitches are Techniques Script Stitches Art Name available table Stitches Overview Stitches Stitches Stitches different alphabets. Stitches see for Quick in stitch Block, Help. menus 1. 4. 3. 2. 1. Sub 3. 2. 1. 7. 6. 5. 4. 3. 2. 1. 2. 1. 3. 2. 1. 4. 3. 2. 1. 3. 2. 1. 3. 2. 1. 2. Comic, Handlook Eyelets Buttonholes Overcast Essential Crazy Stippling Optional Lace Radiant Floating Stacking Triple Double Single Monogram Monogram Fun Animals Bows Maxi Ornamental Art Leaves Borders Satin Scallop Antique Needlework Cross Four Menus with stitches stitches Cyrillic, edge direction elements art and stitches patch ribbon ribbon and and edges ribbon stitches stitches hand stitches stitches stitches stitches feet stitches stitches hearts stitches quilt 2 1 flowers darning stitches stitches stitches Grand, stitches stitches stitches embroidery stitches stitches stitches for all stitches purposes. stitches For detailed description of a stitch, use the Preparations 21 1 2 3 a and that the into results. the outlet blade Do to cord oot the bottom cord power contact the on F ensure needle sewn electric removing in (one to on fit, Connect the the of outlet. the temperature. and power wipe and adjusted on socket not and polarized plug fully turn check risk is Plug a the affect d fit room to bag, box control). control. rear in proper the does needle "I" socket can find not fit the foot the the sewing. Cor control, to foot the still machine to of of normal way. plastic polarized to will machine. it front a does reduce foot at the If out the any install the before To you the cord the switch has icon™ around in plug to of from to in oil result and temperatures machine. Power intended plug. underside Canada the Machine is ations side plug other). any the machine power the If cord cord cold (see stitch and the machine of ON/OFF the the the the plug socket. the accessories plugging and material right performance best electrician way. particularly the side USA epar ol "FR5" hot control. out the reverse remove control this light. than the wall one sewing lifting to Before Your the modify Pr type foot Pull foot right Connect the Press and bottom packing is This not For wider shock, only outlet, qualified Among all Connect Contr Unpacking After 2 machine, plate Extreme the Note: Note: provide it 1. 2. 3. Preparations Removing USB shown Note: when devices The Using FAT32. inserted Your USB 1. P Note: remove, 4. 3. 2. pocket Tip: 6. 5. 22 ack Press tray Place the the Unplug the Unplug Put Place The external device. Do Make machine a of on foot cord machine. on Ports device such on user’s Aw the a one carefully not the all the the the the USB sure to control. soft the the gently accessories remove screen way device ay foot ON/OFF device as the guide soft has is foot cord that cover. a connected After machine memory control device – pull two cover. or and at do the the and button control from while that not the USB switch USB USB release. power in in Sewing time the USB the force around stick. the in cord the device to ports stick wall file cord to accessory file a can device space The them machine USB "O". from you manager manager for if damage can the socket a cord use connecting plugs loading above into be free the out tray. has stored will USB and the machine. is the straight. arm. is can the shown. the spinner files only Slide retract then ports! port. in format only free USB the on active from the Pull your is arm. To be back into Preparations 23 icon cloud icon WiFi mySewnet™ to the a the cut the your light for an web If to and be When settings have touch A for the both machine. the left. machine. cutting can of the prompted not create front shadows. tray. spindle Pull for the locked the in your to be do machine. and the button. to in Cloud. networks. on machine thread it corner tray to area in will distribute light you connection, winder your the If threads. left The eliminate accessory the Register you WiFi Introduction. back Sign of bobbin in. cutters of which WiFi sliding top bobbin available the and WiFi . a the the the log bobbin accessory side by of mySewnet™ WiFi select connect bobbin the off the Cloud with Cutter thread area lights winding. to the the can in to with left list see see from connect. tray touch and protected, to slide placing Settings to the the brightness Cloud you LED after the next ead top and keeps below established on cutter is sewing button manual password, the close arm, after has is from tab Network is the Thr the Started where one mySewnet™ a hook thread steps password quickly. have and free Machine WiFi cutting three one information, information, a Remove password to to is one adjust into Arm the thread the Select over Lights the see the you are the machine opens sides. name can down third second first more more use ee account. For pull view The manually threads Connect user menu, from The bobbin For enter You attached, machine. cutting There Manual Fr To network mySewnet™ evenly The Your LED ™ mySewnet Connect screen. When Touch Getting Follow Preparations also sewing To positions foot Move you knee-lift the Match knee you knee-lifter thread sewing If low, If Thr indicating A The Speed hole. To when presserfoot. allowing extra extra allows Your Knee-Lift touch bobbin. opportunity re-thread If screen. 24 bobbin the needle pop-up increase remove knee-lifter speed (A). to will shown the lifts ead machine lift lift needle you OK your the handle you runs speed, without When machine until position, position. raise. thread you thread the with the in appears ribs start which control Contr is the to knee in sewing Sensor out The to the thread very presser machine to lift it the the socket. comes the slide You your on knee-lift, plan to completely. is closing easily breaks: pop-up. feed is lifter speed the stops your information fabric helpful sew. the When positioned bobbin lever on running can ol speed, the breaks knee-lifter; where foot presserfoot with teeth screen machine Adjust with and place Lever knee-lifter raise and lever level the sets Remove with just moving to when is slide an touch will to or your pop-up low: a replaced the the This thick pull the when is the down. at your pop-up electronic stop bobbin area. drops set. raise pivot the desired a maximum sewing, presser You knee, the with rectangular the gives it OK comfortable fabrics with and hands adjusting straight The before lever thread automatically presser can in with height, the thread appears your and change you the speed the knee-lifter height. foot since feed up, continue underneath while a the sewing the notches knee. an out pop-up. completely, full is foot to the up, bar to it teeth, setting on bobbin height the presser running of three decrease your allows one, slider, and on to the The the speed. that in the the for is the A Preparations 25 pull Guide it thread, winding. and cones. straight thread the when it make Thread The bobbin place. thread pins used push and illustrated into straighten as and large spool Telescopic breaking. always Guide sewing clicks is helps or very guide the guide it for vertical use ead guide guide until the thread thread tangling it Thr the machine Retracting with thread thread turn from it successfully and hold your up, telescopic to together the telescopic telescopic retract, straight elescopic T The To threading down. The Hold it preventing guide possible Extending Preparations when from thread Use thread. horizontal You spools Note: vertical sewing. spool thread Use all an There spool prevent spool thread running is machine. Spool Spool threaded horizontal regular Your Spool 26 needed types auxiliary the the may a Tilting machine pin cap cap or sewing caps should spool. and spool, second See sewing position auxiliary main Remember the cones. low. of and get For Caps Pins in should slightly except position position in for thread. Threading thread vertical spool the better most If place spool three be with close has spool bobbin and the spool no when when spool be larger pin. two a types from thread sizes the a when if results pin to space embroidery pressed position. of twin pins spool you place winding Tips you The spool lid thread the pin (A) snagging. than are of is using needle. between want when is if thread cap start spool (B) when and not thread the included snagging firmly you pins; the Place or when possible on through to spool small Hints, thread, to you for tilt pins thread threading on keep top. a spools, The sew the against the main a the have winding the pin spools with second are on page spool with Always flat spool again. the use the spool spool spool the back spool designed no finished side your machine the large needle. the 34. the cap of top pin spool spool a pin to is in spool. use specialty main upper of bobbin pin thread and of in the to the a cap for For the the and the the Main spool pin A (A) and auxiliary B spool pin (B) Preparations 27 is and and wind all used up may cotton is Tips speed. for light home thread, bobbin you developed optimal A fibers: quilting the build bobbin, threads bobbin the different of a thread for not in today decorative seen. the thread, of synthetic, lower and designed Threading full. These in garments, be of for used is does film and variety achieving used type See is a half winding monofilament will market on It eye used flat thread made a This of the thread is metallic. sizes. from or machine including When called often larger bobbin typically or on project thread. appearance a is spools. types Thread spool the made not also thread the weight icon™ metallic is is with information polyester. fill of acrylic a projects, and threads glossy thread thread for techniques. synthetic and Thread Sewing thread, lighter purposes. sewing of different needle 34 sides Thread using thread thread quilting. a stitches. many covered sewing threads The smooth clear bobbin with use polyester, both speed and page the a are of sewing performance When eads to Purpose purpose different most cotton half single There for types instead. Thr Your All All Hints, results sizes/styles weight, under Note: or for unless Decorative decor, Decorative rayon, create stitching. Decorative need Transparent Transparent a other at Preparations A damage Do the breakage with of package recommend successful Change Important The Needles other to Wing Wing denim, woven Denim Denim specialty to rounded Embroidery Embroidery swimwear, stitches Stretch Stretch variety Universal Universal come 28 damaged poke thread the not needle sewing a hemstitches in needles Needle most sharp fabrics needles use needles microfibers. properly. thread needle using. Be of Needle Needle when holes the a your included point threads and or variety fabric needles sure Needle sewing. plate. asymmetrical fleece, frequently needle machine needle snapping needles needles Needle point eye. Heavier in sewing the materials. there have Needle without to and have have the types match automatic for of If with on synthetic have (A). Use often. (B) a wide the is fabric sizes. of have a decorative a needle slightly natural machine. threads a of and sharp special used can deflecting needle system the only your flex a Use Information the wings Always twin slightly a For when needle weights. needle cause special in suedes sizes. plays quality thread. machine point with require fiber larger eye scarf general the needles 130/705H. on sewing. sewing is to skipped threader rounded the use metallic fabric. an fabrics. to too the the scarf, and to eye a needles. It penetrate important needle. needle a contains eliminate sewing small can thread side (C), straight to leathers. entredeux For a may stitches, The avoid also and slightly point they of with for We you knits, For not the in needle needles the other damage tightly needle skipped role can a a damage and are canvas, work needle larger and in Preparations 29 A tool. the side needle inserted hold is flat to the further. needle tool automatic multipurpose with no the the the go that for carefully. will properly. using upwards it order screw multipurpose screw. Needle in work important until to the needle needle way in needle. the needle very needle you the new is new the the hole the threader all It the from the the Tighten Use needle. Loosen Remove Insert Push away 5. Changing 1. 2. 3. 4. Preparations For Thr position. Make Thr threading it 2. 1. pin cone Tip: thread spool spool. result, If sewing Note: 30 out you in most When Using thread Raise up Hold should clip holder eading pin eading gently When sure cone the experience See there results. until on before regular vertical the removing the both Threading might from that both using spool from the run are it telescopic upper the placing clicks the spool telescopic wobbling. hands, from alternative the become thread thread on problems position presser the Upper top. thread the into Tips pins right the thread place cones, stuck thread qualities main thread place. thread to and is to foot ways from with Thr vertical recommended cone the inside left. place spool Hints, guide and cone. thread the guide the to and ead from a the position needle pin cone thread This main position. page and spool thread the (A). behind (left). holder prevents spool pull (left) 34. are The or sizes, for the cone. Place sewing it in pin, on optimal the spool thread thread straight the the the Push left the the up A Preparations 31 A C B F D E to (C). (D) that This Floss and Bring above left the front discs slot to lever just path. slot. the ensure threading process. needle threader, in from (F) next Automatic and and illustrated. tension (A) the take-up as needle down threading guide threading through lightly threading thread the threading the automatic 33. guide thread Using and and left the right the hands in into thread the thread see the on instructions (E), page the automatic the into two the thread last the seated right the using place back the the hold tension with the read throughout between to through of to Threader, through using into (A) manually. properly bit needle under from thread slot a is thread or thread the down carefully Before recommendations, Needle clicks guide Pull the Continue it upwards the (B). create needle. thread thread thread threader Thread the threading until Pull Hold back. slot Note: thread the will the Thread then the 5. 4. 3. Preparations Selecting Automatic information Note: 32 Vinyl Leather heavy Stretch medium Stretch light Stretch medium Woven light Woven Fabric heavy Woven Specialty threader. with Avoid needle The Corr on combination a and Vinyl, Suede etc. Sweater swimwear, double Sweater jerseys, Tricot, etc. broadcloth, fabrics, Calico, de batiste, Chiffon, etc. canvas, Denim, using threader. bent needle fabrics Needle chine, ect Unsuitable suede needle fine faux and single Threa quilting types knit, challis, crepe, etc. tweed, terrycloth, and knits, knits, organza, etc. needles of leather may etc. leather threads velvet, Thr the velour, and knit combinations, d/Needle fleece, crepe thread cause eader sizes with may damage for heavy weight require • Medium • Medium • Medium • • • Thread • Medium • • Light • Medium • • Light • • • • Medium/heavy • your Combination rayon rayon rayon normal normal normal rayon rayon fine rayon rayon fine normal top fine/normal normal rayon such fabrics and to sewing weight weight stitching a cotton cotton, the as special weight weight weight weight weight embroidery embroidery embroidery embroidery embroidery embroidery embroidery embroidery the cotton cotton cotton cotton cotton using to needle needle needs. reduce threads: threads: or polyester needle cotton thread a weight threads: threads: threads: threads: threads: polyester threader. or or or or or heavy size the polyester polyester polyester polyester polyester for thread thread thread thread thread thread thread thread or is risk weight threads: or best extremely polyester sewing of silk stitch bending sewing sewing sewing sewing sewing thread sewing results. thread important sewing for the thread thread thread thread thread thread a needle. Refer fine thread when needle, to Using your using may the PFAFF® the cause automatic automatic 80/12 Universal 90/14 Stretch 90/14 Stretch 90/14 Stretch 75/11 Stretch 90/14-110/18 Universal 70/10-80/12 Universal Needle 80/12-90/14 Universal damage retailer needle 130/705H-S 130/705H-S 130/705H-S 130/705H-S needle 130/705H 130/705H 130/705H 130/705H to for the threader more Preparations 33 not needle weight needles will icon™ heavy with needle automatic C some the the threader and performance A using back. happens, needle your to threads, this the for If front use manually. recommend metallic from we available flat needle cannot threader. B or the You threaded needle accessory is accessories metallic thread 70-120. or manually. needle optional size automatic needles. optional threads, the again needle the all to and/or that the triple on needles the with or and stretchy to threader it cutter The sure the hook before from that with thread Thread/ used needle place. threader sure the pull other or according needles be make when needle used by the clamp thread correctly Check during button. into and size thread and be make Correct needle twin to again cannot eader (C). the head (A) button. the and needle accessory thread a needle manually, inserted to correctly automatic rise Thr threader. “clicks” lowered the to invisible 32. the threader is needles, it bent, hook Selecting cutter and the as designed pulling will threader sewing or into in you needle page is the caught needle damage wing by until needle such the touching needle and using the be Needle way weight thread attaching needle to the (B) allows not avoid the under Try damaged the up threader thread automatically smaller, that threads all To simply thread before in automatic discs finished. may not is or threading up Combination, by automatic sequence, is is the the sure thread needle 65 automatic the thread excess threader Automatic foot front recommendations threaded. the the to The threads Specialty size be When The machine. threader the cut needle match pushed using our Needle Make the needle between and Place Pull back Touch presser threading threading 1. 2. 3. The automatically Using Preparations When If can Note: If differently as There Thr larger spool on spool slides If space pressed snagging. thread, Note: below spool If the break. caught If 34 experiencing the the the the well the flat snag eading only, Always To thread thread to holder, between thread thread down are than the over Place spool the under as side firmly prevent keep on many the thread thread The not if the the up the the on pin. spool is test the spool slides place shape it the the Tips flat against of the thread spool before problems, the in snagging edge large threads net spool sew top Place on a thread place. side spool has quality standing a is down should and the where on and thread of before spool pulled placing spool the is the a of a the spool on size Always spool spool cap or full scrap the try on spool. same cover the that Hints increased the spool holder net placing to thread and or of up spool the the thread is the piece around cap prevent market unwinds the nearly the as diameter running on use There tips the standing and thread illustrated on on thread lower cap of the spool it spool thread a thread and fabric top pull the on empty. spool the today the should should spool easily part low, spool. the narrows. spool as of it hints spool spool the tension thread thread to can spool. the the cap spool developed of from check pin the spool be be and the below. pin get thread large pin can slightly thread no on from spool thread pin. the with and up affect the sewing for the different result. behavior purposes. of the thread. The quality Threads and can structure also behave of the thread Preparations 35 A B B A spool to the a that a as a the This spool the place from spool main into from spool the cone. from path. spool and to place the thread up Make Place thread ensure guide, (A) the up (B), then behind process. back not the the next illustrated. main thread and side in telescopic auxiliary and from pin auxiliary Do as guide thread needle. prevent the threading the guide Threading flat the position. are the the lightly unwinding telescopic left, pin. the together threads threading on spool may twin the allowing tension. on to hands thread in thread a (B). the it pin. from adding thread the the thread, under telescopic needle when to clip spool as threads the with vertical cones two the on slot right thread with the threads seated to up Needle the spool before the left thread and position, auxiliary curls on with place spool the holder on from thread pin the the under much pins hold specialty or tension telescopic foot the each 30. win described throughout needle the clips to thread T of of tilted too properly Pull (A), as spool on threading the large of spool place spool (A) in hands, bit spool threads page from are both for Pull a behind on threads the not tangles top presser large back. create left. sewing spools guide spool using both spool. guide on used thread pin both both the on Continue Do to clip to thread the the through create will the thread behind be threads the Thread, and thread cap the When rotating. that eading holder thread will the the front and Note: Note: spool thread right right this Floss Hold thread Using pin Raise place off smaller can the Note: pin, cone 2. position. 1. sure Thr Replace If For pin roll Place spool from guide Upper Preparations 3. 4. 36 outside. the twisted threading the then Thread and (C). Pull Thread until threads Note: breakage on the needle threads Make one the upwards they The thread. such twin Do down the together. threads and Make to weight click slot. sure thread not the twin from as thread needle! By through metallic use through sure right One that into reducing and between needle the guide the breakage the you thread place irregular side right automatic increases the the threads manually. place (F) the of the (E), into right should left is the and tension, surface thread reduced. and one threading the the needle tension do threading the down thread amount be not take-up other of the tension threader placed specialty become discs. risk in slot. to one of slot lever the of the discs friction inside for needle Bring and left left (D) E D F C Preparations 37 B A C E D F as the end the left. not right lever the cut of bypass the The thread the Remove instead. such pin. play facing Do bobbin and thread thread from from the the flat a thread to play adjust thread and bobbin (C). The especially from or in (D) logo To stop speed. the Press the spool the models. amount bobbin and the closes. winding thread happens, needle icon threads towards (A). behind the let machine. the winding winding the will result following the lower the this (E) spindle Hold front directly designed to bobbin metallic Touch using screen. and If at with bobbin. pause machine will guide to bobbin Pull auxiliary are icon™ message thread reduce on the lever bobbin bobbin specialty the the left. threads, to the slider. in path tight. winding bobbin wind. the way, other the passing directly back thread wound to (F). to threads threads, thread to (B) thread. the too window on the slot the be full, (A) one the pop-up included pull from appears Touch is from the close right on through through winding the specialty on cutter and cut performance drag including without The on threading spool (B) tension guide wound specialty popup stretchy starting outside. end illustrated. should fits turns. is hands, from bobbins some and bobbins telescopic pin your back pop-up bobbin as thread thread the bobbin bobbin the speed thread wind A guide through Winding thread, The for For normal that thread use tension thread only few thread run the other in when to the both (C) the the the a a thread the of spool or move on threads, bobbin foot. Always inside Place again. When Thread bobbin loose will automatically. Push out. bobbin. winding firmly wind the winding button Bring guide Place Bring Using clip tension should types 5. 3. 4. All Bobbin 1. 2. presser Note: invisible auxiliary metallic Preparations machine. needle is When Winding 7. 6. 5. 4. 3. 2. 1. 38 convenient winding the automatically. will When Note: again. loose Push close wind button firmly winding bobbin. only Place inside Thread guide threading winding Use winding Pull Note: foot the Thread the Make using without Winding, specialty become through heavy or such We Upper up bobbin both move and the fits flat to Always Always the thread the a sure (B). the to do when position. in Thr few use for The through the as the A the from thread on and up thread thread speed metallic the to bobbin not hands bobbin the too bobbin invisible slot pop-up back your Thread, the that having bobbins and machine bobbins threads bobbin. turns. wind one same ough to page end coarse outside. recommend starting use use the high, popup needle and the The from drag performance the cut and way, cutter guide to needle. the a a winding threads on 37. close thread a is metal metal Touch appears right. or causing from to bring as from threads included page pop-up presser the new the full, slot the the either as window the the other to unthread/re-thread described with (A), (F). to thread described other presser wind. presser bobbin winding winding through bobbin in left slider. 30. the needle, the in Needle the the lever as stretchy should the Cut the the up on foot message the icon™ are to bobbin thread the machine pause bobbin. needle and screen. using Touch through under logo bobbin right the foot. designed foot needle Hold spindle. (E) and directly the thread speciality under not will under machine. let threads, free when towards icon facing needle. through winding to needle through Bobbin closes. the be models. the the Press the stop To (D) and break. tension thread the wound the especially through bobbin The and Threading bobbin thread adjust play thread threads your metallic from out. Very bobbin, presser Do play are Remove the Wind bobbin bobbin cut thread lever can end not in the end the the it D F E C B A Preparations 39 B 2 D A C 1 3 4 and left (C) only it button will in the the right from to until pull the performance it around release drops (B) bobbin to It (D). you the your thread keep The to for spring the case. firmly up. cutter when threading cover. pushing Pull the bobbin designed thread by bobbin tension facing thread the the cover. the the Continue the logo on cover in Bobbin of Remove bobbins pull into the place. the bobbin counterclockwise left the finger you machine. right right. bobbin bobbin with the into as only the the the the your the to rotate to way Use icon™ to cut. then and Replace to turning “clicks” one then thread. Place Open (A) Place 4. 3. 1. 2. Inserting Preparations 4. 3. 2. 1. recommended. your left. straight bobbin bobbin at bobbin The Changing 40 delivery case Replace the front Remove the shown Place the pushing Remove performance A screen symbol bobbin needle cover. case case cases. stitch holder part the and and the when is (2), the the the screwdriver of Bobbincase that plate. recommended will case gently (E) bobbin is the bobbin presser release is the icon™ used the the has back be (C) bobbin Bobbin Straight shown turn Straight moved case by for button case foot. in comes under (1) lifting place. most the case (D) holder is Open in to its Stitch Stitch screwdriver (A) mounted with and the use sewing. the by it Attach needle Case to up. the lifting (B) information needle when place Bobbin two Bobbin the bobbin covering the position The on right. different the it sewing plate to the up. needle Case. Case second bobbin pop cover Remove machine Remove area the as to is a This off plate. the by on 1 3 4 D C B E 2 Preparations 41 A on two light the which down, As eed) in shifting fabric system use feed F ensuring material with the Press striped sensor from and The ideal dual system seams or IDT™ system. (A). system, Dual feeds on the system The the IDT™ time. layers PFAFF® IDT™ plaid IDT™. position. aligned IDT™ an IDT™ cut-out the the IDT™ the ated same system rayon. System high release with provides the feed, layers the puckering engages. sewing the back to Pull prevents and System it T™ at engage IDT™ extra with dual quilt you ID silk Hold precisely, to when T™ (Integr equipped the center ankle. until machine as system is should ID work from the bottom foot. foot the eliminating fabric all match such you keeping down ribbed the icon™ and integrated IDT™ if with any away For machine machines, the it presser presser the the top you System feet fabrics at perfect upward. system of sewing, precisely, the the Your the pull alert sewing T™ fed more then slowly will fingers is IDT™ Note: Raise Disengaging solution: industrial from Important: Engaging performance weight presser Raise ID For a fabrics. action while Preparations 2. 1. Buttonhole Attaching Line Attach from Press Remove Changing foot foot raise You snaps the 42 the Insert Snap presser snap under can up or the the into accessory lower the also on presser Pres presser the onto place. the foot Pre pins the use plug, the presser the ser the the Sensormatic holder. sser on foot the foot socket presser F presser with oot the F presser holder. Sensormatic Pr downwards oot foot F foot Press oot at the esser foot foot the holder, three with Buttonhole foot upwards back holder. holder up/down the dots F until so of oot gap that Place the when facing until it Foot. underneath disengages sewing the buttons the lowered. the out, pins presser foot head. into of to the Preparations 43 up (B) the by and the The Stitch foot and the the lint plate, with cover. area, supports down Remove needle. cover Place at needle the any seam. certain Needle to presser a the shown piecing. Plate twin Plate Straight right. prevent bobbin for bobbin of clean as the as bobbin off notches compatible the the lowered. quilt the the end damage the to used the such helps pop not Needle as plate, plate Needle are Stitch or is is to into (A) touching and into Open position such Plate, Replace that by teeth Stitch needle Stitch and/or Plate needle fits area. down aight breakage the it foot. button feed the teeth needle Needle mode, place. Str that lowered, the Needle Straight screwdriver bobbin the Straight accessory feed needle pulled into so beginning to under release presser button. to Stitch the the the the the changing any that teeth sewing the Stitch in lift the the being in Plate clicks from prevent at turn closer sure Press feed Lower When it hole Straight To remove extra cover. from Straight fabric Remove pushing the Make gently plate. Note: screwdriver and Note: threads back. With Needle until Changing Plate The techniques smaller fabric especially 1. 2. the 3. The Multi-Touch Screen different guide This fingers Pinch/Stretch access & touch, Touch Touch releasing Touch Touch Touch Touch Touch Gestur Your Multi-T 3 44 hold. The function performance to more touch once with once once and & to Used zoom es position Hold increase/reduce stretch ouch Move two and without on options. Multi-T & on is in an hold, very fingers without some (zoom texts on icon icon™ Scr releasing pinch/stretch, the useful buttons and or at in) een screen releasing ouch setting machine the the pictures. or when same distance for pinch and to on a reading touch move features screen few time touch Scr the (zoom between seconds screen and your and and een areas your out). a move. Multi-Touch without finger move to user’s to the to select. touch to and a swipe Screen – are which all you is very need easy to use to use. the A Multi-Touch few simple Screen. gestures – The Multi-Touch Screen 45 button Home is be and you hold Page. to scroll will & project. to swipe Manager always gesture and Start you your where is Sewing e.g. chapter. File touch Manager the internet intructions swift the specific start stitch. Blog a the Page where used also File the Started, in a in in is from Center is that to you can Instructions Start sewing on enter menu. select This Help finger time sewing folder Getting to swipe The You button. directly info and news, the stitch mySewnet™ Sewing your connected a in every cloud Center. started Guide, Mode. the Top-bottom/bottom-top Home more be Mode Menu machine. Blog to get get product the Help folder. mySewnet™ release within Center open shown to to Tutorials, User's mySewnet™ Center is menus. the Sewing to feed. Sewing and needs icon™ latest from cloud and how Help mySewnet™ scroll Selection to post tab the age through om a Guide. Left-right/right-left Page the open open to stitch go P built-in the Help inspiration! Fr move Sewing see this to Load on to about about about e.g. to the can get Start machine view open swipe. mySewnet™ Touch can Touch Open The performance to Read Load Touch find Techniques Stabilizer Read and Touch Start Touch Read between used Start You accessible chapter. mySewnet™ chapter. The able Touch, to Swipe The Multi-Touch Screen frequently. new functions, arrow Some T Cancels Cancel previous Confirms OK The Common Touch Mode Touch Home Touch Save located The Main previous always 46 ouch following Main sewing icons at to to to accessible. just changes Switch F & the window. window. switch return save changes Functions; unctions touch Hold have below session. lower your functions F to between & and additional unctions and the the hold right stitch Save, pop-up Multi-Touch Start pop-up on on corner. Sewing or Home the the Page. functions, sequence messages icon messages screen To Mode and access Screen for Mode at are marked a and and anytime. few and used those and returns to Switch seconds. returns with start are to a are an to The Multi-Touch Screen 47 two underneath between visible toggle are can dots unction F you green control. oggle means two T It same icon. with the settings, in some settings For the Settings settings The Multi-Touch Screen instruction and Started, Help stabilizers. Touch Stabilizer Touch Sewing Touch T will Touch Getting your The Touch User’s The Help 48 echniques User's Help Stabilizer show performance Center to to to to to Center Techniques Guide read view view view access Center animations. Instructions Started Guide on icon Guide Guide. instructions how complete projects Quick your and is to contains icon™ always to enter and machines Start sew T that utorials sewing Tutorials, sewing the specific all Guide. on close have User’s the how complete instruction at a machine. information Some sewing step-by-step Sewing hand. to Guide, use of Touch User's different techniques. the Instructions Getting projects. about guides Guide. the The Multi-Touch Screen 49 boxes boxes check check colored colored orange in white in Settings Settings Default Temporary 1. 2. in a at lift to , off, of even reset to not or the the way be Settings reset thread or The position or whether start using in correct selected metering. setting tension be or pivot make saved, down raised machine Sewing will best Machine or is lowered, to and raises correct the settings. in be this be session down will and the the Default When tension. selected your thread the feature stay in and raise the is machine. will will keep Center stitch new feature keep The tabs continuously accessories metering settings; Settings Settings, in a needle will stitch. choose will foot Settings thread meter the thread. off. you stitch and Help the turning your icon™ active support to to start feature foot situations: Settings in thread automatically metering/thread specific needle Lift discs Sewing technology the not technology with by upper you selected presser technology When the Temporary for on between automatically do selected machine oot switch change the presser using F the project in the thread Default Temporary to to stops thickness machine recommend tension when tabs will with automatically that on following in in the technology for thread, your your cut automatically performance swipe new echnology session. machine. we the when the Settings: T made esser the a on ways will find foot fabric active ActivStitch™ Pr Just in of depending made made ActivStitch™ Settings Settings. your Settings: upper adjusting machine tension thread Settings your thread ActivStitch™ the two will turning stopping the a except results etc. based sewing of of for foot metering for the techniques the start tension, changes selected, deselected, the presser are default. about you if machine change best ActivStitch™ Default Settings when becomes the restart new all to Temporary Settings position. When the height. After position. For selected special Deselect Temporary control will the Automatic When thread amount Temporary Read presser even When • 1. amount chapter. When • ActivStitch™ Settings settings your There Sewing Settings Here control Thread measures tension, 2. The Multi-Touch Screen Down This Motion For option with the of Motion free-motion It sessions. Temporary Motion cutter bobbin In Pr needle When Needle needle positioning. Set Stitch Motion and Spring Choose Fr attached • following When Automatic on adjustment. pressure. Note: If • 50 is deselected, ee-Motion the esser most At eyelets. After the the use more recommended Sensormatic setting the Deselect cut knife twin Up selected, cover, button fabric. instead. up. when Foot machine Limiting of Options icon mode Options between cases, in sewing Stop needle F commands information Specialty situations: the is oot the located When needle Settings can 6D in The selected Threa This to in sewing no when entire two on will you Options Position Pr the prevent Sewing the Free-Motion, down. also to a in is higher automatic three the Free-Motion. Options essure will Down under holes single Default automatically to selected do Stitch Sewing d using that threads techniques stitch for be front your with limit in Cutter minimize not see damage Free-Motion in Mode set stitches all you the the is stitch optional Width the need the accessories width. of machine the selected Settings; new Mode. by needle the thread are number do needle the Spring to description to touching stitch e.g. When may corresponding cut to not projects and the Safety choose the machine. be accessories plate. adjust cut a automatically plate your set stops automatic risk Options; touch require selected the width sequences. monogram Foot one that will an or a the more just of or machine the with temporary select of in Free-Motion option the do breaking be and sewing that Needle an the the above presser in Dynamic thread not performed. pressure Free- Free- the the stitch are the Free- Free- or for in allow stops the Up/ size the a foot Stitch Presser Free-Motion Needle Limiting Stop Foot Pressure Position Options Options The Multi-Touch Screen 51 Up Lowered Options Dogs Dogs Feed Tie-Off 2. Feed 1. on to For to on found lowered lift all reset possible be machine be Center. for the sewing settings. Dogs extra button, at will also to Dogs, your is Help Feed when raised stitch. It foot a Dogs the selected Feed the Tie-Off be Tie-Off of a automatically the the from stitch. Feed sewing. will presser other lower lowered a end use will the of the are the and Dogs lowers project (recommended) program at always and end or options Dogs Tie-Off, new Dogs raising stitch cut Feed will you the a free-motion at of eed Down the let the raises Dogs machine. selected F Feed when is on thread when and the start and the for machine Feed a immediate of Options Select or the auto sewing. options Up For The The at all front example, depending Tie-Off These automatically buttons Select program When sewing. beginning Note: the Options Note: for Note: automatically position. auto The Multi-Touch Screen selecting the screensaver. mySewnet™. distinguish be Customize Backgro slider light Adjust LED Touch Units until shown whenever When Lock Touch Machine until attention When Audio left, volume sounds Change Audio will Select Language All Machine you even 52 useful settings left the be prefer. conditions W you the when Scr to your selected, active, millimeter to on the Repeat V changed ork to in volume is the olume the pop-up the select und pop-up when touch een make your changed. the Nickname it brightness your turning desired Light one made audio Settings right is background the The screen Image inactive a machine the owning OK machine them is in after performance is nickname signal messages to or in Brightness name volume muted. your closed. screen your language. in When make inch the and restart. less of the for for more sewing machine will the will machine from the to image bright. pop-up. is the using ten the some will for set LED automatically be screen be than icon™ All LED seconds. slider another your the shown room. be affected options. the warning lights settings texts off. repeated one measurement lights will machine. slider is machine Simply all when in on machine, A to remain when brighter your pop-up the will adapt the alerts bar. locked in working way This move by be intervals the machine All locked or to to saved, unit is or to audio can the the the to in The Multi-Touch Screen 53 be the on to access also services. in machine the account machine and machine WiFi files. will to available. the your in machine Internet machine and be logged You in cloud. in In number, sign mySewnet™ networks with files have user. mySewnet™ can always the a account technical serial the you of saved you will connection firmware. user ™ mySewnet network With all available and activate/deactivate services. a the your for change contains to WiFi clear machine can user. update all access current Settings or, the as: with can Settings to you new search and connected a you such Information cloud, cloud mySewnet™ is able chapter. about connected firmware information be If settings create WiFi Settings mySewnet™ WiFi address more about machine, to synchronize will latest the WiFi the information information MAC Machine Machine will Read able you Read your the When ™ mySewnet in In mySewnet™ mySewnet™ In connect. WiFi The Multi-Touch Screen 3. 2. 1. Touch chapter. and Started, Here Touch Help the The T Smart The Smart depending The 54 op Main Quick Help Help Top Smart options Stabilizer you Bar Toolbox & the Center Techniques Bar Center hold Center, Menu will Help T Help Toolbox on oolbox included shows anywhere Guide. find where and Center Quick the is select which and they Read available in built-in icon Help the Tutorials, in the are mode more your Smart to and option used. User’s enter in work you in Main the Toolbox Sewing the the you are Guide, sewing area Help Menu. Help in. want. Instructions differ to It Getting Center area. Center. open includes the The Multi-Touch Screen 55 Features Information Active 4. 5. cloud Strength Signal WiFi mySewnet™ Recommendations 1. 2. 3. an to or Help. your The or pop- Guide stitch chapter stitch icon A stitches icon cloud and Selection the Help. about Quick swiping Stitch, the machine. the an User’s Settings. collapsed by saved about. exit files tabs; be selected open flashes your Quick show Select about to to Touch the and Area font can your to Built-in and text of mySewnet™ stitch, open text open information the Temporary icon arrow. Area open to to chapter. the one active. the to in green information short you your to pop–up the is in a tab in connected icon organizing for tab the Information refer select want Font. ea made files gives Touch you Help Manager and Menu mark Ar will and device close information you again. Information touching entire Area Select saved to File giving Quick the by Manager the features USB highlighted or the Manager. Guide. Helps Menu Area the a OK loading in screen Menu your that File Selection question in to information. File hide Help Touch the appear Menu or the the Main the or Design User’s Quick recommendations about menu Touch Store on becomes can Manager fonts expanded activated Information left. more will the files. folder, Read and The and You the Information Touch in File Each Information Selection Touch indicating area. Some for Touch Menu Select WiFi, and Main Touch icon up Quick area The Multi-Touch Screen area Note: hide collapsed Area Note: possible expanded Recommendations shows If flashing The there When mySewnet™ enter for Shows Information bobbin regarding shows Recommendations Recommendations does Area. tab, After mySewnet™ If network network Touch WiFi Read Read strength chapter. 56 your you selected or again. synchronization again. the not Touch Touch is the more about connecting Sign do signed the if recommendations touch the machine case, in dot entire to see you is from synchronize, password. not by the presser and WiFi selected in password hide about the the WiFi stitch. account. in Troubleshooting. and/or touching mySewnet™ need to get in mySewnet™ the collapsed information the Information information icon mySewnet™ the you can any to in mySewnet™ list foot, The to Information Menu are stitch WiFi, your entire not will if to status change signal protected, of see the stabilizer only Information access IDT available connect by see machine number cloud for can touch troubleshooting. arrow. information cloud. icon icon will area ™system, available touching or account how the the be the cloud have to to Area. icon be the you by should both to bobbin selected show show It WiFi networks. much and in shown mySewnet™ swiping is Menu mySewnet™ a in in will or the the in also expanded low stitch the the the area the the Settings. create be Sewing available case. WiFi be arrow. stitch Information information speed can signal with possible mySewnet™ Information used. by prompted to plate, If The chapter. a be your the swiping. a cloud new Mode. Settings Select and It setting It green space left. is also to also or a to It 1. 4. 3. 2. Indicates Waiting Firmware WiFi WiFi Signal To WiFi Update Be Strength Installed Status 7. 6. 5. mySewnet™ Status Indicates Available Firmware mySewnet™ Update cloud The Multi-Touch Screen 57 to also the the be you is in top of the It Touch can swiping. anel touch on Tie-Off P mode by by made panel as and/or corner displayed. Information Menu arrow. placed. Area the which have such around the be choice Menu lower colored on to initially you window show it the Features is the your the to moved the in menu. of features, on a touching in be want than icon om Information changes Active by size depending Fr can hold a you or open triangle, & more The to to entire activated Panel es categories differs down the where touch Information collapsed panel contain colored shows anel Settings. the window Selected hide Menu Panel and the eatur panel P the browse needle F to the in Simply The to the menus Touch again. section drag Menu in. icon Some an Options Swipe expand window. Note: are and Area The move Menu This Options, possible screen. Active expanded Temporary The Multi-Touch Screen icon default, function When you Functions Base Touch F Touch remember which desire functions The Customize The T Drag the 58 oolbar ull Move performance lower are in and Scr you on controls to the the in. use Bar will toggle the you drop icon that x Toolbar your have Toolbar Touch een Smart to be screen. use in close open Y that it changes between shown activated our the to icon™ one View the Toolbox will will can desired the full Touch center most W of differ under be be control. screen ork allows when the full a highlighted moved and by until function, the location. icons screen depending Ar Active arranging turning windows Detach you select To ea the to around. reset mode to control open Your Features. e.g. Reset access and your icon the on them are Tie-Off it. on/off. machine Touch the to Toolbar. which pop’s machine Toolbar placed the show as active the you & up. mode will hold in to off. the very 2. 1. bottom Move Detach of the screen. WiFi & mySewnet™ Services (. a a the 59 a The file with in the the see newer be the the copy open a restart will where with at you on is find to will will not update installed. is Connect version button firmware to will Unzip number do machine during firmware. icon you Firmware screen. off. icon and there or USB This firmware shown new file. device. machine. located device. machine the unique. a the Area. portal installed. your file be computer later firmware Reverse times the that latest reminding software zip new the version machine the on be USB on not turned machine. the USB update old the Information. will verified a the the is available off to is the your of Touch the button, machine. no the Area, to be turn an several copying your is Using on detected updates. shown turn firmware name with from name firmware area. install ready for on your will Check firmware mySewnet™ is Information and Release (.clo) firmware Machine completed has not there file when the the firmware machine Reverse restart folder the the is and the file find port icon completed the Do The loaded that the to the in search stick update Information. website new is available update Information switch. the may install and change firmware USB Update machine, Check dot the sure that Settings, machine the a existing to the update hold (.clo). USB any information login e update not device in of copy the to in process. an the automatically. download file the update the latest update. available, ar sure an the and Do Make Machine of PFAFF® find also If to firmware machine on dot and USB ON/OFF in into the choose the flashing the can will automatically Download file Note: file Note: clo) update The Make the version Press front the when The restart number update When you www.pfaff.com you firmware 1. You Firmw Device Visit 4. 2. 3. 5. firmware visible installation green If pop-up yellow about When automatically. Settings, will Update. the able to pop- you can be if which connect you strength machine be and Network. WiFi networks. activate to to you in to that will Firmware WiFi, signal user visible your wireless signal need protected, Services WiFi the the Hidden Area you pop-up information updateable where available Only a low WiFi of you a see an of to the features with machine. machine in list connected, screen also have open password modern, benefit later. network. recommended protected, your your the WiFi a the or to Using is it can connect Information firmware in the is machine downloaded. network When on available. to a padlock. to the be icon from You password hidden always to signal With to in latest be connect is WiFi. network icon™ icon™ the password the download update to shown ™ mySewnet It any the closed is firmware services. icon to Update of the Network a be network & get waiting get network. if connect using enter always oduction e a to Network to Started WiFi Information latest will with ar not the name firmware chosen possible and also will machine. Intr network it Hidden the the the do able Select the performance performance can WiFi network Firmware have New ™ mySewnet Troubleshooting. about be a connect. pop-up your you 1. 2. updates to Your sewing install product. To Firmw Hidden Touch WiFi. If Touch Getting WiFi Your 4 prompted to Touch strength indicated Settings. If see A You makes up enter the WiFi & mySewnet™ Services mySewnet™ A can • • mySewnet™ mySewnet™ cloud The mySewnet™ Touch account use Start mySewnet™ Your mySewnet™ • computer on from offers performance • • does If flashing The 60 your mySewnet™ mySewnet™ to mySewnet™ will synchronize mySewnet™ machine mySewnet™ different Install mySewnet™ machine, synchronized computer mySewnet™ mySewnet™ the the choose mySewnet™ synchronization not with access three performance that a machine, sign save machine mySewnet™ simple from dot synchronize, the and registering is different to in – places: the and portal services cloud the in available to icon™ mySewnet™ In mySewnet™ register and the account the cloud account cloud cloud cloud cloud portal way your keep different mySewnet™ File the cannot Cloud Account access cloud with mySewnet™ featured a information icon™ at Services the services. to mySewnet™ pop-up machine. places: Manager which files a status pfaff.mysewnet.com. – folder folder sync through – a a the see to manage local is can A mySewnet™ your Manage mySewnet™ – connect new all mySewnet™ a A cloud to cloud mySewnet™ machine Troubleshooting. icon tool service also machine will personal contains the folder where on owners the will cloud mySewnet™ personal You The you an portal. on or the and area. mySewnet™ be based mySewnet™ sync be to the cloud be ordinary in can your for mySewnet™ will on created mySewnet™ sync performance you shown features cloud access opened files account and mySewnet™ the such login-based tool services. your hosting create files service cloud. sync find store computer tool following: users in account. on folder as with personal through web from computer the the the where cloud tool cloud. to your on your your and where files of cloud be cloud browser. a your three icon™ on on settings. a account green – able folder you in the the your files you the or to • machine mySewnet™ computer mySewnet™ personal mySewnet™ mySewnet™ status user and cloud cloud. services portal profile the through mySewnet™ you – A such and website will the manage as be SewNotice register able portal. with files to different machines, view From in app. the current the edit WiFi & mySewnet™ Services 61 in cloud space mySewnet™ mySewnet™ used the the cloud. the with mySewnet™ with the Check cloud. files to mySewnet™ in tool. to synchronize in sync tool. signed mySewnet™ Cannot Signed Synchronizing cloud. Not sync cloud the in to to your with other is the cloud first or the your computer left, fill content and device the setup wizard is on space to Sync from file your the ™ mySewnet computer the support modify USB performance delete setup to a the space to stitches to folder run or mySewnet™ activated to Cloud of on your go the until a cloud account your Add, to continue tool tool pfaff.mysewnet.com. cloud. in or on fonts, gets on files see at click you modify again, sync drive. If amount steps will space store folder topbar mySewnet™ move folder portal add, you the hard double or you mySewnet™ once. will cloud to the small cloud mySewnet™ local your a ™ mySewnet cloud a on mySewnet™ you in synchronization your your in remind in of cloud order Delete of on machine. only through on the in alert installed, not in mySewnet™ computer, Go stored full. is Computer machine. mySewnet™ content your mySewnet™ it will the When folder will sign Space mySewnet™ your ™ mySewnet the it for The from you space. ™ mySewnet content wizard. install. Once sync delete computer the icon™ Download from On mySewnetCloudSyncSetup.exe ool 3. the 1. 2. machine space, completely time machine. Note: Install settings. free Installation T synchronization The Used files Touch WiFi & mySewnet™ Services • The to can mySewnet™ access The mySewnet™ 3. 2. 1. sync Make Synchr 62 The The The use inspiration, material My access mySewnet™ mySewnet™ performance mySewnet™ synchronizing The progressing. The Drag folder tool WiFi machine machine Machine sure the to machines onize icon icon the is and following the network that on such installed portal different means is your mySewnet™ drop has will optional a you shown Portal portal – portal. cloud as File icon™ Cannot Overview no with not and computer. user’s is are the services: that and Internet password mySewnet™ connect folder as is signed file accessories is your machine your running a long now guide, portal personal into Connect of mySewnet™ in connection file as in available to your the file protected sewing at to the a and on has services. information WiFi mySewnet™ pfaff.mysewnet.com manager mySewnet™ web machines your synchronization finished also from project network to page account. computer. in Login a on with WiFi related etc. cloud account your to You the Network is on your the and Make Internet. Make Make closer WiFi Make Settings. the Make • • T r password, WiFi cloud performance synchronized personal mySewnet™ information contact My oubleshooting entered machine. network. sure sure sure sure sure to profile the icon sync that that you that that information, the WiFi files. in Also contact – If tool. have you your the WiFi cloud and correct the Overview there icon™ with router. The machine make have Information account WiFi selected is – the files is the enabled password. Possibility machine e-mail no selected sure administrator router mySewnet™ of Connectivity are signal, detects details your your that automatically subscriptions, on Area has and your If your WiFi the to personal move a etc. you access manage the signal to mySewnet™ cloud WiFi machine. network. of open do mySewnet™ the your to from profile, not network machine folder interest your the WiFi know network. your Touch cloud in with the WiFi & mySewnet™ Services 63 the you in could later. ™ mySewnet the connection. although registered on server again your WiFi are the to try space in accessible Please working accounts not a signed is available connection, is have have cloud WiFi you you there unavailable. ™ mySewnet pfaff.mysewnet.com the cloud be cloud. at that that that or New sure sure sure mySewnet™ checked the Make machine Make account. Make ™ mySewnet If have temporarily ™ mySewnet the with the with onize files Synchr synchronize Cannot cannot cloud Machine machine The ™ mySewnet The Sewing Recommendations, Sewing create In Sewing 5 64 Sewing Sewing your Mode Mode own Mode stitches you – Information Overview can – Intr and select sequences. oduction stitches, and Active adjust The Features selected and sew are stitch them. shown is shown Use under Stitch in the actual Creator™ expandable size in feature the Information stitch and field. Sequence Area headings. Creator to Sewing 65 Features Repeat Edit Information Active Stitch Stitch 5. 6. 7. 8. cloud Strength Recommendations Center Signal Help mySewnet™ WiFi Sewing 1. 2. 3. 4. Sewing 15. 14. 13. 12. 11. 10. 9. 66 Free-Motion Tie-Off Full Balance Sequence Stitch Settings Screen Creator™ Options Adjustments Creator View Options feature 21. 20. 19. 18. 17. 16. Main Quick Menu Load mySewnet™ Tapering Stitch Menu Panel Help cloud folder Sewing 67 is it It and touch The you swipe from you Menu Touch A stitch. touch touching Mode. where stitch simply anel available entire prefer, a stitch. it stitch. new you by P Mode. a if the The you horizontally, load screen, If Sewing move load to default desired view to to Sewing Sewing the to Menu category it listed to corner. the a the top on the expanded Menu default. be are the load Panel be with to by lower Select select to m enter panel Main can around to the tab. Menu and Fro stitch subcategory in stitch loaded categories enter a a the colored is to Menu moved placed. in Stitch Started Sewing window categories. the stitch be be Stitch touch different triangle Touch stitch to on a a Load Start more Menu can stitch it the possible then set Selection see hold select drag also to and stitches. Panel straight can Stitch the Available & want Touch Load Getting Touch Sewing Menu Note: stitch cloud access Touch Load Available Touch Select Touch Touch to and to Mode with stitches. 68 step see then a The file Panel. folder more without stitches stitch Main Main & LOAD between a Touch a hold touch mySewnet™ to Stitch stitch Stitch categories. load Menu Menu or description. to on that the a on a categories the open stitch it. subcategory a from a preview. and to stitch you stitches Fr USB open cloud selected om to Select select have to device. Use see File are the folder load the in saved a a the the to listed the stitch Selection preview Manager category view it Touch Selection is arrows File selected directly also in horizontally, in Manager your the accessible Sewing and of by Menu in available the subcategory. to mySewnet™ the touching hold Sewing stitch Menu tab. tab preview Mode. in on swipe to the the it Sewing 69 Plate Case Needle Bobbin Recommendation Recommendation Stitch Stitch Foot Recommendation IDT™ Stabilizer Straight Straight Presser 2. 3. 4. 5. 1. if the and in Area. different Straight straight shown stitch shown a the Guide be The be shown: with will about be will selected Information left. you Stabilizer Case can the the the Stabilizer. selected in to on The gives is and Bobbin use information stitch shown you Option system recommendation Stitch are depending that detailed straight automatically recommendations Plate IDT™ for Recommendations Straight your Free-Motion setting. foot, The Needle a machine Center move following recommend Help We stabilizers. Sewing Recommendations you Your recommendations Stitch when stitch. current Presser The Sewing temporary the will control temporary Deselect that except We Active Changes Settings Center amount thread your Settings 2. amount measures Thread tension, will control When ActivStitch™ 1. There Settings your 70 Temporary Default ActivStitch™ recommend change be do machine machine are the when Features tension, or saved, for the not metering of of based will will the made start two the ActivStitch™ Settings tension thread adjusting settings. settings upper support depending ActivStitch™ be be using in fabric Settings even off, will ways on of in the reset reset in that automatically Sewing a Temporary your thread, for technology T all the on – automatically new tension specialty to echnology when thickness thread to Settings you thread to at changes the the switch Information – change selected on the default. sewing Settings technology selected keep upper by turning the technology metering. discs start metering/thread techniques thread made to Mode Settings feature to made active your this and thread stitch session. thread. of meter will made choose stitch. your a setting Area. in settings. metering continuously in feature new stitch keep is Default and are Temporary feature tension. the in machine selected or When When the project Temporary shown settings. selected the correct and accessories is best or tension, Settings selected correct in turning using whether The or thread off. way the in under not Help to in 1. 2. 1. 2. Thread Temporary Default Thread Tension Metering Settings Settings in white in orange colored colored check check boxes boxes Sewing 71 Options Free-Motion lift in the the and the to the in the or Your and height. are between performed. thread features down raised free-motion above free-motion position Settings lowered, that raises be in in pivot be all Mode. in select just to disengaged. stay will Active down will For is can monogram sequences. sewn both automatic plate in automatically needle a cut will raise plate. automatically be Sewing accessories foot Lift the You and under cut the e.g. in system to foot can situations: needle automatically Options. needle are thread needle oot lower with F icon the accessible Cutter optional presser stitch effects. shown the the stitches IDT™ in will damage manually. presser are in the are machine stops the automatically threads machine ead using with following the single holes under esser cut Options Dogs automatic a Area. the the that fantastic will Free-Motion prevent the your moved Thr Pr two when no Options Free-Motion to in be Settings on Feed sure machine located foot the thread situations: commands stopping create a sewing in foot the the cover, selected, deselected, selected, touch to must knife cut different Deselect Make if Information stitches eyelets. After After position. At presser When ee-Motion deselected, you position. mode three sewing attached bobbin Fr All If Free-Motion • even Automatic When • Note: cutter fabric the Note: When • When presser following if Temporary Automatic • Sewing Note: setting remove Getting cannot activated selected will When Needle the of Note: twin When T cannot Stitch safety position straight When Stitch needle positioning. Set Stitch setting remove Getting width selected. selected stitch using foot the needle, 72 win the the use Active be and needle. The The Needle position an Needle twin will the a selected, safety again again any any when machine Width be be given Started Started of Plate presser twin stitch or twin Limiting e.g. needle When accessory setting setting all used deselected the Straight Features automatically accessory accessory to needle after after This twin straight will is sewing needle the needle deselect entire Plate to Safety of or or attached. foot with the a plate. is is to prevent starting starting option all a a twin will be needle reset reset to Stitch new new stitch that machine is will and that that stitch stitches disabled Options size stitch size stitch with limit as attached minimize Select it. needle sewing sewing at at only long show to requires requires needle When width Needle is a a sizes damage be to the the accessories width. the new new width keep presser selected, prevent selected are will stitch supports start start as as size stitch session. session. that will to project project. safety stitch the plate. the limited it stitch this this Plate only safety. the to of of cannot is width a foot. be Straight risk a a width damage the setting setting the selected, twin when machine width new new or Always Always In disabled that or allow width a is according centered needle, Stitch of stitch session. Sewing removed select safety be needle project project do breaking and the or or Stitch safety a used to safety make make the not select select centered width and width Straight the as stitch the when presser Mode in in is needle stitch allow they with you to size sure sure is the the a and the a to to Stitch Twin Width Needle Safety Sewing 73 Up Lowered Position Pressure Options Dogs Foot Stop Dogs Feed Tie-Off 2. Feed Needle Presser 1. on to by Tie- to foot For of to on stops Your found lowered lift all made open reset the front pressure possible be machine the presser be be an for the sewing Center. settings. the Dogs extra in with button, Beginning, at also will the machine to more Dogs, your on also window. options is Help Feed when raised It the foot require stops can your stitch. Dogs the selected Feed the Tie-Off adjust be Tie-Off a Tie-Off Features three button to a automatically may of the the Options from stitch. Feed sewing. will presser other lower lowered a setting number icon, use will selected machine end need Active the of the are is and the Dogs lowers project Dogs This (recommended) functions; Tie-Off the not program always and end your Up/Down Cut. or essure at Tie-Off options techniques under Tie-Off, new do Dogs raising stitch Feed will Down you the Pr Position eed a close free-motion higher cut down. the F at of Down to the let you the selected raises Dogs machine. different Feed Needle when Thread Area. oot selected The is shown on for When F when and the Stop is start and Options Specialty the machine Feed the thread immediate needle and of Select are or cases, select up. the Tie-Off fabric. touching Auto Up sewing. options Up For The The the at End machine. all front the you esser most let Touch example, program When Off settings Tie-Off These depending beginning Information the Note: When Options pressure. adjustment. on automatically buttons Select In Pr When sewing. Needle Note: needle with for touching the Note: automatically position. auto Sewing select reset satin decorative stitch positioning the The straight machine position adjustments. Changed width your machine pop’s & show desire functions The Note: Touch adjusting the If the Increase Stitch The stitch possible On Stitch the Increase Stitch Touch Stitch 74 lengthening hold certain maximum entire control. control. stitch performance number the machine stitches The which length to Reset up. in on Stitch Stitch the stitch). the Length Positioning Width in to or or Toolbar has will mm. Default stitch the selected you Drag Edit stitch position stitches stitch, Move mm change decrease decrease The The will Toolbar. left controls above in a Edit Edit will sewing remember use off. stitch a maximum mm. and position in and will number number stitch also Setting to icon the icon™ to to remain Touch the relation stitch. the can with the default, drop close open + be width. If the the limit area. entire that most in where to stitch lengthening only control longer is a your may stitch stitch allows above above the move the it the of can the the width the always Touch to to by stitch Changing be use 37 center position. x the same. center limit control control changes be desired stitch but length width to arranging shows needle changed the the the you Smart less moved density close shown the will the the stitch control control until a needle width to than using zigzag Detach window. window using the location. Use density be the positions when stitch the Toolbox access in to around. the to can stretched them needle 9 stitch white – control. adjustments. the shows shows – position. the – mm to stitch control width turning icon and be and the of for limit move as right. Your and numbers. adjusted, (for it the start Touch + you to + the stitch is or To out. in in of a The the a set Sewing 75 Side End to to End Side Mirror Mirror 2. 1. the and how or make stitch e.g. manual actual of a touch sequence the that mirroring. the (the the about effects decrease for mirrored. decrease decrease stitch to repeat with be to read shows number to + affect - or stitches to chapter. visual density sideways, the not shortcut mm. the cannot a how End. satin using set stitch Touch control control in a to does repeats. by different buttonhole and can open the the buttonhole, a sequence adjusts get Techniques to End in Foot. you density. to stitch + mirror stitches length buttonholes density individual above Length of stitch or threads. To the stitch. manual sewing – slit Repetition e.g. Mirror control or Toolbox the satin Sewing a The buttonhole density button, Slit the Side. a the sew entire when the number Buttonhole number to touch stitch Smart in speciality increase stitches density a stitch). Stitch the between between manual also the Density to The Touch the buttonhole Side a of – sewing oring Some using can increase stitch Use Decrease entire the mirror sew to Note: to buttonhole When repeats. Button when lengthwise, Tip: Set + Sensormatic You increase Buttonhole Touch the length To Mirror Mirr The distance density. distance Tip: Stitch Sewing Your tension Note: upper you tests best Tip: another increase thread, adjust Use on between selected engaged. Temporary Deselect special the When fabric, amount measures Thread automatically tension. control fabric, If Reduce If the For Adjust The ActivStitch™ Make thread For Increase going 76 the the the correct threads the decorative results Increase ActivStitch™ the are with changed When upper bobbin a to thread thread the current the the should setting, techniques stitch. the best e.g. metering few Thr the thread going of To the when the use the thread When the different balance thread thread when thread amount needle changing get thread decrease meet Settings ead tests control stitch the thread thread ActivStitch™ and settings thread tension and fabric use to be the settings using stitches metering/thread the thread metering the sewing T use check on evenly automatically visible tension/thread tension/thread ension/Thr changes for T the appearance thread between thread: technology may tension/thread best settings of is echnology tension/thread ActivStitch™ visible thickness to a is the and when will heavy the is visible bobbin metering/thread tension scrap visible ensure and and on the sewing used, require value between on be selected check metering and only denim thread technology in using tension. the buttonholes needle reset weight on the piece on of thread. Sewing the on to on that thread and affect feature ead a loaded result underside the the the and the fabric to meter scrap tension the the metallic metering tension metering metering the of stitch. technology metering. thread thread durability default thread when thread. balance use metering. Metering underside the continuously the top upper tension two tension Mode it has with piece stitch. feature the selected of will the fabric side control possible. metering/thread discs when fabric thread tension thread and two of correct thick Make and is is thread. between upper will of setting the of depending too too make feature bobbin you in of ways stitch. will the selecting thread the threads. layers. to change fabric. and tension. the tight. loose. a is fabric are few Some keep for sure to the is 2. 1. Thread Thread metering tension Tension Tension Correct too too tension loose tight Sewing 77 Free-Motion 6D Foot Spring Dynamic a is use stitch must the the raise for 6D features Settings. open the local the Foot stitch each in to different on Options free-motion will fabric Free-Motion the Foot your Free-Motion in sewing with Active the at Spring measures foot damage three Safety disengaged. fabric Foot while formed. is ee-Motion and sewn Spring recommended Foot the lower under Fr might is be Width spring Free-Motion Sensormatic plate Free-Motion being purchased A between and Spring Dynamic if 6D system hold 6D can free-motion is be the in in Spring needle shown to Stitch Dynamic foot all feet. Touch Foot raise needle can select the oot are IDT™ the F stitch close -Motion For automatically stitch the feet will can machine to Options the spring dealer. for since the Area. Activate spring machine machine Spring a effects. Dynamic on Free and each you that lower settings the the your foot. use spring The Options. mode Spring while stitch. on set set fabric oot will sure not with manually. PFAFF® F optional activated, Your Dynamic fantastic to to where the is Do presser plate Free-Motion for thickness Information formed. Make The Optional Dogs straight lower stitches ee-Motion moved create the hold Activate window Free-Motion. Spring to Free-Motion be Touch window. in Dynamic Activate Free-Motion fabric to mode and needle Note: Note: Fr All Feed being with Note: authorized Sewing Sewing the activate Note: • • Note: information settings Touch Off program beginning Press No • let When These Tie-Off The Note: increase and motion To stitches. presser presser down higher Activate Sensormatic Tie-Off Skipped while on will When mode To e.g press 78 stitch. automatically When machine action Press you The go you the adjust front Tie-Off yarn End fabric change raise the the Stop For Be back sewing. for with options touching sewing needle Tie-Off speed, Tie-Off End. start select reverse mode, foot foot are with careful of and Reverse couching the or Reverse stitches to immediate Thread The a indicator must presser and the to sewing will the and Thread Options decrease set the will shown presser The to and height Reverse area. sewing Thread different presser Tie-Off needle machine. plate the lower free-motion allow open to sewing. be sew. the still Beginning at not needle the action button. finish button the can cut Cut performed. close and the foot presser Fr etc. machine to Cut move lamp Tie-Off, under will forward, while Tie-Off foot the fabric with presser you ee-Motion Cut. the button and occur reduce press end foot at 6A Options The indicator as the Tie-Off functions; when is No reduce the Free-Motion freely height threads will program you programmed, presser or of foot each the will Active height reverse stitch the at and Tie-Off if use icon, end the in stop to a some foot sewing your low be stitch are Reverse stitch. under floats be Sensormatic options perform the stitch presser lamp selected the eliminate by of lit sewing and after three in height. features performed foot indicator stitching. Tie-Off speed will Tie-Off other fabric Tie-Off a touching to space Sensormatic is in the will stitch. over It do to options indicate button being will performing foot reverse be is window. options in presser hold Tie-Off the the the sensormatic be performed. moves also between the Beginning, button, the in reverse height lamp raise. at lit. free-motion Lowering machine presser Tie-Off. formed. + twice the as the the skipped window fabric to possible that or foot. open will soon End. activate up Your too fabric free- found — and to a the the and be foot to much. to At as The Tie- foot, will the lit. to on Sensormatic Reverse Tie-Off Free-Motion button button Foot 6A Sewing 79 an and many program how to Program you sew. decide chapter. to for you Patchwork want lets Repeat possible you also it Stitch it Repeat, stitch the a makes in Stitch length, of Repeat Stitch Repeat stitch about Single Read repetitions Stitch Stitch exact Sewing return touching file file name Previously Read To In between Touch new touch create folder If OK shown. file screen. the corrected. When Balance Manager. keyboard To Save controls. to Adjustment Touch Start technique, 80 you match List cancel save Multi-Touch name type. to to folder. by about the & the a want confirm. sewing to to the Balance View In Name new your Stitch sewing hold showing open When In your Sewing Close. folder and the mySewnet™ and the List the saved Thumbnail organizing to window. each folder, file, save on Save a on touch your sewn balance save it, and in you thumbnail the The with the Screen then Mode. special the stitches, touch file the process, pop-up Thumbnail to stitch file sew simply sample Save folder OK Base the is files Change name a Cloud may your using View shown folder, and the again, in fabrics keyboard pop-up on sequences Bar in image you to the close touch Save need by your a saved a folder a each open the pop-up the to piece list pop-up View with touch using the can or the button, open to keyboard of file will Create preview or file doing balance stitches it and choose or be the the of pop-up icon and/or as and & using the will close is to the adjusted. scrap to hold touch thumbnail file. file shown located a New + a confirm. to save Balance appear USB on special to and will in and the name and toggle window on fabric. fonts save File the OK. Folder, into - device. be with touch the you below in screen and on To are your Then icons. the the will the the by 2. 1. 5. 4. 3. Save cloud Save Save File Selection Name to to Current Folder USB mySewnet™ Area Device State Save button 9. 8. 7. 6. View List Create Close OK and New Thumbnail Folder Sewing 81 for and and feet and the select point end corner the fabric. button. stitch the to a width. stitch you point a tapering. of and if touch tapered stitch Off presser machine selection both When tapered satin stitch Tapering end beginning Reverse next when the for satin stabilized visible tapered selected tapering. your or taper the the without and in the stitches. the of desired, special the be stitch. for on it the the beginning end as visible not at both Select satin stitch beginning degrees tapers with for Touch piece touch the cise some used sew - be a on exercise long will 4 45 er the be selected beginning end. stitch will as on touching will start Off Ex sewn, angles Up/Down the is the regular can sew the stitch require by select menu a continue selected. of at satin will ams to stitch in is a to and taper be Stop been will with commands and stitch may satin automatically machine angle This view Stitch ogr end. has taper will 4.3.6 satin a with commands the an fabric select The satin Stitches tapering points Pr tapered Needle Stitch and will machine Try Tapering continue open the you stitch stitch be button. Tapering Satin any length and your sew. Select If techniques to tapered The The stitch. buttonhole. to continue the can then accessories. stitch Taper Tapering a the Select Open Activate When Turn aper apering stitch. Note: The remove end, desired e.g. and that area. corners The T and menu tapers. lettering. of 1. 2. beginning 3. start then 4. Reverse 5. satin T The Sewing These Sewing Activate Note: using millimeters The length. seam Program reverse desired possible repetitions exact the The taper Combining Combining Repeat repetitions The Single program The P Stitch Stitch will repetitions are of Once set until sewing. desired Toolbar To repeatedly. control. patchwork activated Program 82 atchwork repetitions program screen. the shown number seam Single Patchwork stop the The seam will you and the Repeat length and indicator length. stitch Adjust The and Repeat to tapering last Stitch automatically an is is Tapering instead. +/-. is automatically last have above Stitch repeat of of is seam length, activated. inactive. This Tapering select is now exact a reverse select of repetition shown makes a the using length of shown repetition stitch Pr repetitions When the stitch set Pro Program the is is programmed Program will the stitch Pr as Single stitch ogr The a is Patchwork very the it length shown tapered the length, stitch. included gr indicator The described it in ogr also and +/- above and you When increase the programmed am length possible ams the of you when +/-. useful length be of Stitch Single makes am and press lets Reverse Patchwork want the using in lets and working the repeated touch want the seam The you in millimeters you of stitch the the on Program. the you when stitch in Program. that estimated and the the for to Stitch +/-. it a the number start the estimated Tapering. repetitions to stitch, with decide Stitch possible sew. button light repetitions you Reverse decide can the is +/- area. sew. length Adjust with is quilting. machine Programs sewing finished. program the finished. Single to until be controls. Repeat Sew the Set how above of Touch length is The program the how sewn same for of button the pressed Sew repetitions length Patchwork the are the shown your again same your machine Stitch will many you This is many length makes on the Stitch number in your sewn. length. end now be while of to the an on +/- the the will the lit it Sewing 83 Foot Position 5M Start Foot Buttonhole Buttonhole Reverse 3. Repeat Presser 1. Buttonhole 2. Sensormatic the foot the lines feet lid. long the them button many of the the Manual As is the the threads the as below The can manually. column. by 5M. thread. threads pull it buttonhole. arrow over Buttonhole and the on ends presser use under You of the foot red gimp Reverse and that repeat the copies. gimp gimp 5M. icon. hidden button. second ruler sewing so thread the the Sensormatic the Repeat ends is back special professional will want pull the buttonhole the buttonhole with Foot a button. Tie needle the presser Start that a The regular gimp a press the you button length identical buttonhole, and some the automatically thread center of use thread or have as sewn with sure foot. the of into Start/Stop slit of machine deselect sew the the again. your sewing are or and repeat the garment. the to long buttonhole, size the aligned, Buttonhole length require cotton just bartack make loop using on thread. as Pass a over can that the from the Buttonhole the threads are when icon button. the completed of bartack. the of foot. and may buttonhole, control adjust buttonhole pearl 5M. and durable adjusted You be a Buttonhole Manual than button excess the selected, echniques gimp function sews side wish. column until foot Use T marking visible is center cut. of Foot Foot, over will bartack. have sew the length second Manual the Reverse columns extending the the stable, manual Buttonhole your Buttonhole the a you the first buttonholes the are larger of completing on a Buttonhole slit icon the only the you you the techniques front wrong bar as thread ed is the accessories. cut machine more the with cancel sew that the sew the Place Snap After Thread To Cord Corded are appearance. 1. When Repeat pressing threads times buttonhole icon metal Buttonhole to Manual To 2. and up buttonhole Repeat as 3. Sensormatic When Buttonholes Sewing These slightly measure Sew Touch When to gimp to and The 4. Buttonhole Set buttonhole Sewing new the program Repetition To Use F that If aligned Mirroring Place lowered. button To Sew The sewing stitch without width appropriate subcategory 84 our needed, change sew desired starting the will direction the designs. On between Dir sewing. on mode. with Four having fasten for button icon increase a ection direction icon. a length for button, point 2, you. the Button Direction by When the to the The holes the to Start under swing touching make is turn is Four button or actual Feed Sewing remove touch marked sewn selecting with to decrease stitches the your of sure Direction sew. Dogs the button. on the one in one presser the the fabric with The one the needle Width a of will of the for presser stitch holes fabric, direction, the machine the If stitch an sewing number foot or automatically needed and four x icons. four for in in in holder. foot is using the category decorative the the stitches. loaded directions. on will of select change and button width stitch patches stitches the sew Use select to the be Stitch 9 When field. the the the is and are Sewing 85 top For to the sew on pairs double to fabric your of stitching the (approx. woven starting and Ribbon locate ⅛-⅜”) sewn how stitches stitches. your are combined/ mm be Ribbon, performance on and using same consist for to as support single Triple 2-5 Edge second, the to your decorative when (approx. for ribbons Stacking and colors settings. such Center in the sew. use Lace stitches like mm the your to fabric two designed sew you instructions of to and Help appropriate in look correct Double as 2–10 Narrow stitches are stitches sure for your echniques one use then the T Stacking Be to that triple recommended Radiant and and get Single, stitches elements The stitches under first. you stabilizer, includes Projects are machine. For the decorations Technique Help stitch the stitches Stitches use Stitch Stitches your special Floating, weight, each. stitches. beautiful what first in ribbons Stitches other. Stitch stitches. machine Quick for the dimensional and the beautiful results, these automatically recommend each matching of Sew overlapping point preview stacked. Touch ⅛”-¼”) Stacking of Sew stitches into ribbon best Stacking icon™ with type stitching. We Ribbon and Add Ribbon Special Special Stacking, Sewing 3. one 3. 2. 1. Sewn 2. 1. Sewn sew with ways connecting Floating Floating 86 Once foot. Once sew Attach place Place IDT™. Attach outside stabilizer Fold piece two the to with with using use the stitches Bi-Level pieces finished, finished, a two of the Let the stabilizer 1A the stitches the Stitches this fabric, folded underneath, pieces the 1A Bi-Level the foot: Bi-Level folded of technique; create Guide desired foot fabric folded pull pull right are fabric. of underneath. edge. and fabric, the the invisible. Guide a Guide together. Foot, sides special edge seam making The fabric fabric engage the right a Foot together, Foot: follow second first allowance. piece effect There over. flat. sure the and sides technique of the IDT™. technique where it are engage and stabilizer together, extends guide two place the Start is the different of to is and the the and to to sew Sewing 87 Icon Feet Optional in will the and foot and the using with presser the on stops. stitch and extends the presser desired of fabric the sewing foot allowing presser be stabilizer lukewarm stitches Attach machine the stabilizer. for to Make projects in your selected guide stop the engage special Start/Stop machine markings on special in presser stabilizer lace garments. the the your the placed. and soluable soluble beading shape. reached side on stitches the the the underneath PFAFF®sewing pen, on be Touch built which require stabilizer touch of a any machine. until Foot to two follow have that water water edge. Start/Stop out want in line. function. then special the stops. sew have stitches you sure and edge stitch marking find you stabilizer Guide Exclusive place and sewing soluable a fabric touch marking pocketlines that to and as drawn the techniques Down an stitches until or Edge Foot and candlewicking, the so Stitches and fabric Help you includes stitch. of area stitches machine the as are water using making long 4–6 center folded want Stitches Bi-Level line. Lace These eet from as the that line fabric fabric time the Guide Needle fabric F the Quick it the line, a such Stitches folded step These the Start/Stop you for a necklines the the selection the Sew accessories. up stitches matches until backwards. next the drawn Edge foot. sew Touch stitches. subcategory beautiful to and Bi-Level IDT™. Fold underneath, outside Attach Let foot. remove Dissolve water. Draw where 2A Place foot. Activate sew Repeat length. Line sew Turn foot the Touch The stitch required is 2. feet Note: the This Optional the 1. 3. 4. you beautiful 1. Sew techniques edge Lace technique. 2. 3. 7. 4. Radiant Radiant 6. 5. Sewing • • before The runs The When Bobbin Pop-up • Remove pop-up Check in When control sewing need message 88 the Sensormatic Sewing Sewing folder. Sensormatic Sewing Sensormatic machine out to pop-up. the the doing Upper and without replace message Thread Sensormatic or appears bobbin bobbin a a an breaks. do Messages buttonhole stitch any stops adjusted Thread not Buttonhole Buttonhole the Low replacing and Buttonhole giving of thread is that close automatically Re-thread bobbin. replaced the start Buttonhole buttonhole is following: that you the is not the sewing. running Foot. Foot If pop-up. can in Foot notice a with you the bobbin, buttonhole. in Sewing not if upper needs want a Foot saved the the that low, full be touch mySewnet™ upper sewn to one, you to thread, a without continue pop-up be the will touch with removed thread close foot soon the the cloud OK the Sewing 89 and not the twin and size manually. you on stitch it a Needle following needle when deselect moment the a thread appears the choose needle. Threader and and Wait Automatic OK you appears twin Check pop-up OK activated, threading. the Needle for is when touch this safety. sewing. touch message Press correct and enabled. Safety stop suitable is width needle, for appears again. to Automatic it not needle, stops pop-up Safety settings. Width the stitch need Check when twin regular button the stitch for a a Use message a in you Width Stitch OK Needle machine following the using using If Attention! When pop-up screen condition. Twin The choose Stitch suitable touch If needle Threader Cannot If Sequence Creator stitches In Sequence 6 You Creator™ 90 Sequence Sequence can and see feature how stitch Creator, Cr long can fonts eator you also your from Cr can be actual eator — the inserted create machine, Intr sequence and in oduction adjust a sequence. the is in mySewnet™ a the sequence information You can of cloud stitches. create area. or from sequences Combine a USB up various device. to approximately Stitches 9mm stitches, made 500mm in side–motion Stitch (20”) long. Sequence Creator 91 Window Stitches Settings Width Between Step Stitch Stitch 4. 5. 6. Overview cloud – eator strength Cr Sequence mySewnet™ of to signal in Sign WiFi Length 2. 3. 1. Sequence Sequence Creator 15. 14. 13. 12. 11. 10. 9. 8. 7. 92 Delete Duplicate True Full OK Cancel Keyboard Stitch Stitch Screen Size Settings Length View 23. 22. 21. 20. 19. 18. 17. 16. Menu Load Load Load Sequence Directional Mirror Mirror Stitch Font from Panel Side End Commands mySewnet™ Stitches to to End Side cloud Folder Sequence Creator 93 is can the to will add. stitch fonts in to & cursor a drag Panel Menu Touch to using and arrows font you then more the a total between select the letter and position stitch the touch at cursor create and in Menu want see or letter stitch. stitches. and possible The it a a where Available Available to To Use the is Touch it shown touch sequence you stitch/stitches active font it at placed stitch simply desired entire add add stitch font. are a the Mode. you stitch. The be to to swipe more. move available if The Sequence letters touching desired placed to selected sequence. sequence. will see screen, select the a by want want selected the sequence desired be selected to Sewing through top a desired the the the a the sequence of with corner. the to you you sequence. to in view will select the on it expanded touch the it stitches It to Only horizontally, swipe panel the and sequence. select cursor category in be sequence, sewing lower a to and load to add where where a select number the the it letters, can the to around listed green. cursor placed. anywhere Inserted and Started in colored Font and The When a ont in Select stitches are load be cursor cursor F Stitch from vertically, Move stitch of by the creating subcategory to a a keyboard through moved a Panel the the Load a and window Stitch it a on sewing be arrows. arrows. triangle listed eator start adjusted. marked step to start are open position. the number the the can want touch Move Load be Touch stitch hold position. Load Move Cr Load categories categories. touch Getting To Menu sequence be Panel marked Sequence Creator Touch and It exact Note: selected sequence. insert To Replace want To Duplicate and move If Delete You Adjust adjustments density 94 will you replace duplicate the touch can Make to number the the be want & copied or duplicate. stitch. mirror, hold a text placed cursor new Delete. position a your a Stitch to stitch; work a stitch a Stitch of to delete stitch. stitch, and adjustments Stitch adjust at copies to get Touch just Touch the includes simply the of or a stitches a move the pop-up or cursor like stitch stitch length you Letter or & the selected Letter select in the hold the on want Letter or or Duplicate Sewing position. and where the adjustments. cursor letter, letter to it, to stitch stitch. width delete touch insert. you you Mode. touch to before icon the The or can Delete the want change the to stitch whole duplicating enter copy to stitch and delete you the the the or 1. 2. Mirror Mirror Side End to to Side End Duplicate Delete 3. 4. Stitch Stitch Length Width Sequence Creator 95 Stitches Directional of at and you or in pop-up. access insert length sequence. to a a the angle different shapes in sequence stitches stitches 16 with Panel new the duplicated in touch which in move stitches Menu used to stitches create select directional the be deleted, selected, to can in inserted be is the can between be straight possible you Field can it and are angle will and Stitches closing Stitches borders. Stitches stitch. Stitch 1mm makes a stitch Stitches position. Directional intended without angles. one insert directions Directional the the large-area stitches to Directional and ectional Directional cursor directions. Touch want When Touch various approximately different icon Dir Add wider Directional the The mirrored These Sequence Creator you Note: performed and sequence. a Move to Insert several it’s you This Insert sequence. You Touch T Use sewing the into You Sequence 96 rue command. Tie-Off original sequence program the it want the can can is The the a a also True useful rows. it. Size Thread Stop Tie-Off sequence. insert insert commands cursor to and This shows in size. Size them. sew Select command and the for Cut the Tie-Off, confirms Cut command Commands if to it example sequence. where will These Tie-Off you the only it the will command and always threads position want Stop if appear once that the commands an you at commands if and command you icon the the the or be want on if and where to end sequence you Thread command performed want the will create raise the will screen of want be anywhere a you will the machine secure the Cut added be a to the sequence in sequence want is be included when presser commands return the inserted machine Tie-Off. into in to order to the stop. add to foot. the in if in 3. 2. 1. 5. 4. Cut Tie-Off Editable Tie-Off Sequence Command End Beginning Stitch Commands in Green Sequence Creator 97 and List Folder View Between New OK Close Create Toggle Thumbnail 6. 7. 8. 9. button Save 1. Device State USB Area a mySewnet™ Current To to Name File Save Save Selection Save 4. 5. 2. 3. 1. or by by will on Then the type. List create can button, In you name file folder the hold To OK. the Mode into Manager. pop-up you & a window file and sequences and folder between File icons. save save. using cloud using touch and in to Sewing touch with close pop-up new file and file name pop-up and to toggle it files stitches, it will to file button the save your your shown simply create pop-up thumbnail file. open load the is the ™ mySewnet saved button. as saved Save the close View the to the In keyboard Creator. name pop-up or file Name the in OK with the folder, of your the to a list touch then the OK folder save a each to Creator. sequence, screen. process, file it, touch in shown. image the shown Previously using The Sequence Thumbnail Sequence the the save is touch touch View Sequence organize on simply save file, are in stitch files open to on to a and file to and and the save folder Close. OK Sequence the device. our hold your fonts your to Y List to folder, want how & thumbnail the each folder. appear a USB folder sew cancel save Thumbnail a you new Learn touching return Sew To To touching choose to touch View and Saving To and/or name new Touch showing In will keyboard If the a keyboard Sequence Creator affect in In Mode Using Sewing touching To Adjust 98 the Sewing adjust the sequence. chapter. OK. entire Sequence the Mode the entire Adjustments sequence. Use Entir it is sequence, the possible e arrows Cr Read Sequence made eator to enter about to start in step sewing Sewing sewing Stitch in through Sewing mode Mode Edit anywhere the in by will the If sequence. sequence. Toolbox Note: Sewing again. Sewing will you be Touch want Make highlighted. to Mode. Mode access In and to your Sewing touch edit Touch hold Edit adjustments each Touch in the in Mode cancel the Sequence stitch sequence stitch to you to enter in and undo. field can Creator. the and Sequence touch edit area sequence the your to OK Edit open Creator entire to loaded Sequence the load Smart it to to Sequence Creator 99 199 to to up appear. stitch up stitch exceeds be stitch will the Reached a can special in contain make Been sequence and and message insert Sequence will Has sequence stitch to long in Sequence add the pop-up in to stitch If (20”) Stitches buttonholes stitches. possible this of mm Your trying Added not 500 4-Way are be length are example long. as commands. Messages Number you for too and such Cannot stitches stitch maximum eator stitches the sequence approximately The Cr Stitch Some Pop-up sequence, menus Maximum Stitch Creator™ Feature To you The create In Stitch 7 100 theStitch open width to Stitch a create stitch Stitch Cr of Creator™ the your eator™ all Creator™ Cr stitch on stitch. your eator™ feature, field Your own F feature, eatur is 9mm or stitch you alter just can F e and can eatur touch – already create maximum Intr be saved the completely oduction built–in e Stitch to stitch the Creator™ stitches mySewnet™ length new stitches or is feature letters. 5mm. cloud and The icon. adjust folder grid or every and to the a single USB vertical device. stitch center point. line You will can help Stitch Creator™ Feature 101 stitch) current (shows All Select Arrows Preview 4. 5. 6. Overview – e eatur F cloud ator™ Connection Cre WiFi mySewnet™ Multi-Select 2. 1. 3. Stitch Stitch Creator™ Feature is If deselect is Note: stitch marked Use the touch To Multi-Select If Select number current touch To between selecting To Select point Each points. through A Definition Cr Getting 7. To The stitch 15. 14. 13. 12. 11. 10. 9. 8. 102 the the white white stitch select mark select select Move Triple New Full OK Cancel Keyboard Edit Zoom position, eator™ next first the stitch If icon icon is points point Multi-Select the All selecting them stitch Screen indicated Up point stitch it it is stitch the number Stitch will Stitches/Stitch the the a all more Wheel Multi icon. Slider Stitch is is is is the stitch point arrow is Started stitch fabric. deactivated. deactivated. by previous green, green, after Y=feeding stitch automatically position of indicated is point total point. than Point View touching stitch Select the with point, a is is the by points to and points Stitches number indicated it it Stitch the point and one select an means means points marked Stitch or icon is then marked just length) by the outlined stitch the with shown next at next where stitch a and Down are the touch be using of Position Point Down touch that that filled by stitch Points stitch point, stitch selected to connected same use stitch between Stitch a the points it it square the arrow. the it dot. square the is is arrow the point on point. points. needle the Up marked (X=stitch time, activated, activated, point. arrows A screen. as arrows. before (A). arrow, stitches selected the in to (B). well. by touch goes The your select A arrows. stitch stitch to If needle the you marked The and and select second in the stitch, stitch the can point, if if it it 23. 22. 21. 20. 19. 18. 17. 16. Stitch Load Load Mirroring Mirroring Delete Duplicate True Size Stitch Font Field End Side to to End Side Multi-Select Stitch Creator™ Feature 103 All Select it If of if will see stitch the the stitch your and on you field change. again. the select zoom, be actual actual preview stretching. marked several touch using a on help will icon wheel. can the the point. will stitch the and in 100% activated, time, the will the for at the you lines having Screen is ools in focus stitch shows shows of it zoom T line This Creator™ same grid lines touch the pinching (Y) (X) point, when that you lines the the all, by arrows If grid Edit at center Stitch like previous appear. stitch wheel wheel Slider, the edge in the Multi-Touch means the or the look fabric. it in/out the the will the deselect points between the stitch Zoom from the will To on from a stitch point. eator™ only touching zoom between stitch above above green, on the deactivated. stitch is is Cr by icon. out, distance your stitch all also it stitch length All or position 1mm directly using making All point. icon the the created can number number distance move select eview visible. white the feeding needle stitch The points fingers The Move To equals When Stitch Zoom The marked field, zooming You your what repeats. be When Pr To Select If Select is Stitch Creator™ Feature Note: and/or want where Touch stitch Touch stitch If Delete The Mirr Note: Touch T be If point If Duplicate selection You Add points Touch touching stitch will 104 riple you several you duplicated selected be can Only Only to oring and points point point a want want you in & the the & tripled. vertically. insert. Stitch Stitch also hold hold shortcut Selected the the stitch use icon Triple enabled enabled can and is to to will stitch stitch delete add Selected selected, and Duplicate on on delete duplicate enter to points touch Stitch or create the the an insert in if if inserted point(s) field. icon. more more the existing Stitch the Duplicate Delete a Stitch the are single they icon a one menu to a exact than than new Stitch Delete selected, stitch create will after will icon and single stitch Point stitch one one stitch. number Point bar icon be point, the all the to icon. a stitch stitch or mirrored Point stitch from copy. all point, delete be marked to selected the stitch deleted If select get of point point the more point. Selection duplicates select all a pop-up horizontally stitch points stitch is is the stitch(es) stitch than when selected. selected. The the stitch Menu. point. will one two you 1. 2. Mirror Mirror Triple New Duplicate Delete Side End Stitch Stitch to to End Side Stitch Creator™ Feature re- 105 in will Sewing return then right to will created stitch and lower you loaded have the Mode be created in you will OK your Sewing , Creator™ stitch in stitch Stitch touch the sewn. a feature, Stitch be stitch Your Creator™. in to stitch without Sew Stitch screen. ready Cancel another Creator™ in created is mode the and the of . Creator™ touch select and Stitch remain sew sewing you you not open Load To Mode If to Stitch If corner in too that 9mm work stitch used it. folder stitch Save so or Stitch be Edit the than maximum the save The in information. sequence. stitch on Stitch cloud can open to the a sequence stitch in appear Stitch Select the Sequence wider touch hold stitch. more in the edit in that opened will in feature where open to for Creator, and exceeds be approximately edit Stitch appear. Stitch saved make stitches to to will mySewnet™ know Creator, want position in pop-up decide Stitch in up will touch will the your cannot an you A e Creator™ be stitch to Stitch Sequence sequence and let Save add Stitches cursor in In available the can the to mode locate See Toolbox will made screen. stitches If Stitch Buttonholes, saved the stitch Range not eatur and , Creator™ Stitch in and at made be F the of the are Stitch trying confirm. eated long. Smart sewing Messages device. sequence. sequence can a pop-up to Out feature. feature. Stitch are in a stitch Cr stitch Menu direction the name created a (20″) in Editable of inserted outside a this USB OK Creator™ are stitches you stitch stitch a and an be can four eator™ eator™ eator save to part stitch you length long. Sequence Your as Selection Cr Creator™ and Creator™ 500mm point Not Some Pop-up Stitch will A Using Cr . Creator™ To you Saving Edit If area button Your Cr created or Touch Help Center 5. 4. 3. 2. 1. Help In Help 8 its 106 the features. Sewing Techniques Getting User’s Help Help Help Center Center Center Guide Instructions Started Center and Center Window Tutorials you – – Overview Intr will oduction find information on how to use your 9. 8. 7. 6. 10. Quick WiFi mySewnet™ Stabilizer Return performance Settings Help to Guide Previous icon™ Window machine and learn more about Help Center 107 Previous to Help Settings Return Window WiFi Quick 7. 5. 6. Arrows Navigation Index Category mySewnet™ 1. 2. 3. 4. in topics the an Guide. of operate help in looking the to by the User’s what or topics how structure and shows the are. Index built-in shows about by the option machine option machine following open Guide to the information icon™ index category of User’s find The The Guide categories order. the Guide will features see into User’s Guide. you performance can Category. the divided User’s alphabetical User’s Touch You Here your different Help Center • and Project Select Some • • how basics In Getting • • • 108 this Threading Engage/Disengage Automatic Bobbin Bobbin Inserting animations. to of which of section Viewer engage the the Winding Winding Started guides the machine topic the Needle you will and Bobbin Upper you will will disengage open Through Threader such the are find show Thread with IDT™ interested as help Needle threading animations. the Step-by-Step that System IDT™ in has by the and to touching instructions machine, do more. with it. the A 5. 4. 3. 2. 1. Return Quick WiFi mySewnet™ Quick Settings Help Start to Previous Guides Window Help Center 109 Window Previous to Help Settings Return Tutorials mySewnet™ WiFi Quick 5. 1. 2. 3. 4. to for see sew to collars, it. your woven to need are are as etc) in for needed open and how Garment-, may instructions such There to as width using technique you you sewing stitches a about sub-category are for such for project The a (length, garments set out you Tutorials. Select from on Step–by–Step for However, tutorials utorials and type technique T a always find stitches tab. filtered find choose Touch is animations. are the fabric to will will and select of techniques etc. content you Techniques what you echniques then Quilt-techniques. and/or T stitches the available. on technique setting in open sewing categories and fabric. and pockets The project section to the images chosen projects this each echniques medium the available adjust depending project. In Garment different zippers, In with category the Touch Sewing- T different Help Center • in viewer, • • in for you the with set your technique and/or to Touch group width In binding different etc) need In exclusive different Touch Stabilizer In Quilting In Sewing 110 the a use each each this this for Specialty: backing Batting: stabilizers. Tear-a-away: for your chosen depending viewer. may images project. to group. special it. etc) to you. a to section section project project animations. adjust all etc. stabilizer project. The view kinds kinds need open sewing is T depending settings technique to T Use echniques Close filtered echniques and/or When information In uses. add They you you the different to the you you of of on Guide batting this Tear-a-way adjust techniques quilt sewing body to setting the what Stabilizer will will needed will will are selecting The category out animations. see is viewer on techniques find find easy between filtered stabilizers to find find the for fabric stitches more what techniques of about your for setting you. tutorials tutorials the to stabilizers Guide. Step-by-Step an etc. a to you information type the stitch fabric remove out instruction project. stitches select the your needed However, The will specific such within of for you stabilizer Select from about about such type stitches the top another find you. after are as (length, are for stitches the fabric instructions you as the a technique piecing, about temporary stabilizers with how how you using the However, stabilizer sewing. the needed group. is project stabilizer are chosen may shown and width to to images when (length, for using sew sew is for 5. 4. 3. 2. 1. Return Quick WiFi mySewnet™ Stabilizer Settings Help to Guides Previous Window Help Center 111 Size Text Step Window Increase Expand Play Content Close Current Panel 7. 8. 9. 10. 11. 12. Menu the in Icon Size The Text Steps Viewer Viewer Step Between Minimize Step Project Decrease Project Instruction Active Project 4. 5. 6. 1. 2. 3. 1. all to for step. be by will step. by to touch This will able the be will that need part. next materials. be it need you accessible closed contains for of Viewer also Viewer you them. the player or minimized, will you tab step. to list on the is can when between, Center following always It go in particular you that the needed Project video is stitches and to a active a is at Help text that that expand. icon. toggle Viewer when the the touching minimized to so that icon, Instruction the the icon, which is can be by find make project, looking icon The animations a vertically Project to hidden Play from stitch can you Stitch project. screen will icons. frame Minimize be Viewer the and increase the the A when the or how that you swipe enlarged you or Viewer on project do selected may the Content. green Viewer or on be load you a contains tabs tab When a to of Project Close images helpful project. that and The can touch have will Viewer two Project the one the able with decrease arrows around in very screen. you you loading content are you be the projects icons showing can the step be specific to images ojects the oject opened. the them, When open Some The All can There Instruction instructions, touching see In the Use be touching moved reach instructions. You Pr When shown When on touch Pr Help Center touch Close seeing Touch beginning. Touch move Screen Forward, player Touch Video 112 the forwards outside the & the the that View Player hold animation set Chapter Play entire opens On/Off. the the on icon or animation video Rewind video you backwards /Section to by You can view or touching player current to Play/Pause, can on the start icon in also Repeat window animation. the the to the chapter. drag toggle animation. X. animation and Rewind, You to the close. between turn In Slider can the Full from also Fast video to the 1. 4. 3. 2. Chapter/Section Play/Pause Rewind Slider Icon 7. 6. 5. Full Repeat Fast Screen Forward View File Manager 113 a to or folder cloud ™ mySewnet the in files saved Manager. your File the Store machine. open files. to icon™ tab stitch and files Manager performance File font oduction your open Intr select to to – and used is Menu Manager connected Main Manager device File Manager USB File Touch 9 File File Manager 1. File 114 Return Manager To Previous – Window Overview File Manager 115 folder View Folder Folder or Folder cloud One File New Up Device mySewnet™ Rename Create Delete List/Thumbnail Multi-Select Move USB 17. 10. 11. 12. 13. 14. 15. 16. folder cloud Strength Area Help Signal Information WiFi Selection File Quick Cut Copy Paste mySewnet™ 3. 5. 6. 2. 7. 8. 9. 4. File Manager be possible Note: Manager. Paste area • • following to connected The USB account Save mySewnet™ activated, touch If Multi-Select folder Store Br machine, Note: Your File display cloud. will on 116 you shown. explore .JOS .SPX the owse as USB be stitches If If performance your the the F want or Read an machine. synchronized trying the to (project Device all ormats (stitch and or Device to selected unrecognized Multi-Select load file touch it. to file of fonts the a to File about connected and the USB the to formats: type to file select file) files) load If the and the icon machine. connected fonts is files device you or mySewnet™ Manager icon™ Cloud damaged, same files a several stitches file is automatically combination file. icon. e.g. are to to only version you destination connected the machine mySewnet™ Touch signed to While devices. stitches active in it F want another mySewnet™ older is cloud. the is shown the not in of Multi-Select to can when mySewnet™ with a files/folders to to or Touch USB supported pop-up use. folder your the a load fonts in mySewnet™ the a cloud Copy the Device USB USB a saved the in message mySewnet™ at USB selection File by that is one ports. cloud device folder and icon your device files is time, will not to is device The and To selected. depending are folder open folder Touch Open Touch Sequence If information you display displayed USB downwards folder load or will a & is file hold Device connected USB a Creator. be the on a File is to area. stitch shown as Device. written on if read content, you icon thumbnail to a Touch or font folder scroll information to have in is Swipe in F your touch only the file, older the & and to List hold selection images machine. it open current available with the view will View the about mySewnet™ it. your be the or file folder The or area. loaded with when the Thumbnail content. finger to content The load file area. an a into cloud upwards USB in icon path it. Font the of View the of file files an File Manager 117 Level View Folder Folder Cut New Paste One Rename up Create List/Thumbnail Move a it in and more for icon. see list type. Touch where makes the folder files pop-up In new another cut between select different file move will name removed all up. A up selection. name with to to This the is new the your opens up and file and a you icons. the in step step many toggle icon. new touch to step to Other. with touch area select you the name folder(s) place create have folder(s) to stored categories as can folder message icon organize to to icon or and file then or time. folder, or to you enter thumbnail folder. able shown into now You if the level or icon level be as and is selection Level want file View same file(s) it. Stitch can file(s) how to pop-up file. or your file and older file file the the each with F A a you sorted on you the folder for list The folder View folder. In open folders. older move of for a older or F of are rename Folder, each folder(s) to of F to folder older in one specific new location shown icon. where F or same or name level. the where a files name File is up a position. Multi-Select view files folders image paste levels One folder the a all and/or first find the a paste create List/Thumbnail file instructions File file(s) folder in New touch the opens headings; the enter and original to file move and a up on the the the the are folder. the current view the Activate each its to one can then cut the Manager. or types files change eate thumbnail list the hold easier thumbnail file and message Move Use in location. Select Open Touch folder. Note: then Rename To through File Cr Touch you from Below Organize Use way the Move Touch & List/Thumbnail view In a In file showing separate it File Manager different another Folder mistake. screen. deletion up touch To within confirm icon. Note: (s) stored Touch You the When Delete Pop-up To Delete more Open Select location. Use Copy 118 still delete delete message deletion copy cannot then A Activate the & the deleting in the the Already exists File This pop-up a folder the hold of level a the one all a and folder file(s) File Paste folder all file File or create deletion. will will Messages in files new file in the Multi—Select paste content. Folder or on the or a or message the Exists or where icon. and/or appear prevent file or enter delete are and folder, folder the a pop-up folder(s), F previous to new older or F deleted If same The folders older copy a you folder folder, a icon so and different will folder select you folder file(s) message that to level. want file(s) then in for the at folder. as appear shown from be you it the you with well. is able a or File original and to Create touch name few deleted, or same deleting will folder(s) that place can to so in the folder(s) touch seconds. select Manager the need that time. the for confirm appears your same file(s) the all active the copy the anything you is and to selection. files folder to name now folder. or A confirm delete move can the another on icon. folder, pop- folder on as by a Delete Paste Copy File Manager 119 Loaded be space, by same machine the the is space. your Cannot to fill device up to left, space USB is free Types a loaded the to to be File continue space until not files of you can If functions Memory again, your Selected amount of you time. Multi-Select. paste Move one and small Available using full. a remind cut combinations you only not the file Combination Enough alert will completely The it using will Some destination When Not Maintenance bobbin microfiber Wipe part Remove of several cloth Wipe Clean Cleaning Cleaning Removing often. To Cleaning 10 lint Note: place. that off plate cover. pushing Remove area. Note: Put 120 lint keep the will the is of Check to Do Regularly as the the No the in Place included needle Maintenance the case thread Use Turn projects bobbin be remove shown your the the the not the screen exterior lubrication area blown the bobbin cloth. caution (B) blow the bobbin presser release bobbin off sewing cutter plate. area Under the the under clean case and by the or with supplied any with into the air surface case when any lifting when machine. gently knife button case and foot. case Clean into the dust Bobbin Machine your the (oiling) the machine a Needle time by clean, lint changing the cleaning the holder (C). accessories. area. bobbin the Open it or screwdriver machine. of lifting the turn (A) up. and bobbin you bobbin lint your is soft feed operating to Bobbin Clean the needed. threads the (A) built notice case Ar around it the the machine and Plate case Exterior up. bobbin teeth screwdriver case covering ea needle right. up. after with under slightly Remove from area. an the holder with well, accumulation sewing plate. with cover the and automatic Remove Ar the The the the the clean damp brush. ea bobbin the back dust a to needle front by soft brush pop the it and in A B C Maintenance be 121 foot foot the ON can sewing. area. and/or the the The pulsating not the authorized menu. model. piercing in original then in presser you. Selecting 32. authorized presser the D into the heavy does this the motion bobbin local and machine See to Changing help the performance safety page down needle your for settings authorized to the free only see to OFF your from when screen your the lifting. on fabric. malfunction. for inserted related set use width your lint penetrate in of Increase for the contact happy be set to not If from pulsating and contact caused to especially be machine a stitch not clean buttons described, is are selected cutter Combination, securely contact is foot or area the needle. as will socket. needle seem for and persists, recommendations. with please designed are service. indication the teeth the sound turn the thread not who designed electricity. an wall for function needle feature, plate bobbin D machine feed plugs The with 29. correctly the not suitable does problem and helps static prevent touch, all equipped on-screen is twin the the lift from retailer accessories to to retailer bobbins retailer. and is to needle the information page menu. menu. Thread/Needle that the automatic piercing machine. that If fabrics. lint needle sure sure needle sound fabric only a sockets sound the further PFAFF® Clean PFAFF® PFAFF® Enable Make pressure If needle Remove machine Make Needle, Correct Check Use icon™ Follow The again. PFAFF® The feature dense and Use sensitive respond machine settings Deactivate settings Insert do to at sound clicks For the it notch the buttons solutions the from until machine. fabrics find into function down stitch fits Plate will your different dense it thread cover. plate you and/or with the that sewing. narrow sound so or and/or cut work guide have bobbin needle sew screen Needle when not not plate the the not may heavy distinct feed the touch a blems in does irregular does will result to you Press machine not breaks needle Pro Replace generated emits (D). cutter alarm the stitch, al does sewing troubleshooting sewing machine sewing needle respond place. problems back oubleshooting this r Bobbin Fabric Thread The The When machine normally not Poor Wrong The Gener T In Position the Replacing the into Maintenance The The prevent return local Pop-up service to the damage its Pop-up position. OK in Is Pop-up 122 Did Is position Touch Did Did to threader or Are The Pop-up center. correctly, automatic Pop-up its or Pop-up the the try the be other heavy home home automatic to you you you you needle Machine Automatic authorized blocked threading correct needle automatic return to OK center. message: message: message: message: message: message: damage stretchy to for using thread insert insert has position. position. weight its please needle to the eye manual home failed. bent the presser move and needle machine. a a the is the again specialty wrong contact service needle thread? to Skips automatic thread, The The Gently The The The too threader or cannot Further Touch position. needle the Needle the machine Touch cleaning. blunt? foot threader small automatic automatic automatic calibration automatic or machine. automatic needle? threader center. After your metallic remove contact Stitches OK return used? properly? thread sewing OK still for needle Further properly? to Thr local closing button to the does calibrate. to needle needle needle needle Please your or such any of calibrate or needle is eader thread threader its authorized the needle sewing flat not disabled thread on this home local as automatic contact threader threader threader threader metallic calibrate your an threader pop-up, again. Does eye. authorized is to “invisible” position. that to disabled machine its service your Touch prevent thread cannot is seems is is If home needle to Not touch not not the stuck in in to W ork Contact Contact touch through carefully thread automatic If Attach see Remove remove If instructions Insert manual thread automatic Selecting If Use Use Needle, Insert Selecting Use touch anything threader Shown The sewing. possibly needle the hook Specialty Touch using you using Threading needle needle a needle a Pr on needle larger OK. OK. a needle cannot OK through through threader correct if operly new the cleaning. thread thread page your your the the the due when so the Correct Correct that threads needle needle to will threader system thread, as needle will automatic thread needle needle. machine suitable to calibrate correctly authorized authorized 29. identify may presser the not turning that that not the the something again appear. Thread/Needle Thread/Needle may A threader threader Upper to be 130/705 be needle needle touch eye. completely size is is new has damage for blocking too too threaded. the fails or foot. the not as needle on or Once shifted pop-up thread selected PFAFF® PFAFF® Thread, described, cancel. thick thick problem needle the be eye. eye. may may lighter snagging to H. caught calibrate the the threader. machine. the and Remove Touch for for not not from the Try message threader small thread fabric page Combination, Combination, weight retailer retailer the the needle or rethread be be needle see using on correctly its are OK needle, needle, able able the 30. hook it If Remove and the Changing home is unable thread. during this with threader for for to needle the and removed, manually. to to thread thread. go the that service. service. pull pull automatic by happens, the the position, continue further to page page machine, to See the sewing. runs the the the and See 32. 32 Maintenance an 123 32. See small a Hints, page thread under in machine, machine, from page use Motion and until up original horizontal). the the thread. thread. or actual menu Free the the Needle, Tips side the and spools 30. 30. the for the purchased for flat only rethread rethread increments Combination, settings page page (vertical fabric than the larger size use solved. in and and thread Threading for is designed small with and H. Changing larger or model. See in Thread, Thread, proper selected position height see area pin, quality this the for tension. holder pin retailer. problem machine. spool. completely completely to plate. plate. 130/705 slightly for pivot Upper Upper thread. especially tension Thread/Needle high the spool the bobbin Embroidery/Sensormatic spool spool cap the the the thread correctly, icon™ suitable needle. the bobbin. new thread thread needle thread. needle needle. needle 6A until system PFAFF® solved. over a thread bobbin from on Correct large bobbins is spool the the approved the to the the the the the new new a net the the needle lint a needle a needle the different decrease 34. needle a only a spool Threading Threading using see thread page Change Change Clean see Change 29. Use Use Selecting Insert Remove Place the authorized Attach Use performance Check Change bobbins Wind Check Remove If Insert spool. Change Foot, increments Try Change Lower problem so when the which small too under needle it thread? thread is the or caught slubbed? with selected spool? spool, or get slubs thread? thread? for Stitches the the used? properly? down and thick with of of the the properly? properly? lint? high and needle? damaged? damaged? top top eaks for for eaks of down correctly? using correct? too used? blunt? up position thread on Br machine Br the Uneven bobbin hole needle hole full or are at small small wrong pin slide cap the the a the poor ead ead area wound bobbin has too bent plate too plate you tension tension moving dry? sewing? snags spool spool Thr thread Thr thread insert insert insert using a spool? needle bobbin thread needle needle bobbin thread correct fabric thread needle best needle the Seam motion you you you you you become thread the the the the the the the the the the the the the using Is Are has Does Is Is Is Did thread If the Did Is Is Is Is Is Did Is free Did Is Is Is The Bobbin Needle Maintenance caused often problem, using performance T The Non-Original technician helpful and If Have Service The 124 Receiver Transmitting Frequency WiFi Safety Foot Sewing Light Nominal Are Is Has Rated Is Did Is Is echnical you the the a the warranty still correct the you sewing give Machine your with control have module: free correct bobbin by voltage to class have speed feed please thread sensitivity bring better consumption use diagnose you. sewing motion followed needle lint model teeth problems, does presser of thread power specification the If bring information the non-original collected P Does icon™ you setting machine not set used? fabric, arts the machine this evenly foot that have to cover problem. contact down? troubleshooting Not and on? between thread used? as machine a serviced wound? any than well. properly? stitch accessories F Accessories your eed defect and words A the out sewing retailer. regularly stabilizer or feed that or and or information F damage eeds shows teeth? parts. sample help It by may you Irr your your the are will be egularly local -97dBm +17dBm 2.4GHz II 1050 Turn the Remove FR5 LED <100W see Remove 100–120V/200–240V, Attach settings Make Correct Use Changing Insert Check authorized Threading brush. a lamps stitches/minute off needle sure a bobbin correct proper Thread/Needle band menu. the the free the the needle thread retailer! motion suitable 802.11 Needle, winding. presser the feed needle Upper completely teeth plate b/g/n setting 50–60Hz maximum for page foot. correctly Combination, selected are and Thread, 29. in not clean sewing and as set fabric. page described, the rethread to mode. down page feed 30. See teeth 32. Selecting the in see the machine, with Maintenance 125 14.5 590 220 400 can guide user’s this and notice. only prior machine specifications without (kg), dimensions: (mm) (mm) (mm) technical changed weight be The Net Machine Width Height Length • IMPORTANT • • • • • • • • INJURY Read following: • BURNS, W • ELE DANGER machine to machine. precautions When with This INS IMPORT 11 126 the ARNING deflect is repair, authorized water. Never this recommended described Use near Wear Do Do can Always Keep accumulation sewing openings Never it damaged necessary Do A lubricating using machine when adjustments has household required C sewing IEC/EN TRUC all machine. not not not using cause TRIC manual. IMPORT this children. fingers instructions been safety and plugged is operate operate Keep Return electrical the pull use allow machine T use given sewing FIRE, from should O blocked. ANT an cord –T machine the when in before needle dropped 60335-2-28 SHOCK: around bent dealer or TIONS –T or the glasses. the PERSON: mentioned this electrical O Make sewing away to needle of when the the to push O this the or by in. REDUCE proper be instructions ELE needles. machine this or lint, and always manual. a SAFE cleaning, REDUCE plug, sewing the causing Always electric before or sewing Keep third used sewing should from sure the mechanical ANT fabric making or sewing machine service to foot dust, C manufacturer appliance, and sewing damaged, TRIC needle if break. to in as party. ventilation be all using only TY it control machine Use outlet machine it unplug while never hand the and UL1594. machine removing a is followed, moving THE to machine center any at toy. not is THE only instruction for SHOCK, plate. machine break. a adjustment. loose this designed immediately them stitching. suitable other be Close basic free working or its this RISK to attachments for with household left openings if parts. as RISK dropped The intended cloth. covers, the is including from it over sewing examination, user contained safety attention unattended used needle. has any wrong nearest place OF manual. to OR Special It properly, if the servicing OF a comply may air by the after of into use sewing close the or plate the is in care as if • • • • • • • • • • • supervised responsible concerning unless mental (including This FO sensory years This FO SA sewing knowledge Co., FR5 The than The shall and instruction play Switch Never changing needle, any If Do placing The the Do being Do Do replaced position, To its damaged, If similarly Appliances. instructions insulation. This order R R VE machine noise understand manufactured Ltd. sewing appliance the the with 80dB(A). not OUT EUROPE service and disconnect, not not not not plug, they adjustment foot capabilities, sewing machine. THE or LED supply to used be drop the level the use unplug operate use above SIDE changing other children) mental avoid concerning to use control if have by for made then qualified not machine presser agent it must SE lamp they appliance. sewing Use ensure the outdoors. or or the can for must machine their under of ONL cord the the objects EUROPE: and where remove been a insert INS turn machine by the by where only capabilities have Servicing manufacturer in only be by is hazard. or is cord. or hazards needle, foot, with Y safety. be pulling connected persons children that the used damaged machine is person, sewing : a used normal Shanghai given TRUC lack all use identical similarly replaced oxygen not any on been be is Cleaning aerosol needle plug etc. controls reduced they provided to if used of the of by intended Children threading object of supervision involved. it on given operate with machine the in experience operating without TIONS or from children off foot do is Double-Insulated or is with Binao cord. order area, with replacement (spray) by or lack wet. qualified appliance being (“0”) not broken, and to physical, into reduced control. supervision its outlet. the with the the should for foot the of such To play to Precision bobbin, service supervision. user by Children any aged when manufacturer administrated. conditions experience off products use foot avoid unplug, or and machine. double a control it person, with as opening. person physical, maintenance in instruction (“0”) sensory must by be from control knowledge, parts. threading making a agent or a persons or safe the Mould shall hazard. grasp of be are 8 in Avoid is and See type or or way is less not or a IMPORTANT 127 and by a or is care for Servicing those only to parts product done extreme product. be INSULATION’ identical the be to documents. requires should Replacement must and added ‘DOUBLE licence double-insulated product be to A system product words personnel. links the the for product. of INSULATED’. grounding service with the for in double-insulated a Licenses Placeholder marked ‘DOUBLE means of qualified double-insulated parts knowledge is less a type is of Mould means insulation should of TED control nor conditions ground Precision foot No systems INSULA with product, Binao two operating used be grounding. Shanghai normal product, of DOUBLE by only OF under double-insulated S instead must a T level on 80dB(A). Ltd. manufactured machine noise double-insulated provided a FR5 Co., than The PRODUC provided SERVICING In are The

You have purchased a modern, updatable sewing machine. As we regularly release firmware updates, it is possible that there may be some differences between the machine firmware and the firmware described in the user’s guide. Consult your local authorized PFAFF® retailer, and be sure to visit our website at www.pfaff.com for the latest updates of the firmware and the user’s guide. We reserve the right to change the machine equipment and the assortment of accessories without prior notice, or make modifications to the performance or design. Such modifications, however, will always be to the benefit of the user and the product.

INTELLECTUAL PROPERTY Patents protecting this product are listed on a label positioned underneath the Sewing Machine. ICON, IDT, IDT™, MYSEWNET, PERFORMANCE, PFAFF, and PERFECTION STARTS HERE are trademarks of Singer Sourcing Limited LLC.

Please note that on disposal, this product must be safely recycled in accordance with relevant National legislation relating to electrical/ electronic products. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. When replacing old appliances with new ones, the retailer may be legally obligated to take back your old appliance for disposal free of charge. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Manufacturer VSM GROUP AB, SVP Worldwide Drottninggatan 2, SE-56184, Huskvarna, SWEDEN www .pf aff.com

4710467-26C · © 2018 Singer Sourcing Limited LLC · All rights reserved