<<

1 GT-R 2 BRZ/GT-86/FR-S 3 MX-5 Miata pre new 2015 model

4 Nissan 370Z 5 Juke 6 Up to 2015 STi Subaru STI/WRX/Forester – fact sheet ProECU is a powerful all-in-one tuning solution that reprograms the car’s original ECU via the OBD-II port

Main Features n Ignition control, correction maps, by gear n and per cylinder, knock retard and learning n Fuelling includes injector firing angle 7and - WRX STi 2015 WRX DIT 8 - Mazda MX-5 Miata New 2015 model 9 n fuel consumption meter calibration n Boost control with target pressures, n compensations and valve frequency control n Inlet and exhaust VVT control fully defined n Torque and throttle maps n Limiters and sensor scaling n Secondary air pump control, tumble valve n delete and gear thresholds n Enable/Disable DTCs & DTC Limits ACHIEVEMENTS Supported Models Endorsements Isle Of Man TT Record

Supports all electronic-throttle models worldwide The Performance Pack from 2004-2015* including STI, WRX, Forester, was sold through Subaru UK with a Legacy, more than 400 different ROMs supported, 3yr warranty; also, Subaru created including for naturally aspirated versions the EcuTek-powered, limited-edition *Go to www.ecutek.com for a full list of Subaru UK300, WR1, GB270, RB320, 330S models supported by ProECU and 320R/340R models

ECU Connect – Coming Soon In a RaceROM-powered 2015 Subaru STI, Mark Higgins smashed the TT Bluetooth Connectivity For Your Mobile Device record with 19min 11sec ECU Connect is a free iPhone/iPad app that works with EcuTek’s and an average 117.5mph new Bluetooth Vehicle Interface to offer you advanced features Gymkhana: Ken Block STI and functionality, and it will soon be available for Subaru’s STi and WRX cars. Features typically include... n Datalogging Record and display literally scores of engine- running parameters n DTCs Read and clear diagnostic The plug-in Bluetooth trouble codes Vehicle Interface module n ECU Reset Clear all learned values n Performance Analyser Share your This was the first performance test results with friends RaceROM-powered Ken Block STI to produce in n Map Switching Switch between excess of 650bhp different modes using your device* n Dealer Locator Find your nearest Cosworth CS400 tuner, wherever you are in the world The limited-edition 400bhp CS400 was sold with a 3yr Subaru UK warranty *Function not available on all models www.ecutek.com T +44 (0)1895 811200 Skype: skype.ecutek [email protected] 1 GT-R 2 BRZ/GT-86/FR-S 3 Mazda MX-5 Miata pre new 2015 model

Subaru STI/WRX/Forester – fact sheet

4 Nissan 370Z 5 Juke 6 Up to 2015 STi

RaceROM Special Features

Map Switching Swap effortlessly between ROAD and RACE maps using SI 7 - Subaru Impreza WRX STi 2015 WRX DIT 8 - Mazda MX-5 Miata New 2015 model 9 Drive, ECO switch or full throttle and the defog switch, a flashing check engine light (CEL) indicates the current map switch mode that’s selected. RaceROM features can be enabled in any of the Map Switch modes The following maps are available for RACE mode Map Switching: • Ignition Base and advance maps • Fuel Base maps, injector size, closed-loop lambda target, per-gear enrichment • Per-gear boost targets and per-gear wastegate control (initial and max duty cycle) • VVT Intake and exhaust maps • Vehicle Speed Limiter Throttle-based for Valet mode or as a pit-lane limiter Launch Control (Includes Boost Off The Line special feature) Live-adjust the launch RPM using the cruise control or the accelerator pedal and defog switch (where cruise control is not fitted). BOTL is a clever and dynamic pre-launch manifold pressure target. Set any boost pressure you want on launch! It can be enabled in ROAD or RACE mode

Flat-Foot Shift Full-throttle gearshifts by reducing the engine torque and controlling the air/fuel ratio during the shift Auto Blip Applies a short burst of throttle when down-shifting under braking to provide a smooth entry into the next gear Speed Density MAP sensor-based tuning with a hybrid SD option offering a transition from MAF to SD (or vice versa) so you can have the best of both worlds, a must for high-power forced-induction models E85 and Flex-Fuel Create an accurate ethanol calibration by importing a Flex-Fuel sensor signal into the ECU

Additional Features

Up to 20 custom logging parameters critical to accurate calibration Combined Ignition View lets you see the total ignition timing relative to the advance multiplier Coloured Map Tracing showing AFR or knock events on the map ROM Compare see the differences between two ROM files High-Speed ECU Programming in less than a minute ECU Recovery & ECU Data Protection stops others copying your work Read & Clear DTCs plus ECU Reset function FREE Downloads of the latest updates and features with EcuTek Update ProECU Programming Kit Support for worldwide E-Tuning

For a full list of products and features, pricing details and video demonstrations visit www.ecutek.com