WHICH ANTI-SLIP PRODUCT IS RIGHT FOR YOU? TOUGH ENOUGH FOR EVERYTHING FROM FLIGHT DECKS TO FACTORY FLOORS
ANTI-SLIP COATINGS American Safety Technologies (AST) Anti-Slip Coatings for Pedestrian and light Traffic are known for incredible 5X MORE DURABILITY. 5X FEWER toughness and durability. HEADACHES Originally engineered for Constantly replacing conventional anti-slip the flight deck of U.S. coatings can be a real headache. That’s why Anti-Slip Coatings Navy aircraft carriers, AST Anti-Slip Coatings are engineered to last AST coatings withstand up to five times longer than sand-in-paint and other over 15,000 high-impact anti-slip treatments. Five times more durability means five jet landings per year. In what the Navy calls a “controlled times fewer applications; five times less downtime; five times crash”, each 30-ton fighter jet smashes onto the deck, fewer budget problems; and five times fewer scheduling dragging a steel tailhook across the surface at over 170 headaches. With AST, you may even spend five times fewer m.p.h. In addition to this relentless beating, AST Coatings late nights, weekends, and holidays at work applying anti- also withstand some of the most caustic substances in the slip coatings. HEAVY-DUTY ANTI-SLIP COATINGS world including jet fuel, Skydrol hydraulic fluid, grease, oil for Heavy Vehicular or Pedestrian Traffic with and salt spray. If AST Coatings can stand up to the relentless EASY TO APPLY. EASY TO CLEAN Maximum Resistance to Chemicals punishment of fighter jet traffic, they can surely handle your AST Coatings are just as toughest forklift, steel-wheeled, and pedestrian traffic. easy to apply as paint. Simply roll onto a clean, dry, PUT BATTLE-TESTED TOUGHNESS TO WORK FOR YOU uncontaminated floor. Most of Today, companies around the globe are putting AST to the our coatings are ready for light test in a variety of industrial traffic in 12-24 hours, heavy applications. AST Anti-Slip traffic in just 48 hours. AST Coatings have proven Anti-Slip Coatings are easy to exceptionally durable clean, too. They meet the ASTM D-3450 test for washability in the most demanding and easy clean-up. Just sweep, hose off, or run a scrubbing PROVE IT WITH A TEST PATCH environments imaginable machine over the surface with the cleaning solution of your Call today and we will put you in touch with your local AST distributor. They — from blast-furnace hot choice. can apply a test patch in your facility steel mills to Antarctic- that will prove beyond a doubt that cold storage lockers; from EXTRAORDINARY PERFORMANCE FOR THE AST Anti-Slip Coatings will stand up to caustic chemical plants to PRICE OF ORDINARY PAINT anything your plant can dish out. Your waterlogged pulp mills; from the dark, dank holds of ocean AST’s proprietary formulas incorporate coatings professional can also provide going tankers to the sun and weather ravaged surfaces of high tech materials second only an expert floor or concrete analysis, help you place an order, or answer any offshore oil rigs. When we say AST is battletested tough, we to diamonds in hardness and are questions you may have. mean the kind of proven toughness engineered to provide a unique profile that can handle the most punishing of peaks and valleys when rolled
*Prices and specifications subject to change. Kevlar is a registered trademark of DowDuPont. traffic and the harshest chemicals onto a surface. Liquids and other that industry can dish out. AST Anti- contaminants flow into the valleys DISCOVER THE Slip Coatings also exceed strict leaving the high-traction peaks OSHA, ADA, USDA, ASTM and U.S. exposed. If the peaks ever begin to wear away, they expose U.S. NAVY’S Military specifications. fresh grit, providing excellent slip-resistance for years. How much does all of this extraordinary performance and durability cost? Probably not a penny more than what you’re SECRETE WEAPON currently paying. At only $1 to $3/sq. ft., AST Anti-Slip WWW.ASTANTISLIP.COM Coatings cost the same as ordinary industrial floor paints. AGAINST SLIPS
ITW POLYMERS SEALANTS NORTH AMERICA, INC. AND FIGHT AMERICA’S 111 S. Nursery Road, Irving, TX 75060 | Tel: +1 972-438-9111 #1 WORKPLACE KILLER! Fax +1 972-554-3939 | [email protected] | www.itwast.com WHICH ANTI-SLIP PRODUCT IS TOUGH ENOUGH FOR EVERYTHING FROM RIGHT FOR YOU? FLIGHTTOUGH DECKS ENOUGH TO FACTORY FOR EVERYTHING FLOORS FROM FLIGHT DECKS TO FACTORY FLOORS
ANTI-SLIP COATINGS American Safety Technologies (AST) Anti-Slip Coatings for Pedestrian and light Traffic are known for incredible 5X MORE DURABILITY. 5X FEWER toughness and durability. HEADACHES Originally engineered for Constantly replacing conventional anti-slip the flight deck of U.S. coatings can be a real headache. That’s why Anti-Slip Coatings Navy aircraft carriers, AST Anti-Slip Coatings are engineered to last AST coatings withstand up to five times longer than sand-in-paint and other over 15,000 high-impact anti-slip treatments. Five times more durability means five jet landings per year. In what the Navy calls a “controlled times fewer applications; five times less downtime; five times crash”, each 30-ton fighter jet smashes onto the deck, fewer budget problems; and five times fewer scheduling dragging a steel tailhook across the surface at over 170 headaches. With AST, you may even spend five times fewer m.p.h. In addition to this relentless beating, AST Coatings late nights, weekends, and holidays at work applying anti- also withstand some of the most caustic substances in the slip coatings. HEAVY-DUTY ANTI-SLIP COATINGS world including jet fuel, Skydrol hydraulic fluid, grease, oil for Heavy Vehicular or Pedestrian Traffic with and salt spray. If AST Coatings can stand up to the relentless EASY TO APPLY. EASY TO CLEAN Maximum Resistance to Chemicals punishment of fighter jet traffic, they can surely handle your AST Coatings are just as toughest forklift, steel-wheeled, and pedestrian traffic. easy to apply as paint. Simply roll onto a clean, dry, PUT BATTLE-TESTED TOUGHNESS TO WORK FOR YOU uncontaminated floor. Most of Today, companies around the globe are putting AST to the our coatings are ready for light test in a variety of industrial traffic in 12-24 hours, heavy applications. AST Anti-Slip traffic in just 48 hours. AST Coatings have proven Anti-Slip Coatings are easy to exceptionally durable clean, too. They meet the ASTM D-3450 test for washability in the most demanding and easy clean-up. Just sweep, hose off, or run a scrubbing PROVE IT WITH A TEST PATCH environments imaginable machine over the surface with the cleaning solution of your Call today and we will put you in touch with your local AST distributor. They — from blast-furnace hot choice. can apply a test patch in your facility steel mills to Antarctic- that will prove beyond a doubt that cold storage lockers; from EXTRAORDINARY PERFORMANCE FOR THE AST Anti-Slip Coatings will stand up to caustic chemical plants to PRICE OF ORDINARY PAINT anything your plant can dish out. Your waterlogged pulp mills; from the dark, dank holds of ocean AST’s proprietary formulas incorporate coatings professional can also provide going tankers to the sun and weather ravaged surfaces of high tech materials second only an expert floor or concrete analysis, help you place an order, or answer any offshore oil rigs. When we say AST is battletested tough, we to diamonds in hardness and are questions you may have. mean the kind of proven toughness engineered to provide a unique profile that can handle the most punishing of peaks and valleys when rolled
*Prices and specifications subject to change. Kevlar is a registered trademark of DowDuPont. traffic and the harshest chemicals onto a surface. Liquids and other that industry can dish out. AST Anti- contaminants flow into the valleys DISCOVER THE Slip Coatings also exceed strict leaving the high-traction peaks OSHA, ADA, USDA, ASTM and U.S. exposed. If the peaks ever begin to wear away, they expose U.S. NAVY’S Military specifications. fresh grit, providing excellent slip-resistance for years. How much does all of this extraordinary performance and durability cost? Probably not a penny more than what you’re SECRETE WEAPON currently paying. At only $1 to $3/sq. ft., AST Anti-Slip WWW.ASTANTISLIP.COM Coatings cost the same as ordinary industrial floor paints. AGAINST SLIPS
ITW POLYMERS SEALANTS NORTH AMERICA, INC. AND FIGHT AMERICA’S 111 S. Nursery Road, Irving, TX 75060 | Tel: +1 972-438-9111 #1 WORKPLACE KILLER! Fax +1 972-554-3939 | [email protected] | www.itwast.com WHICH ANTI-SLIP PRODUCT IS RIGHT FOR YOU? TOUGH ENOUGH FOR EVERYTHING FROM FLIGHT DECKS TO FACTORY FLOORS
ANTI-SLIP COATINGS American Safety Technologies (AST) Anti-Slip Coatings for Pedestrian and light Traffic are known for incredible 5X MORE DURABILITY. 5X FEWER toughness and durability. HEADACHES Originally engineered for Constantly replacing conventional anti-slip the flight deck of U.S. coatings can be a real headache. That’s why Anti-Slip Coatings Navy aircraft carriers, AST Anti-Slip Coatings are engineered to last AST coatings withstand up to five times longer than sand-in-paint and other over 15,000 high-impact anti-slip treatments. Five times more durability means five jet landings per year. In what the Navy calls a “controlled times fewer applications; five times less downtime; five times crash”, each 30-ton fighter jet smashes onto the deck, fewer budget problems; and five times fewer scheduling dragging a steel tailhook across the surface at over 170 headaches. With AST, you may even spend five times fewer m.p.h. In addition to this relentless beating, AST Coatings late nights, weekends, and holidays at work applying anti- also withstand some of the most caustic substances in the slip coatings. HEAVY-DUTY ANTI-SLIP COATINGS world including jet fuel, Skydrol hydraulic fluid, grease, oil for Heavy Vehicular or Pedestrian Traffic with and salt spray. If AST Coatings can stand up to the relentless EASY TO APPLY. EASY TO CLEAN Maximum Resistance to Chemicals punishment of fighter jet traffic, they can surely handle your AST Coatings are just as toughest forklift, steel-wheeled, and pedestrian traffic. easy to apply as paint. Simply roll onto a clean, dry, PUT BATTLE-TESTED TOUGHNESS TO WORK FOR YOU uncontaminated floor. Most of Today, companies around the globe are putting AST to the our coatings are ready for light test in a variety of industrial traffic in 12-24 hours, heavy applications. AST Anti-Slip traffic in just 48 hours. AST Coatings have proven Anti-Slip Coatings are easy to exceptionally durable clean, too. They meet the ASTM D-3450 test for washability in the most demanding and easy clean-up. Just sweep, hose off, or run a scrubbing PROVE IT WITH A TEST PATCH environments imaginable machine over the surface with the cleaning solution of your Call today and we will put you in touch with your local AST distributor. They — from blast-furnace hot choice. can apply a test patch in your facility steel mills to Antarctic- that will prove beyond a doubt that cold storage lockers; from EXTRAORDINARY PERFORMANCE FOR THE AST Anti-Slip Coatings will stand up to caustic chemical plants to PRICE OF ORDINARY PAINT anything your plant can dish out. Your waterlogged pulp mills; from the dark, dank holds of ocean AST’s proprietary formulas incorporate coatings professional can also provide going tankers to the sun and weather ravaged surfaces of high tech materials second only an expert floor or concrete analysis, help you place an order, or answer any offshore oil rigs. When we say AST is battletested tough, we to diamonds in hardness and are questions you may have. mean the kind of proven toughness engineered to provide a unique profile that can handle the most punishing of peaks and valleys when rolled
*Prices and specifications subject to change. Kevlar is a registered trademark of DowDuPont. traffic and the harshest chemicals onto a surface. Liquids and other that industry can dish out. AST Anti- contaminants flow into the valleys DISCOVER THE Slip Coatings also exceed strict leaving the high-traction peaks OSHA, ADA, USDA, ASTM and U.S. exposed. If the peaks ever begin to wear away, they expose U.S. NAVY’S Military specifications. fresh grit, providing excellent slip-resistance for years. How much does all of this extraordinary performance and durability cost? Probably not a penny more than what you’re SECRETE WEAPON currently paying. At only $1 to $3/sq. ft., AST Anti-Slip WWW.ASTANTISLIP.COM Coatings cost the same as ordinary industrial floor paints. AGAINST SLIPS
ITW POLYMERS SEALANTS NORTH AMERICA, INC. AND FIGHT AMERICA’S 111 S. Nursery Road, Irving, TX 75060 | Tel: +1 972-438-9111 #1 WORKPLACE KILLER! Fax +1 972-554-3939 | [email protected] | www.itwast.com WHICH ANTI-SLIP PRODUCT ISWHICH RIGHT FORANTI-SLIP YOU? PRODUCT IS RIGHT FOR YOU? APPLICATION AS EASY AS 1, 2, 3. TECHNICAL INFORMATION
AS-2500 LTC AS-75 RezRok® 105 AS-150 HF
AS-175AS-250AS-500 This single-component, low-VOC, elastomeric acrylic RezRok 105 Epoxy Floor Patching Mortar can be used AS-75 polymer is specially formulated for pedestrian traffic and where a paste consistency is required. Excellent for a wide is uniquely compatible with asphalt. It yields a sealed and range of construction and structural repair applications weather-resistant anti-slip surface and can be applied over such as patching significant defects or holes/spalls on damp areas. Clean-up is fast and easy, since it’s water- concrete surfaces prior to applying AST Anti-Slip Coatings. based. Use it on asphalt, primed steel, concrete or wood–walkways, ramps, platforms– EST. COVERAGE IN SQ. FT./GAL anywhere you need a durable, anti-slip surface. Available in: gray, black, and safety yellow. Roller 70 50 90 40 25-35 25-35 OUR PRODUCTS ARE SO EASY TO APPLY YOU CAN Trowel 40 50 40 40 AS-150 HF DO IT YOURSELF. Spray 125 60 120 60 60 60 Because of its single-component formulation you can For all but the biggest jobs, you don’t need a contractor use this Kevlar®-fortified epoxy straight out of the can as EST. POT LIFE IN HOURS needed and then re-seal for future use. Withstands heavy so there is no wasted time and aggravation gathering bids. @70°F (21°C) NA NA 1 4 1 1 pedestrian and light rolling traffic, gasoline, fire, oil, salt You can apply it as needed, when it’s convenient for you water, acid, alkali and aliphatic solvents–and is great for MEETS OSHA, ADA, ASTM, & MILITARY SPECIFICATIONS floors, ramps, decks, entrances, treads, machine shops and manufacturing facilities. (minimizing down time) or on areas too small to interest a
Available in: gray, black, and safety yellow. Also available in a Low VOC Version. A Variety of Tint Bases are Available for AS-75, AS-150HF and AS-175. contractor. Y=Yes Y Y Y Y AS-250 is available in Haze Gray, 5 gal unit only. EST. DRY TIME IN HOURS@70°F (21°C) AS-175 THE RIGHT PREP FOR THE RIGHT COATING IT’S THIS SIMPLE: First, clean the floor of grease and oil, Light Traffic 3-4 12 24 12 24 12 This two-component, low-VOC, waterborne epoxy with and patch or prime if necessary. Then mix the contents of Formulated to complement our many different coatings, each Heavy Traffic 24 48 48 48 48 24 moderate grit is self-sealing and formulated for wet the can(s) thoroughly. Apply with our special phenolic roller— areas. It’s easy to clean and chemical-resistant– perfect product enhances a specific application. Call our technical VOC VOLUMES for barefoot and recreational traffic areas such as pools, support line for the product or application technique that is which builds the correct anti-slip profile as you pull it across locker rooms, showers, pleasure boats, docks, laundries, Pounds/Gallon .34 .82 .5 2.0 0 0 right for you. the surface. Let it dry. You’re done! walkways and decks. Its high rate of coverage makes it an economical choice. Available Grams/Liter 42 98 60 250 0 0 in: light gray, black, and beige. Call our tech support line for the product or application % Solids 68 61 63 71 100 100 AS-250 PS-100WB technique that’s right for you at: 972-438-9111 COEFFICIENT OF FRICTION (ADA MIN. = .6)
This heavy-duty, two-component epoxy with Kevlar® is A primer/sealant specially formulated to increase adhesion Dry 1.3 1.17 .78 1.05 1.1 1.1 formulated for maximum durability under heavy vehicular of our coatings on porous floors, such as concrete, wood and traffic. It’s resistant to fire, acid, alkali, solvent, grease, oil, tile. Our water-based, low odor primer/sealer yields a tough, Wet .9 1.0 .86 1.05 1.0 1.0 long-lasting surface. safety yellow. salt water, detergent, alcohol, gasoline, hydraulic fluid, and AVAILABLE COLORS weather. This makes it ideal for ramps, walkways, forklift traffic, loading docks, ships, stadiums, garages– wherever Cement you need an extremely tough and tenacious anti-slip surface. Available in: gray, black, tile ® PolySpec 100EX Gray red & safety yellow. A penetrating epoxy primer used to prime concrete surfaces Deck Gray for high performance applications,100% solids, moisture AS-2500 Haze Gray tolerant. SPECIAL SOLUTIONS FOR SPECIAL PROBLEMS. This extra heavy-duty, chemically-resistant, two Light Gray component, 100%-solids, zero-VOC, low-odor epoxy AST has the solution to slippery problems, no matter where reinforced with Kevlar® has incredible strength. Its zero- they exist. As the leading technologist in the industry, we Black VOC formula makes it perfect for indoor use in food MS-7CZ work directly with many of our customers to meet their processing and preparation areas, meat packing and Beige unique needs. Our highly specialized products range from poultry operations, breweries, wineries, bakeries, bottling plants and hospitals or any This metal primer is a two-part, epoxy-polyamide primer is Tile Red confined, low ventilation or spark-sensitive area. Available in: gray, black, safety yellow, required prior to application of our anti-slip coatings over heavy-duty, Kevlar®-based, two-component, zero-VOC and fast-drying rapid cure. metal. It provides maximum adhesion, toughness and Safety Yellow corrosion resistance, withstanding even salt and chemical formulations (engineered for maximum impact and chemical resistance) to easy-to-use, single-component, pedestrian Tint Base* AS-2500 LTC attack. (MS-11CZ Low Temp available) traffic formulations that you can apply straight out of the * Tint system - get blurb from Alan K and Steve C. This extra heavy-duty, chemically-resistant, two component, can. If we don’t have the perfect solution for your specific 100%-solids, zero-VOC, low-odor epoxy reinforced with problem area, our lab can create a custom formula, or color, Kevlar® has incredible strength. Its zero-VOC formula makes it perfect for indoor use in food processing and tailor-made for the job. VISIT US AT: WWW.ASTANTISLIP.COM preparation areas, meat packing and poultry operations, breweries, wineries, bakeries, bottling plants and hospitals or any confined, lowventilation 972-438-9111 or spark-sensitive area. Available in: gray, black, safety yellow, and fast-drying rapid cure. WHICH ANTI-SLIP PRODUCT IS RIGHT FOR YOU? APPLICATION AS EASY AS 1, 2, 3. TECHNICAL INFORMATION
AS-2500 LTC AS-75 RezRok® 105 AS-150 HF
AS-175AS-250AS-500 This single-component, low-VOC, elastomeric acrylic RezRok 105 Epoxy Floor Patching Mortar can be used AS-75 polymer is specially formulated for pedestrian traffic and where a paste consistency is required. Excellent for a wide is uniquely compatible with asphalt. It yields a sealed and range of construction and structural repair applications weather-resistant anti-slip surface and can be applied over such as patching significant defects or holes/spalls on damp areas. Clean-up is fast and easy, since it’s water- concrete surfaces prior to applying AST Anti-Slip Coatings. based. Use it on asphalt, primed steel, concrete or wood–walkways, ramps, platforms– EST. COVERAGE IN SQ. FT./GAL anywhere you need a durable, anti-slip surface. Available in: gray, black, and safety yellow. Roller 70 50 90 40 25-35 25-35 OUR PRODUCTS ARE SO EASY TO APPLY YOU CAN Trowel 40 50 40 40 AS-150 HF DO IT YOURSELF. Spray 125 60 120 60 60 60 Because of its single-component formulation you can For all but the biggest jobs, you don’t need a contractor use this Kevlar®-fortified epoxy straight out of the can as EST. POT LIFE IN HOURS needed and then re-seal for future use. Withstands heavy so there is no wasted time and aggravation gathering bids. @70°F (21°C) NA NA 1 4 1 1 pedestrian and light rolling traffic, gasoline, fire, oil, salt You can apply it as needed, when it’s convenient for you water, acid, alkali and aliphatic solvents–and is great for MEETS OSHA, ADA, ASTM, & MILITARY SPECIFICATIONS floors, ramps, decks, entrances, treads, machine shops and manufacturing facilities. (minimizing down time) or on areas too small to interest a
Available in: gray, black, and safety yellow. Also available in a Low VOC Version. A Variety of Tint Bases are Available for AS-75, AS-150HF and AS-175. contractor. Y=Yes Y Y Y Y AS-250 is available in Haze Gray, 5 gal unit only. EST. DRY TIME IN HOURS@70°F (21°C) AS-175 THE RIGHT PREP FOR THE RIGHT COATING IT’S THIS SIMPLE: First, clean the floor of grease and oil, Light Traffic 3-4 12 24 12 24 12 This two-component, low-VOC, waterborne epoxy with and patch or prime if necessary. Then mix the contents of Formulated to complement our many different coatings, each Heavy Traffic 24 48 48 48 48 24 moderate grit is self-sealing and formulated for wet the can(s) thoroughly. Apply with our special phenolic roller— areas. It’s easy to clean and chemical-resistant– perfect product enhances a specific application. Call our technical VOC VOLUMES for barefoot and recreational traffic areas such as pools, support line for the product or application technique that is which builds the correct anti-slip profile as you pull it across locker rooms, showers, pleasure boats, docks, laundries, Pounds/Gallon .34 .82 .5 2.0 0 0 right for you. the surface. Let it dry. You’re done! walkways and decks. Its high rate of coverage makes it an economical choice. Available Grams/Liter 42 98 60 250 0 0 in: light gray, black, and beige. Call our tech support line for the product or application % Solids 68 61 63 71 100 100 AS-250 PS-100WB technique that’s right for you at: 972-438-9111 COEFFICIENT OF FRICTION (ADA MIN. = .6)
This heavy-duty, two-component epoxy with Kevlar® is A primer/sealant specially formulated to increase adhesion Dry 1.3 1.17 .78 1.05 1.1 1.1 formulated for maximum durability under heavy vehicular of our coatings on porous floors, such as concrete, wood and traffic. It’s resistant to fire, acid, alkali, solvent, grease, oil, tile. Our water-based, low odor primer/sealer yields a tough, Wet .9 1.0 .86 1.05 1.0 1.0 long-lasting surface. safety yellow. salt water, detergent, alcohol, gasoline, hydraulic fluid, and AVAILABLE COLORS weather. This makes it ideal for ramps, walkways, forklift traffic, loading docks, ships, stadiums, garages– wherever Cement you need an extremely tough and tenacious anti-slip surface. Available in: gray, black, tile ® PolySpec 100EX Gray red & safety yellow. A penetrating epoxy primer used to prime concrete surfaces Deck Gray for high performance applications,100% solids, moisture AS-2500 Haze Gray tolerant. SPECIAL SOLUTIONS FOR SPECIAL PROBLEMS. This extra heavy-duty, chemically-resistant, two Light Gray component, 100%-solids, zero-VOC, low-odor epoxy AST has the solution to slippery problems, no matter where reinforced with Kevlar® has incredible strength. Its zero- they exist. As the leading technologist in the industry, we Black VOC formula makes it perfect for indoor use in food MS-7CZ work directly with many of our customers to meet their processing and preparation areas, meat packing and Beige unique needs. Our highly specialized products range from poultry operations, breweries, wineries, bakeries, bottling plants and hospitals or any This metal primer is a two-part, epoxy-polyamide primer is Tile Red confined, low ventilation or spark-sensitive area. Available in: gray, black, safety yellow, required prior to application of our anti-slip coatings over heavy-duty, Kevlar®-based, two-component, zero-VOC and fast-drying rapid cure. metal. It provides maximum adhesion, toughness and Safety Yellow corrosion resistance, withstanding even salt and chemical formulations (engineered for maximum impact and chemical resistance) to easy-to-use, single-component, pedestrian Tint Base* AS-2500 LTC attack. (MS-11CZ Low Temp available) traffic formulations that you can apply straight out of the * Tint system - get blurb from Alan K and Steve C. This extra heavy-duty, chemically-resistant, two component, can. If we don’t have the perfect solution for your specific 100%-solids, zero-VOC, low-odor epoxy reinforced with problem area, our lab can create a custom formula, or color, Kevlar® has incredible strength. Its zero-VOC formula makes it perfect for indoor use in food processing and tailor-made for the job. VISIT US AT: WWW.ASTANTISLIP.COM preparation areas, meat packing and poultry operations, breweries, wineries, bakeries, bottling plants and hospitals or any confined, lowventilation 972-438-9111 or spark-sensitive area. Available in: gray, black, safety yellow, and fast-drying rapid cure. WHICH ANTI-SLIP PRODUCT IS RIGHT FOR YOU? APPLICATION AS EASY AS 1, 2, 3. TECHNICAL INFORMATION
AS-2500 LTC AS-75 RezRok® 105 AS-150 HF
AS-175AS-250AS-500 This single-component, low-VOC, elastomeric acrylic RezRok 105 Epoxy Floor Patching Mortar can be used AS-75 polymer is specially formulated for pedestrian traffic and where a paste consistency is required. Excellent for a wide is uniquely compatible with asphalt. It yields a sealed and range of construction and structural repair applications weather-resistant anti-slip surface and can be applied over such as patching significant defects or holes/spalls on damp areas. Clean-up is fast and easy, since it’s water- concrete surfaces prior to applying AST Anti-Slip Coatings. based. Use it on asphalt, primed steel, concrete or wood–walkways, ramps, platforms– EST. COVERAGE IN SQ. FT./GAL anywhere you need a durable, anti-slip surface. Available in: gray, black, and safety yellow. Roller 70 50 90 40 25-35 25-35 OUR PRODUCTS ARE SO EASY TO APPLY YOU CAN Trowel 40 50 40 40 AS-150 HF DO IT YOURSELF. Spray 125 60 120 60 60 60 Because of its single-component formulation you can For all but the biggest jobs, you don’t need a contractor use this Kevlar®-fortified epoxy straight out of the can as EST. POT LIFE IN HOURS needed and then re-seal for future use. Withstands heavy so there is no wasted time and aggravation gathering bids. @70°F (21°C) NA NA 1 4 1 1 pedestrian and light rolling traffic, gasoline, fire, oil, salt You can apply it as needed, when it’s convenient for you water, acid, alkali and aliphatic solvents–and is great for MEETS OSHA, ADA, ASTM, & MILITARY SPECIFICATIONS floors, ramps, decks, entrances, treads, machine shops and manufacturing facilities. (minimizing down time) or on areas too small to interest a
Available in: gray, black, and safety yellow. Also available in a Low VOC Version. A Variety of Tint Bases are Available for AS-75, AS-150HF and AS-175. contractor. Y=Yes Y Y Y Y AS-250 is available in Haze Gray, 5 gal unit only. EST. DRY TIME IN HOURS@70°F (21°C) AS-175 THE RIGHT PREP FOR THE RIGHT COATING IT’S THIS SIMPLE: First, clean the floor of grease and oil, Light Traffic 3-4 12 24 12 24 12 This two-component, low-VOC, waterborne epoxy with and patch or prime if necessary. Then mix the contents of Formulated to complement our many different coatings, each Heavy Traffic 24 48 48 48 48 24 moderate grit is self-sealing and formulated for wet the can(s) thoroughly. Apply with our special phenolic roller— areas. It’s easy to clean and chemical-resistant– perfect product enhances a specific application. Call our technical VOC VOLUMES for barefoot and recreational traffic areas such as pools, support line for the product or application technique that is which builds the correct anti-slip profile as you pull it across locker rooms, showers, pleasure boats, docks, laundries, Pounds/Gallon .34 .82 .5 2.0 0 0 right for you. the surface. Let it dry. You’re done! walkways and decks. Its high rate of coverage makes it an economical choice. Available Grams/Liter 42 98 60 250 0 0 in: light gray, black, and beige. Call our tech support line for the product or application % Solids 68 61 63 71 100 100 AS-250 PS-100WB technique that’s right for you at: 972-438-9111 COEFFICIENT OF FRICTION (ADA MIN. = .6)
This heavy-duty, two-component epoxy with Kevlar® is A primer/sealant specially formulated to increase adhesion Dry 1.3 1.17 .78 1.05 1.1 1.1 formulated for maximum durability under heavy vehicular of our coatings on porous floors, such as concrete, wood and traffic. It’s resistant to fire, acid, alkali, solvent, grease, oil, tile. Our water-based, low odor primer/sealer yields a tough, Wet .9 1.0 .86 1.05 1.0 1.0 long-lasting surface. safety yellow. salt water, detergent, alcohol, gasoline, hydraulic fluid, and AVAILABLE COLORS weather. This makes it ideal for ramps, walkways, forklift traffic, loading docks, ships, stadiums, garages– wherever Cement you need an extremely tough and tenacious anti-slip surface. Available in: gray, black, tile ® PolySpec 100EX Gray red & safety yellow. A penetrating epoxy primer used to prime concrete surfaces Deck Gray for high performance applications,100% solids, moisture AS-2500 Haze Gray tolerant. SPECIAL SOLUTIONS FOR SPECIAL PROBLEMS. This extra heavy-duty, chemically-resistant, two Light Gray component, 100%-solids, zero-VOC, low-odor epoxy AST has the solution to slippery problems, no matter where reinforced with Kevlar® has incredible strength. Its zero- they exist. As the leading technologist in the industry, we Black VOC formula makes it perfect for indoor use in food MS-7CZ work directly with many of our customers to meet their processing and preparation areas, meat packing and Beige unique needs. Our highly specialized products range from poultry operations, breweries, wineries, bakeries, bottling plants and hospitals or any This metal primer is a two-part, epoxy-polyamide primer is Tile Red confined, low ventilation or spark-sensitive area. Available in: gray, black, safety yellow, required prior to application of our anti-slip coatings over heavy-duty, Kevlar®-based, two-component, zero-VOC and fast-drying rapid cure. metal. It provides maximum adhesion, toughness and Safety Yellow corrosion resistance, withstanding even salt and chemical formulations (engineered for maximum impact and chemical resistance) to easy-to-use, single-component, pedestrian Tint Base* AS-2500 LTC attack. (MS-11CZ Low Temp available) traffic formulations that you can apply straight out of the * Tint system - get blurb from Alan K and Steve C. This extra heavy-duty, chemically-resistant, two component, can. If we don’t have the perfect solution for your specific 100%-solids, zero-VOC, low-odor epoxy reinforced with problem area, our lab can create a custom formula, or color, Kevlar® has incredible strength. Its zero-VOC formula makes it perfect for indoor use in food processing and tailor-made for the job. VISIT US AT: WWW.ASTANTISLIP.COM preparation areas, meat packing and poultry operations, breweries, wineries, bakeries, bottling plants and hospitals or any confined, lowventilation 972-438-9111 or spark-sensitive area. Available in: gray, black, safety yellow, and fast-drying rapid cure. WHICH ANTI-SLIP PRODUCT IS RIGHT FOR YOU? APPLICATION AS EASY AS 1, 2, 3. TECHNICAL INFORMATION
AS-2500 LTC AS-75 RezRok® 105 AS-150 HF
AS-175AS-250AS-500 This single-component, low-VOC, elastomeric acrylic RezRok 105 Epoxy Floor Patching Mortar can be used AS-75 polymer is specially formulated for pedestrian traffic and where a paste consistency is required. Excellent for a wide is uniquely compatible with asphalt. It yields a sealed and range of construction and structural repair applications weather-resistant anti-slip surface and can be applied over such as patching significant defects or holes/spalls on damp areas. Clean-up is fast and easy, since it’s water- concrete surfaces prior to applying AST Anti-Slip Coatings. based. Use it on asphalt, primed steel, concrete or wood–walkways, ramps, platforms– EST. COVERAGE IN SQ. FT./GAL anywhere you need a durable, anti-slip surface. Available in: gray, black, and safety yellow. Roller 70 50 90 40 25-35 25-35 OUR PRODUCTS ARE SO EASY TO APPLY YOU CAN Trowel 40 50 40 40 AS-150 HF DO IT YOURSELF. Spray 125 60 120 60 60 60 Because of its single-component formulation you can For all but the biggest jobs, you don’t need a contractor use this Kevlar®-fortified epoxy straight out of the can as EST. POT LIFE IN HOURS needed and then re-seal for future use. Withstands heavy so there is no wasted time and aggravation gathering bids. @70°F (21°C) NA NA 1 4 1 1 pedestrian and light rolling traffic, gasoline, fire, oil, salt You can apply it as needed, when it’s convenient for you water, acid, alkali and aliphatic solvents–and is great for MEETS OSHA, ADA, ASTM, & MILITARY SPECIFICATIONS floors, ramps, decks, entrances, treads, machine shops and manufacturing facilities. (minimizing down time) or on areas too small to interest a
Available in: gray, black, and safety yellow. Also available in a Low VOC Version. A Variety of Tint Bases are Available for AS-75, AS-150HF and AS-175. contractor. Y=Yes Y Y Y Y AS-250 is available in Haze Gray, 5 gal unit only. EST. DRY TIME IN HOURS@70°F (21°C) AS-175 THE RIGHT PREP FOR THE RIGHT COATING IT’S THIS SIMPLE: First, clean the floor of grease and oil, Light Traffic 3-4 12 24 12 24 12 This two-component, low-VOC, waterborne epoxy with and patch or prime if necessary. Then mix the contents of Formulated to complement our many different coatings, each Heavy Traffic 24 48 48 48 48 24 moderate grit is self-sealing and formulated for wet the can(s) thoroughly. Apply with our special phenolic roller— areas. It’s easy to clean and chemical-resistant– perfect product enhances a specific application. Call our technical VOC VOLUMES for barefoot and recreational traffic areas such as pools, support line for the product or application technique that is which builds the correct anti-slip profile as you pull it across locker rooms, showers, pleasure boats, docks, laundries, Pounds/Gallon .34 .82 .5 2.0 0 0 right for you. the surface. Let it dry. You’re done! walkways and decks. Its high rate of coverage makes it an economical choice. Available Grams/Liter 42 98 60 250 0 0 in: light gray, black, and beige. Call our tech support line for the product or application % Solids 68 61 63 71 100 100 AS-250 PS-100WB technique that’s right for you at: 972-438-9111 COEFFICIENT OF FRICTION (ADA MIN. = .6)
This heavy-duty, two-component epoxy with Kevlar® is A primer/sealant specially formulated to increase adhesion Dry 1.3 1.17 .78 1.05 1.1 1.1 formulated for maximum durability under heavy vehicular of our coatings on porous floors, such as concrete, wood and traffic. It’s resistant to fire, acid, alkali, solvent, grease, oil, tile. Our water-based, low odor primer/sealer yields a tough, Wet .9 1.0 .86 1.05 1.0 1.0 long-lasting surface. safety yellow. salt water, detergent, alcohol, gasoline, hydraulic fluid, and AVAILABLE COLORS weather. This makes it ideal for ramps, walkways, forklift traffic, loading docks, ships, stadiums, garages– wherever Cement you need an extremely tough and tenacious anti-slip surface. Available in: gray, black, tile ® PolySpec 100EX Gray red & safety yellow. A penetrating epoxy primer used to prime concrete surfaces Deck Gray for high performance applications,100% solids, moisture AS-2500 Haze Gray tolerant. SPECIAL SOLUTIONS FOR SPECIAL PROBLEMS. This extra heavy-duty, chemically-resistant, two Light Gray component, 100%-solids, zero-VOC, low-odor epoxy AST has the solution to slippery problems, no matter where reinforced with Kevlar® has incredible strength. Its zero- they exist. As the leading technologist in the industry, we Black VOC formula makes it perfect for indoor use in food MS-7CZ work directly with many of our customers to meet their processing and preparation areas, meat packing and Beige unique needs. Our highly specialized products range from poultry operations, breweries, wineries, bakeries, bottling plants and hospitals or any This metal primer is a two-part, epoxy-polyamide primer is Tile Red confined, low ventilation or spark-sensitive area. Available in: gray, black, safety yellow, required prior to application of our anti-slip coatings over heavy-duty, Kevlar®-based, two-component, zero-VOC and fast-drying rapid cure. metal. It provides maximum adhesion, toughness and Safety Yellow corrosion resistance, withstanding even salt and chemical formulations (engineered for maximum impact and chemical resistance) to easy-to-use, single-component, pedestrian Tint Base* AS-2500 LTC attack. (MS-11CZ Low Temp available) traffic formulations that you can apply straight out of the * Tint system - get blurb from Alan K and Steve C. This extra heavy-duty, chemically-resistant, two component, can. If we don’t have the perfect solution for your specific 100%-solids, zero-VOC, low-odor epoxy reinforced with problem area, our lab can create a custom formula, or color, Kevlar® has incredible strength. Its zero-VOC formula makes it perfect for indoor use in food processing and tailor-made for the job. VISIT US AT: WWW.ASTANTISLIP.COM preparation areas, meat packing and poultry operations, breweries, wineries, bakeries, bottling plants and hospitals or any confined, lowventilation 972-438-9111 or spark-sensitive area. Available in: gray, black, safety yellow, and fast-drying rapid cure. WHICH ANTI-SLIP PRODUCT IS RIGHT FOR YOU? TOUGH ENOUGH FOR EVERYTHING FROM FLIGHT DECKS TO FACTORY FLOORS
ANTI-SLIP COATINGS American Safety Technologies (AST) Anti-Slip Coatings for Pedestrian and light Traffic are known for incredible 5X MORE DURABILITY. 5X FEWER toughness and durability. HEADACHES Originally engineered for Constantly replacing conventional anti-slip the flight deck of U.S. coatings can be a real headache. That’s why Anti-Slip Coatings Navy aircraft carriers, AST Anti-Slip Coatings are engineered to last AST coatings withstand up to five times longer than sand-in-paint and other over 15,000 high-impact anti-slip treatments. Five times more durability means five jet landings per year. In what the Navy calls a “controlled times fewer applications; five times less downtime; five times crash”, each 30-ton fighter jet smashes onto the deck, fewer budget problems; and five times fewer scheduling dragging a steel tailhook across the surface at over 170 headaches. With AST, you may even spend five times fewer m.p.h. In addition to this relentless beating, AST Coatings late nights, weekends, and holidays at work applying anti- also withstand some of the most caustic substances in the slip coatings. HEAVY-DUTY ANTI-SLIP COATINGS world including jet fuel, Skydrol hydraulic fluid, grease, oil for Heavy Vehicular or Pedestrian Traffic with and salt spray. If AST Coatings can stand up to the relentless EASY TO APPLY. EASY TO CLEAN Maximum Resistance to Chemicals punishment of fighter jet traffic, they can surely handle your AST Coatings are just as toughest forklift, steel-wheeled, and pedestrian traffic. easy to apply as paint. Simply roll onto a clean, dry, PUT BATTLE-TESTED TOUGHNESS TO WORK FOR YOU uncontaminated floor. Most of Today, companies around the globe are putting AST to the our coatings are ready for light test in a variety of industrial traffic in 12-24 hours, heavy applications. AST Anti-Slip traffic in just 48 hours. AST Coatings have proven Anti-Slip Coatings are easy to exceptionally durable clean, too. They meet the ASTM D-3450 test for washability in the most demanding and easy clean-up. Just sweep, hose off, or run a scrubbing PROVE IT WITH A TEST PATCH environments imaginable machine over the surface with the cleaning solution of your Call today and we will put you in touch with your local AST distributor. They — from blast-furnace hot choice. can apply a test patch in your facility steel mills to Antarctic- that will prove beyond a doubt that cold storage lockers; from EXTRAORDINARY PERFORMANCE FOR THE AST Anti-Slip Coatings will stand up to caustic chemical plants to PRICE OF ORDINARY PAINT anything your plant can dish out. Your waterlogged pulp mills; from the dark, dank holds of ocean AST’s proprietary formulas incorporate coatings professional can also provide going tankers to the sun and weather ravaged surfaces of high tech materials second only an expert floor or concrete analysis, help you place an order, or answer any offshore oil rigs. When we say AST is battletested tough, we to diamonds in hardness and are questions you may have. mean the kind of proven toughness engineered to provide a unique profile that can handle the most punishing of peaks and valleys when rolled
*Prices and specifications subject to change. Kevlar is a registered trademark of DowDuPont. traffic and the harshest chemicals onto a surface. Liquids and other that industry can dish out. AST Anti- contaminants flow into the valleys DISCOVER THE Slip Coatings also exceed strict leaving the high-traction peaks OSHA, ADA, USDA, ASTM and U.S. exposed. If the peaks ever begin to wear away, they expose U.S. NAVY’S Military specifications. fresh grit, providing excellent slip-resistance for years. How much does all of this extraordinary performance and durability cost? Probably not a penny more than what you’re SECRETE WEAPON currently paying. At only $1 to $3/sq. ft., AST Anti-Slip WWW.ASTANTISLIP.COM Coatings cost the same as ordinary industrial floor paints. AGAINST SLIPS
ITW POLYMERS SEALANTS NORTH AMERICA, INC. AND FIGHT AMERICA’S 111 S. Nursery Road, Irving, TX 75060 | Tel: +1 972-438-9111 #1 WORKPLACE KILLER! Fax +1 972-554-3939 | [email protected] | www.itwast.com