DOCSLIB.ORG

Haldex Valve Catalog Quality Parts for Vehicles at Any Life Stage

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Haldex Valve Catalog Quality Parts for Vehicles at Any Life Stage The Haldex Valve Catalog Quality parts for vehicles at any life stage. New and Remanufactured Valves Air Regulating l Check l Drain Emergency Relay l Hand/Foot Control Inversion l Pressure Protection Pressure Relief l Quick Release Relay l Solenoid l Tractor Protection Trailer l Reman Tractor ABS Important Notice The products described within this literature, including without limitation, product features, specifications, designs, availability and pricing are subject to change by Haldex and its subsidiaries at any time without notice. This document and other information from Haldex, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system, in the current literature or catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through their own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements are met. Table of Contents VALVES Table of Contents ............................................................................................................................. TOC1 Part Number Index .............................................................................................................................PN1 Foreward ............................................................................................................................................ FWD1 Relay Valves Haldex (New and Remanufactured) RG2 − 2 Port Trailer Valve ................................................................................................................ 1 RG5 - 2 Port Trailer Valve ................................................................................................................. 2 2-Port - Single Control Line .............................................................................................................. 3 2 Port - Integral Bracket ................................................................................................................... 4 2 Port - Anti-Compounding ............................................................................................................. 5 2 Port - Anti-Compounding − Dual Crack Pressure ....................................................................... 6 2-Port - Without Anti-Compounding - Dual Control .................................................................... 6 2 Port − Fast Air and Balancing (FAB) ............................................................................................. 7 4 Port - Single Control Line .............................................................................................................. 7 4 Port − Vertical Ports ...................................................................................................................... 8 4 Port - Integral Bracket ................................................................................................................... 9 4 Port - Anti-Compounding ............................................................................................................10 4 Port - Anti-Compounding - Dual Crack Pressure .......................................................................10 Mounting Brackets ..........................................................................................................................11 Competitive (New and Remanufactured) Bendix® BP-1 .....................................................................................................................................12 Bendix® BP-R1 ..................................................................................................................................12 Bendix® R-6 ......................................................................................................................................13 Bendix® R-8 ......................................................................................................................................14 Bendix® R-8P ....................................................................................................................................14 Bendix® R-12 .....................................................................................................................................15 Bendix® R-12H ..................................................................................................................................16 Bendix® R-12P ...................................................................................................................................16 Bendix® R-14 .....................................................................................................................................17 Bendix® R-14H ..................................................................................................................................17 Sealco - Ratio ....................................................................................................................................18 Sealco Relay ......................................................................................................................................18 Sealco - Control Line ........................................................................................................................19 Sealco - Mini .....................................................................................................................................19 Sealco - Trailer ................................................................................................................................. 20 Sealco - 3 Port Delivery .................................................................................................................. 20 Hand Control Valves Haldex (New and Remanufactured) Trailer Brake Control - In-Column Mount ......................................................................................21 Trailer Brake Control - Steeing Column Mount .............................................................................21 Trailer Brake Control - Panel Mount ............................................................................................. 22 TOC1 VALVES Table of Contents Hand Control Valves (cont’d) Haldex (New and Remanufactured) Flipper Style - Panel Mount ........................................................................................................... 22 Flipper Style - Locking Handle ....................................................................................................... 23 Double Flipper Style - Panel Mount .............................................................................................. 23 Manifold Dash - Style A ................................................................................................................. 24 Manifold Dash - Style B .................................................................................................................. 25 Push-Pull - Parking Brake ............................................................................................................... 26 Push-Pull - Trailer Air Supply .......................................................................................................... 26 Push-Pull - Tactor Parking .............................................................................................................. 27 Push-Pull - Panel Mount ................................................................................................................. 27 Push-Pull - Bulkhead Mount .......................................................................................................... 28 Push-Pull - Hostler Valve ................................................................................................................ 28 Push Style ........................................................................................................................................ 29 Competitive (New and Remanufactured) Bendix® HPP-1 - Push-Pull .............................................................................................................. 29 Bendix® PP-1 - Push-Pull ................................................................................................................. 30 Bendix® PP-2 - Push-Pull ..................................................................................................................31 Bendix® PP-3 - Push-Pull ................................................................................................................. 32 Bendix® PP-5 - Push-Pull ................................................................................................................. 33 Bendix® PP-7 - Trailer Supply .......................................................................................................... 34 Bendix® PP-8 - Push-Pull ................................................................................................................. 35 Bendix® PP-DC ................................................................................................................................. 35 Bendix® MV-2 - Manifold ............................................................................................................... 36 Bendix® MV-3 - Manifold ..............................................................................................................
Load more

Recommended publications
  • Windows Command Prompt Cheatsheet
    Windows Command Prompt Cheatsheet - Command line interface (as opposed to a GUI - graphical user interface) - Used to execute programs - Commands are small programs that do something useful - There are many commands already included with Windows, but we will use a few. - A filepath is where you are in the filesystem • C: is the C drive • C:\user\Documents is the Documents folder • C:\user\Documents\hello.c is a file in the Documents folder Command What it Does Usage dir Displays a list of a folder’s files dir (shows current folder) and subfolders dir myfolder cd Displays the name of the current cd filepath chdir directory or changes the current chdir filepath folder. cd .. (goes one directory up) md Creates a folder (directory) md folder-name mkdir mkdir folder-name rm Deletes a folder (directory) rm folder-name rmdir rmdir folder-name rm /s folder-name rmdir /s folder-name Note: if the folder isn’t empty, you must add the /s. copy Copies a file from one location to copy filepath-from filepath-to another move Moves file from one folder to move folder1\file.txt folder2\ another ren Changes the name of a file ren file1 file2 rename del Deletes one or more files del filename exit Exits batch script or current exit command control echo Used to display a message or to echo message turn off/on messages in batch scripts type Displays contents of a text file type myfile.txt fc Compares two files and displays fc file1 file2 the difference between them cls Clears the screen cls help Provides more details about help (lists all commands) DOS/Command Prompt help command commands Source: https://technet.microsoft.com/en-us/library/cc754340.aspx.
    [Show full text]
  • Expression Definition FS.COMMAND Qualifier. Operates on a File System Command
    Expression Definition FS.COMMAND Qualifier. Operates on a file system command. The user can issue multiple commands on a file transfer portal. (For example, ls to list files or mkdir to create a directory). This expression returns the current action that the user is taking. Possible values: Neighbor, login, ls, get, put, rename, mkdir, rmdir, del, logout, any. Following is an example: Add authorization policy pol1 “fs.command eq login && (fs.user eq administrator || fs.serverip eq 10.102.88.221 –netmask 255.255.255.252)” allow FS.USER Returns the user who is logged on to the file system. FS.SERVER Returns the host name of the target server. In the following example, the string win2k3-88-22 is the server name: fs.server eq win2k3-88-221 FS.SERVERIP Returns the IP address of the target server. FS.SERVICE Returns a shared root directory on the file server. If a particular folder is exposed as shared, a user can directly log on to the specified first level folder. This first level folder is called a service. For example, in the path \\hostname\SERVICEX\ETC, SERVICEX is the service. As another example, if a user accesses the file \\hostname\service1\dir1\file1.doc, FS.SERVICE will return service1. Following is an example: fs.service notcontains New FS.DOMAIN Returns the domain name of the target server. FS.PATH Returns the complete path of the file being accessed. For example, if a user accesses the file \\hostname\service1\dir1\file1.doc, FS.PATHwill return \service\dir1\file1.doc. Following is an example: fs.path notcontains SSL Expression Definition FS.FILE Returns the name of the file being accessed.
    [Show full text]
  • Powerview Command Reference
    PowerView Command Reference TRACE32 Online Help TRACE32 Directory TRACE32 Index TRACE32 Documents ...................................................................................................................... PowerView User Interface ............................................................................................................ PowerView Command Reference .............................................................................................1 History ...................................................................................................................................... 12 ABORT ...................................................................................................................................... 13 ABORT Abort driver program 13 AREA ........................................................................................................................................ 14 AREA Message windows 14 AREA.CLEAR Clear area 15 AREA.CLOSE Close output file 15 AREA.Create Create or modify message area 16 AREA.Delete Delete message area 17 AREA.List Display a detailed list off all message areas 18 AREA.OPEN Open output file 20 AREA.PIPE Redirect area to stdout 21 AREA.RESet Reset areas 21 AREA.SAVE Save AREA window contents to file 21 AREA.Select Select area 22 AREA.STDERR Redirect area to stderr 23 AREA.STDOUT Redirect area to stdout 23 AREA.view Display message area in AREA window 24 AutoSTOre ..............................................................................................................................
    [Show full text]
  • Braking Systems in Railway Vehicles
    International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 Vol. 4 Issue01,January-2015 Braking Systems in Railway Vehicles Rakesh Chandmal Sharma1 , Manish Dhingra2, Rajeev Kumar Pathak3 1Department of Mechanical Engineering, M. M. University, Mullana (Ambala) INDIA, 2Department of Mechanical Engineering, T. M. University, Moradabad INDIA 3Department of Mechanical Engg, Rakshpal Bahahur College of Engg. and Tech., Bareilly INDIA Abstract— Brake is an essential feature in order to retard and Researchers in the past have investigated different stop the railway vehicle within minimum possible time. This aspects of braking of railway vehicle. Bureika & Mikaliunas paper presents a discussion about the different braking [1] provided the calculations for Vehicle Braking Force systems used in railway vehicles. This paper also considers Fitted with UIC Air Brake for Passenger Trains, Wagon electrodynamic and electromagnetic braking of trains, which is Braking Force Fitted with a UIC Air Brake for Freight of particular importance in high-speed trains. The calculation Trains Wagon, Braking Distance. Liudvinavicius & Lingaitis for stopping distance for railway vehicle is provided in this [2] studied different features and related mathematics of study. electrodynamic braking in high‐speed trains. Vernersson [3] developed a dimensional finite element model of block and Keywords— Air brake; Straight air brake system; Automatic air brake system; Braking distance; Brake cylinder; Brake pipe; Vacuum brake; wheel, which was coupled through a contact interface for the Brake delay time purpose of control of heat generation and also the heat partitioning at block-wheel surface through thermal contact I. INTRODUCTION resistances. Influence of temperature in wheels and brake The brakes are used on the coaches of railway trains to block at rail tread braking was analyzed under brake rig enable deceleration, control acceleration (downhill) or to conditions in the later part of study by Vernersson [4].
    [Show full text]
  • Design and Analysis of the Eddy Current Brake with the Winding Change
    ISSN (Print) 1226-1750 ISSN (Online) 2233-6656 Journal of Magnetics 22(1), 23-28 (2017) https://doi.org/10.4283/JMAG.2017.22.1.023 Design and Analysis of the Eddy Current Brake with the Winding Change Sooyoung Cho1, Huai-Cong Liu1, Ju Lee1, Chang-Moo Lee2, Sung-Chul Go3, Sang-Hwan Ham4, Jong-Hyuk Woo1, and Hyung-Woo Lee5* 1Department of Electrical Engineering, Hanyang University, Seoul, 04763, Republic of Korea 2Korea Railroad Research Institute, Uiwang 16105, Republic of Korea 3Samsung Electronics Company, Ltd., Suwon, Gyeongi-do, 16677, Republic of Korea 4School of Electrical Engineering, Kyungil University, Gyeongsan, 38428, Republic of Korea 5Department of Railway Vehicle System Engineering, Korea National University of Transportation, Uiwang, 16106, Republic of Korea (Received 24 January 2017, Received in final form 16 February 2017, Accepted 21 February 2017) This paper is a study of the eddy current brake designed to replace the air brake of railway application. The eddy current brake has the advantage of being able to take a high current density compared to the other application because this brake is used for applying brakes to the rolling stock for a shorter amount of time. Also, this braking system has the merit of being able to take a high current density at low speed rather than at high speed, because the heat generated by the low speed operation is less than that of the high speed operation. This paper also presents a method of improving the output torque of the eddy current brake at low speed operation through a change of the winding as well as the basic design.
    [Show full text]
  • Learning Objectives ECHO Commands. Command. 10. Explain
    . SA Learning Objectives After completing this chapter you will be able to: 1. List commands used in batch files. 2. List and explain batch file rules. 3. Use a batch file with a shortcut. 3. Explore the function of the REM, 4. Use the SHIFT command to move param- ECHO commands. eters. 4. Explain the use of batch files with shortcuts. 5. Use the IF command with strings for condi- 5. Explain the purpose and function of the tional processing. GOTO command. 6. Test for null values in a batch file. 6. Explain the purpose and function of the 7. Use the IF EXIST /IF SHIFT command. test for the existence of a file or a 7. Explain the purpose and function of the IF subdirectory. command. 8. Use the SET command. 8. Explain the purpose and function of the IF 9. Use the environment and environmental EXIST /IF variables in batch files. 9. Explain the purpose and function of the IF 10. Use the IF ERRORLEVEL command ERRORLEVEL command. XCOpy to write a batch file for testing exit 10. Explain the purpose and function of writing codes. programs. 11. Use the FOR...IN...OO command for repeti- 11. Explain the purpose and function of the tive processing. environment and environmental variables. 12. Use the CALL command in a batch file. 12. Explain the use of the SET command. 13. Explain the purpose and function of the Chapter Overview FOR...IN...OO command. You learned in Chapter 10 how to write simple 14. Explain the purpose and function of the batch files and use replaceable parameters.
    [Show full text]
  • Linux Networking 101
    The Gorilla ® Guide to… Linux Networking 101 Inside this Guide: • Discover how Linux continues its march toward world domination • Learn basic Linux administration tips • See how easy it can be to build your entire network on a Linux foundation • Find out how Cumulus Linux is your ticket to networking freedom David M. Davis ActualTech Media Helping You Navigate The Technology Jungle! In Partnership With www.actualtechmedia.com The Gorilla Guide To… Linux Networking 101 Author David M. Davis, ActualTech Media Editors Hilary Kirchner, Dream Write Creative, LLC Christina Guthrie, Guthrie Writing & Editorial, LLC Madison Emery, Cumulus Networks Layout and Design Scott D. Lowe, ActualTech Media Copyright © 2017 by ActualTech Media. All rights reserved. No portion of this book may be reproduced or used in any manner without the express written permission of the publisher except for the use of brief quotations. The information provided within this eBook is for general informational purposes only. While we try to keep the information up- to-date and correct, there are no representations or warranties, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the information, products, services, or related graphics contained in this book for any purpose. Any use of this information is at your own risk. ActualTech Media Okatie Village Ste 103-157 Bluffton, SC 29909 www.actualtechmedia.com Entering the Jungle Introduction: Six Reasons You Need to Learn Linux ....................................................... 7 1. Linux is the future ........................................................................ 9 2. Linux is on everything .................................................................. 9 3. Linux is adaptable ....................................................................... 10 4. Linux has a strong community and ecosystem ........................... 10 5.
    [Show full text]
  • Nat'l Highway Traffic Safety Admin., DOT § 570.57
    Nat’l Highway Traffic Safety Admin., DOT § 570.57 [(A ¥ B) / A] × 100 (c) Vacuum brake system integrity. (1) The vacuum brake system shall dem- The engine must be operating when onstrate integrity by meeting the fol- power-assisted brakes are checked. lowing requirements: (d) Brake hoses, master cylinder, tubes (i) The vacuum brake system shall and tube assemblies. Hydraulic brake provide vacuum reserve to permit one hoses shall not be mounted so as to service brake application with a brake contact the vehicle body or chassis. pedal force of 50 pounds after the en- Hoses shall not be cracked, chafed, or gine is turned off without actuating flattened. Brake tubes shall not be flat- the low vacuum indicator. tened or restricted. Brake hoses and tubes shall be attached or supported to (ii) Trailer vacuum brakes shall oper- prevent damage by vibration or abra- ate in conjunction with the truck or sion. Master cylinder shall not show truck tractor brake pedal. signs of leakage. Hose or tube protec- (2) Inspection procedure. (i) Check the tive rings or devices shall not be con- trailer vacuum system by coupling sidered part of the hose or tubing. trailer(s) to truck or truck tractor and (1) Inspection procedure. Examine vis- opening trailer shutoff valves. Start ually brake master cylinder, hoses and the engine and after allowing approxi- tubes, including front brake hoses, mately 1 minute to build up the vacu- through all wheel positions from full um, apply and release the brake pedal. left turn to full right turn for condi- In the case of trailer brakes equipped tions indicated.
    [Show full text]
  • Niagara Networking and Connectivity Guide
    Technical Publications Niagara Networking & Connectivity Guide Tridium, Inc. 3951 Westerre Parkway • Suite 350 Richmond, Virginia 23233 USA http://www.tridium.com Phone 804.747.4771 • Fax 804.747.5204 Copyright Notice: The software described herein is furnished under a license agreement and may be used only in accordance with the terms of the agreement. © 2002 Tridium, Inc. All rights reserved. This document may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form without prior written consent from Tridium, Inc., 3951 Westerre Parkway, Suite 350, Richmond, Virginia 23233. The confidential information contained in this document is provided solely for use by Tridium employees, licensees, and system owners. It is not to be released to, or reproduced for, anyone else; neither is it to be used for reproduction of this control system or any of its components. All rights to revise designs described herein are reserved. While every effort has been made to assure the accuracy of this document, Tridium shall not be held responsible for damages, including consequential damages, arising from the application of the information given herein. The information in this document is subject to change without notice. The release described in this document may be protected by one of more U.S. patents, foreign patents, or pending applications. Trademark Notices: Metasys is a registered trademark, and Companion, Facilitator, and HVAC PRO are trademarks of Johnson Controls Inc. Black Box is a registered trademark of the Black Box Corporation. Microsoft and Windows are registered trademarks, and Windows 95, Windows NT, Windows 2000, and Internet Explorer are trademarks of Microsoft Corporation.
    [Show full text]
  • Brakes Andrelated Systems
    BRAKES ALL MODELS Air Brake Modifications Certification Procedures For DOT FMVSS-121 The Federal Department of Transportation's Motor Vehicle Safety Standard 121 required that virtually all trucks equipped with air brakes and manufactured on or after March 1, 1975 must comply with a comprehensive set of design and performance parameters concerning the air brakes and related systems. Of the many requirements of FMVSS 121, two are of primary concern between the truck manufacturer and the body and allied equipment manufacturer. The first concern is the center of gravity location on a truck used for compliance testing and the second involves the tubing and air flow design of the brake system. Cautions - FMVSS-121 Air Brake System Modifications CAUTION: If wheelbase alterations are made to International vehicles with FMVSS-121 brakes: • DO NOT make alterations to air lines with hose, piping or fittings of sizes other than those currently in use on the truck. • DO NOT allow sharp bends or other constrictions in hosing. • DO NOT exceed the minimum or maximum wheelbase available from the factory for that model after lengthening or shortening the wheelbase. For wheelbases longer or shorter than those available from the factory, International will provide verbal opinion (through contacting your local International dealer). International will be available to provide certification testing and documentation of compliance or non-compliance with FMVSS-121 for the specific situation at an additional cost. dy Builder Diagrams (CT-471) 2010 October, CAUTION: Air reservoirs may be relocated providing these guidelines are followed: • DO NOT make alterations to air lines with hose, piping or fittings of sizes other than those currently in use on the truck.
    [Show full text]
  • Design and Analysis of Electromagnetic Breaking System
    ISSN(Online): 2319-8753 ISSN (Print): 2347-6710 International Journal of Innovative Research in Science, Engineering and Technology (A High Impact Factor, Monthly, Peer Reviewed Journal) Visit: www.ijirset.com Vol. 9, Issue 2, February 2020 Design and Analysis of Electromagnetic Breaking System A.Harris1, J.Joseph Ajith Kumar1, Jibin Sam Mathew1, T.Karthikeyan1, J.Y.Arthur Jebaraj2, I.Neethi Manickam2, S.Shiek Sulaiman2 Final year students, Department of Mechanical Engineering, Francis Xavier Engineering College, Tirunelveli, Tamil Nadu, India1. Professor, Department of Mechanical Engineering, Francis Xavier Engineering College, Tirunelveli, Tamil Nadu, India2 ABSTRACT: This project is a new technology in braking system. Electromagnetic braking system is used in light motor and heavy motor vehicle like buses, truck, etc. An Electromagnetic Braking system uses Magnetic force to engage the brake, but the power required for braking is transmitted manually. The electromagnetic braking systems are also called electro-mechanical brake .In Future we can use this braking system to avoid the accidents. An electromagnetic braking system uses a magnetic force to apply brake. The power source used in the electromagnetic break is electric current. The electric power applied to the magnetic coil developes the magnetic field in armature coil and attracts the electromagnet aluminum disc. Applying brake to stop the vehicle. I. INTRODUCTION A brake is a device which inhibits motion. Its opposite component is a clutch. Most commonly brakes use friction to convert kinetic energy into heat, though other methods of energy conversion may be employed. For example regenerative braking converts much of the energy to electrical energy, which may be stored for later use.
    [Show full text]
  • SUPERTRAK EX4650, EX8650, EX8654, EX8658, EX16650 USER MANUAL Version 3.0 SR3 Supertrak EX Series User Manual
    SUPERTRAK EX4650, EX8650, EX8654, EX8658, EX16650 USER MANUAL Version 3.0 SR3 SuperTrak EX Series User Manual Copyright © 2009 Promise Technology, Inc. All Rights Reserved. Copyright by Promise Technology, Inc. (Promise Technology). No part of this manual may be reproduced or transmitted in any form without the expressed, written permission of Promise Technology. Trademarks Promise, and the Promise logo are registered in U.S. Patent and Trademark Office. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Important data protection information You should back up all data before installing any drive controller or storage peripheral. Promise Technology is not responsible for any loss of data resulting from the use, disuse or misuse of this or any other Promise Technology product. Notice Although Promise Technology has attempted to ensure the accuracy of the content of this manual, it is possible that this document may contain technical inaccuracies, typographical, or other errors. Promise Technology assumes no liability for any error in this publication, and for damages, whether direct, indirect, incidental, consequential or otherwise, that may result from such error, including, but not limited to loss of data or profits. Promise Technology provides this publication “as is” without warranty of any kind, either express or implied, including, but not limited to implied warranties of merchantability or fitness for a particular purpose. The published information in the manual is subject to change without notice. Promise Technology reserves the right to make changes in the product design, layout, and driver revisions without notification to its users. This version of the User Manual supersedes all previous versions.
    [Show full text]