Integrated Bandsaw Cutting Center Combining Higher Quality with Reliable Sandmeyer Service
The Center was Sandmeyer Steel designed to process Company has once our largest full-size again demonstrated plates. As a result, we can provide a cut piece as our commitment to large as 124" wide and 274" being the premier cutting long. Additionally, the saws can cut narrow bars. This is especially useful Get the edge you need service organization in for supplying bars cut from plate for non-standard bar sizes and types. from Sandmeyer the Stainless Steel and Sandmeyer Steel Company offers Nickel Alloy Plate bandsaw cutting, abrasive water jet Do your manufacturing business. cutting, plasma cutting, and extensive and machining processes machining capabilities up to 124" demand that part size (3150 mm) OD under one roof. When variation is eliminated? matched with our outstanding service If so, bandsaw cutting provides a and our 18 million pound inventory of better edge quality than plasma Stainless Steel and Nickel Alloy Plate, cutting, virtually eliminating taper and Sandmeyer’s Bandsaw Cutting Center out-of-square edges. A programmable provides the complete package for a controller ensures accurate and cutting service operation! repeatable cutting head and plate feed movements. This means on-size and in-tolerance parts each and every time. And, of course, a bandsaw cut edge does not have a heat-affected Sandmeyer Steel Company’s zone to machine through, saving integrated Bandsaw Cutting Center you both time and tooling costs. consists of four state-of-the-art Tolerances within .125" (3.2 mm) can KASTO saws and a 15-ton material be maintained on both the width and handling system. the length of every piece.
Contact a Sandmeyer Sales Thickness Range .1875" (4.8 mm) to 6.0" (152.4 mm) Professional at 800-523-3663, email us at Maximum Cut Piece Size 124" x 274" (3149.6 mm x 6959.6 mm) [email protected], Maximum Piece Weight 15 tons or visit us at www.Bandsaw-Cutting.com Within .125" (3.2 mm) width and length for more information. Tolerances Edges perpendicular and parallel to within .0625" (1.6 mm) Fully-automated cutting head and plate feed Features At Sandmeyer Steel Company, assures accuracy and repeatability of every cut it’s about cutting steel, not corners.
www.SandmeyerSteel.com Providing Solutions, With Materials and BSC 04/2016 5M Value Added Products, for Process Industries