DOCSLIB.ORG

Multi Format 4K LCD Monitor Operation Manual V1 .2

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Multi Format 4K LCD Monitor Operation Manual V1 .2 Multi Format 4K LCD Monitor Operation Manual_v1 .2 LUM-171G Contents ......... 1. Caution .............................................................................. 04 2. Main Features .............................................................................. 06 3. Controls & Functions.................................................................... 07 4. Menu Organization & Adjustment ................................................. 11 5. Menu Operations ......................................................................... 14 [1] PICTURE & VIDEO ................................................................... 14 ... [2] COLOR ............................................................................... 15 .......... [3] GPI .............................................................................. 17 [4] MARKER ............................................................................... 19 [5] WAVE & FOCUS ...................................................................... 21 ..... [6] AUDIO ............................................................................... 23 [7] DISPLAY & SET ...................................................................... 24 [8] SIGNAL INFORMATION ........................................................... 26 6. Other Functions ......................................................................... 27 7. Video Support Resolution ........................................................... 28 8. Product Specifications ................................................................ 30 4K LCD Monitior 3 1. Caution 1. Caution ● Always use set voltage. • Never insert an object into the product • Upon completion of service or repair work, • When relocating the product placed on a cart, ● AC 100 ~ 240V (1.6A/50~60Hz) through vents or openings. High voltage flows request the service technician to perform safety it must be moved with the utmost care. ● DC 12V in the product, and inserting an object can checks to ensure that the product is in proper Sudden stops, excessive force and uneven floor cause electric shock and/or short internal parts. operating condition. surface can cause the product to fall from the • All operating instructions must be read and For the same reason, do not spill water or liquid cart. understood before the product is operated. on the product. • When mounting the product on a wall or ceiling, be sure to install the product • The vents and other openings in the cabinet • These safety and operating instructions must • Do not attempt to service the product yourself. according to the method recommended by the are designed for ventilation. Do not cover or be kept in safe place for future reference. Removing covers can expose you to high manufacturer. block these vents and openings since voltage and other dangerous conditions. insufficient ventilation can cause overheating • All warnings on the product and in the Request a qualified service person to perform • Unplug the power cord from the AC outlet and/or shorten the life of the product. Do not instructions must be observed closely. servicing. before cleaning the product. Use a damp cloth place the product on a bed, sofa, rug or other to clean the product. Do not use liquid cleaners similar surface, since they can block ventilation • All operating instructions must be followed. • If any of the following conditions occurs, or aerosol cleaners. openings. This product is not designed for unplug the power cord from the AC outlet, and built-in installation; do not place the product • Do not use attachments not recommended request a qualified service person to perform • Unplug the power cord from the AC outlet if in an enclosed place such as a bookcase or by the manufacturer. Use of inadequate repairs. you do not use the product for considerably rack, unless proper ventilation is provided or attachments can result in accidents. a. When the power cord or plug in damaged. long time. the manufacturer’s instructions are followed. b. When a liquid was spilled on the product or • This product must be operated on a power when objects have fallen into the product. • Do not use the product near water, such as • The LCD panel used in this product is made of source specified on the specification label. c. When the product has been exposed to rain bathtub, washbasin, kitchen sink and laundry glass. Therefore, it can break when the product If you are not sure of the type of power supply or water. tub, swimming pool and in a wet basement. is dropped or applied with impact. Be careful used in your home, consult your dealer or local d. When the product does not operate properly not to be injured by broken glass pieces in case power company. For units designed to operate as described in the operating instructions. Do • Keep the product away from direct rays of the the LCD panel breaks. on batteries or another power source, refer to not touch the controls other than those Sun-light. the operating instructions. described in the operating instructions. • Keep the product away from heat sources Improper adjustment of controls not described • Do not place the product on an unstable cart, such as radiators, heaters, stoves and other heat • The power cords must be routed properly in the instructions can cause damage, which stand, tripod or table. Placing the product on generating products (including amplifiers). to prevent people from stepping on them or often requires extensive adjustment work by a an unstable base can cause the product to fall, objects from resting on them. Check the cords qualified technician. resulting in serious personal injuries as well as at the plugs and product. e. When the product has been dropped or damage to the product. Use only a cart, stand, damaged. tripod, bracket or table recommended by the • In case of using other DC 12V/24V (LVM-176W), f. When the product displays an abnormal manufacturer or sold with the product. When 12V (LVM-246W)adapters instead of the condition. Any noticeable abnormality in mounting the product on a wall, be sure to standard adapter provided by the the product indicates that the product needs follow the manufacturer’s instruction. Use only manufacturer, please check the proper load servicing. the mounting hardware recommended by the capacity (or current capacity) and use an manufacturer. adapter with stable voltage. • In case the product needs replacement parts, make sure that the service person uses • Do not overload AC outlets or extension cords. replacement parts specified by the Overloading can cause fire or electric shock. manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. 4 4K LCD Monitor 4K LCD Monitor 5 2. Main Features 3. Controls & Functions LUM-171G Monitor contains the following features : LUM-171G: FRONT ● Compatible with various SDI signal ● Ethernet & USB support formats - Supports Ethernet and USB connection for - This product is compatible with various SDI program download, monitor control and signals - 720P, 1080p. color calibration. POWER SOURCE ● Compatible with various Digital signal ● HDMI(2.0) support POWER SCAN formats - 1 x HDMI(2.0) input is available without SOURCE - This product is compatible with various HDMI additional equipment. ASPECT SCANMARKER Digital signals- 50p, 59.94p, 60p. F1ASPECT ● 3G-SDI support F2MARKER ● 4K(SMPTE 428-1-2006 : 4096 x2160@24p - Supports 3G-SDI YCbCr/RGB 4:4:4 and YCbCr F1F3 / SMPTE ST 2036-1:2009 : 3840x2160 4:2:2 formats. MENU/F2 @23.98p~ 60p) support F3EXIT - 6G/ 12G is supported only in SDI A, SDI B ● UP/DOWN Additional features /ENTERMENU/ modes. - Wide Viewing Angle, Active Loop EXIT UP/DOWNUSB Through(SDI), VESA Mounting Standard and AUDIO/ENTER OUT ● Cooling Fan support OSD user interface. USB - Helps maintain optimal internal operating * Max. Brightness: 450cd/㎡, Contrast ratio: AUDIO OUT temperature. 1400:1 ● Remote control function ● Various Color Gamut support - This product can simply be remote controlled - Supports ITU-R BT. Rec.709, SMPTE-C, EBU, by cable connection without additional DCI-P3(Color standard of digital cinema), peripheral equipment attached to unit. Rec.2020, and Panel Native. LUM-171G : REAR ● RS422 protocol support - This product supports protocols provided by TVLogic. RS-422 OUT RS-422 IN RS-422 OUT RS-422 IN SDI-A~D IN SDI-A~D OUT SDI-A~D IN SDI-A~D OUT ~AC IN DC 12V IN LAN HDMI AUDIO-IN REMOTE ~AC IN DC 12V IN LAN HDMI AUDIO-IN REMOTE 6 4K LCD Monitor 4K LCD Monitor 7 3. Controls & Functions 3. Controls & Functions FRONT FRONT ● [SOURCE] Button 8). WAVEFORM ● [SCAN] Button ● [MENU/EXIT] Button - Used to select an input signal among HDMI, - Used to activate/deactivate various forms of - Used to activate various scan mode (Zero - Used to activate/deactivate the OSD menu. SDI-A, SDI-B, SDI-C, SDI-D, 2SI(2CH), 2SI(4CH), Waveform and Vectorscope. Scan, 2:1 Scan, 1:1 Scan, Fit Width, Over Scan) - Press the MENU button again to deactivate UD MODE(4CH). - Waveform only, Vectorscope only, the OSD menu. Waveform+Vectorscope, Waveform Wide ● [ASPECT] Button ● [F1 ~ F3] Button/Lamp - Used to select ASPECT mode. Available ● [UP/DOWN/ENTER] Knob - Shortcut keys for KEY MAPPING features in 9). RANGE ERROR aspect modes are 16:9, 4:3, 2.35:1, 1.85:1, 15:9, - Used to move up/down through the menus the OSD MENU. - Used to activate/deactivate the Range Error 16:10 and Auto. during the OSD menu activation and also to - Selectable options are as follows: function.
Load more

Recommended publications
  • Tau-100 Test Report S/N: 02280382
    TAU-100 TEST REPORT S/N: 02280382 Prepared by: Aaron Sivacoe Date: April 8, 2005 Contents Contents ____________________________________________________________________ 2 Test Equipment______________________________________________________________ 3 Performance Specifications ____________________________________________________ 4 Visual Power Output Rating ___________________________________________________ 4 Visual Power Adjustment Capability ____________________________________________ 5 Aural Power Output Rating ___________________________________________________ 6 Carrier Frequency Tolerance __________________________________________________ 8 Visual Frequency Response __________________________________________________ 11 Intermodulation Distortion ___________________________________________________ 14 Spurious Emissions_________________________________________________________ 16 Modulation _______________________________________________________________ 18 K Pulse to Bar (Kpb) Rating__________________________________________________ 19 2T Pulse K (K2T) Rating ____________________________________________________ 20 Chrominance-Luminance Gain Inequality _______________________________________ 21 Chrominance-Luminance Delay Inequality ______________________________________ 22 Differential Gain Distortion __________________________________________________ 23 Differential Phase Distortion _________________________________________________ 24 Group Delay Response ______________________________________________________ 25 Horizontal Timing__________________________________________________________
    [Show full text]
  • Iq-Analyzer Manual
    iQ-ANALYZER User Manual 6.2.4 June, 2020 Image Engineering GmbH & Co. KG . Im Gleisdreieck 5 . 50169 Kerpen . Germany T +49 2273 99 99 1-0 . F +49 2273 99 99 1-10 . www.image-engineering.de Content 1 INTRODUCTION ........................................................................................................... 5 2 INSTALLING IQ-ANALYZER ........................................................................................ 6 2.1. SYSTEM REQUIREMENTS ................................................................................... 6 2.2. SOFTWARE PROTECTION................................................................................... 6 2.3. INSTALLATION ..................................................................................................... 6 2.4. ANTIVIRUS ISSUES .............................................................................................. 7 2.5. SOFTWARE BY THIRD PARTIES.......................................................................... 8 2.6. NETWORK SITE LICENSE (FOR WINDOWS ONLY) ..............................................10 2.6.1. Overview .......................................................................................................10 2.6.2. Installation of MxNet ......................................................................................10 2.6.3. Matrix-Net .....................................................................................................11 2.6.4. iQ-Analyzer ...................................................................................................12
    [Show full text]
  • 1720/1721 Vectorscope (S/N B060000 & Above) 070-5846-07
    Instruction Manual 1720/1721 Vectorscope (S/N B060000 & Above) 070-5846-07 Warning The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you are qualified to do so. Refer to all safety summaries prior to performing service. www.tektronix.com Copyright E Tektronix, Inc., 1986, 1990, 1993, 1995. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published ma- terial. Specifications and price change privileges reserved. The following are registered trademarks: TEKTRONIX and TEK. For product related information, phone: 800-TEKWIDE (800-835-9433), ext. TV. For further information, contact: Tektronix, Inc., Corporate Offices, P.O. Box 1000, Wilsonville, OR 97070--1000, U.S.A. Phone: (503) 627--7111; TLX: 192825; TWX: (910) 467--8708; Cable: TEKWSGT. WARRANTY Tektronix warrants that this product, that it manufactures and sells, will be free from defects in materials and workmanship for a period of three (3) years from the date of shipment. If any such product proves defec- tive during this warranty period, Tektronix, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product. In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expi- ration of the warranty period and make suitable arrangements for the performance of service. Customer shall be responsible for packaging and shipping the defective product to the service center designated by Tektronix, with shipping charges prepaid.
    [Show full text]
  • Tektronix Television Systems Measurement Concepts 062-1064-00
    Measurement Concepts Television Systems TELEVISION SYSTEM MEASUREMENTS BY GERALD A. EASTMAN MEASUREMENT CONCEPTS INTRODUCTION The primary intent of this book is to acquaint the reader with the functional elements of a television broadcast studio and some of the more common diagnostic and measurement concepts on which video measurement techniques are based. In grouping the functional elements of the broadcasting studio, two areas of primary concern can be identified -- video signal sources and the signal routing path from the source to the transmitter. The design and maintenance of these functional elements is based in large measure on their use and purpose. Understanding the use and purpose of any device always enhances the engineer's or technician's ability to maintain the performance initially designed into the equipment. The functional elements of the broadcast studio will be described in the first portion of this book including a brief discussion of how these functional elements interrelate to form an integrated system. In the broadcasting studio, once the video sources and routing systems are initially established, maintaining quality control of both the sources and the routing path becomes one of the major concerns of the broadcast engineer. Since the picture information is transmitted as a video waveform, quality control can in large measure be accomplished in terms of waveform distortions and subjective picture quality degradations. Four major test waveforms, each designed to observe and measure a specific type of distortion, are commonly used in a broadcast studio. The diagnostic information contained in each waveform will be described in the latter portion of this book in terms of the measurements commonly made with each of the four waveforms.
    [Show full text]
  • Master Thesis
    v v v v vv v v v v v v v v v v v v v v v v v v Fachhochschule Köln Fakultät für Informations-, Medien- und Elektrotechnik Institut für Medien- und Phototechnik Masterstudiengang Medien- und Bildtechnologie Masterarbeit Entwicklung einer Softwareschnittstelle für objektive Analyse der Videobildqualität Borys Golik Matr.-Nr. 11038740 Erstgutachter: Prof. Dr.-Ing. Klaus Ruelberg, Fachhochschule Köln Zweitgutachter: Dipl.-Ing. Dietmar Wueller, Image Engineering 19. Februar 2010 v v v v vv v v v v v v v v v v v v v v v v v v Cologne University of Applied Sciences Faculty of Information, Media and Electrical Engineering Institute of Media and Imaging Technology Degree program of Master of Engineering in Media and Imaging Technology Master Thesis Software Interface for Video Image Quality Analysis Borys Golik Matriculation No. 11038740 First Reviewer: Prof. Dr.-Ing. Klaus Ruelberg, Cologne University of Applied Sciences Second Reviewer: Dipl.-Ing. Dietmar Wueller, Image Engineering February 19, 2010 Zusammenfassung Titel: Entwicklung einer Softwareschnittstelle für objektive Analyse der Videobildqualität Autor: Dipl.-Ing. Borys Golik Gutachter: Prof. Dr. Klaus Ruelberg, Dipl.-Ing. Dietmar Wueller Zusammenfassung: Einer der zentralen Aspekte in der Videoproduktion ist die Frage nach der Bildqualität. Im Bezug auf Messtechnik birgt die Umstellung auf digitale Systeme viel Potenzial, aber auch neue Frage- stellungen. Die Entwicklung und die Umsetzung einer Softwareschnitt- stelle, die eine objektive softwarebasierete Auswertung der Bildqualität ermöglicht, sind ein wesentlicher Bestandteil dieser Arbeit. Der schriftli- che Teil beschreibt ausgewälte Gebiete der Messtechnik im Hinblick auf die Farbmetrik und erläutert die Implementierung der Software. Stichwörter: Video, Bildqualität, Messtechnik Sperrvermerk: Die vorgelegte Arbeit unterliegt keinem Sperrvermerk.
    [Show full text]
  • Critical RF Measurements in Cable, Satellite and Terrestrial DTV Systems
    Application Note Critical RF Measurements in Cable, Satellite and Terrestrial DTV Systems The secret to maintaining reliable and high-quality services over different digital television transmission systems is to focus on critical factors that may compromise the integrity of the system. This application note describes those critical RF measurements which help to detect such problems before viewers lose their service and picture completely. Critical RF Measurements in Cable, Satellite and Terrestrial DTV Systems Application Note Modern digital cable, satellite, and terrestrial systems behave The Key RF parameters quite differently when compared to traditional analog TV as the signal is subjected to noise, distortion, and interferences RF signal strength How much signal is being received along its path. Todays consumers are familiar with simple analog TV reception. If the picture quality is poor, an indoor Constellation diagram Characterizes link and modulator antenna can usually be adjusted to get a viewable picture. performance Even if the picture quality is still poor, and if the program is of MER An early indicator of signal degradation, MER enough interest, the viewer will usually continue watching as (Modulation is the ratio of the power of the signal to the long as there is sound. Error Ratio) power of the error vectors, expressed in dB DTV is not this simple. Once reception is lost, the path EVM EVM is a measurement similar to MER but to recovery isn t always obvious. The problem could be (Error Vector expressed differently. EVM is the ratio of the caused by MPEG table errors, or merely from the RF power Magnitude) amplitude of the RMS error vector to the dropping below the operational threshold or the cliff point.
    [Show full text]
  • Ntsc/Pal Vectorscope
    VOLUME 2 NUMBER 2 NTSC/PAL VECTORSCOPE Leader's Model 5212 represents the new 3-Channel Operation generation of vectorscopes. It is equally at home Despite a multi-fold increase in operating in NTSC and PAL operations, and this will give functions, the front panel of the 5212 remains us an opportunity to compare monitoring aspects simple and familiar. Look at Figure 2-1. The of both systems in this issue. Other operating INPUT selectors show a choice of three features that will be covered include 3-channel channels plus an EXTernal reference. The latter operation, simplified, high-resolution may raise a question because the sync REF key measurements of differential gain and phase, also refers to INT/EXT. So what's EXT doing in precise inter-signal phase measurements, Y/C the INPUT group? The answer is that keying operation, and the use of the vectorscope in EXT in the INPUT group causes the burst of the stereo monitoring. Other aspects include menu- external reference to appear on the vector selected calibration, the use of presets and display. This means that you can overlay one to remote control. three channels and also display the burst of the external reference at the same time. Figure 2-2 Fig. 2-1 Front panel of Leader's NTSC/PAL 3-channel vectorscope, Model 5212. Teleproduction Test is produced by Leader Instruments Corporation, a manufacturer of video, audio and industrial test instruments. Permission is granted to reprint part or all of the contents provided a credit line is included listing the following: Leader Instruments Corporation 6484 Commerce Drive Cypress, CA 9060 1 800 645-5104 • 714 527-7490 Figure 2-2 Three-channel overlay with the burst of the Figure 2-3 Main menu called up by pressing the MENU key external reference on the (B-Y) axis.
    [Show full text]
  • Cable Technician Pocket Guide Subscriber Access Networks
    RD-24 CommScope Cable Technician Pocket Guide Subscriber Access Networks Document MX0398 Revision U © 2021 CommScope, Inc. All rights reserved. Trademarks ARRIS, the ARRIS logo, CommScope, and the CommScope logo are trademarks of CommScope, Inc. and/or its affiliates. All other trademarks are the property of their respective owners. E-2000 is a trademark of Diamond S.A. CommScope is not sponsored, affiliated or endorsed by Diamond S.A. No part of this content may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from CommScope, Inc and/or its affiliates ("CommScope"). CommScope reserves the right to revise or change this content from time to time without obligation on the part of CommScope to provide notification of such revision or change. CommScope provides this content without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. CommScope may make improvements or changes in the products or services described in this content at any time. The capabilities, system requirements and/or compatibility with third-party products described herein are subject to change without notice. ii CommScope, Inc. CommScope (NASDAQ: COMM) helps design, build and manage wired and wireless networks around the world. As a communications infrastructure leader, we shape the always-on networks of tomor- row. For more than 40 years, our global team of greater than 20,000 employees, innovators and technologists have empowered customers in all regions of the world to anticipate what's next and push the boundaries of what's possible.
    [Show full text]
  • The Effects of Single Ended, Push-Pull, and Feedforward Distribution Systems on High Speed Data and Video Signals
    THE EFFECTS OF SINGLE ENDED, PUSH-PULL, AND FEEDFORWARD DISTRIBUTION SYSTEMS ON HIGH SPEED DATA AND VIDEO SIGNALS RONALD J. HRANAC Western Division Engineer JONES INTERCABLE, INC. Englewood, Colorado ABSTRACT Do different types of cable television distribution electronics-- single ended, push-pull, Field testing was conducted to investigate the and feedforward -- have any effect on video or high effects of cable television system electronics on speed data signals in the downstream path? Are video downstream video and high speed data transmission. signals and high speed data signals affected Three system configurations were used for the similarly by cable system characteristics such as testing: a 15 year old single ended 12 channel plant; a frequency response, noise, channel loading, and 3 year old 35 channel push-pull plant; and a 1 year old signal levels? 54 channel feed forward plant. Various RF, video, and digital tests and measurements were performed to To address these questions, several tests and determine if a relationship exists between typical measurements were performed in cable systems cable television system operating characteristics operating with single ended, push-pull, and and the performance of video and high speed data feedforward distribution electronics. Measurements signals on these systems. were made to determine the extent of video delay and phase distortions, data errors, and data waveform INTRODUCTION envelope distortions in the three types of distribution systems. Analog RF tests and Cable television systems have provided operators measurements determined the effects of frequency with an excellent means of delivering entertainment response, carrier to noise, channel loading, signal services to subscribers for over 30 years.
    [Show full text]
  • Instruction Manual 1720SCH-Series Vectorscope/SCH Monitor S/N
    Instruction Manual 1720SCH-Series Vectorscope/SCH Monitor S/N B040000 & Above 070-8341-04 Warning The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you are qualified to do so. Refer to all safety summaries prior to performing service. Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes that in all previously published material. Specifications and price change privileges reserved. Printed in the U.S.A. Tektronix, Inc., P.O. Box 1000, Wilsonville, OR 97070–1000 TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. WARRANTY Tektronix warrants that this product, that it manufactures and sells, will be free from defects in materials and workmanship for a period of three (3) years from the date of shipment. If any such product proves defec- tive during this warranty period, Tektronix, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product. In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expi- ration of the warranty period and make suitable arrangements for the performance of service. Customer shall be responsible for packaging and shipping the defective product to the service center designated by Tektronix, with shipping charges prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Tektronix service center is located.
    [Show full text]
  • TDS3VID Extended Video Application Module User Manual
    User Manual TDS3VID Extended Video Application Module 071-0328-02 *P071032802* 071032802 Copyright E Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes that in all previously published material. Specifications and price change privileges reserved. TEKTRONIX, TEK, TEKPROBE, and TekSecure are registered trademarks of Tektronix, Inc. DPX, WaveAlert, and e*Scope are trademarks of Tektronix, Inc. Contacting Tektronix Tektronix, Inc. 14200 SW Karl Braun Drive P.O. Box 500 Beaverton, OR 97077 USA For product information, sales, service, and technical support: H In North America, call 1-800-833-9200. H Worldwide, visit www.tektronix.com to find contacts in your area. Contents Safety Summary............................. 2 Installing the Application Module................ 5 TDS3VID Features........................... 5 Accessing Extended Video Functions............ 7 Extended Video Conventions................... 10 Changes to the Video Trigger Menu.............. 11 Changes to the Display Menu................... 15 Changes to the Acquire Menu.................. 19 Video QuickMenu............................ 19 Examples.................................. 25 1 Safety Summary To avoid potential hazards, use this product only as specified. While using this product, you may need to access other parts of the system. Read the General Safety Summary in other system manuals for warnings and cautions related to operating the system. Preventing Electrostatic Damage CAUTION. Electrostatic discharge (ESD) can damage components in the oscilloscope and its accessories. To prevent ESD, observe these precautions when directed to do so. Use a Ground Strap. Wear a grounded antistatic wrist strap to discharge the static voltage from your body while installing or removing sensitive components.
    [Show full text]
  • (SN B040000 and Above) PAL/NTSC Vectorscope 070-7635-04
    Instruction Manual 1725 (SN B040000 and Above) PAL/NTSC Vectorscope 070-7635-04 Warning The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you are qualified to do so. Refer to all safety summaries prior to performing service. Copyright E Tektronix, Inc., 1991, 1993, 1995. All rights reserved. Printed in U.S.A. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specifications and price change privileges reserved. The following are registered trademarks: TEKTRONIX and TEK. For further information, contact: Tektronix, Inc., Corporate Offices, P.O. Box 1000, Wilsonville, OR 97070–1000, U.S.A. Phone: (503) 627–7111; TLX: 192825; TWX: (910) 467–8708; Cable: TEKWSGT. Tektronix’ Television Division participates in the Broadcast Professionals Forum (BPFORUM) on the CompuServe Information Service. Press releases on new products, product-specific newsletters, application information and technical papers are among the types of information uploaded. Additionally, product specialists from Tektronix will be “on line” to answer questions regarding product applications, operation and maintenance. Instructions for accessing the information on CompuServe can be found in the current Tektronix Television Products Catalog. CompuServe access is currently available in the U.S.A., Canada, Europe, Japan, Australia, New Zealand, Argentina, Venezuela, Korea, and Taiwan. WARRANTY Tektronix warrants that this product, that it manufactures and sells, will be free from defects in materials and workmanship for a period of three (3) years from the date of shipment. If any such product proves defec- tive during this warranty period, Tektronix, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product.
    [Show full text]