DOCSLIB.ORG

Manual of First & Second Fixing Carpentry

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Manual of First & Second Fixing Carpentry Manual of First & Second Fixing Carpentry Second Edition This page intentionally left blank Manual of First & Second Fixing Carpentry Second Edition Les Goring FIOC, LCG, FTC Associate of the Chartered Institute of Building Former Senior Lecturer in Wood Trades at Hastings College of Arts and Technology Drawings by the author AMSTERDAM • BOSTON • HEIDELBERG • LONDON • NEW YORK • OXFORD PARIS • SAN DIEGO • SAN FRANCISCO • SINGAPORE • SYDNEY • TOKYO Butterworth-Heinemann is an imprint of Elsevier Ltd Linacre House, Jordan Hill, Oxford OX2 8DP 30 Corporate Road, Burlington, MA 01803 First edition 1998 Reprinted 2000, 2002, 2003, 2004 (twice) 2005 Second edition 2007 Copyright © 2007, Les Goring. Published by Elsevier Limited. All rights reserved The right of Les Goring to be identified as the author of this work has been asserted in accordance with the Copyright, Designs and Patents Act 1988 No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the prior written permission of the publisher Permission may be sought directly from Elsevier’s Science & Technology Rights Department in Oxford, UK: phone (ϩ44) (0) 1865 843830; fax (ϩ44) (0) 1865 853333; email: [email protected]. Alternatively you can submit your request online by visiting the Elsevier web site at http://elsevier.com/locate/permissions, and selecting Obtaining permission to use Elsevier material Notice No responsibility is assumed by the publisher for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions or ideas contained in the material herein. Because of rapid advances in the medical sciences, in particular, independent verification of diagnoses and drug dosages should be made British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library Library of Congress Cataloguing in Publication Data A catalogue record for this book is available from the Library of Congress ISBN: 978-0-75-068115-5 For information on all Butterworth-Heinemann publications visit our website at www.books.elsevier.com Typeset by Charon Tec Ltd (A Macmillan Company), Chennai, India www.charontec.com Printed and bound in the UK 070809101110987654321 To Mary, Penny, Jon and Jenny, and other Gorings of whom there are many This page intentionally left blank Contents Preface xiii Acknowledgements xiv Abbreviations xv Technical Data xvi 1 Reading Construction Drawings 1 1.1 Introduction 1 1.2 Orthographic Projection 3 1.3 Oblique Projections 5 2 Tools Required: their Care and Proper Use 8 2.1 Introduction 8 2.2 Marking and Measuring 8 2.3 Handsaws 12 2.4 Hammers 15 2.5 Screwdrivers 16 2.6 Marking Gauges 16 2.7 Chisels 17 2.8 Oilstones and Diamond Whetstones 18 2.9 Hand Planes 19 2.10 Ratchet Brace 20 2.11 Bits and Drills 20 2.12 Individual Handtools 23 2.13 Portable Powered and Cordless Circular Saws 24 2.14 Powered and Cordless Drills and Screwdrivers 25 2.15 Powered and Cordless Planers 26 2.16 Powered and Cordless Jigsaws 27 2.17 Powered and Cordless SDS Rotary Hammer Drills 28 2.18 Powered (Portable) Routers 28 2.19 Jigs 29 2.20 Nailing Guns 30 viii Contents 3 Carpentry Fixing-Devices 34 3.1 Introduction 34 3.2 Nails and Pins 34 3.3 Screws and Plugs 36 3.4 Cavity Fixings 40 4 Making a Carpenter’s Tool Box 41 4.1 Introduction 41 4.2 Construction 41 5 Making Builder’s Plant for Site Use 45 5.1 Saw Stool 45 5.2 Nail Boxes 53 5.3 Hop-ups 54 5.4 Board and Stand 55 5.5 Builder’s Square 56 5.6 Straightedges and Concrete-levelling Boards 58 5.7 Plumb Rules 59 6 Fixing Door Frames, Linings and Doorsets 60 6.1 Introduction 60 6.2 Fixing Door Frames 62 6.3 Frame Detail 64 6.4 Fixing Door Linings 65 6.5 Setting Up Internal Frames Prior to Building Block-partitions 68 6.6 Storey Frames 69 6.7 Subframes 69 6.8 Built-up Linings 70 6.9 Moisture Effect from Wet Plastering Methods 70 6.10 Doorsets 71 6.11 Fire-resisting Doorsets 72 7 Fixing Wooden and uPVC Windows 74 7.1 Introduction 74 7.2 Casement Windows 74 7.3 Glazing 75 7.4 Window Boards 76 7.5 Boxframe Windows 78 8 Fixing Floor Joists and Flooring 80 8.1 Introduction 80 8.2 Ground Floors 81 Contents ix 8.3 Laying T&G Timber Boarding 84 8.4 Floating Floor (with Continuous Support) 85 8.5 Floating Floor (with Discontinuous Support) 85 8.6 Fillet or Battened Floors 86 8.7 Beam-and-Block Floor 87 8.8 Engineered-Timber Floors 87 8.9 Upper Floors 88 8.10 Strutting 91 8.11 Fitting and Fixing Timber Joists 94 8.12 Fixing Flooring Panels on Joists 94 8.13 Fitting and Fixing Engineered Joists 95 8.14 Posi-Joist™ Steel-Web System 98 8.15 Overlay Flooring 101 9 Fixing Interior and Exterior Timber Grounds 104 9.1 Introduction 104 9.2 Skirting Grounds 104 9.3 Architrave Grounds 105 9.4 Apron-lining Grounds 105 9.5 Wall-panelling Grounds 105 9.6 Framed Grounds 106 9.7 External Grounds 106 10 Fixing Stairs and Balustrades 107 10.1 Introduction 107 10.2 Installation Procedure 108 10.3 Fixing Tapered Steps 116 10.4 Fixing Balustrades 118 11 Stair Regulations Guide to Design and Construction 122 11.1 The Building Regulations 2000 122 12 Constructing Traditional and Modern Roofs 131 12.1 Introduction 131 12.2 Basic Roof Designs 132 12.3 Roof Components and Terminology 132 12.4 Basic Setting-out Terms 138 12.5 Geometrical Setting-out of a Hipped Roof 140 12.6 Roofing Ready Reckoner 141 12.7 Metric Rafter Square 143 12.8 Alternative Method for the Use of the Metric Rafter Square 144 12.9 Bevel-formulas for Roofing Square 146 x Contents 12.10 Roofmaster Square 147 12.11 Setting Out a Common (Pattern) Rafter 150 12.12 Setting Out a Crown (or Pin) Rafter 151 12.13 Setting Out a Hip Rafter 152 12.14 Setting Out Jack Rafters 155 12.15 Pitching Details and Sequence 156 12.16 Pitching a Hipped Roof (Double-ended) 159 12.17 Flat Roofs 160 12.18 Dormer Windows and Skylights 164 12.19 Skylights (Roof Windows) 168 12.20 Eyebrow Windows 168 12.21 Lean-to Roofs 174 12.22 Chimney-trimming and Back Gutters 174 12.23 Trussed Rafters 175 12.24 Erection Details and Sequence for Gable Roofs 177 12.25 Hipped Roofs Under 6 m Span 177 12.26 Hipped Roofs Over 6 m Span 178 12.27 Alternative Hipped Roof up to 11 m Span 178 12.28 Valley Junctions 179 12.29 Gable Ladders 179 12.30 Roof Hatch (Trap) 180 12.31 Chimney Trimming 180 12.32 Water-Tank Supports 181 12.33 Work at Height Regulations 2005 182 13 Erecting Timber Stud Partitions 183 13.1 Introduction 183 13.2 Traditional Braced Partition 183 13.3 Traditional Trussed Partition 183 13.4 Modern Stud Partition 184 13.5 Door-stud and Door-head Joints 186 13.6 Stud Joints to Sill and Head Plate 187 13.7 Door-stud and Sill-plate Joints 188 13.8 Corner and Doorway Junctions 189 13.9 Floor and Ceiling Junctions 190 14 Geometry for Arch Shapes 193 14.1 Introduction 193 14.2 Basic Definitions 193 14.3 Basic Techniques 194 14.4 True Semi-elliptical Arches 196 14.5 Approximate Semi-elliptical Arches 198 Contents xi 14.6 Gothic Arches 199 14.7 Tudor Arches 199 14.8 Parabolic Arches 201 14.9 Hyperbolic Arch 201 15 Making and Fixing Arch Centres 203 15.1 Introduction 203 15.2 Solid Turning Piece (Single-rib) 203 15.3 Single-rib Centres 204 15.4 Twin-rib Centres 205 15.5 Four-rib Centres 206 15.6 Multi-rib Centres 208 16 Fixing Architraves, Skirting, Dado and Picture Rails 210 16.1 Architraves 210 16.2 Skirting 214 16.3 Dado Rails and Picture Rails 217 17 Fitting and Hanging Doors 218 17.1 Introduction 218 17.2 Fitting Procedure 218 17.3 Hanging Procedure 223 18 Fitting Locks, Latches and Door Furniture 224 18.1 Locks and Latches 224 18.2 Mortice Locks 224 18.3 Mortice Latches 225 18.4 Mortice Dead Locks 226 18.5 Cylinder Night Latches 226 18.6 Fitting a Letter Plate 226 18.7 Fitting a Mortice Lock 227 18.8 Fitting Door Furniture 228 19 Fixing Pipe Casings and Framed Ducts 229 19.1 Introduction 229 19.2 Pipe Casings 229 19.3 Framed Ducts 229 20 Designing and Installing a Fitted Kitchen 230 20.1 Introduction 230 20.2 Ergonomic Design Considerations 230 20.3 Planning the Layout 231 xii Contents 20.4 Dismantling the Old Kitchen 232 20.5 Pre-fitting Preparation 233 20.6 Fitting and Fixing Base Units 234 20.7 Cutting, Jointing and Fitting Worktops 235 20.8 Fixing the Wall Units 237 20.9 Adding Finishing Items 238 21 Site Levelling and Setting Out 239 21.1 Introduction 239 21.2 Establishing a Datum Level 239 21.3 Setting Out the Shape and Position of the Building 240 Appendix: Glossary of Terms 245 Index 251 Preface This book was written because there is a need for Most carpenters cover both areas of this work, trade books with a strong practical bias, using a DIY although some specialize in either one or the step-by-step approach – and not because there was other.
Load more

Recommended publications
  • The Joinery Collection About Us Howdens Joinery Is the UK’S Largest Manufacturer and Supplier of Fitted Kitchens, Appliances and Joinery Products
    The Joinery Collection About Us Howdens Joinery is the UK’s largest manufacturer and supplier of fitted kitchens, appliances and joinery products. We are a trusted, trade-only business that has been selling to trade professionals since 1995. Last year we supplied over 400,000 kitchens, 2.5 million doors and 770,000 appliances to UK homes. Our products are available from stock in over 650 depots throughout the UK, and in each depot, trained designers are on hand to support you and your builder. We do not endorse trade professionals directly, but to find a builder near you, talk to your local Howdens Joinery depot or visit www.howdens.com/about-us/find-a-local-builder Our product range We have over 75 door styles to choose from including internal, sliding wardrobe, external, French and garage doors. We also offer quality joinery products, from hardware and stair parts, to skirting and timber or laminate flooring - plus the tools, fixings and accessories that you need to install them. There is an enormous choice of joinery products for all kinds of renovation, refurbishment and new build projects. To find out more about Howdens Joinery, contact your local builder or visit www.howdens.com Pricing and Aftersales To see our Pricing and Aftersales policy, please visit: www.howdens.com/about-us/howdens-pricing-and-aftersales-policy Copyright © 2018 Howden Joinery Ltd. All rights reserved. Contents A truly local business 02 Flooring 144 Howdens & the history of doors 03 Flooring accessories 165 Howdens door visualiser 04 The Burford joinery collection
    [Show full text]
  • A Guide to Lesser Known Tropical Timber Species July 2013 Annual Repo Rt 2012 1 Wwf/Gftn Guide to Lesser Known Tropical Timber Species
    A GUIDE TO LESSER KNOWN TROPICAL TIMBER SPECIES JULY 2013 ANNUAL REPO RT 2012 1 WWF/GFTN GUIDE TO LESSER KNOWN TROPICAL TIMBER SPECIES BACKGROUND: BACKGROUND: The heavy exploitation of a few commercially valuable timber species such as Harvesting and sourcing a wider portfolio of species, including LKTS would help Mahogany (Swietenia spp.), Afrormosia (Pericopsis elata), Ramin (Gonostylus relieve pressure on the traditionally harvested and heavily exploited species. spp.), Meranti (Shorea spp.) and Rosewood (Dalbergia spp.), due in major part The use of LKTS, in combination with both FSC certification, and access to high to the insatiable demand from consumer markets, has meant that many species value export markets, could help make sustainable forest management a more are now threatened with extinction. This has led to many of the tropical forests viable alternative in many of WWF’s priority places. being plundered for these highly prized species. Even in forests where there are good levels of forest management, there is a risk of a shift in species composition Markets are hard to change, as buyers from consumer countries often aren’t in natural forest stands. This over-exploitation can also dissuade many forest willing to switch from purchasing the traditional species which they know do managers from obtaining Forest Stewardship Council (FSC) certification for the job for the products that they are used in, and for which there is already their concessions, as many of these high value species are rarely available in a healthy market. To enable the market for LKTS, there is an urgent need to sufficient quantity to cover all of the associated costs of certification.
    [Show full text]
  • Manual of Purpose-Made Woodworking Joinery to Mary Elizabeth, Who Enriched My Life Many Years Ago by Adding Goring to Her Majestic Names
    Manual of Purpose-Made Woodworking Joinery To Mary Elizabeth, who enriched my life many years ago by adding Goring to her majestic names. Sadly, though, this transaction caused her to forfeit the magnificent maiden name of Wood. Books by the same author: First- Fixing Carpentry Manual Manual of First- and Second- Fixing Carpentry Manual of Purpose-Made Woodworking Joinery Les Goring, ACIOB, FIOC, FTCB, LCGI, MIWSc Fellow of the Institute of Carpenters Former Senior Lecturer in Wood Trades at Hastings College of Arts & Technology Drawings by the author First edition published 2014 by Routledge 2 Park Square, Milton Park, Abingdon, Oxon OX14 4RN and by Routledge 711 Third Avenue, New York, NY 10017 Routledge is an imprint of the Taylor & Francis Group, an informa business © 2014 Les Goring The right of Les Goring to be identified as author of this work has been asserted by him/her in accordance with sections 77 and 78 of the Copyright, Designs and Patents Act 1988. All rights reserved. No part of this book may be reprinted or reproduced or utilised in any form or by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying and recording, or in any information storage or retrieval system, without permission in writing from the publishers. Trademark notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identification and explanation without intent to infringe. British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library Library of Congress Cataloging in Publication Data Goring, L.
    [Show full text]
  • Tannins-Boron Networks for Long-Term and Low-Environmental Impact Wood Preservatives Jinbo Hu
    Tannins-boron networks for long-term and low-environmental impact wood preservatives Jinbo Hu To cite this version: Jinbo Hu. Tannins-boron networks for long-term and low-environmental impact wood preservatives. Materials. Université Montpellier, 2015. English. NNT : 2015MONTS248. tel-02127899 HAL Id: tel-02127899 https://tel.archives-ouvertes.fr/tel-02127899 Submitted on 13 May 2019 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. UNIVERSITÉ DE MONTPELLIER T H È S E Pour obtenir le grade de DOCTEUR DE L'UNIVERSITE DE MONTPELLIER Spécialité : Mécanique et Génie Civil Ecole Doctorale : Information, Structures, Systèmes Associations tanins-bore pour des produits de protection du bois à faible impact environnemental Par Jinbo HU Soutenance prévue le 01 Septembre 2015 JURY Bertrand CHARRIER (Université de Pau et des Pays l’Adour) Rapporteur Pierre-Jean MEAUSOONE (Université de Lorraine) Rapporteur Joseph GRIL (Université de Montpellier) Examinateur Yiqiang WU (Université du Centre-Sud de la science et de la technologie (Chine)) Examinateur Gianluca TONDI (Université de Salzbourg (Autriche)) Invité Marie-France THEVENON (CIRAD, Montpellier) Directrice de Thèse Acknowledgement First and foremost I would like to thank my PhD advisors, Dr.
    [Show full text]
  • Glossary of Timber Trade Terms Cumpiled by T
    Glossary of Timber Trade Terms Cumpiled by T. F O'Reilly uf Price & Pierce Ltd. ENGLISH SWEDISH GERMAN FRENCH FINNISH across the grain tvars over fibrerna quer zur sens perpendiculaire poikkisyin Faserrichtung au fiI, (sens transversal) afforestation skogsodling Aufforstung afforestation, metsiWiminen, boisement metsanviljely air drying lufttorkning Lufttrocknung sechage al'air ilmakuivatus alder al Erie aune leppa allowance for torkman Schwindmass surmesure pour kuivumisvara shrinkage in retrait au sechage seasoning allowance for stOtman,-fot, J ustierungsmass, surlongueur tasausvara trim(ming), extra justerman Messzuschlag, length tJbermass along the grain i fibrernas riktning in der sens du fiI, pitkin syita, langs fibrerna Faserrichtung (sens axial) syiden suuntaan annual ring, arsring Jahresring cerne d 'accroissement, vuosirengas, growth ring couche annuelle vuosilusto approximately, about cirka, omkring ungefahr, cirka environ, Ilthes, suunnilleen, approximativement noin arbitration arbitration, Arbitrage arbitrage valimiesmenettely skiljemannaforfarande arrival advice ankomstmeddelande Ankunftsmeldung avis d 'arrivee saapumisilmoitus as falling fallande wie es kommt tombant, qualite lankeavasti tombante ENGLISH SWEDISH GERMAN FRENCH FINNISH w 0"'" ash (common) ask Esche frt!ne (commun) saarni aspen asp Espe tremble haapa assistant bitrade, assistent Assistent aide, assistant apulainen average (subst.) medeltal Durchschnitt moyenne keskimaara, keskiarvo award skiljedom Arhitrage- rHaction valitystuomio Zuerkennung axe yxa Axt hache
    [Show full text]
  • Characteristics and Availability of Commercially Important Woods Regis B
    Chapter 1 Characteristics and Availability of Commercially Important Woods Regis B. Miller hroughout history, the unique characteristics and Contents T comparative abundance of wood have made it a natural material for homes and other structures, furniture, tools, vehicles, and decorative objects. Today, for Timber Resources and Uses 1–2 the same reasons, wood is prized for a multitude of uses. All wood is composed of cellulose, lignin, hemicelluloses, Hardwoods and Softwoods 1–2 and minor amounts (5% to 10%) of extraneous materials Commercial Sources of Wood Products 1–2 contained in a cellular structure. Variations in the characteris- tics and volume of these components and differences in cellu- Use Classes and Trends 1–3 lar structure make woods heavy or light, stiff or flexible, and hard or soft. The properties of a single species are relatively Species Descriptions 1–3 constant within limits; therefore, selection of wood by spe- cies alone may sometimes be adequate. However, to use U.S. Wood Species 1–3 wood to its best advantage and most effectively in engineer- ing applications, specific characteristics or physical properties Hardwoods 1–3 must be considered. Softwoods 1–10 Historically, some species filled many purposes, while other less available or less desirable species served only one or two Imported Woods 1–17 needs. For example, because white oak is tough, strong, and durable, it was highly prized for shipbuilding, bridges, Hardwoods 1–17 cooperage, barn timbers, farm implements, railroad crossties, fence posts, and flooring. Woods such as black walnut and Softwoods 1–33 cherry were used primarily for furniture and cabinets.
    [Show full text]
  • 4-H Woodworking Project – Activity Guide
    444---HHH WWWOOOOOODDDWWWOOORRRKKKIIINNNGGG PPPRRROOOJJJEEECCCTTT Activity4-H Motto Guide Revised 2009 Learn to do by doing 4-H Pledge I pledge: My HEAD to clearer thinking, My HEART to greater loyalty, My HANDS to larger service, My HEALTH to better living, For my club, my community and my country 4-H Grace (Tune of Auld Lang Syne) We thank thee Lord, for blessings great On this, our own fair land. Teach us to serve thee joyfully, With head, heart, health and hands. Unless otherwise noted, the content of this project has been adapted from the Alberta 4-H Woodworking Leader’s Reference Manual, 2004. ii 4-H Woodworking Project – Activity Guide CONTENTS 1: INTRODUCTION ..............................................................................................................1 How To Use the 4-H Woodworking Project Activity Guide ...............................................1 Experiential Learning .................................................................................................2 2: SAFETY............................................................................................................................4 Hazard Hunt Junior, Intermediate, Advanced............................................................4 Hazard Hunt Checklist .......................................................................................................6 Our Shop Safety Rules Junior, Intermediate, Advanced.............................................7 Our Club’s Safety Guidelines.............................................................................................8
    [Show full text]
  • Aus: Zeitschrift Für Papyrologie Und Epigraphik 113 (1996) 197–204
    STEVE VINSON PAKTOUN AND PAKTVSIS AS SHIP-CONSTRUCTION TERMINOLOGY IN HERODOTUS, POLLUX AND DOCUMENTARY PAPYRI aus: Zeitschrift für Papyrologie und Epigraphik 113 (1996) 197–204 © Dr. Rudolf Habelt GmbH, Bonn 197 PAKTOUN AND PAKTVSIS AS SHIP-CONSTRUCTION TERMINOLOGY IN HERODOTUS, POLLUX AND DOCUMENTARY PAPYRI* The most important description of Egyptian ship construction from the Graeco-Roman period is that of Herodotus, in Book 2, 96. The passage is mostly straightforward, and remarkably consistent with what is known about actual Egyptian hull construction. One sentence, however, has remained problematic: ¶svyen d¢ tåw èrmon¤aw §n Œn §pãktvsan tª bÊblƒ. The standard modern interpretation may be found in LLOYD,1 who translates “they caulk the seams from within with papyrus.” However, an alternative view — which is accepted here — has more recently been championed: that §n Œn §pãk- tvsan tª bÊblƒhere means “they make fast from the inside with papyrus,” in the sense of lashing together vessel planks with papyrus webbing or ropes.2 HALDANE and SHELMERDINE showed that caulking is archaeologically unattested in surviving examples of Egyptian hull construction; that the archaeological attestation of hull lashing extends at least into the Middle Kingdom; and provided a useful discussion of the meaning of paktoËn (the compound §mpaktoËn is found only in Herodotus) in literary texts in non-nautical contexts.3 With this note, the author would like to extend their argument by focussing on the following issues: (1) whether it is possible to detect a difference in meaning between §mpaktoËn and the simple form paktoËn, especially in light of P. Col. III, 43; (2) the appearance of paktoËn and its nominal form pãktvsiw as terms for hull construction in the Onomasticon of Pollux of Naucratis (1, 84); (3) the meaning and usage of the noun èrmon¤a, which is intimately connected to the meaning of the verb §mpaktoËn; and (4) on the use of paktoËn and pãktvsiw as terms for vessel maintenance procedures in documentary papyri (P.
    [Show full text]
  • Timber Framing
    TIMBER FRAMING ABUTMENT. In joinery, the end of one timber touching anoth- BORING MACHINE. A hand-cranked device with gears that er. See also BUTT JOINT. drive an auger bit, used to bore large holes, as in roughing out a ADZE. A handled edge tool (various patterns) with its edge at a mortise. right angle to the handle, used to shape or dress timbers. BOW. Deviation from straight in the length of a timber. Also AISLE. Lengthwise space (parallel to the roof ridge) in a building SWEEP. See also CROOK and CROWN . divided into several such spaces, usually three. Cf. BAY. BOXED HEART TIMBER. Timber whose section includes the ANCHOR BEAM. Major tie beam joined to H-bent posts, gen- heart of the tree. Since checks will not cross the heart, such a tim- erally with shouldered, outside-wedged through-tenons. ber can never split completely. Cf. FOHC. ARCH BRACE. 1. Curved brace. 2. Brace rising from bridge abut- BOX FRAME. Construction in which roof trusses are carried by a ment to support lower chord of truss. self-supporting structure of posts, tie beams and wall plates. Cf. ARRIS. The edge along which two adjacent surfaces meet. CRUCK FRAME. ASHLAR PIECE. Short vertical strut near the foot of a rafter, join- BRACE. Any diagonal timber (permanent or temporary) that ing it to a sole piece at the top of a masonry wall. resists distortion of a frame. See also KNEE BRACE. AUGER. A handled edge tool for boring holes in wood. BRACKET. Block tenoned or pegged to one timber to support BACKING.
    [Show full text]
  • Characteristics and Availability of Commercially Important Woods Michael C
    CHAPTER 2 Characteristics and Availability of Commercially Important Woods Michael C. Wiemann, Research Botanist Throughout history, the unique characteristics and abun- dance of wood have made it a natural material for homes Contents and other structures, furniture, tools, vehicles, and decora- Timber Resources and Uses 2–2 tive objects. Today, for the same reasons, wood is prized for Hardwoods and Softwoods 2–2 a multitude of uses. Commercial Sources of Wood Products 2–2 All wood is composed of cellulose, lignin, hemicelluloses, Use Classes and Trends 2–2 and minor amounts (usually less than 10%) of extraneous Species Descriptions 2–3 materials contained in a cellular structure. Variations in the characteristics and proportions of these components and U.S. Hardwoods 2–3 differences in cellular structure make woods heavy or light, U.S. Softwoods 2–11 stiff or flexible, and hard or soft. The properties of a single Imported Woods 2–18 species are relatively constant within limits; therefore, selec- tion of wood by species alone may sometimes be adequate. Imported Hardwoods 2–19 However, to use wood to its best advantage and most effec- Imported Softwoods 2–38 tively in engineering applications, specific characteristics or Scientific Name Index 2–41 physical properties must be considered. U.S. Wood Species—Hardwoods 2–41 Historically, some species filled many purposes, whereas other less available or less desirable species served only U.S. Wood Species—Softwoods 2–42 one or two needs. For example, because white oak is tough, Imported Woods—Hardwoods 2–43 strong, and durable, it was highly prized for shipbuilding, Imported Woods—Softwoods 2–44 bridges, cooperage, barn timbers, farm implements, railroad crossties, fence posts, and flooring.
    [Show full text]
  • Longboat Island Chapel Non-Profit Org
    Longboat Island Chapel Non-profit Org. U.S. POSTAGE PAID MANASOTA FL PERMIT NO. 1035 6200 Gulf of Mexico Drive December—February Longboat Key, FL 34228 Winter 2018 [email protected] Chapeletter www.longboatislandchapel.org Current Resident or Office Phone: Did you know about our membership opportunities? 941-383-6491 Reverend Bill Friederich: 207-669-5353 Your membership in the Longboat Island Chapel will give you many happy hours of worship, fellowship, fun and service! MiMi Horwitz: 941-527-7733 Membership opportunities include Full-time and Associate (seasonal). Both memberships provide the ability to vote on Lord’s Warehouse Thrift Shop: Chapel decisions. As an Associate Member, for those who live here seasonally, you can be a member at 941-383-4738 another church, except for the counties of Manatee and Sarasota. SUNDAY SCHEDULE We welcome your membership and encourage your special gifts and experiences to guide us into the future. 9:40 a.m. Healing and Communion (2nd, 3rd, 4th and 5th Sundays) 10:00 a.m. Worship Service LBIC Senior Class Members (1st Sunday Communion) On Sunday, November 4th, Rev. Shook delivered a moving homily in which he described the need for Christians to be kind, thoughtful and to not neglect to show hospitality to strangers, for thereby some of us have entertained angels unawares. Following the service many Chapel members attended a tailgate luncheon to welcome back our snowbirds. In the festively decorated fellowship hall Chapel members enjoyed good food, spirited conversation and a special tribute to the “Senior Class” – those members who have achieved the 90 + year milestone.
    [Show full text]
  • Wood and Tree Fungi Biology, Damage, Protection, and Use
    Olaf Schmidt Woodand Tree Fungi Biology, Damage, Protection, and Use Olaf Schmidt Wood and Tree Fungi Biology, Damage, Protection, and Use With 74 Figures, 12 in Colors, and 49 Tables 123 Professor Dr. Olaf Schmidt Universität Hamburg Zentrum Holzwirtschaft Abteilung Holzbiologie Leuschnerstraße 91 21031 Hamburg Germany [email protected] Cover: Fruit body of serpula lacrymans and electrophoresis gel demontstrating species-specific priming PCR. Library of Congress Control Number: 2006920787 ISBN-10 3-540-32138-1 Springer Berlin Heidelberg New York ISBN-13 978-3-540-32138-5 Springer Berlin Heidelberg New York This work is subjecttocopyright. All rights reserved, whetherthe whole orpartof the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable for prosecution under the German Copyright Law. Springer is a part of Springer Science + Business Media springer.com © Springer-Verlag Berlin Heidelberg 2006 Printed in Germany The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Editor: Dr. Dieter Czeschlik, Heidelberg, Germany Desk editor: Dr. Andrea Schlitzberger, Heidelberg, Germany Cover design: design & production, Heidelberg, Germany Typesetting and production: LE-TEXJelonek,Schmidt& Vöckler GbR, Leipzig, Germany 31/3100/YL – 543210–Printedonacid-freepaper Foreword Wood, as a raw material and a renewable biomass, has had great importance for thousands of years.
    [Show full text]