Lab-Line Instruments

Set-up Frame Set

Lab-Chron Timer

Lab-Line presents a wide variety of high quality general laboratory apparatus to compliment our line of constant temperature products. Choose corrosion-resistant alloy clamps, support frames, and precision lab jacks to support your glassware and apparatus. Check out our accurate timers, Thermo-Flasks the safety tongs and Saf-T-Shield, plus the Saybolt viscosimeters and products for petroleum testing. And

General Apparatus— Clamps ...... Petroleum Products ...... 49–52 55–56 Frames ...... 53Timers ...... Laboratory Jacks ...... 5457–58 Alumaloy ® Clamps

♦ Special die-cast aluminum alloy—more corrosion- ♦ Stainless steel spring for uniform tension resistant than zinc or steel ♦ Nickel-plated brass pivot pins ensure positive ♦ 47,000 psi tensile strength and 1100°F melting movement without wobbling point Economical and reliable, Alumaloy clamps have been field-tested by thousands of satisfied users.

Tri-Grip “45” Combination Utility and Burette Model 7014 ♦ Three-pronged jaws ORDERING INFORMATION

♦ Three vinyl and three Support Rod Total woven fiberglass high Ext. Rod Dia. Jaw Cap. Adjustable Length temperature sleeves Model Description Inches(cm) Inches(cm) Inches(cm) Inch.(cm) 3 1 included 7010 Small /8 (.9) 1 /2 (3.8) 3 1 3 /4 x 5 /2 7 (17.8) ♦ 360°-rotating 45° angle 7014 Large 7/16 (1.1) 31/2 (8.9) (9.5 x14) ribbed thumbscrew clamp 1 2 x 5 /2 1 holder 1 4 /4 (.6) 7022 Micro / (.6) 1 (2.54) (5 x 14) APPARATUS GENERAL

Model 7004 Tri-Grip “45”

Extension Clamps ORDERING INFORMATION

♦ Three-pronged jaws Ext. Rod Dia. Jaw Capacity Total Length ♦ Three vinyl and three Model Description Inches (cm) Inches (cm) Inches (cm) woven fiberglass high 7000 Small 3/8 (.9) 11/2 (3.8) 9 (22.9) temperature sleeves 7004 Large 7/16 (1.1) 31/2 (8.9) 11 (27.9)

included 7018 Micro 1/4 (.6) 1 (2.54) 61/2 (16.5) ♦ Sizes to fit every application

Varigrip Clamps

♦ Perfect for ORDERING INFORMATION cylindrical glassware and similar O.D.Accommodation Extension Shaft Dia. Total Length Model Inches (cm) L" x D" (cm) Inches (cm) apparatus 21⁄2 Ð 31⁄2 7048-1 ♦ Adjustable spring (6.4 Ð 8.9) collar 33⁄4 Ð 41⁄2 7048-2 ♦ Stainless steel handle (9.5 Ð 11.4) 71⁄4 x 7⁄16 12 and clamp 43⁄4 Ð 51⁄2 (18.4 x 1.1) (30.5) 7048-3 ♦ Available in four sizes (12 Ð 14) 51⁄2 Ð 61⁄2 ♦ Thumbscrews 7048-4 Model 7048Ð1,2,3,4 included (14 Ð 16.5)

Lab-Line Instruments • International FAX (708) 450-5830 • E-mail: [email protected] • World Wide Web: http://www.labline.com 49 GENERAL APPARATUS ♦ ♦ ♦ Frame Clamps ♦ ♦ ♦ ♦ ♦ Extension ClampCouplings ORDERING INFORMATION ORDERING INFORMATION oe nhs(m Inches (cm) Inches (cm) Model 7050-6 7050-1 oe nhs(m Inches (cm) Inches (cm) Model 7066 7053 Model 7053 student use Model 7050-6 Model 7050-1 down theexistingstandardframe horizontal orverticalrodwithouthavingtotear Used forapparatussupportframeset-up:adda with v-shapedcenteringgroovetoguarantee Model 7066 Model 7053 Ribbed thumbscrewsincluded Allows rodsofdifferentdiametertobeintermixed fastened tosupportrods Used tojoinsupportrodlengthsorextendclamps Model 7050-1 o aaiyDa Total Length Rod CapacityDia. Total Length Rod CapacityDia. provides side-to-sidelinearcoupling, provides end-to-endbuttcoupling 1 1 ⁄ ⁄ 2 2 (1.3) 13 1 (1.3) has ribbedthumbscrews—perfectfor uses Allenscrews(included) 1 1 3 (7.6) 3 Model 7050-6 / ⁄ 4 2 (4.4) (3.8) Model 7066 ♦ ♦ Model 7068— ♦ ♦ ♦ ♦ ♦ ♦ Model 7040— Clamp Holders ♦ Pinchcock Clamps ORDERING INFORMATION ORDERING INFORMATION oe nhs(m Inches (cm) Inches (cm) Model oe ecito nhs(m Inches (cm) Inches (cm) Description Model Clamp sectionsareatrightanglestoeachother mounted onthesameside “One-hand” ClampHolder—boththumbscrewsare Two 45°angleribbedthumbscrewsincluded Horizontal orverticalright-angleclampsetup Sturdy Lexanplasticconstruction Stainless steelspringmaintainstension 7040 7068 7073 7072 Model 7072 up to Used tocontrolliquidflowthroughflexibletubing up to Double “45”ClampHolderforrodsorpipes 7 1 ⁄ ⁄ 8 4 Heavy Duty " diameter " diameter Regular o aaiyDa Total Length Rod CapacityDia. Model 7040 up to —for flexibletubing 1 ⁄ 2 13 2(5.1) (1.3) 7 ⁄ 8 22 5 (2.2) uigCpct i.Total Height Tubing CapacityDia. 1 ⁄ 4 .)2(5.1) (.6) Model 7072 1 ⁄ 2 (14) Model 7077 Model 7054

Duo-Clamp Thermometer Clamp

♦ Add attachments to support framework without ♦ Support thermometers, glass tubes, or similar disturbing previous set-up apparatus 1 ♦ Joins two rods in a “T” connection at any angle of up to ⁄ 2" diameter within a 360° arc ♦ Stainless steel clamping jaws have 1⁄ 2" adjustable ♦ Alumaloy construction extension and rotate 360° ♦ Allen set screws and bead wrench included

♦ 1 1⁄ 8" overall diameter APPARATUS GENERAL

Model 7064

Model 7080 All-Angle Swivel Clamp Suspension Clamp ♦ Connect rods, extension clamps, frames, or other ♦ Suspend thermometers, drying tubes, or similar apparatus up to 1⁄ 2" diameter at any angle apparatus in water baths, over dry baths, or over ♦ Two 45° angle ribbed thumbscrews rotate heating surfaces on a connecting rod ♦ Ribbed thumbscrew clamp holds objects of 1⁄ 2"

Grip-Safe Tubing Manipulator Model 7076 ♦ Manipulates or breaks glass tubing safely, without risk of injury to hands ♦ Molded Neoprene Giant Hosecock Clamp construction ♦ Accommodates most ♦ Controls fluid flow through thick- or thin-walled commonly-used sizes of flexible tubing up to 1" o.d. tubing, including “T” and ♦ Nickel-plated brass threaded screw with plastic knob “L” shapes ♦ Countersunk screw mounting holes in base ♦ Total length is 5", with 3" Model 1480 wide flange

Lab-Line Instruments • International FAX (708) 450-5830 • E-mail: [email protected] • World Wide Web: http://www.labline.com 51 GENERAL ♦ APPARATUS♦ Overall dimensions9 2 jaws donotrotate weighs only6 oz cm), ♦ ♦ ♦ ♦ “ERM” ♦ ♦ ♦ ♦ Water BathClamps ORDERING INFORMATION oe nhs(m nhs(m Inches (cm) Inches (cm) Inches (cm) Model 7078 7079 Sturdy, corrosion-resistant Lexglas Holder willnotobscuregraduation linesandnumbers Built-in meniscusreader micro sizeto100ml Quickly andsecurelysupportstwoburettes—from Model 7079 capacity Model 7078 covered jaws Alumaloy constructionwiththree-prong,vinyl- over waterbaths Support thermometersandothersimilarapparatus 1 Model 7078 ⁄ 2 " fromapparatuscentertoofsupport a aaiyRdCpct Total Length RodCapacity Jaw Capacity Double BuretteHolder 1 (2.54) 1 ⁄ 2 (1.3) —Small clampwith —Large clampwithrotatingjaws,1"jaw 1 ⁄ 2 "W 1 ⁄ 2 Model 7086 × 13 3 (1.3) 5"H (24.1 1 ⁄ 2 " jawcapacity, ® construction 1 × ⁄ 2 (8.9) 12.7 ♦ ♦ ♦ ♦ ♦ Total length11 (18.4 ♦ ♦ Double SupportBaseandRod ♦ ♦ Frame Foot ♦ ♦ Chain Clamp ♦ ♦ 6 Overall diameter2" Allen setscrewsincluded in foot 3 countersunkscrewholes (Model 7057) (Model 7086)withtheDoubleSupportBaseandRod Model 7058 Stainless steelshaftis7 Accepts set-ups Designed tosupportframe diameter of2 beakers withoutside Accommodates the collar adjustable portionof a hookonthe 13" chainlocksover 23"H Solid aluminumrodisthreadedatoneend,measures prevent labbenchspills Base featuresadriptrougharoundtherimto (33 White glazedporcelainbasemeasures13" 1 ⁄ × 2 " 1.6 cm) × × 17.8 cm) 1 1 ⁄ ⁄ 2 2 " diameter(58.4 " diameterrods includes theDoubleBuretteHolder 1 ⁄ 1 2 ⁄ " to 2 " (29.2cm) 1 ⁄ Model 7049 4 "L Model 7057 × × 7 1.3) ⁄ 16 " diameter Model 7051 × 17" Set-Up Frame Sets

• Easy construction in almost any rectangular shape and size • 4 sizes of frame set- ups • 11 sizes of frame rods • 24 month warranty

Model 7092 APPARATUS GENERAL

These rigid frame supports are especially useful for glassware and apparatus assemblies in chemistry labs. They allow the addition or removal of supports and apparatus without needing to dismantle the entire set-up. ♦ Frame sets come with all components necessary for a complete frame assembly

♦ Extruded solid aluminum 1⁄ 2" diameter rods ♦ Wide assortment of rod lengths available, suitable for many laboratory applications ♦ Create three-dimensional set-ups with the 3-D Squaroid ® Frame

CONTENTS OF ALUMALOY¨ SET-UP FRAME SETS SET-UP FRAME SETS Description No. 7090 No. 7092 No. 7094 No. 7096 Dimensions Rod, 15⁄8" (4.1 cm) (No. 7100-1) 4 4 4 6 Model H" x W" (cm) Rod, 12" (30.5 cm) (No. 7100-2) — — — 6 7090 24 x 24 (61 x 61) Rod, 18" (45.7 cm) (No. 7100-3) 2 2 3 — 7092* 24 x 48 (61 x 122) Rod, 24" (61 cm) (No. 7100-4) 8 5 — 2 7094 48 x 48 (122 x 122) Rod, 36" (91.4 cm) (No. 7100-5) — 2 2 — 7096* 48 x 72 (122 x 182.9) Rod, 48" (122 cm) (No. 7100-6) — 4 10 7 *can be inverted Rod, 72" (182.9 cm) (No. 7100-7) — — — 5 Frame Clamp (No. 7050-1) 22 22 42 49 Frame Foot (No. 7051) — — — 8

ALUMALOY¨ RODS

Cat. No. 7100-1 7100-2 7100-3 7100-4 7100-5 7100-6 7100-7 7100-8 7100-9 7100-10 7100-11

Length 15⁄8" 12" 18" 24" 36" 48" 72" 96" 2" 6" 144" (cm) (4.1) (30.5) (45.7) (61) (91.4) (122) (182.9) (243.8) (5.1) (15.2) (365.8)

Lab-Line Instruments • International FAX (708) 450-5830 • E-mail: [email protected] • World Wide Web: http://www.labline.com 53 GENERAL APPARATUS ♦ ♦ ♦ experimental set-ups. instrumentation atspecificheightsasrequiredtoaccommodate support varioustypesandsizesofglassware,apparatus, Ideal foranylaboratorysetting,Lab-LineMulti-Jacks Multi-Jacks 24monthwarranty • Sturdy,corrosion-resistantanodized • Availablein4sizes • Providessmooth,easyraisingand lowering • *Rated 50/60 Hz 50/60 *Rated MOTORIZED MODEL Platforms 7.9") x (7.9" two *Includes ORDERING INFORMATION oe ot*Tp c)(m b.(g k)(kg) (kg) (kg) lbs. (cm) (cm) Type Volts* Model aluminum construction water bathsorglassware apparatus, suchasheaters,hotplates, of manydifferenttypesinstrumentsor platform Stepless screw-typecontrolraisesorlowersloading Stable inallpositions Accurate, verticalslippage-freeadjustment 29 oe c)Ice c)ls k)(g k)(e/)(cm) (Set/2) (kg) (kg) (kg) lbs. Inches (cm) (cm) Model 26 25 24 23 . . . o1. 7 .04.00 3.10 176 3.1to10.9 7.9x * 110 ® ieo lt dutbeMxLa tNtW.Si t Dimensions Ship Wt. Net Wt. MaxLoadat Adjustable ofPlate Size 2. 00 80t 78 8)(.1 (1.82) (1.41) (80) (8.0to27.8) (20.0 x20.0) 1. 50 80t 78 8)(.0 11)(30.0x30.0) (1.18) (1.00) (80) (8.0to27.8) (12.2 x15.0) 1. 40 60t 43 5)(.0 (0.85) (0.70) (50) (6.0 to24.3) (12.0 x14.0) 75x80 49t 47 3)(.6 03)—— — (0.39) (0.26) (30) (4.9to14.7) (7.5 x8.0) . . . o1. 7 .02.60 2.20 176 3.1to10.8 4.8 x5.9 . . . o586 .708 — — 1.86 1.54 0.87 0.57 110 66 2.4to9.6 1.9to5.8 4.7 x5.5 2.9 x3.1 nhsFo-oMdl b.ls oe Inches Model lbs. lbs. Middle From-To Inches aibe71x8537x1. 9 0110.7 10.1 198 3.7x15.7 7.1x8.5 Variable pe 1. 16 95x3.)(0 46 (4.9) (4.6) (90) (9.5x39.8) (18.0x21.6) Speed oo nhsFo-oIce idels lbs. lbs. From-To Middle Inches Motor Inches ieo lt dutbeMx oda NtW.Ship Wt. Net Wt. Load at Max. Adjustable ofPlate Size oe ecito Inches (cm) Description Model ACCESSORIES 25-5 25-2 25-7 25-6 ce o ltom — Screw for Platforms Retort StandPlate Retort Support Rod Support Rubber Mat Model 25 OPTIONAL PLATFORMS 25-4 25-3 25-1 25-3 25-1 25-4 25-3 25-1 25.4 Dimensions (18.0 x26.0) (30.0 x30.0) (20.0 x20.0) (18.0 x26.0) (20.0 x20.0) (18.0 x26.0) (30.0 x30.0) (20.0 x20.0) (20 x20) (20 x20) 7.9 x 7.9 x 11.8 x 11.8 x 11.8 x 25.6 L (65.0) 7.1 x9.8 7.9 x 7.1 x9.8 7.9 x 7.1 x9.3 7.9 x • Temperature control from 60°F to 220°F or 125°F to 450°F as specified by A.S.T.M. D-88 • Three heaters for full temperature — 75 watts continuous, 75 watts controlled by main switch, 660 watts for quick heat • Durable stainless steel bath is welded securely to stainless steel draft shield and base Saybolt Viscosimeter The Lab-Line Constant Temperature Saybolt Viscosimeter is designed to measure the Saybolt viscosity of petroleum products in conformity with A.S.T.M. specifications.

♦ Bath temperature controlled by mercury-type thermoregulator

♦ Electronic relay circuit prevents thermoregulator Model 4510 from carrying the heater load APPARATUS ♦ Externally mounted induction motor drives stainless GENERAL steel propeller stirrer for thorough circulation of oil without excessive agitation ♦ Copper cooling coil can be used ORDERING INFORMATION when operating conditions approach ambient to achieve below-ambient Overall Dimensions Net Wt. Ship Wt. conditions Temperature Tube W" x D" x H" lbs. lbs. ♦ Each unit comes with a Saybolt Model Volts* Range Capacity (cm) (kg) (kg) viscosity tube cleaner, bulb pipette 4510 2 60¡Ð220¡F to adjust sample level, corks with (15.6¡Ð104¡C) 4512 120 14 x 16 x 18 35 100 pull chains, and oil strainer (35.6 x 40.6 x 45.7) (15.9) (45.4) 4 4514A 125¡Ð450¡F ♦ Models 4510 and 4512 provided (51.6¡Ð232¡C) with 3 gallons of Saybolt Oil; Model *Rated 60 Hz 4514A requires a high

ACCESSORIES Model Description 4511 Saybolt Oil—Low temperature, gallon 4515 Saybolt Oil—High temperature, gallon 4520 Saybolt Viscosity Tube; brass with stainless steel universal orifice, meets A.S.T.M. requirements 4521 Saybolt Viscosity Tube; brass with stainless steel furol orifice 4522 Saybolt Viscosity Tube; brass with stainless steel universal and furol orifices 4523 Saybolt Viscosity Tube; brass without orifice 4524 Saybolt Viscosity Tube; stainless steel with stainless steel universal orifice 4525 Saybolt Viscosity Tube; stainless steel with stainless steel furol orifice 4526 Saybolt Viscosity Tube; stainless steel with stainless steel universal and furol orifices 4527 Saybolt Viscosity Tube; stainless steel without orifice 4528 Stainless Steel Universal Orifice 4529 Stainless Steel Furol Orifice 4530 Road Oil Orifice 4531 Orifice Wrench 4532 Tube Wrench 4533 Saybolt Viscosity Tube; brass with stainless steel universal and furol orifice and orifice wrench 4534 Saybolt Viscosity Tube; stainless steel with stainless steel universal and furol orifice and orifice wrench

Lab-Line Instruments • International FAX (708) 450-5830 • E-mail: [email protected] • World Wide Web: http://www.labline.com 55 GENERAL ♦ ♦ ♦ ♦ ♦ ♦ APPARATUS controlled penetrationtests Available 5-secondtimerfor containers groove forcenteringcansor show ifbaseislevel,circular leveling screws,circularvialto Aluminum basehasadjustable or weighing interchange, easycleaning, from dialheadassemblyforrapid Plunger iscompletelyseparate freely ontwolargebearings Nickel-plated brassplungerslides bearings— totalpenetration60mm Aluminum penetrometerheadrideson4bronze setting Locking adjustmentondialforinstantaneouszero divisions, protectedbyaconvexglasslenscover ♦ standard cone. consistency oflubricatinggreasesbypenetrationa 4101 lack ofrigidity,andclumsinessoperation.The eliminates multipleknobs,loosebearingsandguides, A.S.T.M. penetrationtestsD-217.Itssimplifieddesign The Lab-LineHi-AccuracyPenetrometerperforms Penetrometer 4101-6 4101-5 4101 ORDERING INFORMATION oe ot zL c)(m k)(kg) (kg) (cm) "(cm) H x " W x L" Hz Volts Model 5" diameterdialisgraduatedin300 gives superiorperformanceinmeasuringthe 4 50 60 240 120 —— 24monthwarranty • Fieldtestedforeaseofuseand • Toolmaker’sdial-type • Singleknobcontrol • consistent performance indicator 1 2. 65x76 4. 79x2.)(.)(11.3) (5.9) (45.7 x27.925.4) 7.6) x 16.5 x (24.1 ACCESSORIES ⁄ 4103 4102S 4102 4119 4107 4106 4104A 4104 oe Description Model 9 iesosW "xH b.lbs. lbs. W"xD"H" Dimensions 10 1 ⁄ 2 mm aeOealDmnin e t Ship Wt. Net Wt. OverallDimensions Base x 6 1 ⁄ 2 eermtrNel o ....D5 2.5gram wt.; Penetrometer D-5; Needlefor A.S.T.M. Stainless SteelConewithstainlesssteeltipandstem;102.5grams wt. 102.5grams wt. Brass Conewithstainlesssteeldipandstem; alternative methodcovering fullrange ofgreases;102.5 gram wt. D-217 Magnesium Conewithstainlesssteeltipandstemfor A.S.T.M. 35gram wt. Aluminum Cone; 15gram wt. Aluminum Plungerreplacesstandardbrass plunger; 2.5gram wt. Penetrometer D-1321was penetration; Needlefor A.S.T.M. Same as#4103except withBureauofStandardCertificate 0x1 81 25 13 10x1128 x 3 Model Model 4101 1 ⁄ 8 " shank Model 1405

• Push-button reset for ease of use • Angled display for ease of APPARATUS

viewing GENERAL • Large illuminated start-stop switch facilitates sequential • Precision motor provides timing accurate timing • Available solid state electronic • 24 month warranty model with LED display

Kwik-Set® Lab-Chron® Timers

Lab-Line’s “Kwik-Set” Lab-Chron Timers have a ♦ High torque synchronous motor for instant starts multitude of uses in physics, chemistry, petroleum, and biology ♦ Timing is accurate—independent of voltage laboratories. They are ideal for timing growth fluctuations processes, or electrical line load rates of chemical reactions, flow of liquids and gases, ♦ Electric brake for instantaneous stops without and histological preparations. They can also be used in overshoot viscosity testing, plus a wide range of other industrial ♦ Visual and audible alarm signals indicate completion applications. of timing cycle ♦ Five digit sealed counter with large, easy-to-read ♦ Compact, lightweight, and portable numbers ♦ Non-skid rubber feet

ORDERING INFORMATION Time Overall Dimensions Net Wt. Ship Wt. Range W" x D" x H" lbs. lbs. Model Volts Hz (increments) (cm) (kg) (kg) 1405 120 60 0.1 to 9999.9 Seconds 1406 240 50 (0.1 sec) 73⁄8 x 4 x 43⁄8 35 (18.7 x 10.2 x 11.1) (1.4) (2.3) 1407 120 60 0.01 to 999.99 Minutes 1408 240 50 (.01 min)

Lab-Line Instruments • International FAX (708) 450-5830 • E-mail: [email protected] • World Wide Web: http://www.labline.com 57 • Easy-to-set mechanical dial timer • Three timing options—1 hour, 12 hour, or 72 hour • High-contrast dial is easy to read • Use to turn equipment on and off at specific times Model 1410 • 24 month warranty

“Lab Minders” Timers The “Lab Minders” series of timers are perfect for timing air or water baths, incubators, ovens, furnaces,

GENERAL stirrers, mixers, or shakers. They are specially

APPARATUS designed for applications requiring equipment to be turned on and off at specific times—ideal for early morning starts and shut downs after closing hours. ♦ Model 1414—12 hour timing cycle in 15 minute ♦ Mechanical timer is independent of primary power increments supply ♦ Model 1430—72 hour timing cycle in 1 hour ♦ Two front-mounted 3-prong outlets control timed increments “on” and “off” of external equipment ♦ Visual and audible alarm signals indicate completion ♦ Dual alarm system—choose flashing light, buzzer, or of timing cycle both ♦ Grounded electrical receptacles ♦ Model 1410—1 hour timing cycle in 1 minute increments ♦ Outlets are rated for 15 amps at 120 volts

ORDERING INFORMATION Time Overall Dimensions Net Wt. Ship Wt. Range W" x D" x H" lbs. lbs. Model Volts Hz (increments) (cm) (kg) (kg)

1410 120 60 1 hour 1410-1 240 50 (1 minute)

1414 120 60 12 hours 7 x 6 x 4 4 6 1414-1 240 50 (15 minutes) (17.8 x 15.2 x 10.2) (1.8) (2.7)

1430 120 60 72 hours 1430-1 240 50 (1 hour)

58 Lab-Line Instruments • 15th & Bloomingdale Avenues, Melrose Park, IL USA 60160-1491 • 1-800-LAB-LINE • FAX (708) 450-0943 Polypro Water Samplers • Three sizes— filling capacity of 60 ml, 1400 ml, or 2000 ml • Polypropylene construction allows accurate sampling for trace metals • Autoclavable Model 4196 • 24 month warranty

Polypro Water Samplers The Lab-Line Polypro Water Samplers are designed for water sampling and B.O.D. testing applications. ♦ Polypropylene inlet and outlet opening plugs connected with adjustable nylon cord ♦ All metal parts are plated or stainless steel ORDERING INFORMATION ♦ Built-in weighted base Overall Size Net Wt. Ship Wt. provides stability when Capacity H" x D" lbs. lbs. unit is submerged Model (ml) (cm) Construction (kg) (kg) 7 x 17/8 .87 1.5 ♦ Bayonet fitting and foam 4196 60 (17.8 x 4.8) (0.4) (0.7)

ring hold top on securely 14 x 41/2 7.5 9.5 APPARATUS 4197 1,400 ♦ Reliable gravity- (35.6 x 11.9)Polypropylene (3.4) (4.3) GENERAL activated “spring catch” 18 x 41/2 8.25 11.5 opening system 4198 2,000 (45.7 x 11.9) (3.7) (5.2)

Model 4199

Sewage Sampler • Virtually indestructible • Cover and body precisely machined to provide air-tight, water-tight closure • Ratio of volume between sampler and bottle complies with three-fold displacement requirement • 24 month warranty

The Sewage Sampler is designed for manual sampling for B.O.D., sludge, turbidity, and dissolved oxygen determinations in accordance with A.P.H.A. Method Requirements and a variety of EPA applications. It is described in the Illinois State Water Survey Bulletin 16, and its use is indicated in the Standard Method of Water Analysis.

ORDERING INFORMATION ♦ Nickel-plated bronze and brass construction is Overall Dimensions Net Wt. Ship Wt. resistant to corrosive agents L x Dia." lbs. lbs. ♦ Cover is connected to the body by a 10" brass Model (cm) (kg) (kg) chain 17 x 4 9 15 4199 ♦ Sample bottle (up to 300 ml) is automatically (43.2 x 10.2) (4.1) (6.8) positioned by built-in platform and filling tube GENERAL APPARATUS ♦ ♦ ACCESSORIES oe Description Model 7009 7008 manipulation Available interchangeablejaws—improve up to240°C temperatures Four siliconegripsaresupplied—tolerate ♦ ♦ ♦ ♦ Safety Tongs Aluminum alloyjawsopentomaxof5 glassware safelyandsecurely Grips aredesignedtohandleheavyaswelldelicate pressure activatesarms,toprotectdelicateglassware Maximum sensitivityspringhandle—slightest and securely Manipulate alltypesoflaboratoryglasswaresafely Replacement Silicon Rubber Grips 4/pkg. Replacement Silicon Rubber Grips Interchangeable jaws, aluminum alloy Model 80 1 ⁄ 8 " ORDERING INFORMATION ♦ Saf-T-Shield ♦ ♦ ♦ oe c)(m k)(kg) (kg) (cm) (cm) Model ORDERING INFORMATION 7007 oe ul xedd(g (kg) (kg) Fully Extended Model bench topmounting Weighted baseincludesscrewholesforpermanent risk ofareactiongettingouthand anywhere there’sa flasks, distillation,orrefluxapparatus—use Can fullyenclosemostlabset-upssuchasboiling Shield is36"high,adjustsfrom14"to32"wide chemical spill force ofanexplosion,sheetflame,flyingglass,or Protects labworkersorstudentsfromtheinitial 80 aiu it oa eghNtW ShipWt. NetWt TotalLength Maximum Width 9. 13c)(36 (16.8) (13.6) (91.4 x81.3cm) nhsIce b.lbs. lbs. Inches Inches 1.)(00 3.)(0.44) (35.0) (30.0) (15.3) Model 7007 iesosls lbs. lbs. Dimensions 6Hx3" 037 30 36"H x32"W 1807 1 0.74 11.8 6 e t ShipWt. Net Wt. • For industrial, clinical, or educational applications • 26 models available, with capacities from 200 cc to 10 < • Lightweight design is ideal for everyday laboratory use • 24 month warranty

Lab-Line Thermo-Flasks® feature inner vessels of borosilicate glass evacuated to 1 × 10–5 mm Hg to provide maximum coolant retention and excellent extended temperature retention for samples stored in liquid nitrogen or solid CO 2 . These flasks are available in stainless steel, enameled steel, or plastic exteriors—select models feature Model 2122 vented, clamped lids, carrying handles, and rubber

Stainless Steel Thermo-Flasks® with Handle and Lid

♦ Durable, corrosion-resistant stainless steel exterior APPARATUS

construction with carrying handle and vented lid GENERAL secured by toggle clamps Model 2124 ♦ Recommended for the safe transport of liquid nitrogen ORDERING INFORMATION Inside Outside Glass Capacity Diameter Diameter Height Ship Wt. Liner Model < Inches (cm) Inches (cm) Inches (cm) lbs. (kg) Model

2122 1.0 31⁄3 (8.5) 45⁄8 (11.6) 9 (22.9) 6 (2.7) 2140

2123 2.0 41⁄4 (10.8) 55⁄8 (13.9) 101⁄2 (26.7) 8 (3.6) 2141

2124 4.5 6 (15.2) 71⁄4 (18.4) 133⁄4 (34.9) 10 (4.5) 2142

2125 7.0 8 (20.3) 91⁄4 (23.5) 131⁄4 (33.7) 14 (6.4) 2149

Shallow Wide Mouth Flasks ♦ Convenient dish-shaped design is ideal for bench top use with crushed ice, dry ice, or alcohol See page 133 for ♦ Also great as a hot liquid container Freezers ♦ Stainless steel jacket and cushioned base (lids not included) will provide years of trouble-free use

Model 2128

ORDERING INFORMATION Inside Outside Glass Capacity Diameter Diameter Height Ship Wt. Liner Model ml Inches (cm) Inches (cm) Inches (cm) lbs. (kg) Model

2126 .20 3 (7.6) 41⁄8 (10.6) 3 (7.6) 4 (1.8) 2150

2127 30 4 (10.2) 51⁄8 (13.2) 31⁄2 (8.9) 6 (2.7) 2151

2128 500 41⁄2 (11.4) 6 (15.2) 33⁄4 (9.5) 6 (2.7) 2152

2129 1000 53⁄8 (13.6) 7 (17.8) 41⁄8 (10.7) 8 (3.6) 2153

2130 1900 6 (15.2) 71⁄4 (18.4) 51⁄2 (00.0) 10 (4.5) 2154

Lab-Line Instruments • International FAX (708) 450-5830 • E-mail: [email protected] • World Wide Web: http://www.labline.com 61 GENERAL APPARATUS ♦ ♦ ♦ ♦ Enameled SteelThermo-Flasks ♦ ♦ ♦ ♦ Plastic WideMouthFlasks ♦ ♦ ♦ Insulated Thermo-Cups ORDERING INFORMATION Model 2110 Ideal forcoldtraps down carryinghandles Models 2118–2121 and cushionedbases Enameled steelexteriors,borosilicateglassliners, and versatilityataneconomicalprice Safe storageofliquefiedgases,temperatureretention, Borosilicate glassinnervessel Vented lidpreventsgaspressurebuild-up carrying handleand“push-fit”insulatedlid Rugged, shock-absorbingplasticexteriorwith Low costcombinedwithhighefficiency or nitrogen Should notbeusedforstorageofliquidoxygen foamed in-placeinsulationbetween corrosion-resistant stainlesssteelwith Inner linerandoutershellconstructedof handling Unbreakable, evenwithexcessivelyrough Model 2113 aaiyDa i.Hih hpW.Liner ShipWt. Height Dia. Dia. Capacity 1.0 < n c)i.(m n c)ls k)Model (kg) lbs. (cm) in. (cm) in. (cm) in. nieOtieGlass Outside Inside 85 1.)(22 (2.7) (22.2) (14.6) (8.5) 3 1 ⁄ 3 "5 include insulatedlidsandfold- 3 ⁄ 4 Model 2133 "8 3 ⁄ 4 "6 ® 2140 ® ORDERING INFORMATION Model 2121 2120 2119 2118 2135 2133 2131 2117 2116 2115 2114 2113 ORDERING INFORMATION Model 2104 2102 2101 2108 aaiyDa i.Hih hpW.Liner ShipWt. Height Dia. Dia. Capacity Capacity 008 2.)9 8"(20.3) 10.0 . "(52 7 6" (15.2) 4.5 4 2.0 3 1.0 5 5 4"(10.2) 3.0 5 4"(10.2) 2.0 4 1.5 3 3"(7.6) 1.5 1.1 2 0.7 2 0.6 1 0.2 < . "(27 "(03 "(03 8(3.6) 8"(20.3) 8"(20.3) 7 6 7"(17.8) 5"(12.7) 4.0 4"(10.2) 2.0 1.0 . "(03 1 2.)1"(79 14(6.3) 11"(27.9) 11"(27.9) 8"(20.3) 8.0 < 1 1 n c)i.(m n c)ls k)Model (kg) lbs. (cm) in. (cm) in. (cm) in. nieDa OutsideDia. Inside Dia. 1 1 5 1 5 2113 nieOtieGlass Outside Inside ⁄ ⁄ 4 4 ⁄ ⁄ ⁄ ⁄ ⁄ 3 n c)i.(m n c)ls k)Model (kg) lbs. (cm) in. (cm) in. (cm) in. 8 2 2 8 4 1.)5 " (10.8) 1.)7 1.)11 7"(17.8) " (13.3) ⁄ without lids and carrying handles without lidsandcarrying 38 2 " (3.8) 89 4 " (8.9) 11 5"(12.7) " (8.9) 3 " (6.4) 3 " (5.7) 4 1.)1"(54 9 10"(25.4) " (17.1) 2122 with lids and carrying handles with lidsandcarrying 2117 1 1 1 5 5 3 3 3 1 3 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 8 8 8 8 8 4 4 ⁄ ⁄ ⁄ 2110 4 4 4 1.)9 2.)6(2.7) 10 " (13.9) 9"(22.9) " (11.4) 8(3.6) 7(3.2) 13"(33.1) " (13.9) 11"(27.9) " (13.9) 2.)17 " (23.3) 13 " (18.4) 6(2.7) 11"(27.9) " (10.8) 95 11 " (9.5) 13 " (8.3) 8 " (6.9) 1 1 3 1 3 3 1 3 1 1 ⁄ 2 egtSi t Cover ShipWt. Height ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 4 2 8 8 4 4 8 2 4 2.)4 (1.8) " (21.6) 3.)10(4.5) 8(3.6) " (34.9) " (26.7) 9(4.1) " (29.2) 7(3.2) " (29.2) 5(2.3) 5(2.3) " (28.6) " (34.9) 4.)16(7.3) " (43.7) 2.)10(4.5) " (24.1) 6(2.7) " (18.4) 2125 2128 2104A 2101A 2102A 2108A 2146 2143 2148 2140 2163 2161 2142 2141 2165 2147 2145 2144 2104