DOCSLIB.ORG

Radiochemicals-Reagents-Catalogue

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Radiochemicals-Reagents-Catalogue CONTENTS Company profile 4 Labeling, certificates, calibration 5 Packaging 5 Certified containers type A 6 List of radiochemicals Antimony 124Sb 7 Neodymium 147Nd 10 Arsenic 76As 7 Phosphorus 32P 11 Barium 133Ba 7 Phosphorus 32P 11 Bromine 82Br 7 Rhenium 186Re 11 Cadmium 115mCd 7 Rubidium 86Rb 11 Caesium 131Cs 7 Samarium 153Sm 11 Caesium 137Cs 8 Scandium 46Sc 11 Calcium 45Ca 8 Selenium 75Se 12 Chromium 51Cr 8 Silver 110mAg 12 Chromium 51Cr 8 Sodium 24Na 12 Chromium 51Cr EDTA 8 Strontium 85Sr 12 Cobalt 58Co 8 Strontium 89Sr 12 Cobalt 60Co 9 Strontium 90Sr 12 Copper 64Cu 9 Strontium 90Sr 13 Europium 152Eu 9 Sulphur 35S 13 Gold 198Au 9 Terbium 160Tb 13 Holmium 166Ho 9 Thallium 204TI 13 Iodine 131I 9 Thulium 170Tm 13 Indium 114mIn 10 Ytterbium 169Yb 14 Iridium 192I 10 Yttrium 90Y 14 Iron 59Fe 10 Zinc 65Zn 14 Lutetium 177Lu 10 3 Company profile Radioisotope Centre POLATOM is a part of National Centre for Nuclear Research (NCBJ). With over 60 years of experience in radioisotopes production we are focused on the following products: radiopharmaceuticals, standard solutions and reference sources, industrial sealed sources and listed here radiochemicals. At present our products are regularly used in more than 70 countries worldwide. Quality Assurance System established at the Radioisotope Centre POLATOM in the area of manufacturing, sales, dispatching and transport of radioactive materials is certified according to PN-EN ISO 9001:2015-10 Orders When ordering please refer to availability and specify at least the following information: - the specific product code - name of the product - activity - quantity Enquires and orders - required shipping date should be sent to: National Centre for Nuclear Research (NCBJ), Radioisotope Centre POLATOM Andrzej Soltan 7 05-400 Otwock Poland Phone: +48 22 273 1820 or +48 22 273 1840 fax: +48 22 779 7381 e-mail: [email protected] [email protected] www.polatom.pl 4 Labelling, certificates, calibration Label on a packaging contains data referring to the preparation: the nature of the product, activity at a given date, the volume, lot number, expiration, the product code, container type and number and certificate number. Calibration specifies time (hours, days) after shipping, for which the nominal activity is calculated. A certificate is attached to every shipment of radioactive material The radiochemicals are mainly manufactured from the targets irradiated in Research Reactor MARIA. Packaging Determination of the type of packaging is settled by dangerous nature of the transported material: depending on its radiotoxicity, radioactivity and its tendency to spread. Packing and transportation of radiochemical preparations are performed in accordance with international Atomic Energy Agency (IAEA) requirements and the Regulations for Safe Transport of Radioactive materials (IATA, ADR) The typical packaging of radioactive material consists of following elements: - vial, - shielding container, - metal can with styrofoam mould, - external cardboard box with styrofoam mould. Radiochemical preparations are packed in vials and shielding containers. The containers are sealed in a metal can containing a styrofoam mould. Then the can is fixed inside cardboard packaging. 5 Containers type A certified by POLATOM Standard shielding containers type A, non-returnable packaging, used for radiochemicals: Container Shielding / Lead Internal External sizes Mass of the Mass of the type coverage screen seating sizes Ø × h [mm] container transport material [mm] Ø × h [mm] [kg] packaging [kg] P-5 Lead / painted 5 25 × 55 35 × 66 0.44 1.14 P-7Z Lead / plastic 7 22/20.6 × 43.4 44 × 65 0.45 1.15 P-10 Lead / painted 10 25 × 54 45 × 75 1.00 1.70 P-20 Lead / plastic 20 28 × 54 65 × 95 2.92 3.62 P-30 Lead / plastic 30 28 × 52 87 × 112.5 6.11 6.80 P-40 Lead / painted 40 33 x 70 112 x 155 (190)* 15.70 19.70 P-50 Lead / painted 50 35 × 85 142 × 187 32.00 36.00 P-60 Lead / steel 60 33 × 70 165 × 200 (235)* 44.50 48.40 * with handle P-5 P-7Z P-10 P-20 P-30 P-40 P-50 P-60 6 List of radiochemicals Antimony 124Sb Bromine 82Br Code: RSb-4 Code: RBr-3 Name, chemical formula Antimony(III) chloride, Name, chemical formula Potassium bromide, KBr SbCl3 Form 5M HCl solution Form aqueous solution Radionuclidic purity > 99.0% (including 122Sb) Radionuclidic purity > 98.0% Calibration 7 days Calibration 48 hours Expiration 28 days Expiration 72 hours Storage 15°C ÷ 25°C Storage 15°C ÷ 25°C Specific activity > 40 MBq/mg Sb Specific activity > 40 MBq/mg Br Half life 60.2 days Half life 1.47 days Availability ~3 weeks advanced Availability ~2 weeks advanced order order Arsenic 76As Cadmium 115Cd Code: RAs-3 Code: RCd-3 Name, chemical formula Arsenic(III) chloride, Name, chemical formula Cadmium chloride, AsCl3 CdCl2 Form 1M HCl solution Form 0.1M HCl solution Radionuclidic purity > 99.5% Radionuclidic purity > 95.0% Calibration 24 hours Calibration 7 days Expiration 72 hours Expiration 28 days Storage 15°C ÷ 25°C Storage 15°C ÷ 25°C Specific activity > 10 MBq/mg As Specific activity > 2.0 MBq/mg Cd Half life 1.078 days Half life 44.56 days Availability ~2 weeks advanced Availability ~6 weeks advanced order order Barium 133Ba Caesium 134Cs Code: RBa-7 Code: RCs-2 Name, chemical formula Barium chloride, Name, chemical formula Caesium chloride, BaCl2 CsCl Form 1M HCl solution Form aqueous solution Radionuclidic purity > 99.9% Radionuclidic purity > 98.0% Calibration 7 days pH 6.0 ÷ 8.0 Expiration 28 days Calibration 7 days Storage 15°C ÷ 25°C Expiration 28 days Specific activity > 25 MBq/mg Ba Storage 15°C ÷ 25°C Half life 10.7 years Specific activity > 400 MBq/mg Cs Availability from stock Half life 2.065 years Availability from stock 7 Caesium 137Cs Chromium 51Cr Code: RCs-3 Code: RCr-3 Name, chemical formula Caesium chloride, Name, chemical formula Sodium chromate(VI), CsCl Na2CrO4 Form 0.1M HCl solution Form aqueous solution Radionuclidic purity > 99.9% Radionuclidic purity > 99.5% Calibration 7 days Radiochemical purity > 98.0% Expiration 28 days pH 6.0 ÷ 8.0 Storage 15°C ÷ 25°C Calibration 7 days Specific activity carrier free Expiration 28 days Half life 30.02 years Storage 15°C ÷ 25°C Availability from stock Specific activity > 3.5 GBq/mg Cr Half life 27.7 days Availability from stock Calcium 45Ca Code: RCa-3 Name, chemical formula Calcium chloride, Chromium 51Cr EDTA CaCl 2 Code: RCr-9 Form aqueous solution Name, chemical formula Chromium 51Cr EDTA Radionuclidic purity > 99.9% Form isotonic solution pH 5.0 ÷ 8.0 Radionuclidic purity > 99.5% Calibration 7 days Radiochemical purity > 98% Expiration 28 days Calibration 7 days Storage 15°C ÷ 25°C Expiration 28 days Specific activity > 40 MBq/mg Ca Storage 5°C ÷ 25°C Half life 163 days Specific activity > 4,3 GBq/mg Cr Availability ~8 weeks advanced Half life 27.7 days order Availability from stock 51 Chromium Cr 58 Code: RCr-2 Cobalt Co Code: RCo-2 Name, chemical formula Chromium(III) chloride, Name, chemical formula Cobalt(II) chloride, CrCl3 CoCl Form 0.1 M HCl solution 2 Form 1M HCl solution Radionuclidic purity > 99.5% Radionuclidic purity > 99.0% Radiochemical purity > 95.0% Calibration 7 days Calibration 7 days Expiration 28 days Expiration 28 days Storage 15°C ÷ 25°C Storage 15°C ÷ 25°C Specific activity carrier free Specific activity > 3.5 GBq/mg Cr Half life 70.83 days Half life 27.7 days Availability ~8 weeks advanced Availability from stock order 8 Cobalt 60Co Gold 198Au Code: RCo-3 Code: RAu-2 Name, chemical formula Cobalt(II) chloride, Name, chemical formula Tetrachloroauric(III) CoCl 2 acid, HAuCl4 Form 0.1M HCl solution Form 3M HCl solution Radionuclidic purity > 99.5% Radionuclidic purity > 90.0% Calibration 7 days Calibration 48 hours Expiration 28 days Expiration 72 hours Storage 15°C ÷ 25°C Storage 15°C ÷ 25°C Specific activity > 370 MBq/mg Co Specific activity > 150 MBq/mg Au Half life 5.271 years Half life 2.69 days Availability from stock Availability ~2 weeks advanced order Copper 64Cu Code: RCu-3 Holmium 166Ho Name, chemical formula Copper(II) chloride, Code: RHo-1 CuCl2 Name, chemical formula Holmium chloride, Form 0.1M HCl solution HoCl3 Radionuclidic purity > 99.5% Form 0.1M HCl solution pH 2.0 ÷ 3.0 Radionuclidic purity > 99.0% Calibration 24 hours Calibration 24 hours Expiration 48 hours Expiration 48 hours Storage 15°C ÷ 25°C Storage 15°C ÷ 25°C Specific activity > 40 MBq/mg Cu Specific activity > 400 MBq/mg Ho Half life 12.7 hours Half life 26.8 hours Availability ~2 weeks advanced Availability ~2 weeks advanced order order 131 Europium 152Eu Iodine I Code: REu-1 Code: RI-10 Name, chemical formula Europium(III) chloride, Name, chemical formula Sodium iodide, NaI EuCl3 Form 0.1M HCl solution Form solution in carbonate buffer Radionuclidic purity > 99.0% Radionuclidic purity > 99.9% Calibration 7 days Radiochemical purity > 97.0% Expiration 28 days pH > 8.5 Storage 15°C ÷ 25°C Calibration 6 days Specific activity > 200 MBq/mg Eu Expiration 28 days Half life 13.52 years Storage 15°C ÷ 25°C Availability from stock Specific activity > 400 GBq/mg I, carrier free Half life 8.02 days Availability from stock 9 Indium 114mIn Code: RIn-2 Name, chemical formula Indium(III) chloride, InCl3 Form 0.1M HCl solution Radionuclidic purity > 99.0% Calibration 7 days Expiration 28 days Storage 15°C ÷ 25°C Specific activity > 10 MBq/mg In Half life 49.5 days Availability ~7 weeks advanced order Iridium 192Ir Lutetium 177Lu Code: RIr-2 Code: RLu-3 Name, chemical formula Ammonium Name, chemical formula Lutetium chloride, hexachloroiridate(VI), LuCl3 (NH ) IrCl 4 2 6 Form 0.04M HCl solution
Load more

Recommended publications
  • IUPAC-NIST Solubility Data Series. 87. Rare Earth Metal Chlorides in Water and Aqueous Systems
    IUPAC-NIST Solubility Data Series. 87. Rare Earth Metal Chlorides in Water and Aqueous Systems. Part 1. Scandium Group „Sc, Y, La… Tomasz Mioduskia… Institute of Nuclear Chemistry and Technology, Warsaw, Poland Cezary Gumińskib… Department of Chemistry, University of Warsaw, Warsaw, Poland Dewen Zengc… College of Chemistry and Chemical Engineering, Hunan University, Hunan, People’s Republic of China ͑Received 12 May 2008; revised manuscript received 20 May 2008; accepted 20 May 2008; published online 15 October 2008͒ This volume presents solubility data for rare earth metal chlorides in water and in ternary and quaternary aqueous systems. The material is divided into three parts: scan- dium group ͑Sc, Y, La͒, light lanthanide ͑Ce-Eu͒, and heavy lanthanide ͑Gd-Lu͒ chlo- rides; this part covers the scandium group. Compilations of all available experimental data are introduced for each rare earth metal chloride with a corresponding critical evalu- ation. Every such evaluation contains a tabulated collection of all solubility results in ͑ ͒ water, a scheme of the water-rich part of the equilibrium Y, La, Ln Cl3 –H2O phase diagram, solubility equation͑s͒, a selection of suggested solubility data, and a discussion of the multicomponent systems. Because the ternary and quaternary systems were almost never studied more than once, no critical evaluations or systematic comparisons of such data were possible. Only simple chlorides ͑no complexes͒ are treated as the input sub- stances in this work. The literature ͑including a thorough coverage of papers in Chinese and Russian͒ has been covered through the middle of 2007. © 2008 American Institute of Physics. ͓DOI: 10.1063/1.2956740͔ Key words: aqueous solution; lanthanum chloride; phase diagram; scandium chloride; solubility; yttrium chloride.
    [Show full text]
  • Rights Reserved Organoscandium Chemistry
    @ 1974 KARL DEE SMITH ALL RIGHTS RESERVED ORGANOSCANDIUM CHEMISTRY by KARL DEE SMITH A DISSERTATION Submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Chemistry in the Graduate School of The University of Alabama UNIVERSITY, AL1\BAMA 1973 --- e···· ACKNOWLEDGMENTS The author wishes to express his deep appreciation to: Dr. D. F. Smith and Dr. B. W. Ponder for their understanding, encouragement, and guidance throughout the course of this research. Steve Seale for his many hours spent in setting up a workable computer library to permit the completion of this work to become a reality. Merle Watson for his many services rendered in the making of the special glass apparatus needed throughout the course of this work. The computer operators, Steve Watson, Mike Webb, Bob McGwier, Al Martin, and Bill Gammon for their cooperation in efficiently running the hundreds of computer programs needed for the completion of this work. Sam Hassel, G. M. Nichols, and Harold Moore for their many services rendered in the maintenance, stockroom, and electronics fields, respectively. The secretaries for their services rendered. Segail Friedman for typing the final manuscript of this work. His wife, Becky, .and to Angela and Christopher for their confidence, encouragement, understanding, and love shown in every way. ii TABLE OF CONTENTS Page ACKNOWLEDGivIENTS • • ii LIS'l' OF TABLES . iv LIST OF FIGURES • vi Chapter I. INTRODUCTION 1 II. EXPERIMENTAL METHODS 9 Inert Atmosphere Glove Box . 9 Reagents and Solvents . • • • 9 Preparation of Compounds . • • • . • • • . 11 Preparation of Samples . • . • • • . • • 18 Computer Programs . • . • . • • . 19 Instrumentation ;, . • • • . • • • 20 III.
    [Show full text]
  • Z. Chern. 1961, 1, 332-4. Vit, J. Collect. Czech. Chern. Comm
    Scandium Chloride COMPONENTS: ORIGINAL MEASUREMENTS: Kirmse, E. M. (1) Scandium chloride; ScC13; [ 10361-8[:-9] ,I I Z. Chern. 1961, 1, 332-4. (2~ Uethano1; CH 40; I67-S6-1] VARIABLES: PREPARED BY: One temperature: T/K = 298.2 T. Mioduski EXPERIMENTAL VALUES: The solubility of ScC1 in methanol at 25 0 C was reported to be 3 45.5 mass % The corresponding molality calculated by the compiler is 5.52 mol kg-1 The solid phase was reported to be ScC1 .3CH 0H which could be fUrther dehydrated to SCC1 .2CH 0H (see discussion below). 3 3 3 3 COMMENTS AND/OR ADDITIONAL DATA: Since in the saturated solution there are almost 6 moles of solvent per mole of salt, the author suggests that SCC1 has a coordination number of 6. 3 AUXILIARY INFORMATION METHOD/APPARATUS/PROCEDURE: SOURCE AND PURITY OF MATERIALS: Isothermal method. About 10-15 cm3 alcohol Anhydrous ScC13 prepared by heating SC203 and activated charcoal in a stream of and ScC13 placed in glass stoppered bottles and mechanically rotated at 200 rpm in a chlorine at 900-1000oC (1). Source and thermostat for 14-15 days. After allowing purity of SC203 not specified. the equilibrated sIns to settle for 3 days, aliquots were removed for analyses. Sc Methanol was purified by fractional dis­ determined gravimetrically by evaporation of tillation from caS04.0.5H20. solvent followed by ignition to SC203' Identical results obtained by centrifuging the equilibrated sIns prior to analyses. Solid phase composition determined by analysis of wet residues. Samples dried in vacuum (11 ± 1 mm Hg) over P20~ at 18 ± lOC ESTIMATED ERROR: and weighed every 24 hours unt11 the mass was Soly: nothing specified.
    [Show full text]
  • 1. Give the Correct Names for Each of the Compounds Listed Below. A
    1. Give the correct names for each of the compounds listed below. a) NaCl sodium chloride n) ZrS2 zirconium sulfide b) FrBr francium bromide o) AgI silver iodide c) KF potassium fluoride p) BaSe barium selenide d) RaS radium sulfide q) MgO magnesium oxide e) LiI lithium iodide r) LaBr3 lanthanum bromide f) Li3N lithium nitride s) Sr3N2 strontium nitride g) AlBr3 aluminum bromide t) Cd3As2 cadmium arsenide h) CdCl2 cadmium chloride u) Rb2Se rubidium selenide i) K2O potassium oxide v) Rb3N rubidium nitride j) InF3 indium fluoride w) BaF2 barium fluoride k) ZnO zinc oxide x) ZrTe2 zirconium telluride l) Y2O3 yttrium oxide y) Cs3P cesium phosphide m) CaTe calcium telluride z) Y2O3 yttrium oxide 2. Write the correct chemical formula for each of the following compounds. a) potassium bromide KBr n) potassium nitride K3N b) zinc bromide ZnBr2 o) aluminum bromide AlBr3 c) lithium iodide LiI p) zinc phosphide Zn3P2 d) scandium chloride ScCl3 q) magnesium sulfide MgS e) magnesium chloride MgCl2 r) hafnium chloride HfCl4 f) magnesium oxide MgO s) barium sulfide BaS g) hydrogen sulfide H2S t) tantalum oxide Ta2O5 h) gallium iodide GaI3 u) zirconium nitride Zr3N4 i) sodium oxide Na2O v) potassium selenide K2Se j) magnesium selenide MgSe w) germanium fluoride GeF4 k) calcium fluoride CaF2 x) francium phosphide Fr3P l) aluminum oxide Al2O3 y) zinc arsenide Zn3As2 m) beryllium chloride BeCl2 z) scandium telluride Sc2Te3 L. h. s. – Chemistry – Nomenclature – Answers – Page 1 3. Give the correct names for each of the compounds listed below. a) CaSO4 calcium
    [Show full text]
  • Preparing High-Purity Anhydrous Sccl3 Molten Salt Using One-Step Rapid Heating Process
    applied sciences Article Preparing High-Purity Anhydrous ScCl3 Molten Salt Using One-Step Rapid Heating Process Junhui Xiao 1,2,3,4,*, Chao Chen 1,2, Wei Ding 1, Yang Peng 1, Kai Zou 1, Tao Chen 1 and Zhiwei Zou 1 1 Sichuan Provincial Engineering Lab of Non-Metallic Mineral Powder Modification and High-Value Utilization, Southwest University of Science and Technology, Mianyang 621010, China; [email protected] (C.C.); [email protected] (W.D.); [email protected] (Y.P.); [email protected] (K.Z.); [email protected] (T.C.); [email protected] (Z.Z.) 2 Institute of Multipurpose Utilization of Mineral Resources, Chinese Academy of Geological Sciences, Chengdu 610041, China 3 Key Laboratory of Sichuan Province for Comprehensive Utilization of Vanadium and Titanium Resources, Panzhihua University, Panzhihua 617000, China 4 Key Laboratory of Ministry of Education for Solid Waste Treatment and Resource Recycle, Southwest University of Science and Technology, Mianyang 621010, China * Correspondence: [email protected]; Tel.: +86-139-9019-0544 Received: 7 July 2020; Accepted: 27 July 2020; Published: 28 July 2020 Abstract: In this study, a one-step rapid heating novel process was used to prepare high-purity anhydrous scandium chloride molten salt with low-purity scandium oxide. High-purity anhydrous ScCl3 molten salt was used as the Sc-bearing raw material for preparing the Sc-bearing master alloy. Inert gas was used to enhance the purity of anhydrous scandium chloride and reduce the hydrolysis rate of scandium. The results show that high-purity scandium chloride (purity, 99.69%) with the scandium content of 29.61%, was obtained, and the hydrolysis rate of scandium was 1.19% under the conditions used: removing ammonium chloride; residual crystal water temperature of 400 ◦C; m(Sc2O3):m(NH4Cl) = 1:2.5; holding-time of 90 min; heating-rate of 12 ◦C/min; and argon flow of 7.5 L/min.
    [Show full text]
  • Periodic Table of Elements
    The origin of the elements – Dr. Ille C. Gebeshuber, www.ille.com – Vienna, March 2007 The origin of the elements Univ.-Ass. Dipl.-Ing. Dr. techn. Ille C. Gebeshuber Institut für Allgemeine Physik Technische Universität Wien Wiedner Hauptstrasse 8-10/134 1040 Wien Tel. +43 1 58801 13436 FAX: +43 1 58801 13499 Internet: http://www.ille.com/ © 2007 © Photographs of the elements: Mag. Jürgen Bauer, http://www.smart-elements.com 1 The origin of the elements – Dr. Ille C. Gebeshuber, www.ille.com – Vienna, March 2007 I. The Periodic table............................................................................................................... 5 Arrangement........................................................................................................................... 5 Periodicity of chemical properties.......................................................................................... 6 Groups and periods............................................................................................................. 6 Periodic trends of groups.................................................................................................... 6 Periodic trends of periods................................................................................................... 7 Examples ................................................................................................................................ 7 Noble gases .......................................................................................................................
    [Show full text]
  • Safety Data Sheet
    SAFETY DATA SHEET Revision Date 18-February-2020 Revision Number 2 1. Identification Product Name Scandium(III) chloride hexahydrate Cat No. : 11219 CAS-No 20662-14-0 Synonyms No information available Recommended Use Laboratory chemicals. Uses advised against Food, drug, pesticide or biocidal product use. Details of the supplier of the safety data sheet Company Importer/Distributor Manufacturer Fisher Scientific Alfa Aesar 112 Colonnade Road, Thermo Fisher Scientific Chemicals, Inc. Ottawa, ON K2E 7L6, 30 Bond Street, Ward Hill, MA 01835-8099 Canada Tel: 800-343-0660 Fax: 800-322-4757 Tel: 1-800-234-7437 Email: [email protected] www.alfa.com Emergency Telephone Number During normal business hours (Monday-Friday, 8am-7pm EST), call (800) 343-0660. After normal business hours, call Carechem 24 at (800) 579-7421. 2. Hazard(s) identification Classification WHMIS 2015 Classification Not classified under the Hazardous Products Regulations (SOR/2015-17) Based on available data, the classification criteria are not met Label Elements None required 3. Composition/Information on Ingredients Component CAS-No Weight % Scandium chloride (ScCl3), hexahydrate 20662-14-0 <=100 4. First-aid measures ______________________________________________________________________________________________ Page 1 / 6 Scandium(III) chloride hexahydrate Revision Date 18-February-2020 ______________________________________________________________________________________________ Eye Contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention. Skin Contact Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur. Inhalation Remove to fresh air. Get medical attention immediately if symptoms occur. Ingestion Clean mouth with water and drink afterwards plenty of water.
    [Show full text]
  • CHLORINATION and SELECTIVE VAPORIZATION of RARE EARTH ELEMENTS Daniel Gaede Montana Tech of the University of Montana
    Montana Tech Library Digital Commons @ Montana Tech Graduate Theses & Non-Theses Student Scholarship Spring 2016 CHLORINATION AND SELECTIVE VAPORIZATION OF RARE EARTH ELEMENTS Daniel Gaede Montana Tech of the University of Montana Follow this and additional works at: http://digitalcommons.mtech.edu/grad_rsch Part of the Metallurgy Commons Recommended Citation Gaede, Daniel, "CHLORINATION AND SELECTIVE VAPORIZATION OF RARE EARTH ELEMENTS" (2016). Graduate Theses & Non-Theses. 72. http://digitalcommons.mtech.edu/grad_rsch/72 This Thesis is brought to you for free and open access by the Student Scholarship at Digital Commons @ Montana Tech. It has been accepted for inclusion in Graduate Theses & Non-Theses by an authorized administrator of Digital Commons @ Montana Tech. For more information, please contact [email protected]. CHLORINATION AND SELECTIVE VAPORIZATION OF RARE EARTH ELEMENTS by Daniel W. Gaede A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Metallurgical and Materials Engineering Montana Tech 2016 i Abstract Rare earth elements are part of the lanthanide series in the periodic table. The uses and applications for these elements are ever increasing. Applications vary from smart phones to medical imaging equipment and more. Current separation techniques used today are hydrometallurgically intensive. The purpose of this study was to investigate a pyrometallurgical alternative to separate rare earth elements in ores. The proposed method, chlorination, would convert the rare earth oxides to chlorides and then apply vapor phase separation techniques to isolate the rare earth chlorides by temperature. Various reagent grade rare earth oxides were initially studied to determine chlorination efficiencies. Chlorination optimization experiments were then performed on Yb2O3, where the parameters were refined.
    [Show full text]
  • Berenice González Santiago Phd Thesis
    SYNTHESIS AND PROPERTIES OF SCANDIUM CARBOXYLATE METAL-ORGANIC FRAMEWORKS Berenice González Santiago A Thesis Submitted for the Degree of PhD at the University of St Andrews 2015 Full metadata for this item is available in St Andrews Research Repository at: http://research-repository.st-andrews.ac.uk/ Please use this identifier to cite or link to this item: http://hdl.handle.net/10023/6904 This item is protected by original copyright Synthesis and properties of scandium carboxylate metal-organic frameworks This thesis is submitted in partial fulfilment for the degree of Doctor of Philosophy in the Faculty of Science of the University of St Andrews by Berenice González Santiago, MSc September 2014 Supervisor: Prof. Paul A. Wright University of St Andrews Declarations 1. I, Berenice González Santiago, hereby certify that this thesis, which is approximately 40000 words in length, has been written by me, that it is the record of work carried out by me and that it has not been submitted in any previous application for a higher degree. I was admitted as a research student in September, 2010 and as a candidate for the degree of Doctor of Philosophy in October, 2011 the higher study for which this is a record was carried out in the University of St Andrews between 2010 and 2014. Date ……………………. Signature of Candidate …………………….. 2. I hereby certify that the candidate has fulfilled the conditions of the Resolution and Regulations appropriate for the degree of PhD in the University of St Andrews and that the candidate is qualified to submit this thesis in application for that degree.
    [Show full text]
  • Lecture 9-12-11A
    Lecture September 12 Goal for today: Chapter 3 Part II HW and Quiz due September 19th - through Section 3.6 p. 97 - naming compounds Don’t worry about hydrates Skip 3.10 for now Will NOT do Sec. 3.11 Organic Compounds at all!! CHEM131 - Fall 11 - September 12 1 Ions with Multiple Charges WebElements: the periodic table on the world-wide web http://www.webelements.com/ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 hydrogen helium 1 2 H He 1.00794(7) Key: 4.002602(2) lithium beryllium element name Transition boron carbon nitrogen oxygen fluorine neon 3 4 atomic number 5 6 7 8 9 10 Li Be symbol B C N O F Ne 6.941(2) 9.012182(3) 2003 atomic weight (mean relative mass) 10.811(7) 12.0107(8) 14.0067(7) 15.9994(3) 18.9984032(5) 20.1797(6) sodium magnesium Metals aluminium silicon phosphorus sulfur chlorine argon 11 12 13 14 15 16 17 18 Na Mg Al Si P S Cl Ar 22.989770(2) 24.3050(6) 26.981538(2) 28.0855(3) 30.973761(2) 32.065(5) 35.453(2) 39.948(1) potassium calcium scandium titanium vanadium chromium manganese iron cobalt nickel copper zinc gallium germanium arsenic selenium bromine krypton 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 K Ca Sc Ti V Cr Mn Fe Co Ni Cu Zn Ga Ge As Se Br Kr 39.0983(1) 40.078(4) 44.955910(8) 47.867(1) 50.9415(1) 51.9961(6) 54.938049(9) 55.845(2) 58.933200(9) 58.6934(4) 63.546(3) 65.38(2) 69.723(1) 72.64(1) 74.92160(2) 78.96(3) 79.904(1) 83.798(2) rubidium strontium yttrium zirconium niobium molybdenum technetium ruthenium rhodium palladium silver cadmium indium tin antimony tellurium iodine xenon 37 38 39 40
    [Show full text]
  • John Patrick Stephen Mowat Phd Thesis
    SYNTHESIS, CHARACTERISATION AND ADSORPTION PROPERTIES OF METAL-ORGANIC FRAMEWORKS AND THE STRUCTURAL RESPONSE TO FUNCTIONALISATION AND TEMPERATURE John Patrick Stephen Mowat A Thesis Submitted for the Degree of PhD at the University of St. Andrews 2012 Full metadata for this item is available in Research@StAndrews:FullText at: http://research-repository.st-andrews.ac.uk/ Please use this identifier to cite or link to this item: http://hdl.handle.net/10023/3195 This item is protected by original copyright This item is licensed under a Creative Commons License Synthesis, Characterisation and Adsorption Properties of Metal-Organic Frameworks and the Structural Response to Functionalisation and Temperature. A thesis presented for the degree of Doctor of Philosophy In the Faculty of Science of the University of St. Andrews By John Patrick Stephen Mowat MChem (Hons) July 2012 1. Candidate’s declarations: I, John Mowat, hereby certify that this thesis, which is approximately 49,500 words in length, has been written by me, that it is the record of work carried out by me and that it has not been submitted in any previous application for a higher degree. I was admitted as a research student in October, 2008 and as a candidate for the degree of Doctor of Philosophy in October, 2009; the higher study for which this is a record was carried out in the University of St Andrews between 2008 and 2012. Date …………………… signature of candidate ……………………………… 2. Supervisor’s declaration: I hereby certify that the candidate has fulfilled the conditions of the Resolution and Regulations appropriate for the degree of Doctor of Philosophy in the University of St Andrews and that the candidate is qualified to submit this thesis in application for that degree.
    [Show full text]
  • Material Safety Data Sheet
    LTS Research Laboratories, Inc. Safety Data Sheet Scandium (III) Chloride ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 1. Product and Company Identification ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Trade Name: Scandium (III) Chloride Chemical Formula: ScCl3 Recommended Use: Scientific research and development Manufacturer/Supplier: LTS Research Laboratories, Inc. Street: 37 Ramland Road City: Orangeburg State: New York Zip Code: 10962 Country: USA Tel #: 855-587-2436 / 855-lts-chem 24-Hour Emergency Contact: 800-424-9300 (US & Canada) +1-703-527-3887 (International) ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 2. Hazards Identification ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Signal Word: Warning Hazard Statements: H315 Causes skin irritation H319 Causes serious eye irritation H335: May cause respiratory irritation Precautionary Statements: P261: Avoid breathing dust/fume/gas/mist/vapors/spray P264: Wash face, hands, and any exposed skin thoroughly after handling. P271: Use only outdoors or in a well-ventilated area P280: Wear protective gloves/protective clothing/eye protection/face protection P302+P352: IF ON SKIN: Wash with soap and water P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
    [Show full text]