DOCSLIB.ORG

SAN DIEGO SHIP MODELERS GUILD MEETING Mike Lonnecker Address Redacted

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
SAN DIEGO SHIP MODELERS GUILD MEETING Mike Lonnecker Address Redacted FEBRUARY 2016 NEWSLETTER VOLUME XLIV, NO.28 OFFICERS MINUTES OF THE 12 JANUARY 2016 Guild Master SAN DIEGO SHIP MODELERS GUILD MEETING Mike Lonnecker address redacted . Mike Lonnecker, guild master, opened the meeting. There were no guests or new members present (except newly returned Don Bienvenue). First Mate A total of 17 members were in attendance. Lee Greene address redacted The newsletter editor’s report was given by Chuck Seiler. He Purser emphasized the need for a new newsletter editor and guild photographer. Gary Seaton He also requested items for the newsletter. (Note: Guy Lawrie indicated address redacted Jon Sanford he would consider taking Editor and said he would take ) Editor over as photographer. Chuck Seiler address redacted The purser, Gary Seaton, gave his report. The balance as of 1 January . was $<redacted>. Everyone was reminded that annual dues of $20 should be paid as soon as possible. If dues are not paid by the March meeting, loss of Log Keeper membership will result. Bob McPhail . Dr. Kevin Sheehan, museum liaison, gave his report. He talked about SPECIAL redecking of the STAR OF INDIA. Maintenance will last approximately ASSISTANTS two years. He also talked about training for sail crews which will be Webmeister needed for the various sailing vessels. Barry Rishel address redacted Mike Lonnecker mentioned future auctions. The museum has donated several items which will be auctioned a little at a time each meeting. Two Presentations ship model kits and books were auctioned off at the meeting. Coordinator Peter Jaquith Barry Rishel briefly talked about the website. The latest newsletter has address redacted been posted on it. Established in 1972 by Pete Jaquith gave a list of speakers and topics for future scheduled Bob Wright and Russ programs. Bob McPhail gave a presentation on Ship Camouflage and Merrill Bob Costa will give a talk about the FAIR AMERICAN in February and Pete Jaquith will discuss sail making in March. Continued on Page 2 San Diego Ship Modelers’ Guild is affiliated with and supports the Maritime Museum of San Diego http://sdshipmodelersguild.org/ MINUTES-Continued Under OLD Business, the by laws were finally meeting that the Fair Coordinator call those approved by the required number of votes. This was who have been unable to attend, but who have accomplished by mail in ballots and contacting guild worked the Fair, in order to give them an members by phone. (Editor's note: As of Sunday, opportunity to participate. This was 'vetoed' by despite asking for detailed numbers, I have not the coordinator, with the recommendation that received totals from the phone-in/email-in and people who cannot attend the meetings email mail in ballot. We are told it passed...and so it or phone their choices. Additionally, I never has.) received the Fair sign up sheet-to date so people could see what as available. People The 2016 Nautical Research Guild Convention who would like to work the Fair but are unable will be held in San Diego October 6, 7, and 8 2016. to attend the meeting should contact the Dr. Ray Ashley will be the keynote speaker at the Guildmaster.) The museum will again sponsor the annual convention dinner. competition for best wood ship model. The model can be from a kit or scratch built. Application forms The San Diego County Fair will be held again this will be available “on line. Everyone is requested to year. The Sign Up Sheet for volunteering in the start saving any catalogs they may get. These will booth will be available at the February meeting. be used as “handouts” at the Fair. (Editor's Note: The sign up sheet went around New Business: Nomination of Guild officers will be at both the December meeting and the January held at the February meeting. Positions include: meeting. It was noted that there are 3 or 4 guild master, first mate, purser, editor, and log people who have worked the Fair in the past keeper. If you would like to run for one of these that have been unable to make the meetings. It positions please indicate your desire at the February was suggested in the last newsletter and at the meeting. San Diego-Home of the 2016 Nautical Research Guild Conference -2- PETERBORO CANOE by DON DRESSEL Midwest Kit (Intermediate) Length 35 7/8" - Height 1 - 1/2" , scale 1"=1'. I have decided to bring in another small model, my Peterboro Canoe. Built quite a few years ago, it is nonetheless a very good model, particularly for those first starting to plank. It is a Midwest wooden kit model, the PETERBORO CANOE - SKU 982 which cost about $50.00. I purchased mine years ago when I was at the NRG Conference in Maine, where we visited the Model Shipways store. They had the kit there and I purchased it. Originally built to take to Japan, I found out from my friend Mr. Tanaka that Canoe's were not considered a wooden ship model, as they had no masts or sails, so I had to built something else to take. According to Wikipedia, the Peterborough Canoe Company (yes, Peterboro is spelled differently) was founded in 1892 by William H. Hill and Elihu Edwards, who manufactured wooden canoes in a factory located at the corner of King and Water Streets in the city of Peterborough, Ontario, Canada. They merged with several other canoe companies during the ensuing years. In 1961 the company ceased production. Still, there are those who are willing to pay extra for a hand-crafted wooden canoe, and the forms and designs of the Peterborough canoes are still in use by canoe craftsmen today. The original boats are now prized as antiques and restored by hobbyists. Canoe building is such an important part of Peterborough's history that the city has declared a National Canoe Day, which is celebrated near the end of June each year. -3- SHOW AND TELL-Continued Black Pearl by GARY SEATON Metal Earth 360 Kit Scale: 1:550 (+/-) Gary's BLACK PEARL (Top and Left). Don's BLACK PEARL (Bottom) Note similarities. I wasn’t aware before this meeting that Don Dressel had already presented this little fun-build model to our cousins in the north (SMA) but it must show that such a model is one whose “time has come!” It was a pretty easy build, though it does take some care; an errant thumb can destroy one’s otherwise fine efforts. Completing this model added nicely to my holiday break. The kit has two metal sheets of parts that need to be separated and bent “just so” and fitted together for locking into final position. The maker of this 4” metal kit says that there was a real ship of this name sailed by the English pirate Capt. Henry Morgan in the late 17th century. That may be true and I would like to think that it is and that this cute little model is actually based on that one. What is at least equally possible is that the model is based on the Black Pearl sailed by the more famous pirate Capt. Jack Sparrow in the Pirates of the Caribbean movie series. Sparrow’s ship was formerly named Wicked Wench when she could be toured at the special dock in Disneyland. The ship for Jack Sparrow and crew can be seen in the attached photo. It was a galleon of about 110’ long and 25’ at the beam. -4- SHOW AND TELL-Continued RMS QUEEN MARY by Don Bienvenue Revell Kit (Plastic) Scale: 1: 570 Highlights of Queen Mary's Career Construction : Construction began in 1930 at the John Brown Shipyard on the Clyde in Scotland. Work on the ship was suspended in 1931 due to a depressed economy. Construction was continued in 1934. Launched on September 20, 1934. World War II: In March of 1940, the British government conscripted the Queen Mary to be used as a troop career. The interior furnishings of the ship were removed and put into storage for the duration of the war. The ship was painted a dull gray. Postwar: The Queen Mary returned to transatlantic passenger service after the war and sold to the City of Long Beach in 1967 and has been used as a hotel and museum. Comparitive Dimensions: Titanic: Length = 832', Gross Tonnage= 46, 328 Queen Mary: Length= 1019', Gross Tonnage = 81, 237 QE2: Length = 763', Gross Tonnage = 67, 140 The Model The Queen Mary kit is a plastic kit, manufactured by Revell. It is an old model, having been in production since the late 1960's. The scale is an odd size, being at 1:570. Because the model has been around so long, the injection molds are wearing out, causing much flashing on the parts. These parts all have to be worked on, to remove the flashing and injection circular markings. -5- SHOW AND TELL-Continued The Hull: The hull is made up of two halves. There was some warpage to one of the hull sides, so super-glue was used, alternating with plastic model cement to glue the halves together. The halves were then clamped together overnight. The warpage has been removed. This hull was an exercise in masking for paint work because the hull has red, black and white paint. Windows and potholes within the white section of the hull were inked black using a Rapidograph techinical/drafting pen, pen size 000. Chart-Pak artists tape, 1/32"wide was used for the pinstripe between the red and black areas of the hull. No white tape was available, I had yellow tape and spray painted it white, hoping the paint would dry before the adhesive on the other side of the tape.
Load more

Recommended publications
  • The EFO Officers: the President: Vice-President: Secretary/Treasurer: Ken Myers Richard Utkan Debbie Mcneely 1911 Bradshaw Ct
    The EFO Officers: the President: Vice-President: Secretary/Treasurer: Ken Myers Richard Utkan Debbie McNeely 1911 Bradshaw Ct. 240 Cabinet 4733 Crows Nest Ct. Walled Lake, MI 48390 Milford, MI 48381 Brighton, MI 48116 phone: (248) 669-8124 phone: (248) 685-1705 phone: (810) 220-2297 Board of Directors: Board of Directors: Ampeer Editor: Jim McNeely Jeff Hauser Ken Myers 4733 Crows Nest Ct. 18200 Rosetta 1911 Bradshaw Ct. Brighton, MI 48116 Eastpointe, MI 48021 Walled Lake, MI 48390 phone: (810) 220-2297 phone: (810) 772-2499 phone: (248) 669-8124 Ampeer subscriptions are The Next Meeting: $10 a year US & Canada Date: Saturday, Dec. 7 Time: 7:30 p.m. and $17 a year world wide. Place: starts at Ken’s house: 1911 Bradshaw Ct., Walled Lake What’s In The December 2002 Issue: GatorFoam – Upcoming EFO Meeting – Fast ROG Planes – Model for Geared AF15 – Bantam Update – More On Chargers – Dale Martell’s Planes – David Byrd's Macci and Scott Black’s Latest – November EFO Meeting - Powering the JM GlasCraft Cheap Thrills – MFA Belt-Drive & Amptique – Bantam done (almost 99%) - Upcoming Events GatorFoam Fast ROG Planes From: Lyndon Percey [email protected] Rueben Schneider, 2248 E. Ocotillo Rd., Phoenix, AZ 85016-1149 sent a sample of Dear Sir, GatorFoam. It is a very dense foamb oard. Thank you for the reply regarding the It comes in sizes from 3/16” thick to 1 1/2” Wattage Reno Racer. It’s greatly thick and various sheet sizes up to 4‘x8‘. appreciated. I also have bought the Wattage The company that produces GatorF oam can Tangent, which comes with a geared 370 be found on the Web at: motor.
    [Show full text]
  • NEW to SHIP MODELING? Become a Shipwright of Old
    NEW TO SHIP MODELING? Become a Shipwright of Old These Model Shipways Wood Kits designed by master modeler David Antscherl, will teach you the skills needed to build mu- seum quality models. See our kit details online. Lowell Grand Banks Dory A great introduction to model ship building. This is the first boat in a series of progressive 1:24 Scale Wood Model Model Specifications: model tutorials! The combo tool kit comes com- Length: 10” , Width 3” , Height 1-1/2” • plete with the following. Hobby Knife & Multi Historically accurate, detailed wood model • Blades, Paint & Glue, Paint Brushes, Sand- Laser cut basswood parts for easy construction • paper, Tweezers, & Clamps. Dories were de- Detailed illustrated instruction manual • True plank-on-frame construction • veloped on the East Coast in the 1800’s. They Wooden display base included • were mainly used for fishing and lobstering. Skill Level 1 MS1470CB - Wood Model Dory Combo Kit - Paint & Tools: $49.99 MS1470 - Wood Model Dory Kit Only: $29.99 Norwegian Sailing Pram Muscongus Bay Lobster Smack 1:24 Scale Wood Model 1:24 Scale Wood Model Model Specifications: Model Specifications: Length 12½”, Width 4”, Height 15½ • Length 14½”, Width 3¾”, Height 14” • Historically accurate, detailed wood model • Historically accurate, detailed wood model • Laser cut basswood parts for easy construction • Laser cut basswood parts for easy construction • Detailed illustrated instruction manual • Detailed illustrated instruction manual • True plank-on-frame construction • True plank-on-frame construction • Wooden display base included • Wooden display base included • Skill Level 2 Skill Level 3 This is the second intermediate kit This is the third and last kit in this for this series of progressive model series of progressive model tutori- tutorials.
    [Show full text]
  • Minutes of 08 March 2006 Meeting
    MARCH 2006 NEWSLETTER VOLUME XXX, NO. 3 8 OFFICERS MINUTES OF 08 MARCH 2006 MEETING Guild Master Contributed by Bob McPhail Robert Hewitt phone redacted The night kicked off early with the NRG Conference planning meeting First Mate at 6 PM. Details of that meeting are outlined on page 11. Guildmaster K.C. Edwards Hewitt called the general meeting to order at 7 PM, asking for any guests or phone redacted new members introduce themselves. Jeffery Johnson introduced himself Purser Ron Hollod and stated that he was interested in sailing and working on the Benjamin phone redacted Latham. Editor (dot on horizon) Chuck Seiler PURSER’S REPORT: Ron Hollod reported the 31 December balance was phone redacted $<redacted>. With expenses and income (membership renewals), the balance address redacted as of January 31 $<redacted>. Yearly membership dues are $20.00. Log Keeper Bob McPhail EDITOR’S REPORT: Chuck Seiler then gave his editor’s report. All phone redacted members present received their newsletter. Inputs for the “Resource List” Newsletter discussed last month was requested. None were provided. Distribution Bob Wright ELECTIONS: Robert Hewitt announced that nomination of guild Robert Hewitt officers was open. The following nominations were made: Purser – Ron Established in Hollod, Log Keeper – Bob McPhail, Newsletter Editor- Bob Crawford, 1972 by First Mate- K.C. Edwards, and Guild master – Robert Hewitt. Elections Bob Wright and will be held/completed at the march meeting. Note: Since no election is Russ Merrill contested, a ballot will not be provided in the newsletter. (I’m sure I will soon hear from Sid regarding election reform and reliability of the ballot counter.) San Diego Ship Modelers’ Guild is affiliated with and OLD BUSINESS: supports the Maritime Museum Country Fair.
    [Show full text]
  • Model Ship Book 4Th Issue
    A GUIDE TO 1/1200 AND 1/1250 WATERLINE MODEL SHIPS i CONTENTS FOREWARD TO THE 5TH ISSUE 1 CHAPTER 1 INTRODUCTION 2 Aim and Acknowledgements 2 The UK Scene 2 Overseas 3 Collecting 3 Sources of Information 4 Camouflage 4 List of Manufacturers 5 CHAPTER 2 UNITED KINGDOM MANUFACTURERS 7 BASSETT-LOWKE 7 BROADWATER 7 CAP AERO 7 CLEARWATER 7 CLYDESIDE 7 COASTLINES 8 CONNOLLY 8 CRUISE LINE MODELS 9 DEEP “C”/ATHELSTAN 9 ENSIGN 9 FIGUREHEAD 9 FLEETLINE 9 GORKY 10 GWYLAN 10 HORNBY MINIC (ROVEX) 11 LEICESTER MICROMODELS 11 LEN JORDAN MODELS 11 MB MODELS 12 MARINE ARTISTS MODELS 12 MOUNTFORD METAL MINIATURES 12 NAVWAR 13 NELSON 13 NEMINE/LLYN 13 OCEANIC 13 PEDESTAL 14 SANTA ROSA SHIPS 14 SEA-VEE 16 SANVAN 17 SKYTREX/MERCATOR 17 Mercator (and Atlantic) 19 SOLENT 21 TRIANG 21 TRIANG MINIC SHIPS LIMITED 22 ii WASS-LINE 24 WMS (Wirral Miniature Ships) 24 CHAPTER 3 CONTINENTAL MANUFACTURERS 26 Major Manufacturers 26 ALBATROS 26 ARGONAUT 27 RN Models in the Original Series 27 RN Models in the Current Series 27 USN Models in the Current Series 27 ARGOS 28 CM 28 DELPHIN 30 “G” (the models of Georg Grzybowski) 31 HAI 32 HANSA 33 NAVIS/NEPTUN (and Copy) 34 NAVIS WARSHIPS 34 Austro-Hungarian Navy 34 Brazilian Navy 34 Royal Navy 34 French Navy 35 Italian Navy 35 Imperial Japanese Navy 35 Imperial German Navy (& Reichmarine) 35 Russian Navy 36 Swedish Navy 36 United States Navy 36 NEPTUN 37 German Navy (Kriegsmarine) 37 British Royal Navy 37 Imperial Japanese Navy 38 United States Navy 38 French, Italian and Soviet Navies 38 Aircraft Models 38 Checklist – RN &
    [Show full text]
  • Clipper Ships ~4A1'11l ~ C(Ji? ~·4 ~
    2 Clipper Ships ~4A1'11l ~ C(Ji? ~·4 ~/. MODEL SHIPWAYS Marine Model Co. YOUNG AMERICA #1079 SEA WITCH Marine Model Co. Extreme Clipper Ship (Clipper Ship) New York, 1853 #1 084 SWORDFISH First of the famous Clippers, built in (Medium Clipper Ship) LENGTH 21"-HEIGHT 13\4"­ 1846, she had an exciting career and OUR MODEL DEPARTMENT • • • Designed and built in 1851, her rec­ SCALE f."= I Ft. holds a unique place in the history Stocked from keel to topmast with ship model kits. Hulls of sailing vessels. ord passage from New York to San of finest carved wood, of plastic, of moulded wood. Plans and instructions -··········-·············· $ 1.00 Francisco in 91 days was eclipsed Scale 1/8" = I ft. Models for youthful builders as well as experienced mplete kit --·----- $10o25 only once. She also engaged in professionals. Length & height 36" x 24 " Mahogany hull optional. Plan only, $4.QO China Sea trade and made many Price complete as illustrated with mahogany Come a:r:1d see us if you can - or send your orders and passages to Canton. be assured of our genuine personal interest in your Add $1.00 to above price. hull and baseboard . Brass pedestals . $49,95 selection. Scale 3/32" = I ft. Hull only, on 3"t" scale, $11.50 Length & height 23" x 15" ~LISS Plan only, $1.50 & CO., INC. Price complete as illustrated with mahogany hull and baseboard. Brass pedestals. POSTAL INSTRUCTIONS $27.95 7. Returns for exchange or refund must be made within 1. Add :Jrt postage to all orders under $1 .00 for Boston 10 days.
    [Show full text]
  • RESIN SUB CHASER Enter the World of Resin Kits on a Plastic Kit Budget! by Phil Kirchmeier
    Ship | How-To Building resin ship models isn’t difficult if you start small and easy. Iron Shipwright’s sub chaser is an ideal starter kit. Jim Forbes photo Building a RESIN SUB CHASER Enter the world of resin kits on a plastic kit budget! By Phil Kirchmeier igh prices and the need for expert- you study the parts and the drawings, you then coated over them with thin super Hlevel skills have kept you from can figure it out. Overall, the kit is simple glue. This worked as quickly as super building a resin ship model, eh? Fear not! without being boring – a great starter kit. glue alone, but produced a softer filler Try an “entry-level” resin ship like Iron It’s a good idea to wash resin parts that was easier to sand. Shipwright’s 1/350 scale PC-461-class before assembly. Mold-release agents and My kit had bubbles in some of the patrol craft (also known as a “sub chaser”). sometimes oils from the resin coat the superstructure detail. Rather than try to It takes about the same skills, tools, and surface of the parts and make it difficult fill and fix the detail, I carved away the knowledge as a plastic ship model. for glues and paints to adhere. I washed affected items and replaced them with Chasing subs with resin. Iron all the parts with soap and water and parts from Gold Medal Models’ pho- Shipwright’s PC-461 is a highly detailed allowed them to air-dry. All the assem- toetched doors and hatches set, 2.
    [Show full text]
  • Scratch Building a Model Ship
    SCRATCH BUILDING A MODEL SHIP CHAPTER 1: GETTING STARTED Introduction Scratch building a model ship is not as difficult as it appears. You’ve probably built several models from kits, so you already possess many of the skills required for scratch building. The only additional skills required are interpreting the lines on the plans, selecting the materials to use in the building process, and developing the method of construction. Over-and-above the manual skills required to build a model from scratch are three more factors: time, patience, and ingenuity. It takes much more time to build from scratch than it does to build a kit, so you must be prepared to devote at least 500 hours to a scratch-built project, probably much more. Patience is an absolute necessity, for you will find yourself spending much time developing new skills, and it is quite possible that you build items that you are not satisfied with and decide to scrap them and do them over again. Ingenuity is a definite plus, because you will constantly be called on to use new, sometimes outlandish, materials or methods. Thus, an open and creative mind will be your greatest asset. In building a kit, there are no plans to interpret, no materials to buy; the manufacturer gives you assembly diagrams that show you how to fit the supplied pieces together. The method of construction is also supplied by the manufacturer in the form of written and pictorial instructions. You simply follow all the step-by-step directions to finish with the end product.
    [Show full text]
  • Interpreting Line Drawings for Ship Modelling
    Interpreting Line Drawings for Ship Modelling Russell Barnes Published by the Nautical Research Guild and Model Ship World. One the members asked if I would write a few words about interpreting lines drawings and using them in ship modelling. Actually, I wrote a bit about this over on Dry Dock Models, so rather than reinvent the wheel again, I will repost the relevant material here for anyone who is interested. This subject might be of interest to those of you who wish to learn a bit more about scratch building or kit bashing. I will approach it in parts, and even so, I will only be going over the basics so there will be questions about lines drawings that I do not cover. First, let us take a Model Shipways plan as an example. It has been redrawn, probably from some original source. There are three drawings in a set of lines. There is the sheer profile (side view), the half breadth, (looking down through the top or up through the bottom at one side of the hull), and the body plan (view down the middle of the hull using one half of each cross section).These drawings have been faired, meaning that the draftsman has gone through the drawing and worked it out so that all three drawings agree with each other and produce a smooth hull. If there is any discrepancy in any of the drawings at any point, then the plan is not fair and will not produce a usable set of frames from which one could build a model.
    [Show full text]
  • IPMS Seattle January 2021
    Seattle Chapter News Seattle Chapter IPMS/USA January 2021 Tips on Working with Photoetch December was certainly different this year, as we expected it would be. We had a big Zoom session where 26 members dis- cussed images of 158 different models they’ve completed since the beginning of the pandemic. By popular demand, we’ll be featuring a similar ‘show and tell’ at each of our future Saturday Meeting Zoom sessions, including the one this coming Saturday – just send your (.jpg) pictures directly to [email protected] beforehand so I can organize them in time for the meeting. Make sure to give each image a filename that starts with your name. Size doesn’t matter. That’s about as much as I can promise until things start opening up, unfortunately. The same goes for our annual Spring Show, which is looking more and more like April of 2022. Maybe we’ll be able to find a way to run the show sooner. Now on to something more interesting… A few new things I’ve learned about working with photoetch… While several armor kit manufacturers have earned a reputation for stuffing their kits with photoetch, I was ill-prepared for what I found when I started building my 1/350th scale U.S.S. Wasp Marine Assault Carrier. The truth is, modelers who build steel-navy ships have forgotten more about using photoetch than I have ever learned building armor. Word. Let’s face it, photoetch makes or breaks a steel-navy ship model. You might (initially) be attracted to a ship model by its big guns, or perhaps a detailed flight deck, or even the nice lines of a large man-o-war, but it will be the PE that will produce the ‘whoa!’ factor.
    [Show full text]
  • MAD MONTHLY DOG the Newsletter of IPMS Boise March 2011
    MAD MONTHLY DOG The Newsletter of IPMS Boise March 2011 Resurrection winner Paul Erlendson’s 1/24th scale Protar Ferrari 126C2 This month- The Vandervoort Memorial M DM March 2011 2 Last September’s meeting coincided with a festival that the church held for it’s paritioners. The thought then was to have a model show this year to show the church what we do. The thought was to also have a take and make for the kids. The subject was revisited this month as a way of thanking the church for letting us meet there. Kent said he would get in touch with the national organization to arrange for kits for the take and make. So this Sep- tember plan on showing off your wears to the church and build with the kids. Maybe we’ll get a new member or two and kiddle a fire in the kids. We also have not heard anything about the kits we sent “down range.” The assumption is that they made it okay. This month is the Vandervoort for cars, trucks, bikes, and wheeled military vehicles. MEETING MINUTES Next year’s themes are- March - The Vandervoort May - The Bill Bailey ( Build something you bought from Bill’s collection) August - Childhood Memeories ( Build a kit from your childhood or something you remember from it.) November - Vignettes and dioramas Your Executive Board members are- President - Bill Speece Vice President - Brian Geiger Treasurer - Jeff D’Andrea Secretary and Editor - Tom Gloeckle Chapter Contact - Kent Eckhart M DM March 2011 3 Since this month is the Curt Vandervoot Memorial “Wheel’s on Wheel’s, I hope everyone has done a top notch job and put in lots of time and effort on their kit.
    [Show full text]
  • Dynamic Model Identification of Ships and Wave Energy Converters
    Journal of Marine Science and Engineering Article Dynamic Model Identification of Ships and Wave Energy Converters Based on Semi-Conjugate Linear Regression and Noisy Input Gaussian Process Yanjun Liu 1,2,†, Yifan Xue 1,2,*,† , Shuting Huang 1,2,*, Gang Xue 1,2 and Qianfeng Jing 3 1 Institute of Marine Science and Technology, School of Mechanical Engineering, Shandong University, Qingdao 266237, China; [email protected] (Y.L.); [email protected] (G.X.) 2 Laboratory for Marine Geology, Qingdao National Laboratory for Marine Science and Technology, Qingdao 266200, China 3 Navigation College, Dalian Maritime University, Dalian 116026, China; [email protected] * Correspondence: [email protected] (Y.X.); [email protected] (S.H.) † These authors contributed equally to this work and should be considered co-first authors. Abstract: Reducing the carbon emissions of ships and increasing the utilization of marine renewable energy are the important ways to achieve the goal of carbon neutrality in ocean engineering. Estab- lishing an accurate mathematical model is the foundation of simulating the motion of marine vehicles and structures, and it is the basis of operation energy efficiency optimization and prediction of power generation. System identification from observed input–output data is a practical and powerful method. However, for modeling objects with different characteristics and known information, a sin- gle modeling framework can hardly meet the requirements of model establishment. Moreover, there are some challenges in system identification, such as parameter drift and overfitting. In this work, Citation: Liu, Y.; Xue, Y.; Huang, S.; three robust methods are proposed for generating ocean hydrodynamic models based on Bayesian Xue, G.; Jing, Q.
    [Show full text]
  • Dealer Looks at the Ship Model Market: Collecting and Market Trends
    Dealer Looks at the Ship Model Market: Collecting and Market Trends • BY: R. MICHAEL WALL *Based on notes from a presentation at the 17th Annual Nautical Research Guild Conference, Gloucester, Massachusetts, October 13th, 1990. As a dealer in ship models, I have been asked to discuss the ship model market as my clients and other collectors view it—and as you as ship model builders would like to see it. Basically the major development has been the acceptance of ship models as a legitimate decorative art form. I realize that this has been a hotly debated issue between ship model makers and marine painters, but it is a point of view that most of my clients have come to accept. This tenet is very much in their minds when they come in to purchase a model. This presentation will be an informal one, and primarily pictorial, as it will be necessary to draw comparisons among a number of examples of current work. You will hear me mention the names of many model makers who are also members of Nautical Research Guild. These individuals were not selected because I favor them over others, but because their work illustrates the points I wish to make. Another thing to bear in mind is that this presentation is made from a commercial viewpoint. I am looking at the market as a dealer, and I am representing the work of a number of you in the audience (and some of you who are reading this printed version), so bear in mind that I approach this field as a business endeavor.
    [Show full text]