Why Guy with Synthetic Ropes?
Total Page:16
File Type:pdf, Size:1020Kb
WHY GUY WITH 2019 SYNTHETIC ROPES? NO RF INTERACTION LIGHT ·WEIGHT EASY HANDLING· ·COST· EFFECTIVE WHY MASTRANT? DESIGNED FOR GUYING UV WHERE WE CAN SUPPORT YOU RESISTANCE· HIGH STRENGTH· LOW ELONGATION· – A NO· STRETCH WEATHER C DURABILITY WIDE· RANGE OF ACCESSORIES· AND ”MUST HAVES“ FOR ANTENNA WORK B A E D HOW? CHOOSE APPROPRIATE ·GUYROPE CALCULATE F LENGTHS THINK· ABOUT IT ·DO IT·REGULARLY· CHECK IT A C B TERMINATION AND COUPLING TENSIONING & ATTACHING A B TYPICAL INSTALLATIONS + RECOMMENDED GUY ROPES Wire antenna Vertical Mast C suspension antenna 25-100mm Lattice tower PRICE Size of couplers TYPE OF USE con- high Up to Up to Up to Up to Up to Up to £ ventional tension 20m, 40m, 10m with 20m, 20m 60m (incl. VAT) wire - heavy 3 el. 3-B or 5 el. Yagi 7 el. 3 stack of Longer spools Carabiner Shackle Turnbuckle wire, long VHF CODE antennas 25-50mm 50-100mm for 20m tribander 5 el. Yagi available 160m ... Yagi 20m breaking strength (BS) safe working load (SWL) Meters LEVELS* 2-3 3-5 2-3 3-5 2-3 3-6 [lbs.] 100 31 1 Chain MASTRANT®P STRETCH = ELONGATION: 2.4%, CORE = POLYESTER, COVER = POLYESTER 2 (1/16“) 220 70 13 n/a 0.18 P-2 5 5 6 3 (1/8“) 440 130 18 7 0.25 P-3 5 5 6 3 (9/64“) NEW! 660 200 24 9 0.38 P-3 6 5 6 4 (5/32“) 970 290 28 11 0.36 P-4 6 5 6 5 (3/16“) 1190 360 41 n/a 0.53 P-5 6 5 6 6 (1/4“) 1870 560 72 n/a 0.94 P-6 8 6 8 8 (5/16“) STRETCH 2870 860 88 n/a 1.06 P-8 10 6 8 10 (3/8“) 2,4% 4190 1260 114 n/a 1.37 P-10 HD 7 10 12 (1/2“) 4850 1460 147 n/a 1.76 P-12 HD 8 12 14 (9/16“) 7060 2120 198 n/a 2.38 P-14 - 10 14 MASTRANT®R NEW! STRETCH = ELONGATION: 2.4%, CORE = POLYESTER, COVER = POLYESTER (REFLECTIVE COLOR) 3 (1/8“) 440 130 21 n/a 0.29 R-3 5 5 6 5 (3/16“) 1160 360 53 n/a 0.69 R-5 6 5 6 MASTRANT®C NEW! STRETCH = ELONGATION: 2.4%, CORE = POLYESTER, COVER = POLYESTER (CAMOUFLAGE) 3 (9/64“) 660 200 33 13 0.46 C-3 6 5 6 6 (1/4“) 1870 560 80 n/a 1.04 C-6 8 6 8 EXTRA MASTRANT®M STRONG STRETCH = ELONGATION: <1.2%, CORE = DYNEEMA® DM 20, COVER = POLYESTER 1 (3/64“) 220 70 27 n/a 0.32 M-1 5 5 6 2 (3/32“) 490 150 31 11 0.37 M-2 5 5 6 3 (1/8“) 860 260 51 18 0.61 M-3 6 5 6 4 (5/32“) 1980 600 103 n/a 1.24 M-4 7 5 6 5 (3/16“) 2650 790 163 n/a 1.96 M-5 8 6 8 6 (1/4“) STRETCH 4080 1220 205 n/a 2.46 M-6 10 7 10 8 (5/16“) < 1,2% 5730 1720 293 n/a 3.52 M-8 HD 8 12 10 (3/8“) 8490 2550 500 n/a 6 M-10 - 10 16 12 (1/2“) 12130 3640 716 n/a 8.59 M-12 - 12 20 * LEVELS = NUMBER OF GUY ATTACHMENT POINTS. OTHER ASSUMPTIONS: WIND SPEED UP TO 100mph, DISTANCE BETWEEN ANCHOR POINT AND BASE OF MAST > 70% OF THE HEIGHT DETAILED INSTRUCTIONS, USEFUL TIPS, TRICKS AND ADVICE ON WEBSITE WWW.MASTRANT.COM MASTRANT®P MASTRANT®R MASTRANT®C MASTRANT®M ”JEWELLERY FOR YOUR TOWER“ PRICES £ A: Terminating A, B: Coupling B: Attaching Thimbles (stainless A4) Spring hooks - Carabiners (stainless A4) Mast clamps (stainless: threads A4, plates A2) ATH02 2 mm (min.int.diam. 8 mm) 0.21 AHO04 4 mm (BS: 500 lb.) 1.14 ACM1306 universal 3 dir., masts Ø 15-53 mm 15.72 ATH03 3 mm (min.int.diam. 10 mm) 0.24 AHO05 5 mm (BS: 880 lb.) 1.14 ACM1310 universal 3 dir., masts Ø 15-102 mm 16.55 ATH04 4 mm (min.int.diam. 11 mm) 0.31 AHO06 6 mm (BS: 1050 lb.) 1.34 ACM1406 universal 4 dir., masts Ø 32-85 mm 20.97 ATH05 5 mm (min.int.diam. 13 mm) 0.41 AHO07 7 mm (BS: 1320 lb.) 2.17 ACM1410 universal 4 dir., masts Ø 32-127 mm 22.07 ATH06 6 mm (min.int.diam. 14 mm) 0.52 AHO08 8 mm (BS: 1870 lb.) 2.72 ACM2304 light 3 direct., masts Ø 10-34 mm 11.69 ATH08 8 mm (min.int.diam. 18 mm) 0.86 AHO10 10 mm (BS: 2500 lb.) 4.69 ACM2404 light 3-4 dir., masts Ø 26-52 mm 15.59 ATH10 10 mm (min.int.diam. 24 mm) 1.34 A7AZ11 for climbing, screw lock (4400 lb.) 7.59 ATH12 12 mm (min.int.diam. 30 mm) 1.55 A7AZ11T for climbing, twist lock (4400 lb.) 17.- ATH14 14 mm (min.int.diam. 32 mm) 2.17 Mast clamps (galvanised) ACL330 3 directional, masts Ø 30-55 mm 7.59 Chain quick-acting couplers (stainless A4) ACL445 4 directional, masts Ø 45-75 mm 8.97 Duplex wire rope clips (stainless A4) ACC04 4 mm, max.opn.5.5 mm (1100 lb.) 1.34 ADC02 2 mm (M4, wrench 7) 0.97 ACC05 5 mm, max.opn.6.5 mm (3000 lb.) 1.69 ADC03 3 mm (M4, wrench 7) 1.14 ACC06 6 mm, max.opn.7.5 mm (4400 lb.) 2.38 ADC04 4 mm (M5, wrench 8) 1.69 ACC07 7 mm, max.opn.8.5 mm (5500 lb.) 3.10 ADC05 5 mm (M5, wrench 8) 2.21 ACC08 8 mm, max.opn.9.5 mm (7300 lb.) 3.79 ADC06 6 mm (M6, wrench 10) 3.07 ACC10 10 mm, max.opn.12 mm (12100 lb.) 6.55 ADC08 8 mm (M8, wrench 13) 4.66 ACC12 12 mm, max.opn.14.5 mm (15400 lb.) 10.17 Steel cords with thimble ends (stainless A4) +1 m ADC10 10 mm (M10, wrench 17) 8.62 ASR206 ø 2 mm, 6 m (wire ant over tree) 6.55 0.34 ASR402 ø 4 mm, 2 m (stainless 7x7, 9 kN) 7.24 1.10 ASR502 ø 5 mm, 2 m (stainless 7x7, 15 kN) 10.- 1.69 ASR602 ø 6 mm, 2 m (stainless 7x7, 22 kN) 13.45 2.24 ASR802 ø 8 mm, 2 m (stainless 7x19, 33 kN) 20.34 4.31 Shackles (stainless A4) ASE04 4 mm, 8x14 mm hole (1200 lb.) 1.52 ASE05 5 mm, 10x17 mm hole (2000 lb.) 1.69 ASE06 6 mm, 12x21 mm hole (2900 lb.) 2.03 ASE07 7 mm, 14x24 mm hole (3900 lb.) 2.24 ASE08 8 mm, 16x28 mm hole (5300 lb.) 2.52 Steel ropes by meter (stainless A4) ASE10 10 mm, 19x35 mm hole (8400 lb.) 4.83 ASR1X1 1 mm (stainless 7x7, 550 N) 0.17 ASE12 12 mm, 23x41 mm hole (12200 lb.) 6.90 ASR2X1 2 mm (stainless 7x7, 2.2 kN) 0.34 ASR3X1 3 mm (stainless 7x7, 5.2 kN) 0.66 ASR4X1 4 mm (stainless 7x7, 9 kN) 1.10 ASR5X1 5 mm (stainless 7x7, 15 kN) 1.69 Fist-grips (galvanised) ASR6X1 6 mm (stainless 7x7, 22 kN) 2.24 APC06 6 mm (5-8 mm, M6) 1.90 ASR8X1 8 mm (stainless 7x19, 33 kN) 4.31 APC08 8 mm (8-10 mm, M6) 2.59 ASRAX1 10 mm (stainless 7x19, 52 kN) 8.62 APC10 10 mm (10-12, M8) 3.79 Swivels (stainless A4) APC12 12 mm (12-14, M10) 4.83 ASW01 6 mm, 12x11 mm hole, 2900 lb. 4.66 APC16 16 mm (14-18, M12) 7.59 ASW02 8 mm, 16x16 mm hole, 5500 lb. 8.28 Threaded rods DIN 976 (stainless A4, metrical) ATR051 M5, length 1 m (3.3 ft.) 4.83 ATR061 M6, length 1 m (3.3 ft.) 5.17 Wedge sockets (galvanised) ATR081 M8, length 1 m (3.3 ft.) 8.28 AWC06 wedge socket 5-6.5 mm 12.41 B: Attaching ATR101 M10, length 1 m (3.3 ft.) 13.10 AWC08 wedge socket 6-8 mm 25.86 Fixing eyes (stainless A2) ATR121 M12, length 1 m (3.3 ft.) 18.97 AWC11 wedge socket 9-11 mm 23.79 AES061 eye - bolt M6 (hole 16, length 11, 1700 lb.) 1.69 AWC14 wedge socket 12-14 mm 27.24 AES081 eye - bolt M8 (hole 20, length 13, 3100 lb.) 2.38 AES101 eye - bolt M10 (hole 25, leng. 17, 5000 lb.) 4.45 AES121 eye - bolt M12 (hole 30, leng. 20, 7100 lb.) 5.17 AEN06 eye - nut M6 (hole 16, 1700 lb.) 1.41 AEN08 eye - nut M8 (hole 20, 3100 lb.) 2.03 AEN10 eye - nut M10 (hole 25, 5000 lb.) 3.41 Fasteners (stainless A4, metrical) AEN12 eye - nut M12 (hole 30, 7100 lb.) 4.14 Assortment of screws, nuts (hex., wing), washers (flat, lock, large) Bull-dog grips S.s. Galv. AEN16 eye - nut M16 (hole 35, 12700 lb.) 6.21 Sizes M6, M8, M10 and M12. M6 M8 M10 ASC02 2 mm (M3) 1.14 AE0540 bolt with eye M5 (5x40) 0.76 AFS**2X hex bolt 20 mm, DIN 933 0.10 0.22 0.38 ASC03 3 mm (M3) 1.31 AE0640 bolt with eye M6 (6x40) 1.- AFS**7X hex bolt 70 mm, DIN 933 0.31 0.22 0.76 ASC04 4 mm (M4) 1.38 AE0860 bolt with eye M8 (8x60) 1.69 AFS**AX hex bolt 100/130, DIN 933 0.34 0.76 1.72 ASC05 5 mm (M5) 1.55 0.28 AE1070 bolt with eye M10 (10x70) 2.76 AFB**SX nut (hex 0.8D) DIN 934 0.04 0.09 0.19 ASC06 6 mm (M6) 1.72 0.34 A7A836 anchoring set 10x100 mm, 6600 lb.