DOCSLIB.ORG

Basic Stamp® Discovery

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Basic Stamp® Discovery PARALLAX BASIC STAMP® WHAT’S A DISCOVERY KIT MICROCONTROLLER? (WAM) The ultimate combo to get started STAMPS IN CLASS CURRICULUM with BASIC Stamp programming. This is a prerequisite For All “Stamps in Class” Includes everything but a PC Curriculum and power supply. Contains the The number one starting point for using the BASIC Stamp 2 BASIC Stamp 2 module, Board of (either the Board of Education® Education carrier board and the What’s a Microcontroller? (BOE) full kit, or the HomeWork (WAM?) parts and text. The Discovery Kit ships with an Board is needed to use What’s a Microcontroller? “everything-you-need” components package that includes Over 40 hands-on activities with jumper wires, handy tact switches, LED’s, a servo motor, complete PBASIC 2.5 support. sensors, passives, IC’s and more. Gets you building projects What’s a Microcontroller? (WAM) answers the question upon opening the box. Perfect place to start for either an of how to design customized, intelligent inventions using the BASIC Stamp® 2. Activities using motion, light, sound engineer or anyone getting into the world of embedded and tactile feedback introduce the user to basic principles systems. Enables user to program the BASIC Stamp 2, build in programming, electronics, math and physics. Program 40+ hands-on activities, learn to write your own PBASIC circuits for light, sound and motor control. Over 40 hands- programs and solve real world engineering problems with a on activities including reaction timer game, potentiometer- controlled servo, 7-segment LED light meter, Nokia Cell microcontroller. Phone ringtone player and more. Write and download PBASIC code to a BASIC Stamp®, build circuits on the Part No. Description Price breadboard and implement them with components which include: LED’s, 7-Segment display, pushbuttons and a 32PX27807 USB Version Discovery Kit 159.00 servo. 32PX7500009 Power Supply 9.95 KEY WAM FEATURES: • Most popular starting point for everyone using the Board of Ed (BOE) programming board and BASIC Stamp® BASIC STAMP module • Program circuits for light, sound and motor control 1 STARTER KIT • Over 40 hands-on activities with complete PBASIC 2.5 sup- port Includes BS1-IC module, BASIC • Hours needed to complete: 40 Stamp manual, Super Carrier Board, • Level of difficulty (1-10): 3 CD ROM, BS1 Serial Adapter and Part No. Description Price serial cable. Power supply not 32PX28152 WAM parts and text $68.95 included. 32PX28122 WAM parts only 45.00 32PX28123 WAM text only 25.00 Part No. 32PX27205 • Price: $58.95 PROFESSIONAL DEVELOPMENT BOARD BASIC High quality, fully integrated ® platform for Basic Javelin and STAMP ACTIVITY KIT Ubicom Stamp®. A wide variety of It teaches the fundamentals of typical I/O (LED’s, LCD interface, button, etc.) are built in. Three BASIC stamp microcontrollers sockets allow the accommodation and programming or robot- of BSI-IC, 24 or 40 pin Basic ics. Simple experiments use Stamp, 24 pin Javelin Stamp modules as well as Sx28 motion, light and sound. Each AC/DP microcontroller with an SX-Key. Other features: chapter closes with instructions 16 discrete blue LEDs, five blue 7 segment displays, L293D high current driver, pulse generator (1Hz, 10, 100 for building a simple project. Includes: BASIC Stamp Kit, or 1KHz), RJ11 connector, RS-232 DCE part. The USB BASIC Stamp 2 microcontroller, parts and PCB. Serial cable (mini B), power supply and serial cable are not interface cable, software CD and instruction guide. included but available separately. Part No. Description Price 03PX28138 Professional Dev. Board $157.95 Part No. 32PX90005 • Price $98.50 04580500006 USB A to mini B Cable 6.95 16D75000007 12V DC Supply @ 1A 14.00 Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax: (732) 381-1006 (732) 381-1572 101 PARALLAX MINIQ ARDUINO ROBOT V2.0 DIGITAL I/O BOARD KIT I/O Board Kit enables your 4WD, ASSEMBLED microcontroller to interface to high voltage circuits allowing you to read Our newly upgraded 4WD MiniQ mobile robot kit is especially up to 8 optically isolated inputs and designed for education/learning purposes. It comes fully control up to 8 isolated outputs. Inputs assembled and all your need is a PC with Arduino IDE and 4xAA battery. This new version of MiniQ 4WD Kit comes with can be a voltage from 5-30VDC (AC Arduino Leonardo controller (ATmega32u4) and also integrates compatible) and outputs can be either modules such as RGB LED, mechanical or solid state relays that photosensitive diode, infrared can switch up to 12A loads, such trasmitters, infrared receivers, as cooling fans, solenoids, heating infrared line tracking sensors, elements and more. light sensors, additional Simple parallel input/output control buttons and buzzer. for ease of use or you can use the serial interface to minimize I/O pin usage. The logic circuits operate from 3.3V to 5V making them Along with this mobile robot compatible with most microcontrollers. The ICs in the kit are all kit, we offer 8 lessons for socketed making replacement easy should it ever be necessary. 8 beginners, from entry-level green and 8 red LEDs indicate the status of input and outputs. 2 to line-following, obstacle yellow LEDs indicate relay/logic power. Inputs can be configured to avoidance, and remote control. Users can easily grasp through handle a different range of input voltages. the tutorial. All codings and tutorials are open and free to This kit does not include Omron 12A SPDT or Sharp 8A download. Solid State Relays, they must be purchased separately. This kit requires relays to operate. Soldering equipment and Part No. 32DFRROB0050 • Price: $105.00 experience is required for assembly. • Mechanical or Solid State Relay output • Configurable Input Voltage range IR REMOTE FOR BOE-BOT • Serial or parallel interface to inputs/outputs • LED indication of power and input/output status STAMPS IN CLASS CURRICULUM • AppMod compatible connection for Board of Education This 175 page text focuses on adding infrared • Power requirements: 12VDC @ 1A for relay power and 3.3 – communication and control to the Boe-Bot robot. 5VDC for logic power With this text, you’ll learn how to directly control the Boe-Bot game-controller style, remotely set roaming • Communication: Parallel or Synchronous Serial speed and distance, combine remote control and Part No. Description Price autonomous roaming functions, and remotely select autonomous roaming modes. New programming tech- 32PX27113 Digital I/O Kit $49.90 niques introduce designing user interfaces and menu 32PX400-00052 12A Relay SPDT 1.95 systems. The final project makes the BASIC Stamp 32PX400-00053 8A Solid State Relay 5.55 an IR remote command sequence interpreter for a remotely programmable Boe-Bot. Note: To complete all activities, you will need a fully assembled Boe- Bot with electronic components from the kit and a universal programmable remote control that supports a Sony TV. GPS RECEIVER W/CABLE Part No. Description Price 32PX28139 Parts Kit and Book $34.50 With the PMB-248 GPS Receiver 32PX29122 Parts Kit Only 12.50 you can track up to 12 satellites to pinpoint your location on the globe. SMART CARD With TTL and RS-232 level outputs Smart Cards are the size of a standard you can connect this receiver to any credit card. The pins are accessible through microcontroller or your PC. Small the gold plated contact pads embedded size and low power consumption in the card. When paired with the Smart Card Reader (#32320) connected to the I/O make this GPS receiver a great pins of a BASIC Stamp, Propeller, or other choice for robotics, vehicle tracking, microcontroller, the Smart Card can be used fleet management and auto pilot as for data storage, security systems, tracking systems, or identity authenitication. well as for navigation systems. • 1,000,000 erase/write cycles guaranteed with 10 year data retention • Built-in rechargeable battery for memory and RTC backup • Memory Organization: 256 x 8-bit, and 2048 x 8 bits, in eight 16-byte • Supports NMEA0183 V2.2 data protocol pages (#32322) • Includes cable for power, TTL and RS-232 connections • 2.5 ms write time, and 5 ms max write time with auto clear (#32322 and 32323) Specifications: • 3-byte Programmable Security Code for memory write/erase protection (#32321) • Power requirements: 3.3V - 5V DC @ ~80mA • 3-bit error counter (#32321) • Communication: TTL or RS-232 asynchronous serial @ 4800 • Power requirements: 2.7-5 VDC; 3 mA typical active current bps • Communication: I2C (CMOS) • Dimensions: 2.5 x 3 in (6.35 x 7.62 cm) • Dimensions: 1.25 x 1.25 x .35 in (32 x 32 x 9 mm) • -40 to +158 °F (-40 to +70 °C) Part No. Price Part No. Price Operating Temp Range: 32PX32321 $0.98 32PX32323 0.98 Part No. 32PX28500 • Price: $34.50 32PX32322 1.28 102 ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065 KNIVES / CUTTERS KNIFE SET CUTTING SET WITH 13 PC. SELF HEALING MAT Two quality knives in Includes X-acto #1 knife with cap, self a deluxe case plus 8 1 healing cutting mat (4" x 7 /4") and (5) assorted blades. #11 blades. Self healing mat contructed of special material. Protects table tops from cuts and nicks. Part No. 1-9 10+ 03RD73893 $10.95 $9.95 Part No. Price 03X7768 $8.50 DELUXE KNIFE SET 26 PC. SELF HEALING MATS Four quality knives in a deluxe case with 17 Part No. Description Price assorted blades. 03X7760 9" x 12" $9.95 03X7761 12" x 18" 17.95 Part No. 1-9 10+ 03X7762 18" x 24" 26.95 03RD73894 $28.95 $27.95 03X7763 24" x 36" 48.95 BOARD CUTTER SMALL METAL MITRE BOX SET • Cuts foam board, mat board, and illustration board • Easily cuts foam board, cardboard, and mats Part No.
Load more

Recommended publications
  • Wire Wrapping Tools 42-45 Connector Tools 46 Spring Hooks 47 Alignment Tools 48 Burnishers 49 Force Gauges 50 Knockout Kit 51
    Div. of Jonard Industries Tools for Telecom, Fiber Optics, CATV, Wireless and Electronics Industries Installation • Maintenance • Repair OVER 50 YEARS OF MANUFACTURING EXCELLENCE Catalog No. 110 Div. of Jonard Industries Established 1958 Established 1946 DESIGN TECHNOLOGY PRECISION QUALITY Established in 1958; Jonard Industries Corp is a prime manufacturer of Tools for the Telecom, Fiber Optic, CATV and Electronic Industries with designs for installation, maintenance and repair. The company was founded by engineers and technically oriented professionals whose spirit, guidance and influence continue to this very day. Jonard products are used in diversified applications. Our tools are used on “Airforce- One”, the space shuttle, nuclear submarines, and down to earth applications such as computers, telephone installations and production lines. We are proud to include AT&T, IBM, Hewlett Packard, Boeing, United Technologies, Comcast, Time Warner and many other prestigious companies on the list of satisfied Jonard customers. Our customers now number in the tens-of-thousands, due to our reputation, technical skills, dedication and our ability to meet their ever-increasing demands. Established in 1946; OK Industries blossomed as a major force in the telecommunications and electronics industries. In February 2003 Jonard Industries merged the operations of OK Industries into the “Jonard Family of Companies.” The result of this acquisition is a Global Manufacturing Powerhouse with over 100 years of combined experience. 134 Marbledale Road, Tuckahoe,
    [Show full text]
  • Breadboarding And, As You’Ll See, More Flexible When Using the Techniques I’M Going to Tell You About
    circuits and is best suited for building digital circuits. These techniques can FEATURE also be applied to analog or RF designs. The basic prototyping material is ARTICLE perfboard, such as that sold at Radio Shack. This material has holes on 0.1² (2.54-mm) centers and is available in Stuart Ball several sizes. The holes match the pin spacing on DIP ICs and many other components. You can get perfboard with plated- through pads on every hole, but I pre- fer the type without pads. It’s cheaper Breadboarding and, as you’ll see, more flexible when using the techniques I’m going to tell you about. GROUNDING A key area where many digital and microprocessor designs have problems is grounding. Early digital designs often used two-layer printed circuit boards, ometimes the with power and ground traces mixed s best way to test a with the signal traces on the top and With this offering, Stuart new circuit is to pro- bottom layers. pumps new life into the dy- totype it. If you are plan- As clock speeds and edge rates go ning to build only one, the prototype up, simple grounds such as this are less ing technique of may be the only one you ever put to- effective. A modern production digital prototyping. For electronics gether. Unfortunately, prototyping is design will typically use one or more slowly dying out in the electronics ground planes between the signal lay- experimenters, the cost of industry. Modern CAD tools let you ers to get a low-impedance ground. It is making a circuit board is too produce a circuit board layout in a few difficult to duplicate this with most hours.
    [Show full text]
  • MPS Series, Snap Action
    Pushbutton Switches MPS Series, Snap Action Features I Wire lug or pc terminals I Customer selected actuator cap size and color I Entire series epoxy sealed terminals I Actuator guards, decorative hardware, and silicone boot seals available Pushbutton Switches Typical performance characteristics Environmental specification Contact configuration. SPDT, DPDT Operating temperature . -15°C to +70°C Contact timing. Break-Before-Make Storage temperature . -15°C to +70°C Contact rating max. 3 A @ 125 VAC Solder heat resistance . wave solder capable to 265°C Electrical life. 50.000 cycles . and hand solder Contact resistance, initial . 10 mOhms max. Seal . epoxy sealed terminals Insulation resistance . 1,000 MOhms min. Dielectric strength . 1,500 Volts rms @ sea level Actuation force . 200-700 gf Material specifications Actuator travel . momentary .04 (1.0mm) Contacts . phosphor bronze silver clad . push on/off .098 (2.5mm) Actuator. copper alloy nickel plated Terminals . copper alloy silver plated Case . epoxy resin Frame. stainless steel Support Bracket . brass tin plated RoHS Directive 2002/95/EC . compliant Product key Typical product key MPS 1 03 F PC 04 Type MPS Pushbutton Switches, Snap Action, 3Amp Poles 1 1 pole 2 2 poles Contact 03 3 A @125 VAC Function single pole double pole D Push-On/Push-Off N Push-On/Push-Off F momentary R momentary Terminals blank wire lug RA right angle PC terminal PC printed circuit board WW wire wrap or extended PC PCV printed citrcuit board, with support Material 04 RoHS compliant D25 Catalogue No. 8-1773450-9 Dimensions are in mm and inches and Specifications subject to change.
    [Show full text]
  • Cable Glossary
    A / B / C / D / E / F / G / H / I / J / K / L / M / N / O / P / Q / R / S / T / U / V / W / X / Y / Z [ A ] Abrasion Resistance - Ability of a wire, cable or material to resist surface wear. AB Switch – a coaxial cable switch capable of switching one cable to one of two branch cable, A or B AC – 1) alternating current, 2) a UL cable type with flexible metal tape armor ACAR – aluminum conductor, aluminum-reinforced cable Accelerated Life Test - An accelerated life test is a test in which certain factors such as voltage, temperature, etc. to which a cable is subjected are increased in magnitude above normal operating values to obtain observable deterioration in a reasonable period of time and thereby afford some measure of the probable cable life under operating voltage, temperature, etc. Accelerator - A chemical additive which hastens a chemical reaction under specific conditions. A.C. Resistance - The total resistance offered by a device in an alternating resistance ACCR – aluminum conductor, composite reinforced aerial cable. Contains ceramic strength member to reduce sag at high temperatures (up to 210°C) ACSR – aluminum conductor, steel reinforced. A bare composite of aluminum and steel wires, usually aluminum around steel Acceptance Testing – after installation and before the cable is placed in regular service the specified test voltage is applied for 15 consecutive minutes Activator - A chemical additive used to initiate the chemical reaction in a specific current circuit due to inductive and capacitive effects, as well as the direct current chemical mixture. Active Current - In an alternating current, a component in phase with the voltage; the working component as distinguished from the idle or wattles component.
    [Show full text]
  • Model 3124 ADSL2+ Ipdslam User Manual
    Model 3124 ADSL2+ IpDSLAM User Manual Important This is a Class A device and is not intended for use in a residential environment. Sales Office: +1 (301) 975-1000 Technical Support: +1 (301) 975-1007 E-mail: [email protected] WWW: www.patton.com Part Number: 07M3124, Rev. A Revised: March 16, 2012 Patton Electronics Company, Inc. 7622 Rickenbacker Drive Gaithersburg, MD 20879 USA tel: +1 (301) 975-1000 fax: +1 (301) 869-9293 support: +1 (301) 975-1007 web: www.patton.com e-mail: [email protected] Copyright © 2012, Patton Electronics Company. All rights reserved. The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. The software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. Summary Table of Contents 1 Introduction.................................................................................................................................................... 7 2 Hardware Installation.................................................................................................................................... 11 3 Configuration................................................................................................................................................ 19 4 Operation and Maintenance.......................................................................................................................... 42 5 Troubleshooting...........................................................................................................................................
    [Show full text]
  • Global License
    ® Association Connecting Electronics Industries DRM-WHA-A (G) Global License This PDF document is licensed for simultaneous usage on every computer throughout all company facilities and locations. Global License files may be opened, copied or downloaded onto individual computers, or over computer networks, intranets, internet or web. Appropriate security measures and policies must be in place to prevent access to this PDF version of the IPC-DRM-WHA-A by anyone from outside the licensed company. DEMO ONLY Version This is a promotional sample of the IPC Training and Reference Guide — DRM-WHA-A / PDF Version. Please do not use this SAMPLE for training or reference purposes. IPC is a not-for-profit association for the electronics industry. Please respect our copyright. You may order printed or PDF versions of DRM-WHA-A from IPC at: www.ipctraining.org, [email protected], or call (847) 597-2862. Table of Contents Wire Harness Assembly Training & Reference Guide IPC DRM-WHA-A Table of Contents page Introduction to Wire Harness Assembly 2 Lead Free Soldering 6 Classification 8 Acceptance Criteria 9 Wire 10 Crimping 14 Open Barrel Crimps 15 Closed Barrel Crimps 24 Insulation Displacement 29 Ribbon Cable 30 Discrete Wire 37 Soldering Terminals 47 Wire Tinning 48 Pierced Terminals 49 Cup Terminals 53 Glossary 57 Based on: IPC/WHMA-A-620, Rev. A Requirements and Acceptance for Cable and Wire Harness Assemblies Wire Harness Assembly – Training & Reference Guide Introduction IntroductionWires This reference guide provides the basic criteria for preparing and terminating wires and cables used in wire harness assemblies as defined in the IPC/WHMA-A-620.
    [Show full text]
  • OK INDUSTRIES Wire Wrap Tools, Strippers & Accessories
    OK INDUSTRIES Wire Wrap Tools, Strippers & Accessories JIC WIRE STRIPPER AND CUTTER A B C D Features: • 6 ¾" and weight 4.5 ounces MOUSER Price Each Fig. Description STOCK NO. 1 5 801-JIC-1022 A Wire Stripper and Cutter 10-20AWG 9.10 8.65 801-JIC-1626 A Wire Stripper and Cutter 16-26AWG 9.10 8.65 801-JIC-2030 A Wire Stripper and Cutter 20-30AWG 9.10 8.65 UNIVERSAL CABLE STRIPPING TOOL AND COAXIAL CABLE STRIPPER TOOL 801-UST-500 B Universal Stripping Tool (59/6) 13.25 13.25 801-UST-100 C Coax Stripping Tool RG59/6 and7/11 11.90 11.90 E F G H CABLE STRPPER AND KITS 801-CST-1900 D Round Cable Stripper 47.90 45.50 801-ND-631 E Hollow Shaft Nut Driver Kit 42.90 40.76 801-TK-400 F Splicer's Kit 26.25 24.94 KSW WIRE WRAPPING WIRE ROLLS FOR CUT/STRIP/WRAP APPLICATIONS • Low strip force KYNAR insulated wire for use with CSW bits and sleeves. Replace the blank in part number with: B for Blue, W for White, R for Red, Y for Yellow, BLK for Black. MOUSER OK Industries AWG Insulation 100' Spool 1000' Spool Fig. STOCK NO. Part No. Size Dia. (in.) 1 5 1 5 I J K L 801-KSW24___ KSW24__-0100 G 24 .030 25.72 24.72 - - 801-KSW26___ KSW26__-0100 G 26 .027 23.62 22.70 - - 801-KSW28___ KSW28__-0100 G 28 .0235 23.62 22.70 - - 801-KSW30___ KSW30__-0100 G 30 .0195 22.58 21.70 - - 801-KSW30___-1000 KSW30__1000 G 30 .0195 - - 85.08 79.44 KYNAR INSULATED, SILVER PLATED COPPER CONDUCTOR Replace the blank in part number with: B for Blue, W for White, R for Red, Y for Yellow.
    [Show full text]
  • Collin's Lab: Breadboards & Perfboards
    Collin's Lab: Breadboards & Perfboards Created by Collin Cunningham Last updated on 2018-08-22 03:41:55 PM UTC Guide Contents Guide Contents 2 Video 3 Transcript 4 Learn More 13 Breadboard 13 Perfboard 14 © Adafruit Industries https://learn.adafruit.com/collins-lab-breadboards-and-perfboards Page 2 of 14 Video A circuit can live in many forms – most of them being ‘board’ forms. Likely the two most important for DIYers are the easily-modifiable breadboard and resilient yet still versatile perfboard. Taking a design from schematic to breadboard, and subsequently perfboard, is a vital process to the electronics maker – learn it, live it, love it! © Adafruit Industries https://learn.adafruit.com/collins-lab-breadboards-and-perfboards Page 3 of 14 Transcript Circuit schematics are very nice things … all these components floating in a lovely two-dimensional world with ideal placement & perfect connections … a nice idea. But eventually … we have to make them real. And in reality, a circuit usually exists on some type of circuit board - like say, a breadboard for example. Breadboards offer the most flexible way to assemble a circuit - build it, change it, scrap it, start over - all good, breadboard don’t mind at all. And that’s because it doesn’t require any soldering. © Adafruit Industries https://learn.adafruit.com/collins-lab-breadboards-and-perfboards Page 4 of 14 Beneath all those holes, a breadboard houses an army of springy metal clips which hold component leads in place while providing electrical connections between them. … though you may want to avoid taking one apart. When we place a component on a breadboard, we’re essentially wiring it into one of those internally connected rows.
    [Show full text]
  • The Technology of Wire Wrapping
    THE TECHNOLOGY OF WIRE WRAPPING A wire wrapped connection is made by coiling the wire around the sharp corners of a terminal under mechanical tension. This method of connection was developed by Bell Telephone Laboratories, Western Electric Company. Five Steps To Make A Regular Modified Wire Size Chart Wire Wrap Connection Bare Wire Dia. AWG SWG (USA) (GB) 1 In. mm .0403 1.022 18 .040 1.016 19 .036 0.914 19 20 2 .032 0.813 20 21 A “Regular” bit wraps the bare wire around the .028 0.711 21 22 terminal. A “Modified” bit wraps a portion of .0253 0.643 22 insulation around the terminal in addition to the .024 0.61 23 bare wire. This greatly increases the ability to 3 withstand vibration. .0226 0.574 23 .022 0.559 24 A distinct advantage of wire wrapping is the .0201 0.51 24 ease with which a wire may be removed from .020 0.508 25 4 a terminal to correct errors or modify wiring. .018 0.457 26 An unwrap tool is slipped over the terminal, .0179 0.455 25 engaging the first turn of the connection. .0164 0.417 27 5 Rotating the tool, the connection is removed in .0159 0.404 26 seconds, without damage to the terminal. .0148 0.376 28 .0142 0.361 27 There is a constant surveillance of manufacturing .0136 0.345 29 dimensions. Each wrapping bit is subjected to a “Strip” Force Chart* .0126 0.320 28 series of “Qualification Tests”. These consist of Minimun .0124 0.315 30 Wire Size Minimum wrapping groups of wire on various types of Number Strip Force terminals.
    [Show full text]
  • Wire Wrap Tool Kits
    WIRE WRAPPING TOOLS & ACCESSORIES • Wire Wrapping Guns ................................................................................. 4-6 • Bits and Sleeves........................................................................................ 7-9 • Hand Wrapping and Unwrapping Tools ................................................. 10-12 • Semi-Automatic Wire Wrapping Systems................................................... 13 • Wire ............................................................................................................ 14 • Wire Wrap Tool Kits .................................................................................... 16 • Wire Strippers........................................................................................ 18-19 FIBER OPTIC & CABLE TOOLS • Patch Cords / Connectors .......................................................................... 20 • Cleaning ..................................................................................................... 21 • Cleavers ..................................................................................................... 22 • Cutting Shears ........................................................................................... 23 • Cable Strippers ..................................................................................... 24-25 • Cable Reel & Reel Saver ........................................................................... 26 • Heavy Duty Utility Knives ..........................................................................
    [Show full text]
  • Wire Wrapped Joints Review P
    Electrocomponent Science and Technology Gordon and Breach Science Publishers Ltd. 1974, Vol. 1, pp. 17-25 Printed in Great Britain WIRE WRAPPED JOINTS REVIEW P. M. A. SOLLARS "[he Plessey Company Limited, Allen Clark Research Centre, Northants, U.K. (Received October 27, 1973; in final form December 6, 1973) The basic technique of wire wrapping is now well established as a simple and reliable method for joining conductor wires in a permanent, though easily replaceable, manner to more massive terminals. This paper describes the mechanical and the metallurgical basis of the joining technique and outlines the advantages. The scope of the technique as it has developed up to the present day is discussed in terms of the ranges of wrapping terminals and wrapping wires used and the types of wrapped joint that have been evolved. Finally the tools available for wire wrapping are briefly reviewed with particular emphasis on the wrapping bit. THE MECHANICAL BASIS OF THE WRAPPED at various temperatures. Extrapolation techniques can JOINT be used to predict the long term stress relaxation behaviour at room temperature using results obtained The mechanical basis of the wire wrapped joint was by accelerating the process at elevated temperature. investigated very extensively by workers at Bell The elastic stress level in the joint is of importance Telephone Laboratories 20 years ago. Their very full since it indicates the pressure with which the wrap- analysis of the joining system is still considered to be ping wire and terminal are being pressed together to essentially correct. The work included photoelastic maintain electrical contact. observations on a wrapped joint model to investigate strain patterns produced by wrapping, and the study of stress relaxation as a function of time and tem- 2 THE METALLURGICAL BASIS OF THE perature.
    [Show full text]
  • CNI Product Catalogue
    Comtest Networks 171 MacFarlane Road Unit E Ottawa, ON K2E 6V4 Product Catalogue 07/23/2021 Comtest Networks Inc. (CNI) comtestnetworks.com [email protected] 1 Table of Contents Central Office/CEV/WIC ............................................................................................................................ 4 2112 Series ...................................................................................................................................................... 4 2811 Series ...................................................................................................................................................... 4 2812 Series ...................................................................................................................................................... 4 3000 Series ...................................................................................................................................................... 4 4000 Series ...................................................................................................................................................... 5 H192 Shelf Assembly ...................................................................................................................................... 5 5-Pin Protection Modules ................................................................................................................................ 5 Terminal Blocks ..............................................................................................................................................
    [Show full text]