DOCSLIB.ORG

Produce Woodworking Joints

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Produce Woodworking Joints Produce woodworking joints Reference : A/504/7868 Level : Level 1 Credit Value : 12 Guided Learning Hours : 108 Aim : The aim of this unit is to provide the learner with the knowledge and skills to be deemed trained to produce woodworking joints in relation to: - forming woodworking joints - selecting and marking out materials - selecting and using hand tools Learning Outcomes Assessment Criteria The Learner Will The Learner Can 1 Know how to prepare resources for producing woodworking 1.1 - State the potential hazards associated with producing joints. woodworking joints. - Hazards - How to prevent breaches in Health and Safety using risk assessment and safe systems of work or method statement. - Machinery, personal injury. - Damaging products, working with timber and timber based products including toxic dust and splinters. - PPE required for application of Hazardous Substances. - Relevant Health and Safety Documentation and legislation. - COSHH. 1.2 - State why working drawings are important when marking out. - Working drawings - interpretation, communication, measurements, tools required. 1.3 - Describe the health and safety risks involved when producing woodworking joints. - Risks - Working with timber and timber based products incuding toxic dust and splinters. - COSHH. 1.4 - State the personal protective equipment (PPE) requirements for producing woodworking joints. - PPE Ear defenders, ear plugs, dust masks, respirators, eye Page 1 of 7 nocn.org.uk [email protected] 0300 999 1177 protection, safety boots, gloves, barrier cream. PPE In relation to Collective and Personal measures: - collective protective measures - personal protective equipment (PPE) - respiratory protective equipment (RPE) 1.5 - List the uses of a range of woodworking hand tools used to produce woodworking joints. - Range Saws coping, tenon, panel, rip, pad, dovetail, crosscut and disposable saw. Chisels bevel edged, firmer, mortice. Planes shoulder, bullnose, rebate or plough planes, smoothing, jack. Marking and measuring rulers, tapes, gauges, squares, knives, scribers, box squares/ over squares. 1.6 - State how to identify and rectify faults on woodworking hand tools. - Identify and rectify faults including: - chisels, mallets, handsaws, hammers, planes, wood-boring tools, squares, screwdrivers, gauges and measures. - typical faults and their consequences. 1.7 - State the importance of reporting and recording faulty or defective equipment. - Importance including: - consequences and procedures. - Legislation - RIDDOR. 1.8 - List the resources used to mark out timber to produce woodworking joints. Page 2 of 7 nocn.org.uk [email protected] 0300 999 1177 - Resources Timber including: Timber manufactured boards, hardwoods and softwoods. Marking and measuring Rulers, tapes, gauges, squares, knives, scribers, box squares/ over squares. 1.9 - State the checks that can be used to ensure the accuracy of marking out tools. 2 Be able to prepare resources to produce woodworking joints. 2.1 - Produce full size and scale drawings of the products being produced. - Produce could include: Housing, mortise and tenon, lengthening, bridle, halving, dovetail, angled, butt and edge. 2.2 - Select and use appropriate personal protective equipment (PPE) when producing woodworking joints. - PPE Ear defenders, ear plugs, dust masks, respirators, eye protection, safety boots, gloves, barrier cream. PPE In relation to Collective and Personal measures: - collective protective measures - personal protective equipment (PPE) - respiratory protective equipment (RPE) 2.3 - Select appropriate hand tools and equipment for producing woodworking joints. - Hand tools and equipment including: Saws coping, tenon, panel, rip, pad, dovetail, crosscut and disposable saw. Chisels Page 3 of 7 nocn.org.uk [email protected] 0300 999 1177 bevel edged, firmer, mortice. Planes shoulder, bullnose, rebate or plough planes, smoothing, jack. Marking and measuring rulers, tapes, gauges, squares, knives, scribers, box squares/ over squares. 2.4 - Check condition of tools and equipment prior to use. 2.5 - Use working drawings to calculate the quantity of materials required for producing woodworking joints. - Working drawings including: cutting lists. 2.6 - Select timber materials in accordance with the given specification to produce woodworking joints. - Timber materials including: Softwood (European redwood, whitewood). 3 Know woodworking materials and their storage requirements. 3.1 - State the different methods used for timber conversion. - Methods Through and through, quarter sawn, rough cut, planed all round. 3.2 - State the different methods used for seasoning timber. - Methods Air dried, kiln dried. 3.3 - State the different methods for storing woodworking materials securely and safely. - Methods Timber Softwood (European redwood and whitewood) Storage Page 4 of 7 nocn.org.uk [email protected] 0300 999 1177 - correct methods for storing securely. - under cover, away from elements e.g. weathering, moisture content. - shelving, racking, stacking. 3.4 - Describe the importance and necessity of using the correct materials for the task. - Importance - softwood (European redwood and whitewood). - timber manufactured boards (chipboard, plywood, Medium density fibreboard (MDF), blockboard). Necessity - Different grades of timber, abbreviations of materials including colours associated with e.g. MR, WBP, fire resistant materials. 3.5 - State the properties of a range of timbers. - Properties Hardwood and softwood including: Workability, durability, cell structure, tree growth, stress grading, origin of timber and sustainability, common sizes, sawn, planed. 3.6 - List the common defects found in timber. - Defects Splits in timber, waney edge, fungal attack, damage caused in transit, knots and shakes, resin pockets, defects occurring during manufacture. 4 Know how to produce woodworking joints. 4.1 - List a range of woodworking joints. - Range including: Housing, mortise and tenon, lengthening, bridle, halving, dovetail, angled, butt and edge. 4.2 - State a range of uses for woodworking joints. - Page 5 of 7 nocn.org.uk [email protected] 0300 999 1177 Uses including: Windows, door frames, length jointing timber, roof framing, doors, widening timber, cupboards and cupboard framing. 4.3 - State the methods of holding and supporting the task. - Methods Work bench, vice, clamps, frames, jigs, bench hooks. 4.4 - State the properties of a range of adhesives used when forming basic woodworking joints. - Adhesives including: Glues, resins, PVA. Properties including: Strength, flexibility, bonding. 5 Be able to produce woodworking joints. 5.1 - Use working drawings when marking out to produce woodworking joints. - Marking out Interpretation, communication, measurements, tools required. 5.2 - Use a variety of holding devices to secure and assemble the work. - Holding devices including: Work bench, vice, clamps, frames, jigs, bench hooks. 5.3 - Use hand tools to form frames to the given specification using a range of woodworking joints. - Form frames including: Housing, mortise and tenon, lengthening, bridle, halving, dovetail, angled, butt and edge. 5.4 - Dispose of waste in accordance with given procedures. - Page 6 of 7 nocn.org.uk [email protected] 0300 999 1177 Dispose of waste - Return to storage for re-use - Recycling - General waste. Legislation including: Waste management regulations and COSHH. Assessment guidance and/or requirements : This unit will be achieved in accordance with the additional guidance requirements as set out by the Awarding Organisation. Page 7 of 7 nocn.org.uk [email protected] 0300 999 1177.
Load more

Recommended publications
  • Product Data
    PRODUCT DATA Date: 20 March 2005 Information Sheet No.: ZE0197 EVO-STIK WOOD ADHESIVE WEATHERPROOF CROSSLINKING PVA ADHESIVE Evo-Stik Wood Adhesive Weatherproof is a one part water-resistant synthetic resin emulsion adhesive for general bonding of wood assemblies for non-structural applications. It has suitable properties for internal use and for protected external use. Evo-Stik Wood Adhesive Weatherproof is non-flammable, freeze/thaw stable, dries translucent, and meets EN 204 D3 & BS 4071: 1966 that the wet adhesive is carried into the socket MATERIALS BONDED/APPLICATIONS when assembly takes place. Wood which has Evo-Stik Wood Adhesive Weatherproof may be been stored in a cold or humid environment used for the assembly of frames for doors, should be allowed to condition in the workshop windows, drawers, etc. It is suitable for making atmosphere before bonding. mortice and tenon, dowelled, and other standard woodworking joints. It is also suitable for bonding 3. Assemble the parts while the adhesive wood veneers and laminated plastics to wood or film is still wet. The maximum open assembly chipboard cores. time depends on the substrate porosity and ambient temperature, but generally falls within Evo-Stik Wood Adhesive Weatherproof may also the range of 10 to 25 minutes. be used for bonding other materials such as rigid PVC or aluminium edge trim sections to 4. When the parts have been assembled, recessed wood for internal use. maintain light pressure on the bond line during the initial setting period, using equipment such as NOTE: It is unsuitable for assemblies vices, jigs, clamps. Dead loads may be used but continuously immersed in water, and applications are less efficient that clamping devices.
    [Show full text]
  • Learner Support Material: Civil Technology Woodworking: Grade 11
    EC - LEARNER SUPPORT MATERIAL: CIVIL TECHNOLOGY WOODWORKING: GRADE 11 CONTENT TO BE COVERED: TOPICS: 1. JOINING (Generic) + (SPECIFIC) Identify and explain the use of: • Bolts and nuts • Rawl bolts • Plastic plugs • Rawl plugs Methods of joining the following items: Alternate methods of fixing window panes onto casement members and fixed frames. Application, uses and drawings of the following woodworking joints (exploded and assembled views): • Haunched mortise and tenon joint • Twin mortice and tenon joint • Double bare face tenon 2. CASEMENT (Specific) Sketch of vertical section through the transom, bottom rail of fanlight and top rail of casement with glass and putty in position Identification of parts and the drawing of the external elevation of a double casement with fanlights and two horizontal glazing bars in the casement within a frame 3. DOORS(Specific) External doors: Application, drawing of front elevations, horizontal and vertical sections and constructional details of the following doors: • Three panel door with raised and fielded panels with high lock rail • Four panel door with low lock rail, raised panels and diminishing stile • Framed ledge, brace batten doors with lock and bottom rails 22 mm thick Application, drawing of front elevations, horizontal and vertical sections and constructional details of an entrance door with a shaped top rail and fixed sidelights within a frame. Sketches showing differentiation between a door frame and jamb lining 4. WALL PANELLING AND CUPBOARDS (Specific) a) Front elevation and vertical section showing methods of installing strip boards (tongue and groove boards) as wall panelling from floor to ceiling. b) A horizontal section showing how the joint between two strip boards are joined.
    [Show full text]
  • Carpentry, Culinary Arts Instructor Guide and Curriculums. Bilingual Vocational Education Program
    DOCUMENT RESUME ED 288 104 CE 049 167 AUTHOR Densmore, Roxanne T. TITLE Carpentry, Culinary Arts Instructor Guide and Curriculums. Bilingual Vocational Education Program. INSTITUTION Crownpoint Inst. of Technology, NM. SPONS AGENCY Office of Vocational and Adult Education (ED), Washington, DC. PUB DATE 87 GRANT G008620033 NOTE 369p. PUB TYPE Guides Classroom Use Guides (For Teachers) (052) EDRS PRICE MF01/PC15 Plus Postage. DESCRIPTORS *American Indian Education; Behavioral Objectives; *Bilingual Education; *Carpentry; Competency Based Education; *Cooking Instruction; Language Skills; Learning Activities; Lesson Plans; Mathematics Skills; Occupational Home Economics; Student Evaluation; Student Placement; Trade and Industrial Education; *Vocational English (Second Language) IDENTIFIERS *Navajo (Nation) ABSTRACT This guide is intended to assist vocational English as a second language (VESL) instructors in teaching courses in carpentry and the culinary arts to residents of Navajo reservations. The first section outlines the rationale and content of the two training programs as well as the basic VESL objectives that they seek to address. The next section, a VESL learning guide, discusses the main principles of the ESL method, learning characteristics of ESL students, the ESL learning environment, curriculum development, teaching techniques (including survival and competency-based methods, the notional-functional approach, use of the world outside the classroom, and total physical response), student assessment, and placement levels. Educational goals and curriculum design are covered next. The carpentry curriculum includes 25 units that are intended to provide students with hands-on and classroom instruction in the identification, proper handling, care, and maintenance of trade tools and equipment; the fundamental processes and techniques of the carpentry trade; applicable codes and safety practices; and blueprint reading and job estimation techniques.
    [Show full text]
  • L1 Diploma in Carpentry & Joinery
    NOTES FOR GUIDANCE Level 1 Diploma in Carpentry and Joinery (DIP056) Notes for guidance content provides the range of subject material for the programme of learning and specifies the skills, knowledge and understanding required for achievement of the unit. 2 Contents 1 Introduction 4 2 Units: CSA-L1Core01 Health, safety and welfare in construction and associated industries. 5 CSA-L1Core02 Knowledge of technical information, quantities and communication with others. 17 CSA-L1Core03 Knowledge of construction technology. 19 CSA-L1Occ09 Produce woodworking joints. 22 CSA-L1Occ10 Maintain and use carpentry and joinery hand tools. 27 CSA-L1Occ11 Prepare and use carpentry and joinery portable power tools. 32 3 Additional information 36 4 Glossary of Terms 37 3 Introduction Introduction This document contains all of the information required for the delivery of the level 1 and level 2 core units that support a number of Cskills Awards training qualifications. The unit content identifies the breadth and knowledge, and understanding needed to design and deliver a programme of learning to achieve each of the learning outcomes and assessment criteria. The learning outcomes set out what a learner is expected to know, understand or be able to do as the result of a process of learning. The assessment criteria specify the standard a learner is expected to meet to demonstrate that a learning outcome, or set of learning outcomes, has been achieved. The Notes for Guidance content provides further subject material for the programme of learning on what areas within the assessment criteria must be covered in the delivery of the unit. Additional Information This is informed by the underpinning knowledge and understanding requirements of the related NOS, where relevant.
    [Show full text]
  • Digital Fabrication: Joints
    DIGITAL FABRICATION: JOINTS ELEANOR MCKENNA GRANT SASO FELIPE LOPERA OMAYRA DIAZ Traditional Woodworking Joints by Hayes Shanesy JOINT FORMS BASIC PRINCIPALS: Encyclopedia of wood joints - Not developed for a particular function - No evident of joint preference in construction - Adapted in response to change and demand JOINT FORMS - Lap joints and mortise and tenon became more complex over time JOINT FORMS JAPANESE JOINERY: - Use of Splicing JOINT FORMS SOUTHERN EUROPE: - Angled Joints JOINT FORMS HUMAN HAND Joints were tested - clasping - grasping - interlocking - Evolution of joints through Tools JOINT FORMS CHARACTERISTICS - Strength, flexibility, toughness, appearance, etc. - Derive from the properties of the joining materials - How they are used JOINT FORMS: SPLICING Table Splayed Joint Gerber Joint Wedge Locking Joint Dovetail Joints Gooseneck Joint JOINT FORMS: COUNTER Mortise and Tenon Joint Bridle Joint Box/ Finger Joint Blind Corner Lap Tongue Joint JOINT FORMS: EDGE TO EDGE Rabbeted & Grooved Lap Joint Tongue and Dado Joint Spline Insert Butterfly Key JOINT FORMS: TRADITIONAL vs DIGITAL JOINT FORMS: DIGITAL Jochen Gros’s 50 Digital Wood Joints project Jochen Gros’s 50 Digital Wood Joints project Jochen Gros’s 50 Digital Wood Joints project Jochen Gros’s 50 Digital Wood Joints project JOINT LOGIC: DIGITAL Jochen Gros’s 50 Digital Wood Joints project CNC MILL BASICS - Allows for perfect joints to be fashioned in substantially less time - Somewhat difficult to master, but provides endless opportunities - Requires whole new skill
    [Show full text]
  • Woodworking Joints.Key
    Woodworking making joints Using Joints Basic Butt Joint The butt joint is the most basic woodworking joint. Commonly used when framing walls in conventional, stick-framed homes, this joint relies on mechanical fasteners to hold the two pieces of stock in place. Learn how to build a proper butt joint, and when to use it on your woodworking projects. Basic Butt Joint The simplest of joints is a butt joint - so called because one piece of stock is butted up against another, then fixed in place, most commonly with nails or screws. The addition of glue will add some strength, but the joint relies primarily upon its mechanical fixings. ! These joints can be used in making simple boxes or frames, providing that there will not be too much stress on the joint, or that the materials used will take nails or screws reliably. Butt joints are probably strongest when fixed using glued dowels. Mitered Butt Joint ! A mitered butt joint is basically the same as a basic butt joint, except that the two boards are joined at an angle (instead of square to one another). The advantage is that the mitered butt joint will not show any end grain, and as such is a bit more aesthetically pleasing. Learn how to create a clean mitered butt joint. Mitered Butt Joint The simplest joint that requires any form of cutting is a miter joint - in effect this is an angled butt joint, usually relying on glue alone to construct it. It requires accurate 45° cutting, however, if the perfect 90° corner is to result.
    [Show full text]
  • Digital Joinery for Hybrid Carpentry
    Digital Joinery For Hybrid Carpentry Shiran Magrisso1 Moran Mizrahi2 Amit Zoran12 [email protected] [email protected] [email protected] Bezalel Academy of Arts and Design, Jerusalem 1 & The Hebrew University of Jerusalem2, Israel Figure 1 Digital Joinery and five development stages of a hybrid stool. (A) An early sketch of a stool design relying on Digital Joinery; (B) using the Generative Joinery Design Tool, the software generates digital joints; (C) a rendering of a complete stool with digital joints; (D) a 3D-printed (by selective laser sintering) Nylon-12 joint with its anchors; (D) a closeup photograph of a dyed and assembled Voronoi diagram skeleton joint, connecting four wooden beams; (E) a photograph of the finished stool (by Daniel Shechter). ABSTRACT INTRODUCTION The craft of carpentry relies on joinery: the connections Good joinery... is difficult to design and even more difficult between pieces of wood to create multipart structures. In to execute. It should be thought of as an investment, an traditional woodworking, joints are limited to the manual unseen morality. chisel skills of the craftsperson, or to capabilities of the George Nakashima [22] machines, which favorite 90° or 180° angle joints with no more than two elements. We contribute an interactive The craft of designing and implementing wood joints has a design process in which joints are generated digitally to long-standing and important role in all traditional allow for unrestricted beam connectors, then produced from woodworking practices [22,23,28]. Joints are the elements Nylon-12 using selective laser sintering (SLS) 3D printing. that transform lumber into a practical artifact.
    [Show full text]
  • Introduction to Carpentry Tools and Joints
    INTRODUCTION TO CARPENTRY TOOLS 1. Try Square 2. Steel Rule 3. Marking Guage 4. Coping Saw 5. Tenon Saw 6. Penon Saw 7. Ironjack Plane 8. Benchwise 1. Try Square This is used to mark lines at 90 degrees to a straight edge. It is used to mark out lines square to the face edge and face side. It may also be used to check if edges are straight. If the try square is placed on the edge of the material and held up to a light, any light shining through between the material and the try square blade indicates that the edge of the material is not straight. 2. Steel Rule A steel rule is a very accurate marking and measuring tool. The steel is thin and the markings on the rule are very fine. The measurements are in millimetres on one edge and inches on the other. The steel rule can also be used as a straight edge to check if materials or edges of materials are straight. The measurements on the steel rule go all the way to the end unlike the plastic ruler. This is because the rule may be used to measure inside pipes. It may also be used to measure diameters and circumferences of pipes and tubes accurately. The end of the rule with the measurements to the edge is called the zero end. By: Harish Gupta Page 1 3. Marking Guage The marking gauge is used on wood.It is used to mark straight lines parallel to a straight edge.The marking tool has an adjustable stock (the stock slides up and down the stem) and is set using a steel rule.
    [Show full text]
  • Digital Fabrication Strategies for Timber Thin-Walled Sections
    This paper is part of the Proceedings of the 2nd International Conference on High Performance and Optimum Design of Structures and Materials (HPSM 2016) www.witconferences.com Digital fabrication strategies for timber thin-walled sections Y. Al-Qaryouti, J. M. Gattas, R. Shi & L. McCann School of Civil Engineering, University of Queensland, Australia Abstract A rise in digital fabrication technologies has led to numerous recent advances in the design and manufacture of woodworking joints. Computational generative processes can be used to create a part with integral mechanical attachments for friction-fit, adhesion-less connections between parts. These processes can additionally create machine code for production of such parts on computer- numerically controlled (CNC) cutters. This paper investigates such computational processes for digital design and manufacture of timber thin-walled structural sections. Assembly procedures are first presented for rectangular hollow sections and I-sections, with a series of timber prototypes produced to demonstrate their CNC production. An experimental analysis on square hollow sections under uniaxial compressive loading is then conducted. Tight fit digitally-fabricated sections are seen to possess a structural capacity approaching that of the glued sections. Prototypes with different assembly tolerances and grain directions produce a range of novel failure modes and give insight into potential failure paths of digitally-fabricated timber sections. Keywords: digital fabrication, timber engineering, thin-walled sections. 1 Introduction 1.1 Digital Fabrication The Digital Age is transforming how we design, build, and produce structures [1] with digital modelling and fabrication tools now available that provide a degree of flexibility and coordination never previously available [2].
    [Show full text]
  • Making Stub-Tenon Doors
    Making Stub-tenon Doors The stub-tenon joint will never be the super- hero of your joinery arsenal because it doesnʼt have the stuff necessary to be a strong joint. The mating parts are short (hence the “stub” moniker) and itʼs housed on only two sides: the face cheeks of the tenon. There is sufficient glue surface, but the cross-grain orientation compromises the glue joint. In the pantheon of woodworking joints, the stub-tenon joint may be more accurately described as a 90-pound weakling. But even so, this can be sufficient for smaller, lightweight doors that donʼt take a lot of abuse. For example, you wouldnʼt choose this joint for kitchen cabinet doors or built-ins for the kidsʼ playroom. But itʼs OK to use a stub-tenon door for a vanity cabinet or for a project thatʼs built as much for looks as it is for service. Once a door weighs more than four or five pounds, or is larger than 18" x 24", you must abandon the stub-tenon joint for a more substantial one. Mortise-and-tenon construction, dowels, loose tenons and even biscuit joints are superior choices for larger, heavier doors. So why use a stub-tenon joint? Well, itʼs easy to make because it requires a minimal amount of setup time regardless of the method you choose to cut the joint. Itʼs usually cut with a router in a table or on the table saw using a stack dado set. The ease of setup is because the same groove thatʼs cut to receive the panel doubles as the groove for the stub tenon.
    [Show full text]
  • Lap Joint Worksheet.Indd
    Lap joint worksheet Lap joints for timber This worksheet is about lap joints for joining pieces of timber. It tells you the good and bad points about these joints and how you can make them. These joints are sometimes called halving joints. What you will learn When you have fi nished this worksheet, you should be able to: ❏ Make lap joints correctly. ❏ Fix lap joints correctly. Things you need before you start Materials You will need scrap timber and some nails to work with. ❏ Tools or equipment Measuring and marking tools ❏ A saw, chisel and hammer ❏ Fixings (nails, screws) ❏ 1 Copyright © Commonwealth of Learning Lap joint worksheet What is a lap joint? Lap or halving joints are used for joining pieces of timber. • It needs special cuts in the timber • The joint is fi xed with nails or screws The two pieces of timber are cut so that they fi t together at different angles. Usually half the timber thickness is cut away. That is why it can be called a ʻhalvingʼ joint. Here are some examples Straight Angle-halved Tee-halved 2 Copyright © Commonwealth of Learning Lap joint worksheet What is a lap joint used for? It is used for such things as • joining long lengths of timber in a frame • corner joints • crossing one length of timber over another. Here are some examples The close fi t of the pieces helps to give it strength The joint is neat and fl at, but the fi xings usually show. 3 Copyright © Commonwealth of Learning Lap joint worksheet Activity Find some lap or halving joints used around where you live.
    [Show full text]
  • Woodworking Magazine, Spring 2004
    Premiere Issue: Committed to Finding the Better Way to Build Things Filled With Good Craftsmanship, the Best Techniques and No Ads OODWORKIN W MAGAZINE G Shaker Hanging Cabinet Two Better Ways to Cut Accurate Rabbets Stub Tenons: The Secret to Simple, Good-looking Doors Wipe-on Finishes – What You Must Know To Get Good Results Why Most 6" Rulers Don’t Measure Up Simple Cabinet Organizes Your Most-used Tools POPULAR WOODWORKING $4.99 U.S. $7.99 CAN 03> 71486 01355 06 SPRING 2004 “By all means read what the experts have to say. Just don’t let it get in the way of your woodworking.” Contents — John Brown (1932 – ), Welsh stick chairmaker 1 On the Level 29 Glossary “Listen to Your Lumber” – Your wood shouts, Woodworking can be overwhelming at first. whispers and murmurs. The careful craftsman Some terms from this issue are defined here. understands what these noises mean. 30 Understanding 2 Letters Wipe-on Finishes Questions, comments and wisdom from The simplest finish is a wipe-on finish. But wipe- readers, experts and our staff. on finishes either can be durable or worthless depending on what’s in the can. We clear up 5 Shortcuts the confusion. Plus: We test six popular brands Tricks and tips that will make your of varnish to find the best. woodworking simpler and more accurate. 32 End Grain 8 Cut Accurate and “Bad Treehouses & Good Medicine” – With Clean Rabbets MAKING STUB-TENON DOORS, PAGE 12 fond memories from his own childhood, a After trying every method we could imagine, father tries to build a treehouse with his son.
    [Show full text]