List for Confirmations and Withdrawals Approved by the 118Th Standards Approval Committee Meeting on 5Th April 2018

Total Page:16

File Type:pdf, Size:1020Kb

List for Confirmations and Withdrawals Approved by the 118Th Standards Approval Committee Meeting on 5Th April 2018 LIST FOR CONFIRMATIONS AND WITHDRAWALS APPROVED BY THE 118TH STANDARDS APPROVAL COMMITTEE MEETING ON 5TH APRIL 2018 CHEMICAL DEPARTMENT CONFIRMATIONS 1. KS ISO 618:1974 Kenya Standard — Paper — Articles of stationery that include detachable sheets — Overall trimmed sizes 2. KS 811:2013 Kenya Standard — Silk (sheen) emulsion paints for interior and exterior use — Specification 3. KS ISO 22414:2004 Kenya Standard — Paper — Cut-size office paper — Measurement of edge quality 4. KS ISO 15318:1999 Kenya Standard — Pulp, paper and board — Determination of 7 specified polychlorinated biphenyls (PCB) 5. KS ISO 15360-1:2000 Kenya Standard — Recycled pulps — Estimation of stickies and Plastics Part 1: Visual method. 6. KS ISO 23713:2005 Kenya Standard — Pulps — Determination of fibre coarseness by automated optical analysis - Polarized light method 7. KS ISO 353:1975 Kenya Standard — Processed writing paper and certain classes of printed matter - Method of expression of dimensions. 8. KS 2351:2012 Kenya Standard — Surgical spirit — Specification 9. KS 924:2012 Kenya Standard — Specification for motor vehicle chevrons, decals and strips 10. KS 2350:2012 Kenya Standard — Sodium silicate — Specification 11. KS 87:2012 Kenya Standard — Hydrochloric acid — Specification 12. KS 1180:2012 Kenya Standard — Ethyl methyl ketone(butanone for industrial use) — Specification WITHDRAWALS List of Kenya Standards for withdrawal in accordance with SQMT ACT with similar scope as endorsed EAS Standards on paints and allied products 13. KS 667:2013 Kenya Standard — Water-thinned priming paints for wood — Specification 14. KS 811:2013 Kenya Standard — Silk (sheen) emulsion paints for interior and exterior use — Specification 15. KS 813:2013 Kenya Standard — Matt solvent-borne paints for interior and exterior use — Specification 16. KS 812:2012 Kenya Standard — Matt emulsion paints for interior and exterior use — Specification 17. KS 1276:2012 Kenya Standard — Air-dried roofing paints — Specification 18. KS 1027-1:2012 Kenya Standard — Auto refinishing paints — Specification Part 1: Synthetic resin based 19. KS 1027-2:2012 Kenya Standard — Auto refinishing paints — Specification Part 2: Nitrocellulose resin based 20. KS 1718:2003 Kenya Standard — Thinner for nitrocellulose resin-based paints and lacquers — Specification 21. KS 1717:2003 Kenya Standard — Thinner for synthetic resin-based auto-refinishing paints — Specification 22. KS 1716:2012 Kenya Standard — 2-Pack acrylic resin-based auto-refinishing paint — Specification. 23. KS 1719:2003 Kenya Standard — Thinner for acrylic resin based auto-refinishing paint — Specification 24. KS ISO 15360-1:2000 Kenya Standard — Recycled pulps — Estimation of Stickies and Plastics Part 1: Visual method. Replaced by KS ISO 15360-1:2011 25. KS ISO 15360-2: 2001 Kenya Standard — Recycled pulps — Estimation of Stickies and Plastics Part 2: Image analysis method. / Paper and Paper Products Replaced by KS ISO 15360-2:2015 26. KS ISO 16065-1:2001 Kenya Standard — Pulps — Determination of fibre length by automated optical analysis — Part 1: Polarized light method. / Paper and paper product. Replaced by KS ISO 16065-1:2014 27. KS ISO 8784-1:2005 Kenya Standard — Pulp, paper and board — Microbiological examination Part 1: Total count of bacteria, yeast and mould based on disintegration. / Paper and Paper Products. Replaced by KS ISO 8784:2014. 28. KS ISO 5270:1998 Kenya Standard —Pulps — Laboratory sheets — Determination of physical properties Replaced by KS ISO 5770:2012 Page 1 of 11 LIST FOR CONFIRMATIONS AND WITHDRAWALS APPROVED BY THE 118TH STANDARDS APPROVAL COMMITTEE MEETING ON 5TH APRIL 2018 29. KS 2157-1:2009 Kenya Standard — Hot applied thermoplastic road marking paint — Specification Part 1: Constituent material and mixtures, To be replaced by KS 2157-1:2018 30. KS 2157-2:2009 Kenya Standard — Hot applied Thermoplastic Road Marking paint — Specification Part 2: Specification for road performance, To be replaced by KS 2157-2:2018 31. KS 421:2010 Kenya Standard — Newsprint — Specification, To be replaced by KS 421;2018 32. KS 921:1991 Kenya Standard — Specification for kraft liner, To be replaced by KS 921:2018 ELECTROTECHNICAL DEPARTMENT CONFIRMATIONS 33. KS 1075-3:1991 Kenya Standard — Glossary of terms relating to fishing nets Part 3: Description and designation of knotted netting 34. KS 1076:1998 Kenya Standard — Specification for fishing nets 35. KS 1129-2:1992 Kenya Standard — Test methods for fishing nets Part 2: Determination of breaking load of knot and netting yarn 36. KS 1129-3:1995 Kenya Standard —Test methods for fishing nets Part 3: Determination of elongation of netting yarns 37. KS 1129-5:1997 Kenya Standard — Test methods for fishing nets Part 5: Determination of mesh breaking load of netting 38. KS 1630-1:2002 Kenya Standard — Methods of test for knitted fabrics Part 1: Method for determination of dimensions and dimensional stability of knitted fabrics 39. KS 207-2:1996 Kenya Standard — Glossary of textile terms pertaining to defects in fabrics Part 2: Knitted fabrics 40. KS 438:1985 Kenya Standard — Method for determination of pilling resistance of fabrics (brush pilling tester) 41. KS 493:1983 Kenya Standard — Specification for knitted nylon fabric 42. KS 494:1983 Kenya Standard — Specification for knitted vests 43. KS 495:1983 Kenya Standard — Specification for gent's knitted briefs 44. KS 525:1984 Kenya Standard — Specification for ladies knitted briefs 45. KS 632:1988 Methods for determination of dimensional changes of knitted products containing wool 46. KS 781-1:1988 Kenya Standard — Specification for cones Part 1: Paper cones 47. KS 781-2:1989 Kenya Standard — Specification for cones Part 2: Plastic cones 48. KS ISO 13938-1:1999 Textiles — Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension 49. KS ISO 13938-2:1999 Kenya Standard — Textiles — Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension 50. KS ISO 23606:2009 Kenya Standard — Textiles Knitted fabrics — Representation and pattern design 51. KS 1113-1:1993 Kenya Standard — Specification for spun yarns Part 1: Cotton yarns 52. KS 1113-3:1993 Kenya Standard — Specification for spun yarns Part 3: Polyester / Cellulosic blended yarns 53. KS 1113-4:1996 Kenya Standard — Specification for staple spun yarns Part 4: Polyester/Wool blended yarns 54. KS 1120:1992 Kenya Standard — Specification for doubling and twisting bobbins 55. KS 1128:1995 Kenya Standard — Specification for wicks for non-pressure stoves 56. KS 1233:1992 Kenya Standard — Specification for spinning doubling and twisting rings 57. KS 529:1984 Kenya Standard — Specification for elastic flat braid 58. KS 665:1998 Kenya Standard — Specification for textile labels 59. KS 933:1990 Kenya Standard — Specification for tubes (bobbins) for ring spinning 60. KS 588: 1999 Kenya Standard — Specification for PVC slippers 61. KS IEC 60514:1975 Kenya Standard — Acceptance inspection of class 2 alternating-current watthour meters. 62. KS EAS 388-2:2005 Kenya Standard — High-voltage fuses Part 2: Expulsion fuses 63. KS 1187:1993 Kenya Standard — Specification for metallic clips for electrical wiring 64. KS 311-1:1987 Kenya Standard — Specification for miniature circuit breakers (MCB's) Page 2 of 11 LIST FOR CONFIRMATIONS AND WITHDRAWALS APPROVED BY THE 118TH STANDARDS APPROVAL COMMITTEE MEETING ON 5TH APRIL 2018 65. KS IEC 61643-1:2002 Kenya Standard — Surge protective devices connected to low-voltage power distribution systems Part 1: Performance requirements and testing methods 66. KS 1827:2007 Kenya Standard — Voltage characteristics of electricity supplied by public distribution systems 67. KS 311-1:1987 Kenya Standard — Specification for miniature circuit breakers (MCB's) 68. KS ISO 361:1975 Kenya Standard — Basic ionizing radiation symbol 69. KS ISO 14152:2001 Kenya Standard — Neutron radiation protection shielding — Design principles and considerations for the choice of appropriate materials 70. KS ISO 14146:2000 Kenya Standard — Radiation protection — Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation 71. KS ISO 8194:1987 Kenya Standard — Radiation protection — Clothing for protection against radioactive contamination – Design, selection, testing and use 72. KS OIML R 119:1996 Kenya Standard — Pipe provers for testing measuring systems for liquids other than water 73. KS 1950:2007 Kenya Standard — X-ray analysis equipment — Protection against ionizing radiation — Code of practice 74. KS 1988:2007 Kenya Standard — Safe use of radiation gauges — Code of practice 75. KS 1989:2006 Kenya Standard — Cabinet X-ray equipment for examination of letters packages, baggage, freight and other articles for security, quality control and other purposes ― Requirements 76. KS 1990:2007 Kenya Standard — Safe use of ionizing radiation in training institutions — Code of practice 77. KS 2032:2007 Kenya Standard — Near-surface disposal radioactive waste — Code of practice 78. KS 2029:2007 Kenya Standard — Corpses containing radioactive materials — Safe handling — Code of practice 79. KS 2030:2007 Kenya Standard — Discharge of patients undergoing treatment with radioactive substances — Code of practice 80. KS 1953:2007 Kenya Standard — Healthcare practitioners exposed to ionizing radiation — Code of practice. 81. KS 1954:2007 Kenya Standard — Medical research — Administration of ionizing radiation to human
Recommended publications
  • THE KENYA GAZETTE Published by Authority of the Republic of Kenya (Registered As a Newspaper at the G.P.O.)
    ~ I v , THE KENYA GAZETTE Published by Authority of the Republic of Kenya (Registered as a Newspaper at the G.P.O.) Vol. CXX—No. 99 NAIROBI, 17th August, 2018 Price Sh. 60 CONTENTS GAZETTE NOTICES GAZETTE NOTICE5—(Contd.) PAGE PAGE The Human Resource Management Professionals Act- I The Insolvency Act-Winding up Order and Creditors' Appointment....................................................................... 2906 2954-2955 The National Council for Law Reporting Act- The Political Parties Act-Change of Party Officials........... 2955 Appointment....................................................................... 2906 County Government Notices ................................................... 2906-2907,2953 The Physical Planning Act-Completion of Pail Development Plans, etc .................................................... 2955-2956 The Land Registration Act-issue of Provisional Certificates, etc ................................................................... 2907-2915 Disposal of Uncollected Goods .............................................. 2956 The National Treasury-Statement of Actual Revenues and Lossof Policies .......................................... ................................ 2956-2962 Net Exchequer Issues as at 31st July, 2018 ...................... 2915-2918 Change of Names ............................................................ The Civil Aviation Act-Decisions of the Kenya Civil 2962-2963 Aviation Authority on Applications for Air Service Licences ............................................................................
    [Show full text]
  • Evitalia NORMAS ISO En El Marco De La Complejidad
    No. 7 Revitalia NORMAS ISO en el marco de la complejidad ESTEQUIOMETRIA de las relaciones humanas FRACTALIDAD en los sistemas biológicos Dirección postal Calle 82 # 102 - 79 Bogotá - Colombia Revista Revitalia Publicación trimestral Contacto [email protected] Web http://revitalia.biogestion.com.co Volumen 2 / Número 7 / Noviembre-Enero de 2021 ISSN: 2711-4635 Editor líder: Juan Pablo Ramírez Galvis. Consultor en Biogestión, NBIC y Gerencia Ambiental/de la Calidad. Globuss Biogestión [email protected] ORCID: 0000-0002-1947-5589 Par evaluador: Jhon Eyber Pazos Alonso Experto en nanotecnología, biosensores y caracterización por AFM. Universidad Central / Clúster NBIC [email protected] ORCID: 0000-0002-5608-1597 Contenido en este número Editorial p. 3 Estequiometría de las relaciones humanas pp. 5-13 Catálogo de las normas ISO en el marco de la complejidad pp. 15-28 Fractalidad en los sistemas biológicos pp. 30-37 Licencia Creative Commons CC BY-NC-ND 4.0 2 Editorial: “En armonía con lo ancestral” Juan Pablo Ramírez Galvis. Consultor en Biogestión, NBIC y Gerencia Ambiental/de la Calidad. [email protected] ORCID: 0000-0002-1947-5589 La dicotomía entre ciencia y religión proviene de la edad media, en la cual, los aspectos espirituales no podían explicarse desde el método científico, y a su vez, la matematización mecánica del universo era el único argumento que convencía a los investigadores. Sin embargo, más atrás en la línea del tiempo, los egipcios, sumerios, chinos, etc., unificaban las teorías metafísicas con las ciencias básicas para dar cuenta de los fenómenos en todas las escalas desde lo micro hasta lo macro.
    [Show full text]
  • Deliverable 3.5.1 Initial Report on Spatial Data Quality As- Sessment
    Collaborative Project GeoKnow - Making the Web an Exploratory for Geospatial Knowledge Project Number: 318159 Start Date of Project: 2012/12/01 Duration: 36 months Deliverable 3.5.1 Initial Report On Spatial Data Quality As- sessment Dissemination Level Public Due Date of Deliverable Month 20, 30/07/2014 Actual Submission Date Month 20, 04/07/2014 Work Package WP3, Spatial knowledge aggregation, fusing and quality assessment Task T3.5 Type Report Approval Status Final Version 1.0 Number of Pages 26 Filename D3.5.1_Initial_Report_On_Spatial_Data_Quality _Assessment.pdf Abstract: This deliverable provides a survey of the metrics used for measuring Spatial Data Quality and the initial results of the CROCUS, a semi-automatic tool developed to measure Data Quality in the context of GeoKnow. The information in this document reflects only the author’s views and the European Community is not liable for any use that may be made of the information contained therein. The information in this document is provided ”as is” without guarantee or warranty of any kind, express or implied, including but not limited to the fitness of the information for a particular purpose. The user thereof uses the information at his/ her sole risk and liability. Project funded by the European Commission within the Seventh Framework Programme (2007 - 2013) D3.5.1 - v. 1.0 .................................................................................................... History Version Date Reason Revised by 0.0 07/07/2014 First draft created Muhammad Saleem 0.1 15/07/2014
    [Show full text]
  • GSS Initiative Data Quality ACCEPTED.Pdf
    REPORT OVERVIEW In the Fall of 2010, the Bureau of the Census, Geography Division contracted with independent subject matter experts David Cowen, Ph.D., Michael Dobson, Ph.D., and Stephen Guptill, Ph.D. to research five topics relevant to planning for its proposed Geographic Support System (GSS) Initiative; an integrated program of improved address coverage, continual spatial feature updates, and enhanced quality assessment and measurement. One report frequently references others in an effort to avoid duplication. Taken together, the reports provide a more complete body of knowledge. The five reports are: 1. Reporting on the Use of Handheld Computers and the Display/Capture of Geospatial Data 2. Measuring Data Quality 3. Reporting the State and Anticipated Future Directions of Addresses and Addressing 4. Identifying the Current State and Anticipated Future Direction of Potentially Useful Developing Technologies 5. Researching Address and Spatial Data Digital Exchange and Data Integration The reports cite information provided by Geography Division staff at “The GSS Initiative Offsite, January 19-21, 2010.” The GSS Initiative Offsite was attended by senior Geography Division staff (Division Chief, Assistant Division Chiefs, & Branch Chiefs) to prepare for the GSS Initiative through sharing information on current procedures, discussing Initiative goals, and identifying Initiative priority areas. Materials from the Offsite remain unpublished and are not available for dissemination. The views expressed in these reports are the personal views of the authors and do not reflect the views of the Department of Commerce or the Bureau of the Census. Department of Commerce Bureau of the Census Geography Division Measuring Data Quality December 29, 2010 Task 5: Measuring Data Quality A Report to the Geography Division, U.S.
    [Show full text]
  • Database Globalization Support Guide
    Oracle® Database Database Globalization Support Guide 19c E96349-05 May 2021 Oracle Database Database Globalization Support Guide, 19c E96349-05 Copyright © 2007, 2021, Oracle and/or its affiliates. Primary Author: Rajesh Bhatiya Contributors: Dan Chiba, Winson Chu, Claire Ho, Gary Hua, Simon Law, Geoff Lee, Peter Linsley, Qianrong Ma, Keni Matsuda, Meghna Mehta, Valarie Moore, Cathy Shea, Shige Takeda, Linus Tanaka, Makoto Tozawa, Barry Trute, Ying Wu, Peter Wallack, Chao Wang, Huaqing Wang, Sergiusz Wolicki, Simon Wong, Michael Yau, Jianping Yang, Qin Yu, Tim Yu, Weiran Zhang, Yan Zhu This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable: U.S. GOVERNMENT END USERS: Oracle programs (including any operating system, integrated software, any programs embedded, installed or activated on delivered hardware, and modifications of such programs) and Oracle computer documentation or other Oracle data delivered to or accessed by U.S.
    [Show full text]
  • Technical Solutions and Standards: How ISO Can Support A
    Technical solutions and standards How ISO can support a forum for global geographic information management Olaf Østensen, Chair of ISO/TC 211 Geographic information/geomatics The Conference, … Requests that, by 1 November 2010, the Secretary-General and the United Nations Secretariat initiate discussions and prepare a report, for a future session of the Economic and Social Council, on global coordination of geographic information management, including consideration of the possible creation of a United Nations global forum for the exchange of information between countries and other interested parties, and in particular for sharing best practices in legal and policy instruments, institutional management models, technical solutions and standards, interoperability of systems and data, and sharing mechanisms that guarantee easy and timely accessibility of geographic information and services. Resolution VII: Global geographic information management, Eighteenth United Nations Regional Cartographic Conference for Asia and the Pacific ISO/TC 211 was established in 1994 and has currently published nearly 40 standards and other deliverables within the field of geographic information and geomatics. Another set of around 20 is under development or revision. The work of the committee has provided a very solid state-of- the-art fundament for establishing, documenting, integrating, archiving, disseminating and interpreting geographic information. Unambiguous data description, including the semantic aspects, is of course essential for making assertions and reasoning about our environment. The ISO 19100-family of standards includes standards for describing data content and services to access the content. Metadata, i.e. data about data, has been a main focus to allow discovery of which data that actually exist, information allowing user communities to assess their fitness for use, and information on where to retrieve and possible conditions for the use of the data.
    [Show full text]
  • Download Complete 2016-17 Catalog
    2016-2017 ACADEMIC CATALOG Illinois Community College District No.518 www.sandburg.edu Main Campus Branch Campus 2400 Tom L. Wilson Blvd. 305 Sandburg Dr. Galesburg, IL 61401 Carthage, IL 62321 309.344.2518 217.357.2129 IT LAN & Security Specialist .......................................................... 73 Table of Contents Legal Office Assistant ..................................................................... 74 About Sandburg ....................................................................................... 2 Locomotive Electrical ...................................................................... 76 President's Message ............................................................................... 3 Locomotive Mechanical .................................................................. 77 Board of Trustees .................................................................................... 4 Magnetic Resonance Imaging (MRI) .............................................. 78 History ...................................................................................................... 5 Medical Office Professions ............................................................. 79 District Map .............................................................................................. 6 Medical Assisting ............................................................................ 81 Academic Calendar ................................................................................. 7 Mortuary Science ...........................................................................
    [Show full text]
  • Copy of SDD Work Program for 2019 for SMD.Xlsx
    BUREAU OF PROPOSED WORK PROGRAM FOR 2019 PHILIPPINE STANDARDS As of 21 January 2019 STAGES OF DEVELOPMENT 1. Preparatory INTERNATIONAL STATUS 2. Organization Meeting CLASSIFICATION FOR SUBJECT PROJECT REFERENCE [New/Revision (Amd./Cor.)/ 3. Drafting/Deliberation TECHNICAL COMMITTEE STANDARDS Reconfirmation] 4. Circulation (ICS) 5. Finalization 6. Approval BUILDING, CONSTRUCTION, MECHANICAL AND TRASPORTATION PRODUCTS Steel castings -- Magnetic particle inspection ISO 4986:2010 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings Steel castings -- Liquid penetrant inspection ISO 4987:2010 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings Steel castings -- Ultrasonic examination -- Part 1: Steel castings ISO 4992-1:2006 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings for general purposes Steel castings -- Ultrasonic examination -- Part 2: Steel castings ISO 4992-2:2006 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings for highly stressed components Steel and iron castings -- Radiographic testing ISO 4993:2015 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings Metallic materials -- Tensile testing -- Part 2: Method of test at ISO 6892-2:2018 New Preparation 77.040.10 BPS/TC 33 Metal Castings elevated temperature Metallic materials -- Tensile testing -- Part 3: Method of test at ISO 6892-3:2015 New Preparation 77.040.10 BPS/TC 33 Metal Castings low temperature Metallic materials -- Tensile testing -- Part 4: Method of test in ISO 6892-4:2015 New Preparation 77.040.10 BPS/TC 33 Metal
    [Show full text]
  • Isoupdate July 2020
    ISO Update Supplement to ISOfocus July 2020 International Standards in process ISO/CD 6469-2 Electrically propelled road vehicles — Safety specifications — Part 2: Vehicle operational safety An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna- ISO/CD 6460-1 Motorcycles — Measurement method for gase- tional Standard takes the form of a committee draft (CD) - this is cir- ous exhaust emissions and fuel consumption culated for study within an ISO technical committee. When consensus — Part 1: General test requirements has been reached within the technical committee, the document is ISO/CD TS Road vehicles — Ergonomic aspects of trans- sent to the Central Secretariat for processing as a draft International 16951 port information and control systems (TICS) — Standard (DIS). The DIS requires approval by at least 75 % of the Procedures for determining priority of on-board member bodies casting a vote. A confirmation vote is subsequently messages presented to drivers carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. TC 23 Tractors and machinery for agriculture and forestry ISO/CD 14982 Agricultural and forestry machinery — Electro- magnetic compatibility — Test methods and acceptance criteria TC 29 Small tools ISO/CD Tools for pressing — Gas springs — Part 3: 11901-3 Gas spring with increased spring force and CD registered compact built height ISO/CD Tools for pressing — Gas springs — Part 4: 11901-4 Gas springs with increased spring force and same built height Period from 01 June to 01 July 2020 These documents are currently under consideration in the technical TC 30 Measurement of fluid flow in closed committee.
    [Show full text]
  • WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018)
    WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018) Technical Committee No. 1 “Quality assurance and social responsibility”, 11 standards No. Standard number English title 1. EN ISO 22300:2018 Security and resilience - Vocabulary (ISO 22300:2018) 2. CEN/TS 17159:2018 Societal and citizen security - Guidance for the security of hazardous materials (CBRNE) in healthcare facilities 3. EN ISO 9004:2018 Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018) 4. CWA 17145-2:2017 Ethics assessment for research and innovation - Part 2: Ethical impact assessment framework 5. CWA 17145-1:2017 Ethics assessment for research and innovation - Part 1: Ethics committee 6. EN ISO 41011:2018 Facility management - Vocabulary (ISO 41011:2017) 7. EN ISO 41001:2018 Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018) 8. IWA 18:2016 Framework for integrated community-based life-long health and care services in aged societies 9. IWA 16:2015 International harmonized method(s) for a coherent quantification of CO2e emissions of freight transport 10. ISO/IEC Guide 17:2016 ISO/IEC Guide 17:2016Guide for writing standards taking into account the needs of micro, small and medium-sized enterprises 11. ISO 37500:2014 Guidance on outsourcing Technical Committee No. 3 “Electrical and electronical materials”, 59 standards No. Standard number English title 1. EN 50288-12-1:2017 Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - 1 Horizontal and building backbone cables 2.
    [Show full text]
  • Eo Collection Geojson(-Ld) Encoding
    OGC® DOCUMENT: 17-084R1 External idenfier of this OGC® document: hp://www.opengis.net/doc/BP/eoc- geojson/1.0 EO COLLECTION GEOJSON(-LD) ENCODING BEST PRACTICE General Version: 1.0 Submission Date: 2020-01-30 Approval Date: 2020-05-09 Publicaon Date: 2021-04-21 Editor: Y. Coene, U. Voges, O. Barois Warning: This document defines an OGC Best Pracce on a parcular technology or approach related to an OGC standard. This document is not an OGC Standard and may not be referred to as an OGC Standard. It is subject to change without noce. However, this document is an official posion of the OGC membership on this parcular technology topic. Recipients of this document are invited to submit, with their comments, noficaon of any relevant patent rights of which they are aware and to provide supporng documentaon. License Agreement Permission is hereby granted by the Open Geospaal Consorum, (“Licensor”), free of charge and subject to the terms set forth below, to any person obtaining a copy of this Intellectual Property and any associated documentaon, to deal in the Intellectual Property without restricon (except as set forth below), including without limitaon the rights to implement, use, copy, modify, merge, publish, distribute, and/or sublicense copies of the Intellectual Property, and to permit persons to whom the Intellectual Property is furnished to do so, provided that all copyright noces on the intellectual property are retained intact and that each person to whom the Intellectual Property is furnished agrees to the terms of this Agreement. If you modify the Intellectual Property, all copies of the modified Intellectual Property must include, in addion to the above copyright noce, a noce that the Intellectual Property includes modificaons that have not been approved or adopted by LICENSOR.
    [Show full text]
  • Products Subject to Pvoc Programme
    UGANDA NATIONAL BUREAU OF STANDARDS LIST OF PRODUCTS UNDER COMPULSORY STANDARDS SUBJECT TO THE PVOC PROGRAMME AS AT AUGUST 2015 GROUP I – TOYS PR. NO. PRODUCT ITEMS HS CODES Applicable Uganda Standards I-01 TOYS, INCL. VIDEO GAMES AND OTHER 9503.00.00 Compulsory Uganda Standards ELECTRONIC TOYS, DOLLS, TRICYCLES, NON 1. US ISO 8124-1:2007, Safety of toys — Part 1: ELECTRIC MUSICAL INSTRUMENTS ETC Safety aspects related to mechanical and physical properties (2nd Edition) 2. US ISO 8124-2:2007, Safety of toys — Part 2: Flammability (2nd Edition) 3. US ISO 8124-3:2010/Amd.1:2014, Safety of toys — Part 3: Migration of certain elements (2nd Edition) 4. US ISO 8124-4:2010, Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use I-02 GYMNASIUM, FITNESS AND HEALTH RELATED 9506.91.00 PRODUCTS. International Standards ASTM Standards, F 1749, Specification for Fitness Equipment and Fitness Facility Safety Signage and Labels; F 2106, Test Method for Treadmills; F 2115, Specification for Standards for Treadmills; F 2216, Specification for Selectorized Strength Equipment; F 2276, Specification for Fitness Equipment; 2015-08-06 1/161 UGANDA NATIONAL BUREAU OF STANDARDS F 2277, Test Method for Selectorized Strength Equipment. F3021-13 Standard Specification for Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments I-03 BABY TROLLEY AND OTHER RELATED PRODUCTS 8715.00.00 Compulsory Uganda Standards INCL. BABY CRIB, BABY ROCKER US 1570:2014, Standard consumer safety specification for soft infant and toddler carriers International Standards ASTM F833 - 11 Standard Consumer Safety Performance Specification for Carriages and Strollers AS/NZS 2088:2000 ‘Prams and strollers— safety requirements’.
    [Show full text]