LIST FOR CONFIRMATIONS AND WITHDRAWALS APPROVED BY THE 118TH STANDARDS APPROVAL COMMITTEE MEETING ON 5TH APRIL 2018 CHEMICAL DEPARTMENT CONFIRMATIONS 1. KS ISO 618:1974 Kenya Standard — Paper — Articles of stationery that include detachable sheets — Overall trimmed sizes 2. KS 811:2013 Kenya Standard — Silk (sheen) emulsion paints for interior and exterior use — Specification 3. KS ISO 22414:2004 Kenya Standard — Paper — Cut-size office paper — Measurement of edge quality 4. KS ISO 15318:1999 Kenya Standard — Pulp, paper and board — Determination of 7 specified polychlorinated biphenyls (PCB) 5. KS ISO 15360-1:2000 Kenya Standard — Recycled pulps — Estimation of stickies and Plastics Part 1: Visual method. 6. KS ISO 23713:2005 Kenya Standard — Pulps — Determination of fibre coarseness by automated optical analysis - Polarized light method 7. KS ISO 353:1975 Kenya Standard — Processed writing paper and certain classes of printed matter - Method of expression of dimensions. 8. KS 2351:2012 Kenya Standard — Surgical spirit — Specification 9. KS 924:2012 Kenya Standard — Specification for motor vehicle chevrons, decals and strips 10. KS 2350:2012 Kenya Standard — Sodium silicate — Specification 11. KS 87:2012 Kenya Standard — Hydrochloric acid — Specification 12. KS 1180:2012 Kenya Standard — Ethyl methyl ketone(butanone for industrial use) — Specification WITHDRAWALS List of Kenya Standards for withdrawal in accordance with SQMT ACT with similar scope as endorsed EAS Standards on paints and allied products 13. KS 667:2013 Kenya Standard — Water-thinned priming paints for wood — Specification 14. KS 811:2013 Kenya Standard — Silk (sheen) emulsion paints for interior and exterior use — Specification 15. KS 813:2013 Kenya Standard — Matt solvent-borne paints for interior and exterior use — Specification 16. KS 812:2012 Kenya Standard — Matt emulsion paints for interior and exterior use — Specification 17. KS 1276:2012 Kenya Standard — Air-dried roofing paints — Specification 18. KS 1027-1:2012 Kenya Standard — Auto refinishing paints — Specification Part 1: Synthetic resin based 19. KS 1027-2:2012 Kenya Standard — Auto refinishing paints — Specification Part 2: Nitrocellulose resin based 20. KS 1718:2003 Kenya Standard — Thinner for nitrocellulose resin-based paints and lacquers — Specification 21. KS 1717:2003 Kenya Standard — Thinner for synthetic resin-based auto-refinishing paints — Specification 22. KS 1716:2012 Kenya Standard — 2-Pack acrylic resin-based auto-refinishing paint — Specification. 23. KS 1719:2003 Kenya Standard — Thinner for acrylic resin based auto-refinishing paint — Specification 24. KS ISO 15360-1:2000 Kenya Standard — Recycled pulps — Estimation of Stickies and Plastics Part 1: Visual method. Replaced by KS ISO 15360-1:2011 25. KS ISO 15360-2: 2001 Kenya Standard — Recycled pulps — Estimation of Stickies and Plastics Part 2: Image analysis method. / Paper and Paper Products Replaced by KS ISO 15360-2:2015 26. KS ISO 16065-1:2001 Kenya Standard — Pulps — Determination of fibre length by automated optical analysis — Part 1: Polarized light method. / Paper and paper product. Replaced by KS ISO 16065-1:2014 27. KS ISO 8784-1:2005 Kenya Standard — Pulp, paper and board — Microbiological examination Part 1: Total count of bacteria, yeast and mould based on disintegration. / Paper and Paper Products. Replaced by KS ISO 8784:2014. 28. KS ISO 5270:1998 Kenya Standard —Pulps — Laboratory sheets — Determination of physical properties Replaced by KS ISO 5770:2012 Page 1 of 11 LIST FOR CONFIRMATIONS AND WITHDRAWALS APPROVED BY THE 118TH STANDARDS APPROVAL COMMITTEE MEETING ON 5TH APRIL 2018 29. KS 2157-1:2009 Kenya Standard — Hot applied thermoplastic road marking paint — Specification Part 1: Constituent material and mixtures, To be replaced by KS 2157-1:2018 30. KS 2157-2:2009 Kenya Standard — Hot applied Thermoplastic Road Marking paint — Specification Part 2: Specification for road performance, To be replaced by KS 2157-2:2018 31. KS 421:2010 Kenya Standard — Newsprint — Specification, To be replaced by KS 421;2018 32. KS 921:1991 Kenya Standard — Specification for kraft liner, To be replaced by KS 921:2018 ELECTROTECHNICAL DEPARTMENT CONFIRMATIONS 33. KS 1075-3:1991 Kenya Standard — Glossary of terms relating to fishing nets Part 3: Description and designation of knotted netting 34. KS 1076:1998 Kenya Standard — Specification for fishing nets 35. KS 1129-2:1992 Kenya Standard — Test methods for fishing nets Part 2: Determination of breaking load of knot and netting yarn 36. KS 1129-3:1995 Kenya Standard —Test methods for fishing nets Part 3: Determination of elongation of netting yarns 37. KS 1129-5:1997 Kenya Standard — Test methods for fishing nets Part 5: Determination of mesh breaking load of netting 38. KS 1630-1:2002 Kenya Standard — Methods of test for knitted fabrics Part 1: Method for determination of dimensions and dimensional stability of knitted fabrics 39. KS 207-2:1996 Kenya Standard — Glossary of textile terms pertaining to defects in fabrics Part 2: Knitted fabrics 40. KS 438:1985 Kenya Standard — Method for determination of pilling resistance of fabrics (brush pilling tester) 41. KS 493:1983 Kenya Standard — Specification for knitted nylon fabric 42. KS 494:1983 Kenya Standard — Specification for knitted vests 43. KS 495:1983 Kenya Standard — Specification for gent's knitted briefs 44. KS 525:1984 Kenya Standard — Specification for ladies knitted briefs 45. KS 632:1988 Methods for determination of dimensional changes of knitted products containing wool 46. KS 781-1:1988 Kenya Standard — Specification for cones Part 1: Paper cones 47. KS 781-2:1989 Kenya Standard — Specification for cones Part 2: Plastic cones 48. KS ISO 13938-1:1999 Textiles — Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension 49. KS ISO 13938-2:1999 Kenya Standard — Textiles — Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension 50. KS ISO 23606:2009 Kenya Standard — Textiles Knitted fabrics — Representation and pattern design 51. KS 1113-1:1993 Kenya Standard — Specification for spun yarns Part 1: Cotton yarns 52. KS 1113-3:1993 Kenya Standard — Specification for spun yarns Part 3: Polyester / Cellulosic blended yarns 53. KS 1113-4:1996 Kenya Standard — Specification for staple spun yarns Part 4: Polyester/Wool blended yarns 54. KS 1120:1992 Kenya Standard — Specification for doubling and twisting bobbins 55. KS 1128:1995 Kenya Standard — Specification for wicks for non-pressure stoves 56. KS 1233:1992 Kenya Standard — Specification for spinning doubling and twisting rings 57. KS 529:1984 Kenya Standard — Specification for elastic flat braid 58. KS 665:1998 Kenya Standard — Specification for textile labels 59. KS 933:1990 Kenya Standard — Specification for tubes (bobbins) for ring spinning 60. KS 588: 1999 Kenya Standard — Specification for PVC slippers 61. KS IEC 60514:1975 Kenya Standard — Acceptance inspection of class 2 alternating-current watthour meters. 62. KS EAS 388-2:2005 Kenya Standard — High-voltage fuses Part 2: Expulsion fuses 63. KS 1187:1993 Kenya Standard — Specification for metallic clips for electrical wiring 64. KS 311-1:1987 Kenya Standard — Specification for miniature circuit breakers (MCB's) Page 2 of 11 LIST FOR CONFIRMATIONS AND WITHDRAWALS APPROVED BY THE 118TH STANDARDS APPROVAL COMMITTEE MEETING ON 5TH APRIL 2018 65. KS IEC 61643-1:2002 Kenya Standard — Surge protective devices connected to low-voltage power distribution systems Part 1: Performance requirements and testing methods 66. KS 1827:2007 Kenya Standard — Voltage characteristics of electricity supplied by public distribution systems 67. KS 311-1:1987 Kenya Standard — Specification for miniature circuit breakers (MCB's) 68. KS ISO 361:1975 Kenya Standard — Basic ionizing radiation symbol 69. KS ISO 14152:2001 Kenya Standard — Neutron radiation protection shielding — Design principles and considerations for the choice of appropriate materials 70. KS ISO 14146:2000 Kenya Standard — Radiation protection — Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation 71. KS ISO 8194:1987 Kenya Standard — Radiation protection — Clothing for protection against radioactive contamination – Design, selection, testing and use 72. KS OIML R 119:1996 Kenya Standard — Pipe provers for testing measuring systems for liquids other than water 73. KS 1950:2007 Kenya Standard — X-ray analysis equipment — Protection against ionizing radiation — Code of practice 74. KS 1988:2007 Kenya Standard — Safe use of radiation gauges — Code of practice 75. KS 1989:2006 Kenya Standard — Cabinet X-ray equipment for examination of letters packages, baggage, freight and other articles for security, quality control and other purposes ― Requirements 76. KS 1990:2007 Kenya Standard — Safe use of ionizing radiation in training institutions — Code of practice 77. KS 2032:2007 Kenya Standard — Near-surface disposal radioactive waste — Code of practice 78. KS 2029:2007 Kenya Standard — Corpses containing radioactive materials — Safe handling — Code of practice 79. KS 2030:2007 Kenya Standard — Discharge of patients undergoing treatment with radioactive substances — Code of practice 80. KS 1953:2007 Kenya Standard — Healthcare practitioners exposed to ionizing radiation — Code of practice. 81. KS 1954:2007 Kenya Standard — Medical research — Administration of ionizing radiation to human