Wood fibre insulation boards Insulation material made of wooden soft fibres is a modern and environmentally acceptable way of insulation.
22 Advantages of wood fibre insulation boards
Customized order quantities
The quantity needed by you will be delivered. Your order quantity will only be rounded up to one pair of boards (2 boards) according to the production needs, as common in the production of Gluelam. As you do not have to order full palettes you may save costs. • less “scraps” • no additional fees for smaller units
The insulation board may be used on both sides!
Due to the assembling like a sandwich we achieve an augmented surface strength on both sides. Thanks to the augmented surface strength the wood fibre insulation board does not have an upper or lower side. Because of this the panels may be placed effectively and with less cut-off. Increase compressive strenght on both sides outside
Increased density in the outer area
Water-repellent
Except of the Flex 50 all wood fibre insulation boards are treated with paraffin wax.
Slip resistant
Due to a special coating with latex the TOP 180 has a slip resistant surface. Our target is to assure more safety for the work on the roof.
Reduction of dust
A dust separation tool is used for the production – this assures a reduction of dust during the handling.
Edge Profiles
Wood fibre insulation boards are produced with different edge profiles respectively angles. stump shiplap edge tongue and groove 23 Overview Wood fibre insulation boards
Top 180 Multitherm 140 Weatherproof insulation board under roof Insulation board – universal application
Multitherm 110 Insulation board – universal application
Multitherm 140 Insulation board – universal application
Flex 50 Flexible insulation board
Multitherm 140 Insulation board – universal application
Wall 140 Plasterable insulation board on brickwork
Flex 50 Flexible insulation board
Room 150 Plasterable interior insulation board
24 Flex 50 Flexible insulation board Flex 50 is the ideal insulation for rafter areas of ceilings and timber framing. Due to its consistence Flex 50 is userfriendly.
Multitherm 110 Insulation board – universal application Multitherm 110 is a pressure-resistant wood fibre board with low weight and an excellent value for the thermal conductivity. Multitherm 110 may be used in roofs as well as Top 180 in walls. In combination with Multitherm 140 it is an economical Weatherproof insulation board under roof solution for thick insulation layers.
Multitherm 140 Flex 50 Flexible insulation board Insulation board – universal application MULTITHERM 140 is a pressure-resistant, completely water- repellent insulation for roof and frontages. Due to its high stability and pressure-resistance it is suitable for applications under the floor screed.
Room 150 Plasterable interior insulation board Top 180 Weatherproof insulation board under roof TOP 180 is a high pressure - and weather resistant insulation Flex 50 board. Top 180 may temporarily be used as weatherproof roof Flexible insulation board during the construction period, once the roof pitch is at least 18°. It is also excellent for the use as insulation for a weathered frontage. Due to its surface coating with latex the surface is slip resistant. Multitherm 140 Insulation board – universal application Room 150 Plasterable interior insulation board Plasterable interior wood fibre board ROOM 150. ROOM 150 may also be fixed on the post construction with wooden Wall 180 uprights. Insulation board – universal application
Wall 140 Plasterable insulation board for solid wood and brickwork Wall 140 is a high pressure proof, plasterable wood fibre Flex 50 insulation board. It is to be fixed on solid wood or brickwork Insulation board – universal application of exterior walls.
Wall 180 Plasterable insulation board for timber framed constructions WALL 180 is a high pressure-resistant, plasterable wood fibre insulation board which is to be fixed on the post construction with wooden upright of exterior walls. 25 Flex 50 Flexible insulation board
Standard sizes Special sizes width of 500 – 800 mm
Edge profile stump stump Cover size standard size 565 x 1200 mm Special sizes width of 500 – 800 mm x 1200 mm
Thickness Available Units on a Available in mm thickness/size “small palette” thickness/size
40 104 50 80 60 72 80 56 100 40 120 40 140 32 160 30 180 24 200 24 220 20 240 20
Minimum purchase “small palette” about 3,0 m3
Palettes and packing units
“Small palette” about 3 m3 “Medium palette” about 5 m3 “Large palette” about 7 m3 Palette size: Palette size: Palette size: L 120 cm - W 120 cm - H 240 cm L 180 cm - W 120 cm - H 240 cm L 240 cm - W 120 cm - H 240 cm
Certificates
26 Product description Field of application according to DIN 4108-10 Flex 50 is the ideal insulation for rafter areas of ceilings and timber DAD-dk, DI-zk, WTR, WI-zk, DZ, WH framing. Due to its consistence Flex 50 is user friendly. Insulation between rafters Nominal value of thermal conductivity: 0,037 W/(m·K) Infilling insulation of walls and prefab 3 Density: 50 kg/m constructions with wooden uprights Insulation of wooden ceilings Insulation of upper floor slab Insulation of installation level
You may find an explicit explanation of the different fields of application on our technical data sheet.
Characteristics of wood fibre insulation board FLEX 50 Denomination insulation board WF-EN13171-T2-TR1-AF5-MU1/2 German technical approval DiBt Z-23.15 1828 Density 50 kg/m3 Nominal value of thermal conductivity 0,037 W/(m·K) Rated value of thermal conductivity 0,038 W/(m·K) Reaction to fire according to DIN EN 13501 E Building material class according to DIN 4102 B2 Complete declaration wood fibres, polyamide (binding fibre), ammonium phosphate (flame retardant) Production method dry process Water vapour/diffusion resistance 1/2 Significant thermal capacity 2100 (J/kg K) Waste code according to AVV 030105, 170201
Field of application
Top 180
Top 180 Flex 50 As infilling insulation of constructions with wooden uprights plasterboard Flex 50 Room 150 Flex 50 As insulation of the installation level As cavity insulation in Flex 50 as insulation between rafters timber frame contruction under TOP 180
27 Multitherm 110 Insulation board – universal application
Available sizes and prices
Edge profile stump shiplap edge tongue and groove Cover size 600 x 1250 mm (0,75 m2) 590 x 1250 mm (0,73 m2) 572 x 1250 mm (0,71 m2) (m2 per board) 600 x 1500 mm (0,90 m2) 590 x 1500 mm (0,88 m2) 572 x 1500 mm (0,86 m2) 600 x 2000 mm (1,20 m2) 590 x 2000 mm (1,18 m2) 572 x 2000 mm (1,14 m2) 600 x 2500 mm (1,50 m2) 590 x 2500 mm (1,47 m2) 572 x 2500 mm (1,43 m2)
Thickness available available available Units in mm thickness/size thickness/size thickness/size per palette
40 58 50 48 60 40 80 30 100 24 120 20 140 16 160 14 180 12 200 10 220 10 240 10
Certificates
28 Product description Field of application according to Din 4108-10 Multitherm 110 is a pressure-resistant wood fibre board with DAD-dg, DZ, DI-zg, DEO-dg, WAB-dg, WH, WI-zg, WTR low weight and an excellent value for the thermal conductivity. Multitherm 110 may be used in roofs as well as in walls. Foundation board of walls and roof In combination with Multitherm 140 it is an economical solution for thick insulation layers. Suitable for the installation level
Nominal value of thermal conductivity: 0,037 W/(m·K) You may find an explicit explanation of the Density: 110 kg/m3 different fields of application on our technical data sheet.
Characteristics of wood fibre insulation board Multitherm 110 Denomination insulation board WF-EN13171-T4-CS(10\Y)40 TR5-WS1,0 AF100 MU3 German technical approval DiBt Z-23.15 1828 Density 110 kg/m3 Nominal value of thermal conductivity 0,037 W/(m·K) Rated value of thermal conductivity 0,039 W/(m·K) Reaction to fire according to DIN EN 13501 E Building material class according to DIN4102 B2 Complete declaration wood fibres, PMDI gluing, paraffin Production method dry process Compressive resistance vertical to the plane of the panel ≥ 50 kPa Water vapour/diffusion resistance 3 Linear flow resistance > 100 kPa·s/m2 Short time water absorption ≤ 1,0 kg/m2 Significant thermal capacity 2100 (J/kg K) Waste code according to AVV 030105, 170201
Further fields of application
Multitherm 110
Flex 50
Multitherm 140 External Multitherm 110 plasterboard shuttering
Multitherm 110 Economical solution in combination with Multitherm 140 Multitherm 110 as installation level
29 Multitherm 140 Insulation board – universal application
Available sizes and prices
Edge profile stump shiplap edge tongue and groove Cover size 600 x 1250 mm (0,75 m2) 590 x 1250 mm (0,73 m2) 572 x 1250 mm (0,71 m2) (m2 per board) 600 x 1500 mm (0,90 m2) 590 x 1500 mm (0,88 m2) 572 x 1500 mm (0,86 m2) 600 x 2000 mm (1,20 m2) 590 x 2000 mm (1,18 m2) 572 x 2000 mm (1,14 m2) 600 x 2500 mm (1,50 m2) 590 x 2500 mm (1,47 m2) 572 x 2500 mm (1,43 m2)
Thickness available available available Units in mm thickness/size thickness/size thickness/size per palette
20 58 40 48 60 40 80 30 100 24 120 20 140 16 160 14 180 12 200 10 220 10 240 10
Certificates
30 Product description Fields of application according to DIN 4108-10 Multitherm 140 is a pressure-resistant, completely water-repellent DAD-dm, DEO-dm, WH, WTR, DI-dm, WAB-dm insulation for roof and frontages. Due to its high stability and pressure-resistance it is suitable for applications under the floor Insulation under roof screed. Insulation for walls and ceilings Nominal value of thermal conductivity: 0,040 W/(m·K) Behind frontages 3 Density: 140 kg/m Directly on rafters Insulation under floor screed
You may find an explicit explanation of the different fields of application on our technical data sheet.
Characteristics of wood fibre insulation board Multitherm 140 Denomination insulation board WF-EN13171-T4-CS(10\Y)70-TR7,5-WS1,0-AF100-MU3 German technical approval DiBt Z-23.15 1828 Density 140 kg/m3 Nominal value of thermal conductivity 0,040 W/(m·K) Rated value of thermal conductivity 0,042 W/(m·K) Reaction to fire according to DIN EN 13501 E Building material class according to DIN4102 B2 Complete declaration wood fibres, PMDI gluing, paraffin Production method dry process Compressive resistance vertical to the plane of the plate ≥ 90 kPa Tenacity vertical to the plane of the plate ≥ 20 kPa Water vapour/diffusion resistance 3 Linear flow resistance > 100 kPa·s/m2 Short time water absorption ≤ 1,0 kg/m2 Significant thermal capacity 2100 (J/kg K) Waste code according to AVV 030105, 170201
Fields of application
Multitherm 140 Pressure resistant insulation board for the roof
Multitherm 110 Multitherm 140
Insulation of the roof together with Multitherm 110 Insulation against air and subsonic noise of visible timber beam floors.
31 Top 180 Weatherproof insulation under roof
Available sizes and prices
Edge profile tongue and groove Cover size 572 x 2000 mm (1,14 m2) (m2 per board) 572 x 2500 mm (1,43 m2)
Thickness available Units in mm thickness/size per palette
22 108 35 66 50 48 60 40 80 30 100 24 120 20 140 16 160 14 Top 220 with higher density density: 220 kg/m3
Edge profile tongue and groove Cover size 572 x 2000 mm (1,14 m2) (m2 per board) 572 x 2500 mm (1,43 m2)
Thickness available Units in mm thickness/size per palette
22 108 35 66 50 48
Characteristics of TOP 220 with higher density Compressive resistance vertical to the plane of the plate ≥ 280 kPa Tenacity vertical to the plane of the plate ≥ 42 kPa
Certificates
32 Product description Field of application according to DIN 4108-10 TOP 180 is a high pressure- and weather resistant insulation board. DAD-ds, DI-zg, DEO-ds, WAB-ds, WH, WI-zg, WZ Top 180 may temporarily be used as weatherproof roof during the construction period, once the roof pitch is at least 18°. It is also This insulation may be used temporarily excellent for the use as insulation for a weathered frontage. Due as weatherproof roof to its surface coating with latex the surface is slip resistant. Weatherproof insulation board, which Nominal value of thermal conductivity: 0,042 W/(m·K) may be used as temporary roof during the Density: 180 kg/m3 construction period Water resistant insulation board for roof and walls Behind frontages
You may find an explicit explanation of the different fields of application on our technical data sheet.
Characteristics of wood fibre insulation board TOP 180 Denomination insulation board WF-EN13171-T4-CS(10\Y)100-TR7,5-WS1,0-AF100-MU3 German technical approval DiBt Z-23.15 1828 Density 180 kg/m3 Nominal value of thermal conductivity 0,042 W/(m·K) Rated value of thermal conductivity 0,044 W/(m·K) Reaction to fire according to DIN EN 13501 E Building material class according to DIN4102 B2 Complete declaration wood fibres, PMDI gluing, paraffin, latex Production method dry process Compressive resistance vertical to the plane of the plate ≥ 200 kPa Tenacity vertical to the plane of the plate ≥ 30 kPa Water vapour/diffusion resistance 3 Linear flow resistance > 100 kPa·s/m2 Short time water absorption ≤ 1,0 kg/m2 Significant thermal capacity 2100 (J/kg K) Waste code according to AVV 030105, 170201
Field of application
Top 180 Weatherproof insulation under roof
Top 180
Flex 50 Flex 50
Room 150 TOP 180 as weatherproof insulation behind frontages
33 Room 150 Plasterable interior insulation board
Available sizes and prices
Edge profile stump shiplap edge tongue and groove Cover size 600 x 1250 mm (0,75 m2) 590 x 1250 mm (0,73 m2) 572 x 1250 mm (0,71 m2) (m2 per board) 600 x 1500 mm (0,90 m2) 590 x 1500 mm (0,88 m2) 572 x 1500 mm (0,86 m2) 600 x 2000 mm (1,20 m2) 590 x 2000 mm (1,18 m2) 572 x 2000 mm (1,14 m2) 600 x 2500 mm (1,50 m2) 590 x 2500 mm (1,47 m2) 572 x 2500 mm (1,43 m2)
Thickness available available available Units in mm thickness/size thickness/size thickness/size per palette
20 120 40 58 60 40 80 30 100 24 120 20 140 16 160 14 180 12 200 12
Certificates
34 Product description Field of application according to Din 4108-10 Plasterable Interior wood fibre board ROOM 150. ROOM 150 WI-zg, WH may also be fixed on the post construction with wooden uprights. Possible to be fixed directly on the brickwork Nominal value of thermal conductivity: 0,041 W/(m·K) Plasterable on interior walls Density: 150 kg/m3 You may find an explicit explanation of the different fields of application on our technical data sheet.
Characteristics of wood fibre insulation board ROOM 150 Denomination insulation board WF-EN13171-T4-CS(10\Y)70-TR7,5-WS1,0-AF100-MU3 German technical approval DiBt Z-23.15 1828 Density 150 kg/m3 Nominal value of thermal conductivity 0,041 W/(m·K) Rated value of thermal conductivity 0,043 W/(m·K) Reaction to fire according to DIN EN 13501 E Building material class according to DIN4102 B2 Complete declaration wood fibres, PMDI gluing, paraffin Production method dry process Compressive resistance vertical to the plane of the plate ≥ 90 kPa Tenacity vertical to the plane of the plate ≥ 20 kPa Water vapour/ diffusion resistance 3 Linear flow resistance > 100 kPa·s/m2 Short time water absorption ≤ 1,0 kg/m2 Significant thermal capacity 2100 (J/kg K) Waste code according to AVV 030105, 170201
Field of application
Room 150
Flex 50 Exterior plaster Interior plaster
Top 180
Room 150 Plasterable insulation board plasterable insulation board for the interior walls of for interior walls Interior plaster a post construction with wooden uprights. 35 Wall 140 Plasterable insulation board for solid wood and brickwork
Available sizes and prices
Edge profile stump shiplap edge Cover size 600 x 1250 mm (0,75 m2) 590 x 1240 mm (0,73 m2) (m2 per board)
Thickness available available Units in mm thickness/size thickness/size per palette
40 58 60 40 80 30 100 24 120 20 140 16 160 14 180 12 200 10 220 10
Certificates
36 Product description Fields of application according to DIN 4108-10 WALL 140 is a high pressure proof, plasterable wood fibre WABdm-WAPzh-WH-WLzg insulation board. It is to be fixed on solid wood or brickwork of exterior walls. Exterior walls made of solid wood and Nominal value of thermal conductivity: 0,040 W/(m·K) brickwork Density: 140 kg/m3 Plasterable You may find an explicit explanation of the different fields of application on our technical data sheet.
Characteristics of wood fibre insulation board Wall 140 Denomination insulation board WF-EN-13171-T4-TR 10-CS(10/Y) 100-WS 1,0-MU5-AF100 German technical approval DiBt Z-23.15 1828 Density 140 kg/m3 Nominal value of thermal conductivity 0,040 W/(m·K) Rated value of thermal conductivity 0,042 W/(m·K) Reaction to fire according to DIN EN 13501 E Building material class according to DIN4102 B2 Complete declaration wood fibres, PMDI gluing, paraffin Production method dry process Compressive resistance vertical to the plane of the plate ≥ 100 kPa Tenacity vertical to the plane of the plate ≥ 20 kPa Water vapour/diffusion resistance 3 Linear flow resistance > 100 kPa·s/m2 Short time water absorption ≤ 1,0 kg/m2 Significant thermal capacity 2100 (J/kg K) Waste code according to AVV 030105, 170201
Fields of application
Interior plaster Interior plaster
Exterior plaster Exterior plaster
Wall 140 Wall 140 Plasterable insulation board fixed on a BSP
37 Wall 180 Plasterable insulation board for timber framed constructions
Available sizes and prices
tongue and groove Cover size 572 x 1500 mm (0,85 m2) (m2 per board) 572 x 2000 mm (1,14 m2) 572 x 2500 mm (1,43 m2)
Thickness available Units in mm thickness/size per palette
40 60 60 40 80 30 100 24 120 20 140 16 160 14 180 12
Certificates
38 Product description Fields of application according to DIN 4108-10 WALL 180 is a high pressure-resistant, plasterable wood fibre WABds-WAPzh-WH-WLzg insulation board which is to be fixed on the post construction with wooden upright of exterior walls. Timber framed constructions of exterior walls
Nominal value of thermal conductivity: 0,042 W/(m·K) Plasterable Density: 180 kg/m3 You may find an explicit explanation of the different fields of application on our technical data sheet.
Characteristics of wood fibre insulation board Wall 180 Denomination insulation board WF-EN-13171-T3-DS(70,)2-CS(10/Y)70-TR7,5-WS1,0-MU3-AF100 German technical approval DiBt Z-23.15 1828 Density 180 kg/m3 Nominal value of thermal conductivity 0,042 W/(m·K) Rated value of thermal conductivity 0,044 W/(m·K) Reaction to fire according to DIN EN 13501 E Building material class according to DIN4102 B2 Complete declaration wood fibres, PMDI gluing, paraffin Production method dry process Compressive resistance vertical to the plane of the plate ≥ 200 kPa Tenacity vertical to the plane of the plate ≥ 30 kPa Water vapour/ diffusion resistance 3 Linear flow resistance > 100 kPa·s/m2 Short time water absorption ≤ 1,0 kg/m2 Significant thermal capacity 2100 (J/kg K) Waste code according to AVV 030105, 170201
Fields of application
plasterboard
Exterior plaster
Wall 180 Plasterable insulation board for timber framed construction
39