DOCSLIB.ORG

Tantalum and the Early Group Vb-Vib Metals

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Tantalum and the Early Group Vb-Vib Metals Copyright Warning & Restrictions The copyright law of the United States (Title 17, United States Code) governs the making of photocopies or other reproductions of copyrighted material. Under certain conditions specified in the law, libraries and archives are authorized to furnish a photocopy or other reproduction. One of these specified conditions is that the photocopy or reproduction is not to be “used for any purpose other than private study, scholarship, or research.” If a, user makes a request for, or later uses, a photocopy or reproduction for purposes in excess of “fair use” that user may be liable for copyright infringement, This institution reserves the right to refuse to accept a copying order if, in its judgment, fulfillment of the order would involve violation of copyright law. Please Note: The author retains the copyright while the New Jersey Institute of Technology reserves the right to distribute this thesis or dissertation Printing note: If you do not wish to print this page, then select “Pages from: first page # to: last page #” on the print dialog screen The Van Houten library has removed some of the personal information and all signatures from the approval page and biographical sketches of theses and dissertations in order to protect the identity of NJIT graduates and faculty. ABSTRACT UNDERSTANDING THE ORIGINS OF METASTABILITY IN THIN FILM GROWTH; TANTALUM AND THE EARLY GROUP VB-VIB METALS by Neme Okechukwu Nnolim ntl ( tl tht hhl przd fr t ppltn n vrt f ndtr, nldn th rltrn ndtr, hr t lrl d n thn fl dftn n rdr t hv vr ltrn, nt nd trtrl pblt n ldtt dv. frntl fr ttbl ph, nldn th llnn 0ph, drn th prprtn f thn fl b tndrd fl dptn thd h pttrn nd ltrdptn. In rdr t n nht nt ttbl ph frtn, th n trnfrtn hn tdd fr nd th nhbrn bd ntrd b (b trntn tl n Grp nd 6 f th rd bl, rltn n th prdtn f hpthtl bd ntrd ttrnl (bt nd f ntrd b (f ph fr ll th tdd tl t rt rtr thn .6 nd l t E rptvl. nt ntnl hr ( n th nrzd Antd ln Wv (AW frl nd th t Ordr rtnl Apprxtn (OA fr th ltn f th ltznn trnprt tn hv bn d t llt th tprtr dpndnt rtvt fr th tdd tl nd rvl tht btrtndd fl trn nt b tlf ffnt t th frtn f 0. r rf lltn f th n ltrn vlt n th prpd 42n trtr f t tht th hh vl f rtvt frntl rd fr 13 -Ta are not an intrinsic property. UNDERSTANDING THE ORIGINS OF METASTABILITY IN THIN FILM GROWTH; TANTALUM AND THE EARLY GROUP VB-VIB METALS by Neme Okechukwu Nnolim A Dissertation Submitted to the Faculty of New Jersey Institute of Technology and Rutgers, The State University of New Jersey-Newark in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy in Applied Physics Federated Physics Department August 2003 Cprht © 200 b Oh nl A IGS ESEE APPROVAL PAGE UNDERSTANDING THE ORIGINS OF METASTABILITY IN THIN FILM GROWTH; TANTALUM AND THE EARLY GROUP VB-VIB METALS Neme Okechukwu Nnolim r. rvr A. n, rttn Ar t At rfr f h, I r.Knnth rr, Ctt Mbr t At rfr f h, I r. Sr] Svrv, Ctt Mbr t Atnt rfr f h, I r. Mhl C. Y. n, Ctt Mbr t Atnt rfr f Chl Ennrn, I r. Ax, Ctt Mbr t At rfr f Cvl Ennrn, I IOGAICA SKEC Athr: Oh nl r: tr f hlph t: At 200 Undrrdt nd Grdt Edtn: • tr f hlph n Mtrl Sn nd Ennrn, r Inttt f hnl, r, , 200 • Mtr f Sn n hl Chtr, Mhtt Inttt f hnl, Cbrd, MA, 6 • hlr f Sn n Chl Ennrn, Unvrt f htr, htr, Y, 2 Mjr: Mtrl Sn nd Ennrn rnttn nd bltn: 0. nlrn, rvr A. n nd Ax, "hr f th trtrl ph f Grp — 6 tl nd thr trnprt prprt", rnl f Appld h, l , br 8, p 44 — 460, Aprl 200. 0. nl, rvr A. n nd Ax, "A td f th trtrl ph f th Grp — 6 lnt nd thr hnl prprt", Mtn f th Mtrl rh St, tn, MA, br 2002. 0. nl, rvr A. n nd Ax, "trntn f ttbl trtrl ph n ln — 6 tl b ttl nr pttn", Mtn f th Arn hl St, Indnpl, I, Mrh 2002. v I would like to express my deepest gratitude and appreciation to my dear wife Charlotte Messina-Nnolim and my dear family including my mother Dorothy Adaku Nnolim, my father Benedict Nwankwo Nnolim, my brothers Chukwuma Nnolim and Uche Nnolim, my sister Chiemedinam Nnolim, my Aunt Guy Ilobi, my cousin Chudi Ejekam, my sister-in-law Pamela Messina and my uncle Geoffrey Nnolim for their constant encouragement, support and advice. I could not have done this without them. On Kj, jl p n n I: nh n n Kj b (Whn n fnd nlf tp tll nd ht tr thrn d, ft nt n ptn IGO OE V ACKNOWLEDGMENT I would like to express my sincere appreciation and gratitude to my research supervisor, Dr. Trevor Tyson, who in instances too numerous to count gave me invaluable advice, support and scientific insight and who cheerfully provided resources whenever they were needed. Special thanks are due to Dr. Michael C. Y. Huang, Dr. Sergej Savrasov, Dr. Lisa Axe, and Dr. Kenneth Farmer for being active members of my committee, and to David Perel of the NJIT Computing Services Division for his assistance over the years. vi TABLE OF CONTENTS Chapter Page IOUCIO I.I vr nd Orrn f ntl 2 .2 Extrtn f ntl 6 I. Iprtnt ntl Sr 8 I.4 Crl Mnftr f ntl I . Mhnl nd hrdn rprt f ntl I6 .6 Chl rprt f ntl .6.I ntl Oxd 8 I.6.2 ntlt I.6. ntl ld .6.4 ntl Crbd I.6. ntl trd 20 I.6.6 ntl Slt 20 .6. Anltl Chtr f ntl 20 . U f ntl 2 I.. Crrn rttn 2 ..2 Cptr 22 .. Mdl U f ntl 24 ..4 ntlbd All nd Sprll 28 .. Othr U f ntl 2 TABLE OF CONTENTS (Continued) Chapter Page 2 YSICS A AICAIOS O I IM ECOOGY 2 2.I hn l hnl 2 2.2 Strtrl rprt f hn l 4 2. Eltrl rprt f hn l 2..I hn l tr 2..2 hn l Cptr 2.. hn l Sprndtr 42 2..4 hn l Sndtr 4 2.4 Mnt rprt f hn l 0 2.4.I vrl f Mnt n Unxl hn l 6 2.4.2 Appltn f Mnt Sthn 60 2.4. Strtr pndn f hn l Mnt rprt 6 2. ntl hn l 68 2.. Eltrl Cndtn n ntl hn l 2..2 Sprndtvt n ntl hn l 2.. Strtrl rprt f hn ntl l 2...I h f ntl 6 2...2 h h f ntl 8 I IM GOW A MEASAE ASE OMAIO 88 . ltn hr 88 .2 Mn ld ltn hr viii TABLE OF CONTENTS (Continued) Chapter Page . hrdn l Grth Mdl 0 .4 Knt Mdln f l Grth r I06 . Mttbl h n hn l .. Mttbl h f ntn ..2 Mttbl h f nd 6 .. Mttbl h f ntl 8 .6 hn l ptn Mthd 8 .6. Eltrpltn .6.2 Eltrl ltn I20 .6. Evprtn I2 .6.4 Spttr ptn I2 .6.4. C Gl hr Spttrn 2 .6.4.2 d rn ( Spttrn I2 4 ESIY UCIOA EOY 6 4. h Intrtn Mnd rbl 6 4.2 h hnbrKhn hr 8 4. h KhnSh Etn 40 4.4 tntl Enr rltn n 0 4.4.I h dtntl Mthd I0 4.4.2 h ht ndn Mthd 4.4. h Mffnn tntl Mthd 6 ix TABLE OF CONTENTS (Continued) Chapter Page h Orthnlzd ln Wv (OW Mthd I5 5 h Antd ln Wv (AW Mthd I5 h nrzd Antd ln Wv (AW Mthd 1 7 h AW+l Mthd 17 5 r Mnztn n th AW rl 1 Mnztn f At r 171 1 h rbl Mtr Mthd 171 pd tn n 173 7 r Clltn Mthd 173 Spn-Orbt Cpln n th AW rl 175 5 MEASAE ASES O GOU 5 — ASIIO MEAS 13 51 Strn Anl 1 5 Elt rprt nd th Etn f Stt 193 51 Cb Str 19 5 trnl Str 53 h Eptxl n th 3 5 Mttbl h f th Grp 5 — Mtl 51 Iplnttn tl 5 Clltd Mttbl h nd Enr ffrn 1 53 h - Enr ffrn nd th trnl Shr Cntnt 1 55 Eltrn Strtr pndn f Elt rprt 1 TABLE OF CONTENTS (Continued) Chapter Page 5 nt f Stt 51 h OS 5 t h OS 9 57 d -bnd lln nd th — h Enr ffrn 3 5 Crrltn btn th n nd rr rnfrtn 35 ASO OEIES A MEASAE ASES 1 1 Eltrl tvt 1I Eltrn-hnn Sttrn 7 1 Eltrn-Eltrn nd Othr r f Sttrn 51 hr f th Eltrl tvt 5 I n hr f tvt 5 t Ordr rtnl Apprxtn (OA t th tvt 73 3 l rn 3 rr pndn f rnprt rprt 91 5 Clltd tvt nd Ipltn fr 3- rtn 95 7 OIGI O EA AAUM ESISIIY 35 7I Strtr f 3- 35 71I -1 3- trtr 35 71 2/n 13- trtr 3 7 r Mnztn f /n Strtr f 13- 37 73 Eltrn Strtr f /n Strtr f 3- 311 xi TABLE OF CONTENTS (Continued) Chapter Page 7 Eltrl tvt f 13- 31 71 Ettn f 1- prtr tvt 35 7 Iprtn f Grn ndr nd Iprt Sttrn 3 AEI AAUM I IM EAAIO EAIS 39 EEECES 33 ii LIST OF TABLES Table Page 11 ntl pt Wrldd 5 I Cptn f Iprtnt ntl-ntnn Mnrl 13 ntl Cntnt f th Mt Iprtnt Sl Grd 9 1 Mhnl rprt f Sft Annld ntl 1 15 Crtllrph hrdn nd Eltrn rprt f ntl 17 1 pl rprt f Cptr Grd ntl dr 3 1 S rprtn tl f ntl hn l Obtnd b C Spttrn 31 Intrf Wdth a , trl Crrltn nth nd Avr rr Wdth /I fr Svrl St III 51 Clltd t Elbr tt rtr nd tl Enr r Unt Cll f Mttbl nd Stbl h f Stdd Cb Mtl nd h Enr ffrn ΔEbt-b I 5 Clltd tt Cntnt fr nd h f Mtl n Grp -I f th rd bl nd h Enr ffrn 19 53 Clltd h Shr Cntnt nd l Mdl fr th nd t h f th tdd Mtl 1 5 Clltd tl nt f Stt nd tl d nt f Stt t th r Enr (εF nd Nd (EF ), fr t nd h f th Stdd Mtl 7 55 tl d nt f Stt t th r Enr Nd (EF ), nd Str pd Cpnnt f Nd (EF ) fr nd t h f th Stdd Mtl 5 tl nd rtnl d Opn fr b nd M nd h 3 1 Clltd nd t l rn l ha) fr Stdd Grp 5 nd Grp Mtl 9 Sr f tvt Clltn Mthd 95 x LIST OF TABLES (Continued) Table Page 71 At tn n th -1 Strtr f 13- 3 7 At rtr Adptd fr 13-U /n Strtr nd fnd n th 3- /n Strtr 37 73 At Str p nd thr rt nd xt-rt hbr trbtn n th /n nd -1 Strtr 31 7 r lt nd l rn l Clltd fr /n nd Strtr f 3 75 Exprntll trnd 3- Grn Sz 37 xv LIST OF FIGURES Figure Page I1 Wrldd rrv f tntl r n 1 Mjr tntl prn rt I3 Ct- ht f hp tp tntl ptr dn 1 rnd n hpnt nd nftrn pt f tntl ptr 15 t lltd fr n vv rrn xprnt hn thr dffrnt tr f t rtn t plnt d fr vr tll lnt nd ll 1 rpn t plnt n btn rt t ftr prd f nd n bn frtn rnd plnt n rt fr bn rr ftr th prd f t 7 17 Mrt hr f tntl ppltn fr 1935-1993 31 1 Inr n IC trntr ntrtn dnt vr thr dd 33 Sht dr f nnn ltrn rp (SEM t 35 3 r n fr th fbrtn f rtr nd ptr fr dffrnt tntl thn fl n th btrt I Mr dv prn f "rd" nd "rt" dl nd flp-flp 5 A thn fl trntr 9 t thn th pld fld 59 7 Cnfrtn fr hh pd AM l n n "rd" nd "rt" d I 9 Mntztn ndtn fr bbbl dn frtn 1 S trl d fr bbbl dn 3 Dv LIST OF FIGURES (Continued) Figure Page 1I tl nr pr nt ll fr vrl tl lltd fntn f th Wnr-Stz rd 1 Ar-t-r v plnt fr pttrn 7 13 hn dpndn f 7 fr thn fl 75 I (1 nd (I1I v f nt ll f dtrtd b prltt trtr prpd fr 3- I5 (1 nd (1I1 v f nt ll f /n trtr prpd fr 3- 1 (1 nd (1I1 v f th prpd trtr f 3- 17 (1 nd (II1 v f bd ntrd ttrnl (bt trtr f 3- hxnl trtr f 3- nd A15 trtr f 3- 31 prtr dpndn f th ltr frtn
Load more

Recommended publications
  • The Periodic Table of Elements
    The Periodic Table of Elements 1 2 6 Atomic Number = Number of Protons = Number of Electrons HYDROGENH HELIUMHe 1 Chemical Symbol NON-METALS 4 3 4 C 5 6 7 8 9 10 Li Be CARBON Chemical Name B C N O F Ne LITHIUM BERYLLIUM = Number of Protons + Number of Neutrons* BORON CARBON NITROGEN OXYGEN FLUORINE NEON 7 9 12 Atomic Weight 11 12 14 16 19 20 11 12 13 14 15 16 17 18 SODIUMNa MAGNESIUMMg ALUMINUMAl SILICONSi PHOSPHORUSP SULFURS CHLORINECl ARGONAr 23 24 METALS 27 28 31 32 35 40 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 POTASSIUMK CALCIUMCa SCANDIUMSc TITANIUMTi VANADIUMV CHROMIUMCr MANGANESEMn FeIRON COBALTCo NICKELNi CuCOPPER ZnZINC GALLIUMGa GERMANIUMGe ARSENICAs SELENIUMSe BROMINEBr KRYPTONKr 39 40 45 48 51 52 55 56 59 59 64 65 70 73 75 79 80 84 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 RUBIDIUMRb STRONTIUMSr YTTRIUMY ZIRCONIUMZr NIOBIUMNb MOLYBDENUMMo TECHNETIUMTc RUTHENIUMRu RHODIUMRh PALLADIUMPd AgSILVER CADMIUMCd INDIUMIn SnTIN ANTIMONYSb TELLURIUMTe IODINEI XeXENON 85 88 89 91 93 96 98 101 103 106 108 112 115 119 122 128 127 131 55 56 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 CESIUMCs BARIUMBa HAFNIUMHf TANTALUMTa TUNGSTENW RHENIUMRe OSMIUMOs IRIDIUMIr PLATINUMPt AuGOLD MERCURYHg THALLIUMTl PbLEAD BISMUTHBi POLONIUMPo ASTATINEAt RnRADON 133 137 178 181 184 186 190 192 195 197 201 204 207 209 209 210 222 87 88 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 FRANCIUMFr RADIUMRa RUTHERFORDIUMRf DUBNIUMDb SEABORGIUMSg BOHRIUMBh HASSIUMHs MEITNERIUMMt DARMSTADTIUMDs ROENTGENIUMRg COPERNICIUMCn NIHONIUMNh
    [Show full text]
  • Aluminum Electrolytic Vs. Polymer – Two Technologies – Various Opportunities
    Aluminum Electrolytic vs. Polymer – Two Technologies – Various Opportunities By Pierre Lohrber BU Manager Capacitors Wurth Electronics @APEC 2017 2017 WE eiCap @ APEC PSMA 1 Agenda Electrical Parameter Technology Comparison Application 2017 WE eiCap @ APEC PSMA 2 ESR – How to Calculate? ESR – Equivalent Series Resistance ESR causes heat generation within the capacitor when AC ripple is applied to the capacitor Maximum ESR is normally specified @ 120Hz or 100kHz, @20°C ESR can be calculated like below: ͕ͨ͢ 1 1 ͍̿͌ Ɣ Ɣ ͕ͨ͢ ∗ ͒ ͒ Ɣ Ɣ 2 ∗ ∗ ͚ ∗ ̽ 2 ∗ ∗ ͚ ∗ ̽ ! ∗ ̽ 2017 WE eiCap @ APEC PSMA 3 ESR – Temperature Characteristics Electrolytic Polymer Ta Polymer Al Ceramics 2017 WE eiCap @ APEC PSMA 4 Electrolytic Conductivity Aluminum Electrolytic – Caused by the liquid electrolyte the conductance response is deeply affected – Rated up to 0.04 S/cm Aluminum Polymer – Solid Polymer pushes the conductance response to much higher limits – Rated up to 4 S/cm 2017 WE eiCap @ APEC PSMA 5 Electrical Values – Who’s Best in Class? Aluminum Electrolytic ESR approx. 85m Ω Tantalum Polymer Ripple Current rating approx. ESR approx. 200m Ω 630mA Ripple Current rating approx. 1,900mA Aluminum Polymer ESR approx. 11m Ω Ripple Current rating approx. 5,500mA 2017 WE eiCap @ APEC PSMA 6 Ripple Current >> Temperature Rise Ripple current is the AC component of an applied source (SMPS) Ripple current causes heat inside the capacitor due to the dielectric losses Caused by the changing field strength and the current flow through the capacitor 2017 WE eiCap @ APEC PSMA 7 Impedance Z ͦ 1 ͔ Ɣ ͍̿͌ ͦ + (͒ −͒ )ͦ Ɣ ͍̿͌ ͦ + 2 ∗ ∗ ͚ ∗ ͍̿͆ − 2 ∗ ∗ ͚ ∗ ̽ 2017 WE eiCap @ APEC PSMA 8 Impedance Z Impedance over frequency added with ESR ratio 2017 WE eiCap @ APEC PSMA 9 Impedance @ High Frequencies Aluminum Polymer Capacitors have excellent high frequency characteristics ESR value is ultra low compared to Electrolytic’s and Tantalum’s within 100KHz~1MHz E.g.
    [Show full text]
  • Separation of Niobium and Tantalum - a Literature Survey Ernest L
    Ames Laboratory ISC Technical Reports Ames Laboratory 8-15-1956 Separation of niobium and tantalum - a literature survey Ernest L. Koerner Iowa State College Morton Smutz Iowa State College Follow this and additional works at: http://lib.dr.iastate.edu/ameslab_iscreports Part of the Chemistry Commons Recommended Citation Koerner, Ernest L. and Smutz, Morton, "Separation of niobium and tantalum - a literature survey" (1956). Ames Laboratory ISC Technical Reports. 145. http://lib.dr.iastate.edu/ameslab_iscreports/145 This Report is brought to you for free and open access by the Ames Laboratory at Iowa State University Digital Repository. It has been accepted for inclusion in Ames Laboratory ISC Technical Reports by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. Separation of niobium and tantalum - a literature survey Abstract During recent years increased interest has been shown in the metal niobium. Because niobium has a high melting point (4376° F) and a low neutron cross-section, the Atomic Energy Commission has encouraged research on new methods of winning the metal from its ores with the ultimate hope of finding a process which would yield niobium metal at a reasonable price. The two areas of endeavor in which·the principal difficulties in finding such an economic process occur are the separation of tantalum from the niobium and the conversion of purified niobium salts to the metal. This report, then, was written to consolidate the more important information available in the literature on one of these troublesome areas, that of the separation of niobium and tantalum.
    [Show full text]
  • Effect of Oxygen on the Corrosion of Niobium and Tantalum by Liquid Lithium
    ORNL-TM-4069 DECEIVED BY TIC MAR 2 01973 THE EFFECT OF OXYGEN ON THE CORROSION OF NIOBIUM AND TANTALUM BY LIQUID LITHIUM R. L. Klueh MASTER SiSTiHBUTWfl c-f THIS &3CmMT 13 U&UMITED r. I . • -I ' / •''Hi'; 1 . V/', •• I • • H I •-' , C •!", >i ; ' o ': 'J -1 ; .•..'.' •-•'I' < . • . .J ,• ! OAK RIDGE NATIONAL LABORATORY '-I. ' ' t- /operated'by "unjon 'carbide, coloration • forjhe'u.s. atowic1 ENERGY'CQMMISSION 1 • - " <•:-.*- '' .1 iS> '•'• . ' , 1 <• \ .1 I . 'v: • = 1 r i. H. ORNL-TM-4069 Contract No. W-7405-eng-26 METALS AND CERAMICS DIVISION THE EFFECT OF OXYGEN ON THE CORROSION OF NIOBIUM AND TANTALUM BY LIQUID LITHIUM R. L. Klueh NOTICE This report was prepared as an account of work sponsored by the United States Government. Neither the United States noi' the United States Atomic Energy Commission, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility fir the accuracy, com- pleteness or usefulness of any information, apparatus, product or process disclosed, or represents that its use would not infringe privately owned rights. MARCH 1973 OAK RIDGE NATIONAL LABORATORY Oak Ridge, Tennessee 37830 operated by • i UNION CARBIDE CORPORATION for the U.S. ATOMIC ENERGY COMMISSION MASTER • • • 11X CONTENTS Page Abstract 1 Introduction 1 Experimental 5 Results ...... 7 The Effect of Oxygen in Lithium 7 The Effect of Oxygen in the Refractory Metal 9 Discussion ........ 16 Acknowledgments 21 THE EFFECT OF OXYGEN ON THE CORROSION OF NIOBIUM AND TANTALUM BY LIQUID LITHIUM R. L.
    [Show full text]
  • Thermal Analysis of Tantalum Carbide-Hafnium Carbide Solid Solutions from Room Temperature to 1400 ◦C
    coatings Article Thermal Analysis of Tantalum Carbide-Hafnium Carbide Solid Solutions from Room Temperature to 1400 ◦C Cheng Zhang, Archana Loganathan, Benjamin Boesl and Arvind Agarwal * Plasma Forming Laboratory, Department of Mechanical and Materials Engineering, Florida International University, Miami, 33139 FL, USA; czhan009@fiu.edu (C.Z.); aloga006@fiu.edu (A.L.); bboesl@fiu.edu (B.B.) * Correspondence: agarwala@fiu.edu; Tel.: +1-305-348-1701 Received: 5 June 2017; Accepted: 25 July 2017; Published: 28 July 2017 Abstract: The thermogravimetric analysis on TaC, HfC, and their solid solutions has been carried out in air up to 1400 ◦C. Three solid solution compositions have been chosen: 80TaC-20 vol % HfC (T80H20), 50TaC-50 vol % HfC (T50H50), and 20TaC-80 vol % HfC (T20H80), in addition to pure TaC and HfC. Solid solutions exhibit better oxidation resistance than the pure carbides. The onset of oxidation is delayed in solid solutions from 750 ◦C for pure TaC, to 940 ◦C for the T50H50 sample. Moreover, T50H50 samples display the highest resistance to oxidation with the retention of the initial carbides. The oxide scale formed on the T50H50 sample displays mechanical integrity to prevent the oxidation of the underlying carbide solid solution. The improved oxidation resistance of the solid solution is attributed to the reaction between Ta2O5 and HfC, which stabilizes the volume changes induced by the formation of Ta2O5 and diminishes the generation of gaseous products. Also, the formation of solid solutions disturbs the atomic arrangement inside the lattice, which delays the reaction between Ta and O. Both of these mechanisms lead to the improved oxidation resistances of TaC-HfC solid solutions.
    [Show full text]
  • Ceramic Capacitors Replace Tantalum Capacitors in Ldos Jeff Falin
    Application Report SLVA214A–August 2005–Revised October 2006 Ceramic Capacitors Replace Tantalum Capacitors in LDOs Jeff Falin............................................................................................................. PMP Portable Power ABSTRACT With the proper considerations, ceramic output capacitors can be used with low dropout linear regulators (LDO) and DC/DC switching converters that require tantalum output capacitors. Many internally compensated linear regulators and switching converters require some equivalent series resistance (ESR) in the output capacitor, COUT. The control loop for these tantalum COUT-only converters relies on the zero that is created by the product of the output capacitance, COUT, and the ESR for stability. Converter data sheets typically provide a minimum (and possibly maximum ESR) value for a given output capacitance or the required frequency of the zero. For example, the data sheet for the TPS769xx family of linear regulators provides a curve of ESR versus output current for different output voltages(Figure 1). 10 W RegionofInstability 1 VO=3.3V CO=4.7 F VI =4.3V RegionofStability TA =25 C 0.1 ESR − EquivalentSeriesResistance − RegionofInstability 0.01 0 100 200 300 400 500 IO − OutputCurrent −m A Figure 1. Typical Region of Stability ESR Versus Output Current For various reasons including lower cost, smaller size, and/or reliability, some system engineers prefer to use ceramic capacitors instead of tantalum capacitors in their applications. A low-ESR ceramic output capacitor with a discrete series resistor can be used to replace a tantalum output capacitor. The schematic in Figure 2 shows such an implementation, using a 0.060-Ω series resistor and 4.7-µF ceramic output capacitor. This series combination of parts meets the TPS76933 ESR requirements shown in Figure 1; therefore, the linear regulator will be stable over the load range.
    [Show full text]
  • Tantalum Polymer and Niobium Oxide Capacitors
    New Tantalum Technologies Tantalum Polymer and Niobium OxideCapacitors T.Zedníček AVX Czech Republic s.r.o., Dvorakova 328, 563 01 Lanskroun, Czech Republic Phone: +420 465 358 126, Fax: +420 465 358 128, e-mail: [email protected] A B S T R A C T Tantalum has been a favored capacitor technology in space-limited designs and high reliability applications for a long time. Recent years have seen the emergence of one or two equivalent technologies offering many of the advantages of tantalum, such as volumetric efficiency and reliability. Two new technologies recently introduced into their commercialization phase are niobium oxide capacitors and tantalum capacitors with conductive polymer cathodes. A circuit designer trying to choose between these solid electrolyte capacitor systems has a number of trade- offs and subtleties of operation to consider. This paper reviews the main features of the two technologies, the latest electronic application needs and discusses the feasibility of the latest technology trends in tantalum, niobium oxide and polymer capacitors Introduction for these new technologies is much faster based on Conventional tantalum capacitors with a the knowledge already gained from “base” tantalum MnO2 second electrode system have proven to be a technology. Figure 1 shows the evolution of highly reliable solution with high volumetric efficiency downsizing on a very popular rating 100μF 6.3V. for over 50 years. Continuous improvements have led Evolution of 100uF 6.3V Downsizing to the development of higher CV (capacitance times 120 voltage constant) powders that have enabled the 100 D case creation of capacitors with higher capacitance in 80 smaller case size dimensions.
    [Show full text]
  • BNL-79513-2007-CP Standard Atomic Weights Tables 2007 Abridged To
    BNL-79513-2007-CP Standard Atomic Weights Tables 2007 Abridged to Four and Five Significant Figures Norman E. Holden Energy Sciences & Technology Department National Nuclear Data Center Brookhaven National Laboratory P.O. Box 5000 Upton, NY 11973-5000 www.bnl.gov Prepared for the 44th IUPAC General Assembly, in Torino, Italy August 2007 Notice: This manuscript has been authored by employees of Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The publisher by accepting the manuscript for publication acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. This preprint is intended for publication in a journal or proceedings. Since changes may be made before publication, it may not be cited or reproduced without the author’s permission. DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or any third party’s use or the results of such use of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof or its contractors or subcontractors.
    [Show full text]
  • Processing Development of 4Tac-Hfc and Related Carbides and Borides for Extreme Environments Osama Gaballa Gaballa Iowa State University
    Iowa State University Capstones, Theses and Graduate Theses and Dissertations Dissertations 2012 Processing development of 4TaC-HfC and related carbides and borides for extreme environments Osama Gaballa Gaballa Iowa State University Follow this and additional works at: https://lib.dr.iastate.edu/etd Part of the Mechanics of Materials Commons Recommended Citation Gaballa, Osama Gaballa, "Processing development of 4TaC-HfC and related carbides and borides for extreme environments" (2012). Graduate Theses and Dissertations. 12635. https://lib.dr.iastate.edu/etd/12635 This Dissertation is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Graduate Theses and Dissertations by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. Processing development of 4TaC-HfC and related carbides and borides for extreme environments by Osama Gaballa Bahig Gaballa A dissertation submitted to the graduate faculty in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY Major: Materials Science and Engineering Program of Study Committee: Alan M. Russell, Major Professor Vitalij Pecharsky Scott Chumbley Kristen Constant Sriram Sundararajan Iowa State University Ames, Iowa 2012 Copyright © Osama Gaballa Bahig Gaballa, 2012. All rights reserved. ii Table of Contents Abstract 1 Chapter 1: Introduction 4 1.1 Aluminum Silicon
    [Show full text]
  • The Elements.Pdf
    A Periodic Table of the Elements at Los Alamos National Laboratory Los Alamos National Laboratory's Chemistry Division Presents Periodic Table of the Elements A Resource for Elementary, Middle School, and High School Students Click an element for more information: Group** Period 1 18 IA VIIIA 1A 8A 1 2 13 14 15 16 17 2 1 H IIA IIIA IVA VA VIAVIIA He 1.008 2A 3A 4A 5A 6A 7A 4.003 3 4 5 6 7 8 9 10 2 Li Be B C N O F Ne 6.941 9.012 10.81 12.01 14.01 16.00 19.00 20.18 11 12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 3 Na Mg IIIB IVB VB VIB VIIB ------- VIII IB IIB Al Si P S Cl Ar 22.99 24.31 3B 4B 5B 6B 7B ------- 1B 2B 26.98 28.09 30.97 32.07 35.45 39.95 ------- 8 ------- 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 4 K Ca Sc Ti V Cr Mn Fe Co Ni Cu Zn Ga Ge As Se Br Kr 39.10 40.08 44.96 47.88 50.94 52.00 54.94 55.85 58.47 58.69 63.55 65.39 69.72 72.59 74.92 78.96 79.90 83.80 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 5 Rb Sr Y Zr NbMo Tc Ru Rh PdAgCd In Sn Sb Te I Xe 85.47 87.62 88.91 91.22 92.91 95.94 (98) 101.1 102.9 106.4 107.9 112.4 114.8 118.7 121.8 127.6 126.9 131.3 55 56 57 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 6 Cs Ba La* Hf Ta W Re Os Ir Pt AuHg Tl Pb Bi Po At Rn 132.9 137.3 138.9 178.5 180.9 183.9 186.2 190.2 190.2 195.1 197.0 200.5 204.4 207.2 209.0 (210) (210) (222) 87 88 89 104 105 106 107 108 109 110 111 112 114 116 118 7 Fr Ra Ac~RfDb Sg Bh Hs Mt --- --- --- --- --- --- (223) (226) (227) (257) (260) (263) (262) (265) (266) () () () () () () http://pearl1.lanl.gov/periodic/ (1 of 3) [5/17/2001 4:06:20 PM] A Periodic Table of the Elements at Los Alamos National Laboratory 58 59 60 61 62 63 64 65 66 67 68 69 70 71 Lanthanide Series* Ce Pr NdPmSm Eu Gd TbDyHo Er TmYbLu 140.1 140.9 144.2 (147) 150.4 152.0 157.3 158.9 162.5 164.9 167.3 168.9 173.0 175.0 90 91 92 93 94 95 96 97 98 99 100 101 102 103 Actinide Series~ Th Pa U Np Pu AmCmBk Cf Es FmMdNo Lr 232.0 (231) (238) (237) (242) (243) (247) (247) (249) (254) (253) (256) (254) (257) ** Groups are noted by 3 notation conventions.
    [Show full text]
  • Polymer Guide Guide for Tantalum Solid Electrolyte Chip Capacitors
    Polymer Guide www.vishay.com Vishay Guide for Tantalum Solid Electrolyte Chip Capacitors With Polymer Cathode INTRODUCTION Rating for rating, tantalum capacitors tend to have as much Tantalum electrolytic capacitors are the preferred choice in as three times better capacitance/volume efficiency than applications where volumetric efficiency, stable electrical aluminum electrolytic capacitors. An approximation of the parameters, high reliability, and long service life are primary capacitance/volume efficiency of other types of capacitors considerations. The stability and resistance to elevated may be inferred from the following table, which shows the temperatures of the tantalum/tantalum oxide/manganese dielectric constant ranges of the various materials used in dioxide system make solid tantalum capacitors an each type. Note that tantalum pentoxide has a dielectric appropriate choice for today's surface mount assembly constant of 26, some three times greater than that of technology. aluminum oxide. This, in addition to the fact that extremely thin films can be deposited during the electrolytic process Vishay Sprague has been a pioneer and leader in this field, mentioned earlier, makes the tantalum capacitor extremely producing a large variety of tantalum capacitor types for efficient with respect to the number of microfarads available consumer, industrial, automotive, military, and aerospace per unit volume. The capacitance of any capacitor is electronic applications. determined by the surface area of the two conducting Tantalum is not found in its pure state. Rather, it is plates, the distance between the plates, and the dielectric commonly found in a number of oxide minerals, often in constant of the insulating material between the plates.
    [Show full text]
  • Eparating the Columbium and Tantalum Salts Or Oxides from Each Other
    TANTALUM, COLUMBIUM, AND FERROCOLUMBIUM A. Commodity Summary Tantalum is used in the electronics industry, as well as in aerospace and transportation applications. Columbium (the commonly used synonym for the element niobium) is used as an alloying element in steels and in superalloys. Tantalum and columbium are often found together in pyrochlore and baripyrochlore, the main columbium containing minerals, as well as in columbite. These minerals contain relatively small amounts of tantalum, pyrochlore, and baripyrochlore, having a columbium pentoxide-to-tantalum pentoxide ratio of 200 to 1 or greater.1 Columbite contains slightly larger amounts (up to eight percent) of tantalum.2 Tantalite is the primary source of tantalum pentoxide, and contains small amounts of columbium pentoxide. Microlite is another source of tantalum pentoxide. Tantalum is also recovered from tin slags.3 There has been no significant mining of tantalum or columbium ores in the United States since 1959. Producers of columbium metal and ferrocolumbium use imported concentrates, columbium pentoxide, and ferrocolumbium. Tantalum products are made from imported concentrates and metal, and foreign/domestic scrap.4 Ferrocolumbium is an alloy of iron and columbium. Ferrocolumbium is used principally as an additive to improve the strength and corrosion resistance of steel used in high strength linepipe, structural members, lightweight components in cars and trucks, and exhaust manifolds. High purity ferrocolumbium is used in superalloys for applications such as jet engine components, rocket assemblies, and heat-resisting and combustion equipment.5 Exhibit 1 summarizes the principal producers of tantalum, columbium and ferrocolumbium in the United States in 1992. Only Cabot Corporation and Shieldalloy Metallurgical Corporation use ores as their starting material.6 B.
    [Show full text]